AN5516-06 Optical Line Terminal Equipment GUI Reference

AN5516-06Optical Line Terminal Equipment GUI Reference Version: A Code: MN000000819 FiberHome Telecommunication Technologies Co., Ltd. May 2011 Thank you for choosing our products. We appreciate your business. Your satisfaction is our goal. We will provide you with comprehensive technical support and after-sales service. Please contact your local sales representative, service representative or distributor for any help needed at the contact information shown below. Fiberhome Telecommunication Technologies Co., Ltd. Address: No. 5 Dongxin Rd., Hongshan Dist., Wuhan, China Zip code: 430073 Tel: +86 27 8769 1549 Fax: +86 27 8769 1755 Website: http://www.fiberhomegroup.com Legal Notice           TM TM are trademarks of FiberHome Telecommunication Technologies Co., Ltd. (Hereinafter referred to as FiberHome) All brand names and product names used in this document are used for identification purposes only and are trademarks or registered trademarks of their respective holders. All rights reserved No part of this document (including the electronic version) may be reproduced or transmitted in any form or by any means without prior written permission from FiberHome. Information in this document is subject to change without notice. Preface Related Documentation Document Description AN5516-06 Optical Line Introduces the retrieval method, contents, releasing, Terminal Equipment reading approach, and suggestion feedback method for the Documentation Guide complete manual set for the AN5516-06. Introduces the AN5516-06's network location, functional AN5516-06 Optical Line Terminal Equipment Product Description features, hardware structure, FTTx application model, equipment configuration, network management system and technical specifications. It is the foundation of the complete manual set. The other manuals extend and enrich the concepts introduced in the Product Description. Introduces the key features supported by the AN5516-06, AN5516-06 Optical Line Terminal Equipment Feature Description including GPON / EPON access, GPON / EPON terminal management, VLAN, broadcast, voice and safety; and introduces these functions in details in terms of definition, characteristic, specification, principle description, references and so on. AN5516-06 Optical Line Terminal Equipment Hardware Description Introduces the appearance, structure, functions, technical specifications, and usage method for the AN5516-06’s cabinet, PDP, subrack, cards, cables and wires, facilitating users’ mastery of the hardware features of the equipment. Introduces the overall installation and verifying procedure AN5516-06 Optical Line from unpacking inspection to power-on examination after Terminal Equipment Installation the equipment is delivered on site, and provides reference Guide information (e.g. safety principles and wiring scheme of a variety of interfaces) to guide users to install the equipment. Introduces the method for configuring the EPON services supported by the equipment via ANM2000 Network AN5516-06 Optical Line Management System, such as basic configuration, voice Terminal Equipment EPON service configuration, data service configuration, multicast Configuration Guide service configuration, and software upgrading configuration, to guide users on start-up for various services and software upgrading. I Document Description Introduces the shortcut menu for every card of the AN5516-06 Optical Line Terminal Equipment GUI Reference AN5516-06 inside ANM2000 Network Management System, including the function, parameter explanation, precautions and configuration example of every command in the shortcut menu of each card, to help users master the operation of the AN5516-06 inside ANM2000. Introduces the operation procedures of replacing the AN5516-06 Optical Line AN5516-06’s components, including preparations, Terminal Equipment Component precautions, early operations, operation process and Replacement subsequent operations, so as to guide users with the completion of component replacement on the hardware. AN5516-06 Optical Line Introduces routine maintenance operations of the Terminal Equipment Routine AN5516-06, including remote maintenance and on-site Maintenance maintenance. AN5516-06 Optical Line Terminal Alarm and Event Reference Introduces the AN5516-06’s alarm information and event reference, including alarm / event names, alarm / event levels, possible reasons, effects on the system, and processing procedure. Introduces the fault processing principles and methods of AN5516-06 Optical Line Terminal Equipment Troubleshooting Guide fault diagnosis and locating for the AN5516-06. Also discusses the typical fault cases of various services. If the trouble is too complicated to process, users can refer to FiberHome for technical support according to the instructions in this document. II AN5516-06 Optical Line Introduces the AN5516-06 installation and cable connection Terminal Equipment Quick and layout using diagrams to guide a quick installation for Installation Guide users. Version Version Description This manual corresponds to the EPON 1.0 version of the A AN5516-06. It is the initial version. Intended Readers This manual is intended for the following readers:  Commissioning engineers  Operation and maintenance engineers To utilize this manual, these prerequisite skills are necessary:  Access network technology  EPON principles  Ethernet switch technology  Computer network technology  Basic operation methods of the ANM2000 III Conventions Terminology Conventions Terminology Convention AN5516-06 FiberHome AN5516-06 Optical Line Terminal Equipment FiberHome e-Fim ANM2000 Broadband Access Network ANM2000 Management System EC4B 4×EPON-C Interface Card (type B) EC8B 8×EPON-C Interface Card (type B) GC4B 4×GPON-B Interface Card (type B) GC8B 8×GPON-C Interface Card (type B) C155A 1×STM-1 Optical Interface Card (CES Mode) CE1B 32×E1 Optical Interface Card (CES mode) (type B) PUBA Public Card (type A) HSWA Core Switch Card (EPON) (card number: 2.115.334) HU1A 4×GE +1×10GE Optical Interface Uplink Card HU2A 2×GE +2×10GE Optical Interface Uplink Card GU6F 6×GE Optical Interface Uplink Card CIO Common Interface Card PWR Power Supply Card FAN Fan Control Card Symbol Conventions Symbol Convention Description Note Important features or operation guide. Caution Warning IV Possible injury to persons or systems, or cause traffic interruption or loss. May cause severe bodily injuries. Operation Safety Rules The network management computer should be placed away from direct sunlight, electromagnetic interference, heat source, humidity and dust, and with at least 8 cm distance from other objects in order to keep good ventilation. Use UPS power supply to avoid loss of network management data caused by accidental power failure. The computer case, UPS power supply and switch (or hub) should be connected to protection earth ground. To shut down the network management computer, first exit the operation system normally and then shut off the power supply. Do not exit the network management system when it is working normally. Exiting the network management system does not interrupt traffic in the network, but precludes centralized control of the networked equipment. The network management computer cannot be used for purposes other than network management. Use of unidentified memory devices should be prohibited so as to avoid computer viruses. Do not delete any file in the network management system randomly or copy any irrelevant file into the network management computer. V computer name or LAN settings.Do not visit Internet via the network management computer. Doing so may result in abnormal operation of network management system. Do not modify the network management computer’s protocol settings. VI . WS/OS No access to Internet ! Figure 1 No access to Internet Do not perform service configuration or expansion during service busy hours via the network management system. Doing so may increase data flow in the net card and hence affects normal network management data transmission or results in other accidents. No modification ! Figure 2 Do not modify protocol settings (1) VII . No modification ! Figure 3 VIII Do not modify protocol settings (2) . No modification ! Figure 4 Do not modify computer name IX . No modification ! Figure 5 X Do not modify LAN settings . ...................... 1-1  1............................11  Displaying ONU Subscribers......... 2-1  2....2  Viewing Topology ...................................... III  Intended Readers .......5  Querying Alarm History ................................ 1-16  1........................................................3  Pinging ..................................................................................... III  Conventions .......8  Deleting an Object ........................................................... V  1  2  Common Command .....................................2  Querying Instant Performance ...................................................................... 1-13  1...................6....... 1-7  1.........................Contents Preface ..............................................10  Refreshing an ONU ...............................................3  Querying Uplink Port Performance Statistical Value .........................3  Querying Performance History .................................................................................................4  Querying Current Alarms..................................12  Hiding ONU Port Panel .................................1  Querying CPU / Memory Utilization Ratio ...6............................. 1-23  1..................................6....... I  Version .........................................................6  Querying Real Time Performance ......................... 1-25  GUI Reference of a System ....................7  Resetting a Card ................................... IV  Operation Safety Rules .................................................. 1-19  1....................................................2  Querying PON Port Performance Statistical Value ........... 2-4  2.......6......................... 1-18  1................... 2-3  2.................... 1-5  1........... 1-17  1.................................................................................... 1-14  1................................................4  Querying Uplink / Downlink Rate......... 1-11  1.1  Querying Status ................................ 1-24  1............................... I  Related Documentation.............................................................................................................................................. 1-9  1.......................... 2-2  2............9  Querying and Modifying Properties ............................................... 1-13  1........ 1-15  1.................................................................................................. 2-5  .................. 1-2  1.............................................4  Telnetting............................1  Adding a Module .................. .................... 2-25  2.......2  Defining a Threshold Configuration Profile ...... 2-16  2...............................................................8  Performing Synchronization Operation ................9...... 2-9  Defining a Profile.......... 3-3  3.....................1  Defining an ONU Port Rate Control Profile .........10..........5  Time Calibration ......................................1  Managing User Defined Alarms. 3-9  .....1  3.............2  Performing ONU Authentication ..................4  Setting Logical Identifier Whitelist of an ONU .........1  Configuring Authentication Mode of a PON Port .....4  Configuring an ONU Voice Port...... 3-3  3............5  Defining a SVLAN Profile ....... 2-29  2...................4  Defining a Service Model Profile .....10...............10.......................... 2-37  2.......................................9.......9............... 2-9  2. 2-10  2...............................10..............1........ 3-6  3....11................11............................ 2-40  GUI Reference of the HSWA Card ....6  Detecting Physical Configuration ......................................3  Configuring ONU Voice Basic Items....6  Defining a Softswitch Platform Interconnection Parameter Profile ..10...................................................................... 2-17  2................................ 2-37  2................... 2-23  2..................2.................................. 2-6  2.................9..... 2-27  2... 2-35  2.. 2-14  2.........6  Activating an ONU Voice Port .....................................................3  Defining a Bandwidth Profile ..............7  Authorizing Cards ............... 2-8  2.....................................................1  2........ 3-1  3.... 2-10  2............................1......................................... 2-32  2...9  Manually Synchronizing ONUs......3  Setting Password Whitelist of an ONU .. 2-12  2...... 2-37  2.7  Defining an ONU Voice Port Advanced Configuration Profile ......9...3  Binding an Object with a Profile ..... 3-4  3.........................................................................................................................11  3  Batch Configuration .......... 2-35  Managing Alarms ..10..... 2-25  2...........2  Defining an ONU Data Port Property Profile .....10  2.8.....9............................................ 2-11  2.............. 3-7  Configuring a Service VLAN ...........2  Setting Physical Identifier Whitelist of an ONU.................... 2-7  2....9.5  Configuring an ONU .......................11...........................................1  Configuring an ONU Data Port ..........1..........2  Configuring ONU Data Service ......1.............. ...... 3-49  3............... 3-39  3....... 3-13  3.....2  Configuring a Multicast Profile............ 3-47  3...............................5... 3-11  3..............5......12  Viewing MGC / Register Server Status..... 3-21  3.......7  Binding an IAD Softswitch Interconnection Profile ....6  Configuring a Multicast Cascade Port ........5........... 3-28  3...................................10  Configuring Dynamic Multicast VLAN Mode ....5...9  Configuring a Multicast VLAN .. 3-33  Configuring Multicast Service....13  Viewing NGN Subscriber Port Status .....6............................6.. 3-23  3........6  Configuring NGN Register Parameters .............................................5  Configuring Multicast Protocol Parameters ............1  Configuring a Local VLAN ........6................5....................... 3-9  3............................. 3-26  3.......................13  Configuring Default Preview Parameters ...6.....................5.....................................................................3  Configuring VLAN Properties ....5..................11  Configuring a Multicast Proxy IP Address .......................5..........12  Prejoining a Certain Multicast Group ........ 3-37  3...............5...............5.. 3-44  3.... 3-20  3.......5............................5  Configuring Voice Service ....6..10  Activating a NGN Voice Port Automatically ....1  Configuring a NGN Uplink Port .........6...........9  Configuring Digitmap ............................. 3-35  3............... 3-35  3.......6... 3-25  3.....5.......... 3-50  ................4  Adding a Port to a VLAN ..... 3-44  3.11  Registering / Logging Out a NGN Subscriber..........4  Configuring Port Parameters ...3.. 3-30  3... 3-15  3..... 3-31  3............6...........6.......................6.... 3-29  3........... 3-45  3...........14  Viewing IAD IP Address ..............6.................. 3-15  3..............2......................1  Selecting Multicast Version ..........3  Configuring NGN Uplink Subscriber Data .. 3-32  3..............6  3..............6..... 3-35  3...................... 3-48  3................... 3-42  3..5..8  Configuring IAD MD5 ...............8  Configuring Multicast Mode .........5......7  Configuring Uplink Port Maximum Multicast Bandwidth ...............6.........................4  Configuring NGN Uplink DHCP .................................. 3-29  3.......... 3-47  3.......3  Configuring Group Parameters ...............5  Configuring NGN Heartbeat Parameters ...........2  Configuring NGN Uplink PPPoE .. 3-27  3................ 16  Configure ONU Parameters ..6.5  Configuring a Service Profile .........6..1  Configuring a GPON Service Bandwidth Profile..................................... 3-68  3.. 3-52  3......8.6.27  Viewing Multicast Group Statistics Information..9........................................... 3-60  3................................... 3-89  3........15  Configuring Multicast Log Automatic Report ...................23  Viewing Uplink Port Information ...... 3-65  3.....................7........................6...........19  Refreshing Multicast Configuration Information...................7...........6.........25  Viewing ONU Multicast Address Table ...... 3-62  3....................................7.3  Configuring a Multicast Service Profile .......18  Forcing Subscribers to Leave.....4  Configuring a Voice Service Profile ......6................... 3-51  3...6..............9  Configuring a Profile ..............2  Configuring an OLT QinQ Domain .......3  Configuring a GPON OLT VLAN Operation Table ............................. 3-62  3..6..............6  Binding a Service Profile .8.... 3-57  3...... 3-58  3.................. 3-59  3.....9.28  Viewing ONU Port Statistics Information .... 3-84  3.....6............ 3-72  3..............20  Clearing Log .....................21  Viewing Online Multicast Group Information ...... 3-70  3.................. 3-73  3. 3-63  3.... 3-86  Configuring QinQ .......6............... 3-54  3.......6........ 3-56  3....7.........6....6..............8.............. 3-91  3........................................... 3-95  Configuring QoS .26  Viewing PON Interface Card Multicast Address Table 3-64  3............... 3-81  3..............8  3.................................30  Querying ONU Fast Leave Capability ..........22  Viewing Online Group Information of an ONU Port .........31  Querying Core Switch Card Multicast Source Address Table ..........1  Configuring a QoS Profile ........6...... 3-89  3................................................. 3-59  3........ 3-97  3..7.................. 3-103  ............. 3-66  3..6...29  Viewing Log Information ........7........14  Configuring Log Time ....3.......2  Binding / Unbinding a QoS Profile with a Slot ................6....................1  Configuring a QinQ Profile ...............7  3..................6....6........ 3-72  3..................17  Multicast Log FTP Report...............................2  Configuring a Data Service Profile ......... 3-69  3......24  Viewing Core Switch Card Multicast Address Table ....................... 3-97  3... 3-78  3...... .. 3-119  3.5  PON Port Protection Group Ranging ........... 3-136  3............. 3-105  3... 3-128  3... 3-138  3.....................................14.3  Binding / Unbinding a QoS Profile with an Uplink Port ...3  Refreshing a DBA Profile .. 3-117  Configuring DHCP .......... 3-119  3.... 3-112  3.10. 3-140  ....3...........................1  Enabling DHCP Snooping Function ......9........1  Configuring a DBA Configuration Profile ..13  Configuring Clock Mode ..........12.................................14...............12..................................3  Aggregation Setting..5  Viewing LACP Port Information .......6  Configuring Traffic Policy..... 3-133  3............................6  Viewing PON Port Protection Group Operating Status ................... 3-132  3.13..9.............................. 3-126  Configuring PON Port Protection ................2  Configuring a SLA Configuration Profile ..............................12  3.................. 3-104  3. 3-135  3............. 3-134  3.......11..............4  Configuring / Querying Priority Mode .....................1  Setting a PON Port Protection Group .........................2  Configuring PON Port Protection Group Mode............3  Managing Line Identifier ................ 3-129  3.............9.. 3-126  3.13..............................10..14...................11..................... 3-119  3.....................4  PON Port Protection Group Forced Switching ..14  Managing Uplink Function....................... 3-139  3............... 3-128  3.....10......................................................................2  Setting LACP..................................13.....13......................2  3..... 3-131  3..........3  Configuring a Hand-in-Hand PON Port Protection Group .............................. 3-122  Configuring Clock .........14.13................................................... 3-108  Managing a DBA Profile ...................10  3........................11  3................................2  Configuring a DHCP Snooping Trusted Port ....14....11....... 3-126  3.................9.................................................. 3-113  3......................13...........1  Configuring Trunking Link Aggregation ....4  Setting LACP Port Parameters.......................... 3-135  3..4  Configuring Line Identifier Format . 3-112  3......................11........................5  Configuring Flow Classification Rule ............................................... 3-120  3.............................. 3-107  3...........1  Selecting System Synchronization Reference Source ............... ......10  Querying Dual Uplink Protection Status ...........14...18...3  Configuring ONU MAC Address Aging Time ....17.................19  Enabling Anti-DOS Attack Function ....................1  3.6  Configuring Port Mirroring ......................14...17  3...........................................................................8  Configuring Uplink Card Protection ...............1  Replacing an ONU .2  Configuring an Ethernet Switch Queue Scheduling Algorithm Profile ..20  Configuring Signaling Tracing .............. 3-165  3......... 3-149  Enabling Anti MAC Spoofing Function...22  Configuring Network Management Parameters ......................... 3-142  3.. 3-169  . 3-156  3...........1  Enabling / Disabling Signaling Tracing Function ..................................14................17...11  Packet Suppression on an Uplink Port ..... 3-145  3................................. 3-157  3....3  Configuring a Static Route ..............................7  Enabling / Disabling RSTP ................................ 3-155  ONU Bridge Management .......................9  Configuring Dual Uplink Protection ..................................1  Configuring a Management VLAN....19.........3..14.. 3-160  3.....22.. 3-154  3.5  3......... 3-151  3.................................2  Viewing OLT MAC Address Table ....................... 3-144  3...... 3-151  3........... 3-152  Replacing an ONU ....... 3-149  3....................14......15  System Security Management ....16  User Security Management.21  Configuring a Smart Grid Server ............14.................................................. 3-163  3. 3-147  3..15...22..................1  Configuring Aging Time ....... 3-167  3..4  Configuring Access Control of Network Management System ..............................23  Configuring a CLI Account .. 3-143  3............ 3-154  3... 3-141  3.2  Configuring a SNMP TRAP Receiving Address................. 3-150  3.....18  3...1  3....... 3-160  3.............................19... 3-150  Aging MAC Addresses ........... 3-166  3..........18.................16...................................... 3-162  3........................ 3-163  3..........................................1  Configuring a Packet Suppression Profile .............14................... 3-146  3..........22..12  Viewing Uplink Port Loopback.. 3-168  Alarm and Performance Data Management .........................2  Configuring ONU Replacement Aging Interval ..................... 3-151  3...... 3-156  3......................................17.......20..........................22................................22......................... .....................2  Configuring SNMP Time System .............23.......................................5  Enabling / Disabling Performance Classification .......................................... 3-179  Upgrade and Backup Operation....................... 3-182  3.........................25  Time Management ................3  Configuring CPU / Memory Utilization Ratio Threshold of a Card ..... 3-192  3............. 3-192  3..25.............27...........................4  Resetting a PON Port ...........................3  Querying Equipment Uptime ...........25................. 3-184  3........................ 3-185  3.........3  Resetting Standby Card ..........3  Upgrading System Software...................25............................................. 3-178  3...4  Configuring CPU / Memory Utilization Ratio Threshold of ONUs ............................1  Configuring Temperature Threshold ....25............9  Importing Configuration Files .. 3-196  3.............23..............................................25.......................................24..... 3-194  3.26................7  Viewing ONU Automatic Upgrade Log ... 3-176  3.... 3-190  3.23..................................23.........24... 3-173  3......8  Upgrading ONUs in a Batch Manner .....24  3................26  3...................... 3-185  3...................... 3-194  Log Operation ...............6  Upgrading ONUs Automatically .............27  Reset Operation ..........26..25....... 3-175  3.....5  Upgrading Line Interface Cards in a Batch Manner ..........................23......26...................... 3-193  3...4  Backing up System Software .................... 3-177  3....................25..... 3-169  3.......................................... 3-196  ............ 3-191  3........24.......2  Restarting an Appointed Device ................... 3-189  3.26..... 3-183  3............ 3-177  3...25......... 3-179  3......... 3-188  3.............................2  Configuring Optical Module Alarm Thresholds ......... 3-181  3................1  Resetting Line Interface Cards in a Batch Manner ...25..1  Configuring Timing Mode ..25...............24... 3-174  3..1  Exporting Log Files ..........11  Clearing Configuration in Flash .......................3..........10  Exporting Configuration Files .................4  Querying Equipment Time ...........25............. 3-170  3.... 3-187  3..................................2  Setting Saving Configuration Rule ........23.........1  Saving Configuration in Flash ...6  Viewing Enabling Status of Performance Classification ................ 3-181  3..... . 4-19  4. 4-17  4..... 4-20  4..........................5  Viewing Registered ONU List ..........4  Viewing Unauthorized ONU List ...........2  4.......2  Viewing System Time .....2.................1...............1...1...... 4-11  4...... 3-199  3.........................3.... 4-21  .....3  Control Command .........1...29  Viewing System Information ....3...............4  Configuring PON Port Operating Mode ............................. 4-12  4.......................3..................... 4-7  4........... 4-4  4....2  Deauthorizing an ONU ..............................................................2  Enabling / Disabling a PON Port ...28  Forced Active / Standby Switch ........................... 4-3  4.............................1.......................... 4-16  4..1.........................2  Viewing PON Port Firmware Version ............... 4-21  4............2.......1  Configuration Command . 3-197  3...... 4-13  4.4  Refreshing Firmware .............29....2  4  Uploading System Log Automatically ... 4-5  4........3........... 