Base Station Antennas

Base Station AntennasRosenberger Asia Pacific Electronic Co., Ltd. No.3, Anxiang Street, Block B, Tianzhu Airport Industrial Zone Beijing, China 101300 Tel : (+86 10) 80481995 Fax : (+86 10) 80497052 Email: [email protected] Rosenberger (Shanghai) Technology Co.,Ltd. No. 303, Xinke Road, Qingpu Industrial Zone Shanghai, China 201707 Tel : (+86 21) 69214567 Fax : (+86 21) 69212923 Rosenberger Asia Pacific Electronic Co., Ltd. Shanghai Division B7, No. 509, Renqing Road, East Zone of Zhangjiang High-Tech Park Shanghai, China 201201 Tel : (+86 21) 58995997 Fax : (+86 21) 58995594 Rosenberger Asia Pacific Electronic Co., Ltd. Dongguan Division 3rd Floor, Building E, Pingqian Industrial Park, Dongkeng Town Dongguan, Guangdong Province, China Tel : (+86 769) 82802098 Fax : (+86 769) 82802099 Base Station Antennas Rosenberger All rights reserved. 1st Edition, 2013 Please visit our website: www.RosenbergerAP.com www.RosenbergerAP.com Rosenberger HQ, Bavaria, Germany Introduction Rosenberger Hochfrequenztechnik GmbH&Co. was founded in Germany in 1958 and ranks among the leading manufacturers of high-speed interconnect solutions worldwide. To serve the continuous growth and demand of the global market, Rosenberger Asia Pacific Electronic Co., Ltd. was established in China in 1997. With its long tradition of excellence and providing creative solutions, Rosenberger Asia Pacific has excelled and earned an outstanding reputation in the Asia Pacific region. Rosenberger Asia Pacific provides products and solutions for Telecommunication, Automotive Electronics, Information Technology, Test & Measurement, Aviation, and Medical & Industries. Their product portfolio includes: • RF In-Cabinet Connection Solutions • Total Site Solutions for Base Station Applications • In-Building Wireless Solutions and Enhancement • Microwave Transmission Systems • Passive Intermodulation Analyzers • FTTX • Data Center Cabling Systems www.RosenbergerAP.com A B C D Rosenberger Asia Pacific: A: Beijing − Headquarters, R&D, and Production B: Shanghai Zhangjiang − R&D and Production C: Shanghai Qingpu − R&D and Production E D: India − R&D and Production E: Dongguan − R&D and Production A sales network covering the entire Asia Pacific region generates an annual turnover close to 200 million USD. Reliability and competitiveness are the cornerstones of this sustainable growth, resulting in long term partnerships with most of the leading companies in their respective industries. Rosenberger Asia Pacific maintains 6 modern manufacturing and R&D base locations in Beijing, Shanghai, and Dongguan in China; and New Delhi in India, the largest of its kind in the Asia Pacific Region. Rosenberger Asia Pacific is an ISO 9001 quality system, ISO 14001 environmental system, and ISO/TS16949 automotive industry system certified company. Equipped with advanced machining, electronic plating, assembly and testing centers and staffed by a large group of more then 200 R&D engineers, Rosenberger Asia Pacific has developed first class production assembly lines and exercises stringent product and quality control. Presently, Rosenberger Asia Pacific maintains a far reaching network of R&D, Production, Sales and Service which extends to the whole Asia Pacific and Middle East area. For over 50 years Rosenberger has established its brand all over the world. In the future, Rosenberger Asia Pacific will continue to provide excellent product solutions and services for its customers in the entire region. www.RosenbergerAP.com customized services and cost effective solutions • Maintain the highest quality standards. manufacture and deploy total solutions for telecommunication networks worldwide • Create value for our customers through innovative products.RosenbergerAP. state-of-the-art manufacturing facilities and employ reliable supply chain management to achieve and exceed customer expectations • Be socially responsible to our community and environment • Be committed to employee's personnel development Core Value • Value Innovation • Customer Focus • Sustainable Growth • Social Responsibility www.MISSION STATEMENT • Design.com . com .PRODUCT PORTFOLIOS Base Station Antenna Feeder Systems Wireless Coverage Optimization Solutions Microwave Backhaul Solutions RF In-cabinet Solutions Telecommunication System Solutions Passive Intermodulation Measurement Systems FTTA/FTTH Optical Fiber Solutions OSP Fiber Optic Outdoor Plant Solutions In-building Optical Network Connectivity Solutions Low Frequency Cables and Components Network Optimization Services Premise Network Cabling Products IT/Data Communication Data Center/Cloud Computing Solutions Intelligent Infrastructure Management System Test Cables Testing and Measurement Precision Connectors Calibrations Accessories and Tools Automotive FAKRA Connectors and Cable Assemblies HSD® System Non-Magnetic RF Connectors Non-Magnetic RF Cable Assemblies Medical & Industrial Data/RF/Power/DC Hybrid Connectors and Assemblies Custom Data/Power Connectivity System Fiber Optic Connectivity Products www.RosenbergerAP. CONTENT Rosenberger S-Wave® antenna technology 06 ———————————————————————————————————————————————— Part Number Guide 08 ———————————————————————————————————————————————— Antenna Index 09 ———————————————————————————————————————————————— Omni-directional Antennas 14 ———————————————————————————————————————————————— Low Band Panel Antennas 698-960MHz Dual Polarization +45°/–45° 18 ———————————————————————————————————————————————— Low Band Panel Antennas 806-960MHz Vertical Polarization 30 ———————————————————————————————————————————————— High Band Panel Antennas 1710-2170MHz Dual Polarization +45°/–45° 38 ———————————————————————————————————————————————— High Band Panel Antennas 1710-2170MHz Vertical Polarization 47 ———————————————————————————————————————————————— Dual Band Antennas 2 Ports (with built-in Combiner) Dual Polarization +45°/–45° 51 ———————————————————————————————————————————————— Dual Band Antennas 4 Ports Dual Polarization +45°/–45° 61 ———————————————————————————————————————————————— Triple Band Antennas 6 Ports Dual Polarization +45°/–45° 71 ———————————————————————————————————————————————— Multi-Band Antennas Dual Polarization +45°/–45° 75 ———————————————————————————————————————————————— Tri-Sector Antennas Dual Polarization +45°/–45° 78 ———————————————————————————————————————————————— LTE Extra-wide Band Antennas 1710-2690MHz Dual Polarization +45°/–45° 80 ———————————————————————————————————————————————— REMOTE ELECTRICAL TILT 85 ———————————————————————————————————————————————— Installation Kits 93 ———————————————————————————————————————————————— Rosenberger Service 97 ———————————————————————————————————————————————— . 05 Rosenberger S-Wave® antenna technology Base Station Antennas 06 . Rosenberger is committed to supplying the highest quality and most costeffective antenna solutions. simulation and optimization. SolidWorks. the S-Wave® antenna guarantees excellent mechanical and electrical performance. DCS. GSM. They are designed to meet the toughest applications and operating requirements covering single band.OUTLINE Rosenberger’s S-Wave® antenna products cover several frequency bands: 700LTE. AMPS. broadband and multi-band. These mechanical and electrical design tools allow Rosenberger’s design team to analyze and optimize the design and integration of antenna radiation/circuits for every application. AutoCAD. and 4G-LTE. Every antenna series is based on the experience and solid theoretical knowledge of our international R&D team. UMTS. Through extensive testing. Design Philosophy Rosenberger adopts many state-of-the-art CAD simulation tools including ANSYS HFSS. WiMAX. AWS. . PCS. 07 Part Number Guide Frequency Range Gain. B3…. x=tilt angle U 1710-2170 Vx = Adjustable electrical tilt. Polarization.65/65/90 .F Horizontal Beamwidth Frequency Group Special Designation Special Designation Meaning Electrical Specifications Frequency band (MHz) C With built-in combiner 07 698-896 S Tri-sector (3-in-1) antenna 08 806-896 A 09 870-960 Upgraded version (higher performance) 0709 790-960 B1. B2.14/14/17DV15/V15/V8 CS . start angle=s and x=end angle Horizontal Beamwidth Examples Symbol Horizontal 3dB Beamwidth (°) Quad antenna: 65 65° S-Wave 0709/0709/U/U-65-15/15/17/17DV15/V15/V8/V8-F 90 90° OD 360° Polarization Blank = Vertical polarization D = +/-45° polarization Radome material Blank = UPVC F = Fiberglass 08 . Customized version 0809 806-960 18 1710-1880 Electrical tilt 19 1850-1990 Blank = Fixed 0° electrical tilt 21 1920-2170 Tx = Fixed electrical tilt. Tilt Radome Material S-Wave 09/U/U . start angle=0° and x=end angle EW 1710-2690 Vs/x = Adjustable electrical tilt. 5dBi 3° 27 S-Wave 0809-90-15.5DT3 806-960 30° 18.5dBi 6° 19 S-Wave 0809-30-21D 806-960 30° 21dBi 0° 20 S-Wave 0809-30-21DT3 806-960 30° 21dBi 3° 20 S-Wave 0809-30-21DT6 806-960 30° 21dBi 6° 20 S-Wave 0809-65-15D 806-960 65° 15dBi 0° 21 S-Wave 0809-65-15DT3 806-960 65° 15dBi 3° 21 S-Wave 0809-65-15DT6 806-960 65° 15dBi 6° 21 S-Wave 0809-65-16.5dBi 0°-10° 25 S-Wave 0809-65-18DV8 806-960 65° 18dBi 0°-8° 26 S-Wave 0809-90-15.5DV10 806-960 65° 16.5dBi 0° 27 S-Wave 0809-90-15.5DT3 806-960 65° 16.5DT3 806-960 90° 15.5DT6 806-960 65° 16.5dBi 0° 22 S-Wave 0809-65-16.5dBi 3° 19 S-Wave 0809-30-18.5dBi 0° 19 S-Wave 0809-30-18.5D 806-960 65° 16.Antenna Index Omni-Directional Antennas Vertical Polarization Type Frequency (MHz) Gain Tilt Page S-Wave 09-OD-11-F 870-960 Horizontal Beamwidth 360° 11dBi 0° 15 S-Wave 18-OD-11-F 1710-1880 360° 11dBi 0° 16 S-Wave 21-OD-11-F 1920-2170 360° 11dBi 0° 17 Low Band Panel Antennas 698-960MHz Dual Polarization +45°/–45° Type Frequency (MHz) Gain Tilt Page S-Wave 0809-30-18.5dBi 3° 22 S-Wave 0809-65-16.5dBi 6° 27 S-Wave 0809-90-17D 806-960 90° 17dBi 0° 28 S-Wave 0809-90-17DT3 806-960 90° 17dBi 3° 28 S-Wave 0809-90-17DT6 806-960 90° 17dBi 6° 28 S-Wave 0809-90-17DV10 806-960 90° 17dBi 0°-10° 29 .5DT6 806-960 90° 15.5DT6 806-960 30° 18.5D 806-960 Horizontal Beamwidth 30° 18.5D 806-960 90° 15.5dBi 6° 22 S-Wave 0809-65-18D 806-960 65° 18dBi 0° 23 S-Wave 0809-65-18DT3 806-960 65° 18dBi 3° 23 S-Wave 0809-65-18DT6 806-960 65° 18dBi 6° 23 S-Wave 0809-65-15DV15 806-960 65° 15dBi 0°-15° 24 S-Wave 0809-65-16. 