b513_quickconnectnozzlesystems

Quick-Connect Nozzle SystemsImprove spray system performance; reduce installation and maintenance time Experts in Spray Technology Spray Nozzles Spray Control Spray Analysis Spray Fabrication and ProMax Quick WhirlJet® (hollow cone spray pattern) spray tips. TEFLON is a registered trademark of E.6 gpm at 40 psi (2. while a larger pipe inlet size of 21/32" eliminates the need for retrofit seals.85 to 12.51 to 2.ProMax® QuickJet® Clip-Eyelet® Nozzle Assembly orifice and tip seal. More clamping force — more inlet options Now available in four configurations with double clamp and enlarged inlet options. DuPont de Nemours and Company.I.6 to 13.19 to 2. Also offered are wide-angle models with seven capacities ranging from . Plus.6 to 32.0 to 3. glass-reinforced engineering grade of polypropylene. ProMax material resists chemical attack Constructed of a chemically coupled. The No. clogging and build-up. With a simple quarter turn. rinsing.0 gpm at 40 psi (4. VITON is a registered trademark of DuPont Dow Elastomers. as well as withstanding caking. A standard TEFLON®coated VITON® tip seal provides a positive seal between the ball and the tip.10 to 3.9 gpm at 40 psi (. plus a wide variety of conventional nozzles when used with the threaded ball. Choose from a variety of spray patterns. the ProMax Clip-Eyelet nozzle assembly offers added power and flexibility to economically New satisfy your application needs. solvents. allows you to quickly and accurately change the direction of the spray without disturbing the pipe connection.7 l/min at 4 bar). tip installation and removal can be done by hand. With the ability to perform at liquid temperatures to 180°F at 100 psi (82°C at 7 bar). the ProMax nozzle combines strength and durability for excellent chemical resistance. The double clamp nozzle assembly has the stability and clamping force required to sustain spraying pressures up to 150 psi. you can finely tune the spray alignment to minimize overspray. a built-in internal stop ensures that the spray tip always locks into the correct position.5 l/min at 4 bar). Since this seal remains attached to the tip. Wide-angle ProMax WhirlJet tips have four capacities ranging from 1. Spray tips are automatically aligned with a 10˚ offset to provide proper coverage. and other caustics.7 l/min at 4 bar). No tools needed for installation and removal Maintenance downtime is dramatically reduced with the ProMax Clip-Eyelet nozzle. Tip installation is effortless with a “snapin” feel due to a pawl located on the spray tip. coating. ProMax Quick FullJet® (full cone spray pattern). with up to 56˚ of adjustability.3 to 11.0 l/min at 4 bar).0 to 7.7 l/min at 4 bar).46 to 13. A swivel-type ball nozzle body. The ProMax Quick WhirlJet tips are available with standard angles with capacities ranging from . 46500A — ProMax Clip-Eyelet nozzle assembly combines a “snap-on” pipe connection with easy-to-install and replace patented “winged” spray tips for added versatility and a no-slip grip in wet conditions. accidental loss or misplacement is prevented. in seconds and without tools. angles. Both single clamp and double clamp nozzle assemblies are available with a choice of two inlet sizes for accommodating 9/16" (14. ProMax nozzles are ideal for a variety of applications such as cleaning.0 gpm at 40 psi (.0 gpm at 40 psi (4. and wetting. The ProMax Quick VeeJet tips have six different angles with eight different capacities ranging from 1. The ProMax Quick FullJet tips are available with standard angles with ten capacities ranging from . As a result.5 mm) or 21/32" (17 