4-1  4.................................................1.........................................7  Enabling / Disabling Performance Classification ..............9  Suppressing Broadcast / Multicast / Unknown Packet of a PON Port .............7  Viewing PON Port MAC Address Table . 4-19  4..3....29...... 3-200  3..................................................... 4-2  4..... 4-2  4..5  Enabling / Disabling FEC Function of a PON Port .....3............. 4-10  4.....29.....1...........2..............6  Configuring DBA Parameters . 3-200  3.....................................3.............................. 4-13  4........1  Configuring OLT Optical Power Compensation ..1  Viewing Card Software / Hardware Version .........3........ 4-15  Get Information Command ..................... 4-18  4......................3..3  Viewing ONU Authorization List ..........................................1  Viewing ONU Type and Version Number ...2........8  Binding / Unbinding a PON Port with a Domain ......................................6  Viewing Unregistered ONU List.......................8  Viewing Optical Module Parameters .......................... 4-16  4......................3  Viewing System Status ..... 4-6  4.3  Resetting an ONU .....................1  Resetting ................................1.................................. 3-200  3... 4-13  4...................27................... 3-201  GUI Reference of the EC4B / EC8B Card .......3  Configuring PON Port Isolation .. 4-14  4............ ....... 5-18  GUI Reference of the HU1A / HU2A / GU6F Card .3................ 5-4  5...... 6-7  ....3................ 5-7  5.........................8  Viewing Optical Module Parameters ................................................2  Viewing ONU Authorization List .........7  Viewing PON Port MAC Address Table ................................................................4  Viewing Registered ONU List ...........6  Enabling / Disabling FEC Function of a PON Port ....... 5-12  5.. 5-16  5....................1............. 5-10  5........2  5......................3....................... 5-1  5.......... 5-18  5............6  Viewing Port Loopback Status........................ 5-13  5...... 5-2  5.............. 5-12  5........3...........1  Resetting .........2.2......................................1......................................................................................................................... 5-10  5...........................3......5  GUI Reference of the GC4B / GC8B Card ..1  Configuring Port RSTP Parameters .1.........2..5  Configuring PON Port Isolation ..........................3........................3...1.........1  Configuration Command .3  Enabling / Disabling Performance Classification ...................3................................... 6-1  6.....................................4  Enabling / Disabling a PON Port . 5-14  5............................................2  Resetting an ONU ...........................1  Configuring Bandwidth ..3.................................. 5-7  5.. 5-15  5......9  Suppressing Broadcast / Multicast / Unknown Packet of a PON Port ................ 5-6  5.......... 6-7  6... 5-5  5.............................1.......1.....2  Configuring Port Performance Thresholds ......1... 5-3  5.2  Viewing RSTP Bridge Information .......................3  6  Control Command ..............3  Configuring Port RSTP .............. 5-10  5........ 6-7  6................ 5-11  Get Information Command .............. 6-5  6.....................................................5  Viewing Unregistered ONU List.....7  Configuring PON Port Key Modification Interval...........................3  Deauthorizing an ONU ................1  Configuring Uplink Port Properties ......1....3..............2  Configuring QinQ ..1  Viewing ONU Type and Version Number ... 6-2  6.................1..8  Binding / Unbinding a PON Port with a VLAN Operation Table .................................... 5-2  5. 5-15  5............................3  Viewing Unauthorized ONU List .................... 5-2  5........................ 5-8  5........ ........................3......1  Managing User Defined Alarms ..................................2.....................3  7  6.................2  Configuring Report Conditions of User Defined Alarms 8-4  GUI Reference of the FAN Card ....................................... 9-1  9..............1  Managing User Defined Alarms.......1............................ 9-2  10  GUI Reference of an EPON Terminal ... 6-9  Configuring Clock ..................................... 10-7  ...........7  Viewing Optical Module Parameters ...................................2  Deauthorizing an ONU ........... 8-3  8.....3..............3.............. 7-6  7...................... 8-1  8..... 6-14  GUI Reference of the CE1B / C155A Card .............. 6-11  6........ 10-1  10................... 7-12  GUI Reference of the PUBA Card .......2  Configuring Alarms ................................2...........6.......... 7-3  Performing Loopback .............................. 6-13  6...................................2  Performing Optical Interface Loopback ..................... 10-4  10......................2......4  Managing Alarm Report of an ONU........1  Binding / Unbinding an ONU with a Domain .........1  Configuring System Clock Mode ..3  Performing Loop Test of a Port.............................1  Enabling / Disabling Performance Classification . 7-8  7.....................................................5  Resetting .......................2............................................. 6-12  6................................. 7-2  7......................4  Viewing E1 Status ......................3.....3  Enabling / Disabling Performance Classification ......5  Enabling / Disabling VLAN Performance Statistics ................ 10-4  10...1  Configuring Fan Parameters ............... 8-2  8......................................2  Binding an ONU with a DBA Profile................. 10-3  10..........................................4  Enabling / Disabling Performance Classification ...........................1........6  Resetting a Card ............ 7-11  7..................1  Performing E1 Loopback of the C155A Card .... 8-3  8..................................................3  Performing E1 Loopback of the CE1B Card ..................... 7-1  7.........2........................1  7............3  Configuration Command .....................................2  Configuring Clock Recovery Mode ................... 10-5  10................ 10-6  10........................ 7-10  7................ 10-2  10..........2  8  9  Viewing RSTP Port Information ............................ 7-7  7.......................................................................... 7-6  7............. 7-2  7........................3........... ......................3..14  Configuring Performance Threshold of an FE Port ...........8  Configuring Data Service on a Port ..3...3...... 10-35  10..................... 10-54  .......................11  Configuring TDM Service on a Port ...... 10-50  10.....3.................... 10-23  10... 10-36  10..............3....... 10-44  10..... 10-43  10.... 10-32  10.3........5  Managing Alarm Report of an ONU Port .......................26  Configuring POS Telephone Number ...........................7  Enabling / Disabling Performance Classification ..........3..16  Controlling Port MAC Address Number ...................3......... 10-30  10................... 10-31  10.... 10-13  10..... 10-9  10...3..29  Configuring Optical Line Protection .....3.......3. 10-20  10....3.............................. 10-45  10...............3.. 10-34  10........23  Configuring Bandwidth of the Highest-Priority Service ........... 10-41  10.......... 10-29  10... 10-20  10..........3........35  Configuring Binding Relationship with WAN...................................3........12  Configuring Encryption ....3..................... 10-28  10. 10-25  10......22  Configuring ONU Optical Power Compensation..........3....21  Configuring Port Flow Rate Control Rules ....3... 10-48  10.3.......................... 10-11  10.........3...............3............................... 10-46  10.................. 10-17  10.25  Enabling / Disabling a POTS Port .28  Configuring ONU Bandwidth ....................3.......27  Configuring Intelligent Public Telephone Number.... 10-21  10... 10-24  10......10  Configuring CATV Service on a Port .......3...3.20  Configuring Port QoS Rules .............. 10-14  10.......13  Configuring Port Isolation .. 10-26  10...19  Configuring Port ACL Rules ........3.3...24  Configuring Voice Media Stream .3...............17  Binding a Packet Suppression Profile ........3..............3....6  Configuring Voice MD5 Authentication ...10..............30  Configuring RSTP .................. 10-40  10........... 10-42  10...32  Configuring ONU Ethernet Switch Queue Scheduling Algorithm ...........3.........................................15  Configuring VLAN Translation Mode ..9  Configuring Voice Service on a Port.... 10-39  10.....34  Configuring WAN-Connected Service ........................18  Configuring User Defined Alarms ...................31  Configuring Optical Power Monitor Function ....33  Configuring Management VLAN of an ONU ....3..... .......................5..... 10-63  10..5...... 10-82  10......................... 10-67  10........ 10-81  10. 11-3  11....1  Viewing Optical Module Parameters Information .................9  Testing POTS Port Internal Line Status ...............................5...................... 10-72  10.........................................10  Viewing NGN Statistical Information .............5.....19  Querying ONU POTS Port Status ..5.....4  Viewing WAN Connection Information .........2  Configuring Data Service on a Port .... 10-65  10..15  Viewing RSTP Port Information .......................4  Forcing to Register Again .. 10-79  10.4.................1  Resetting an ONU ..........4  10......... 10-74  10................... 11-1  11................5........20  Performing Emulation Command ............... 11-2  11...................5................................5................ 10-60  10....5.....5.3  Viewing Wi-Fi Status Information ......5..5  Control Command ............... 10-76  10....18  Querying Parameter Configuration of Fax / Modem Service .......5  Obtaining ONU Port MAC Address .............................................................. 11-5  ....... 10-56  10........... 10-57  10..3  Performing Forced Protection Switching of an ONU 10-58  10..................5......5..........4...................................5. 10-59  Get Information Command .........17  Querying MG Configuration .....1  Configuring GPON Service Bandwidth ...........5...................16  Viewing Equipment Information.............2  Configuration Command ......8  Testing POTS Port External Line Status ..................................... 10-88  10..... 10-85  10.........1  Deauthorizing an ONU ....5...........................2.. 10-78  10...5........5...........5.......2..........................10.. 10-71  10.......2  Viewing PON Port Operating Status ................... 10-86  10...................13  Viewing NGN RTP Resource Configuration ........ 10-80  10......................... 10-91  11  GUI Reference of a GPON Terminal .......................2  Refreshing Firmware ......5....5...........6  Viewing ONU Port Connected Equipment Type ......... 11-3  11..21  Querying ONU Capability ...................4............. 10-62  10.... 10-61  10............................................... 10-68  10.............11  Viewing NGN Port Statistical Information .................12  Viewing NGN Resource Status .............4................14  Viewing RSTP Bridge Information .. 10-60  10...... 10-56  10..................... 10-66  10.7  Viewing ONU Ranging Value ................ .11  Configuring Intelligent Public Telephone Number.3............2.......2.........2.....6  Configuring Wi-Fi Service ...2.........3  Resetting an ONU PON Port ...........2...18  Configuring GEMPort Mapping Mode .........16  Enabling / Disabling Performance Classification ...2.......3............ 11-33  11.. 11-37  11..............15  Configuring Performance Threshold of an FE Port .9  Configuring Voice Media Stream .........4..14  Controlling Port MAC Addresses Number .........4..... 11-64  11..........2  Testing POTS Port External Line Status ...5  Configuring Multicast Service on an ONU ......2......... 11-68  ............2........................13  Configuring Port Isolation ..........2.......23  Enabling / Disabling RSTP ............. 11-36  11.........................25  Configuring Bandwidth of an ONU .....................2.. 11-43  11. 11-50  11........4  Configuring CATV Service on a Port ..................17  Configuring Optical Power Monitor Function .......2............21  Binding an ONU Port with a Traffic Policy ....3.2..3  11........ 11-20  11.......... 11-66  Get Information Command ...19  Performing Loop Test of a Port.................... 11-47  11....24  Binding a Packet Suppression Profile .........7  Configuring TL1 Interface WAN-Connected Service 11-26  11......................... 11-16  11.....1  Viewing ONU Ranging Value ... 11-64  11.......... 11-45  11................2...... 11-46  11.... 11-13  11.............2  Resetting an ONU FE Port ................10  Configuring POS Telephone Number ...... 11-17  11...... 11-67  11.......................2...3  Configuring Voice Service on a Port...........2........ 11-55  11..1  Resetting an ONU ....27  Configuring Remote Management ..... 11-48  11.............................................26  Enabling Anti-DoS Attack Function .................................12  Configuring ONU Port Loopback ...............2.... 11-38  11...4  Control Command ......2.........20  Binding Ethernet Switch Queue Scheduling Algorithm Profile .2.......... 11-40  11... 11-65  11...............2............2................... 11-44  11.....2.............................................11.................... 11-51  11........2...........2......................................... 11-59  11.......... 11-39  11. 11-54  11.............. 11-67  11............ 11-52  11............. 11-31  11.. 11-41  11....2.............................22  Configuring Control of ONU Fan ......8  Configuring Management VLAN of an ONU .............2......... ...4.. 11-100  11.. 11-83  11.......4... 11-88  11....4....... 11-99  11...... 11-95  11..3  Testing POTS Port Internal Line Status ...23  Viewing Wi-Fi Status Information ......4..... 11-93  11..............19  Viewing ONU Port Connected Equipment Type ......8  Viewing ONU Port Loopback Test ...4. 11-78  11.......21  Viewing ONU Power Supply Management Status ............ 11-82  11............9  Viewing Port Status Information ......12  Querying Parameter Configuration of Fax / Modem Service ................. 11-98  11..4  Viewing NGN Statistical Information ..............11..... 11-80  11.4...........4......... 11-70  11...4....... 11-77  11............22  Viewing Equipment Information.4.....4......4......7  Viewing NGN RTP Resource Configuration .....14  Performing Emulation Command ........ 11-74  11.....10  Viewing Optical Module Parameters Information ....18  Querying ONU Environment Status............11  Querying MG Configuration ....13  Querying ONU POTS Port Status ....4..................................24  Viewing WAN Connection Statistical Information .........4...........4....................4..........4.........4................6  Viewing NGN Resource Status ..... 11-91  11........20  Querying ONU Voice Port Activation Status ......................4........ 11-79  11.........4..4.....4...5  Viewing NGN Port Statistical Information .... 11-85  11.4................................... 11-96  11....... 11-72  11.....17  Obtaining ONU MAC Address . 11-97  11..... 11-103  ...... 11-86  11........15  Viewing RSTP Bridge Information .....................................................16  Viewing RSTP Port Information ................................. 11-101  11.. 1 Common Command This chapter discusses common commands of the AN5516-06 in detail. and includes the following sections. Querying status Querying instant performance Querying performance history Querying current alarms Querying alarm history Querying real time performance Resetting a card Deleting an object Querying and modifying properties Refreshing an ONU Displaying ONU subscribers Hiding ONU port panel Version: A 1-1 . GC8B. and then select Status Query in the shortcut menu to enter the Status Query window.1 Querying Status Command function The querying status command is used to query the status information of a certain card or ONU. CE1B. then select Status Query in the shortcut menu to enter the Status Query window. 1-2 Version: A . EC8B. C155A. HU2A. and right-click this ONU in the ONU list tab at the right of the GUI. Access method Querying status of a card Right-click a certain card in the object tree pane. HU1A. PUBA. FAN cards and EPON ONUs of various types all support this command. GC4B. Querying status of an ONU Click the interface card that is connected with the designated ONU in the object tree pane. Applicable object The EC4B. GU6F.AN5516-06 Optical Line Terminal Equipment GUI Reference 1. Parameter of the ONU status Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The number of the slot containing — Read-only — — Read-only — The online status of the ONU. — Read-only — ONU MAC/SN The MAC address of the ONU. ONU. not — suitable for the core switch card and the uplink card. The hardware number of the card. The connection status of the uplink — card. — only suitable for an uplink card. the PON interface connected with the ONU. The present status of the uplink card.1 Common Command Parameter Parameter of the card status Parameter Name Slot ID Software Version Hardware Version Online-Status Link Status Parameter Description The number of the slot containing the Value Range / Requirement — card. — Read-only — Slot No. not Property Configuration Method Read-only — Read-only — Read-only — Read-only — Read-only — — suitable for the core switch card and the uplink card. — Read-only — ONU Type The type of the ONU. only suitable for an uplink card. The software number of the card. ONU Online-Status Version: A 1-3 . ONU Authorized The authorization number of the No. The rotating speed of the FAN card.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter of the FAN card status Parameter Name FAN NO Online-Status FAN-Speed Temperature 1-4 Parameter Description The number of the slot containing the FAN card. Value Range / Property Configuration Method — Read-only — — Read-only — — Read-only — — Read-only — Requirement Version: A . Whether the FAN card is present and used. The ambient temperature of the FAN card. users need to set the performance collection scheme. GC8B. and right-click this ONU in the ONU list tab at the right of the GUI. then select Instant Performance in the shortcut menu to enter the Instant Performance window. Version: A 1-5 .1 Common Command 1. The access method is: clicking Performance → Performance Collection Scheme in the main menu. Applicable object The EC4B.2 Querying Instant Performance Command function The querying instant performance command is used to query the current 15-minute performance data and the past sixteen 15-minute performance data records of a certain card or ONU. 2. EC8B. Note: 1. Before querying the instant performance. Before querying the instant performance of a card or ONU. HU2A. Access method Querying instant performance of a card Right-click a card in the object tree pane. HU1A. GU6F cards and ONUs of various types all support this command. Querying instant performance of an ONU Click the interface card that is connected with the designated ONU in the object tree pane. users need to enable the performance collection function in the Performance Group tab of this card or ONU. GC4B. Then the Instant Performance window will appear. and then select Instant Performance in the shortcut menu. 1-6 Version: A . The start time of performance statistics.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Object Performance Type Value Unit Begin Time End Time Parameter Description The card or ONU to be queried. Error Frame Count. including Packet Count. Manage Packet Count. The current value of the performance. The query result of the performance type. etc. Traffic Analysis. The end time of performance statistics. The unit of the performance value. Value Range / Property Configuration Method — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — Requirement The category of performance Performance Group Type statistics. GU6F cards and ONUs of various types all support this command. Then the Historical Performance window will appear. EC8B. then select Historical Performance in the shortcut menu to enter the Historical Performance window.1 Common Command 1. Note: 1. Access method Querying performance history of a system. users need to ensure that the collection function in the Performance Group tab is enabled in the designated interval. module.3 Querying Performance History Command function The querying performance history command is used to query the performance history of a certain card or ONU in a designated 15-minute or 24-hour period. or card Right-click a system. Before querying the performance history. users need to set the performance collection scheme. The command access method is: clicking Performance → Performance Collection Scheme in the main menu. GC4B. GC8B. and then select Historical Performance in the shortcut menu. or card in the object tree pane. HU1A. Applicable object The system. Version: A 1-7 . 2. Before querying the performance history. HU2A. the EC4B. and right-click this ONU in the ONU list tab at the right of the GUI. module. Querying performance history of an ONU Click the interface card that is connected with the designated ONU in the object tree pane. the module. Error Frame Count. etc. The unit of the performance value. including Packet Count.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Object The card or ONU to be queried. Value Range / Property Configuration Method — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — Requirement The category of performance Performance Group Type statistics. Value Unit Begin Time End Time The current value of the performance. Manage Packet Count. 1-8 Version: A . Performance The query result of the Type performance type. The end time of performance statistics. Traffic Analysis. The start time of performance statistics. CIO. Then the Current Alarm window will appear. GC8B.4 Querying Current Alarms Command function The querying current alarms command is used to query current alarms of a card or ONU. and right-click this ONU in the ONU list tab at the right of the GUI. module. — Read-only — The object reporting the alarm. GU6F. — Read-only — — Read-only — The name of the reported alarm. or card Right-click a system. — Read-only — Begin Time The start time of the alarm. and then select Current Alarm in the shortcut menu. the HSWA. C155A. PUBA. Alarm Type The type of the alarm. EC8B. Parameter Parameter Name Network Element Object Alarm Name Parameter Description Value Range / Requirement Property Configuration Method The NE generating the alarm. PWR. HU1A. FAN cards and ONUs of various types all support this command. EC4B. HU2A. — Read-only — Version: A 1-9 . Access method Querying current alarms of a system. CE1B. then select Current Alarm in the shortcut menu to enter the Current Alarm window. or card in the object tree pane. including all alarms that are not handled and not confirmed by users. the module. GC4B. — Read-only — End Time The end time of the alarm.1 Common Command 1. Applicable object The system. module. Querying current alarms of an ONU Click the interface card that is connected with the designated ONU in the object tree pane. Confirm The user who confirms this User alarm.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Confirm The time at which a user Time confirms the alarm. Confirm Information 1-10 Value Range / Property Configuration Method — Read-only — — Read-only — — Read-only — Requirement The confirmation information input by the user confirming the alarm. Version: A . FAN cards and ONUs of various types all support this command. Access method Querying alarm history of a system. including all alarms that have ended and been confirmed by users. Querying alarm history of an ONU Click the interface card that is connected with the designated ONU in the object tree pane. GU6F. the module. — Read-only — End Time The end time of the alarm. — Read-only — Version: A Requirement 1-11 .5 Querying Alarm History Command function The querying alarm history command is used to query the alarm history of a card or ONU. — Read-only — Alarm Name The name of the alarm. then select Historical Alarm in the shortcut menu to enter the Historical Alarm window. EC8B.1 Common Command 1. module. — Read-only — Begin Time The start time of the alarm. or card Right-click a system. module. or card in the object tree pane. and then select Historical Alarm in the shortcut menu. C155A. PWR. Object Value Range / Property Configuration Method — Read-only — The object reporting the alarm. HU2A. the HSWA. GC8B. Parameter Parameter Name Parameter Description NE The NE generating the alarm. HU1A. and right-click this ONU in the ONU list tab at the right of the GUI. CIO. GC4B. PUBA. EC4B. Applicable object The system. CE1B. — Read-only — Alarm Type The type of the alarm. Then the Historical Alarm window will appear. Confirm Time Confirm User Confirm Information 1-12 The time at which a user confirms the alarm. Value Range / Property Configuration Method — Read-only — — Read-only — — Read-only — — Read-only — Requirement The confirmation information input by the user confirming the alarm.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Last Time The duration of the alarm. Version: A . The user who confirms this alarm. 1 Querying CPU / Memory Utilization Ratio Command function The querying CPU / memory utilization ratio command is used to query the CPU / memory utilization ratio of a card or ONU. and then select Realtime Performance  CPU/memory Proportion in the shortcut menu. Via this command. C155A. CE1B. GC8B. and PUBA cards. and the AN5506-10B all support this command. users need to enable the CPU / memory utilization ratio collection function in the Performance Group tab of this card or ONU. Version: A 1-13 . Then the CPU/memory Proportion window will appear. the AN5506-04B.6. then select Realtime Performance  CPU/memory Proportion in the shortcut menu to enter the CPU/memory Proportion window.1 Common Command 1. Querying CPU / memory utilization ratio of an ONU Click the interface card that is connected with the designated ONU in the object tree pane. GC4B. the AN5006-07B. EC8B. Applicable object The HSWA. EC4B. Note: Before querying the CPU / memory utilization ratio of a card or ONU. users can know the equipment running status.6 Querying Real Time Performance 1. and right-click this ONU in the ONU list tab at the right of the GUI. Access method Querying CPU / memory utilization ratio of a card Right-click a card in the object tree pane. AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Realtime Curve Parameter Description Property The real time sampling curve of the CPU / memory utilization Configuration Method Select the PON port or ONU to be queried in Read-only ratio of the card or ONU. 1-14 Version: A . Access method Right-click a card in the object tree pane. and unit. performance value. Then the Statistics on OLT End PON Port window will appear.2 Querying PON Port Performance Statistical Value Command function The querying PON port performance statistical value command is used to query the PON port performance statistical value of an interface card. and then select Realtime Performance  Statistics on OLT End PON Port in the shortcut menu.6. performance type. users need to enable the PON port performance staticstics function in the Performance Group tab of this card. GC4B. Read-only the logical window. Applicable object The EC4B. EC8B. and then click the Start Collect button in the toolbar. click the Start Collect button in the toolbar. time. the logical window. and then click Performance Data in the tab that appears. Note: Before querying the PON port performance statistical value of a card. and GC8B cards support this command. The real time sampling value of Select the PON port or ONU to be queried in the CPU / memory utilization Performance ratio of the card or ONU. 1. Data It includes the following items: object. and then click the Start Collect button in the toolbar. and then select Real Time Performance  Uplink Port Statistics in the shortcut menu. and then click Performance Data in the tab that appears. and GU6F cards support this command. Access method Right-click a card in the object tree pane. performance value. 