09 Low Band Panel Antennas 806-960MHz Vertical Polarization Type Frequency (MHz) Gain Tilt Page S-Wave 0809-30-20 806-960 Horizontal Beamwidth 30° 20dBi 0° 31 S-Wave 0809-30-20T3 806-960 30° 20dBi 3° 31 S-Wave 0809-30-20T6 806-960 30° 20dBi 6° 31 S-Wave 08-65-15 806-896 65° 15dBi 0° 32 S-Wave 08-65-15T3 806-896 65° 15dBi 3° 32 S-Wave 08-65-15T6 806-896 65° 15dBi 6° 32 S-Wave 08-65-17 806-896 65° 17dBi 0° 33 S-Wave 08-65-17T3 806-896 65° 17dBi 3° 33 S-Wave 08-65-17T6 806-896 65° 17dBi 6° 33 S-Wave 08-65-18 806-896 65° 18dBi 0° 34 S-Wave 08-65-18T3 806-896 65° 18dBi 3° 34 S-Wave 08-65-18T6 806-896 65° 18dBi 6° 34 S-Wave 09-65-15 870-960 65° 15dBi 0° 35 S-Wave 09-65-15T3 870-960 65° 15dBi 3° 35 S-Wave 09-65-15T6 870-960 65° 15dBi 6° 35 S-Wave 09-65-17 870-960 65° 17dBi 0° 36 S-Wave 09-65-17T3 870-960 65° 17dBi 3° 36 S-Wave 09-65-17T6 870-960 65° 17dBi 6° 36 S-Wave 09-65-18 870-960 65° 18dBi 0° 37 S-Wave 09-65-18T3 870-960 65° 18dBi 3° 37 S-Wave 09-65-18T6 870-960 65° 18dBi 6° 37 Gain Tilt Page High Band Panel Antennas 1710-2170MHz Dual Polarization +45°/–45° Type Frequency (MHz) Horizontal Beamwidth S-Wave U-33-21D 1710-2170 33° 21dBi 0° 39 S-Wave U-33-21DT3 1710-2170 33° 21dBi 3° 39 S-Wave U-33-21DT6 1710-2170 33° 21dBi 6° 39 S-Wave U-65-15.5dBi 0° 40 S-Wave U-65-15.5dBi 3° 40 S-Wave U-65-15.5D 1710-2170 65° 15.5DT3 1710-2170 65° 15.5dBi 6° 40 S-Wave U-65-18D 1710-2170 65° 18dBi 0° 41 S-Wave U-65-18DT3 1710-2170 65° 18dBi 3° 41 S-Wave U-65-18DT6 1710-2170 65° 18dBi 6° 41 S-Wave U-65-19D 1710-2170 65° 19dBi 0° 42 S-Wave U-65-19DT3 1710-2170 65° 19dBi 3° 42 S-Wave U-65-19DT6 1710-2170 65° 19dBi 6° 42 S-Wave U-65-15DV15 1710-2170 65° 15dBi 0°-15° 43 S-Wave U-65-18DV10 1710-2170 65° 18dBi 0°-10° 44 S-Wave U-90-17D 1710-2170 90° 17dBi 0° 45 S-Wave U-90-17DT3 1710-2170 90° 17dBi 3° 45 S-Wave U-90-17DT6 1710-2170 90° 17dBi 6° 45 S-Wave U-90-17DV10 1710-2170 90° 17dBi 0°-10° 46 10 .5DT6 1710-2170 65° 15. High Band Antennas 1710-2170MHz Vertical Polarization Type Frequency (MHz) Gain Tilt Page S-Wave 18-65-18 1710-1880 Horizontal Beamwidth 65° 18dBi 0° 48 S-Wave 18-65-18T3 1710-1880 65° 18dBi 3° 48 S-Wave 18-65-18T6 1710-1880 65° 18dBi 6° 48 S-Wave 21-65-18 1920-2170 65° 18dBi 0° 49 S-Wave 21-65-18T3 1920-2170 65° 18dBi 3° 49 S-Wave 21-65-18T6 1920-2170 65° 18dBi 6° 49 S-Wave U-65-18 1710-2170 65° 18dBi 0° 50 S-Wave U-65-18T3 1710-2170 65° 18dBi 3° 50 S-Wave U-65-18T6 1710-2170 65° 18dBi 6° 50 Page Dual Band Antennas 2 ports (with Built-in Combiner) Dual Polarization +45°/–45° Type S-Wave 0709/U-65-15/17DC-F S-Wave 0709/U-65-15/17DT6C-F S-Wave 0709/U-65-15/17DV15/10C-F S-Wave 0709/U-65-16/18DC-F S-Wave 0709/U-65-16/18DT6C-F S-Wave 0709/U-65-16/18DV10/8C-F S-Wave 0709/U-65-17/18DC-F S-Wave 0709/U-65-17/18DT6C-F S-Wave 0709/U-65-17/18DV8C-F Frequency (MHz) Gain Tilt 790-960 Horizontal Beamwidth 65° 15dBi 0° 1710-2170 65° 17dBi 0° 790-960 65° 15dBi 6° 1710-2170 65° 17dBi 6° 790-960 65° 15dBi 0°-15° 1710-2170 65° 17dBi 0°-10° 790-960 65° 16dBi 0° 1710-2170 65° 18dBi 0° 790-960 65° 16dBi 6° 1710-2170 65° 18dBi 6° 790-960 65° 16dBi 0°-10° 1710-2170 65° 18dBi 0°-8° 790-960 65° 17dBi 0° 1710-2170 65° 18dBi 0° 790-960 65° 17dBi 6° 1710-2170 65° 18dBi 6° 790-960 65° 17dBi 0°-8° 1710-2170 65° 18dBi 0°-8° 52 53 54 55 56 57 58 59 60 11 Dual Band Antennas 4 ports Dual Polarization +45°/–45° Type S-Wave 0709/U-65-15/17D-F S-Wave 0709/U-65-15/17DT6-F S-Wave 0709/U-65-15/17DV15/10-F S-Wave 0709/U-65-16/18D-F S-Wave 0709/U-65-16/18DT6-F S-Wave 0709/U-65-16/18DV10/V8-F S-Wave 0709/U-65-17/18D-F S-Wave 0709/U-65-17/18DT6-F S-Wave 0709/U-65-17/18DV8-F Frequency (MHz) Gain Tilt 790-960 Horizontal Beamwidth 65° 15dBi 0° 1710-2170 65° 17dBi 0° 790-960 65° 15dBi 6° 1710-2170 65° 17dBi 6° 790-960 65° 15dBi 0°-15° 1710-2170 65° 17dBi 0°-10° 790-960 65° 16dBi 0° 1710-2170 65° 18dBi 0° 790-960 65° 16dBi 6° 1710-2170 65° 18dBi 6° 790-960 65° 16dBi 0°-10° 1710-2170 65° 18dBi 0°-8° 790-960 65° 17dBi 0° 1710-2170 65° 18dBi 0° 790-960 65° 17dBi 6° 1710-2170 65° 18dBi 6° 790-960 65° 17dBi 0°-8° 1710-2170 65° 18dBi 0°-8° Page 62 63 64 65 66 67 68 69 70 Triple Band Antennas 6 ports Dual Polarization +45°/–45° Type S-Wave 0709/U/U-65-15DV15-F S-Wave 0709/U/U-65-16DV8/V12/V12-F S-Wave 0709/U/U-65-17DV8/V10/V10-F Frequency (MHz) Gain Tilt 790-960 Horizontal Beamwidth 65° 15dBi 0°-15° 1710-2170 65° 15dBi 0°-15° 1710-2170 65° 15dBi 0°-15° 790-960 65° 16dBi 0°-8° 1710-2170 65° 16dBi 0°-12° 1710-2170 65° 16dBi 0°-12° 790-960 65° 17dBi 0°-8° 1710-2170 65° 17dBi 0°-10° 1710-2170 65° 17dBi 0°-10° Page 72 73 74 12 Multi-Band Antennas Dual Polarization +45°/–45° Type S-Wave 0709/EW/EW-6517/18/18DV10-F S-Wave 0709/EW/EW/EW/EW-6517/18/18/18/18DV10-F Frequency (MHz) Gain Tilt 790-960 Horizontal Beamwidth 65° 17dBi 0°-10° 1710-2690 65° 18dBi 0°-10° 1710-2690 65° 18dBi 0°-10° 790-960 65° 17dBi 0°-10° 1710-2690 65° 18dBi 0°-10° 1710-2690 65° 18dBi 0°-10° 1710-2690 65° 18dBi 0°-10° 1710-2690 65° 18dBi 0°-10° Page 76 77 Tri-Sector Antennas Dual Polarization +45°/–45° Type S-Wave U-65-18DV10S Frequency (MHz) Gain Tilt 1710-2170 Horizontal Beamwidth 65° 18dBi 0°-8° 1710-2170 65° 18dBi 0°-8° 1710-2170 65° 18dBi 0°-8° Page 79 LTE Extra-wide Band Antennas 1710-2690MHz Dual Polarization +45°/–45° Type Frequency (MHz) Gain Tilt Page S-Wave EW-65-15DV15 1710-2690 65° 15dBi 0°-15° 81 S-Wave EW-65-18DV10 1710-2690 65° 18dBi 0°-10° 82 1710-2690 65° 15dBi 0°-15° 1710-2690 65° 15dBi 0°-15° 1710-2690 65° 18dBi 0°-10° 1710-2690 65° 18dBi 0°-10° S-Wave EW/EW-65-15DV15 S-Wave EW/EW-65-18DV10 Horizontal Beamwidth 83 84 Remote Electrical Tilt 85 Installation Kits 93 13 OMNI-DIRECTIONAL ANTENNAS VERTICAL Polarization Base Station Antennas 14 . Power Per Input 500W Mechanical Specifications Connector Type 1 X 7-16 DIN(F) Weight 7.5 Max.5º Electrical Down Tilt 0º. Wind Velocity 200km/h Dimension Ø65 X 3560mm Radome Material Fiberglass Horizontal Pattern Vertical Pattern 870-960 7-16 DIN .5kg Max.Omni-Directional 870-960MHz 11dBi Part Number S-Wave 09-OD-11-F Electrical Specifications Frequency Range 870-960MHz Polarization Vertical Gain 11dBi Horizontal 3dB Beam Width 360 Vertical 3dB Beam Width 7. Fixed Impedance 50Ω VSWR ＜ 1. 15 Omni-Directional 1710-1880MHz 11dBi Part Number S-Wave 18-OD-11-F Electrical Specifications Frequency Range 1710-1880MHz Polarization Vertical Gain 11dBi Horizontal 3dB Beam Width 360 Vertical 3dB Beam Width 7º Electrical Down Tilt 0º. Power Per Input 500W Mechanical Specifications Connector Type 1 X 7-16 DIN(F) Weight 6. Fixed Impedance 50Ω VSWR ＜ 1.5kg Max.5 Max. Wind Velocity 200km/h Dimension Ø65 X 1800mm Radome Material Fiberglass Horizontal Pattern Vertical Pattern 1710-1880 7-16 DIN 16 . Omni-Directional 1920-2170MHz 11dBi Part Number S-Wave 21-OD-11-F Electrical Specifications Frequency Range 1920-2170MHz Polarization Vertical Gain 11dBi Horizontal 3dB Beam Width 360 Vertical 3dB Beam Width 6. Wind Velocity 200km/h Dimension Ø65 X 1500mm Horizontal Pattern Vertical Pattern 1920-2170 7-16 DIN .5kg Max.5º Electrical Down Tilt 0º.5 Max. Fixed Impedance 50Ω VSWR ＜ 1. Power Per Input 500W Mechanical Specifications Connector Type 1 X 7-16 DIN(F) Weight 5. 17 Low Band Panel Antennas 698-960MHz Dual Polarization +45°/–45° Base Station Antennas 18 . 5DT6 Part Number Electrical Specifications Frequency Range 806-896MHz 870-960MHz Polarization ±45º ±45º Gain 18dBi 18.5DT3 S-Wave 0809-30-18.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max. 6º.5D S-Wave 0809-30-18.5dBi FET0º. Power Per Input 500W Horizontal Pattern 806-896MHz Horizontal Pattern Vertical Pattern 806-960 +45º 806-960 -45º 7-16 DIN 7-16 DIN Vertical Pattern 870-960MHz Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 22kg Max. 0º ±60º ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1. 6º S-Wave 0809-30-18. 3º.5dBi Horizontal 3dB Beam Width 31º 29º Vertical 3dB Beam Width 15º 14º Electrical Down Tilt 0º.Xpol Panel 806-960 30º 18. Fixed 0º. Fixed First Upper Sidelobe Suppression ＞ 15dB ＞ 15dB Front to Back Ratio. 3º. 3º. Wind Velocity 200km/h Dimension 1296 X 565 X 100mm . 180º±30º ＞ 30dB ＞ 30dB Isolation ＞ 30dB ＞ 30dB Cross-polar Ratio. 6º. 19 Xpol Panel 806-960 30º 21dBi FET0º.5º Electrical Down Tilt 0º.5º 7. Fixed 0º. 3º. 6º. 180º±30º ＞ 30dB ＞ 30dB Isolation ＞ 30dB ＞ 30dB Cross-polar Ratio. 3º. 3º. Fixed First Upper Sidelobe Suppression ＞ 15 dB ＞ 15dB Front to Back Ratio.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max. Power Per Input 500W Horizontal Pattern 806-896MHz Horizontal Pattern Vertical Pattern 806-960 +45º 806-960 -45º 7-16 DIN 7-16 DIN Vertical Pattern 870-960MHz Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 40kg Max. Wind Velocity 200km/h Dimension 2416 X 565 X 100mm 20 . 6º.5dBi Horizontal 3dB Beam Width 31º 29º Vertical 3dB Beam Width 8. 0º ±30º ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1. 6º S-Wave 0809-30-21D S-Wave 0809-30-21DT3 S-Wave 0809-30-21DT6 Part Number Electrical Specifications Frequency Range 806-896MHz 870-960MHz Polarization ±45º ±45º Gain 20dBi 20. 0º ±60º ＞ 15dB ＞ 10dB ＞ 15dB ＞ 10dB Impedance 50Ω VSWR ＜ 1. 3º. Wind Velocity 200km/h Dimension 1310 X 295 X 115mm .4 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max. 3º. 6º.Xpol Panel 806-960 65º 15dBi FET0º. 6º. 6º Part Number S-Wave 0809-65-15D S-Wave 0809-65-15DT3 S-Wave 0809-65-15DT6 Electrical Specifications Frequency Range 806-896MHz 870-960MHz Polarization ±45º ±45º Gain 15dBi 15dBi Horizontal 3dB Beam Width 65º 65º Vertical 3dB Beam Width 15º 15º Electrical Down Tilt 0º. Fixed Front to Back Ratio. 180º±30º ＞ 30dB ＞ 30dB Isolation ＞ 30dB ＞ 30dB Cross-polar Ratio. Power Per Input 500W Horizontal Pattern 806-896MHz Horizontal Pattern Vertical Pattern 806-960 +45º 806-960 -45º 7-16 DIN 7-16 DIN Vertical Pattern 870-960MHz Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 11kg Max. Fixed 0º. 3º. 5DT6 Part Number Electrical Specifications Frequency Range 806-896MHz 870-960MHz Polarization ±45º ±45º Gain 16.5dBi 16. Fixed First Upper Sidelobe Suppression ＞ 16dB ＞ 16dB Front to Back Ratio.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max. 3º. Fixed 0º.5D S-Wave 0809-65-16.5dBi FET0º. 0º ±60º ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1. 3º. 6º S-Wave 0809-65-16.5DT3 S-Wave 0809-65-16. Wind Velocity 200km/h Dimension 1996 X 282 X 100mm 22 . 6º. 6º. 180º±30º ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB Cross-polar Ratio.21 Xpol Panel 806-960 65º 16. 3º. Power Per Input 500W Horizontal Pattern 806-896MHz Horizontal Pattern Vertical Pattern 806-960 +45º 806-960 -45º 7-16 DIN 7-16 DIN Vertical Pattern 870-960MHz Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 18kg Max.5dBi Horizontal 3dB Beam Width 65º 65º Vertical 3dB Beam Width 10º 9º Electrical Down Tilt 0º. 5dBi 17.5 dBi Horizontal 3dB Beam Width 65º 65º Vertical 3dB Beam Width 7º 7º Electrical Down Tilt 0º. Fixed First Upper Sidelobe Suppression ＞ 16dB ＞ 16dB Front to Back Ratio. 3º. Wind Velocity 200km/h Dimension 2640 X 295 X 115mm .Xpol Panel 806-960 65º 18dBi FET0º. Power Per Input 500W Horizontal Pattern 806-896MHz Horizontal Pattern Vertical Pattern 806-960 +45º 806-960 -45º 7-16 DIN 7-16 DIN Vertical Pattern 870-960MHz Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 17kg Max. 3º. 6º. 180º±30º ＞ 30dB ＞ 30dB Isolation ＞ 30dB ＞ 30dB Cross-polar Ratio. 0º ±60º ＞ 15dB ＞ 10dB ＞ 15dB ＞ 10dB Impedance 50Ω VSWR ＜ 1. Fixed 0º. 6º.4 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max. 6º S-Wave 0809-65-18D S-Wave 0809-65-18DT3 S-Wave 0809-65-18DT6 Part Number Electrical Specifications Frequency Range 806-896MHz 870-960MHz Polarization ±45º ±45º Gain 17. 3º. 23 Xpol Panel 806-960 65º 15dBi VET 0º-15º Adjustable Electrical Down Tilt: manual or optional Antenna Control Unit (ACU) Part Number S-Wave 0809-65-15DV15 Electrical Specifications Frequency Range 806-896MHz 870-960MHz Polarization ±45º ±45º Gain 15dBi 15dBi Horizontal 3dB Beam Width 65º 65º Vertical 3dB Beam Width 15º 15º Electrical Down Tilt 0º-15º 0º-15º Front to Back Ratio.