mm) diameter drill holes. Easy tip removal allows quick inspection of the 2 . the ProMax Clip-Eyelet nozzle accepts ProMax Quick VeeJet® (flat spray pattern). acids. the ProMax material is well suited for spraying phosphates. and capacities Providing an unmatched spray tip selection to ensure the right pattern for your application. . (.5 mm) or 21/32" (17 mm) dia. VITON ProMax Spray Tip See pages 9-13 Retrofit Seal For headers with 27/32" (21 mm) diameter holes CP20580-BU SEAL.2 oz. Ordering Info PROMAX QUICKJET CLIP-EYELET NOZZLE ASSEMBLY AND SPRAY TIP ASSEMBLY SPRAY TIP *Clamp Design — (no designation) indicates Single Clamp. (. drilled pipe Double Clamp Body For pressures to 150 psi (10. VITON® Tip Seal Provides additional seal between tip and body CP7717-2/17-VI.08 kg) 2. 46500A D Nozzle Type *Clamp Design L – 1 – PP + QPTA 40 10 **Inlet Dia.08 kg) 3.— (no designation) indicates 9/16" (14.3 bar) Single Clamp Body For pressures to 60 psi (4 bar) Cap Seal CP7717-2/121-EPR CP7717-2/121-VI.7 oz. (.7 oz.2 oz.5 mm) dia. D indicates Double Clamp **Inlet Dia. Pipe Size Material Code Tip Type Spray Capacity Angle Size ProMax QuickJet Clip-Eyelet Nozzle Assembly Options Body Assemblies To fit 9/16" (14.09 kg) 3.09 kg) B 46500A _ _-1-1/2-PPB 46500A _ _-2-PPB Based on largest/heaviest version of each type. Color Coded Body Color Coded Cap To Clamp On Dimensions A B C Net Weight C A 46500A_ _-1-PP 46500A _ _-1-1/4-PP Medium Gray Medium Gray Black Black Light Gray Light Gray Light Gray Light Gray 1" pipe 1-1/4" pipe 1-1/2" pipe 2" pipe 1-3/4" (44 mm) 1-7/8" (48 mm) 2" (51mm) 2-3/8" (60 mm) 3-1/2" (89 mm) 3-11/16" (94 mm) 3-13/16" (97 mm) 4-1/16" (103 mm) 1-7/8" (48 mm) 1-7/8" (48 mm) 1-7/8" (48 mm) 1-15/16" (49 mm) 2. (. L indicates 21/32" (17 mm) dia.ProMax® QuickJet® Clip-Eyelet® Nozzle Assembly Specifications Dimensions & Weights 46500A ProMax® Clip-Eyelet® Assembly No. VITON Threaded Ball for Standard Nozzles For nozzles with 1/4" Male Connection CP20582-1/4-PPB (NPT) CPB20582-1/4-PPB (BSPT) For nozzles with 3/8" Male Connection CP20582-3/8-PPB (NPT) CPB20582-3/8-PPB (BSPT) Blank Tip QPA PLUG 3 . BUNA-N CP20580-VI SEAL. and a ProMax® ball for use with ProMax FullJet®. the Clip-Eyelet nozzle assembly offers the consistent spray patterns. or 2" pipe. and chemical resistance needed for effective cleaning. New Double clamp and large inlet options The standard Clip-Eyelet nozzle assembly offers greater flexibility with the addition of double clamp and larger pipe inlet designs. even coverage. The spray tips feature spray angles from 15° to 80° with capacities ranging from . and secured by twisting the cap — all by hand. The double clamp configuration enables spraying operations to sustain pressures up to 150 psi while the larger pipe inlet size for 21/32" openings. It can operate at liquid temperatures up to 180˚F at 100 psi (82˚C at 7 bar) in the double clamp design. They’re clearly marked for quick identification. a blank spray tip which stops the flow of liquid. 4 . coating. you’ll save time with the Clip-Eyelet nozzle assembly. Designed to ensure easy installation and minimal maintenance downtime. the nozzle assembly withstands high temperatures and resists corrosion. Each assembly is available with single or double clamp configurations and a choice of two inlet sizes to accommodate 9/16" (14. options include a threaded ball that accepts a wide variety of conventional nozzles. eliminates the need for retrofit seals. VeeJet®.2 to 46 l/min).2 gpm (1. 1-1/4". The nozzle tip is then installed. 