1. window.1 Common Command Parameter Parameter Name Realtime Curve Parameter Description Property The real time sampling curve of the PON port performance of the Configuration Method Select the PON port to be queried in the logical Read-only card. The real time sampling value of Select the PON port to be queried in the logical the PON port performance of the Performance card. Data It includes the following items: Read-only object. click the Start Collect button in the toolbar. Configuration Method Select the uplink port to be queried in the Read-only logical window. time. and unit. performance type.3 Querying Uplink Port Performance Statistical Value Command function The querying uplink port performance statistical value command is used to query the uplink port performance statistical value of an uplink card. 1-15 .6. and then click the Start Collect button in the toolbar. HU2A. Parameter Parameter Name Realtime Curve Version: A Parameter Description Property The real time sampling curve of the uplink port performance of the uplink card. Applicable object The HU1A. Then the Uplink Port Statistics window will appear. window. Applicable object ONUs of various types all support this command. performance type. logical window.4 Querying Uplink / Downlink Rate Command function The querying uplink / downlink rate command is used to query the uplink / downlink rate of an ONU. Read-only the logical window. performance value. and then click the Start Collect button in the toolbar. and unit. time. Access method Click the interface card that is connected with the designated ONU in the object tree pane. performance value. and then click Performance Data in the tab that appears. and unit.6. and right-click this ONU in the ONU list tab at the right of the GUI. 1. Data It includes the following items: Read-only object. time. click the Start Collect button in the toolbar. Data It includes the following items: object. performance type. then select Realtime Performance  Up/Down Rate in the shortcut menu to enter the Up/Down Rate window. click the Start Collect button in the toolbar.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Property Configuration Method The real time sampling value of Select the uplink port to be queried in the the uplink port performance of the Performance uplink card. 1-16 Version: A . the logical window. The real time sampling value of Select the PON port or ONU to be queried in the uplink / downlink rate of the Performance ONU. and then click Performance Data in the tab that appears. Parameter Parameter Name Realtime Curve Parameter Description Property The real time sampling curve of the uplink / downlink rate of the Configuration Method Select the PON port or ONU to be queried in Read-only ONU. and select Reset To… in the shortcut menu. Applicable object The EC4B. and the equipment panel will be displayed in the top right pane of the GUI. C155A. Caution: This command can delete the original card and clear the configured services on this card. HU1A. EC8B. Then the Reset To… window will appear. GU6F. HU2A. users need to perform this command to complete the type modification. Version: A 1-17 . CE1B. When a certain card of the equipment is replaced with a card of another type. GC4B. and PUBA cards support this command. Access method Click a certain module in the object tree pane.1 Common Command 1.7 Resetting a Card Command function The resetting command is used to modify the card at the ANM2000 GUI and the type of the card in the designated slot. GC8B. so use care when executing it. Right-click the card in the designated slot. HU1A. Access method Deleting a card.AN5516-06 Optical Line Terminal Equipment GUI Reference 1. HU2A. Deleting an ONU Click the interface card that is connected with the designated ONU in the object tree pane. or system in the object tree pane. EC4B. and ONUs of various types all support this command. GC8B. 1-18 Version: A . the HSWA. and right-click this ONU in the ONU list tab at the right of the GUI. Caution: This command can delete the designated object and the configured services on this object. the module. module. then select Delete in the shortcut menu to enter the Delete window. PUBA. CIO. and then select Delete in the shortcut menu. so use care when executing it. Then the Delete window will appear. GU6F. CE1B. Applicable object The system. C155A. PWR. FAN cards.8 Deleting an Object Command function The deleting command is used to delete the designated object and subscriber service configuration on this object. GC4B. module. or system Right-click a card. EC8B. and ONUs of various types all support this command. or system Right-click a card. PWR. module. the HSWA. GC8B. and right-click this ONU in the ONU list tab at the right of the GUI. HU2A. Then the Property window will appear. CE1B. GC4B. Applicable object The system. Version: A 1-19 . PUBA. EC4B. Access method Querying properties of a card. HU1A. and then select Property in the shortcut menu. GU6F.9 Querying and Modifying Properties Command function The querying and modifying property command is used to query and modify property parameters of the designated object. EC8B.1 Common Command 1. FAN cards. then select Property in the shortcut menu to enter the Property window. the module. module. CIO. Querying properties of an ONU Click the interface card that is connected with the designated ONU in the object tree pane. or system in the object tree pane. C155A. Users can Protocol Type The type of the network management protocol. IP Address IP Mask Gateway The IP address of the equipment. Optional. this item.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter System property parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The system number of the System No. — Optional. — Read-only — Optional. Click to type the subnet mask. The subnet mask of the equipment. Users do not — need to configure Click to type the user name. 1-20 Version: A . directly. — keep the default setting Click the drop-down list to select the protocol type. Click to type the gateway address. The gateway address of the equipment. UserName The user name of the AN5516-06 system administrator. equipment in the entire ANM2000. It can be composed of defined by users. Password The password of the AN5516-06 system administrator. It should be System Name The system name. this item. Managing The IP address of the network Program management computer. English letters or Optional Click to type the system name. Users do not — need to configure Click to type the password. System Type The equipment type. — Read-only — generated automatically. — Compulsory — Compulsory — Compulsory — Read-only Click to type the IP address. digital numbers. Users do not need to configure this Click to type the card version. item. Read-only — Optional. Version The version of the card. Version: A 1-21 . Card Type The type of the card. Module Type Serial No. and can use Click to type the card name. the card name generated by the system.1 Common Command Module property parameter Parameter Name Parameter Description Property Configuration Method Read-only — The number of the module in Module No. item. Users can leave this Click to type the serial number. Card No. Optional. Users do not need Module Name The name of the equipment module. and can use Click to type the module name. Read-only — Optional. It is the same as the slot number of this card. item blank. generated automatically. The user defined serial number of equipment module. generated automatically by the system. Optional. the module name generated by the system. Card property parameter Parameter Name Parameter Description Property Configuration Method Read-only — The number of the card. to configure this item. this system. The type of the module. Users do not need to configure this Card Name The name of the card. Card Name The object name of the ONU. Card Type The type of the ONU. Read-only Optional Version The version of the ONU. Parameter Description The authorization number of the ONU.AN5516-06 Optical Line Terminal Equipment GUI Reference ONU property parameter Parameter Name Card No. 1-22 — Click to type the version. which is composed of the PON port connected with the ONU and Click to type the ONU name. Property Configuration Method Read-only — Optional. Users do not need to configure this item. Users can use the default setting. Version: A . the name of the ONU. and then select Refresh in the shortcut menu to execute this command. Access method Click an EPON / GPON interface card in the object tree pane.1 Common Command 1. Version: A 1-23 .10 Refreshing an ONU Command function The refreshing command is used to refresh the status information of an ONU. Applicable object ONUs of various types all support this command. right-click the designated ONU in the ONU list tab at the right of the GUI. information of ONU subscribers includes the number of the PON port connected with each ONU. After the ONU subscriber information is displayed. 1-24 Version: A . right-click a certain ONU in the ONU list tab. and then select Display ONU User in the shortcut menu. the authorization number of each ONU. an expand button will appear at the left of each ONU. and the Hide ONU User command will appear in the shortcut menu.11 Displaying ONU Subscribers Command function The displaying ONU subscriber command is used to expand and display information of ONU subscribers in the ONU list tab. right-click a certain ONU in the ONU list tab at the right of the GUI.AN5516-06 Optical Line Terminal Equipment GUI Reference 1. users can click this expand button to expand and display information on this ONU. the slot number of the card containing each PON port. etc. In the ONU list tab. Applicable object ONUs of various types all support this command. Access method Click an EPON / GPON interface card in the object tree pane. Click Hide ONU User to hide the ONU-related subscriber information. right-click the designated ONU in the ONU list tab at the right of the GUI.12 Hiding ONU Port Panel Command function The hiding ONU port panel command is used to hide the port panel of the designated ONU on the ANM2000 GUI.1 Common Command 1. After the previous operations. and then select Hide ONU Port Panel in the shortcut menu. Applicable object ONUs of various types all support this command. Version: A 1-25 . After the ONU port panel is hidden. and the Display ONU Port Panel command will appear in the shortcut menu. right-click the designated ONU. the port panel of the designated ONU will not be displayed on the ANM2000 GUI. Access method Click an EPON / GPON interface card in the object tree pane. Click Display ONU Port Panel to display the ONU port panel on the ANM2000 GUI. . Adding a module Viewing Topology Pinging Telnetting Time calibration Detecting physical configuration Authorizing cards Performing synchronization operation Defining a profile Batch configuration Managing alarms Version: A 2-1 .2 GUI Reference of a System This chapter discusses operation commands of the AN5516-06 system in detail. and includes the following sections. and then select Add Module in the shortcut menu. and can Click to type the module name. use the module name generated by the system. Access method Right-click the designated system in the object tree pane. Then the Add Module window will appear. Module The name of the equipment Name module. Users do not need to configure this item. Version: A . number of equipment Users can leave this item module.1 Adding a Module Command function The adding module command is used to add equipment modules after a system is created. blank. 2-2 Read-only The user defined serial Optional. Optional. — Click to type the serial number. Parameter Parameter Name Module No. Module The type of the equipment Type module.AN5516-06 Optical Line Terminal Equipment GUI Reference 2. generated automatically. Parameter Description Property Configuration Method Read-only — The number of the module in this system. Serial No. Then the topology view will appear. Version: A 2-3 . Access method Right-click the designated system in the object tree pane.2 GUI Reference of a System 2. and then select Topology in the shortcut menu.2 Viewing Topology Command function The viewing topology command is used to view the topology view of the network. 2-4 Version: A . so as to check whether the ANM2000 communicates with the system equipment normally. Then the Ping command window will appear. and then select Ping in the shortcut menu. Access method Right-click the designated system in the object tree pane.AN5516-06 Optical Line Terminal Equipment GUI Reference 2.3 Pinging Command function The pinging command is used to ping the equipment from the network management server. Access method Right-click the designated system in the object tree pane. and then select Telnet in the shortcut menu.4 Telnetting Command function The telnetting command is used to telnet the system equipment.2 GUI Reference of a System 2. so as to execute the operations in the CLI network management system. Then the Telnet command window (for the operations in the CLI network management system) will appear. Version: A 2-5 . AN5516-06 Optical Line Terminal Equipment GUI Reference 2. Access method Right-click the designated system in the object tree pane. Then the Time Calibration window will appear. and then select Config → Time Calibration in the shortcut menu. click the OK button. 2-6 Version: A .5 Time Calibration Command function The time calibration command is used to synchronize the system equipment with the network management system. In the Time Calibration window. and the system will start to execute the time calibration command. Then the Detect Physical Configuration window will appear. and then select Detect Physical Configuration in the shortcut menu. Version: A 2-7 . Access method Right-click the designated system in the object tree pane.2 GUI Reference of a System 2.6 Detecting Physical Configuration Command function The detecting physical configuration command is used to synchronize the current physical configuration of the equipment with the network management system. Then the Set Card Authorization window will appear. Parameter Parameter Name Slot No. Set Card Authorization ANMS Config Device Config Parameter Description The number of the slot containing the card. 2-8 Value Range / Version: A . Hardware The type of the card actually Config inserted in the equipment slot. Requirement — Property Configuration Method Read-only — Click the drop-down list to Is used to select the type of the authorized card. pre-authorization application.7 Authorizing Cards Command function The authorizing card command is used to authorize the cards of the system equipment. suitable for the — Optional The type of the card added via the ANM2000. — Read-only — — Read-only — — Read-only — The card type issued to and stored in the RAM of the equipment.AN5516-06 Optical Line Terminal Equipment GUI Reference 2. and then select Card Config in the shortcut menu. Access method Right-click the designated system in the object tree pane. select the type of the card to be authorized. Version: A 2-9 .2 GUI Reference of a System 2.8.8 Performing Synchronization Operation 2.1 Manually Synchronizing ONUs Command function The manually synchronizing ONU command is used to synchronize information of various ONUs manually. and then select ONU Manual Synchronization in the shortcut menu to manually synchronize information of various ONUs under this system. Access method Right-click the designated system in the object tree pane. Parameter Parameter Name Parameter Description Profile The name of the ONU port rate Name control profile. Its meaning is described as Us CBS (Byte) Double-click to type the uplink specific burst length.1 Defining an ONU Port Rate Control Profile Command function The ONU port rate control profile is used to perform the rate control of the uplink / downlink data stream on an ONU port. the uplink data stream and 0 to 4294967294.9 Defining a Profile 2. When Us Policing exceeds the guaranteed rate. 2-10 Version: A . follows: When a burst occurs in The value range is Optional. and then select Config → Profile Definition → ONU Port Speed Limit Profile in the shortcut menu. Optional. The default Enable. 0 to 1000000.AN5516-06 Optical Line Terminal Equipment GUI Reference 2. Value Range / Requirement Property — — Click the Enable / Disable Compulsory When Us Policing the unit being Status is set to kbit/s. this value is null. this traffic (exceeding the guaranteed value is null. (kbit/s) drop-down list to select the value. The default Enable. parameter is valid. so as to prevent this ONU port from occupying too much bandwidth. rate) for this port to use. Access method Right-click the designated system in the object tree of the object tree pane. Then the ONU Port Speed Limit Profile window will appear. The minimum rate of the uplink data stream.9. with CIR type the profile name. parameter is valid. Policing Method Double-click to The value range is Us Configuration Double-click to type the uplink port guaranteed rate. with the unit being Status is set to the system can assign a rated byte. Us Policing Status Enabling / disabling the uplink rate control function. 0 to 16777215. When Ds Policing with the unit being Status is set to kbit/s. 0 to 16777215. Ds Policing The minimum rate of the CIR downlink data stream. Double-click to type the uplink excess burst length. (kbit/s) Ds Policing The maximum rate of the PIR downlink data stream. Version: A 2-11 . Double-click to type the downlink port guarantee rate. The value range is Optional. When Ds Policing Double-click to with the unit being Status is set to type the downlink kbit/s. Defining an ONU Data Port Property Profile Command function The ONU data port property profile is used to bind itself with an ONU data port and configure port properties of the ONU. The value range is Optional.2 GUI Reference of a System Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Its meaning is described as follows: When a burst occurs in Us EBS (Byte) the uplink data stream and The value range is Optional. The default Enable.9. this peak cell rate. this value is null. Access method Right-click the designated system in the object tree of the object tree pane. and enable / disable status of flow control function. this traffic (exceeding the guaranteed value is null. duplex mode.2 Click the Enable / Disable Compulsory drop-down list to select the value. (kbit/s) 2. rate and the specific burst length) for this port to use. and then select Config → Profile Definition → ONU Data Port Attribute Profile in the shortcut menu. exceeds the guaranteed rate 0 to 4294967294. The port properties of an ONU include auto-negotiation property. value is null. Then the ONU Data Port Attribute Profile window will appear. parameter is valid. parameter is valid. Ds Policing Status Enabling / disabling the downlink rate control function. parameter is valid. When Us Policing and the specific burst length. the with the unit being Status is set to system can assign an extra byte. The default Enable. The default Enable. rate. this parameter select the value. 10M.3 Defining a Bandwidth Profile Command function The bandwidth profile is used to bind with an ONU and limit the bandwidth of this ONU. (unidirectional transmission). data port. and users can Duplex select Full-Duplex Full-Duplex / (bi-directional transmission) Half-Duplex or Half-Duplex When Auto Click the Negotiation is set to drop-down list to Disable. is valid. The value range is Is used to select the Speed operating rate of the ONU data port. Value Range / Requirement Property Configuration Method Double-click to — — type the profile name. When Auto Click the Negotiation is set to drop-down list to Disable. negotiated to the maximum transmission rate. when flow control function is Select or clear the — Optional enabled.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Profile Name Parameter Description The name of the ONU data port property profile. 100M. control will be performed. 2-12 Version: A . When this item is set to Enable. this parameter select the value. the data port of the Auto ONU and other equipment Negotiation ports can be auto Click the Enable / Disable Compulsory drop-down list to select the value. is valid. with the unit being bit/s.9. Is used to configure the operating mode of the ONU Optional. the congestion Flow Control check box. 2. Optional. Is used to enable / disable the flow control function of Flow Control the ONU data port. The default value is 100M. and 1000M. with the unit Bandwidth the ONU. with the unit Bandwidth at the ONU. and then select Config → Profile Definition → Bandwidth Profile in the shortcut menu. Up MIN The minimum guaranteed The value range is 0 to Guaranteed bandwidth of the uplink service at 1000000. with the unit being kbit/s. value is 640. The maximum allowed bandwidth of the downlink service at the Down Max Allowed Bandwidth (kbit/s) ONU. Compulsory downlink maximum allowed bandwidth. with the unit Bandwidth value and the Upstream Fixed being kbit/s. Up Max The sum total of the Up MIN The value range is 256 to Allowed Guaranteed Bandwidth (kbit/s) 1000000. Version: A 2-13 . — Compulsory type the profile name. The default value is 1000000. The default (kbit/s) Bandwidth (kbit/s) value cannot value is 1000000. Then the Bandwidth Profile window will appear. Parameter Parameter Name Profile Name Parameter Description Value Range / Requirement Property Configuration Method Double-click to The name of the bandwidth profile. Double-click to Down MIN The minimum guaranteed The value range is 0 to Guaranteed bandwidth of the downlink service 1000000. The default (kbit/s) resource can be released. This bandwidth being kbit/s.2 GUI Reference of a System Access method Right-click the designated system in the object tree of the object tree pane. exceed the Up Max Allowed Bandwidth (kbit/s) value. value. The sum total of the Down MIN Guaranteed Bandwidth (kbit/s) value and the Upstream Fixed Bandwidth (kbit/s) value cannot exceed the Down Max Allowed Bandwidth (kbit/s) Double-click to type the The value range is 256 to 1000000. Double-click to type the uplink Compulsory maximum allowed bandwidth. type the Compulsory downlink minimum guaranteed bandwidth. The maximum allowed bandwidth of the uplink service at the ONU. The default (kbit/s) can be released. value is 640. Double-click to type the uplink Compulsory minimum guaranteed bandwidth. This bandwidth resource being kbit/s. Then the Service Model Profile window will appear. and QinQ function status. 2. The configuration items include service type.4 Defining a Service Model Profile Command function The service model profile is used to configure the data service type in the batch configuration of an ONU. 2-14 Version: A .9. translation enabling status. This The value range is 256 to bandwidth resource cannot be 1000000. Double-click to Compulsory type the uplink fixed bandwidth. and then select Config → Profile Definition → Service Model Profile in the shortcut menu. with the unit released. CVLAN mode. Access method Right-click the designated system in the object tree of the object tree pane.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Upstream Fixed Bandwidth (kbit/s) Parameter Description Value Range / Requirement Property Configuration Method The fixed bandwidth assigned to the uplink service at the ONU. and is dedicated for this being kbit/s. ONU. and transmits them transparently.2 GUI Reference of a System Parameter Parameter Name Profile Name Parameter Description The name of the service model profile. the ONU does not process the data. this parameter is translated into the Select or clear the corresponding check box. QinQ State when the QinQ VLAN function is enabled. Version: A 2-15 . Value Range / Requirement Property Configuration Method Double-click to — — type the profile name. In Tag mode. the ONU adds one VLAN tag for the CVLAN Mode data. The processing mode of the CVLAN. Is used to enable / disable Compulsory. valid. unicast Service type corresponds to the data (unicast / service. Click the Tag / Transparent Compulsory drop-down list to select the value. The service type. When CVLAN when the translation TranslationState function is enabled. Is used to enable / disable the QinQ VLAN function. be added. the double-tagged VLAN will Select or clear the Enable / Disable Compulsory corresponding check box. service. In Transparent mode. appointed VLAN ID. the translation function. the Enable / Disable CVLAN ID will be Mode is set to Transparent. and multicast multicast) corresponds to the IPTV Click the unicast / multicast Compulsory drop-down list to select the value. Read-only. and then select Config → Profile Definition → SVLAN Profile in the shortcut menu. The TPID value.5 Defining a SVLAN Profile Command function When the QinQ function is enabled. Its value should be Compulsory Double-click to type the outer VLAN ID value. Version: A . configurations need to be performed in the — VLAN Local Config window. SVLAN Name The related The service name configured in the local — VLAN tab. value. SCOS 2-16 The priority or CoS The value range is 0 priority of the packets in to 7. The value range is 0 to 65534. the SVLAN profile is used to add the SVLAN tag for the designated service on an ONU. in the local VLAN range of the service. value is null. The default value is Compulsory Double-click to type the TPID value.9.AN5516-06 Optical Line Terminal Equipment GUI Reference 2. Parameter Parameter Parameter Value Range / Name Description Requirement Profile The name of the Name SVLAN profile. The default the PON. 33024. Then the SVLAN Profile window will appear. The default SVID The outer VLAN ID value is null. Access method Right-click the designated system in the object tree of the object tree pane. The TPID values of the inner STPID and outer tags both use 0x8100 defined by the protocol. — Property — Configuration Method Double-click to type the profile name. Compulsory Double-click to type the priority value. The value range is 0 to 4085. Optional. and voice call parameters. the fixed The default protocol is the part is RTP. Then the Softswitch Parameters Profile window will appear. parameter profile. Parameter Parameter Name Parameter Value Range / Description Requirement Property Configuration Method The name of the Profile Name softswitch platform interconnection — — Double-click to type the profile name. end value of this Version: A 2-17 . less than the resource name.9. digitmap. and then select Config → Profile Definition → Softswitch Parameters Profile in the shortcut menu. The fixed part of the RTP resource name. The start value of the RTPNameVarBegin variable part of the RTP resource name.2 GUI Reference of a System 2. The value range The start value Double-click to type the is 0 to 65534.248 protocol.6 Defining a Softswitch Platform Interconnection Parameter Profile Command function The softswitch platform interconnection parameter profile is used to configure the parameters for interconnection between the VoIP service on an ONU and the softswitch platform. This item is valid only this parameter is when the H. the RTP resource name RTPNameFixedPart When the MGC is RTP/1000.248 valid. value is RTP/. If Optional. fax parameters. Access method Right-click the designated system in the object tree of the object tree pane. Double-click to type the fixed part of the RTP resource name. H. of the variable start value of the The default part must be variable part of the RTP value is 4000. protocol is used. The parameters to be configured include resource name. The value range than the start Double-click to type the is 0 to 65534. Is used to control the RTPnameFixedlengt length of the RTP h source name. protocol is the value. The default value is 16. with When the MGC digitmap short timer dialing scheme in the the unit being s. Fixed / Unfixed. is 1 to 254. Optional. Optional. valid. The step of the variable RTPNameVarStep part of the RTP resource name. this parameter is valid. Double-click to type the matched a certain is 1 to 254. The number string has The value range Optional. When the variable part of the RTP value is 9000. The end value of the variable part must be larger The end value of the RTPNameVarEnd variable part of the RTP resource name. valid. with the unit being s. The value range When the MGC Double-click to type the is 0 to 65534.248 protocol. value of this end value of the The default part. MGC protocol is resource name. When the MGC protocol is the H. When the MGC protocol is the Click the drop-down list H. the H. The value range Digitmap Start Timer The length of time to (s) wait for a dial tone. When the MGC protocol is the H. this parameter is valid. to select the value. Version: A . this parameter is name. protocol is the step of the variable part The default H. and the default value is Fixed. this parameter is Double-click to type the digitmap start timer value. Optional.248 protocol. Digitmap Short Timer (s) 2-18 Optional.