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max. Power Per Input 500W Horizontal Pattern 806-896MHz Horizontal Pattern Vertical Pattern 806-960 +45º 806-960 -45º 7-16 DIN 7-16 DIN Vertical Pattern 870-960MHz Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 8kg Max. 0º ±60º ＞ 15dB ＞ 10dB ＞ 15dB ＞ 10dB Impedance 50Ω VSWR ＜ 1. Wind Velocity 200km/h Dimension 1445 X 289 X 134mm 24 . 180º±30º ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB Cross-polar Ratio. 5DV10 Electrical Specifications Frequency Range 806-896MHz 870-960MHz Polarization ±45º ±45º Gain 16.Xpol Panel 806-960 65º 16.5dBi Horizontal 3dB Beam Width 68º 65º Vertical 3dB Beam Width 10º 9. Power Per Input 400W Horizontal Pattern 806-896MHz Horizontal Pattern Vertical Pattern 806-960 +45º 806-960 -45º 7-16 DIN 7-16 DIN Vertical Pattern 870-960MHz Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 18kg Max. 0º ±60º ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1.5º Electrical Down Tilt 0º-10º 0º-10º Front to Back Ratio.5dBi 16. 180º±30º ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB Cross-polar Ratio.5dBi VET 0º-10º Adjustable Electrical Down Tilt: manual or optional ACU Part Number S-Wave 0809-65-16. Wind Velocity 200km/h Dimension 1996 X 282 X 100mm .5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max. Wind Velocity 200km/h Dimension 2640 X 282 X 100mm 26 .3º Electrical Down Tilt 0º-8º 0º-8º Front to Back Ratio. 180º±30º ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB Cross-polar Ratio.5dBi 17.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max.25 Xpol Panel 806-960 65º 18dBi VET 0º-8º Adjustable Electrical Down Tilt: manual or optional ACU Part Number S-Wave 0809-65-18DV8 Electrical Specifications Frequency Range 806-896MHz 870-960MHz Polarization ±45º ±45º Gain 17. Power Per Input 500W Horizontal Pattern 806-896MHz Horizontal Pattern Vertical Pattern 806-960 +45º 806-960 -45º 7-16 DIN 7-16 DIN Vertical Pattern 870-960MHz Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 23kg Max. 0º ±60º ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1.8dBi Horizontal 3dB Beam Width 68º 65º Vertical 3dB Beam Width 7.5º 7. Xpol Panel 806-960 90º 15.5dBi FET0º, 3º, 6º S-Wave 0809-90-15.5D S-Wave 0809-90-15.5DT3 S-Wave 0809-90-15.5DT6 Part Number Electrical Specifications Frequency Range 806-896MHz 870-960MHz Polarization ±45º ±45º Gain 15 .3dBi 15.5dBi Horizontal 3dB Beam Width 90º 88º Vertical 3dB Beam Width 10.5º 10º Electrical Down Tilt 0º, 3º, 6º, Fixed 0º, 3º, 6º, Fixed First Upper Sidelobe Suppression ＞ 15dB ＞ 15dB Front to Back Ratio, 180º±30º ＞ 23dB ＞ 23dB Isolation ＞ 30dB ＞ 30dB Cross-polar Ratio, 0º ±60º ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max, Power Per Input 500W Horizontal Pattern 806-896MHz Horizontal Pattern Vertical Pattern 806-960 +45º 806-960 -45º 7-16 DIN 7-16 DIN Vertical Pattern 870-960MHz Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 14kg Max. Wind Velocity 200km/h Dimension 1936 X 282 X 100mm 27 Xpol Panel 806-960 90º 17dBi FET0º, 3º, 6º S-Wave 0809-90-17D S-Wave 0809-90-17DT3 S-Wave 0809-90-17DT6 Part Number Electrical Specifications Frequency Range 806-896MHz 870-960MHz Polarization ±45º ±45º Gain 16.5dBi 17dBi Horizontal 3dB Beam Width 90º 85º Vertical 3dB Beam Width 7.5º 7º Electrical Down Tilt 0º, 3º, 6º, Fixed 0º, 3º, 6º, Fixed First Upper Sidelobe Suppression ＞ 16dB ＞ 16dB Front to Back Ratio, 180º±30º ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB Cross-polar Ratio, 0º ±60º ＞ 15dB ＞ 10dB ＞ 15dB ＞ 10dB Impedance 50Ω VSWR ＜ 1.4 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max, Power Per Input 500W Horizontal Pattern 806-896MHz Horizontal Pattern Vertical Pattern 806-960 +45º 806-960 -45º 7-16 DIN 7-16 DIN Vertical Pattern 870-960MHz Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 22kg Max. Wind Velocity 200km/h Dimension 2650 X 295 X 145mm 28 Xpol Panel 806-960 90º 17dBi VET 0º-10º Adjustable Electrical Down Tilt: manual or optional ACU Part Number S-Wave 0809-90-17DV10 Electrical Specifications Frequency Range 806-896MHz 870-960MHz Polarization ±45º ±45º Gain 16dBi 16.2dBi Horizontal 3dB Beam Width 90º 88º Vertical 3dB Beam Width 8º 7.5º Electrical Down Tilt 0º-10º 0º-10º Front to Back Ratio, 180º±30º ＞ 23dB ＞ 23dB Isolation ＞ 30dB ＞ 30dB Cross-polar Ratio, 0º ±60º ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max, Power Per Input 400W Horizontal Pattern 806-896MHz Horizontal Pattern Vertical Pattern 806-960 +45º 806-960 -45º 7-16 DIN 7-16 DIN Vertical Pattern 870-960MHz Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 18kg Max. Wind Velocity 200km/h Dimension 2580 X 282 X 100mm 29 Low Band Panel Antenna 806-960MHz Vertical Polarization Base Station Antennas 30 . Wind Velocity 200km/h Dimension 2300 X 565 X 100mm . 0º ±30º ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1.0º 8. 3º. 3º.Vpol Panel 806-960 30º 20dBi FET0º.0dBi Horizontal 3dB Beam Width 31º 29º Vertical 3dB Beam Width 9. 180º±30º ＞ 28dB ＞ 28dB Isolation ＞ 30dB ＞ 30dB Cross-polar Ratio. 6º. Fixed First Upper Sidelobe Suppression ＞ 16dB ＞ 16dB Front to Back Ratio. 6º. Fixed 0º. Power Per Input 500W Horizontal Pattern 806-896MHz Vertical Pattern 806-960 7-16 DIN Horizontal Pattern Vertical Pattern 870-960MHz Mechanical Specifications Connector Type 1 X 7-16 DIN(F) Weight 40kg Max.5º Electrical Down Tilt 0º. 6º S-Wave 0809-30-20 S-Wave 0809-30-20T3 S-Wave 0809-30-20T6 Part Number Electrical Specifications Frequency Range 806-896MHz 870-960MHz Polarization Vertical Vertical Gain 19. 3º.4 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max.7dBi 20. 3º. Power Per Input 500W Horizontal Pattern 806-896MHz Vertical Pattern 806-896 7-16 DIN Mechanical Specifications Connector Type 1 X 7-16 DIN(F) Weight 12kg Max.31 Vpol Panel 806-896 65º 15. 3º. Wind Velocity 200km/h Dimension 1300 X 282 X 100mm 32 .4 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max.0dBi FET0º. 6º. 180º±30º ＞ 25dB Isolation ＞ 30dB Cross-polar Ratio. 0º ±60º ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1. 6º S-Wave 08-65-15 S-Wave 08-65-15T3 S-Wave 08-65-15T6 Part Number Electrical Specifications Frequency Range 806-896MHz Polarization Vertical Gain 15dBi Horizontal 3dB Beam Width 65º Vertical 3dB Beam Width 15º Electrical Down Tilt 0º. Fixed First Upper Sidelobe Suppression ＞ 15dB Front to Back Ratio. 180º±30º ＞ 25dB Isolation ＞ 30 dB Cross-polar Ratio.4 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max. Wind Velocity 200km/h Dimension 1950 X 282 X 100mm .0dBi FET0º. 3º. 6º S-Wave 08-65-17 S-Wave 08-65-17T3 S-Wave 08-65-17T6 Part Number Electrical Specifications Frequency Range 806-896MHz Polarization Vertical Gain 16. Power Per Input 500W Horizontal Pattern 806-896MHz Vertical Pattern 806-896 7-16 DIN Mechanical Specifications Connector Type 1 X 7-16 DIN(F) Weight 18kg Max.Vpol Panel 806-896 65º 17. 3º.5dBi Horizontal 3dB Beam Width 65º Vertical 3dB Beam Width 10º Electrical Down Tilt 0º. 6º. Fixed First Upper Sidelobe Suppression ＞ 16dB Front to Back Ratio. 0º ±60º ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1. 5º Electrical Down Tilt 0º. Wind Velocity 200km/h Dimension 2640 X 282 X 100mm 34 .33 Vpol Panel 806-896 65º 18. 180º±30º ＞ 25dB Isolation ＞ 30dB Cross-polar Ratio. Power Per Input 500W Horizontal Pattern 806-896MHz Vertical Pattern 806-896 7-16 DIN Mechanical Specifications Connector Type 1 X 7-16 DIN(F) Weight 22kg Max. 3º.4 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max. 3º.0dBi FET0º. 0º ±60º ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1. 6º.8dBi Horizontal 3dB Beam Width 65º Vertical 3dB Beam Width 7. Fixed First Upper Sidelobe Suppression ＞ 16dB Front to Back Ratio. 6º S-Wave 08-65-18 S-Wave 08-65-18T3 S-Wave 08-65-18T6 Part Number Electrical Specifications Frequency Range 806-896MHz Polarization Vertical Gain 17. 4 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max. 6º.0dBi FET0º. 3º. Power Per Input 500W Horizontal Pattern 870-960MHz Vertical Pattern 870-960 7-16 DIN Mechanical Specifications Connector Type 1 X 7-16 DIN(F) Weight 12kg Max.Vpol Panel 870-960 65º 15. Fixed First Upper Sidelobe Suppression ＞ 15dB Front to Back Ratio. 3º. 0º ±60º ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1. 6º S-Wave 09-65-15 S-Wave 09-65-15T3 S-Wave 09-65-15T6 Part Number Electrical Specifications Frequency Range 870-960MHz Polarization Vertical Gain 15dBi Horizontal 3dB Beam Width 65º Vertical 3dB Beam Width 14º Electrical Down Tilt 0º. 180º±30º ＞ 25dB Isolation ＞ 30dB Cross-polar Ratio. Wind Velocity 200km/h Dimension 1300 X 282 X 100mm . Power Per Input 500W Horizontal Pattern 870-960MHz Vertical Pattern 870-960 7-16 DIN Mechanical Specifications Connector Type 1 X 7-16 DIN(F) Weight 18kg Max. Wind Velocity 200km/h Dimension 1950 X 282 X 100mm 36 . Fixed First Upper Sidelobe Suppression ＞ 16dB Front to Back Ratio. 6º S-Wave 09-65-17 S-Wave 09-65-17T3 S-Wave 09-65-17T6 Part Number Electrical Specifications Frequency Range 870-960MHz Polarization Vertical Gain 17dBi Horizontal 3dB Beam Width 65º Vertical 3dB Beam Width 9.0º Electrical Down Tilt 0º.0dBi FET0º. 3º. 0º ±60º ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1. 180º±30º ＞ 25dB Isolation ＞ 30dB Cross-polar Ratio. 3º.4 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max. 6º.35 Vpol Panel 870-960 65º 17. 180º±30º ＞ 25dB Isolation ＞ 30dB Cross-polar Ratio. 3º.0dBi Horizontal 3dB Beam Width 65º Vertical 3dB Beam Width 7. Power Per Input 500W Horizontal Pattern 870-960MHz Vertical Pattern 870-960 7-16 DIN Mechanical Specifications Connector Type 1 X 7-16 DIN(F) Weight 22kg Max.4 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max. Fixed First Upper Sidelobe Suppression ＞ 16dB Front to Back Ratio. 3º.Vpol Panel 870-960 65º 18. 6º. 0º ±60º ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1. 6º S-Wave 09-65-18 S-Wave 09-65-18T3 S-Wave 09-65-18T6 Part Number Electrical Specifications Frequency Range 870-960MHz Polarization Vertical Gain 18. Wind Velocity 200km/h Dimension 2640 X 282 X 100mm .0º Electrical Down Tilt 0º.0dBi FET0º. 37 High Band Panel Antenna 1710-2170MHz Dual Polarization +45°/–45° Base Station Antennas 38 . 3º 7º 6. 3º. Fixed First Upper Sidelobe Suppression ＞ 16dB ＞ 16dB ＞ 16dB Front to Back Ratio.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max. 180º±30º ＞ 30dB ＞ 30dB ＞ 30dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio. Wind Velocity 200km/h Dimension 1304 X 320 X 72mm . 6º Part Number S-Wave U-33-21D S-Wave U-33-21DT3 S-Wave U-33-21DT6 Electrical Specifications Frequency Range 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º Gain 20dBi 20. 6º.5º Electrical Down Tilt 0º. Power Per Input 250W Horizontal Pattern Vertical Pattern 1710-1880MHz Horizontal Pattern Vertical Pattern 1850-1990MHz 1710-2170 +45º 1710-2170 -45º 7-16 DIN 7-16 DIN Horizontal Pattern Vertical Pattern 1920-2170MHz Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 16kg Max.3dBi 20. 