1-1/2". These ball-type flat and hollow cone spray tips allow the spray pattern to be directed very precisely at the surfaces being sprayed. and rinsing. the No.5 mm) or 21/32" (17 mm) diameter drill holes. and require minimal attention. align easily. 20570 — Clip-Eyelet nozzle assembly simply snaps onto an existing header. Manufactured of glass-reinforced polypropylene. and WhirlJet® spray tips. fit snugly into place. Several additional spray tip options for extra versatility For added versatility. Ball-type spray tips allow precise direction of flat or hollow cone spray More than 30 different configurations of spray tips are available for the Clip-Eyelet nozzle assembly.Clip-Eyelet® Nozzle Assembly Built to withstand high temperature and corrosion Along with convenience. Whether you’re removing the entire assembly or just changing a spray tip. aligned. All of the assembly’s parts are designed for easy handling.35 to 12. The assembly is affixed to the header by a spring grade stainless steel clamp which fits a 1". (.08 kg) 3. VITON Ball-Type Spray Tip See pages 14 and 15 Threaded Ball for Standard Nozzles For nozzles with 1/4" Male Connection CP20582-1/4-PPB (NPT) CPB20582-1/4-PPB (BSPT) For nozzles with 3/8" Male Connection CP20582-3/8-PPB (NPT) CPB20582-3/8-PPB (BSPT) Blank Tip CT PLUG – PP 5 .3 bar) Single Clamp Body For pressures to 60 psi (4 bar) Cap Seal CP7717-2/121-EPR CP7717-2/121-VI.Clip-Eyelet® Nozzle Assembly Specifications Dimensions & Weights 20570 Clip-Eyelet Assembly No.09 kg) 20570 _ _-1-1/4-PP B 20570 _ _-1-1/2-PPB 20570 _ _-2-PPB Based on largest/heaviest version of each type. Pipe Size Material Code Tip Type Spray Capacity Angle Size Material Code Clip-Eyelet Nozzle Assembly Options Body Assemblies To fit 9/16" (14.5 mm) dia. L indicates 21/32" (17 mm) dia.09 kg) 3. drilled pipe Double Clamp Body For pressures to 150 psi (10.7 oz. — (no designation) indicates 9/16" (14. (. VITON® Retrofit Seal For headers with 27/32" (21 mm) diameter holes CP20580-BU SEAL.2 oz.2 oz.08 kg) 2. Color Coded Body Color Coded Cap To Clamp On Dimensions A B C Net Weight C 20570_ _-1-PP A Medium Gray Medium Gray Black Black Light Gray Light Gray Light Gray Light Gray 1" pipe 1-1/4" pipe 1-1/2" pipe 2" pipe 1-3/4" (44 mm) 1-7/8" (48 mm) 2" (51 mm) 2-3/8" (60 mm) 2-7/8" (73 mm) 3-1/16" (78 mm) 3-3/16" (81 mm) 3-7/16" (87 mm) 1-7/8" (48 mm) 1-7/8" (48 mm) 1-7/8" (48 mm) 1-15/16" (49 mm) 2. 20570 D Nozzle Type *Clamp Design L – 1 – PP + CT 50 30 – PP **Inlet Dia. (. (. D indicates Double Clamp **Inlet Dia..7 oz.5 mm) or 21/32" (17 mm) dia. BUNA-N CP20580-VI SEAL. Ordering Info CLIP-EYELET NOZZLE ASSEMBLY AND SPRAY TIP ASSEMBLY SPRAY TIP *Clamp Design — (no designation) indicates Single Clamp. It operates at a maximum pressure of 125 psi (8. that combines strength and durability with chemical resistance. #2 and #3 Phillips head screwdrivers. FullJet®. The seal and O-ring are made of EPDM. Choose from a variety of ball/tip options The HP Eyelet accepts four different ball/tip options. the smooth internal surfaces of the assembly resist scale and chemical build-up. The assembly’s hinged body only requires one screw for hand tightening to the spray header. The No. chemical. For added convenience. and WhirlJet® spray tips. a ProMax QuickJet® ball for use with ProMax VeeJet®. A VITON® seal and O-ring are optional. Optional retrofit seals fit existing hole diameters of 21/32" (17 mm) or 27/32" (21 mm). 38625 — HP Eyelet is the first assembly of its kind that can be easily installed and removed by hand. The assembly can also be easily retrofitted to an existing system. The assembly features a square body for excellent stability.5 mm) diameter predrilled pipe opening. the HP Eyelet is designed to fit a 9/16" (14. Included are color-coded ball-type spray tips. Easily retrofitted to existing piping systems Available for 1-1/4" or 1-1/2" pipe sizes. 