Metastream® ATEX I-ATEX EN EEC Directives – Page 1 of 3 94/9/EC (ATEX95/100a) & 2006/42/EC (Machinery Directive) This section refers to couplings which bear the CE and ATEX* required markings: CE / ATEX marking All couplings which comply with CE and ATEX legislation will be marked as shown. This will be etched on the spacer element of the transmission unit. IM2 II 2GD T6 M17 1SS, UK. 07 εx εx Note 07 is the year of manufacture and will change. • Operation in aggressive atmospheres The following components contain non-metallic materials. Confirm compatibility or provide suitable protection if the coupling is to operate in an aggressive atmosphere. - - - The hub electrical insulation. (if supplied option) - reinforced thermosetting plastic. Limited end float bearings. (if supplied option) – PTFE based plastic. Composite spacer tube. (if supplied option) – reinforced thermosetting plastic. Temperature classification of Metastream couplings Metastream metal membrane couplings from J ohn Crane supplied in conformance with Directive 94/9/EC have to the following classification when used in accordance with instructions and information supplied. For Standard ambient temperature –20 to 40 o C Metastream T series and L series couplings, using the disk type flexible elements, are covered by type certificate Sira 02ATEX9403 Metastream M series couplings, using the diaphragm type flexible elements, are covered by type certificate Sira 02ATEX9404 Where Metastream metal membrane couplings from J ohn Crane are required for use in higher ambient temperatures, J ohn Crane Ltd certifies that the equipment complies with the temperature classification range listed in table 1 and in all other respects complies with the type certificates. I M2 II 2GD T# (amb. *C) Table 1. Max ambient o C T Class # Max. Surface temperature o C 150 T3 200 90 T4 135 55 T5 100 40 T6 85 Metastream ® ATEX I-ATEX EN EEC Directives – 94/9/EC (ATEX95/100a) & 2006/42/EC (Machinery Directive) Page 2 of 3 Declaration of Conformity EEC Directive 94/9/EC of 23 03.1994 and resultant legislation and standards We, the manufacturers – J ohn Crane UK Ltd, – confirm that the explosion-prevention requirements have been implemented for Metastream ® metal-membrane couplings Equipment complies with the requirements of directive 94/9/EC. It is in accordance with article 1 3. (a) of the directive and the fundamental Health and Safety requirements of Annex II, are fulfilled. The current Type-Examination certificates for the couplings are:- ‘T’ & ‘L’ series - Sira 02ATEX9403 ‘M’ series - Sira 02ATEX9404 The technical Documentation is deposited with the designated Notified body in accordance with article 8 1. (b) (ii) the Directive 94/9/EC: SIRA Test & Certification Ltd Hazardous Area Centre, Rake Lane Eccleston, Chester, CH4 9J N England P.D. Carlisle (Product Line Director - Couplings) Signed: Date: 1 st J anuary 2010 John Crane 31, Nash Road Trafford Park Manchester M17 1SS United Kingdom T: +44 (0) 161 872 2484 F: +44 (0) 161 872 1654 www.johncrane.com I-ATEX EN Metastream ® ATEX EEC Directives – 94/9/EC (ATEX95/100a) & 2006/42/EC (Machinery Directive) Page 3 of 3 Declaration of Incorporation E.C. Machinery Directive (2006/42/EC) Section 1.0 - Machinery Description: Flexible Power Transmission Ring and Diaphragm Form Membrane Couplings Types: M, H, T, L Series Section 2.0 - Applicable Harmonised Standards ISO13709 (API 610) for centrifugal pumps ISO14691 couplings for - General-purpose applications ISO10441 (API 671) (opt) couplings for - Special-purpose applications Section 3.0 - Declaration: We, J ohn Crane declare that under our sole responsibility for the supply of the machinery defined in Section 1.0 above, the said machinery parts are intended to be incorporated into other machinery or assembled with other machinery to constitute machinery as covered by this Directive. The machinery parts, covered by this declaration must not be put into service until the machinery into which it is to be incorporated has been declared in conformity with the provisions of the Directive. Signed: Date: 3rd Sept 2009 P. D. Carlisle (Product Line Director – Couplings) John Crane 31, Nash Road Trafford Park Manchester M17 1SS United Kingdom T: +44 (0) 161 872 2484 F: +44 (0) 161 872 1654 www.johncrane.com