6º. 3º. 0º ±30º ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1. 3º.Xpol Panel 1710-2170 33º 21dBi FET0º. 3º. 6º. Fixed 0º.5dBi Horizontal 3dB Beam Width 36º 35º 33º Vertical 3dB Beam Width 7. Fixed 0º. 5DT3 S-Wave U-65-15. Power Per Input 250W Horizontal Pattern Vertical Pattern 1710-1880MHz Horizontal Pattern Vertical Pattern 1850-1990MHz 1710-2170 +45º 1710-2170 -45º 7-16 DIN 7-16 DIN Horizontal Pattern Vertical Pattern 1920-2170MHz Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 5kg Max. 3º. 0º ±60º ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1. 6º Part Number S-Wave U-65-15. 3º.5D S-Wave U-65-15. 3º. 6º.5DT6 Electrical Specifications Frequency Range 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º Gain 15. 6º. Wind Velocity 200km/h Dimension 735 X 160 X 72mm 40 . Fixed 0º. Fixed First Upper Sidelobe Suppression ＞ 15dB ＞ 15dB ＞ 15dB Front to Back Ratio. 6º.5dBi 15. 180º±30º ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio.7dBi Horizontal 3dB Beam Width 66º 66º 64º Vertical 3dB Beam Width 13º 12º 11º Electrical Down Tilt 0º.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max.5dBi FET0º.39 Xpol Panel 1710-2170 65º 15.2dBi 15. 3º. Fixed 0º. 5dBi 17. 6º. Power Per Input 300W Horizontal Pattern Vertical Pattern 1710-1880MHz Horizontal Pattern Vertical Pattern 1850-1990MHz 1710-2170 +45º 1710-2170 -45º 7-16 DIN 7-16 DIN Horizontal Pattern Vertical Pattern 1920-2170MHz Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 5. Fixed 0º. 3º. 180º±30º ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio. 3º. Fixed 0º. 3º. 0º ±60º ＞ 15dB ＞ 10dB ＞ 15dB ＞ 10dB ＞ 15dB ＞ 10dB Impedance 50Ω VSWR ＜ 1.5dBi Horizontal 3dB Beam Width 65º 65º 65º Vertical 3dB Beam Width 7º 7º 7º Electrical Down Tilt 0º.5dBi 17. 6º. 6º. Fixed First Upper Sidelobe Suppression ＞ 15dB ＞ 15dB ＞ 15dB Front to Back Ratio.4 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max. 3º. 6º Part Number S-Wave U-65-18D S-Wave U-65-18DT3 S-Wave U-65-18DT6 Electrical Specifications Frequency Range 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º Gain 17. Wind Velocity 200km/h Dimension 1337 X 162 X 95mm .5kg Max.Xpol Panel 1710-2170 65º 18dBi FET0º. Wind Velocity 200km/h Dimension 1942 X 160 X 72mm 42 .1º Electrical Down Tilt 0º. 180º±30º ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio.2dBi Horizontal 3dB Beam Width 68º 65º 63º Vertical 3dB Beam Width 4.7dBi 19dBi 19. 6º Part Number S-Wave U-65-19D S-Wave U-65-19DT3 S-Wave U-65-19DT6 Electrical Specifications Frequency Range 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º Gain 18.5º 4. 3º. Fixed First Upper Sidelobe Suppression ＞ 15dB ＞ 15dB ＞ 15dB Front to Back Ratio. 0º ±60º ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max. 3º. 6º. Fixed 0º. Fixed 0º.41 Xpol Panel 1710-2170 65º 19dBi FET0º. 6º.3º 4. 3º. 6º. Power Per Input 250W Horizontal Pattern Vertical Pattern 1710-1880MHz Horizontal Pattern Vertical Pattern 1850-1990MHz 1710-2170 +45º 1710-2170 -45º 7-16 DIN 7-16 DIN Horizontal Pattern Vertical Pattern 1920-2170MHz Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 13kg Max. 3º. Xpol Panel 1710-2170 65º 15dBi VET 0º-15º Adjustable Electrical Down Tilt: manual or optional ACU Part Number S-Wave U-65-15DV15 Electrical Specifications Frequency Range 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º Gain 14.5dBi 14.5º 13º Electrical Down Tilt 0º-15º 0º-15º 0º-15º First Upper Sidelobe Suppression ＞ 15dB ＞ 15dB ＞ 15dB Front to Back Ratio. Power Per Input 250W Horizontal Pattern Vertical Pattern 1710-1880MHz Horizontal Pattern Vertical Pattern 1850-1990MHz 1710-2170 +45º 1710-2170 -45º 7-16 DIN 7-16 DIN Horizontal Pattern Vertical Pattern 1920-2170MHz Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 6kg Max. 0º ±60º ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max. Wind Velocity 200km/h Dimension 662 X 160 X 72mm .8dBi 15dBi Horizontal 3dB Beam Width 68º 66º 64º Vertical 3dB Beam Width 14º 13. 180º±30º ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio. 180º±30º ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio.9dBi Horizontal 3dB Beam Width 68º 66º 64º Vertical 3dB Beam Width 6.7º 6.7dBi 17.1º Electrical Down Tilt 0º-10º 0º-10º 0º-10º First Upper Sidelobe Suppression ＞ 15dB ＞ 15dB ＞ 15dB Front to Back Ratio.4dBi 17.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max. 0º ±60º ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1.43 Xpol Panel 1710-2170 65º 18dBi VET 0º-10º Adjustable Electrical Down Tilt: manual or optional ACU Part Number S-Wave U-65-18DV10 Electrical Specifications Frequency Range 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º Gain 17. Power Per Input 250W Horizontal Pattern Vertical Pattern 1710-1880MHz Horizontal Pattern Vertical Pattern 1850-1990MHz 1710-2170 +45º 1710-2170 -45º 7-16 DIN 7-16 DIN Horizontal Pattern Vertical Pattern 1920-2170MHz Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 8kg Max. Wind Velocity 200km/h Dimension 1302 X 160 X 72mm 44 .5º 6. 3º. 6º. 6º.8º 6.7dBi 16. 6º. Fixed 0º. 0º ±60º ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1. 6º Part Number S-Wave U-90-17D S-Wave U-90-17DT3 S-Wave U-90-17DT6 Electrical Specifications Frequency Range 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º Gain 16.Xpol Panel 1710-2170 90º 17dBi FET0º.5dBi 16. 3º.5º 6. 180º±30º ＞ 23dB ＞ 23dB ＞ 23dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio. Fixed 0º.2º Electrical Down Tilt 0º.9dBi Horizontal 3dB Beam Width 88º 87º 85º Vertical 3dB Beam Width 6. 3º. Power Per Input 250W Horizontal Pattern Vertical Pattern 1710-1880MHz Horizontal Pattern Vertical Pattern 1850-1990MHz 1710-2170 +45º 1710-2170 -45º 7-16 DIN 7-16 DIN Horizontal Pattern Vertical Pattern 1920-2170MHz Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 13kg Max.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max. Wind Velocity 200km/h Dimension 1302 X 160 X 72mm . Fixed First Upper Sidelobe Suppression ＞ 15dB ＞ 15dB ＞ 15dB Front to Back Ratio. 3º. 180º±30º ＞ 23dB ＞ 23dB ＞ 23dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio. Power Per Input 250W Horizontal Pattern Vertical Pattern 1710-1880MHz Horizontal Pattern Vertical Pattern 1850-1990MHz 1710-2170 +45º 1710-2170 -45º 7-16 DIN 7-16 DIN Horizontal Pattern Vertical Pattern 1920-2170MHz Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 7.5dBi 16. Wind Velocity 200km/h Dimension 1574 X 160 X 72mm 46 .5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max.5kg Max.7dBi 16.45 Xpol Panel 1710-2170 90º 17dBi VET 0º-10º Adjustable Electrical Down Tilt: manual or optional ACU Part Number S-Wave U-90-17DV10 Electrical Specifications Frequency Range 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º Gain 16.3º Electrical Down Tilt 0º-10º 0º-10º 0º-10º First Upper Sidelobe Suppression ＞ 15dB ＞ 15dB ＞ 15dB Front to Back Ratio. 0º ±60º ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1.8dBi Horizontal 3dB Beam Width 90º 88º 88º Vertical 3dB Beam Width 7º 6.5º 6. High Band Panel Antenna 1710-2170MHz Vertical Polarization Base Station Antennas . 4 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max. Wind Velocity 200km/h Dimension 1310 X 160 X 72mm 48 . Fixed First Upper Sidelobe Suppression ＞ 16dB Front to Back Ratio. 180º±30º ＞ 25dB Isolation ＞ 30dB Cross-polar Ratio.47 Vpol Panel 1710-1880 65º 18. 6º S-Wave 18-65-18 S-Wave 18-65-18T3 S-Wave 18-65-18T6 Part Number Electrical Specifications Frequency Range 1710-1880MHz Polarization Vertical Gain 17. 6º.0º Electrical Down Tilt 0º.0dBi FET0º. 3º. 0º ±60º ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1.8dBi Horizontal 3dB Beam Width 65º Vertical 3dB Beam Width 7. 3º. Power Per Input 300W Horizontal Pattern 1710-1880MHz Vertical Pattern 1710-1880 7-16 DIN Mechanical Specifications Connector Type 1 X 7-16 DIN(F) Weight 13kg Max. 0º Electrical Down Tilt 0º. Fixed First Upper Sidelobe Suppression ＞ 16dB Front to Back Ratio.0dBi FET0º. 180º±30º ＞ 25dB Isolation ＞ 30dB Cross-polar Ratio.4 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max.Vpol Panel 1920-2170 65º 18. 6º S-Wave 21-65-18 S-Wave 21-65-18T3 S-Wave 21-65-18T6 Part Number Electrical Specifications Frequency Range 1920-2170MHz Polarization Vertical Gain 18. Wind Velocity 200km/h Dimension 1310 X 160 X 72mm . 0º ±60º ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1. 3º.0dBi Horizontal 3dB Beam Width 65º Vertical 3dB Beam Width 6. 6º. 3º. Power Per Input 300W Horizontal Pattern 1920-2170MHz Vertical Pattern 1920-2170 7-16 DIN Mechanical Specifications Connector Type 1 X 7-16 DIN(F) Weight 13kg Max. 3º Electrical Down Tilt 0º. 6º. 180º±30º ＞ 25dB ＞ 25dB ＞ 25dB Impedance 50Ω VSWR ＜ 1.5dBi 17. Fixed 0º. 3º. 3º.7dBi 18dBi Horizontal 3dB Beam Width 68º 65º 63º Vertical 3dB Beam Width 7º 6. Wind Velocity 200km/h Dimension 1302 X 160 X 72mm 50 . Fixed First Upper Sidelobe Suppression ＞ 15dB ＞ 15dB ＞ 15dB Front to Back Ratio. 3º.49 Vpol Panel 1710-2170 65º 18dBi FET0º.6º 6. 6º. Power Per Input 250W Horizontal Pattern Vertical Pattern 1710-1880MHz Horizontal Pattern Vertical Pattern 1850-1990MHz 1710-2170 7-16 DIN Horizontal Pattern Vertical Pattern 1920-2170MHz Mechanical Specifications Connector Type 1 X 7-16 DIN(F) Weight 13kg Max. 6º. 6º Part Number S-Wave U-65-18 S-Wave U-65-18T3 S-Wave U-65-18T6 Electrical Specifications Frequency Range 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization Vertical Vertical Vertical Gain 17.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max. Fixed 0º. 3º. Dual Band Antennas 2 PORTS (with BUILT-IN Combiner) Dual Polarization +45°/–45° Base Station Antennas . 9º 6.3dBi 14. Wind Velocity 200km/h Dimension 1550 X 295 X 145mm 52 .6dBi 17.9dBi 16.51 XXpol Panel C 790-960/1710-2170 65º 15/17dBi FET0º/0º Part Number S-Wave 0709/U-65-15/17DC-F Electrical Specifications 790-960 MHz Frequency Range 1710-2170MHz 790-896MHz 880-960MHz 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º ±45º ±45º Gain 14.5º 5.9º Electrical Down Tilt 0º 0º 0º 0º 0º First Upper Sidelobe Suppression ＞ 16dB ＞ 16dB ＞ 16dB ＞ 16dB ＞ 16dB Front to Back Ratio (180°±30°) ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio.3 dBi 16. 0º ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Impedance 50Ω 50Ω VSWR ＜ 1.7º 6.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc ＜ -150dBc Max.0dBi Horizontal 3dB Beam Width 67º 64º 66º 64º 60º Vertical 3dB Beam Width 14. Power 400W 200W 450W 450W Max.5 ＜ 1.7º 13. Power Per Input Built-in Combiner Horizontal Pattern The insertion loss is included in the given antenna values. 790-960MHz Vertical Pattern 790-960 +45º Horizontal Pattern 1710-2170MHz 1710-2170 +45º 790-960 -45º 1710-2170 -45º C C 7-16 DIN 7-16 DIN Vertical Pattern Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 16kg Max. 5 ＜ 1.XXpol Panel C 790-960/1710-2170 65º 15/17dBi FET6º Part Number S-Wave 0709/U-65-15/17DT6C-F Electrical Specifications 790-960 MHz Frequency Range 1710-2170MHz 790-896MHz 880-960MHz 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º ±45º ±45º Gain 14.9º 6. Power Per Input Built-in Combiner Horizontal Pattern The insertion loss is included in the given antenna values.3 dBi 16. 