6 . Plus.6 bar) and a maximum temperature of 180°F (82°C) — making it a good choice for metal pretreatment. and car/truck washing applications. This helps prevent rotation when the retaining cap is removed or tightened. and a blank tip which blocks the liquid flow in a selected spray zone. the screw also accepts standard slotted head screwdrivers. or 5/32" Allen wrenches. The screw may be installed from either side of the assembly for easy access. food processing.HP Eyelet Nozzle Assembly Built to resist chemical attack The hinged body is molded of ProMax® material. with a polyphthalamide cap. electronics. It also remains attached to the assembly when loosened to eliminate the chance of loss or misplacement. a threaded ball for use with threaded spray nozzles. Ordering Info PROMAX HP EYELET NOZZLE ASSEMBLY AND SPRAY TIP ASSEMBLY PROMAX BALL SPRAY TIP Ordering Info HP EYELET NOZZLE ASSEMBLY AND SPRAY TIP ASSEMBLY SPRAY TIP 38625-1-1/4-PP+CP46679-PP+QPTA 25 02 Nozzle Type Pipe Size Material Code Ball No. BUNA-N CP20580-VI SEAL.) 3.1/4 .PPB (BSPT) For nozzles with 3/8" Male Connection CP20582-3/8.) 38625-1-1/2-PP 1-1/2" pipe Based on largest/heaviest version of each type.PPB (NPT) CPB20582-3/8.11 kg. (.9 oz. BUNA-N CP20579-VI SEAL. VITON® Retrofit Seals ProMax Ball and Spray Tip CP46679-PP+Spray Tip See pages 9-13 For headers with 21/32" (17 mm) diameter holes CP20579-BU SEAL.HP Eyelet Nozzle Assembly Specifications Dimensions & Weights 38625 C A Hinged Split-Eyelet Body Assembly To Clamp On Dimensions A B C D Net Weight B 38625-1-1/4-PP 1-1/4" pipe D 4-3/16" (106 mm) 4-5/16" (110 mm) 1-1/4" (32 mm) 1-11/32" (34 mm) 3-1/4" (83 mm) 3-1/2" (89 mm) 1-3/4" (44 mm) 1-3/4" (44 mm) 3. Tip Type Spray Capacity Angle Size 38625 – 1-1/4 – PP + CT 50 30 – PP Nozzle Type Pipe Size Material Code Tip Type Spray Capacity Angle Size Material Code HP Eyelet Nozzle Assembly Options Ball-Type Spray Tip See pages 14 and 15 O-Ring Seal (Cap) CP7717-2/121-VI. VITON For headers with 27/32" (21 mm) diameter holes CP20580-BU SEAL.PPB (BSPT) Blank Tip QPA PLUG or CT PLUG . VITON Threaded Ball for Standard Nozzles For nozzles with 1/4" Male Connection CP20582 . (.PP 7 .9 oz.11 kg.PPB (NPT) CPB20582 .1/4 . Clip-Eyelet Nozzle Clip-Eyelet nozzles are used for the pretreatment of aluminum channels prior to painting. ProMax QuickJet Clip-Eyelet Nozzle – full cone spray ProMax QuickJet Clip-Eyelet nozzles with a full cone spray are used to cool canned tomato products on a line-type cooling conveyor. HP Eyelet Nozzle HP Eyelet nozzles with ProMax flat spray tips are used to clean large. 8 . off-road construction equipment wheels.Common Application Problems and Possible Quick-Connect Nozzle System Solutions ® ® ® ProMax® QuickJet® Clip-Eyelet® Nozzle – flat spray ProMax QuickJet Clip-Eyelet nozzles with a flat spray are used to clean automotive bodies and component parts in an electrocoat washer before painting. 2 1.4 15.9 9.0 2.7 7.7 18.7 16.3 3.5 bar.6 80 psi 1.2 1.7 •* •* •* • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 10 15 20 30 40 50 60 70 White Gray Black Orange Green Yellow Blue Red *Not recommended below 7 psi.2 16.2 7.0 gpm (15.9 16.7 1 bar 2.1 2.7 2.6 8.9 11.7 22 28 33 39 7 bar 6.8 19.3 1.0 60 psi 1.4 3.6 2.9 11.5 12.8 l/min) Capacities at 40 psi (3 bar).1 2.4 2.0 6.9 l/min) QPTA_20 2.3 8.8 15.8 2.5 10 psi .35 .1 11.0 gpm (19.9 l/min) QPTA_15 1.5 2.0 1.0 gpm (11.2 4.9 l/min) QPTA_30 3.1 1.5 9.0 6.Spray Tips for the ProMax®Clip-Eyelet® Nozzle Assembly and ProMax HP Eyelet Nozzle Assembly ProMax Quick VeeJet® Spray Tips Standard Angle Flat Spray Specifications QPTA_10 1.4 13.6 6.53 .8 17.2 23 27 32 5 bar 5.4 1. 