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Value Range / Description Requirement Property Configuration Method part. this parameter is valid.248 protocol.248 protocol. of the RTP resource value is 1.248 protocol. The default value is Fixed. VBD State Is used to enable / Disable / disable the Tx / Rx Enable. mode.248 protocol. Disable. it means the G711U.2 GUI Reference of a System Parameter Name Parameter Value Range / Description Requirement digitmap. this parameter is Double-click to type the digitmap long timer value. to select the value. So the system should not report the matching conditions immediately. this parameter is valid.248 protocol. The default value is 10. immediately. The protocol is the Click the drop-down list Map the system will report default value is H. The default value is 16. with the unit being ms. When VBD State is set to Double-click to type the Enable. G711A. is 1 to 254. Report. The value range is 1 to 254. The default value is 20. The number string Digitmap Long needs at least one digit Timer (s) to match any dialing scheme in the digitmap. When the MGC protocol is the H. but the The default H. The packet interval default value is adjustment function. system may receive value is 4. parameter is valid. Optional. with the unit being ms. parameter is valid. When VBD State is set to Double-click to type the Enable. 2-19 . Optional. this VBD Tx packet interval. the matching conditions Report.248 protocol. The value range VBD Rx Interval (ms) Adjusts the Rx packet interval. Optional. this parameter is Property Configuration Method valid. The value range VBD Tx Interval (ms) Adjusts the Tx packet interval. numbers with more digits to match other dialing schemes. with the unit being s. When VBD speech encoding or No Change. VBD Voice Coder Version: A Optional Click the drop-down list to select the value. is 1 to 254. Optional.30 transparent Users can select Optional. State is set to Click the drop-down list to select the value. If the number string matches any dialing Match Report / When the MGC Notify Match Each scheme in the digitmap. this VBD Rx packet interval. In T. valid. this system. negotiation. Registers the howler tone timeout processing Offhook Warning function. valid. The default Double-click to type the Flash time length. The value range is 90 to 200. reporting events to the MGC according to event types.38 event detection and report mode. The generic width is 90 to 120 ms. The T. and uses RFC2833 to The default encapsulate the DTMF. value is non Optional Click the drop-down list to select the value. the system will stop playing the howler tone. The value range DefRFC2833PT The RFC2833 value in is 96 to 127.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Value Range / Description Requirement format used by the The default Enable. The default value is Optional Double-click to type the default PT value. auto negotiation / RFC2833 Negotiate Registers the RFC2833 non auto automatic negotiation. value is No parameter is Change. 96. RFC2833 default PT The value range is 96 to 127. The the default load mode. default value is Double-click to type the Optional value. Property Configuration Method Register / Non-register. Register. value is 90. The width of the Flash FlashThrshold (ms) lower pulse signal. with the unit being Optional ms.38 Event Detect Mode have the following meanings respectively: Normal means Normal / V21 / All Optional Click the drop-down list to select the value. The RFC2833 DefRFC2198PT redundancy value in the default load mode. Its three values T. V21 2-20 Version: A . After howler Tone Timeout tone timeout occurs. auto negotiation. The default Optional value is Click the drop-down list to select the value. 97. The value range is 1 to 254. Optional The default Double-click to type the non-response-time. with Timeout (s) sending the transaction the unit being s. when the line is busy. Click the drop-down list to select the value. The value range Dial Tone Timeout The time to play the dial (s) tone. Optional The default Double-click to type the dial tone time.2 GUI Reference of a System Parameter Name Parameter Value Range / Description Requirement Property Configuration Method means only reporting the V21 events. If The default Version: A Optional Optional Double-click to type the repeater timer. FSK / DTMF. with the unit being s. The length of ring tone. value is 60. The time length of the ROH Timeout (s) howler tone from the telephone after the busy tone. with the unit being s. The default Optional value is FSK. value is 60. the Timeout (s) call is considered not answered. This item means the The value range Retransmiter time length of the MG is 1 to 254. is 1 to 254. with the unit being s. request to the MGC. value is 60. The default Double-click to type the howler tone time. Sets the caller ID Caller ID Mode display mode: the FSK mode or the DTMF mode. 2-21 . with the unit being ms. The Double-click to type the Optional minimum on-hook test time. The default Optional Double-click to type the busy tone time. is 90 to 2500. default value is 60. The value range is 1 to 254. No Answer Tone If a timeout expires. The value range Busy Tone Timeout (s) The time length of is 1 to 254. and All means reporting all events to the MGC in V21 mode. with playing the busy tone the unit being s. The value range OnHook Detect Time (ms) Polls about the test time length of the on-hook event. value is 60. The IAD CLI language. The threshold of subscribers that cannot register. The value range NGN Register Timer Threshold (s) The time threshold of is 1 to 3600. Users can select CLI Language Chinese or English. The default Double-click to type the Optional NGN register time threshold. Compulsory to select the keep-alive format. the value is 25. The default value is Optional Click the drop-down list to select the value. register exceeds the threshold set by this item. Users can send the keep-alive command in Notify or Click the drop-down list Includes Notify and Service Change. Disable. Property Configuration Method system will stop sending the transaction request. the MGC. Optional NGN register subscriber number threshold. Within the time threshold of the IAD NGN Register User Threshold registering to the MGC. Performs error EC Mode correction of certain errored packets. 2-22 Version: A . with the IAD registering to the unit being s. Service Change mode. Disable / Enable. an alarm will occur. The format of sending the keep-alive Alive format command. if the number of subscribers that cannot Double-click to type the The value range is 1 to 4096. AN5006-05 supports this function. Chinese / Now only the English Optional Click the drop-down list to select the value. value is 600.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Value Range / Description Requirement the set time expires. Optional Click the drop-down list to select the value. Parameter Parameter Name Profile Name Parameter Description Value Range / Requirement Property The name of the ONU voice port advanced configuraion — — profile. The silence compression Silence Switch function. G.711A / G. The default value is When this item set to Enable. Access method Right-click the designated system in the object tree of the object tree pane. Configuration Method Double-click to type the profile name.723 / G. Click the drop-down list to select the value. mute mode. Transparent / T.711U / Voice Code The speech encoding rule of G. It is used to reduce mute The default value is frames in the line and save Enable.38.711A.729 Mode the IAD.2 GUI Reference of a System 2. Optional Click the drop-down list to select the value. 2-23 . bandwidth resources. Echo Cancel Version: A Enables or disables the Disable / Enable. The default value is Optional Click the drop-down list to select the value. Fax Mode The encapsulation mode of the fax service. The parameters to be configured include fax mode. echo suppression. G. and input / output gain. and then select Config → Profile Definition → ONU POTS Advanced Configure Profile in the shortcut menu. Then the ONU POTS Advanced Configure Profile window will appear.7 Defining an ONU Voice Port Advanced Configuration Profile Command function The ONU voice port advanced configuraion profile is used to configure the parameters related to the voice and fax functions of an ONU voice port. Disable / Enable. The default value is Optional Transparent. echo suppression function.9. default value is 0. with the Gain (DB) telephone receiver. 2-24 Version: A . default value is Optional Click the drop-down list to select the value. the echo in the conversation will be cleared. with the (DB) microphone. The Optional Double-click to type the input gain. unit being dB.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Enable. Transparent. The Mode mode of the DTMF signal. Transparent / DTMF Selects the transmission RFC2833. The Optional Double-click to type the output gain. unit being dB. default value is 0. The value range is Output The output volume of the -32 to 32. The value range is Input Gain The input volume of the -32 to 32. and port property profile. Select the value in — Compulsory the Set Condition Object pane. and then select Config → Batch Configure → ONU Data Port Configure in the shortcut menu. ONU No. Enables / disables the data service port. 0 to 254. ONU port rate control profile. Access method Right-click the designated system in the object tree of the object tree pane. The parameters to be configured include port enabling status. Select the value in — Compulsory the Set Condition Object pane.2 GUI Reference of a System 2. The authorization number of the ONU. Parameter Parameter Name Parameter Description Value Range / Requirement Property containing the interface card that — Compulsory the ONU is connected with. Click the drop-down Enable / Disable.10. Then the ONU Data Port Configure window will appear. Method Select the value in The number of the slot Slot No. Enable/Disable MAC Limit Version: A The number of the PON port that is connected with the ONU. Select the value in — Compulsory the Set Condition Object pane. is Enable.1 Configuring an ONU Data Port Command function The ONU data port configuration command is used to configure rate control and operating mode of an ONU data port. The default value Compulsory value. list to select the Optional Double-click to type the maximum 2-25 . PON NO.10 Batch Configuration 2. Configuration the Set Condition Object pane. Is used to restrict the number of The value range is MAC address learned of a port. Port No. The subscriber port number of the ONU. addresses learned. Click the drop-down name that has been configured in the ONU port rate Optional list to select the value. Select a profile ONU Data Port Is used to configure the Property Profile operating mode of an ONU port. Click the drop-down Optional list to select the value. the total number of MAC addresses learned for all ports is 64. the number of MAC addresses learned for each port is 64. For an FTTH ONU.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method and the value here refers to the number of MAC maximum number of MAC addresses learned. 2-26 Version: A . control profile. for an FTTB ONU. ONU Port Rate Control Profile Is used to perform the rate Select a profile control of the uplink / downlink name that has data stream on an ONU port. so been configured in that this ONU port will not the ONU port rate occupy too much bandwidth. control profile. containing the interface card that the ONU is connected Select the value in the — Compulsory Select the value in the The number of the PON port that is connected with the — Compulsory ONU. Version: A Set Condition Object pane. The authorization number of the ONU. Select the value in the — Compulsory Set Condition Object pane. to 4085.2 Configuring ONU Data Service Command function The ONU data service configuration command is used to configure data services in a batch manner. The subscriber port number of the ONU. flow classification rule. binding with the service model profile and the SVLAN profile. The default Compulsory value is 33024. priority. with. Double-click to type the CVLAN ID. The value range is 0 to 65534. Parameter Parameter Name Parameter Description Value Range / Requirement Property The number of the slot Slot No. The value range is 0 CVLAN ID Set Condition Object pane. Select the value in the — Compulsory Set Condition Object pane. SVLAN. PON NO. Port No. Then the ONU Data Service Configure window will appear. 2-27 . Access method Right-click the designated system in the object tree of the object tree pane. and then select Config → Batch Configure → ONU Data Service Configure in the shortcut menu. The inner VLAN ID value.2 GUI Reference of a System 2.10. The default value is null. The CVLAN TPID value. The parameters to be configured include the CVLAN. CTPID The TPID value of the inner tag uses 0x8100 defined by the protocol. Configuration Method Compulsory Double-click to type the CVLAN TPID. ONU No. The value range is 0 to 4085. this Click the drop-down list to select the value. The TPID value of the TCOS translation VLAN. the local VLAN. When Translation TVID The post-translation VLAN ID. The TPID value of the TTPID Value Range / translation VLAN. The TPID value uses 0x8100 defined by the protocol. The default value is null. Configuration Method Double-click to type the priority value. Version: A . profile. Optional. parameter is valid. Its value should be SVLAN Name The service VLAN name in the local VLAN. value is null. The default value is 33024. When QinQ QinQ Profile Name Its value should be State is set The profile name configured selected in the profile to Enable in in the QinQ profile of the names configured in the service core switch card. Property Compulsory The value range is 0 to 65534. The default Optional value is 33024. Double-click to type the translation VLAN TPID. 2-28 The value range is 0 to 65534. State is set to Enable in Double-click to type the the service translation VID. The value range is 0 to 65534. The default of a packet in the PON. The TPID value of the STPID SVLAN. the QinQ profile of model the core switch card. Double-click to type the priority value. model profile. The TPID value uses 0x8100 defined by the protocol. Optional. Compulsory Double-click to type the SVLAN TPID. The default Optional value is 33024.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name CCOS Parameter Description Requirement The CVLAN priority value or The value range is 0 CVLAN CoS priority value to 7. selected in the VLAN names configured in Compulsory service VLAN data of Click the drop-down list to select the value. The TPID value uses 0x8100 defined by the protocol. this parameter is valid. binding with the softswitch platform interconnection parameter profile.3 Configuring ONU Voice Basic Items Command function The ONU voice basic configuration command is used to configure voice services in a batch manner. The parameters to be configured include the IAD IP address. The default value is Compulsory Click the drop-down list to select the value. The default Compulsory value is null. When the QinQ function is enabled.2 GUI Reference of a System Parameter Name Parameter Description Value Range / Requirement Property The value range is 0 SVID The outer VLAN ID value. the flow classification Optional Click the drop-down list to select the value. SCOS The SVLAN priority value or The value range is 0 SVLAN CoS priority value of to 7. rule tab. This profile is used to Service configure service type. to 4085. Non-TLS. Model Profile CVLAN mode. the TLS protocol. Its value should be selected in the profile names configured in Compulsory Click the drop-down list to select the value. value is null. Version: A 2-29 . and DHCP Option60 parameters of the ONU. Includes Non-TLS TLS Enable Whether the service uses and TLS. Its value should be Flow Is used to classify the selected in the rule Classification downlink data stream on the names configured in Rule ONU. profile.10. Its value should be selected in the profile names configured in Compulsory the service model Click the drop-down list to select the value. the SVLAN profile. 2. Double-click to type the priority value. translation. this profile is used SVLAN Model to add the SVLAN tag for the designated service of an ONU. and QinQ function. The default a packet in the PON. Compulsory Configuration Method Double-click to type the SVLAN ID. AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Right-click the designated system in the object tree of the object tree pane. and then select Config → Batch Configure → ONU Voice Basic Configure in the shortcut menu. The number of the PON PON NO. Parameter Parameter Parameter Value Range / Name Description Requirement Property Configuration Method The number of the slot Slot No. — the ONU will use Double-click to type the ONU the dynamically static public network IP configured IP address. The default value Compulsory Click the drop-down list to select the value. connected with. When IP Config Mode is set to pppoe or dhcp. is static. Its value should be IAD Softswitch Profile ID The name of the softswitch platform interconnection parameter profile. interconnection parameter profile. ONU No. static / pppoe / dhcp. Select the value in the Set Condition Object pane. port that is connected with the ONU. IP Config Mode Selects the IP configuration mode of the IAD. The authorization number of the ONU. ONU Static Public IP The static public network IP address of the ONU. Then the ONU Voice Basic Configure window will appear. containing the interface card that the ONU is — Compulsory — Compulsory — Compulsory Select the value in the Set Condition Object pane. Compulsory. address to overwrite the configured static public network 2-30 Version: A . Select the value in the Set Condition Object pane. selected in the profile names configured in the Compulsory softswitch platform Click the drop-down list to select the value. DHCP Option60 Value Version: A The identifier postfix of Optional DHCP Option60. Double-click to type the ONU — Optional static public network IP gateway. Optional.2 GUI Reference of a System Parameter Parameter Value Range / Name Description Requirement Property Configuration Method IP address.255. The default value is Disable. 2-31 . is 255.0. Optional. ONU Static Public IP Mask ONU Static Public IP Gateway The static public IP The default mask mask of the ONU. When IP Config PPPoE User The name of the Name PPPoE subscriber. parameter is valid. this select the value. — Mode is set to Double-click to type the pppoe. this proper IP address for parameter is the IAD. Enables / disables the Optional DHCP Option60 DHCP Option60 Enable function. the system will Enable / Disable. Compulsory Double-click to type the ONU static public network IP mask. — Mode is set to Double-click to type the pppoe. parameter is valid. this PPPoE user name. When IP Config PPPoE The password of the Password PPPoE subscriber. but this parameter must be configured. Double-click to type the identifier postfix of DHCP Option60. this PPPoE password. parameter is valid.0. The When IP Config DHCP server uses this Mode is set to parameter to assign a — dhcp. The static public IP gateway of the ONU. transmit DHCP packets with Option60. When the DHCP Option60 function is enabled. valid. When IP Config Mode is set to Click the drop-down list to dhcp. and parameters related to the SIP protocol. Configuration Method Set Condition Object pane. VLAN IDs.4 Configuring an ONU Voice Port Command function The ONU voice port configuration command is used to configure voice ports of a voice service ONU in a batch manner. and then select Config → Batch Configure → ONU POTS Configure in the shortcut menu.AN5516-06 Optical Line Terminal Equipment GUI Reference 2. The default value is Compulsory null. PON NO.10. Access method Right-click the designated system in the object tree of the object tree pane. ONU No. with. Port No. containing the interface card that the ONU is connected Select the value in the — Compulsory Select the value in the The number of the PON port that is connected with the — Compulsory ONU. Click the drop-down list to select the value. Enables / disables the voice port. Compulsory Double-click to type the telephone number. Select the value in the — Compulsory Set Condition Object pane. Select the value in the — Compulsory Set Condition Object pane. Set Condition Object pane. The parameters to be configured include the telephone numbers of the ONU. Enable / Disable. of the system. Parameter Parameter Name Parameter Description Value Range / Requirement Property The number of the slot Slot No. The subscriber port number of the ONU. Then the ONU POTS Configure window will appear. The internal logical number Phone No. number defined by the 2-32 Version: A . Port Enable The authorization number of the ONU. end point subscribers. binding with the advanced configuration profile of the ONU voice port. It does not The value range is 0 refer to the actual telephone to 99999999. Signalling Service Name Is used to identify the name of the NGN voice service VLAN of a user at the OLT side. this SVLAN ID. parameter is valid. Optional. the value range of this Compulsory Double-click to type the signaling VLAN ID. The default value is null. advanced configuration profile. Its value should be selected in the Voice Port Profile ID The name of the voice port profile names advanced configuration configured in the profile. of this parameter. When SVLAN State is set to Double-click to type the Enable. protocol does — not need configuration Double-click to type the endpoint domain name. Optional. Users can configure this parameter as the actual telephone number defined by the softswitch. and is only used to configure indexes inside the system. to Disable. Its value should be selected in the service VLAN Compulsory names configured in Click the drop-down list to select the value. The value range is 0 SVLAN ID The outer VLAN ID value. Enable / Disable. The SIP Endpoint Domain Name The domain name of the gateway. ONU voice port Compulsory Click the drop-down list to select the value. parameter is 1 to 4085. Version: A 2-33 . SVLAN Enables / disables to add the State SVLAN. to 4085. the local VLAN data. Compulsory Click the drop-down list to select the value.2 GUI Reference of a System Parameter Name Parameter Description Value Range / Requirement Property Configuration Method softswitch. When SVLAN Enable State is set SignalVLAN ID The voice signaling VLAN ID. service name. When the SIP User Password The password authenticated by the SIP terminal and the SIP register server.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The value range is 1 to 65535.248 / MGCP Double-click to type the protocol is SIP protocol used. the default Compulsory Double-click to type the ONU protocol port. the value of this default value is 2427.248 protocol is used. number. is used. value is 2427. does not need configuration. the default value is 5060. H. 2-34 Version: A . according to the If the H. does not need configuration.248 / MGCP Double-click to type the protocol is SIP protocol used. The ONU protocol port. this User Name/ parameter refers to the TID SIP name. this item authenticated password.248 protocol is parameter is 2944. this item authenticated user name. When the SIP protocol telephone is used. the default MGCP protocol is used. if SIP protocol is used. When the SIP User Name The user name authenticated by the SIP terminal and the — SIP register server. to the subscriber telephone Double-click to type the — Compulsory endpoint user name / SIP telephone number. and users can ascertain the protocol type ONU Protocol Port NO. When the H. if the used. this parameter refers No.248 / MGCP Endpoint protocol is used. if the SIP protocol is used. Optional. If the the default value of this H. — H. Optional. if the parameter is 2944. the the MGCP protocol default value is 5060. Compulsory Compulsory Compulsory Configuration Method Select the value in the Set Condition Object pane. containing the interface card Compulsory that the ONU is connected with. Select the value in the Set Condition Object pane.2 GUI Reference of a System 2. Click the drop-down list to select a bandwidth profile as required. Parameter Parameter Name Parameter Description Property The number of the slot Slot No. ONU No. Bandwidth Profile Name The number of the PON port that is connected with the ONU.5 Configuring an ONU Command function The ONU configuration command is used to bind an ONU with the designated bandwidth profile. Then the ONU Config window will appear.10.6 Activating an ONU Voice Port Command function The ONU voice port activation command is used to activate a voice port of the destigated ONU. Select the value in the Set Condition Object pane. GPON Service The name of the GPON service Bandwidth bandwidth profile. PON No. Version: A 2-35 . Profile 2. Compulsory Click the drop-down list to select a GPON service bandwidth profile as required. The authorization number of the ONU. and then select Config → Batch Configure → ONU Config in the shortcut menu. Access method Right-click the designated system in the object tree of the object tree pane.10. The name of the bandwidth profile. AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Right-click the designated system in the object tree of the object tree pane. 2-36 Version: A . Select the value in the Set Condition Object pane. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The number of the slot Slot No. that is connected with the ONU. The number of the PON port PON No. Port No. The voice port number of the ONU. port is activated. and then select Config → Batch Configure → ONU Voice Port Activation in the shortcut menu. Users can Includes provision voice services on a Activate and certain port only when this Deactivate. Select the value in the Set Condition Object pane. connected with. Compulsory Click the drop-down list to select Activate or Deactivate. Activates or deactivates an Port Activation ONU voice port. ONU No. Select the value in the Set Condition Object pane. containing the PON interface card that the ONU is — Compulsory — Compulsory — Compulsory — Compulsory Select the value in the Set Condition Object pane. Then the ONU Voice Port Activation window will appear. The authorization number of the ONU. The actual alarm item defined on the ONU. such as the fire alarm. Defining a Threshold Configuration Profile Command function The threshold configuration profile definition command is used to configure the performance threshold profile of the designated object. the water alarm.2 GUI Reference of a System 2. In the left pane of the Custom Alarm Manage window. select a certain ONU. and click the Add button to customize the user defined alarms.11 Managing Alarms 2. Then the Custom Alarm Manage window will appear. and then select Custom Alarm Manage in the shortcut menu.11. Parameter Parameter Name Parameter Description Equipment Name The name of the selected Default The default alarm name of Alarm Name the ONU. Version: A 2-37 . and the overhigh / overlow temperature alarm. Alarm English Name 2. Value Range / Property Configuration Method — Read-only — — Read-only — — Compulsory Requirement Click the drop-down list to select the alarm name. Access method Right-click the designated system in the object tree pane.2 ONU.1 Managing User Defined Alarms Command function The user defined alarm management command is used to define environment related alarms of the equipment.11. The applicable object hierarchy of the Object designated performance Includes ONU and threshold profile. Now the ONU and be set to ONU. When Object Type is set to ONU. and Down BIP8 Alarm Threshold. Alarm Code The name of an alarm. Now the ONU Port. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method It can be composed of The name of the Profile Name performance threshold profile. be set to ONU Port. Compulsory Click the drop-down list to select the alarm code. Compulsory Click the drop-down list to select the object hierarchy. letters. Port. maximum length is 20 characters. ONU and the ONU port support this function. Then the Threshold Profile window will appear. Includes ONU and Object Type The applicable object type ONU Port. the value of this item can be set to Internal Temperature High. and the Compulsory Double-click to type the profile name. or underlines. 2-38 Version: A . Up BIP8 Alarm Threshold. of the designated When Object is set to performance threshold ONU. and then select Config → Profile Definition → PM Threshold Profile in the shortcut menu. this item must Compulsory Click the drop-down list to select the object type. When the ONU port support this Object is set to ONU function. digital numbers. Internal Temperature Low.AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Right-click the designated system in the object tree of the object tree pane. this item must profile. Alarm Report Threshold Range The range of the threshold value for alarm reporting. Clearing Alarm Threshold When a detected physical quantity reaches the set threshold. Bias Current High. Bias Voltage High. Double-click to type the alarm clear threshold. Tx Optical Power Lower. Alarm Threshold Switch Enables / disables the Includes Enable and alarm threshold function. Clearing Alarm The range of the alarm Threshold clear threshold. Compulsory Click the drop-down list to select Enable or Disable. the value of this item can be set to Rx Optical Power High. — Read-only — — Read-only — Range Unit Version: A The unit of the alarm 2-39 . Tx Optical Power High. Temperature High. the system will stops reporting the A measurement carried to two decimal Compulsory places. will be reported. When a Alarm Report detected physical quantity Threshold reaches the set threshold. Disable. Bias Voltage Low. Bias Current Low.2 GUI Reference of a System Parameter Name Parameter Description Value Range / Requirement Property Configuration Method When Object Type is set to ONU Port. corresponding alarm. Rx Optical Power Lower. — Read-only — The alarm clear threshold. the corresponding alarm A measurement carried to two decimal Compulsory places. Double-click to type the alarm report threshold. and Temperature Low. The alarm reporting threshold. 3 Binding an Object with a Profile Command function The object binding command is used to bind a certain object with a performance threshold profile.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method threshold. Then the PM Threshold Profile Binding window will appear. Access method Right-click the designated system in the object tree of the object tree pane. select Unbind. threshold profile. If it is needed to bind an object with the Click the drop-down list performance threshold profile. select the name of Includes the name of Template the created performance the created Name threshold profile. 2. with the performance to select the name of Compulsory the created performance threshold profile to be bound or Unbind.11. If it is not performance threshold needed to bind an object profile and Unbind. Parameter Parameter Name Parameter Description Value Range / Property Configuration Method — Read-only — — Read-only — Requirement Information of all objects Object Name under the designated system. 2-40 Version: A . and then select Config → Profile Definition → PM Threshold Profile Bind in the shortcut menu. Object Type Types of all objects under the designated system. and includes the following sections. Performing ONU authentication Configuring a service VLAN Configuring VLAN properties Adding a port to a VLAN Configuring voice service Configuring multicast service Configuring a profile Configuring QinQ Configuring QoS Managing a DBA Profile Configuring DHCP Configuring clock Configuring PON port protection Managing uplink function System security management User security management Aging MAC addresses Replacing an ONU ONU bridge management Configuring signaling tracing Version: A 3-1 .3 GUI Reference of the HSWA Card This chapter discusses operation commands of the AN5516-06 HSWA card in detail. AN5516-06 Optical Line Terminal Equipment GUI Reference Configuring a smart grid server Configuring network management parameters Alarm and performance data management Time management Upgrade and backup operation Reset operation Log operation Forced active / standby switch Viewing system information 3-2 Version: A . PHISIC-ID+Password Version: A Click the drop-down Compulsory list to select the value. the GPON authentication mode includes: non-authentication.3 GUI Reference of the HSWA Card 3. 3-3 . The number of the PON PON port port that is connected with the ONU. Users can select one of the Authentication The authentication mode following values: PHISIC-ID Mode of the designated ONU.1 Performing ONU Authentication 3. physical identifier / logical identifier mixed authentication.1. physical identifier + password authentication. and physical identifier / logical identifier mixed authentication (without the password). Then the PON Authentication Mode window will appear. logical identifier authentication. Read-only — Method The number of the slot Slot No.1 Configuring Authentication Mode of a PON Port Command function The PON port authentication mode configuration command is used to configure the authentication mode of each PON port on a certain interface card. Parameter Parameter Name Parameter Description Configuration Value Range / Requirement Property The value range is 11 to 16. Authentication. non-authentication. logical identifier authentication (without the password). The authentication modes can be classified into the EPON authentication mode and the GPON authentication mode. and then select Config → ONU Authentication → PON Authentication Mode in the shortcut menu. Access method Right-click the HSWA card in the object tree of the object tree pane. containing the PON interface card that the ONU is connected with. Read-only — The value range is 1 to 8. and password authentication. physical identifier authentication. The EPON authentication mode includes: physical identifier authentication. The ONUs in the physical identifier whitelist will be authorized under any one of the following conditions: The authentication mode of an EPON ONU is physical identifier authentication. NO Authentication. and PHISIC-ID/LOGIC-ID Mixed Authentication (No Password). LOGIC-ID Authentication (No Password). the authentication mode of a GPON ONU is physical identifier authentication or physical identifier + password authentication. physical address / logical identifier mixed authentication. Password Authentication LOGIC-ID Authentication. PHISIC-ID/LOGIC-ID Mixed Authentication. Access method Right-click the HSWA card in the object tree of the object tree pane. The default value is PHISIC-ID Authentication. and then select Config → ONU Authentication → ONU Physic-IDaddress Whitelist in the shortcut menu.1.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Authentication. 3. 3-4 Version: A . Then the Physical Address White List Setting window will appear. or physical identifier / logical identifier mixed authentication (without password).2 Setting Physical Identifier Whitelist of an ONU Command function The ONU physical identifier whitelist setting command is used to set the physical identifier authentication whitelist of an ONU. Compulsory with the ONU drop-down list to select the value. a to an ONU. — Compulsory drop-down list to select the value. Version: A 3-5 . The physical f. When the physical address / logical identifier Password The password is used in mixed the physical address / authentication logical identifier mixed of an EPON authentication of an ONU or the Double-click to physical type the physical identifier + identifier + password. authentication EPON ONU and the — of a GPON ONU is used. the range from 0 to 9. If the physical SN is used. and SN identifier of this ONU.3 GUI Reference of the HSWA Card Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method If the MAC address is used. Compulsory select the value. Click the ONU Type The type of the ONU. a to f. The number of the PON PON No. this item is valid and needs configuration. password mixed password authentication of a mixed GPON ONU. the last eight bits should be in Double-click to Compulsory type physical identifier. containing the PON interface card that the Click the The value range is 11 to 16. identifier of an ONU can the value range is described be either the MAC as follows: The first four bits address or the physical should be fixed strings. Physical ID The physical identifier of the value range is 0 to 9. port that is connected drop-down list to Click the The value range is 1 to 8. The number of the slot Slot No. ONU is connected with. Optional. valid and needs Optional Double-click to type the password. non-Implemented 3. The number of the slot Slot No. that is connected with the Click the The value range is 1 to 8. drop-down list to drop-down list to select the value. Access method Right-click the HSWA card in the object tree of the object tree pane. Compulsory ONU ONU Type 3-6 The type of the ONU. Compulsory select the value. configuration. Implemented The authorization status Implemented / Status of the ONU. and then select Config → ONU Authentication → ONU Password Whitelist in the shortcut menu. the ONUs in the password whitelist will be authorized.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name ONU No. When the authentication mode of an ONU is password authentication. Parameter Description The authorization number of the ONU. Then the Password White List Setting window will appear. is connected with. The number of the PON port PON No. containing the PON interface card that the ONU Click the The value range is 11 to 16. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method When the authentication Password The password is used in the mode is password password authentication of authentication. Value Range / Requirement Configuration Method Double-click to The value range is 1 to 128. — Compulsory Click the drop-down list to Version: A .1. Compulsory type the ONU number.3 Property Read-only — Setting Password Whitelist of an ONU Command function The ONU password whitelist setting command is used to set the password authentication whitelist of an ONU. this item is a GPON ONU. 3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property Configuration Method select the value. ONU No. The authorization number of the ONU. Double-click to The value range is 1 to 128. type the ONU number. Implemente The authorization status of Implemented / d Status the ONU. non-Implemented 3.1.4 Compulsory Read-only — Setting Logical Identifier Whitelist of an ONU Command function The ONU logical identifier whitelist setting command is used to set the logical identifier authentication whitelist of an ONU. When the authentication mode of an ONU is logical identifier authentication or mixed authentication, the ONUs in the logical identifier whitelist will be authorized. Access method Right-click the HSWA card in the object tree of the object tree pane, and then select Config → ONU Authentication → ONU SN: LOID Logic SN Whitelist in the shortcut menu. Then the Logical SN Whitelist List Setting window will appear. Parameter Parameter Name Logical ID Parameter Description The logical identifier of the ONU. Value Range / Requirement — Property Compulsory Configuration Method Double-click to type the logical identifier. When the authentication Password The logical identifier password of the ONU. mode is logical identifier authentication (with Optional Double-click to type the password. password), this item is valid and needs configuration. The number of the slot Slot No. containing the PON interface card that the Click the drop-down The value range is 11 to 16. Compulsory value. ONU is connected with. PON No. Version: A The number of the PON list to select the The value range is 1 to 8. Compulsory Click the drop-down 3-7 AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method port that is connected with list to select the the ONU value. Click the drop-down ONU Type The type of the ONU. — Compulsory list to select the value. ONU No. The authorization number of the ONU. The value range is 1 to 128. Implemented The authorization status of Implemented / Status the ONU. non-Implemented 3-8 Compulsory Read-only Double-click to type the ONU number. — Version: A 3 GUI Reference of the HSWA Card 3.2 Configuring a Service VLAN 3.2.1 Configuring a Local VLAN Command function The local VLAN configuration command is used to configure the range of the service VLAN ID on an uplink port, so as to restrict the service VLANs through this uplink port. Access method Right-click the HSWA card in the object tree of the object tree pane, and then select Config → Local VLAN in the shortcut menu. Then the Local End Service VLAN window will appear. Parameter Parameter Name Parameter Description Value Range / Requirement Property The service name must be Service The name of the service VLAN for composed of English Name an uplink port of the AN5516-06. letters, numbers, or Starting VLAN ID The value range is 1 to service VLAN for an uplink port of 4085, and the value of Method Double-click to Compulsory type the service name. underlines. The starting ID number of the Configuration Double-click to type the Compulsory starting ID the AN5516-06. Starting VLAN Starting VLAN ID must ID is used to set the convergence not exceed that of VLAN number of the domain for the uplink SVLAN. ID End. service VLAN. The value range is 1 to Double-click to 4085, and the value of type the The ending ID number of the service VLAN for an uplink port of the AN5516-06. The value of VLAN ID End Starting VLAN ID must not exceed that of VLAN ID End. VLAN ID End is used to set the convergence domain for the Starting VLAN ID must Compulsory ending ID not exceed that of VLAN number of the ID End. service VLAN. uplink SVLAN. Version: A 3-9 AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property TRUNK group number of the Method Click the Sets the uplink port number or Interface No. Configuration — Compulsory uplink service VLAN. drop-down list to select the value. Sets the tag processing mode of the uplink service VLAN. For this parameter, TAG indicates adding the VLAN tag, and UNTAG indicates not adding the VLAN tag. In UNTAG mode, the tag of an uplink packet will be stripped automatically when the packet passes through the port, and the Click the untagged packet will be TAG/UNTAG transferred in the uplink direction TAG / UNTAG Compulsory continuously. drop-down list to select the value. In TAG mode, an uplink packet will not be processed, and will be transferred in tagged mode in the uplink direction continuously. In an uplink port, only one service VLAN can be set to UNTAG, and its Starting VLAN ID and VLAN ID End must have the same value. Under other conditions, users must select TAG. The service types to be selected include: 1. data Service Type The type of the service VLAN for an uplink port of the AN5516-06. Click the 2. iptv 3. ngn 4. voip 5. vod Compulsory drop-down list to select the value. 6. cncview 7. system 3-10 Version: A 3 GUI Reference of the HSWA Card 3.3 Configuring VLAN Properties Command function The VLAN properties configuration command is used to create a VLAN bearing data services. Note: If the local VLAN has been configured, the configured VLAN ID and service type will be displayed in the VLAN property configuration GUI directly. Access method Right-click the HSWA card in the object tree pane, and then select Config → VLAN Arribute Config in the shortcut menu. Then the Vlan Arribute Config window will appear. Parameter Parameter Name VLAN ID Parameter Description The VLAN ID value to be added. Value Range / Requirement The value range is 4088 or 1 to 4085. Property Configuration Method Double-click to Compulsory type the VLAN ID value. Selects the number of service virtual ports. Vlan Type SIN means adding one service virtual port; Click the SIN / MUL Compulsory drop-down list to select the value. MUL means adding multiple service virtual ports. Selects the operating mode of the VLAN. VLAN COMMON means that the Mode VLAN-related service virtual ports are only used to perform operations of Click the COMMON / QinQ Compulsory drop-down list to select the value. outer tags (in single-tagged mode). Version: A 3-11 AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method QinQ means that the VLAN-related service virtual ports can be used to perform operations of double tags (SVLAN+CVLAN in double-tagged mode). The service types to be selected include: 1.data Service The type of the service VLAN for an Type uplink port of the AN5516-06. Click the 2.iptv 3.ngn Compulsory 4.voip drop-down list to select the value. 5.vod 6.cncview 7.system Click the VLAN Role Selects the role of the VLAN. General VLAN / Super VLAN Compulsory drop-down list to select the value. 3-12 Version: A 3 GUI Reference of the HSWA Card 3.4 Adding a Port to a VLAN Command function The adding-port-to-VLAN command is used to add a line interface card to the configured local VLAN. Note: When Slot Bind Mode in the local VLAN configuration GUI is set to Manual, the operations mentioned in Section 3.4 are valid. Access method Right-click the HSWA card in the object tree pane, and then select Config → Add Slot Port to VLAN in the shortcut menu. Then the Add Slot Port to VLAN window will appear. Parameter Parameter Name Parameter Description Value Range / Requirement Property the line interface card to be added The value range is 11 to 16. Compulsory to the designated local VLAN. Port No. Method Click the The number of the slot containing Slot No. Configuration drop-down list to select the value. The port number of the line Its value range depends on interface card to be added to the the corresponding line designated local VLAN. interface card. Click the Compulsory drop-down list to select the value. The value range is 4088 or 1 to 4085. Its value should Starting VLAN ID The VLAN ID value of the local be the same as that of VLAN that the line interface card VLAN ID End, and the will be added to. VLAN IDs should be configured in the Local End Double-click to Compulsory type the starting VLAN ID. Service VLAN window. Version: A 3-13 AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The value range is 4088 or 1 to 4085. Its value should VLAN ID End The VLAN ID value of the local be the same as that of VLAN that the line interface card Starting VLAN ID, and the will be added to. VLAN IDs should be Double-click to Compulsory type the ending VLAN ID. configured in the Local End Service VLAN window. Click the TAG/UNTAG Sets the tag processing mode of the VLAN. TAG / UNTAG Compulsory drop-down list to select the value. 3-14 Version: A 3 GUI Reference of the HSWA Card 3.5 Configuring Voice Service 3.5.1 Configuring a NGN Uplink Port Command function The NGN uplink port configuration command is used to configure the parameters in the ONU voice services, and these parameters are related to communications with the softswitch platform. Access method Right-click the HSWA card in the object tree of the object tree pane, and then select Config → Voice Config → NGN Interface in the shortcut menu. Then the NGN Interface window will appear. Parameter Parameter Name Signalling Service Name Parameter Description Is used to identify the name of the NGN voice service VLAN of a user at the OLT side. Value Range / Requirement Property configured in the local Compulsory to select the Click the softswitch platform. The AN5516-06 supports three drop-down list value. VLAN data. The protocol type of the Protocol Type Method Click the Select from the service VLAN names Configuration MGCP / H.248 / SIP Compulsory types of NGN protocols: drop-down list to select the value. MGCP, H.248, and SIP. Compulsory. When the SIP MGC1 IP Address/Standby Address 1 of the softswitch SIP Register platform. Server Address protocol is Double-click to It should be configured used, the port type address 1 as an IP address or number should of the domain name. be the address softswitch of the standby platform. SIP register server. Version: A 3-15 AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The value range is 1024 to 65535. When the H.248 protocol is used, the default port number is MGC1 2944; Double-click to When the MGCP type the port Port/Standby SIP The port number of the protocol is used, the Register Server softswitch platform protocol. default port number is Address Compulsory number of the softswitch 2727; platform When the SIP protocol protocol. is used, the port number should be the port number of the standby SIP register server. It should be configured as an IP address or Double-click to domain name. MGC2 IP Address/Standby Address 2 of the softswitch When the SIP protocol SIP Proxy Server platform. is used, the port type address 2 Compulsory softswitch number should be the Address of the platform. address of the standby SIP register server. The value range is 1024 to 65535. When the H.248 protocol is used, the default port number is MGC2 Port/Standby SIP The port number of the Proxy Server softswitch platform protocol. Address Double-click to 2944; type the port When the MGCP protocol is used, the default port number is 2727; When the SIP protocol Compulsory number of the softswitch platform protocol. is used, the port number should be the port number of the standby SIP register 3-16 Version: A 3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property Configuration Method server. It should be configured as an IP address or Double-click to domain name. MGC3 Address Address 3 of the softswitch When the SIP protocol platform. is used, the port type address 3 Compulsory of the softswitch number should be the platform. address of the standby SIP register server. The value range is 1024 to 65535. When the H.248 protocol is used, the default port number is MGC3 Port 2944; Double-click to When the MGCP type the port The port number of the protocol is used, the softswitch platform protocol. default port number is Compulsory number of the softswitch 2727; platform When the SIP protocol protocol. is used, the port number should be the port number of the standby SIP register server. The values include Disable, Enable The heartbeat function is used to check whether communication between the MG and the MGC is normal. Keep-alive When this function is enabled, if communication between the MG and the MGC fails, the ANM2000 will display the corresponding alarm. Active, and Enable Passive. The default value is Disable. Click the Disable: Disables the heartbeat function. Enable Active: The MG sends the Compulsory drop-down list to select the value. heartbeat command to the MGC automatically. Enable Passive: The MGC sends the heartbeat command to Version: A 3-17 the previously-configured static IP addresses will be invalid. When the Double-click to H.248 and number of the default value is 5060. server.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method the MG. Enables / disables the DHCP function. 3-18 Optional. Master DNS Server If the MGC address is in Double-click to domain name mode. SIP Register The port number of the SIP Server Port register server. users type the IP need to configure the IP — Optional master DNS address of the master DNS server.248 and type the IP It should be configured MGCP address or as an IP address or protocols are domain domain name. Optional. The H. Click the Compulsory drop-down list to select the value. addresses in DHCP mode. MGCP SIP register protocols are server. Double-click to The value range is When the type the port 1024 to 65535. at the same time. SIP Register The address of the SIP register Server Address server. configuration. Version: A . used. Double-click to If the MGC address is in Slave DNS domain name mode. When the DHCP function is enabled. The designated uplink port will default value is obtain the public network IP Disable. this address of the parameter SIP register does not need server. and the MGC checks whether the heartbeat command is received. all ONUs using the DHCP configuration data of the Enable / Disable. server. users can Server configure the IP address of the address of the type the IP — Optional address of the slave DNS slave DNS server. Optional. this parameter does not need configuration.248 and type the IP It should be configured MGCP address or as an IP address or protocols are domain domain name. When the H. H. Optional. The value range is 120 MGCP to 86400. configuration. Optional. used. configuration. this SIP proxy parameter server. this parameter does not need Double-click to type the register refresh time of the SIP protocol. SIP Proxy Server The address of the SIP proxy Address server. used. The default protocols are value is 3600. When the SIP Proxy Server The port number of the SIP Port proxy server. does not need configuration. used.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property Configuration Method used. The protocols are number of the default value is 5060.248 and Double-click to The value range is MGCP type the port 1024 to 65535.248 and SIP Expire (s) SIP registration refresh interval. this address of the parameter SIP proxy does not need server. When the Double-click to H. Version: A 3-19 . PON Port No. select Config → Voice Config → PPPoE with NGN Uplinked in the shortcut menu. ONU. When this parameter is set to PPPoE Enable Enable. The default value is Click the Compulsory drop-down list to select the value. MGC. users do not need to perform the NGN uplink PPPoE configuration command. The number of the PON port that is The value connected with the ONU. range is 1 to 8. The authorization number of the ONU. the PPPoE connecting function of the designated ONU (IAD) will be enabled to obtain the IAD IP address for communication with the Enable / Disable. Double-click to When PPPoE type the name of Version: A . range is 1 to Compulsory authorization number of the 128. 