0º ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Impedance 50Ω 50Ω VSWR ＜ 1.5º 5.3dBi 14. Wind Velocity 200km/h Dimension 1550 X 295 X 145mm .7º 13.9dBi 16.9º Electrical Down Tilt 6º 6º 6º 6º 6º First Upper Sidelobe Suppression ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Front to Back Ratio (180°±30°) ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio. Power 400W 200W 450W 450W Max.6dBi 16.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc ＜ -150dBc Max. 790-960MHz Vertical Pattern 790-960 +45º Horizontal Pattern 1710-2170MHz 1710-2170 +45º 790-960 -45º 1710-2170 -45º C C 7-16 DIN 7-16 DIN Vertical Pattern Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 16kg Max.7º 6.8dBi Horizontal 3dB Beam Width 68º 65º 66º 64º 62º Vertical 3dB Beam Width 14. Power Per Input Built-in Combiner Horizontal Pattern The insertion loss is included in the given antenna values. 790-960MHz Vertical Pattern 790-960 +45º Horizontal Pattern 1710-2170MHz Vertical Pattern 1710-2170 +45º 790-960 -45º 1710-2170 -45º C C 7-16 DIN 7-16 DIN Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 16kg Max. 5º... 15º 16.7º 13.5º 5. 10º 16. Power 400W 200W 450W 450W Max..15.. 8º.14dB Front to Back Ratio (180°±30°) ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio..7º 6..... 5º..5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc ＜ -150dBc Max..3 dBi 16..6dBi 17.15..... 15º 16... Wind Velocity 200km/h Dimension 1550 X 295 X 145mm 54 ...9º Electrical Down Tilt 0-15º 0-15º 0-10º 0-10º 0-10º First Upper Sidelobe Suppression 0º...53 XXpol Panel C 790-960/1710-2170 65º 15/17dBi VET0-15º/0-10º Adjustable Electrical Down Tilt: manual or optional ACU Part Number S-Wave 0709/U-65-15/17DV15/10C-F Electrical Specifications 790-960 MHz Frequency Range 1710-2170MHz 790-896MHz 880-960MHz 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º ±45º ±45º Gain 14.....5 ＜ 1. 10º 16..15.3dBi 14...... 10º 16..14dB 0º.. 5º..15. 8º.0dBi Horizontal 3dB Beam Width 67º 64º 66º 64º 60º Vertical 3dB Beam Width 14..14dB 0º..14dB 0º..9dBi 16.15. 0º ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Impedance 50Ω 50Ω VSWR ＜ 1..9º 6..14dB 0º. XXpol Panel C 790-960/1710-2170 65º 16/18dBi FET0º/0º Part Number S-Wave 0709/U-65-16/18DC-F Electrical Specifications 790-960 MHz Frequency Range 1710-2170MHz 790-896MHz 880-960MHz 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º ±45º ±45º Gain 15.3dBi 16.0dBi 16. Power 400W 200W 450W 450W Max.5º Electrical Down Tilt 0º 0º 0º 0º 0º First Upper Sidelobe Suppression ＞ 16dB ＞ 16dB ＞ 16dB ＞ 16dB ＞ 16dB Front to Back Ratio (180°±30°) ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio. Power Per Input Built-in Combiner Horizontal Pattern The insertion loss is included in the given antenna values.0dBi Horizontal 3dB Beam Width 67º 64º 66º 64º 60º Vertical 3dB Beam Width 10. 0º ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Impedance 50Ω 50Ω VSWR ＜ 1. Wind Velocity 200km/h Dimension 1990 X 295 X 145mm .5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc ＜ -150dBc Max.5º 5.5 ＜ 1.4dBi 18.8 dBi 17.2º 5º 4. 790-960MHz Vertical Pattern 790-960 +45º Horizontal Pattern 1710-2170MHz Vertical Pattern 1710-2170 +45º 790-960 -45º 1710-2170 -45º C C 7-16 DIN 7-16 DIN Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 21kg Max.6º 9. 8 dBi 17. Wind Velocity 200km/h Dimension 1990 X 295 X 145mm 56 . Power 400W 200W 450W 450W Max.0dBi Horizontal 3dB Beam Width 67º 64º 66º 64º 60º Vertical 3dB Beam Width 10.55 XXpol Panel C 790-960/1710-2170 65º 16/18dBi FET6º/6º Part Number S-Wave 0709/U-65-16/18DT6C-F Electrical Specifications 790-960 MHz Frequency Range 1710-2170MHz 790-896MHz 880-960MHz 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º ±45º ±45º Gain 15.5º Electrical Down Tilt 6º 6º 6º 6º 6º First Upper Sidelobe Suppression ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Front to Back Ratio (180°±30°) ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio.2º 5º 4.5º 5.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc ＜ -150dBc Max.4dBi 18.0dBi 16.3dBi 16. 790-960MHz Vertical Pattern 790-960 +45º Horizontal Pattern 1710-2170MHz Vertical Pattern 1710-2170 +45º 790-960 -45º 1710-2170 -45º C C 7-16 DIN 7-16 DIN Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 21kg Max.5 ＜ 1.6º 9. Power Per Input Built-in Combiner Horizontal Pattern The insertion loss is included in the given antenna values. 0º ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Impedance 50Ω 50Ω VSWR ＜ 1. . Power 400W 200W 450W 450W Max. Power Per Input Built-in Combiner Horizontal Pattern The insertion loss is included in the given antenna values.14dB 0º.15.. 0º ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Impedance 50Ω 50Ω VSWR ＜ 1.5 ＜ 1.8 dBi 17.. 8º 16.... 5º..8º 4. 790-960MHz Vertical Pattern 790-960 +45º Horizontal Pattern 1710-2170MHz Vertical Pattern 1710-2170 +45º 790-960 -45º 1710-2170 -45º C C 7-16 DIN 7-16 DIN Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 21kg Max.6º 9.5º 5......0dBi Horizontal 3dB Beam Width 67º 64º 66º 64º 60º Vertical 3dB Beam Width 10.15.14dB Front to Back Ratio (180°±30°) ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio. 4º... 5º. 4º..4dBi 18.15.14dB 0º.15.14dB 0º.. 10º 16...1º 4...3º Electrical Down Tilt 0-10º 0-10º 0-8º 0-8º 0-8º First Upper Sidelobe Suppression 0º....4dBi 16.... 8º 16... Wind Velocity 200km/h Dimension 1990 X 295 X 145mm ...15.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc ＜ -150dBc Max..0dBi 16.XXpol Panel C 790-960/1710-2170 65º 16/18dBi VET0-10º/0-8º Adjustable Electrical Down Tilt: manual or optional ACU Part Number S-Wave 0709/U-65-16/18DV10/V8C-F Electrical Specifications 790-960 MHz Frequency Range 1710-2170MHz 790-896MHz 880-960MHz 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º ±45º ±45º Gain 15..... 10º 16. 4º...14dB 0º. 8º 16.... Power Per Input Built-in Combiner Horizontal Pattern The insertion loss is included in the given antenna values.1º 4.57 XXpol Panel C 790-960/1710-2170 65º 17/18dBi FET0º/0º Part Number S-Wave 0709/U-65-17/18DC-F Electrical Specifications 790-960 MHz Frequency Range 1710-2170MHz 790-896MHz 880-960MHz 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º ±45º ±45º Gain 16.3º Electrical Down Tilt 0º 0º 0º 0º 0º First Upper Sidelobe Suppression ＞ 16dB ＞ 16dB ＞ 16dB ＞ 16dB ＞ 16dB Front to Back Ratio (180°±30°) ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio.5dBi 17.0 dBi 17.8º 4.4º 5. 0º ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Impedance 50Ω 50Ω VSWR ＜ 1.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc ＜ -150dBc Max. Wind Velocity 200km/h Dimension 2590 X 295 X 145mm 58 .2dBi 18. 790-960MHz Vertical Pattern 790-960 +45º Horizontal Pattern 1710-2170MHz Vertical Pattern 1710-2170 +45º 790-960 -45º 1710-2170 -45º C C 7-16 DIN 7-16 DIN Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 27kg Max.0dBi Horizontal 3dB Beam Width 68º 65º 66º 64º 60º Vertical 3dB Beam Width 8º 7.5 ＜ 1.1dBi 17. Power 400W 200W 450W 450W Max. 1º 4. 790-960MHz Vertical Pattern 790-960 +45º Horizontal Pattern 1710-2170MHz Vertical Pattern 1710-2170 +45º 790-960 -45º 1710-2170 -45º C C 7-16 DIN 7-16 DIN Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 27kg Max.0dBi Horizontal 3dB Beam Width 68º 65º 66º 64º 60º Vertical 3dB Beam Width 8º 7.1dBi 17. 0º ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Impedance 50Ω 50Ω VSWR ＜ 1. Power 400W 200W 450W 450W Max.8º 4.4º 5.XXpol Panel C 790-960/1710-2170 65º 17/18dBi FET6º/6º Part Number S-Wave 0709/U-65-17/18DT6C-F Electrical Specifications 790-960 MHz Frequency Range 1710-2170MHz 790-896MHz 880-960MHz 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º ±45º ±45º Gain 16. Power Per Input Built-in Combiner Horizontal Pattern The insertion loss is included in the given antenna values.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc ＜ -150dBc Max.5 ＜ 1. Wind Velocity 200km/h Dimension 2590 X 295 X 145mm .5dBi 17.2dBi 18.0dBi 17.3º Electrical Down Tilt 6º 6º 6º 6º 6º First Upper Sidelobe Suppression ＞ 14dB ＞ 14dB ＞ 14dB ＞ 14dB ＞ 14dB Front to Back Ratio (180°±30°) ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio. ..14dB 0º.8º 4.. Power Per Input Built-in Combiner Horizontal Pattern The insertion loss is included in the given antenna values. 8º 16.........5 ＜ 1. 4º..3º Electrical Down Tilt 0-8º 0-8º 0-8º 0-8º 0-8º First Upper Sidelobe Suppression 0º.... 790-960MHz Vertical Pattern 790-960 +45º Horizontal Pattern 1710-2170MHz Vertical Pattern 1710-2170 +45º 790-960 -45º 1710-2170 -45º C C 7-16 DIN 7-16 DIN Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 27kg Max. 4º.14dB 0º. 4º.15.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc ＜ -150dBc Max..... 8º 16...4º 5. 8º 16. Power 400W 200W 450W 450W Max. 0º ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Impedance 50Ω 50Ω VSWR ＜ 1..1dBi 17.2dBi 18...1º 4.15..15.. 8º 16.5dBi 17.59 XXpol Panel C 790-960/1710-2170 65º 17/18dBi VET0º-8º Adjustable Electrical Down Tilt: manual or optional ACU Part Number S-Wave 0709/U-65-17/18DV8C-F Electrical Specifications 790-960 MHz Frequency Range 1710-2170MHz 790-896MHz 880-960MHz 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º ±45º ±45º Gain 16. 4º..... 4º..14dB 0º.15.0dBi Horizontal 3dB Beam Width 68º 65º 66º 64º 60º Vertical 3dB Beam Width 8º 7..14dB Front to Back Ratio (180°±30°) ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio.14dB 0º. Wind Velocity 200km/h Dimension 2590 X 295 X 145mm 60 .0 dBi 17..15. 8º 16........ Dual Band Antennas 4 Ports Dual Polarization +45°/–45° Base Station Antennas . Wind Velocity 200km/h Dimension 1550 X 295 X 145mm 62 .7º 6.1dBi Horizontal 3dB Beam Width 67º 64º 66º 64º 60º Vertical 3dB Beam Width 14.5dBi 16.5 ＜ 1.5º 5.1dBi 16. Power 400W 200W Horizontal Pattern Horizontal Pattern 790-960MHz 1710-2170MHz Vertical Pattern 790-960 +45º 790-960 -45º 1710-2170 +45º 1710-2170 -45º 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN Vertical Pattern Mechanical Specifications Connector Type 4 X 7-16 DIN(F) Weight 16kg Max.7º 13.61 XXpol Panel 790-960/1710-2170 65º 15/17dBi FET0º/0º Part Number S-Wave 0709/U-65-15/17D-F Electrical Specifications 790-960 MHz Frequency Range Polarization 1710-2170MHz 790-896MHz 880-960MHz 1710-1880MHz 1850-1990MHz 1920-2170MHz ±45º ±45º ±45º ±45º ±45º Gain 14.5dBi 15.9º 6.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc ＜ -150dBc Max. 0º ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Impedance 50Ω 50Ω VSWR ＜ 1.9º Electrical Down Tilt 0º 0º 0º 0º 0º First Upper Sidelobe Suppression ＞ 16dB ＞ 16dB ＞ 16dB ＞ 16dB ＞ 16dB Front to Back Ratio (180°±30°) ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio.8dBi 17. 5dBi 15.