9 .5 4.9 7.0 3. QPTA_50 5.3 20 25 31 36 6 bar 5.5 9.5 gpm (5.5 3.8 l/min) QPTA_40 4.1 13.71 1.0 12.0 4.0 3.2 15.1 8.4 4.2 4.7 24 28 4 bar 4.1 24 30 36 42 14 bar 8.0 gpm (7.4 4.0 2 bar 3.5 3.7 8.75 1.8 6.1 2.6 3.5 2.7 12.1 200 psi 2.5 6.6 10.9 100 psi 1.5 20 psi .3 7.8 9.5 4.2 6.1 7.71 1.8 9.2 13.3 bar 1.1 19.8 3.7 l/min) QPTA_60 6.3 5.8 2.86 1.5 3.0 gpm (28 l/min) Performance Data Spray Angle at 40 psi Capacity Size Spray Tip Color Capacity (gallons per minute) 25° 40° 50° 65° 80° 95° 5 psi .1 7.9 2.50 .7 6.2 3.9 6.2 5.8 4.9 30 psi . Spray Angle at 3 bar Capacity Size Spray Tip Color Capacity (liters per minute) 25° 40° 50° 65° 80° 95° 0.0 1.0 gpm (24 l/min) QPTA_70 7.0 9.1 26 34 43 51 60 •* •* •* • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 10 15 20 30 40 50 60 70 White Gray Black Orange Green Yellow Blue Red *Not recommended below 0.6 6.1 40 psi 1.0 7.0 5.4 11.4 2.2 4.1 18.9 5.5 11.3 23 3 bar 3.5 8.1 1.0 gpm (3.7 4.7 5. 7 bar 58° 65° 50° 65° 50° 65° 50° 65° 67° 85° 6 bar 53° 59° 46° 59° 46° 59° 46° 61° 61° 80° QPHA1 QPHA1.30 .2 2.65 .80 1.3 1.19 .14 . 10 .9 60 psi .94 1.6 2.5 QPHA5 QPHA6.141" .3 3 bar .5 80 psi .5 QPHA2 QPHA3 QPHA3.5 QPHA8 QPHA10 QPHA15 Brown White Gray Black Orange Green Yellow Beige Blue Red .* Capacity (gallons per minute) Spray Angle 5 psi — — .0 7.74 l/min) QPHA1.1 7.063" .089" .28 .23 .3 7 psi — 52° 43° 52° 43° 52° 45° 54° 58° 80° 20 psi 58° 65° 50° 65° 50° 65° 50° 65° 67° 85° 80 psi 53° 59° 46° 59° 46° 59° 46° 61° 61° 80° QPHA1 QPHA1.30 .36 .5 7.14 .4 11.4 2.5 2.6 l/min) QPHA5 .29 gpm (1.3 4.4 0.5 bar — . Nom.5 6.077" .5 1.8 l/min) QPHA10 1.5 gpm (6.9 2.050" .19 gpm (.0 1.4 1.30 .1 8.025" .1 6.5 QPHA2 QPHA3 QPHA3.38 gpm (1.8 10 bar 1.6 11.5 9.5 1.1 1.2 4 bar .67 .7 4.0 4.6 .5 4.0 4.3 1.1 l/min) QPHA2 .0 16.063" .0 13.4 8.9 2.0 1.2 1.58 .0 3.1 1.55 .57 gpm (2.* mm Capacity (liters per minute) Spray Angle 0.3 2.42 .58 .6 5.79 .5 QPHA5 QPHA6.85 1.57 .26 .5 l/min) QPHA3 . mm Max.54 .6 1.74 1.38 .9 2.4 10.9 0.5 .113" .5 8.7 l/min) Capacities at 40 psi (3 bar).8 l/min) QPHA8 1.063" .35 .9 2.5 6.8 2.25 .3 1.5 1.5 QPHA8 QPHA10 QPHA15 Brown White Gray Black Orange Green Yellow Beige Blue Red . QPHA6.8 3.9 4.20 .9 gpm (7.1 15.7 8.88 1.5 19.1 3.40 .92 1.045" .9 3.2 10.9 2.7 5 bar .5 40 psi .93 1.46 .10 .5 20 psi .3 3.3 1.4 3.5 3.29 .64 . Nom.26 .040" .42 .5 3.5 bar — 52° 43° 52° 43° 52° 45° 54° 58° 80° 0.6 3.0 1.25 .4 l/min) QPHA15 2.1 2.65 . Max.040" .7 2.59 .6 1. Free Passage Dia.1 2 bar .44 .9 3.95 gpm (3.035" .3 5.Spray Tips for the ProMax® Clip-Eyelet® Nozzle Assembly and ProMax HP Eyelet Nozzle Assembly continued ProMax Quick FullJet® Spray Tips Standard Angle Full Cone Spray Specifications QPHA1 .2 l/min) QPHA3.3 1.0 4.1 1.4 2.2 5.1 7 psi — .4 *Foreign matter with maximum diameter as listed can pass through nozzle without clogging.7 4.3 1.061" .9 2.48 .2 1.4 14.0 100 psi .2 7 bar 1.2 3.50 .1 1.5 bar .62 .36 .9 5.8 2.81 1.34 .7 bar .7 2.76 1.7 2.38 . Free Passage Dia.047" .53 .69 .050" .5 .3 gpm (4.68 .5 2.4 150 psi .95 1.13 .17 .3 1.82 1.2 l/min) Performance Data Spray Tip Number Spray Tip Color Orifice Dia.063" .6 5.53 .6 2.8 6.89 1.1 2.1 1.7 6.2 9.69 .64 1.3 10 psi .67 gpm (2.3 2.1 1.98 1.7 2.3 1.6 1.22 .025" .6 3.49 .15 .0 1.5 1.21 .0 2.9 gpm (11.3 1.5 12.57 .9 2.5 1.3 3.35 .1 4.096" .063" Spray Tip Number Spray Tip Color Orifice Dia.47 .70 1.1 1.6 3.0 1.6 1.1 1.1 30 psi .3 4.2 3.81 1.89 1.17 .8 5.7 1.50 .85 1.7 3.8 8.4 6 bar 1.0 3.73 1.9 6.1 1.2 1. 