16. Parameter Parameter Name Slot No. — Optional. Property Configuration Method Double-click to Compulsory type the slot number. Parameter Description Value Range / Requirement The number of the slot containing the The value interface card that the ONU is range is 11 to connected with. Double-click to Compulsory type the PON port number. PPPoE User Name 3-20 The name of the PPPoE subscriber.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. If the ONU uses the static IP address or obtains the IP address dynamically in DHCP mode.5. Access method Right-click the HSWA card in the object tree pane. and click the PPPoE with NGN Uplinked tab. Then the PPPoE with NGN Uplinked window will appear. Enables / disables the PPPoE function. Disable. Double-click to type the The value ONU No.2 Configuring NGN Uplink PPPoE Command function The NGN uplink PPPoE configuration command is used to configure an ONU to obtain the IAD IP address dynamically in PPPoE mode. — When PPPoE Double-click to Enable is set to type the password Disable.5. the local VLAN data.3 Configuring NGN Uplink Subscriber Data Command function The NGN uplink subscriber data configuration command is used to configure the local media gateway parameters of the voice service on an ONU. this subscriber. invalid. Telephone Number Version: A The internal logical number of the The value range system. and click the NGN Configuration Config tab. Then the NGN Configuration window will appear. 3. PPPoE User The password of the PPPoE Password subscriber. parameter is invalid. this of the PPPoE parameter is subscriber. Optional. Access method Right-click the HSWA card in the object tree. configured in Click the Compulsory drop-down list to select the value. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Its value should be selected in Signalling Service Name Is used to identify the name of the the service NGN voice service VLAN of a user at VLAN names the OLT side. It does not refer to the actual is 0 to telephone number defined by the 99999999. Double-click to Compulsory type the telephone 3-21 . select Config → Voice Config → NGN Configuration in the shortcut menu.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Enable is set to the PPPoE Disable. AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement softswitch. 16 characters not included). When the MGC uses the Domain SIP protocol.255. Double-click to used. Its default value is 255. and is only used to Users can configure indexes inside the system. Double-click to When the DHCP or PPPoE function is ONU Public IP enabled. If the H. Compulsory type the ONU protocol port number. Double-click to ONU Public IP The public network IP mask of the Subnet ONU. but this parameter must be configured. configure this Users can configure this parameter parameter as as the actual telephone number the actual defined by the softswitch.0. The static public network IP address of the ONU. this parameter should be Postfix set to the user name suffix (the first Double-click to — Optional type the domain name / SIP username postfix. Double-click to ONU Public IP The public network IP gateway of the Gateway ONU. the The ONU protocol port number. number defined by the softswitch. — Compulsory type the public network IP mask of the ONU. the ONU will use the dynamically configured IP address to type the public — Compulsory network IP address of the overwrite the system-configured ONU.248 protocol is ONU Protocol Port No. If the MGCP 3-22 Version: A . The domain name address of the Endpoint gateway. default value of this parameter is 2944. if the SIP authentication Name/SIP user name is longer than 16 User Name characters. public network IP address.0. telephone Property Configuration Method number. type the public — Compulsory network IP gateway of the ONU. 4 Configuring NGN Uplink DHCP Command function The NGN uplink DHCP configuration command is used to configure an ONU to obtain the IP address of voice service in DHCP mode with Option 60. SIP User Password The password authenticated by the SIP terminal and the SIP register — server. the default value is 5060. configuration. When the Double-click to H. this parameter refers to the telephone subscriber telephone number.248 / MGCP type the SIP protocol is protocol used. Telephone No. number. this item authenticated does not need password. SIP User Name The user name authenticated by the SIP terminal and the SIP register — server. when the SIP protocol is used. Optional. When the H. this item authenticated does not need user name. 3. configuration.248 / MGCP protocol is Double-click to Endpoint User used.248 / MGCP type the SIP protocol is protocol used.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property Configuration Method protocol is used. When the Double-click to H. Version: A 3-23 .5. the default value is 2427. — Compulsory user name / SIP Optional. If the SIP protocol is used. this parameter refers to the TID type the endpoint Name/ SIP name. and click the DHCP with NGN Uplinked tab. Version: A . The default value is Click the drop-down Optional value. Enables / disables the DHCP function. Property Compulsory The authorization number of the ONU. range is 1 to Method Double-click to type the slot number. 16. Enables / disables the DHCP DHCP Option60 function.AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Right-click the HSWA card in the object tree of the object tree pane. the authorization number of the ONU. IP address. Double-click to type Compulsory the PON port number. Then the DHCP with NGN Uplinked window will appear. DHCP Enable When the DHCP function is enabled. list to select the Double-click to type Optional the identifier postfix of DHCP Option60. Parameter Description Value Range / Requirement The number of the slot containing the The value interface card that the ONU is range is 11 to connected with. The configured IP address to overwrite the default value is previously configured public network Disable. DHCP Option60 Value 3-24 Enable / Disable. PON Port No. Configuration Double-click to type Compulsory 128. Option60 When the DHCP Option60 function is Enable enabled. select Config → Voice Config → DHCP with NGN Uplinked in the shortcut menu. range is 1 to 8. The maximum The identifier postfix of DHCP allowed length Option60. Disable. Enable / the ONU will use the dynamically Disable. The number of the PON port that is The value connected with the ONU. the system will transmit DHCP packets with Option60. Parameter Parameter Name Slot No. The value ONU No. of the typed string is 32 bits. Click the drop-down Compulsory list to select the value. failed. and click the Keep Alive tab.3 GUI Reference of the HSWA Card 3. Version: A 3-25 . the system will consider that communication with the MGC has The value range is 1 to 120. The default value is 3. The maximum timeout times of the IAD sending the heartbeat message to the MGC. Then the Keep Alive window will appear. Double-click to type 1 to 43200.5 Configuring NGN Heartbeat Parameters Command function The NGN heartbeat parameter configuration command is used to configure the heartbeat interval and heartbeat timeout times controlled by the media gateway of the voice service on an ONU. The default value is 30. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Its value should be Signalling Service Name Is used to identify the name of the NGN voice service VLAN of a user at the OLT side. The value range is Alive Interval The transmission period of the (s) heartbeat message. If the actual timeout Alive Times times exceed the set threshold value. select Config → Voice Config → Keep Alive in the shortcut menu. Compulsory the heartbeat interval.5. Double-click to type Compulsory the heartbeat time-out times. selected in the service VLAN names configured Click the drop-down Compulsory list to select the value. and the IAD will register to the standby MGC. Access method Right-click the HSWA card in the object tree of the object tree pane. with the unit being s. in the local VLAN data. Double-click to type the interval NGN The interval of the equipment The value range is 1 to 3600. Register registering to the NGN with the unit being s.5. default value is 30. Access method Right-click the HSWA card in the object tree of the object tree pane. default value is 30. select Config → Voice Config → NGN Register Configuration in the shortcut menu. Double-click to NGN The interval of the equipment The value range is 1 to 7200. Register sending the register packets with the unit being s. of the equipment Compulsory sending the register packets to the NGN platform. Double-click to NGN The number of the register Register packets sent to the NGN Packets platform by the equipment.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. The default value is 0. — Compulsory drop-down list to select the service name. Compulsory of the register packets sent to the NGN platform by the equipment. 3-26 Version: A . type the number The value range is 0 to 120. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Click the Service The name of the created Name NGN voice service. Then the NGN Register Configuration window will appear.6 Configuring NGN Register Parameters Command function The NGN register parameter configuration command is used to configure the related parameters of the register packet sent to the NGN platform. and click the NGN Register Configuration tab. type the interval Compulsory of the equipment registering to the NGN platform. The Interval (s) to the NGN platform. The Timeout (s) platform. select Config → Voice Config → IAD Softswitch Profile Binding in the shortcut menu. window. Parameter Parameter Name Parameter Description Value Range / Requirement Property The number of the slot Slot No. Method Double-click to Compulsory type the slot number. containing the PON interface The value range is 11 to card that the ONU is connected 16. 3-27 . type the Compulsory authorization number of the ONU. The authorization number of the The value range is 1 to ONU. The number of the PON port that No. Access method Right-click the HSWA card the object tree. is connected with the ONU. Then the IAD Softswitch Profile Binding window will appear.3 GUI Reference of the HSWA Card 3. The name of the softswitch ProfileName platform interconnection parameter profile of the equipment. and click the IAD Softswitch Profile Binding tab. 128.7 Binding an IAD Softswitch Interconnection Profile Command function The IAD softswitch interconnection profile binding command is used to bind the parameter profile (configured in the Softswitch Parameter Profile window) to the ONU. PON Port Configuration Double-click to The value range is 1 to 8.5. Double-click to ONU No. Version: A Select its value from the names configured in the Softswitch ParameterProfile Click the Compulsory drop-down list to select the value. Compulsory type the PON port number. with. DHP 3-28 The prime number p of logarithm Value Range / Requirement Property Select its value from the endpoint domain names configured in the NGN default value is Disable. Compulsory type the number identifier of the MG. used in communication Name between the IAD and the gateway. Method Double-click to Compulsory type the domain name address of the gateway. select Config → Voice Config → IAD MD5 Configuration in the shortcut menu. the IAD MD5 configuration command is used to configure the parameters related to the MD5 authentication.248 protocol. Enable / Disable. The Configuration Click the Compulsory drop-down list to select the value. KEY The MD5 public key. Then the IAD MD5 Configuration window will appear. Double-click to Compulsory type the MD5 public key.8 Configuring IAD MD5 Command function When the gateway control protocol is the H. DHG The base number g of logarithm value exchange. Access method Right-click the HSWA card in the object tree of the object tree pane. The maximum length of its Compulsory Double-click to Version: A . exchange. Configuration window. The type the base characters that can be Compulsory number g of used include 0 to 9. logarithm A to F.5. The maximum length of its value is 32 characters. The number identifier of the MG. The maximum length of its Double-click to value is 16 characters. and click the IAD MD5 Configuration tab.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. MGID including the vendor and equipment information. Enables or disables the MD5 MD5 State authentication function of the IAD. Parameter Parameter Name Parameter Description Endpoint The domain name address of the Domain gateway. Double-click to The maximum length of its value is 32 characters. a to f. type the prime The characters that can be number p of used include 0 to 9.5. “－”. the gateway matches the dialed digits against the numbering scheme in the digitmap and reports to the MGC when a match is found. When a subscriber dials. 3. The characters that can be used include 0 to 9.9 Value Range / Property Requirement Configuration Method value is 256 characters. Then the DigitMap window will appear. Configuring Digitmap Command function When the SIP protocol is used. a to f. “︱”.5. Double–click to Compulsory X. 3. bracket / parenthesis. Access method Right-click the HSWA card in the object tree of the object tree pane. exchange. S. Version: A 3-29 . Activating a NGN Voice Port Automatically Command function The NGN voice port automatic activation command is used to enable / disable the automatic activation function of the voice port. used to match the DigitMap numbering scheme when dialing is performed by a subscriber.”. A to F. and click the DigitMap tab.3 GUI Reference of the HSWA Card Parameter Name value Parameter Description exchange. Parameter Parameter Name Parameter Description The SIP protocol digitmap. type the SIP protocol digitmap. the digitmap configuration command is used to configure the digitmap.10 Value Range / Requirement Property Configuration Method The maximum length of its value is 1024 characters. logarithm A to F. select Config → Voice Config → DigitMap in the shortcut menu. “. L. 3. Then the NGN User Register/Unregister window will appear. Access method Right-click the HSWA card in the object tree of the object tree pane. and then select Control Command → NGN User Register/Unregister in the shortcut menu. Activation Switch A voice port is enabled by default. 3-30 Version: A .5.AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Right-click the HSWA card in the object tree of the object tree pane. all voice ports will be disabled.11 Registering / Logging Out a NGN Subscriber Command function The NGN subscriber registering / logging out command is used to register / log out a certain NGN subscriber to the MGC manually according to the telephone number of this subscriber. Compulsory Click the drop-down list to select Enable or Disable. disabled. and the voice services will be interrupted. select Config → Voice Config → NGN Voice Port Auto Activation Switch in the shortcut menu. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Enables / disables the automatic activation function of a voice port. Then the NGN Voice Port Auto Activation Switch window will appear. If the automatic activation function is The default value is Enable. Viewing MGC / Register Server Status Command function The viewing MGC / regisiter server status command is used to view the real time connection status between the IAD and the softswitch platform MGC.5. select Get Information  NGN Status in the shortcut menu. The status parameters to be viewed include the IP address of the MGC connected with the IAD and the current regisiter status. value range is 0 to 99999999.12 drop-down list to select the value. Compulsory MGC manually. The type the telephone number. Version: A 3-31 . and click the MGC/Regisiter Server Status tab in the window that appears.3 GUI Reference of the HSWA Card Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The telephone number should be one of the Telephone number The telephone number of the NGN subscriber. Double-click to telephone numbers configured with the NGN Compulsory Config command. Access method Right-click the HSWA card in the object tree of the object tree pane. Registers or logs out the Register/Unregister NGN subscriber to the Click the Register / Unregister. Then the MGC/Regisiter Server Status window will appear. 3. 128. PON No.13 — Read-only — Read-only — Reg Success / Reg Fail / Registering / IAD Fail / IAD Restarting / Unregister Viewing NGN Subscriber Port Status Command function The viewing NGN subscriber port status command is used to view status of a certain subscriber port of the IAD according to the subscriber telephone number. 3. The connection status Reg Status between the IAD and the MGC.5.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Value Range / Requirement Property The number of the slot Slot No. Double-click to ONU No. Compulsory type the slot number. MGC/Register Server Address The IP address of the MGC connected with the IAD. type the PON port number. The number of the PON port that is connected with Method Double-click to connected with. select Get Information  NGN Status in the shortcut menu. Then the NGN User Port Status window will appear. Compulsory the ONU. 3-32 Version: A . Compulsory type the ONU authorization number. containing the interface The value range is 11 to card that the ONU is 16. Configuration Double-click to The value range is 1 to 8. The authorization number The value range is 1 to of the ONU. Access method Right-click the HSWA card in the object tree of the object tree pane. and click the NGN User Port Status tab in the window that appears. Access method Right-click the HSWA card in the object tree of the object tree pane. and click the IAD IP tab in the window that appears. Users should select a Telephone number telephone number that is configured with the NGN Config command and has been issued to the designated ONU voice The telephone number should Double-click to be one of the telephone numbers configured with the Compulsory NGN Config command. Version: A 3-33 . EP-RINGING / EP-REGISTER-FAIL / Read-only — EP-STATUS-INACTIVE / EP-RING-BACK / EP-HANGUP / USER-NOT-HANGUP 3.3 GUI Reference of the HSWA Card Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The telephone number corresponding to the ONU voice port. select Get Information  NGN Status in the shortcut menu. value range is 0 to 99999999. The type the telephone number. EP-STATUS-IDLE / EP-CONNECTED / EP-STATUS-BUSY / Reg Status Is used to display status of the current subscriber port.5.14 Viewing IAD IP Address Command function The viewing IAD IP address command is used to view status of a certain subscriber port of the IAD according to the subscriber telephone number. Then the IAD IP window will appear. port. this parameter is used to display the IP address of the slave DNS server. The authorization number of the ONU. Slave DNS Server 3-34 When the MGC address is in domain name mode. The number of the PON port that is The value range is 1 connected with the ONU. The value range is 1 to 128. Double-click to ONU No. Master When the MGC address is in domain name DNS mode. this parameter is used to display the Server IP address of the master DNS server. to 8.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description The number of the slot containing the Slot No. Version: A . Property Configuration Method Double-click to Compulsory type the slot number. Double-click to Compulsory type the PON port number. PON No. Value Range / Requirement The value range is 1 11 to 16. interface card that the ONU is connected with. The gateway address corresponding to the Gateway voice IP address actually used by the ONU. Compulsory type the ONU authorization number. — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — The subnet mask corresponding to the IP Mask voice IP address actually used by the ONU. IP Address The ONU voice IP address dynamically configured via DHCP. the IGMPv2 is defined by RFC2236. and the IGMPv3 is defined by RFC3376. 3.3 GUI Reference of the HSWA Card 3.6. Then the IGMP Task window will appear.1 Selecting Multicast Version Command function The multicast version selection command is used to configure the version of the IGMP protocol used by the equipment.6. The IGMP protocol has three versions: IGMPv1 / v2 / v3. Its value Version includes IGMP version 1/version 2 Click the drop-down list to — Compulsory and IGMP version 3. the IGMPv1 is defined by RFC1112.6 Configuring Multicast Service 3. Access method Right-click the HSWA card in the object tree pane. A multicast profile is used to configure the related parameters of a group of multicast programs. Parameter Parameter Name Parameter Description Value Range / Requirement Property The version of the IGMP protocol Igmp used by the equipment. Configuring a Multicast Profile Command function The multicast profile command is used to create a multicast profile and add multicast programs in the created profile. and then select Config → IGMP Config → IGMP Task in the shortcut menu. Main purposes of a multicast profile are described as follows: Version: A 3-35 . One multicast profile can be applied on multiple ONU ports at the same time.2 Configuration Method select the version of the IGMP protocol. Access method Right-click the HSWA card in the object tree pane. Preview: The subscriber only can watch this multicast program in the appointed periods. users need to bind the multicast profile. when it is needed to set the group parameters of a certain multicast group. Then the Igmp Profile window will appear. digital numbers. when authorizing subscriber access to multicast programs. In uncontrollable mode. users should operate as follows: First create a multicast profile. — Compulsory the IP address of the multicast program. Double-click to type Auth The IP address of the multicast group program. Click the drop-down — Compulsory list to select the value. and then select Config → IGMP Config → IGMP Profile and Port in the shortcut menu. Compulsory the multicast profile name. and its maximum length is 20 characters. Authority Normal: The subscriber can watch this multicast program with no restriction. The authorization of a subscriber watching the designated multicast program. 3-36 Version: A . then add the designated multicast group in this multicast profile.AN5516-06 Optical Line Terminal Equipment GUI Reference 1. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Can be composed of Profile The name of the multicast Name profile. Its value includes Normal and Preview. and finally configure the group parameters. In controllable mode. Double-click to type English letters. 2. or underlines. Parameter Parameter Parameter Value Range / Name Description Requirement address of the group multicast program Configuration Method Read-only. with the unit being the multicast program is subscriber to time. The authorization of multicast program.3 GUI Reference of the HSWA Card 3. The parameters to be configured include VLAN ID of downlink multicast program stream. Optional. etc. Users need to configure this parameter in the Igmp — Profile window. Igmp Profile window. this parameter is preview the the value configured in valid. preview parameters. Igmp Profile window. Version: A 3-37 . The authorization of multicast program. VLAN ID of uplink multicast protocol message. Its default value is Preview. Access method Right-click the HSWA card in the object tree. the Default Preview the multicast program Parameter window. The destination IP Auth Property — stream. Then the Group Parameters window will appear.3 Configuring Group Parameters Command function The group parameter configuration command is used to configure the parameters of a multicast group. The value range is 0 to When the authorization of The duration for a 254. Its default value Preview. Preview Counts (Times) The value range is 0 to When the authorization of The times for a 16. this parameter is Time (Min) preview the is the value configured in valid. multicast program stream bandwidth. with the unit being the multicast program is Preview subscriber to minute. and click the Group Parameters tab in the window that appears. should be configured in the Double-click to type the times for a subscriber to preview the multicast program. the Default Preview the multicast program Parameter window.6. should be configured in the Double-click to type the duration for a subscriber to preview the multicast program. Optional. select Config → IGMP Config → IGMP Profile and Port in the shortcut menu. Group The bandwidth of The value range is 0 to Bandwidth the multicast 30000. this parameter is the reset period of the value configured in valid. this parameter is preview the is the value configured in valid.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Value Range / Name Description Requirement Property Configuration Method Optional. Optional. kbit/s. this parameter is preview of this is the value configured in valid. 3-38 Version: A . It is not Reserved recommended that users configure this parameter. should be configured in the Double-click to type the total duration for a subscriber to preview the multicast program. Its default value Preview. should be configured in the Double-click to type The interval between each preview of this multicast program. with the unit being the multicast program is Double-click to type hour. Its default value Preview. should be configured in the Igmp Profile window. The authorization of multicast program. Its default value is Preview. The authorization of subscriber preview the Default Preview the multicast program authority. The value range is 0 to When the authorization of 254. and its default Group the downlink value is the value VLAN multicast program configured in the Default stream. Preview Parameter Double-click to type Compulsory the VLAN ID of the downlink multicast program stream. the Default Preview the multicast program Parameter window. Preview Total Time (min) The value range is 0 to When the authorization of The total duration 254. Preview Interval (Min) The value range is 0 to When the authorization of The interval 254. The authorization of multicast program. Igmp Profile window. with the unit being the multicast program is for a subscriber to minute. Preview The reset interval Reset of subscriber Interval (h) preview authority. Parameter window. The value range is 0 to The VLAN ID of 4088. with the unit being (Kbit/s) program stream. window. Optional. the Default Preview the multicast program Parameter window. Igmp Profile window. with the unit being the multicast program is between each minute. 3 GUI Reference of the HSWA Card Parameter Parameter Value Range / Name Description Requirement Configuration Property Method The wait time from Double-click to type the moment a the wait time from subscriber gives the moment a the multicast Optional. subscriber gives the Leave router a leaving The value range is 0 to When the uncontrollable multicast router a Delay (s) protocol message 300. select Config → IGMP Config → IGMP Profile and Port in the shortcut menu. The parameters to be configured include controllability of the port. message. message to the to the moment when the leaving moment when the command leaving command becomes valid. Then the Port Parameters window will appear. The VLAN ID of Double-click to type Signalling the uplink The value range is 0 to VLAN multicast protocol 4095. Compulsory uplink multicast protocol message. maximum online group number on the port. Access method Right-click the HSWA card in the object tree pane. Property Compulsory Configuration Method Click the drop-down list to select the value. etc. Version: A Parameter Description Value Range / Requirement The number of the slot containing The value the interface card that the ONU is range is 11 to connected with. Parameter Parameter Name Slot No. multicast mode is used. with the unit being s. and click the Port Parameters tab in the window that appears. this leaving protocol parameter is valid. 