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc ＜ -150dBc Max.8dBi 17.7º 13.9º 6.XXpol Panel 790-960/1710-2170 65º 15/17dBi FET6º Part Number S-Wave 0709/U-65-15/17DT6-F Electrical Specifications 790-960 MHz Frequency Range Polarization 1710-2170MHz 790-896MHz 880-960MHz 1710-1880MHz 1850-1990MHz 1920-2170MHz ±45º ±45º ±45º ±45º ±45º Gain 14.1dBi Horizontal 3dB Beam Width 68º 65º 66º 64º 62º Vertical 3dB Beam Width 14. Wind Velocity 200km/h Dimension 1550 X 295 X 145mm .5º 5.9º Electrical Down Tilt 6º 6º 6º 6º 6º First Upper Sidelobe Suppression ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Front to Back Ratio (180°±30°) ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio.5dBi 16. Power 400W 200W Horizontal Pattern Horizontal Pattern 790-960MHz 1710-2170MHz Vertical Pattern 790-960 +45º 790-960 -45º 1710-2170 +45º 1710-2170 -45º 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN Vertical Pattern Mechanical Specifications Connector Type 4 X 7-16 DIN(F) Weight 16kg Max.1dBi 16.5 ＜ 1. 0º ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Impedance 50Ω 50Ω VSWR ＜ 1.7º 6. .9º Electrical Down Tilt 0-15º 0-15º 0-10º 0-10º 0-10º First Upper Sidelobe Suppression 0º. 15º 16. 10º 16. 10º 16..14dB 0º. 10º 16.14dB 0º......8dBi 17...15.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc ＜ -150dBc Max..15.... 5º........5dBi 15..63 XXpol Panel 790-960/1710-2170 65º 15/17dBi VET0-15º/0-10º Adjustable Electrical Down Tilt: manual or optional ACU Part Number S-Wave 0709/U-65-15/17DV15/10-F Electrical Specifications 790-960 MHz Frequency Range 1710-2170MHz 790-896MHz 880-960MHz 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º ±45º ±45º Gain 14. 0º ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Impedance 50Ω 50Ω VSWR ＜ 1. Wind Velocity 200km/h Dimension 1550 X 295 X 145mm 64 ..14dB 0º. 15º 16.7º 13.1dBi 16.. Power 400W 200W Horizontal Pattern Horizontal Pattern 790-960MHz 1710-2170MHz Vertical Pattern 790-960 +45º 790-960 -45º 1710-2170 +45º 1710-2170 -45º 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN Vertical Pattern Mechanical Specifications Connector Type 4 X 7-16 DIN(F) Weight 16kg Max...5 ＜ 1..... 5º.7º 6..15.5dBi 16.14dB Front to Back Ratio (180°±30°) ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio.14dB 0º.1dBi Horizontal 3dB Beam Width 67º 64º 66º 64º 60º Vertical 3dB Beam Width 14.15.15... 8º..9º 6....... 5º.5º 5. 8º.. XXpol Panel 790-960/1710-2170 65º 16/18dBi FET0º/0º Part Number S-Wave 0709/U-65-16/18D-F Electrical Specifications 790-960 MHz Frequency Range Polarization 1710-2170MHz 790-896MHz 880-960MHz 1710-1880MHz 1850-1990MHz 1920-2170MHz ±45º ±45º ±45º ±45º ±45º Gain 15.6dBi 18.5 ＜ 1. Power 400W 200W Horizontal Pattern Horizontal Pattern 790-960MHz 1710-2170MHz Vertical Pattern 790-960 +45º 790-960 -45º 1710-2170 +45º 1710-2170 -45º 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN Vertical Pattern Mechanical Specifications Connector Type 4 X 7-16 DIN(F) Weight 21kg Max.5º 5.5dBi 16. 0º ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Impedance 50Ω 50Ω VSWR ＜ 1. Wind Velocity 200km/h Dimension 1990 X 295 X 145mm .2dBi 17.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc ＜ -150dBc Max.6º 9.2º 5º 4.5º Electrical Down Tilt 0º 0º 0º 0º 0º First Upper Sidelobe Suppression ＞ 16dB ＞ 16dB ＞ 16dB ＞ 16dB ＞ 16dB Front to Back Ratio (180°±30°) ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio.2dBi Horizontal 3dB Beam Width 67º 64º 66º 64º 60º Vertical 3dB Beam Width 10.0dBi 17. 5º Electrical Down Tilt 6º 6º 6º 6º 6º First Upper Sidelobe Suppression ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Front to Back Ratio (180°±30°) ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio.65 XXpol Panel 790-960/1710-2170 65º 16/18dBi FET6º/6º Part Number S-Wave 0709/U-65-16/18DT6-F Electrical Specifications 790-960 MHz Frequency Range Polarization 1710-2170MHz 790-896MHz 880-960MHz 1710-1880MHz 1850-1990MHz 1920-2170MHz ±45º ±45º ±45º ±45º ±45º Gain 15.1dBi 16.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc ＜ -150dBc Max. Power 400W 200W Horizontal Pattern Horizontal Pattern 790-960MHz 1710-2170MHz Vertical Pattern 790-960 +45º 790-960 -45º 1710-2170 +45º 1710-2170 -45º 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN Vertical Pattern Mechanical Specifications Connector Type 4 X 7-16 DIN(F) Weight 21kg Max.2º 5º 4.1dBi Horizontal 3dB Beam Width 67º 64º 66º 64º 60º Vertical 3dB Beam Width 10. 0º ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Impedance 50Ω 50Ω VSWR ＜ 1.6º 9.9 dBi 17.5º 5.5dBi 18.5 ＜ 1.4dBi 16. Wind Velocity 200km/h Dimension 1990 X 295 X 145mm 66 . .. 5º.14dB Front to Back Ratio (180°±30°) ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio... Wind Velocity 200km/h Dimension 1990 X 295 X 145mm .XXpol Panel 790-960/1710-2170 65º 16/18dBi VET0-10º/0-8º Adjustable Electrical Down Tilt: manual or optional ACU Part Number S-Wave 0709/U-65-16/18DV10/V8-F Electrical Specifications 790-960 MHz Frequency Range 1710-2170MHz 790-896MHz 880-960MHz 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º ±45º ±45º Gain 15.6dBi 18.....0dBi 17...5 ＜ 1...14dB 0º.. 4º...... 10º 16.2dBi 17..15..15.14dB 0º. 4º. 8º 16... 8º 16....1º 4..... 5º..3º Electrical Down Tilt 0-10º 0-10º 0-8º 0-8º 0-8º First Upper Sidelobe Suppression 0º.15.5dBi 16..5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc ＜ -150dBc Max... 0º ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Impedance 50Ω 50Ω VSWR ＜ 1.6º 9.15.5º 5. 10º 16. 8º 16.14dB 0º... Power 400W 200W Horizontal Pattern Horizontal Pattern 790-960MHz 1710-2170MHz Vertical Pattern 790-960 +45º 790-960 -45º 1710-2170 +45º 1710-2170 -45º 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN Vertical Pattern Mechanical Specifications Connector Type 4 X 7-16 DIN(F) Weight 21kg Max. 4º....2dBi Horizontal 3dB Beam Width 67º 64º 66º 64º 60º Vertical 3dB Beam Width 10.14dB 0º...15.8º 4. 67 XXpol Panel 790-960/1710-2170 65º 17/18dBi FET0º/0º Part Number S-Wave 0709/U-65-17/18D-F Electrical Specifications 790-960 MHz Frequency Range Polarization 1710-2170MHz 790-896MHz 880-960MHz 1710-1880MHz 1850-1990MHz 1920-2170MHz ±45º ±45º ±45º ±45º ±45º Gain 16.1º 4. Power 400W 200W Horizontal Pattern Horizontal Pattern 790-960MHz 1710-2170MHz Vertical Pattern 790-960 +45º 790-960 -45º 1710-2170 +45º 1710-2170 -45º 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN Vertical Pattern Mechanical Specifications Connector Type 4 X 7-16 DIN(F) Weight 27kg Max.4º 5.3º Electrical Down Tilt 0º 0º 0º 0º 0º First Upper Sidelobe Suppression ＞ 16dB ＞ 16dB ＞ 16dB ＞ 16dB ＞ 16dB Front to Back Ratio (180°±30°) ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio.2dBi Horizontal 3dB Beam Width 68º 65º 66º 64º 60º Vertical 3dB Beam Width 8º 7.3dBi 17.6dBi 18. Wind Velocity 200km/h Dimension 2590 X 295 X 145mm 68 .5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc ＜ -150dBc Max.8º 4.0dBi 17. 0º ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Impedance 50Ω 50Ω VSWR ＜ 1.6dBi 17.5 ＜ 1. Wind Velocity 200km/h Dimension 2590 X 295 X 145mm .5 ＜ 1.4º 5.8º 4.6dBi 17.1dBi Horizontal 3dB Beam Width 68º 65º 66º 64º 60º Vertical 3dB Beam Width 8º 7.XXpol Panel 790-960/1710-2170 65º 17/18dBi FET6º/6º Part Number S-Wave 0709/U-65-17/18DT6-F Electrical Specifications 790-960 MHz Frequency Range Polarization 1710-2170MHz 790-896MHz 880-960MHz 1710-1880MHz 1850-1990MHz 1920-2170MHz ±45º ±45º ±45º ±45º ±45º Gain 16.0dBi 17.3º Electrical Down Tilt 6º 6º 6º 6º 6º First Upper Sidelobe Suppression ＞ 14dB ＞ 14dB ＞ 14dB ＞ 14dB ＞ 14dB Front to Back Ratio (180°±30°) ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio. 0º ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Impedance 50Ω 50Ω VSWR ＜ 1.4dBi 18.2dBi 17.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc ＜ -150dBc Max.1º 4. Power 400W 200W Horizontal Pattern Horizontal Pattern 790-960MHz 1710-2170MHz Vertical Pattern 790-960 +45º 790-960 -45º 1710-2170 +45º 1710-2170 -45º 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN Vertical Pattern Mechanical Specifications Connector Type 4 X 7-16 DIN(F) Weight 27kg Max. ..0dBi 17....14dB 0º...15. 4º.15. Wind Velocity 200km/h Dimension 2590 X 295 X 145mm 70 . 8º 16....... 4º... 8º 16..3º Electrical Down Tilt 0-8º 0-8º 0-8º 0-8º 0-8º First Upper Sidelobe Suppression 0º...2dBi Horizontal 3dB Beam Width 68º 65º 66º 64º 60º Vertical 3dB Beam Width 8º 7.. 8º 16.14dB 0º. 4º.1º 4...15.4º 5.....14dB 0º. Power 400W 200W Horizontal Pattern Horizontal Pattern 790-960MHz 1710-2170MHz Vertical Pattern 790-960 +45º 790-960 -45º 1710-2170 +45º 1710-2170 -45º 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN Vertical Pattern Mechanical Specifications Connector Type 4 X 7-16 DIN(F) Weight 27kg Max..69 XXpol Panel 790-960/1710-2170 65º 17/18dBi VET0º-8º Adjustable Electrical Down Tilt: manual or optional ACU Part Number S-Wave 0709/U-65-17/18DV8-F Electrical Specifications 790-960 MHz Frequency Range 1710-2170MHz 790-896MHz 880-960MHz 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º ±45º ±45º Gain 16.8º 4...6dBi 18... 4º..3dBi 17.5 ＜ 1.15.6dBi 17...... 8º 16. 8º 16. 4º. 0º ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Impedance 50Ω 50Ω VSWR ＜ 1.14dB 0º.14dB Front to Back Ratio (180°±30°) ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio.15..5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc ＜ -150dBc Max.... Triple Band Antennas 6 Ports Dual Polarization +45°/–45° Base Station Antennas . ...14dB 0º.1dBi 4X13...9 dBi 4X14. Power 400W 200W Horizontal Pattern 790-960MHz Vertical Pattern Horizontal Pattern Vertical Pattern 1710-1880MHz 790-960 +45º 790-960 -45º 1710-2170 +45º 1710-2170 +45º 1710-2170 -45º 1710-2170 -45º 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN Horizontal Pattern Vertical Pattern 1920-2170MHz Mechanical Specifications Connector Type 6 X 7-16 DIN(F) Weight 21kG Max.14dB 0º.......4º 13.71 XXXpol Panel 790-960/1710-2170/1710-2170 65º 15...5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc ＜ -150dBc Max.7º 13.. 15º 16. 7º.14dB 0º. 15º 16....0dBi VET0º-15º Adjustable Electrical Down Tilt: manual or optional ACU Part Number S-Wave 0709/U/U-65-15DV15-F Electrical Specifications 790-960 MHz Frequency Range 1710-2170MHz 790-896MHz 880-960MHz 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º ±45º ±45º Gain 2X14.5 ＜ 1. 15º 16....15. 7º.9º 13.. 7º..6º Electrical Down Tilt 0-15º 0-15º 0-15º 0-15º 0-15º First Upper Sidelobe Suppression 0º... 15º 16. Wind Velocity 200km/h Dimension 1690 X 295 X 145mm 72 .0º 12.5dBi 2X15.2dBi 4X14. 7º....15..14dB Front to Back Ratio (180°±30°) ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio.15. 15º 16..15..14dB 0º...... 7º.7dBi Horizontal 3dB Beam Width 67º 64º 66º 64º 60º Vertical 3dB Beam Width 14.... 0º ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Impedance 50Ω 50Ω VSWR ＜ 1..15.. 8º 16.. 8º 16.14dB 0º. 12º 16.. 6º..6º Electrical Down Tilt 0-8º 0-8º 0-12º 0-12º 0-12º First Upper Sidelobe Suppression 0º.5dBi 2X16. 12º 16..0dBi VET0°-8°/0°-12°/0°-12° Adjustable Electrical Down Tilt: manual or optional ACU Part Number S-Wave 0709/U/U-65-16DV8/V12/V12-F Electrical Specifications 790-960 MHz Frequency Range 1710-2170MHz 790-896MHz 880-960MHz 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º ±45º ±45º Gain 2X15..6º 9..... 