8 13.8 7.5 bar — — 1.6W 1.1 3.1 10.0 1.0 2.109" .3 3.56 .050" .3 bar — — — — 112° 114° 114° 0.0 7 psi — — .1 80 psi .4 1.3 1.33 .67 .1 1.8 2.51 gpm (2.79 1.3 1.050" .38 . mm Max.91 1.5 3.4 1.76 1.43 .* mm Capacity (liters per minute) Spray Angle 0.0 1.6 1.5 4.2 2.8 3.3 1 bar 1.2 gpm (8.6 1.Spray Tips for the ProMax® Clip-Eyelet® Nozzle Assembly and ProMax HP Eyelet Nozzle Assembly continued ProMax Quick FullJet® Spray Tips Wide Angle Full Cone Spray Specifications QPHA2.86 1.8 11.9 2.2 5.8 gpm (7.3 bar — — — — 2.8 2.6 3.9 30 psi .5 3 bar 2.0 3.2 2.9 2.95 1.79 gpm (3.7 6 bar 2.063" Spray Tip Number Spray Tip Color Orifice Dia.51 .9 2.8 6.0 7.073" .7 0. Nom.7 0.5 5 psi — — — — 112° 114° 114° 10 psi 120° 120° 120° 120° 120° 120° 120° 80 psi 102° 102° 102° 103° 103° 103° 103° QPHA2.040" .057" .8 11.80 1.8 9.5 3.1 1.1 4 bar 2.3W QPHA5. QPHA12W 2.050" .5 gpm (5.8W QPHA4.0 1.8 4.7 4.28 .96 1.2 9.141" .6 3.3 1.7 2.89 1.2 2. 11 .7 20 psi .1 3.3 40 psi .086" .3 8.129" .68 .3W QPHA5.0 3.2 1.5 7.3W .4 1.6 4.2 2 bar 1.48 .6 5.1 l/min) Performance Data Spray Tip Number Spray Tip Color Orifice Dia.0 3.7 bar 1.5 3.6 1.0 l/min) QPHA4.5 2.61 .2 1.8 2.6 60 psi .1 1.9 12.040" .040" .4 2.2 8.0 l/min) QPHA8W 1.0 5.6 gpm (10.70 1. Free Passage Dia.3 1.58 .2 1.6 2.2 9.51 .2 l/min) Capacities at 40 psi (3 bar).4 15 psi .2 10 psi . Nom.7 bar 120° 120° 120° 120° 120° 120° 120° 6 bar 102° 102° 102° 103° 103° 103° 103° QPHA2.6W QPHA8W QPHA10W QPHA12W QPHA14W White Black Orange Green Yellow Blue Red 1.70 .6 0. Max.3 3.5 5 bar 2.6 6.9 5.1 l/min) QPHA5.2 1.4 4.6 8.1 4.45 .5 5.8 l/min) QPHA10W 1.3 3.1 7.7 l/min) QPHA14W 2.098" .9 4.6 *Foreign matter with maximum diameter as listed can pass through nozzle without clogging.7 10.5 1.8W QPHA4.74 . Free Passage Dia.0 1.0 1.6 3.3 6.* Capacity (gallons per minute) Spray Angle 5 psi — — — — .8W .0 gpm (4.6 3.6W QPHA8W QPHA10W QPHA12W QPHA14W White Black Orange Green Yellow Blue Red .0 1. 5 bar . Nom.3 6 bar .64 1.4 9.5 QPAA1 QPAA2 QPAA3 QPAA5 QPAA8 QPAA10 QPAA15 .51 1.46 .28 .2 16.7 80 psi .1 0.56 1.14 .4 3.3 1.97 1.46 .2 2.6 7.8 6.7 5 bar .8 4.5 bar 58° 64° 70° 79° 75° 72° 76° 72° 6 bar 69° 76° 80° 80° 79° 74° 75° 75° QPAA0.1 30 psi .70 1.1 18.8 3.64 .9 11.86 1.9 6.52 .6 12.7 2.4 3.6 2.199" .63 .20 .6 8.91 1.1 2. Capacity (gallons per minute) Spray Angle 3 psi — — — — — .85 1.063" . Nom.0 3.3 7.3 9.10 .43 .07 .40 .4 2.44 .2 2.7 4.0 2.95 1.7 2.2 4. Nom.0 1.50 .047" .4 5.2 3.2 12 .4 4.0 3.3 2.0 3.8 2.0 2.32 .2 6.79 1.6 2.2 19.1 8.0 1.55 .5 20 psi .39 .4 2 bar .82 5 psi — — .4 1.7 7 bar .14 .7 3 bar .0 2.078" .31 .5 QPAA1 QPAA2 QPAA3 QPAA5 QPAA8 QPAA10 QPAA15 .172" .1 1.1 5.188" .5 bar .6 40 psi .0 1.16 .20 .6 2.2 5.23 .4 2.203" Spray Tip Number Inlet Dia.2 bar — — — — — 1.10 .2 100 psi .67 .35 .1 1.6 4.094" .80 1.28 .031" .57 .9 11.73 1.16 .7 7 psi — — 53° 55° 70° 65° 70° 70° 20 psi 58° 64° 70° 79° 75° 72° 76° 72° 80 psi 69° 76° 80° 80° 79° 74° 75° 75° QPAA0.72 1.3 10 psi .8 1.17 .56 1.141" .3 3.05 .8 4.91 1.109" .09 .42 .30 .60 1.6 4.57 .1 13.1 4.5 bar — — 53° 55° 70° 65° 70° 70° 1.6 2.21 .172" .6 8.3 5.2 15.4 2.0 60 psi .9 3.24 .0 2.5 3. Orifice Dia.6 3.14 .2 1.6 2.23 .141" .4 2.6 2.1 0.4 3.063" . mm Orifice Dia.79 1.8 1 bar .84 1.6 6.49 .35 . mm Capacity (liters per minute) Spray Angle 0. Nom.28 .078" .8 4 bar .32 .60 1.6 2.6 6.6 4.17 .4 3.094" .1 7 psi — — .Spray Tips for the ProMax® Clip-Eyelet® Nozzle Assembly and ProMax HP Eyelet Nozzle Assembly continued ProMax Quick WhirlJet® Spray Tips Standard Angle and Wide Angle Hollow Cone Spray Specifications QPAA_ QPAA_W Performance-Data Standard Angle Spray Tip Number Inlet Dia.0 9.5 5.12 . 