Autronica Manual - Free Download PDF Ebook

System DescriptionAutroMaster ISEMS Integrated Safety and Emergency Management System 116-P-AMASTER-SYSTEM/XGB, Rev. A, 2011-11-25 COPYRIGHT © This publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. Autronica Fire and Security AS and its subsidaries assume no responsibility for any errors that may appear in the publication, or for damages arising from the information in it. No information in this publication should be regarded as a warranty made by Autronica Fire and Security AS. The information in this publication may be updated without notice. Product names mentioned in this publication may be trademarks. They are used only for identification. System Description, AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB, Rev. A, 2011-11-25, Autronica Fire and Security AS Page 2 Table of Contents 1. Introduction .......................................................................6 1.1 1.2 1.3 About this handbook ......................................................................... 6 The reader ......................................................................................... 6 Reference documentation ................................................................. 6 2. System Overview ..............................................................7 2.1 2.2 2.3 2.4 System Characteristics ..................................................................... 7 Platform ............................................................................................. 8 AutroMaster Editions ......................................................................... 9 Compatibility ...................................................................................... 10 2.4.1 AutroMaster/AutroMaster Compatibility Matrix ....................... 10 2.4.2 AutroMaster/AutroSafe Compatibility Matrix ........................... 10 2.4.3 AutroMaster/Autroprime Compatibility Matrix ......................... 11 2.4.4 AutroMaster/ Linux Compatibility Matrix ................................. 11 2.4.5 Compatibility with Peripheral Systems.................................... 12 2.4.6 Incompatibility with Earlier Versions of AutroMaster 5000 ..... 12 3. The Presentation Window ................................................13 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 Graphical Interfaces .......................................................................... 13 Customizing the Layout ..................................................................... 13 Elements in the Presentation Window .............................................. 14 Detail Pane ........................................................................................ 15 Static Navigation Pane ...................................................................... 15 Dynamic Navigation Pane ................................................................. 16 Mimic Control Pane ........................................................................... 16 Layer Control Pane ........................................................................... 17 More Text Pane ................................................................................. 17 Status Bar (configurable) .................................................................. 17 Symbols and Colours ........................................................................ 18 Buttons .............................................................................................. 20 3.12.1 Default Utility Buttons .............................................................. 20 3.12.2 Configurable Buttons .............................................................. 21 3.13 Indication of Status and Development of an Incipient Fire ............... 22 4. System Functions .............................................................23 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 Presentation of Secured/Alarmed Areas ........................................... 23 Control of Fire-Safety Equipment ...................................................... 23 Security-Clearance Level and User Identification ............................. 23 Information Layers............................................................................. 24 Report Generator .............................................................................. 25 History - System/Point ....................................................................... 26 Master-Slave Configuration............................................................... 27 Programmable Logic Controllers (PLC) Integration .......................... 27 ESPA 4.4.4 Messaging ..................................................................... 27 Duty Control ...................................................................................... 28 System Description, AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB, Rev. A, 2011-11-25, Autronica Fire and Security AS Page 3 4.11 4.12 4.13 4.14 4.15 4.16 4.17 4.18 4.19 4.20 4.21 4.22 4.23 4.24 4.25 4.26 4.27 4.28 4.29 4.30 4.31 Watchdog .......................................................................................... 28 Fire-Patrol Supervisor ....................................................................... 29 Door Control ...................................................................................... 29 Low-Location Lighting ....................................................................... 30 CCTV ................................................................................................. 30 Emergency Lighting - Dardo ............................................................. 30 Display Dimming ............................................................................... 31 Detector Group Management............................................................ 31 Disablement/Enablement of Detectors, Groups................................ 31 Voyage Data Recorder (VDR) Output ............................................... 32 Live Video Support ............................................................................ 32 Decision Support System .................................................................. 33 Electronic Plotting Table ................................................................... 34 Event Recording and Replay ............................................................ 35 Training and Simulation .................................................................... 36 Message Center ................................................................................ 37 Time Synchronization ........................................................................ 