0º ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Impedance 50Ω 50Ω VSWR ＜ 1.3dBi Horizontal 3dB Beam Width 67º 64º 66º 64º 60º Vertical 3dB Beam Width 10.15.. 12º 16. 6º.7dBi 4X16... 4º.15...... 4º...XXXpol Panel 790-960/1710-2170/1710-2170 65º 16.......15..15..14dB 0º..14dB 0º..0º 8...3º 9..5 ＜ 1...2dBi 4X15.14dB 0º..... Wind Velocity 200km/h Dimension 2130 X 295 X 145mm ..2dBi 4X15.15.5º 9.. 6º.14dB Front to Back Ratio (180°±30°) ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc ＜ -150dBc Max. Power 400W 200W Horizontal Pattern 790-960MHz Vertical Pattern Horizontal Pattern Vertical Pattern 1710-1880MHz 790-960 +45º 790-960 -45º 1710-2170 +45º 1710-2170 +45º 1710-2170 -45º 1710-2170 -45º 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN Horizontal Pattern Vertical Pattern 1920-2170MHz Mechanical Specifications Connector Type 6 X 7-16 DIN(F) Weight 26kG Max. 14dB 0º.4dBi 2X16... 5º.. 0º ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB ＞ 15dB Impedance 50Ω 50Ω VSWR ＜ 1.0dBi VET0°-8°/0°-10°/0°-10° Adjustable Electrical Down Tilt: manual or optional ACU Part Number S-Wave 0709/U/U-65-17DV8/V10/V10-F Electrical Specifications 790-960 MHz Frequency Range 1710-2170MHz 790-896MHz 880-960MHz 1710-1880MHz 1850-1990MHz 1920-2170MHz Polarization ±45º ±45º ±45º ±45º ±45º Gain 2X16..14dB 0º..73 XXXpol Panel 790-960/1710-2170/1710-2170 65º 17. 5º.15.15..5dBi 2X16........ 4º.. 4º.7º 4.14dB 0º..... 10º 16.4º 5.1dBi 2X16..1dBi Horizontal 3dB Beam Width 67º 64º 66º 64º 60º Vertical 3dB Beam Width 8º 7. 10º 16.1º 4.. Power 400W 200W Horizontal Pattern 790-960MHz Vertical Pattern Horizontal Pattern Vertical Pattern 1710-1880MHz 790-960 +45º 790-960 -45º 1710-2170 +45º 1710-2170 +45º 1710-2170 -45º 1710-2170 -45º 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN Horizontal Pattern Vertical Pattern 1920-2170MHz Mechanical Specifications Connector Type 6 X 7-16 DIN(F) Weight 34kG Max.4dBi 2X16...15.. 5º...15. Wind Velocity 200km/h Dimension 2870 X 295 X 145mm 74 .5 ＜ 1...14dB Front to Back Ratio (180°±30°) ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio. 8º 16...15....14dB 0º...3º Electrical Down Tilt 0-8º 0-8º 0-10º 0-10º 0-10º First Upper Sidelobe Suppression 0º.7dBi 2X16.. 10º 16..7dBi 2X17..8dBi 2X17.... 8º 16.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc ＜ -150dBc Max. Multi-Band Antennas Dual Polarization +45°/–45° Base Station Antennas . ..5:1 Gain 2 x 16.5dBi 2 x 17dBi 4 x 17...5° 7. Between ports 26dB Isolation.6° 15dB 15dB 15dB 10dB 10dB 7dB 0° .8dBi ≤1. 10° 16 . 15 . 5° .75 Panel Antenna... 14 dB First Sidelobe Suppression Electrical Down Tilt 0-10º Cross-polar Discrimination 0° 15dB 15dB ±60° 10dB 10dB Front-to-back Ratio (180°±30°) 25dB Intermodulation (3rd order) -150dBc @ 2 x 20 W Isolation. Inter band 30dB Impedance 50 Ω Power Handling Horizontal Pattern 500 W 790-960MHz 500 W 250 W 250 W 250 W Vertical Pattern 790-960 -45º 790-960 +45º 1710-2690 -45º 1710-2690 -45º 1710-2690 +45º 1710-2690 +45º 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN Horizontal Pattern Vertical Pattern 1710-2690 MHz Mechanical Specifications Connector Type 6 X 7-16 DIN(F) Weight 35kg Max. Wind Velocity 200km/h Dimension 2670 X 350 X 145mm 76 ..5 dBi Polarization ±45º ±45º ±45º ±45º ±45º Horizontal Half Power Beamwidth 69° 66° 65° 60° 57° Vertical Half Power Beamwidth 8° 7..2° 6.2° 5. Adjustable Electrical Down Tilt Part Number S-Wave 0709/EW/EW-65-17/18/18DV10-F Electrical Specifications Frequency Range 790-896MHz 880–960MHz VSWR 1710–1920MHz 1920–2170MHz 2170–2690MHz 4 x 18dBi 4 x 17. Inter band 30dB Impedance 50 Ω Power Handling Horizontal Pattern 500 W 790-960MHz 500 W 250 W 250 W 250 W Vertical Pattern 1710-2690 -45º 790-960 +45º 1710-2690 -45º 1710-2690 +45º 1710-2690 -45º 1710-2690 +45º 1710-2690 +45º 1710-2690 -45º 1710-2690 +45º 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN Horizontal Pattern Vertical Pattern 1710-2690 MHz 790-960 -45º 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN Mechanical Specifications Connector Type 10 x 7/16 Female Weight 48kg Max..5:1 Gain 2 x 16. 10° 16 ...2° 5. Wind Velocity 200km/h Dimension 2670 X 350 X 145mm .5° 7..Panel Antenna. 15 ..6° 15dB 15dB 15dB 10dB 10dB 7dB 0° .8dBi ≤1.. 5° .5 dBi Polarization ±45º ±45º ±45º ±45º ±45º Horizontal Half Power Beamwidth 69° 66° 65° 60° 57° Vertical Half Power Beamwidth 8° 7.. 14 dB First Sidelobe Suppression Electrical Down Tilt 0-10º Cross-polar Discrimination 0° 15dB 15dB ±60° 10dB 10dB Front-to-back Ratio (180°±30°) 25dB Intermodulation (3rd order) -150dBc @ 2 x 20 W Isolation. Between ports 26dB Isolation.5dBi 2 x 17dBi 8 x 17.2° 6. Adjustable Electrical Down Tilt Part Number S-Wave 0709/EW/EW/EW/EW-65-17/18/18/18/18DV10-F Electrical Specifications Frequency Range 790-896MHz 880–960MHz VSWR 1710–1920MHz 1920–2170MHz 2170–2690MHz 8 x 18dBi 8 x 17.. 77 Tri-Sector ANTENNAS Dual Polarization +45°/–45° Base Station Antennas 78 . 5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max.8dBi Horizontal 3dB Beam Width 65º 65º 65º Vertical 3dB Beam Width 7.8dBi 17.0º Electrical Down Tilt 0-8º 0-8º 0-8º First Upper Sidelobe Suppression 16dB 16dB 16dB Front to Back Ratio (180°±30°) ＞ 25dB ＞ 25dB ＞ 25dB Isolation ＞ 30dB ＞ 30dB ＞ 30dB Cross-polar Ratio.0dBi VET0º-8º Adjustable Electrical Down Tilt: manual or optional ACU Part Number S-Wave U-65-18DV8S Electrical Specifications Frequency Range 1710-2170MHz 1710-2170MHz 1710-2170MHz Polarization ±45º ±45º ±45º Gain 17. Wind Velocity 200km/h Dimension Φ250 X 2230mm .0º 7. 0º ±60º ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB ＞ 18dB ＞ 10dB Impedance 50Ω VSWR ＜ 1.0º 7. Power 250W Horizontal Pattern Vertical Pattern 1710-2170MHz Horizontal Pattern Vertical Pattern 1710-2170MHz 1710-2170 +45º 1710-2170 -45º 1710-2170 +45º 1710-2170 +45º 1710-2170 -45º 1710-2170 -45º 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN 7-16 DIN Horizontal Pattern Vertical Pattern 1710-2170MHz Mechanical Specifications Connector Type 6 X 7-16 DIN(F) Weight 70kG Max.Xpol Tri-Sector 1710-2170 65º 18.8dBi 17. 79 LTE Extra-wide Band Antennas 1710-2690MHz Dual Polarization +45°/–45° Base Station Antennas 80 . 5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max. Wind Velocity 200km/h Dimension 730 X 162 X 95mm . 180º±30º ＞ 25dB Isolation ＞ 30dB Cross-polar Ratio.Xpol Panel 1710-2690MHz 65º 15dBi VET0º-15º Adjustable Electrical Down Tilt: manual or optional ACU Part Number S-Wave EW-65-15DV15 Electrical Specifications Frequency Range 1710-2690MHz Polarization ±45º Gain 15dBi Horizontal 3dB Beam Width 65º Vertical 3dB Beam Width 14º Electrical Down Tilt 0º-15º First Upper Sidelobe Suppression ＞ 15dB Front to Back Ratio. Power Per Input 300W Horizontal Pattern 1710-2690MHz Vertical Pattern 1710-2690 +45º 1710-2690 -45º 7-16 DIN 7-16 DIN Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 5kg Max. 0º ＞ 15dB Impedance 50Ω VSWR ＜ 1. 180º±30º ＞ 25dB Isolation ＞ 30dB Cross-polar Ratio. 0º ＞ 15dB Impedance 50Ω VSWR ＜ 1. Wind Velocity 200km/h Dimension 1250 X 162 X 95mm 82 .5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max.81 Xpol Panel 1710-2690MHz 65º 18dBi VET0º-10º Adjustable Electrical Down Tilt: manual or optional ACU Part Number S-Wave EW-65-18DV10 Electrical Specifications Frequency Range 1710-2690MHz Polarization ±45º Gain 18dBi Horizontal 3dB Beam Width 65º Vertical 3dB Beam Width 7º Electrical Down Tilt 0º-10º First Upper Sidelobe Suppression ＞ 15dB Front to Back Ratio. Power Per Input 300W Horizontal Pattern 1710-2690MHz Vertical Pattern 1710-2690 +45º 1710-2690 -45º 7-16 DIN 7-16 DIN Mechanical Specifications Connector Type 2 X 7-16 DIN(F) Weight 7kg Max. 0º ＞ 15dB Impedance 50Ω VSWR ＜ 1. Wind Velocity 200km/h Dimension 730 X 295 X 115mm .5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max. Power Per Input 300W Horizontal Pattern 1710-2690MHz Vertical Pattern 1710-2690 -45º 1710-2690 +45º 7-16 DIN 1710-2690 -45º 1710-2690 +45º 7-16 DIN 7-16 DIN 7-16 DIN Mechanical Specifications Connector Type 4 X 7-16 DIN(F) Weight 10kg Max. 180º±30º ＞ 25dB Isolation ＞ 30dB Cross-polar Ratio.Dual Band Panel 1710-2690MHz 65º 15dBi VET0º-15º Adjustable Electrical Down Tilt: manual or optional ACU Part Number S-Wave EW/EW-65-15DV15 Electrical Specifications Frequency Range 1710-2690MHz Polarization ±45º Gain 2X15dBi Horizontal 3dB Beam Width 65º Vertical 3dB Beam Width 14º Electrical Down Tilt 0º-15º First Upper Sidelobe Suppression ＞ 15dB Front to Back Ratio. Wind Velocity 200km/h Dimension 1250 X 295 X 115mm 84 . 0º ＞ 15dB Impedance 50Ω VSWR ＜ 1.5 IMD3 @ 2 X 43dBm Carrier ＜ -150dBc Max.83 Dual Band Panel 1710-2690MHz 65º 18dBi VET0º-10º Adjustable Electrical Down Tilt: manual or optional ACU Part Number S-Wave EW/EW-65-18DV10 Electrical Specifications Frequency Range 1710-2690MHz Polarization ±45º Gain 2X18dBi Horizontal 3dB Beam Width 65º Vertical 3dB Beam Width 7º Electrical Down Tilt 0º-10º First Upper Sidelobe Suppression ＞ 15dB Front to Back Ratio. 180º±30º ＞ 25dB Isolation ＞ 30dB Cross-polar Ratio. Power Per Input 300W Horizontal Pattern 1710-2690MHz Vertical Pattern 1710-2690 -45º 1710-2690 +45º 7-16 DIN 1710-2690 -45º 1710-2690 +45º 7-16 DIN 7-16 DIN 7-16 DIN Mechanical Specifications Connector Type 4 X 7-16 DIN(F) Weight 14kg Max. Remote Electrical Tilt (RET) Base Station Antennas . and is connected to the ACU through an AISG cable. The ACU then adjusts the electric tilt of the VET antenna.85 RET Product List • Variable Electrical Tilt Antenna (VET Antenna) • Antenna Control Unit (ACU) • AISG Control Cable Assembly (CCA) • Protocol Convert Adaptor (PCA ) • Portable Control Unit (PCU) • Smart Bias-Tee (SBT) 2) The following method does not need to use a long run AISG compliant CCA. 86 . RET System 1. RET System 1) Each Central Control Unit (CCU). a second SBT is used to demodulate the data from the RF feeder cable. On the tower a SBT is used to demodulate the data. On the tower. When the VET antenna is not connected to the ACU. The CCU. Portable Control Unit (PCU) or Operation & Maintenance Terminal (OMT) is connected to the ACU using an AISG compliant Control Cable Assembly (CCA). its electrical down-tilt angle can be adjusted manually. The ACU then adjusts the electric tilt of the VET antenna.Connection of VET Antenna and ACU The Variable Electrical Tilt (VET) antenna can be adjusted when it is connected to the Antenna Control Unit (ACU). through an AISG cable. Ethernet or Wireless MODEM ports. The ACU can then be commanded to adjust the electric tilt of the VET antenna. and is connected to the ACU Antenna Control Unit (ACU) AISG Connector 2. PCU or OMT uses a Smart Bias Tee (SBT) to modulate the data onto the RF feeder cable. 