0 1.8 4 bar 4.5 20 psi .2 100 psi 1. Nom.177" .156" .177" .44 .6 2.5 5.0 6.70 1.0 60 psi 1.6 12.4 3.242" .7 3 bar 3.7 80 psi 1.0 3.4 1.3 7.2 6.129" . 13 .213" Spray Tip Number Inlet Dia.8 1 bar 2.9 6.0 4.6 2.50 .3 4.6 8.2 5.136" .72 1.1 3.4 2.8 4.0 9.3 10 psi .8 4.7 2.5 5. Capacity (gallons per minute) Spray Angle 3 psi — . mm Orifice Dia.4 Quick connect nozzles are mounted on an overhead conveyor system in a five section parts washer.7 5 bar 5.42 .4 2 bar 3.5 bar 1.9 11.6 2.Spray Tips for the ProMax® Clip-Eyelet® Nozzle Assembly and ProMax HP Eyelet Nozzle Assembly continued ProMax Quick WhirlJet® Spray Tips Standard Angle and Wide Angle Hollow Cone Spray Specifications continued Performance Data-Wide Angle Spray Tip Number Inlet Dia.3 2.57 .5 bar 125° 112° 111° 110° 1.4 9.5 4.2 bar — 1.5 bar 112° 100° 97° 98° 6 bar 98° 87° 89° 90° QPAA5W QPAA8W QPAA10W QPAA15W 3.67 .1 1.6 8.5 bar 2.6 2.82 5 psi .196" . Nom.3 6 bar 5.1 30 psi . Nom.8 1.2 16. Orifice Dia.1 7 psi .7 7 psi 125° 112° 111° 110° 20 psi 112° 100° 97° 98° 80 psi 98° 87° 89° 90° QPAA5W QPAA8W QPAA10W QPAA15W .0 1.1 13.6 3.3 9.2 2.1 0.2 10.7 7 bar 6.1 18.1 0.4 2.3 3.6 6.55 .5 3.5 5.2 4.80 1.6 40 psi 1.1 4.6 4.0 2.6 7.84 1.1 8.9 11.35 . Nom.2 15. mm Capacity (liters per minute) Spray Angle 0.0 3.86 1. 35 .9 l/min) CT_30 3.5 2.9 7.0 23 1.86 1.1 1 bar 2.3 bar 1.0 2.4 13.7 16.0 6.0 gpm (28 l/min) CT_100 10.5 9.0 gpm (7.0 2.2 14.0 60 psi 1.1 2.2 6.42 .1 30 psi .0 7.1 7.0 gpm (11.0 1.2 23 27 32 46 CT15100-PP CT25100-PP CT40100-PP CT50100-PP CT65100-PP CT80100-PP 14 .9 6.1 13.9 3.7 2.9 l/min) CT_20 2.8 9.4 1.5 2.1 2.0 gpm (39 l/min) Performance Data Spray Angle at 40 psi Cap.0 20 psi .6 8.4 13.1 1.7 4.2 10 psi .5 7 psi .71 1.84 1.7 12.5 5.2 2.7 19.6 3.5 .5 3. Size Tip Color Capacity (gallons per minute) 15° — — — — CT1550-PP — CT1570-PP 25° — — CT2530-PP — — CT2560-PP CT2570-PP 40° — CT4020-PP CT4030-PP CT4040-PP CT4050-PP CT4060-PP CT4070-PP 50° — CT5020-PP CT5030-PP CT5040-PP CT5050-PP CT5060-PP CT5070-PP 65° CT6510-PP CT6520-PP CT6530-PP CT6540-PP CT6550-PP CT6560-PP CT6570-PP 80° CT8010-PP — — CT8040-PP — CT8060-PP CT8070-PP 10 20 30 40 50 60 70 100 Beige Light Blue Orange Green Yellow Blue Red Brown 5 psi .4 2.8 5.2 7.9 4.0 3.5 8.6 9.2 2.5 bar 2.8 19.5 3.0 3.8 l/min) CT_50 5.3 5.1 19.0 gpm (3.50 1.3 8.0 gpm (24 l/min) CT_70 7.8 2.7 5.0 16.5 3.5 3.4 11.3 4.8 3.2 6.7 24 28 39 4 bar 4.1 8.6 6.3 1.0 5.7 l/min) Capacities at 40 psi (3 bar).1 2.5 11.5 4.3 19.8 5.0 4.0 gpm (15.7 12.8 15.6 40 psi 1.5 4.9 7.7 7.6 12.6 9.Spray Tips for the Clip-Eyelet® Nozzle Assembly and HP Eyelet Nozzle Assembly Flat Spray Tips Standard Angle Spray Specifications CT_10 1.7 18.9 16. CT_60 6.7 2.2 CT15100-PP CT25100-PP CT40100-PP CT50100-PP CT65100-PP CT80100-PP Spray Angle at 3 bar Cap.7 bar 1.0 gpm (19.0 6. Size Tip Color Capacity (liters per minute) 15° — — — — CT1550-PP — CT1570-PP 25° — — CT2530-PP — — CT2560-PP CT2570-PP 40° — CT4020-PP CT4030-PP CT4040-PP CT4050-PP CT4060-PP CT4070-PP 50° — CT5020-PP CT5030-PP CT5040-PP CT5050-PP CT5060-PP CT5070-PP 65° CT6510-PP CT6520-PP CT6530-PP CT6540-PP CT6550-PP CT6560-PP CT6570-PP 80° CT8010-PP — — CT8040-PP — CT8060-PP CT8070-PP 10 20 30 40 50 60 70 100 Beige Light Blue Orange Green Yellow Blue Red Brown 0.9 11.2 4.0 10.1 11.5 28 2 bar 3.71 1.8 l/min) CT_40 4.3 23 32 3 bar 3. 