37 Multi-Language Support .................................................................... 37 Backup Tools..................................................................................... 38 Software Upgrade Tool ..................................................................... 38 Touch Screen Functionality............................................................... 38 5. AutroSafe Dual Safety Concept .......................................39 5.1 5.2 Overview ........................................................................................... 39 Example ............................................................................................ 39 6. AutroMaster ISEMS as an Integral Part of AutroSafe_3 ............................................................................41 6.1 6.2 6.3 Overview ........................................................................................... 41 Connection to Standalone Panel or an AUTROLON Ring ............... 41 Applications in Larger AutroSafe Systems ........................................ 42 6.3.1 Dual Ethernet Configuration.................................................... 43 7. AutroMaster ISEMS as an Integral Part of AutroSafe_4 ............................................................................44 7.1 7.2 7.3 Overview ........................................................................................... 44 Connection to a Standalone Panel.................................................... 44 Applications with Several AutroSafe Systems .................................. 45 7.3.1 Dual Ethernet Configuration.................................................... 46 8. AutroMaster ISEMS as an Integral Part of Autroprime ..............................................................................47 8.1 8.2 8.3 Overview ........................................................................................... 47 Connection to a Standalone Panel.................................................... 47 Autroprime as a TCP/IP Network Node ............................................ 48 8.3.1 Communication with AutroMaster ISEMS............................... 48 9. AutroMaster ISEMS as an Integral Part of BS-100 ........49 System Description, AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB, Rev. A, 2011-11-25, Autronica Fire and Security AS Page 4 9.1 9.2 Overview ........................................................................................... 49 System Diagram ................................................................................ 49 10. Reader’s Comments .........................................................51 System Description, AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB, Rev. A, 2011-11-25, Autronica Fire and Security AS Page 5 Autronica Fire and Security AS Page 6 . sales personnel. Introduction 1. 1.1 About this handbook This handbook provides a system overview of the AutroMaster Integrated Safety and Emergency Management System (AutroMaster ISEMS). A. 2011-11-25.Introduction 1.3 Reference documentation The AutroMaster ISEMS documentation consists of the following documents: Document Name System Description Basic Configuration Handbook Advanced Configuration Handbook Installation and Commissioning Handbook Operator’s Handbook Shortform User Guide Datasheet: AutroMaster ISEMS Part number 116-AMASTER-SYSTEM/XGB 116-AMASTER-BASICCONF/EGB 116-AMASTER-ADVCONF/EGB 116-AMASTER-INSTCOMM/IGB 116-AMASTER-OPERATE/FGB 116-AMASTER-USERGUI/LGB 116-AMASTER-ISEMS/CGB File name amastersystem_xgb amasterbasicconf_egb amasteradvconf_egb amasterinstcomm_igb amasteroperate_fgb amasterusergui_lgb amasterisems_cgb System Description. Rev. 1. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB.2 The reader This handbook is intended for consultants. potential customers and distributors. as well as status for the entire system using the built-in report generator. 2011-11-25. AutroMaster ISEMS uses colour graphics for the display of system events (smoke/heat development. core features include: detector-group management for logical grouping of detectors.1 System Characteristics AutroMaster ISEMS is an Integrated Safety and Emergency Management System which can be used together with the AutroSafe Interactive Fire Detection System and the BS-100 system. switching. ensuring information and control is available throughout the system. AutroMaster ISEMS can be distributed on a synchronized network. The system can be connected to a large number of fire-alarm panels of different types (such as operator. Rev. control or repeater panels) via a serial connection or an ethernet network. Autronica Fire and Security AS Page 7 . Navigation is fast and instinctual. The AutroMaster ISEMS has an intuitive control and monitoring interface. System Overview 2.). AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. and the powerful zoom functions allow you to monitor all areas in great detail. Control of the alarmed area and its subsystems are unlimited. A. providing detailed information so that necessary actions can be taken.System Overview 2. System Description. The system provides overviews of measured values for specific detectors. etc. these provide cost-efficient documentation and maintenance logs. door control. control of programmable logic controllers. CCTV systems and emergency lighting. providing an easy-to-understand graphical presentation of the premises and events that may occur. control of low-location lighting. Duty control allows delegation of duty between networked systems. placement. enablement/disablement of detectors and groups. Computer platform PC Operating system Cent0S 5. Autronica Fire and Security AS Page 8 . the following symbols are used to indicate information relating to a specific operating systems and/or types of fire detection systems: Symbol Comments The function is only available for AutroSafe panels connected to AutroMaster. The function is only available for BS-100 panels connected to AutroMaster. Registered trademarks.2 Platform AutroMaster uses Linux1 as an operating system. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. System Description. Rev. and whether it is connected to AutroSafe or Saia PLC.System Overview 2.6 AutroMaster functionality varies depending on which platform/ operating system it is running on. In this handbook. The function is only available for Autroprime panels connected to AutroMaster. 