3-39 .4 the VLAN ID of the Configuring Port Parameters Command function The port parameter configuration command is used to configure the multicast-related parameters of an ONU port. 3.6. name of the profile bound to the port. 16. becomes valid. The value range is 1 to Configuration Method Double-click to type the PON port number. this parameter Profile The name of the multicast profile Name to be bound with the ONU port. When other multicast modes are used. Double-click to type the Compulsory ONU authorization 64. number. When the controllable multicast mode is used. Sets controllability of the ONU port (controllable or uncontrollable). always set it to Uncontrolled. The value Double-click to type the range is 1 to Compulsory 24. 3-40 Version: A . — The multicast profile names Click the drop-down list to select the value. FE port number of the ONU. ONU No. The FE port number of the ONU. used. Value Range / Requirement Property The value range is 1 to 4 Compulsory or 1 to 8.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name PON No. Optional. The authorization number of the ONU. Parameter Description The number of the PON port that is connected with the ONU. This parameter should be set to Control Controlled only when the Switch controllable multicast mode is — Compulsory Click the drop-down list to select the value. is valid. ONU Port No. to be selected here should be configured in the Igmp Profile window. the system will stop forwarding the multicast data stream to this subscriber terminal immediately. after a certain subscriber sends the leave message. Version: A 3-41 . the system will stop forwarding the multicast data stream to this subscriber terminal. with Reserved that users configure this parameter. Leave Mode NON FAST-LEAVE: In this mode. It is not recommended range is 0 to 100000. 4085. The value Double-click to type maximum number of Max Online The maximum number of multicast range is 0 to Groups programs that can be online on the 255.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The mode of a subscriber under an ONU port leaving a multicast group. The value includes NON FAST-LEAVE and FAST-LEAVE. if the join message of this subscriber terminal is not received in the query response time. VLAN ID of the uplink Compulsory multicast protocol message passing the ONU port. FAST-LEAVE: In this mode. the ONU will Includes NON FAST-LEAVE and Compulsory Click the drop-down list to select the value. FAST-LEAVE. send the specific group query message to the port receiving this leave message. Compulsory multicast programs that The value Port Bandwidth (Kbit/s) The bandwidth used for multicast service at the ONU port. default value is can be online on the ONU 32. Double-click to type Signal Vlan The VLAN ID of the uplink The value multicast protocol message range is 0 to passing the ONU port. port at the same time. the unit being kbit/s. after a certain subscriber sends the leave message. and the (Group) ONU port at the same time. The parameters to be configured include robustness index. The default value common query is 10. Double-click to type the The maximum Query response interval (s) interval of a The value range is 1 to subscriber 255. sending the multicast downlink query message. Parameter Parameter Parameter Value Range / Name Description Requirement Property Configuration Method The robustness parameter of the IGMP protocol stack Robustness Variable in relation to the The value range is 2 to network packet loss. and the default value Refers to the times of is 2. parameters related to specific query. select Config → IGMP Config → IGMP Profile and Port in the shortcut menu. parameters related to common query. Double-click to type the Compulsory robustness index.6. with the unit being responding to a second. etc. Version: A . Then the IGMP Protocol Parameters window will appear. 16. and click the IGMP Protocol Parameters tab in the window that appears.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. It is recommended that the default value be used. It is recommended that the default value be used. command. Access method Right-click the HSWA card in the object tree pane. 3-42 maximum interval of a Compulsory subscriber responding to a common query command.5 Configuring Multicast Protocol Parameters Command function The multicast protocol parameter configuration command is used to configure the IGMP protocol parameters. The default value command. The default value is 260. with the unit being second. is 1. It is recommended that the default value be used. The default value is 2. It is recommended that the default value be used. is 125. Double-click to type the The interval of the The value range is 11 to Query equipment sending a 255. Version: A 3-43 . It is recommended that the default value be used. default value be used. interval of the equipment Compulsory sending a common query command.3 GUI Reference of the HSWA Card Parameter Parameter Value Range / Name Description Requirement Property Configuration Method Double-click to type the Last The interval of the The value range is 1 to member equipment issuing a 255. Compulsory issuing a specific group query command. Double-click to type the Last member query count times of the equipment The times of the equipment issuing a The value range is 1 to specific group query 16. If a multicast Group member does not Membership respond during the Interval (s) set aging time. It is recommended that the command. The default value interval (s) command. this multicast member Double-click to type the The value range is 0 to 65535. interval of the equipment Compulsory issuing a specific group query command. will be deleted from the multicast group. The aging time of a multicast member. with the unit being query specific group query second. aging time of a multicast Compulsory member. with the unit being Interval (s) common query second. equipment set.6 Configuring a Multicast Cascade Port Command function The multicast cascade port configuration command is used to configure multicast cascade ports.7 Configuring Uplink Port Maximum Multicast Bandwidth Command function The uplink port maximum multicast bandwidth configuration command is used to configure an uplink port’s maximum bandwidth used for the multicast service. 3. Access method Right-click the HSWA card in the object tree pane. Then the IGMP Cascade Ports window will appear. 3-44 Version: A . with the cascaded Compulsory — Click the drop-down list to select the value. users need to configure the AN5516-06 uplink port connected with multicast services of another equipment set as a cascade port.AN5516-06 Optical Line Terminal Equipment GUI Reference 3.6. Parameter Parameter Parameter Value Range / Name Description Requirement Property Configuration Method The number of the Cascade uplink port connected Ports No. and select Config → IGMP Config → IGMP Cascade Ports in the shortcut menu. When the AN5516-06 cascades multicast services of other equipment sets.6. 3. with the uplink port’s The uplink port’s maximum bandwidth the unit being used for the multicast service. Version: A 3-45 .6. Parameter Parameter Name Uplink Bandwidth (Kbit/s) Parameter Description Value Range / Requirement Configuration Method The value range is Double-click to type 0 to 7000000. Access method Right-click the HSWA card in the object tree pane. Then the Max Uplink IGMP Bandwidth window will appear. and click the Max Uplink IGMP Bandwidth tab in the window that appears. Then the IGMP Mode window will appear. service.8 Property Compulsory maximum bandwidth used for The default value the multicast is 1. Configuring Multicast Mode Command function The multicast mode configuration command is used to configure the multicast mode used by the AN5516-06. and select Config → IGMP Config → IGMP Mode in the shortcut menu. kbit/s.3 GUI Reference of the HSWA Card Access method Right-click the HSWA card in the object tree pane. select Config  IGMP Config  IGMP Cascade Ports in the shortcut menu. and the system adds management and control functions on the authorization of a subscriber watching the multicast programs. Proxy-snooping Mode: The integration of the proxy mode and the snooping mode. Controlled Mode. The value includes Proxy Mode. both the core switch card and the PON interface card use the IGMP proxy protocol. disable: The core switch card broadcasts the multicast messages. and maintains its own multicast forwarding table. and maintains a multicast address table. so as to act as the proxy between the multicast router and the host. Proxy-snooping Mode. In this mode. both the core switch card and the PON interface card use the IGMP snooping protocol.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Property Configuration Method The multicast mode used by the AN5516-06. the core switch card uses the IGMP proxy protocol. Proxy Mode: The multicast proxy equipment intercepts multicast protocol messages sent by subscribers and the router. and disable. and the PON interface card uses the IGMP snooping protocol. Controlled Mode: The IGMP proxy protocol is used. and the PON interface card uses the IGMP snooping protocol. The multicast snooping equipment snoops and forwards IGMP messages Compulsory Click the drop-down list to select the value. Snooping Mode: The multicast snooping equipment snoops multicast protocol messages between the router and the host. In this mode. passively. 3-46 Version: A . Snooping Mode. In this mode. so as to set up corresponding relationships between the IGMP Mode multicast group and ports. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The default VLAN ID of the multicast service VLAN. users can configure one or multiple VLANs dedicated for the multicast service. all the multicast programs will belong to the default multicast service VLAN. Then the Multicast VLAN window will appear. so as to isolate the Double-click the type The value range is 4088 or 0 to 4085. and select Config → IGMP Config → Multicast VLAN in the shortcut menu. Access method Right-click the HSWA card in the object tree pane. One multicast program can only belong to one multicast VLAN. multicast service from other services. 3. Compulsory the VLAN ID of the default multicast service VLAN. If users do not set multicast service VLANs in the Group Parameters window for the multicast programs. The multicast VLAN is used to identify the video multicast VLAN data stream. Version: A 3-47 .6.6. and one multicast VLAN can include one multicast program or one multicast program group (a multicast program group refers to the set of multicast programs managed under a unified authorization).10 Configuring Dynamic Multicast VLAN Mode Command function The dynamic multicast VLAN mode configuration command is used to enable or disable the dynamic multicast VLAN function. The default value is 4088.3 GUI Reference of the HSWA Card 3.9 Configuring a Multicast VLAN Command function The multicast VLAN configuration command is used to configure the default multicast service VLAN for the AN5516-06. Click the drop-down Compulsory list to select the value. Enable/Disable Disable means disabling the dynamic multicast VLAN function. Then the IGMP Proxy IP window will appear. and the multicast proxy IP address acts as the source IP address of the multicast protocol message sent by the AN5516-06. and select Config → IGMP Config → IGMP Proxy IP in the shortcut menu.AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Right-click the HSWA card in the object tree pane. the equipment sets up a multicast channel dynamically according to the multicast uplink protocol message VLAN. In The default value is Disable. 3-48 Version: A . Then the Dynamic IGMP VLAN Mode window will appear. Access method Right-click the HSWA card in the object tree pane.11 Configuring a Multicast Proxy IP Address Command function The multicast proxy IP address configuration command is used to configure the multicast proxy IP address of the AN5516-06. 3. the equipment sets up a multicast channel according to the multicast VLAN configured in the Multicast VLAN and Group Parameters windows. In this mode. and select Config → IGMP Config → Dynamic IGMP VLAN Mode in the shortcut menu. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Enable means enabling the dynamic multicast VLAN function. this mode.6. This command and its function are described as follows: If a multicast program that has been frequently watched is configured as the prejoining multicast program. a subscriber can join the multicast group rapidly when he / she needs to watch this multicast program. Parameter Parameter Name Prejoin Group Version: A Parameter Description Value Range / Requirement Property Double-click to type the IP The IP address of the prejoining multicast program. and select Config → IGMP Config → Prejoin Groups in the shortcut menu.25. 3. Configuration Method — Compulsory address of the prejoining multicast program. Then the Prejoin Groups window will appear.12 Prejoining a Certain Multicast Group Command function The prejoining multicast group command is used to configure the prejoining multicast programs. Access method Right-click the HSWA card in the object tree pane. users need to configure this parameter.57.3 GUI Reference of the HSWA Card Parameter Parameter Name Value Range / Parameter Description Requirement Property Configuration Method Optional. When IGMP Mode is set to Proxy The multicast proxy IP address of Mode. or message sent by the AN5516-06. Mode.14.6. meaning the source The default value Proxy-snooping Proxy’s IP IP address of the multicast protocol is 10. this multicast program will be led to the uplink port of the equipment. 3-49 . IGMP the AN5516-06. Double-click to type the multicast proxy IP address. Controlled Mode. 3-50 Double-click to type The interval between each preview of this multicast program. The value range is 1 to This parameter is valid only 254. multicast program is set to Preview. Configuration Method Double-click to type the times for a subscriber to preview the multicast program. Its default value is the authorization of the program. multicast program is set to Preview.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. every time. Parameter Parameter Parameter Value Range / Name Description Requirement Property Optional. preview interval. Version: A . with the unit being in controllable mode when for a subscriber to Time (Min) the multicast program minute. with the unit being in controllable mode when the multicast time.6. is 10. and select Config → IGMP Config → Default Preview Parameters in the shortcut menu.13 Configuring Default Preview Parameters Command function The default preview parameter configuration command is used to configure the default multicast preview parameters. Then the Default Preview Parameters window will appear. with the unit being in controllable mode when minute. multicast program is set to multicast program Preview. The parameters to be configured include preview times. Preview The interval between Interval each preview of this (Min) multicast program. Its default value the authorization of the preview the every time. Double-click to The duration for a The value range is 1 to This parameter is valid only type the duration Preview subscriber to preview 254. Preview Counts (Times) The times for a The value range is 1 to This parameter is valid only subscriber to preview 16. Access method Right-click the HSWA card in the object tree pane. Its default value the authorization of the is 30. Optional. the subscribers can only preview this multicast program according to the default preview parameters. 4. preview duration. Optional. etc. If users do not set preview parameters in the Group Parameters window for a certain multicast program. The value range is 1 to This parameter is valid only 254. with the unit being in controllable mode when duration for a preview the multicast minute. 3.6. is 254. Preview Total Time (min) Configuration Method Double-click to type The reset period of subscriber preview authority. users need to configure the multicast log time parameters. Its default value is the authorization of the 24. multicast program. with the unit being in controllable mode when hour. multicast program is set to Preview. Version: A 3-51 . the multicast log function is valid.14 Configuring Log Time Command function The log time configuration command is used to configure the time parameters of the multicast log. Double-click to The total duration for The value range is 1 to This parameter is valid only type the total a subscriber to 254. The multicast log is used to record joining or leaving a multicast group of subscribers. multicast program is set to preview the Preview. Its default value the authorization of the subscriber to program. and select Config → IGMP Config → Log Management in the shortcut menu.3 GUI Reference of the HSWA Card Parameter Parameter Value Range / Name Description Requirement Property Optional. Access method Right-click the HSWA card in the object tree pane. When the multicast mode is set to Controlled Mode. When the multicast log automatic report function is enabled. Preview The reset period of Reset subscriber preview Interval (h) authority. Then the Log Parameters window will appear. Optional. Ignore Time (s) Property Compulsory Configuration Method Double-click to type the log ignore time. than the log ignore This indicates that no time set by this matter a subscriber joins parameter. After a subscriber joins the multicast group. Compulsory automatic log generation interval. 3. automatically generate a multicast record on his / her online in the multicast log. the system will The value range is 1 to Double-click to type the 60. The default value is 60. if his / her watching duration exceeds the Generate interval (min) automatic log generation interval set by this parameter. When the multicast log automatic report function is enabled. the record the multicast group for a on his / her joining / long or short time. the multicast log can be reported to the FTP server automatically.6.15 Configuring Multicast Log Automatic Report Command function The multicast log automatic report command is used to enable / disable the multicast log automatic report function and configure the parameters related to this function. with the unit being minute. if his / her second. watching time is less The default value is 0. the leaving will not be record on his / her joining kept in the multicast / leaving will always be log. with the unit being group. 3-52 Version: A . kept in the multicast log.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Parameter Value Range / Name Description Requirement After a subscriber The value range is 0 to joins the multicast 60. Optional. and the path saving the multicast log file correctly. The value range is 1 to 1440. disabling the multicast log automatic report function. The default value is Disable means Disable. When the multicast log automatic report function is enabled.Then the IGMP Auto Upload window will appear.exe program successfully as follows: Type the user name. the multicast log function is valid.3 GUI Reference of the HSWA Card When the multicast mode is set to Controlled Mode. — is enabled. Access method Right-click the HSWA card in the object tree pane. Double-click to type the IP address of the FTP server to which the multicast log is reported. The interval of the Interval multicast log being (min) reported to the FTP server. this parameter needs configuration. Optional. Host IP The IP address of the When the multicast log FTP server to which the automatic report function multicast log is reported. password. Note: Before enabling the multicast log automatic report function. and keep the WFTPD. 3-53 . users need to run the WFTPD.exe program in the running status. and click the IGMP Auto Upload tab in the window that appears. Version: A Double-click to type the interval of the multicast log being reported to the FTP server. this parameter needs configuration. Parameter Parameter Parameter Value Range / Name Description Requirement Property Configuration Method Enable means enabling the multicast log automatic report Enable function. with the unit being minute. select Config → IGMP Config → Log Management in the shortcut menu. Click the drop-down Compulsory list to select the value. multicast mode. and select Config → IGMP Config → ONU Configuration in the shortcut menu. When the multicast log Double-click to type The maximum length automatic report function the password to log is 20 characters. etc. Optional. Access method Right-click the HSWA card in the object tree pane. Then the ONU Configuration window will appear. 3-54 Version: A . this in the multicast log parameter needs report FTP server. 3. robustness parameter.6. is enabled.16 Configure ONU Parameters Command function The ONU parameter configuration command is used to configure the multicast-related parameters of an ONU.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Value Range / Name Description Requirement Property Configuration Method Optional. this in the multicast log parameter needs report FTP server. The password to log in Password the multicast log report FTP server. is enabled. configuration. When the multicast log Double-click to type The maximum length automatic report function the user name to log is 20 characters. The parameters to be configured include ONU leave mode. User Name The user name to log in the multicast log report FTP server. configuration. times of issuing a specific group query command. type the Compulsory authorization number of the ONU. Version: A type the IGMP Compulsory protocol stack robustness parameter. after a certain subscriber sends the leave message. and the default the times of the ONU sending the value is 2. the system will stop forwarding the multicast data stream to this subscriber terminal. the specific group query message to the port receiving this leave message. The authorization number of the The value range is 1 to ONU. Refers to 12. multicast downlink query message. 3-55 . The value includes NON FAST-LEAVE and FAST-LEAVE. Leave Mode NON FAST-LEAVE: In this mode. FAST-LEAVE: In this mode. Value Range / Requirement The value range is 11 to 16. Double-click to ONU Authorized No. Double-click to Compulsory type the PON port number. PON Port The number of the PON port that is The value range is 1 to No. the PON interface card that the ONU is connected with. if the join message of this subscriber terminal is not received in the query response time. connected with the ONU. recommended Reserved that users configure this leave message. 4 or 1 to 8. the system will stop forwarding the multicast data stream to this subscriber terminal It is not immediately. The leaving multicast group mode of an ONU. Property Configuration Method Click the Compulsory drop-down list to select the value. The default value is after a certain subscriber sends the FAST-LEAVE. the ONU will send parameter. 64.3 GUI Reference of the HSWA Card Parameter Parameter Name Parameter Description The number of the slot containing Slot No. Double-click to The robustness parameter of the Robustness Count IGMP protocol stack in relation to The value range is 0 to the network packet loss. and select Control Command → IGMP Config → IGMP Log Upload in the shortcut menu.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Requirement Property Configuration Method Double-click to Last Member The times of the ONU issuing a Query specific group query command. Proxy Mode. Multicast Log FTP Report Command function The multicast log FTP report command is used to report the multicast log to the FTP server manually. When the multicast mode is set to Controlled Mode. the multicast log function is valid.6. Count type the times of The value range is 0 to 12. Then the IGMP Log Upload window will appear. The multicast mode of the ONU. password. 3-56 Version: A . Note: Before executing the multicast log FTP report command. and the default Compulsory the ONU issuing a specific group value is 2.exe program successfully as follows: Type the user name. 3. users need to run the WFTPD. query command. Access method Right-click the HSWA card in the object tree pane. IGMP mode Value Range / including Snooping Mode.17 The default value is Snooping Mode. Click the Compulsory drop-down list to select the value. and Controlled Mode. and the path saving the multicast log file correctly. and select Control Command → IGMP Config → Force Leave in the shortcut menu.3 GUI Reference of the HSWA Card Parameter Parameter Name Parameter Description Value Range / Requirement Property FTP server to which the — Compulsory Name The user name to log in the multicast log report FTP server. Version: A 3-57 . to Controlled Mode. User Method Double-click to type The IP address of the Host IP Configuration The maximum length is 20 characters. File Name The name of the multicast log file. Then the Force Leave window will appear. Double-click to type the password. 3. Double-click to type the file name. When the multicast mode is set forcing-subscriber-to-leave function is valid. multicast log is reported. Compulsory Compulsory The maximum length is 20 characters (including the file Compulsory name postfix). Double-click to type the user name. Forcing Subscribers to Leave Command function The forcing-subscriber-to-leave command is used to force subscribers under a certain ONU port to leave the multicast program that they are watching. The password to log in Password the multicast log report FTP server. The maximum length is 20 characters.18 the IP address of the FTP server.6. the Access method Right-click the HSWA card in the object tree pane. Access method Right-click the HSWA card in the object tree pane. Group The IP address of the Address multicast program. The value range is 1 to 4 and 1 to 8. Double-click to type the Compulsory FE slot number of the ONU. Compulsory Click the drop-down list to select the value.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The number of the slot Slot No. Note: Executing this command does not influence subscribers watching multicast programs. ONU Port The FE port number of the The value range is 1 to No. The authorization number of The value range is 1 to the ONU. and select Control Command → IGMP Config → Flush IGMP Configuration in the shortcut menu. that is connected with the ONU. 64. ONU. Then the IGMP Flush Ports window will appear. The number of the PON port PON No.6. connected with. ONU No. 3. Double-click to type the — Compulsory IP address of the multicast program. containing the PON interface The value range is 11 to card that the ONU is 16. Refreshing Multicast Configuration Information Command function The refreshing multicast configuration information command is used to re-issue multicast configuration information to the equipment. Double-click to type the Compulsory authorization number of the ONU. 24.19 Compulsory Double-click to type the PON port number. 3-58 Version: A . 3. users can execute the clearing log command.21 Parameter Description Clears the multicast log. Then the Clear IGMP Record window will appear. Version: A 3-59 . to free up a significant amount of storage memory occupied by multicast logs on the HSWA card. Parameter Parameter Name Clear 3. Access method Right-click the HSWA card in the object tree pane. Value Range / Requirement — Property Configuration Method Read-only — Viewing Online Multicast Group Information Command function The viewing online multicast group information command is used to view information of all subscribers watching a certain multicast program.6.6. and select Control Command → IGMP Config → Clear IGMP Record in the shortcut menu.20 Value Range / Requirement — Property Configuration Method Read-only — Clearing Log Command function The clearing log command is used to clear the multicast log information saved in the Flash of the HSWA card. This command is valid only when the multicast mode is set to Controlled Mode. If the multicast log has been reported to and backed up in the FTP server.3 GUI Reference of the HSWA Card Parameter Parameter Name Flush Parameter Description Refreshes multicast configuration information. 