1-PP CA50-50.4 39. CA25-30.2 38.8 3 bar 17.3-PP Tip and Vane Sub-assembly No.0 5.1 30 psi 3.9 4.7 8.5 40 psi 4.5 17.5 bar 12.9 9.6 12. Capacity (liters per minute) Spray Angle at 3 bar 0.2 44.1-PP CA50-50.2 3.4 12.6 2 bar 14.3 2.8 50 psi 5.6 8.5 13.5 gpm (17.0 20 psi 3.1 10.1 11.7 22.8 gpm (38.4 0.6 2.5 13.1 5.5 .0 7.7 19.4 9.4 gpm (21.5 5.3 9.2 l/min) CA50-50.6 l/min) Capacities at 40 psi (3 bar).6 15.1 4.8 5.2 24.8 10.5 bar 46° 45° 38° 75° 1.9 7 psi 46° 45° 38° 75° 20 psi 49° 47° 46° 75° 60 psi 51° 50° 48° 76° CA15-30.9 60 psi 5.3-PP 15 .9 gpm (39.6 21.9 7.1 9.7 l/min) Performance Data Tip and Vane Sub-assembly No.8 27.1-PP CA50-50.7 bar 8.Spray Tips for the Clip-Eyelet® Nozzle Assembly and HP Eyelet Nozzle Assembly continued Hollow Cone Spray Tips Standard Angle Spray Specifications CA15-30.4 6.6 32.5 10 psi 2.5 3.7 1.0 19.0 6.4 27.4 l/min) CA50-50.0 31.1-PP CA25-30.2 7.5 bar 49° 47° 46° 75° 4 bar 51° 50° 48° 76° CA15-30.1-PP CA25-30.6 45. Capacity (gallons per minute) Spray Angle at 40 psi 5 psi 1.1-PP CA50-50.0 1 bar 10.7 4 bar 20.0 3.7 22.1 11.35 bar 6. Box 7900 • Wheaton. For assembly. All of our products and services are engineered with one goal in mind — optimizing your spray system. dimensions and weights. Spraying Systems Co. Request Bulletin No. including easy-to-install and replace spray tips. The time-saving installation and maintenance features of this nozzle.S. Metal Pre-Treatment Bulletin This newly revised bulletin highlights Spraying Systems Co. illustrated handbook is packed with tips for improving production efficiency through spray nozzle maintenance and automation. Request Catalog 20. turnkey systems. It details system problems. 410.A. The catalog reviews nozzle basics. Request Technical Manual No. 354E. lances. 2003 .S..000 spray nozzles. application solutions. common causes of problems and viable solutions.Other helpful resources and product information for specifying spray nozzles Industrial Spray Products Catalog 60B Spray System Optimization Handbook Our new 524-page catalog features tens of thousands of spray system solutions. You’ll find design features. It covers product information on nozzles. It also includes steps on defining performance standards. and ordering information all in a readable and easy-to-follow format.’s expanded line of ProMax nozzles. solving spray problems. With more than 60 years of helping customers solve spray problems and experience in over 200 industries. ProMax® QuickJet® Nozzles Bulletin This 52-page. system automation and engineering data. performance data. Request Bulletin 543. and custom fabrication. Represented by: P. and setting up your own maintenance programs. WindJet Air Knife & WindJet Air Knife Drying Packages ® This 12-page bulletin includes information on spray nozzles for improving finished product quality in the surface treatment process. spray research and analysis services. Our comprehensive spray solutions incorporate 80. is the world leader in spray technology. the brochure provides tables and configuration charts differentiated by the horsepower size of the blower. air guns and accessories. Request Catalog 60B. are described in detail. Request Bulletin No. 514. Illinois 60189-7900 USA Phone 1-800-95-SPRAY • Fax 1-888-95-SPRAY Outside the U. Included are applications and specifications on many spray nozzles and accessories designed for surface treatment. manifolds.spray.com Bulletin No. This 28-page catalog is a comprehensive guide to improving the performance of your air control applications. Air Control Application Performance Guide This 20-page bulletin presents components and performance data on WindJet® Air Knives and completely customizable WindJet Air Knife Drying Packages. Phone 1(630) 665-5000 • Fax 1(630) 260-0842 Visit our Web Site: http://www. ©Spraying Systems Co. 513B Printed in U.O.