1) Linux is a registered trademark of Linus Torvalds. A. 2011-11-25. and BS-100 interface) MultiSensor control Report generator Control and monitoring of emergency lights/LLL Extended functionality AutroSafe IFG unit support Dual Safety (AutroSafe 4.4. the maritime market. Functions/Modules Oil & Gas Maritime Onshore ISEMS Basic functionality Fire management basic functions (AutroSafe. 2011-11-25. Autronica Fire and Security AS Page 9 .System Overview 2. including all functionality. Rev. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. In addition.x or later. there are three editions. and the onshore market (see details in the overview below).0.4 interface x x x x x x x x x x x x x x x x x x x NA x x NA x x x x x x x x x x x x x x x x x x x x x x x x x x x x System Description.3 or later) Touch screen support Decision support system/incident manager Electronic plotting table Training/simulation module Event record and replay module Video module (live video support CCTV) Remote connect function Message center module Interfaces Hernis CCTV interface System-S interface NMEA interface Saia PLC support VDR output Siemens S7 PLC support Modbus interface ESPA 4.3 AutroMaster Editions AutroMaster ISEMS is the full AutroMaster edition. one for the oil & gas market. Autroprime 2. A. 3 √ √ 4.0.3 √ 4. A.1.0 √ √ 4. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB.4.1 √ 4.0 4.4 Compatibility 2.1.2 √ 4.0 √ √ 4.2 4.1 AutroMaster/AutroMaster Compatibility Matrix √ = full compatibility o = partial/backwards compatibility AutroMaster Versions 3.1 √ √ 4.1.1.0 3.1.3. Rev.0 √ √ √ 3.0 4.1.0 4.3.5.1.3.0 √ 4.System Overview 2.2 AutroMaster/AutroSafe Compatibility Matrix √ = full compatibility o = partial/backwards compatibility AutroMaster Versions <= 3.3.2 3.1.0 √ √ 4.3 4.1.0 4.2.0 4.0 AutroSafe 3.3.0 √ 4.2 √ √ 4.4.0.2. 2011-11-25.1 4.8.0 √ √ 4.0 3.3.1 3.6.4.1.0 √ 4. Autronica Fire and Security AS Page 10 .1.1 √ 3.1 3.5.1.0.1.1 4.0 3.0 2.1.0 √ 3.7.4.2.1.0 √ 4.3.1 √ √ 3.1.1 √ √ √ o o o √ o o o o o √ o o o o o √ o o o o o √ o o o o o √ √ o o o o √ √ √ √ √ o √ √ √ √ √ √ AutroMaster System Description. 2 R 3.System Overview 2.1.3.3 AutroMaster/Autroprime Compatibility Matrix √ = full compatibility o = partial/backwards compatibility Autroprime =>1.1.1 4.2 and 9) does not support modern hardware/computers.0 R √ √ R √ √ AutroMaster R = Recommended configuration √ = Possible configuration Older Linux versions (Red Hat v.1.5 √ √ 5.2 5.1.1 3.3.4 AutroMaster/ Linux Compatibility Matrix Red Hat Versions 7.1.1. A. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB.0.0 √ Versions 3.0 4.4.0 4.7 4.3.3.1. Rev.4.0.3 4.1.3 4.7 2.2.1.4 √ √ 5.2 4.7 6. 7. System Description.1 5.0 4.0 4.2 4.6 4.. Autronica Fire and Security AS Page 11 AutroMaster . 2011-11-25.8 √ √ R √ √ √ √ R √ √ √ √ R √ √ √ √ R √ √ CentOS 5.1.2.3 √ √ √ √ √ √ √ √ 5.4 4.0 4.6 5.0 9 R R √ √ √ 4.0 4.3 4.0 4.1 4.1.1.1 R 3. 7.2 √ √ √ √ 4.0 5.1 7.0 2.0 4. 3.System Overview 2. Rev. Mobaline IF 482 and the simple format HH:MM:SS GPS synchronization using NTP 2.4. System Description.4.20 Dardo2 panel DardoPlus panel VDR over NMEA 0183 SAIA PLC Siemens S7 PLC ESPA 4.6 Incompatibility with Earlier Versions of AutroMaster 5000 AutroMaster ISEMS version 4.4. A.4 ESPA GSM Subset of ModBus RTU and ModBus TCP/IP Hernis CCTV System-S: RE-4 and RK-10 Masterclock NMEA 0183. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB.1 is compatible with the following systems:              BS-100 version 3. Autronica Fire and Security AS Page 12 .0 is not compatible with any earlier versions of AutroMaster 5000. 2011-11-25.5 Compatibility with Peripheral Systems AutroMaster ISEMS version 4.3. the selection of points (detectors. Rev. Autronica Fire and Security AS Page 13 . panes. AutroBrowser.The Presentation Window 3. The Presentation Window 3. The graphical interface. System Description. 3. menu handling. buttons. manual call points. is used throughout this chapter.1 Graphical Interfaces AutroBrowser (introduced with AutroMaster ISEMS) Standard graphical user interface AutroMaster ISEMS provides the following two graphical interfaces:   Standard graphical user interface (default) AutroBrowser (introduced with AutroMaster ISEMS) The graphical interfaces comprise display views. 2011-11-25.). etc.4) cannot be moved or resized.2 Customizing the Layout The layout can be customized in respect to:  the position of each pane  the size of each pane  whether a pane is visible or hidden Note that the Detail Pane (chapter 3. the change of mimics. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. navigation techniques. unless indicated elsewise. system operating techniques. A. 2011-11-25.3 Elements in the Presentation Window The different elements are described in the following chapters. Rev. Default Utility buttons Configurable Buttons (layer control) Dropdown Buttons (tags) Layer Control Pane Mimic Control Pane Static Navigation Pane Electronic Plotting Table Actors/Objects Pane Detail Pane Mimic Name Dynamic Navigation Pane Status Bar Information System Description. A. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. Autronica Fire and Security AS Page 14 .The Presentation Window 3. There can be one or several of these panes. i. 3.5 Static Navigation Pane The Static Navigation Panel displays the entire mimic area and is always visible. A.4 Detail Pane The Detail Pane is the focused area. Rev. 2011-11-25. A small movable navigation box inside the pane is used to choose a focused area in the Detail Pane.The Presentation Window 3. It contains the customer-specific data and site mimic (normally maximized).e. Autronica Fire and Security AS Page 15 . AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. System Description. the area chosen in the Static Navigation Pane. The colour of a mimic box will change to a different colour if a fault.The Presentation Window 3. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. A. Rev.7 Mimic Control Pane The Mimic Control Pane (browser) shows all available mimics (both static and dynamic mimics). Autronica Fire and Security AS Page 16 . 2011-11-25. 3. System Description.6 Dynamic Navigation Pane The Dynamic Navigation Pane displays the mimic that is selected in the Mimic Control Pane.  fault: yellow  prewarning: orange  alarm: red The box will also flash (accompanied by a audio signal) if a prewarning or an alarm situation occurs. a prewarning or an alarm situation occurs. 3. The More Text Pane displays additional information for a selected tag (if configured). AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. temperature 20oC).8 Layer Control Pane The Layer Control Pane shows the available layers (configurable).The Presentation Window 3. and each status of a tag can be given a unique text. providing information on status and analogue values (for example. A.10 Status Bar (configurable) Tags can be displayed in the status bar. Each layer is also represented by a button (see Configurable Buttons).9 More Text Pane During configuration. Rev. System Description. 