3) The AISG protocol is processed with the Base Station onto the RF feeder cable to tower. The CCU sends commands and data to the ACU via the computer’s RS232. Alarm Management • User-friendly interface to receive and interpret error messages. • Ability to assign severity levels to each defined error code. • Assign and manage access privileges. City. • Store site access procedures / protocols. Area. • Export data to EXCEL for additional processing. etc. time or severity level. GPS coordinates. • Maintain internal and external contact information. RAS. 3. • Assign logical grouping by Region. • Alarm filtering by area. Operation and Maintenance Center (OMC) System OMC software from Rosenberger enables operators to remotely control and monitor AISG devices distributed throughout their network. The ACU then adjusts the electric tilt of the VET antenna. location. Engineers use OMC software to communicate via Ethernet with Center Control Units (CCU’s) at each cell site to send and receive commands to RET. • Maintain and communicate site status. tilt changes. Batch Scheduling • Quickly reconfigure a large number of sites for seasonal changes or event optimization. The system has a user-friendly alarm interface to manage error messages and network connectivity problems as well as provide a centralized database for site configuration data. • Remotely calibrate or re-configure installed devices. • Monitor and report network connectivity issues. Remote Site Monitoring • Monitor and report device alarms. Site Management • Add new sites or remove existing sites. • Produce formatted reports to show site information. • Assign and manage user passwords. • Store and maintain list of installed equipment. Remote Site Control • Change the electrical tilt or azimuth bearing of installed RET / RAS antennas. User Management • Add / Delete users to the system. Site History • Alarm history • Site change history Site Configuration • Site name. Reporting • Query database and filter results to quickly review desired data. . • Schedule site polling to update control database. etc. TMA and any other installed AISG devices.4) The AISG protocol is processed in a Remote Radio Unit (RRU). The RRU is connected to the ACU through an AISG cable. 87 Antenna Control Unit (ACU) Main Features The Antenna Control Unit (ACU) is used with Rosenberger base station antennas with adjustable electrical down-tilt and appropriate mechanical interfaces. pin 6). <15 W (motor activated) 2 x 8 pin connector according to IEC 60130-9 Connectors AISG Daisy Chain in: male AISG Daisy Chain out: female RS 485A/B (pin 5. according to AISG Adjustment Time (Full Range) 120 sec (typically.000 Environmental Specifications Operating Temperature Range -40°C to +60°C Storage Temperature Range -40°C to +85°C Protection Class IP65(with antenna) Mechanical Specifications Input 2 × 8 pin connector according to IEC 60130-9 Connector Position Bottom Color RAL 7035.1 and 3GPP/AISG 2.. light grey Dimension 161 x 72 x 58mm Weight 350g Housing Material Profile: Aluminum.1 3GPP/AISG 2. pin 6) Power Consumption < 2 W (stand by). pin 3). depending on antenna type) Adjustment Cycles > 50. Cover: Zinc die cast 88 . • Compliant to AISG 1. 30 V (pin 1.0 • Compact size • AISG Daisy Chain • Suitable for operation under outdoor conditions Type No S-Wave ACU-001 S-Wave ACU-002 Electrical Specifications Protocols Logical Interface Compliant to AISG 1. DC return (pin 7). Hardware Interfaces power supply (pin 1.1 and 3GPP/AISG 2..0 Input Voltage Range 10 .0 AISG 1. Quantity 3 Total Conductors. Quantity 2 Power Conductor Type 0. Maximum 300V Environmental Specifications Operating Temperature Range -40°C to +70 °C (-40°F to +158 °F) Protection Class IP 67 Mechanical Specifications AISG Connector A 8pin DIN Female AISG Connector B 8pin DIN Male Braid Coverage 85% Data Conductor Type 0.0m .0/AISG 1.AISG Control Cable Assembly (CCA) Main Features • AISG RET Control Cable.75 mm² (20 AWG) stranded Power Conductors.32 mm² (24 AWG) twisted pair Data Conductors. 1 m • Feeds data and power to RET system components • AISG and RoHS compliant Type No 8Pin(F)-1000-8Pin(M)-AISG Electrical Specifications Protocol 3GPP/AISG 2.000 mm Length 1. Quantity 5 Shield Material Aluminum Jacket Material Fire retardant PU Color Black Diameter Over Jacket 8.1 Voltage. 5 x 92 x 34.4V Li 2Ah Power Supply To PCU DC24V.1 / 3GPP AISG2.1° steps AISG Output 8 pin female DIN 60130-9 Power 2-pole socket.1 and 3GPP/AISG2 capable • Portable and lightweight • Rechargeable LI-ION battery • No external power source required • Backlight LCD display • Pushbutton control Type No S-Wave PCU-ANT-001 Electrical Specifications Power Rechargeable battery–14.7A Output Voltage to Antenna AISG female Pin 1: 12V ± 1V AISG female Pin 6: DC 24V ± 1V. 5.88 Portable Control Unit (PCU) Main Features • AISG1.7mm/2.0 Interface to Antenna RS485 (AISG female pins 3 and 5) @ 9600 baud Power supply (AISG female pin 6/ pin 1) Tilt Reading Resolution 0.5mm Weight 550g Housing Material ABS 89 . 2.0mm Display Monochrome graphic LCD Environmental Specifications Operating Temperature Range 0°C to +45°C Storage Temperature Range -20°C to +65 °C Mechanical Specifications (Portable Controller Unit) Dimension 211. Battery 15V±1V Maximum Output Current 2A Output Protection Over-current and low-voltage protection AISG1. noncondensing Mechanical Specifications Connector 1×8 pin connector according to IEC 60130-9 conforms to AISG RF-connector SMA Color RAL 7035.0 standards • Compact size • AISG Daisy Chain • Simple connection to any USB port of the PC – driver provided • Portable for RET antenna setup and optimization • Pushbutton control Type No S-Wave PCA-001 Electrical Specifications Protocol AISG 1.7 A @ 24 V Hardware Interfaces RS 485A/B(pin 5.4 X 49mm weight 290g Housing material Profile: Aluminum.lightgrey Dimension 151 X 52. drivers. pin 6).1 | AISG 2.1 and 2.0 Input Voltage Range 12V pin 1. and manual) • Installation guide • Carrying case . 24V pin 6 Output Current at Voltage 2. pin 3). DC return(pin 7) Electrical Safety Standard IEC 60950 1 Power Supply DC Jack Environmental Specifications Operating Temperature Range 0°C to +40°C Relative Humidity Up to 95%. Cover: Zinc diecast Includes • Protocol Convert Adapter • External power supply (24 VDC / 65W) • AC power cable • USB cable • CD-ROM (with PCA software.Protocol Convert Adaptor (PCA ) Main Features The PCA is an integral part of the Rosenberger remote antenna control system. power supply(pin 1. The device links a PC to the AISG antenna system and is used in coordination with Rosenberger’s OMT-ALD software to control ALD • Compliant with AISG 1. Connectors Type Port2 7-16 female.461 Environmental Specifications Operating Temperature Range -40°C to +60°C Storage Temperature Range -40°C to +85°C Relative Humidity 5% .91 Smart Bias-Tee (SBT) Main Features • Conversion between OOK and RS485 standard signal • Low PIM rejection performance • Low insertion loss and high output power handling capability • Feeding DC to supply cable • Built-in lighting protection • Simple installation Type No SBT-6F-D-01 800-2170MHz Smart Bias Tee Electrical Specifications Frequency 806 to 960MHz and 1710 to 2170MHz Return Loss/VSWR < -20dB/<1. Port DC/ACU 8-pin male MTBF >500. with 2*20W ) Power Handl ng 55dBm(Average RMS) Power Supply 9-30V Current Consumption ≤ 50mA Current Handling ≤ 1.22 Impedance 50 Ω Insertion Loss < 0.95% Barometric Pressure 55 KPa -106KPa Storage Temperature Range Indoor or Outdoor (IP66) Mechanical Specifications Port1 DIN 7-16 male.3A Modem Communication 3GPP TS 25.000 hrs Ingress Protection IP66 Packing 1 92 .2dB PIM < -160dBc(3rd order. INSTALLATION KITS Base Station Antennas . Completely wrap the connectors with weather proof glue and tape as needed.93 Installation Instruction 1. 94 . Assemble the mounting bracket kit enclosed in the antenna package per the instructions. Attach the mounting bracket to the back of the antenna as the following examples. Connect the jumpers to 7/16 DIN connectors of the antenna. 2. washer and nut are tightened securely. and verify that each bolt. For Variable Electrical Tilt antennas without a Remote Control Unit. . Hoist the antenna with jumpers to the installation location.3. Please note that the nuts should not be tightened until step 4 is completed. Adjust the azimuth and mechanical down-tilt angle as required and restrain the jumpers connected to the antenna as appropriate. manually adjust the electrical down tilt angle as required. 4. Attach the antenna to the mast. 95 5. 16] Wrench [13. 16] Wrench [13. 16] 96 . • DO NOT use a metal ladder. Strong RF fields are present when the transmitter is on. Select your installation site carefully. 14.6 9. avoid standing directly in front of the antenna. 14. • DO NOT work on a wet or windy day. • When the system is operational. 16] Wrench [13. Installation Kits Mounting bracket P/N S-Wave 67-1 S-Wave 67-2 S-Wave 67-3 S-Wave 67-5 S-Wave 70-1 Weight (kg) 4. GSM1800 Low gain Multi-band VET High Antennas φ50-φ110 mm φ50-φ110 mm Antenna Series gain Antennas Suitable Mast Diameter φ50-φ110 mm φ50-φ110 mm φ50-φ110 mm Material Q235/SS304 Q235/SS304 Q235/SS304 Q235/SS304 Q235/SS304 Fix point 2 3 1 2 2 Installation Tool Wrench [13. • DO dress properly (shoes with rubber soles and heels. rubber gloves. the distance from power lines should be at least twice the height of the antenna and mast combined.2 2. 14. Tighten each nut to the specific torque Nut Proposed Torque M6 8Nm M8 20Nm M10 50Nm M12 90Nm Safety Warning • THE INSTALLATION OF THIS PRODUCT NEAR ANY POWER LINES IS DANGEROUS. 16] Wrench [13.4 1. long sleeve shirt or jacket).4 CDMA800 & CDMA800& CDMA800 & TD Antennas GSM1800 & UMTS GSM900 65° GSM900M 33° High GSM900 & Antennas gain Antennas.9 5. 14. 14. Rosenberger SERVICE Base Station Antennas . scalability and efficiency. Rosenberger is much more than just a supplier – Rosenberger is a valued development partner and we will strive to meet new challenges in order to scale to new heights.97 Rosenberger offers professional services that improve network design. reliability. technical support and workshops for distributors and agents. We are committed to offering exceptional services for our customers. we also offer professional training. Our service core competences include: • Network optimization • Technical consultation • Customized product design • Installation & commissioning • Onsite training & supervision • System troubleshooting • After-sales services In addition. 98 . East Zone of Zhangjiang High-Tech Park Shanghai.RosenbergerAP. Ltd.com . Shanghai Division B7..3. 2013 Please visit our website: www. China 201707 Tel : (+86 21) 69214567 Fax : (+86 21) 69212923 Rosenberger Asia Pacific Electronic Co. Pingqian Industrial Park. Dongkeng Town Dongguan. Building E. Renqing Road. Tianzhu Airport Industrial Zone Beijing. China 201201 Tel : (+86 21) 58995997 Fax : (+86 21) 58995594 Rosenberger Asia Pacific Electronic Co. Ltd. 509. Anxiang Street. 303. Guangdong Province.Ltd. No. Dongguan Division 3rd Floor.RosenbergerAP.. 1st Edition. Block B.com Rosenberger (Shanghai) Technology Co. Qingpu Industrial Zone Shanghai.com www. No.. China Tel : (+86 769) 82802098 Fax : (+86 769) 82802099 Base Station Antennas Rosenberger All rights reserved.. No.Base Station Antennas Rosenberger Asia Pacific Electronic Co. Xinke Road. Ltd. China 101300 Tel : (+86 10) 80481995 Fax : (+86 10) 80497052 Email: sales@RosenbergerAP.