2011-11-25. Autronica Fire and Security AS Page 17 . 3. additional text can be added to a tag. The following definition of the colours and symbols that are used in the system is always available to operators by clicking the symbol mimic in the Mimic Control Pane (in this example named Legend). System Description. colours display important information about what is actually happening in the alarmed area. all preconfigured actors and objects used for the Electronic Plotting Table are displayed. A.The Presentation Window 3. Each actor/object has its own symbol.11 Symbols and Colours AutroMaster ISEMS uses colour to indicate dynamic status. In the EPT Actors/Objects Pane. 2011-11-25. Autronica Fire and Security AS Page 18 . AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. Rev. A.The Presentation Window Colours are used in the following way in the event of an alarm situation: System Description. 2011-11-25. Rev. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. Autronica Fire and Security AS Page 19 . Rev. then move up/down or use the mouse Mouse Mode Zoom Shortkey Z Operate the mouse: Left-click and hold down the mouse button. then move the mouse in any direction to select objects in an area inside a frame Mouse Mode Pan Shortkey P Operate the mouse: Left-click and hold down the mouse button. 2011-11-25. A.12. then move up/down or use the mouse wheel Mouse Mode Multiselect Shortkey M Operate the mouse: Left-click and hold down the mouse button. Network Received Indicator (red/yellow/green) The colour indicates the quality of what is shown on screen / transmission speed Menu Turns on /off the menu of a selected tag when a tag is selected. Autronica Fire and Security AS Page 20 . AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. then move in any direction or use the mouse wheel System Description.The Presentation Window 3.1 Default Utility Buttons The overview below shows the default utility buttons. Mouse Mode Normal (navigation/select) Shortkey N Zoom reset Shortkey Esc Zoom Out Shortkey F2 Zoom In Shortkey F1 Mouse Mode Brightness (Day/Night mode) Shortkey B Operate the mouse: Left-click and hold down the mouse button.12 Buttons 3. The Presentation Window 3.12. several configurable buttons can be added. The total number of configurable buttons depends on the complexity of the system. The dropdown menus in this example are shown below. for example. buttons giving easy access to important tags in the system. Layer Control Buttons used to hide a layer or make a layer visible The same layers are listed in the Layer Control Pane (shown below) Global Command Buttons (examples) with dropdown menus. A. buttons used to turn on/off information layers (hide or make visible). Autronica Fire and Security AS Page 21 . 2011-11-25.2 Configurable Buttons In addition to the default utility buttons. The example below shows 9 buttons for layer control and 3 global command buttons with dropdown menus. Rev. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. Layer Control . etc. System Description. drawing the operator’s attention to the display. and the smoke is beginning to spread into the rest of the complex.The Presentation Window 3. A. Colour intensity has increased. Smoke is spreading to adjacent rooms. allowing appropriate action to be taken. indicating that smoke density has increased. AutroMaster ISEMS emits an alert sound. Colour intensity indicates smoke density. at the same time. the orange circle around the point indicates that the detector is in pre-alarm.fighting measures should now have been taken. The two adjacent rooms are now in pre-alarm status.Fire. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. System Description. indicated by the red circle around the point. 2011-11-25. Smoke intensity has increased and the point in the central room now has full alarm status. Rev. Autronica Fire and Security AS Page 22 .13 Indication of Status and Development of an Incipient Fire The example below (standard graphical user interface) shows how the development of a fire is indicated in the display. 2 Control of Fire-Safety Equipment Description: AutroMaster ISEMS supports a wide range of devices. Dardo emergency lighting and sprinkler systems etc. Autronica Fire and Security AS Page 23 . Use: AutroMaster ISEMS allows operator to disable/enable system units. including all AutroSafe panels and loop units. 2011-11-25. System Description.System Functions 4. A.3 Security-Clearance Level and User Identification Description: AutroMaster ISEMS can be configured to require user identification from the user before access is given to the different security-clearance levels Use: Eliminates the possibility that non-authorized personnel can affect the system. test Dardo emergency lightning. It also provides control of fire-safety equipment and related installations Use: AutroMaster ISEMS provides information about hazards/changes in the alarmed area on screen. ensuring that any abnormal occurrence is brought to the attention of the system operator 4. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. open/close fire doors. BS-100 fire-alarm systems. 4. Rev. PLCs.1 Presentation of Secured/Alarmed Areas Description: AutroMaster ISEMS provides a full-colour presentation of the secured/alarmed areas in the form of a custom-made map providing an instantaneous and up-to-date overview of relevant information from installed fire-safety equipment. etc. System Functions 4. System Functions 4. Autronica Fire and Security AS Page 24 . AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB.. which may be relevant in an emergency Layer Control Pane Layer Control Buttons (configurable) System Description. These layers can be toggled on/off in order to simplify overviews and present only necessary information at any given time Use: Information layers allow operators to toggle information such as such as power/water supply networks.4 Information Layers Description: AutroMaster ISEMS provides customer-specific information for the alarmed area. 2011-11-25. Rev. etc. sprinkler systems and fire doors. A. System Functions 4. Rev.) with backed-up configurations  Micellaneous  Generates a report without any parameters regarding alarms System Description. configuration information and fault/alarm information. The report generator provides the operator with a simple method of creating a cost-effective system log for maintenance and documentation purposes The following options are available for report creation:  History Reports of events from the system and connected subsystems (alarms.5 Report Generator Description: AutroMaster ISEMS allows users to create reports and logs of various properties and information from the system Use: Operators can create historical logs for the system and/or individual units between specified dates. configuration data. etc. disablement data. etc. 2011-11-25. A. Autronica Fire and Security AS Page 25 . analogue values read from detectors.) during specified periods of time  Analogue Values Reports measured values from detectors  Disablements Reports on all currently disabled groups or a given group  Configurations Reports a comparison of the current configuration implemented in AutroMaster ISEMS with a backed-up configuration  Versions Reports comparisons of the present configured options (symbols. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. disablements. faults. functions. 2011-11-25. Rev.     The history window contains one curve graph and three bar graphs. The horizontal axis is the time scale with a resolution (in this example) of 15 minutes. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB.System/Point Description: AutroMaster ISEMS provides users with information about system units in terms of recorded values and events. A. System Description. Autronica Fire and Security AS Page 26 .System Functions 4.6 History . The curve graph represents the detector's analogue value (sensitivity). showing development over time Use: Helps to indicate problems and isolate faults/sources of (unwanted) alarms Colour codes (the default colour codes are shown – other colours may be specified) Status Normal Alarm Alarm acknowledge Disabled Prewarning Prewarning acknowledged Fault Fault acknowledged Colour code Green Red Red Grey Orange Orange Yellow Yellow The screenshot shows the history of detector A0001 in connection with an alarm situation. The green bar shows the normal statuses of the detector. The red bar shows the detector's alarm statuses. 8 Programmable Logic Controllers (PLC) Integration Description: AutroMaster ISEMS can be used as a control system for programmable logic controllers Use: Allows control of. In the event of a communication failure. System Description. using the standard ESPA 4. process systems. Rev.4. automatically send messages to pagers Use: AutroMaster ISEMS can be set up to automatically distribute alarm messages to pagers when predefined events occur in the system.4. fire doors.System Functions 4. etc. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. for example.4 protocol. A. the communication failure will be reported on both master and slave Use: Allows information and control to be disseminated throughout the alarmed area 4. water-mist system flow-valves. 4.9 ESPA 4. Autronica Fire and Security AS Page 27 .7 Master-Slave Configuration Description: AutroMaster ISEMS supports one master and up to 4 slaves that can be started up independently. 2011-11-25.4 Messaging Description: AutroMaster ISEMS can. the system will automatically try to re-establish communication. a digital output is activated.11 Watchdog Description: If a fault appears on the system.System Functions 4. Rev. 2011-11-25. at the same time ensuring that the on-duty operator is at the controls Transferring duty control between machine 1 and machine 2. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB.10 Duty Control Description: AutroMaster ISEMS allows duty to be transferred between networked AutroMaster ISEMSs Use: Allows users to delegate/accept/assume duty. the watchdog raises an alarm Use: Allows advanced failsafe warnings to be implemented. Autronica Fire and Security AS Page 28 . Engine Room Bridge On Duty Delegate duty to Bridge Off Duty Accept duty? Off Duty Yes No Delegation failed On Duty On Duty Off Duty 4. if a serious fault is encountered. allowing users to control the system from any given AutroMaster ISEMS. A. alerting safety operators to take necessary precautions System Description. Automated doors.12 Fire-Patrol Supervisor Description: The AutroMaster ISEMS Fire-patrol supervisor is a monitoring facility for fire patrols. The status of the door’s position is indicated (open. A. Doors can be controlled automatically. security officers must turn a key at pre-defined check-points. The number of inputs used in the configuration determines the amount of status information that can be shown. closing). closing). closed. To verify that all checkpoints are checked according to a pre-defined plan and time schedule. System Description. If unable to do so. opening. Autronica Fire and Security AS Page 29 . 2011-11-25. the user controls the state of the fire doors. Only the status of the door’s position is indicated (open. Fire doors can be configured in the following ways:    Doors controlled by the system. and in the event of an incident. opening. automatically according to certain pre-configured events and manually Use: AutroMaster ISEMS can be set up to control fire doors. Doors that operate automatically in reaction to pre-configured events. closing). closed. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. etc. opening. a local alarm will be activated Use: Ensures that fire-patrols are carried out according to schedule. Rev.13 Door Control Description: AutroMaster ISEMS can monitor and control fire doors. Doors not controlled by the system. The status of the door’s position is indicated (open. closed. watertight doors.System Functions 4. that this is checked out and logged 4. AutroMaster ISEMS also provides test and logging facilities for this equipment. and makes it easy to check the status of system components as well as manually test the system The Dardo2 emergency-lighting system is a system for automatic monitoring-and-control of emergency lighting. allowing users to remotely observe the alarmed area Use: When a door won’t close.14 Low-Location Lighting Description: AutroMaster ISEMS can monitor and control low-level lighting for escape routes. Connecting this system to AutroMaster ISEMS shows each luminaire as an icon in the mimic. AutroMaster ISEMS can turn the low-location lighting for escape routes on. Continuous tests ensure that the system is always errorfree. System Description. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. allowing troublefree maintenance and documentation 4.15 CCTV Description: AutroMaster ISEMS supports control switching for external closed-circuit television systems. or an alarm is raised in a given area. A. 2011-11-25.System Functions 4. allowing the operator to assess the problem visually 4. Rev.16 Emergency Lighting . making it simple to check the status of system components as well as manually test the system.Dardo Description: AutroMaster ISEMS supports the Dardo2 and DardoPlus emergency lighting systems providing automatic monitoring and control of emergency lighting Use: AutroMaster ISEMS shows each luminaire. AutroMaster ISEMS can automatically set the CCTV system to show the problem areas. Autronica Fire and Security AS Page 30 . Use: In case of fires and evacuation.  Makes maintenance easier  Speeds up error detection  Documents internal control routines  Tests the system manually or automatically System Diagram A RS-232/485 converter must be installed between the Dardo2 panel and the AutroMaster ISEMS workstation. Autronica Fire and Security AS Page 31 .17 Display Dimming Description: AutroMaster ISEMS supports display dimming for applications where light emissions are critical Use: Ensures that low-light emissions areas are kept dark 4. Detector Zones. 2011-11-25. disable all the detectors in one area 4. for example. Output Controls. Alarm bell outputs.System Functions RS-232/485 4.18 Detector Group Management Description: Detectors and other loop units may be grouped together so that a whole group can be controlled simultaneously instead of single detectors being controlled individually Use: The operator can group system units logically. Loop Sounders. detectors in the relevant area can be disabled for the duration of the work (manually or as part of a scheduled disablement for a given period of time). Groups Description: AutroMaster ISEMS allows users to disable/enable system units Use: Allows the system to be switched so that it does not report unwanted alarms if activities that potentially cause these are going on. Loops System Description. Rev. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. A. Alarm and Fault Output. for example. Important: Security clearance 2 (Operate) is necessary to disable/enable detectors. Point types that can be disabled: System BS100 AutroSafe Points which can be disabled Detectors Detectors.19 Disablement/Enablement of Detectors. In the case of welding. making it easy to. System Functions 4. Use: Live video from an external CCTV system can be shown on the AutroMaster monitor (configurable) Live video for the selected CCTV camera will be shown on the screen. A. Autronica Fire and Security AS Page 32 .20 Voyage Data Recorder (VDR) Output Description: AutroMaster ISEMS can send data to VDRs Use: Allows fire-alarm system events to be recorded 4. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. Rev. 2011-11-25. Requires CentOS 5 and more recent versions.21 Live Video Support Description: AutroMaster ISEMS features live video support. System Description. A. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. Autronica Fire and Security AS Page 33 . 2011-11-25. System Description. the integrated report generator will generate a report of how the incident was resolved. When an incident is closed. The checklists are organized as checkpoints with one or more action items that can be used to manage operations. Rev.System Functions 4.22 Decision Support System Description: AutroMaster ISEMS provides a decision support system for Cruise vessels Use: The incident manager gives operators access to customerspecified checklists. The figure below shows the incident manager when an incident is active. and these can be marked off as actions are completed. move and remove graphical objects in the mimic to indicate persons requiring assistance. hazardous materials. move and remove graphical objects in the mimic to indicate location and status of damage control teams. the Electronic Plotting Table allows you to:       add.System Functions 4. Actors Objects System Description. Autronica Fire and Security AS Page 34 . handle up to three incidents at a time All EPT activity will be logged using the Decision Support System’s Incident Manager. for example.23 Electronic Plotting Table Description: AutroMaster ISEMS features an Electronic Plotting Table (EPT). OOW. 2011-11-25. Use: In addition to showing an overview and the location of fire zones. Rev. A. move and remove graphical objects in the mimic to indicate known damage data and location add. extinguishing equipment and special areas within the Detail Pane. for smoke-divers to monitor time on air add. The EPT Actors and Objects Pane (example below) displays all available symbols. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. move and remove graphical objects in the mimic to indicate safety incidents add. etc. fire-fighting teams smoke-divers and other actors connect timers to actors/objects plotted in the EPT to monitor time in the mimic. stop. A. pause. Rev. 2011-11-25. and during replay the operator can start. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. Recordings are available for replay. The module can be configured to automatically start recordings on pre-configured events. Use: Offers a screenshot-based record and replay of incidents on AutroMaster. System Description. or manually by means of the Event Recorder button. Autronica Fire and Security AS Page 35 . or replay fast forward and fast backward.System Functions 4.24 Event Recording and Replay Description: AutroMaster ISEMS features Event Recording and Replay. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. 2011-11-25. A. the operator can observe incidents on the screen. Autronica Fire and Security AS Page 36 . Rev. Use: With a graphical tool accessible from the menu. an operator is able to simulate (manual or randomly selected) pre-configured scenarios that could take place on the AutroMaster. and manage them as if they where real incidents. System Description.25 Training and Simulation Description: AutroMaster ISEMS features a Training and Simulation Module. During simulation.System Functions 4. 27 Time Synchronization Description: AutroMaster ISEMS can synchronize its clock to a master clock. Autronica Fire and Security AS Page 37 . speeding up learning curves and response in emergencies System Description. Norwegian. 2011-11-25. Finnish. allowing the remaining AutroMaster ISEMSs to synchronize to this system. Portuguese. which provides synchronized logging and display across all AutroMaster ISEMSs 4. one AutroMaster ISEMS must be defined as master clock.28 Multi-Language Support Description: AutroMaster ISEMS is available in the following languages: Dutch. This is an important function for system logging Use: Allows AutroMaster ISEMSs in a network to operate with synchronized clocks. English. Rev. A.System Functions 4. Use: The Message Center module provides the following:  Audio messages  Text messages  Contacts  Calendar / Tasks 4. Danish. In a network configuration. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB.26 Message Center Description: AutroMaster ISEMS features a Message Center. Spanish and Swedish Use: Allows operators to use their own language. Instead of using the mouse. A. Use: Requires the use of touchscreen monitors. restoring and comparing backups of all mimics. Autronica Fire and Security AS Page 38 . for example if changes are made in the display system. USB memory stick and tape Use: Provides security and comparison functions for customerspecific parameters. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. it is possible to interact what is displayed within the area of the screen directly by using a finger. configuration and texts to floppy disk. Rev. or if system equipment is added 4. System Description.29 Backup Tools Description: AutroMaster ISEMS includes functions for creating. information.31 Touch Screen Functionality Description: AutroMaster ISEMS supports touchscreen functionality.30 Software Upgrade Tool Description: AutroMaster ISEMS includes a tool for upgrading the AutroMaster ISEMS software from CD Use: Makes it easy for users to upgrade AutroMaster ISEMS 4.System Functions 4. 2011-11-25. and vice versa (Give Control/Take Control). Rev. An AutroMaster (top-level Integrated Safety and Emergency Management System) is located on the bridge. connected to both the Primary and the Secondary System via AutroCom. To achieve a complete graphical overview and control of the total system. A. AutroMaster ISEMS can be used as a top-level system. and communicates with both the Primary and Secondary System via AutroCom.  Standby Mode: The AutroSafe system is in Standby Mode when it is ready to take over the control of the detection loops if the system in Active Mode fails. AutroSafe Dual Safety Concept 5.AutroSafe Dual Safety Concept 5. Only the AutroFieldBus crosses the boundary between the fire zones. and can easily see which system is in Active or Standby mode during normal operation (see definitions). The AutroMaster operator has a complete graphical view of the entire system.3 and more recent versions feature the AutroSafe Dual Safety concept. The purpose of the concept is to ensure that the Secondary System takes over the control of the detection loops if the Primary System is lost for any reason. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB.  Secondary System: The AutroSafe system that is designed to be in Standby mode during normal operation. The following definitions apply:  Primary System: The AutroSafe system that is designed to be in Active mode during normal operation.1 Overview AutroSafe version 4. Autronica Fire and Security AS Page 39 . System Description. The panels in the Secondary System are located in Fire Zone 2. 2011-11-25. and all equipment in the Primary System plus the Loop Drivers in the Secondary System are located in this fire zone. 5. If necessary. The detection loop covers an area of Fire Zone 1. the operator can manually transfer the control of detection loops from the Primary to the Secondary System. An AutroSafe system using the Dual Safety concept consists of a Primary System and a Secondary System.2 Example The figure on the next page illustrates an example of the system concept on a vessel where a Primary System and a Secondary System share a detection loop. The AutroFieldBus Protocol Converter BSD-321 is used to connect the Loop Drivers in the Primary System to the Secondary System. The AutroKeeper BN-180 monitors the detection loop and switches the loop control from the Primary to the Secondary System in case of a fault.  Active Mode: The AutroSafe system is in Active Mode when it control the detection loops. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB.AutroSafe Dual Safety Concept System Description. Rev. 2011-11-25. A. Autronica Fire and Security AS Page 40 . AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB.2 Connection to Standalone Panel or an AUTROLON Ring A twisted pair (cat 5 or better) cable is used to connect the network card in the PC to the network board (EAU-330/2) in the panel.AutroMaster ISEMS as an Integral Part of AutroSafe_3 6. Rev. A. Autronica Fire and Security AS Page 41 . Note that the twisted-pair cable is a cross-over cable and not a direct patch cable. providing control of fire-management and related systems. 6. System Description.1 Overview The AutroMaster ISEMS Presentation System forms an integral part of the AutroSafe 3 Interactive Fire Detection System. 2011-11-25. AutroMaster ISEMS as an Integral Part of AutroSafe_3 6. operation zones. To communicate with 2 or more AutroSafe rings. can be used between the different work stations in the AutroMaster ISEMS system. and monitors the entire system. A hub can also be used to amplify the signals in order to extend the range of the communication cable. The AUTROLON is connected to the workstations. A. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. Autronica Fire and Security AS Page 42 . The connection from the panels on each AUTROLON ring is made via twisted-pair or fibre-optic cables and a HUB. NOTE: AutroMaster ISEMS cannot communicate through AUTROLON. The operator panels can be installed in different buildings. depending on the system configuration. It is possible to operate the whole fire-alarm system from one or several work stations.AutroMaster ISEMS as an Integral Part of AutroSafe_3 6. AutroMaster ISEMS is used as the top level system. System Description.3 Applications in Larger AutroSafe Systems In applications with several AUTROLON Rings. LAN. AutroMaster ISEMS enables two-way communication with both AUTROLON rings. a network HUB must be used. 2011-11-25. A high-level bus based ethernet. Rev. etc. A. allowing these highly complex systems to be presented via AutroMaster ISEMS. 2011-11-25. AutroMaster ISEMS supports dual ethernet connections. Rev. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB.AutroMaster ISEMS as an Integral Part of AutroSafe_3 6. Autronica Fire and Security AS Page 43 .3. SAIA SAIA CCTV System Description.1 Dual Ethernet Configuration In applications where regulations require that fire-safety systems are split into independent zones. AutroMaster ISEMS as an Integral Part of AutroSafe_4 7.2 Connection to a Standalone Panel A twisted pair (cat 5 or better) cable is used to connect the network card in the PC to the panel.1 Overview The AutroMaster ISEMS Presentation System forms an integral part of the AutroSafe 4 Interactive Fire Detection System. Rev. Note that the twisted-pair cable is a crossover cable and not a direct patch cable. AutroMaster ISEMS as an Integral Part of AutroSafe_4 7. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. System Description. Autronica Fire and Security AS Page 44 . providing control of fire-management and related systems. A. 2011-11-25. 7. It is possible to operate the whole fire-alarm system from one or several work stations. A. AutroMaster ISEMS is used as the top level system. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. Autronica Fire and Security AS Page 45 . depending on the system configuration.AutroMaster ISEMS as an Integral Part of AutroSafe_4 7. Rev. and monitors the entire system. All AutroSafe 4 panels within a system are linked together using an internal Ethernet network. 2011-11-25. System Description. AutroMaster ISEMS enables two-way communication with both systems. The AutroSafe 4 system uses the same network to communicate with AutroMaster ISEMS (Integrated Safety and Emergency Management System).3 Applications with Several AutroSafe Systems In applications with several AutroSafe systems. allowing these highly complex systems to be presented via AutroMaster ISEMS. A. 2011-11-25.AutroMaster ISEMS as an Integral Part of AutroSafe_4 7. AutroMaster ISEMS supports dual ethernet connections.3. Rev. System Description. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB.1 Dual Ethernet Configuration In applications where regulations require that fire-safety systems are split into independent zones. Autronica Fire and Security AS Page 46 . 2011-11-25. AutroMaster ISEMS as an Integral Part of Autroprime 8.2 Connection to a Standalone Panel A twisted pair (cat 5 or better) cable is used to connect the network card in the PC to the panel. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB.AutroMaster ISEMS as an Integral Part of Autroprime 8. Rev. Autronica Fire and Security AS Page 47 . 8. System Description. A.1 Overview The AutroMaster ISEMS Presentation System forms an integral part of the Autroprime Interactive Fire Detection System. providing control of fire-management and related systems. Note that the twisted-pair cable is a crossover cable and not a direct patch cable. A.AutroMaster ISEMS as an Integral Part of Autroprime 8. Autroprime can be configured to both receive information from and transmit information to AutroMaster ISEMS.1 Communication with AutroMaster ISEMS Autroprime can be configured to act as a TCP/IP network node. allowing Autroprime to communicate with an AutroMaster Integrated Safety and Emergency Management System. The figure below shows AutroMaster connected to a Proxy server and several Autroprime systems. Rev.3. Autronica Fire and Security AS Page 48 .3 Autroprime as a TCP/IP Network Node 8. System Description. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. 2011-11-25. Rev. 9. 9.2 System Diagram RTZ-20 System Description.1 Overview The AutroMaster ISEMS presentation system forms an integral part of the BS-100 DYFI analogue-addressable fire-alarm system.Feil! Tallet kan ikke representeres i det angitte formatet. Autronica Fire and Security AS Page 49 . providing control of fire-management and related systems. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. AutroMaster ISEMS as an Integral Part of BS-100 9. A. 2011-11-25. . : 116-P-AMASTER-SYSTEM/XGB. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. A. No. Rev. A.Reader’s Comments . 2011-11-25 Your information on any inaccuracies or omissions (with page reference): Please turn the page System Description. 2011-11-25. Autronica Fire and Security AS . Rev. Reader’s Comments Please help us to improve the quality of our documentation by returning your comments on this manual: Title: System Description. AutroMaster ISEMS Ref. A. 2011-11-25. AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. Rev.Reader’s Comments Suggestions for improvements Thank you! We will investigate your comments promptly. Would you like a written reply? Name: Title: Company: Address:  Yes  No ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Telephone: Fax: Date: ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Please send this form to: Autronica Fire and Security AS N-7483 Trondheim Norway Tel: + 47 73 58 25 00 Fax: + 47 73 58 25 01 www.com System Description.autronicafire. Autronica Fire and Security AS . AutroMaster ISEMS 116-P-AMASTER-SYSTEM/XGB. Autronica Fire and Security AS . 2011-11-25. A. Rev.Reader’s Comments System Description. Fax: + 47 23 17 50 51 Division Oil & Gas. development. fax: + 47 73 58 25 01. computer sites and offshore installations. Our products are CE marked and developed for worldwide standards and regulations. All products are easily adaptable to a wide variety of applications. integrated fire and gas detection and alarm systems. manufacture.autronicafire. hospitals. one of the largest cities in Norway.Autronica Fire and Security AS is an international company. Autronica Fire and Security AS Headquarters. Norway. Trondheim. Quality Assurance Stringent control throughout Autronica Fire and Security ASsures the excellence of our products and services. Norway. Division Oil & Gas. environment and property. manufacturing and marketing of fire safety equipment. The company is owned by United Technologies Corporation and employs more than 319 persons with experience in developing. control and presentation systems. Head Office Oil & Gas. Suppression/New Build Detection & Alarm. headquartered in Trondheim. PO Box 416. Fax: +47-73 58 25 01 Visit Autronica Fire and Security AS's Web site: www. emergency light systems. UK. Fax: + 44 84 52 80 20 55 Division Maritime. Norway. Phone: + 47 73 58 25 00. oil and gas instrumentation systems for monitoring and control. Farnborough GU14 4AT. plus petrochemical. Phone: + 47 51 84 09 00. integrated fire and gas detection systems. fax: + 47 51 84 09 99. Phone: + 47 23 17 50 50. Our quality system conforms to the Quality System Standard NS-EN ISO 9001:2000 and is valid for the following product and service ranges: marketing. The company's strategy and philosophy is plainly manifested in the business idea: Protecting life. Our products cover a broad range of systems for integrated solutions. public address systems.com . plus suppression systems. After Sales/Service Detection & Alarm. as well as to heavy industry and high-risk applications such as power plants. installation. among others. Fax: + 47 31 29 55 01 Division Maritime. engineering. Phone: +47-73 58 25 00. and conform to the CEN regulation EN54. airports. Phone: + 47 51 84 09 00. voice alarm systems. Stavanger. sales. commissioning and servicing of suppression. including fire detection systems. Oslo. world wide. Norway. Phone: + 47 31 29 55 00. Norway. churches and schools.