3.22 Viewing Online Group Information of an ONU Port Command function The viewing ONU port online group information command is used to view information of multicast programs that are watched by subscribers on a certain ONU port. ONU Port No. Parameter Parameter Name Parameter Description Group The IP address of the multicast program to Address be viewed. Preview User: The subscriber only can watch this multicast program with certain restrictions. The status of the subscriber watching the multicast program. 3-60 Version: A . connected with the subscriber watching the multicast program. including Normal User and Preview User. The number of the PON port connected PON No. Status Normal User: The subscriber can watch this multicast program with no restriction. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — The slot number of the PON interface card Slot No. with the subscriber watching the multicast program.AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Right-click the HSWA card in the object tree pane.6. The number of the ONU port connected with the subscriber watching the multicast program. connected with the subscriber watching the multicast program. The authorization number of the ONU ONU No. Then the Online Groups Information window will appear. and select Get Information  IGMP Config  IGMP Information in the shortcut menu. The authorization number of the ONU to The value range is 1 be viewed. Preview Normal: The subscribers on the ONU Flag port can watch this multicast program with no restriction. Property Configuration Method Click the Compulsory drop-down list to select the value. select Get Information  IGMP Config  IGMP Information in the shortcut menu. including Normal and Preview.3 GUI Reference of the HSWA Card This command is valid only when the multicast mode is set to Controlled Mode. to 4 or 1 to 8. with the ONU to be viewed. The IP address of the multicast program being watched by all subscribers on the — Read-only — — Read-only — ONU port. PON Port The number of the PON port connected The value range is 1 No. Group Address Double-click to Compulsory type the ONU port number. The authorization of the subscribers on the ONU port watching a certain multicast program. Preview: The subscribers on the ONU port can only watch this multicast program with certain restrictions. Then the Online ONU Ports Info window will appear. ONU Port The number of the ONU port to be The value range is 1 No. and click the Online ONU Ports Info tab in the window that appears. viewed. Parameter Parameter Name Parameter Description The slot number of the PON interface Slot No. card connected with the ONU to be viewed. Double-click to ONU No. Double-click to Compulsory type the PON port number. Value Range / Requirement The value range is 1 to 16. Access method Right-click the HSWA card in the object tree pane. to 24. Version: A 3-61 . to 64. Compulsory type the ONU authorization number. 6. Then the Online Uplink Ports Info window will appear. and click the Online Uplink Ports Info tab in the window that appears. Parameter Description The number of an uplink port. Type Uplink Port: an uplink port without multicast cascade. Cascade Port: an uplink port with multicast cascade. select Get Information  IGMP Config  IGMP Information in the shortcut menu.6. 3-62 Version: A . 3. Parameter Parameter Name Uplink Port No. This command is valid in all non-disable modes.24 Viewing Core Switch Card Multicast Address Table Command function The viewing core switch card multicast address table command is used to view the multicast channel information on the core switch card. including the IP address of the multicast program on the core switch card and the slot number of the PON interface card connected with the subscriber watching the multicast program.23 Viewing Uplink Port Information Command function The viewing uplink port information is used to view the online multicast program information on a cascade uplink port.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. Value Range / Property Configuration Method — Read-only — — Read-only — — Read-only — Requirement The type of an uplink port. including Uplink Port and Cascade Port. Access method Right-click the HSWA card in the object tree. Group The IP address of the online multicast Address program on the cascade port. Version: A 3-63 .3 GUI Reference of the HSWA Card Access method Right-click the HSWA card in the object tree pane. select Get Information  IGMP Config  IGMP Information in the shortcut menu. Viewing ONU Multicast Address Table Command function The viewing ONU multicast address table command is used to view the multicast channel information on a certain ONU. Access method Right-click the HSWA card in the object tree pane. Then the ONU IGMP Addr Table window will appear. including the IP address of the multicast program on the ONU and the number of the ONU port connected with the subscriber watching the multicast program. Then the GSW IGMP Addr Table window will appear. Property Configuration Method Read-only — Read-only — Invalid — The slot number of the PON Group Member interface card connected with the Slot subscriber watching the multicast program. Parameter Parameter Name Group Address Parameter Description The IP address of the multicast program on the core switch card. Group Member Port 3. This command is valid in all multicast modes. and click the GSW IGMP Addr Table tab in the window that appears.25 The number of the PON port connected with the subscriber watching the multicast program. and click the ONU IGMP Addr Table tab in the window that appears.6. select Get Information  IGMP Config  IGMP Information in the shortcut menu. This command is valid in Proxy Mode and Controlled Mode. Item The quantity of multicast programs on the ONU. Double-click to Compulsory type the PON port number. with the ONU to be viewed. select Get Information  IGMP Config  IGMP Information in the shortcut menu.26 Viewing PON Interface Card Multicast Address Table Command function The viewing PON interface card multicast address table command is used to view the multicast channel information on a certain PON interface card.6. Then the PON Multicast Address Table window will appear. Group The IP address of the multicast program Address on the ONU.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description The slot number of the PON interface Slot No. — Read-only — — Read-only — — Read-only — The number of the ONU port connected Port No. to 64. card connected with the ONU to be viewed. to 4 or 1 to 8. Property Configuration Method Click the Compulsory drop-down list to select the value. including the IP address of the multicast program on the PON interface card and the number of the PON port connected with the subscriber watching the multicast program. and click the Line Card IGMP Addr Table tab in the window that appears. with the subscriber watching the multicast program. type the Compulsory authorization number of the ONU. 3-64 Version: A . The authorization number of the ONU to The value range is 1 be viewed. Value Range / Requirement The value range is 11 to 16. Access method Right-click the HSWA card in the object tree. Double-click to ONU No. PON Port The number of the PON port connected The value range is 1 No. 3. Property Configuration Method Double-click to Compulsory type the slot number.6. and select Get Information  IGMP Config  IGMP Statistics in the shortcut menu. Parameter Description Value Range / Requirement The slot number of the PON The value range is interface card to be viewed. Version: A 3-65 . This command is valid only in Controlled Mode. Then the Group Statistics window will appear. 3.27 Viewing Multicast Group Statistics Information Command function The viewing multicast group statistics information command is used to view the statistics information of a certain multicast program. The IP address of the Group Address multicast program on the PON interface card.3 GUI Reference of the HSWA Card Parameter Parameter Name Slot No. including times of a subscriber joining the multicast group and duration of a subscriber watching the multicast program. connected with the subscriber watching the multicast program. The number of the PON port PON Port No. Access method Right-click the HSWA card in the object tree pane. The multicast program Item numbers on the PON — Read-only — — Read-only — — Read-only — interface card. 11 to 16. Preview Times of a subscriber previewing the Count multicast program.6. Times of a subscriber joining the multicast group. This command is valid only in Controlled Mode. Access method Right-click the HSWA card in the object tree pane. Max Order The maximum duration of a subscriber Time watching the multicast program. Total Order The total duration of a subscriber watching Time the multicast program. Total Preview Time The total duration of a subscriber previewing the multicast program.28 Value Range / Requirement Property Configuration Method — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — Viewing ONU Port Statistics Information Command function The viewing ONU port statistics information command is used to view the statistics information of a certain ONU port. and click the ONU Port Statistics tab in the window that appears.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Group Address Order Count Parameter Description The IP address of the multicast program. select Get Information  IGMP Config  IGMP Statistics in the shortcut menu. Then the ONU Port Statistics window will appear. 3-66 Version: A . including times of subscribers on this port joining the multicast group and duration of subscribers watching the multicast program. 3. Average The average duration of a subscriber Order Time watching the multicast program. PON No. Parameter Description The slot number of the PON interface connected with the ONU. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — ONU No. — Read-only — ONU Port No.3 GUI Reference of the HSWA Card Parameter Parameter Name Slot No. The number of the PON port connected with the ONU. Version: A 3-67 . The number of the ONU port. The authorization number of the ONU. Max Order The maximum duration of a subscriber on the Time ONU port watching the multicast program. Average The average duration of a subscriber on the Order Time ONU port watching the multicast program. — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — Order Count Times of a subscriber on the ONU port joining the multicast group. Total Order The total duration of a subscriber on the ONU Time port watching the multicast program. The slot number of the PON interface card corresponding to the designated log record. PON No. The IP address of the multicast program / Group Address group that the recorded subscriber joins / Read-only leaves / watches. This command is valid only in Controlled Mode. ONU No. The event corresponding to the designated log Action record. Parameter Description The generation time of the designated log record. The authorization number of the ONU corresponding to the designated log record.29 Viewing Log Information Command function The viewing log information command is used to view the multicast log information. Leave. and select Get Information  IGMP Config  IGMP Log in the shortcut menu. Property Read-only Read-only Read-only Read-only Read-only The preview flag of the subscriber Preview corresponding to the designated log record. including event records on joining / leaving the multicast group and watching the multicast program of subscribers on the ONU port. The number of the PON port corresponding to the designated log record. Read-only Includes Join. Read-only Includes Normal User and Preview User. Parameter Parameter Name Generate Time Slot No.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. ONU Port No.6. 3-68 Version: A . Then the IGMP Log window will appear. Access method Right-click the HSWA card in the object tree pane. and Auto Generate. The FE port number of the ONU corresponding to the designated log record. 30 Querying ONU Fast Leave Capability Command function The ONU fast leave capability query command is used to query whether the designated ONU has fast leave capability. The interval to automatically generate a subscriber watching log record.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Property Status of the event corresponding to the designated log record. Failure: Read-only Max Group Number Reach. Failure: VLAN Error. Failure: Max Group Number Reach. Failure: State Unauthentication. the system Read-only will automatically generate a log record on his / her watching. and select Get Information  IGMP Config  Onu Fast Leave Capability in the shortcut menu. 3. If a ’ subscriber s watching duration exceeds the Stay Time (min) automatic log generation interval. Access method Right-click the HSWA card in the object tree pane. Normal Leave. It is the value of Generate interval set in the Log Parameters window. Includes Success. Version: A 3-69 . Then the Onu Fast Leave Capability window will appear. Failure: Max Bandwidth Reach. and Force Leave.6. Failure: Preview Waiting. Double-click to ONU No. Compulsory drop-down list to select the value. Value Range / Requirement Property Configuration Method Click the The value range is 11 to 16. card connected with the ONU to be viewed. 4 or 1 to 8. 64. The number of the PON port The value range is 1 to connected with the ONU to be viewed. 3-70 Version: A . Double-click to Compulsory type the PON port number. The authorization number of the ONU The value range is 1 to to be viewed. PON No. Includes Capable and — Read-only — Incapable. Then the GSW IGMP Source Addr Table window will appear. type the Compulsory authorization number of the ONU. and select Get Information  IGMP Config  GSW IGMP Source Addr Table in the shortcut menu. Whether the ONU has fast leave Capability capability.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description The slot number of the PON interface Slot No.31 Querying Core Switch Card Multicast Source Address Table Command function The core switch card multicast source address query command is used to query the multicast source address information obtained by the core switch card. 3. Access method Right-click the HSWA card in the object tree pane.6. The ID value of the multicast VLAN containing the multicast group. Read-only Read-only Read-only 3-71 . If the multicast cascade port has been Group Member Port configured. the value of this parameter refers to the slot number of the uplink Slot card. Group IP VLAN Source Item Version: A The IP address of the multicast group. Under other conditions.3 GUI Reference of the HSWA Card Parameter Parameter Name Parameter Description Property If the multicast cascade port has been configured. the value of this parameter refers to the port number of the uplink Read-only card. the value here is null. The IP address of the multicast server. the value here refers to the slot number of the PON Read-only interface card connected with the subscriber watching the multicast program. Under other conditions. Users can create up to 256 profiles. and maximum bandwidth. 3-72 Version: A . voice service. service. broadband data — Compulsory Click the drop-down list to select the value. and integrated service. Access method Right-click the HSWA card in the object tree pane.7 Configuring a Profile 3. and the parameters to be configured include fixed bandwidth. Value Range / Requirement Property Configuration Method The value range: 1 to 32 characters.1 Configuring a GPON Service Bandwidth Profile Command function The GPON service bandwidth profile configuration command is used to configure a bandwidth assignment profile. and underlines.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. Then the GPON Service Bandwidth Config Profile window will appear. guaranteed bandwidth.7. The type of the service needing bandwidth assignment. Parameter Parameter Name Parameter Description The name of the Profile bandwidth assignment Name profile. and select Config  GPON Service Bandwidth Config Profile in the shortcut menu. and a profile name can only consist of Compulsory letters. TDM service. digital numbers. The bandwidth assignment profile is used to manually assign bandwidth for uplink services on various ONUs. Double-click to type the profile name. The service Service types include IPTV Type service. 2 Configuring a Data Service Profile Command function The data service profile configuration command is used to configure a common data service profile. The purpose of a common data service profile is described as follows: configuring the parameters such as the FE port status and the operating mode on an ONU. other services can use it.7. with the unit Bandwidth value and the being kbyte/s. The minimum bandwidth needed to provision the designated uplink service assured on the ONU. Double-click to type the The value range is 16 to 128000. resource. and adding VLAN tags for the uplink data service. on the ONU. The value of the fixed Compulsory bandwidth assigned to the designated uplink service default value is 16. Version: A 3-73 . 3. on the ONU. 32 to 128000. The assured Bandwidth default value is 64. Double-click to type the Compulsory maximum bandwidth assigned to the designated uplink service on the ONU. with the unit being kbyte/s. value cannot exceed the value of Maximum Bandwidth. If the Bandwidth designated uplink service (Kbyte/s) does not occupy the guaranteed bandwidth Double-click to type the The value range is 0. with the unit being kbyte/s. other services cannot occupy it either. The minimum bandwidth Compulsory needed to provision the designated uplink service default value is 0. Even if the Bandwidth designated uplink service (Kbyte/s) does not use the fixed bandwidth resource.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The fixed bandwidth assigned to the designated uplink service Fixed on the ONU. The maximum bandwidth assigned to the designated uplink service Maximum Bandwidth (Kbyte/s) on the ONU. The The value range is 16 to summation of the Fixed 128000. and click the Data Service Profile tab in the window that appears. and 1000 Mbit/s. Then the Data Service Profile window will appear. select the value. numbers. Speed (bit/s) 3-74 Selects the operating Optional. underlines. 100 Mbit/s. Its value includes: — Version: A . Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The value range: 1 to Profile Name The name of the data 32 characters. port. select the value. and Double-click to Compulsory type the name of the data service profile. Enables / disables the Auto Negotiation auto negotiation Click the function. The default value is Enable. rate of the designated When the auto Click the negotiation function is drop-down list to 10 Mbit/s. disabled. drop-down list to If the auto negotiation function is enabled. rate with other ports. Users profile name can only can create up to 256 consist of letters.AN5516-06 Optical Line Terminal Equipment GUI Reference This command is only valid for the GPON version of the AN5516-06. parameter is valid. digital profiles. the designated port will The default value is Disable. Compulsory It is recommended negotiate the possible that the default maximum transmission value be used. select Config  Service Profile Config in the shortcut menu. and a service profile. Click the drop-down list to Enables / disables the Enable/Disable designated port of the ONU. Compulsory It is recommended that the default value be used. this select the value. Access method Right-click the HSWA card in the object tree pane. If drop-down list to the rate control function Enable/Disable is enabled. Users Optional. the The default value is Port Rate Limit transmission rate of the Disable. Version: A 3-75 . with the unit Rate Limit uplink service on the being kbit/s. select the value. Compulsory It is recommended congestion control of that the default the port. select the value. Optional. cannot exceed the set threshold value. service on the designated port. can select the full Duplex Mode duplex mode (bi-directional — transmission) or the half When the auto Click the negotiation function is drop-down list to disabled. Enables / disables the rate control function of Click the the designated port. default value is 0. Compulsory It is recommended uplink / downlink service that the default on the designated port value be used. parameter is valid. Double-click to The maximum The value range is 0 to Upstream Port transmission rate of the 1000. The designated port. this of the uplink parameter is valid. type the When the rate control maximum function of a port is transmission rate enabled. duplex mode (unidirectional transmission). this select the value.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Configures the operating mode of the designated port. Click the Enables / disables the drop-down list to flow control function of Flow Control the designated port. so The default value is as to perform Disable. value be used. Optional. pre-translation service COS priority. service on the designated port. Untag indicates that the uplink packet is untagged. parameter should be consistent with the CVLAN ID. to Transparent. parameter should be consistent with the priority inside the PON. If CVLAN Mode is set to Translate. Tag indicates that the Click the — Compulsory drop-down list to select the value. uplink packet is tagged. this of the downlink parameter is valid. set to Untag. Its value includes Tag and Tag Mode Untag. this parameter is invalid. The value range is 0 to When Tag Mode is If CVLAN Mode is set 7. If CVLAN Mode is set to Translate. The value range is 1 to When Tag Mode is If CVLAN Mode is set 4085. 3-76 Version: A . pre-translation VLAN VLAN ID ID. this parameter is invalid. The tag mode of the uplink packet on the designated ONU. default value is 0. type the When the rate control maximum function of a port is transmission rate enabled. Double-click to type the VLAN ID value. this to Transparent.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Double-click to The maximum The value range is 0 to Downstream transmission rate of the 1000. with the unit Port Rate Limit downlink service on the being kbit/s. this parameter refers to the Optional. set to Untag. this parameter refers to the Optional. this Double-click to type its value as required. The designated port. this parameter should be configured as the CVLAN ID value to be added. The value range is 0 to 7. and the ONU. When Tag Mode is set Click the — Compulsory drop-down list to select the value. this parameter refers to the post-translation VLAN ID value. drop-down list to The encryption function is used to ensure security of The default value is Disable. If CVLAN Mode is set to TAG. transparent transmission. If CVLAN Mode is set to Transparent. type the CVLAN Compulsory processing priority of the data service. Double-click to Compulsory type the CVLAN ID value. this parameter can be set to Translate or Transparent. Double-click to The CVLAN processing COS of PON priority of the data service. Version: A 3-77 . When Tag Mode is set to Untag. to Tag.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Enables / disables the Down Encrypt State encryption function of Click the the downlink service. this CVLAN ID parameter refers to the The value range is 1 to VLAN ID value for 4085. select the value. If CVLAN Mode is set to Translate. this parameter can be set to Tag or CVLAN Mode Transparent. Compulsory It is recommended communication between that the default the line interface card value be used. 7. function. The service name Service Name configured in the local VLAN tab.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property QinQ configuration Method Click the Enables / disables the QINQ State Configuration — Compulsory drop-down list to select the value. this parameter is not valid. Configuring a Multicast Service Profile Command function The multicast service profile configuration command is used to configure a common multicast service profile. The parameters to be configured include the VLAN ID of the multicast data stream and the VLAN ID of the uplink / downlink multicast protocol message. 4085. The related configurations need Double-click to type the service VLAN name. SVLAN ID The SVLAN ID value of The value range is 1 to the data service. Double-click to type the SVLAN ID value of the data service. of 1 to 30 characters. The CVLAN processing COS of PON priority of the data service. 3. This command is only valid for the GPON version of the AN5516-06. When the QinQ function is disabled. this parameter is not The value can consist valid.3 The value range is 0 to 7. processing this parameter is not priority of the valid. data service. to be performed in the VLAN Local Config window. 3-78 Version: A . Optional. When the QinQ function is disabled. Optional Double-click to When the QinQ type the CVLAN function is disabled. Optional. 7. and underlines. select Config  Service Profile Config in the shortcut menu. used by the ONU Compulsory to receive the appointed multicast data stream. The tag mode of the downlink multicast data stream to the ONU port. 3-79 . Click the Tag indicates that the downlink multicast data — Compulsory drop-down list to select the value. numbers. and a profile name can only consist of letters. Untag indicates that the downlink multicast data stream passing through the ONU port is untagged. Users can create up to 64 profiles. COS Version: A Compulsory type the priority of the multicast data VLAN. downlink multicast data stream. Double-click to IGMP Data The priority of the The value range is 0 to VLAN multicast data VLAN. Its value includes Tag and IGMP Data VLAN Mode Untag. Then the IGMP Service Profile window will appear. Double-click to IGMP Data VLAN type the VLAN tag The VLAN tag used by the ONU to receive the The value range is 1 to appointed downlink 4085. Double-click to 32 characters. and click the IGMP Service Profile tab in the window that appears. Parameter Parameter Parameter Description Name Value Range / Property Requirement Configuration Method The value range: 1 to Profile Name The name of the multicast service profile. stream passing through the ONU port is tagged.3 GUI Reference of the HSWA Card Access method Right-click the HSWA card in the object tree pane. digital Compulsory type the name of the multicast service profile. VLAN If Multicast Protocol VLAN Mode is set to RETAG. TAG. configure this Optional. and REMOVE. 3-80 Version: A . this Double-click to type the value of this parameter. RETAG indicates that the system replaces the VLAN tag of the multicast protocol message with a new VLAN tag. REMOVE indicates that the system strips the VLAN tag of the multicast protocol message. RETAG. configure this parameter as the protocol IGMP Up VLAN ID value to be Protocol added. If Multicast Protocol VLAN Mode is set to TAG. parameter is invalid. multicast protocol message. TAG indicates that a VLAN tag is added in the The default value is TRANSPARENT. parameter as the new protocol VLAN ID value. Its value should be in If IGMP Protocol the range configured in VLAN Mode is set to the local service VLAN TRANSPARENT or data.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Description Name Value Range / Property Requirement Configuration Method The VLAN tag processing mode of the multicast protocol message passing through the ONU port. REMOVE. Its value includes TRANSPARENT. Click the Compulsory drop-down list to select the value. TRANSPARENT indicates that the multicast protocol IGMP Protocol VLAN Mode message is transmitted transparently. silence suppression. Double-click to If IGMP Protocol type the VLAN IGMP Up The VLAN processing Protocol priority of the uplink The value range is 0 to VLAN Mode is set to processing priority VLAN multicast protocol 7. this parameter is Double-click to type the value of this parameter. Its value should be in If IGMP Protocol Down If IGMP Protocol VLAN the range configured in VLAN Mode is set to Protocol Mode is set to REMOVE. as the old VLAN ID value (to be stripped) of the downlink query multicast protocol message. message. this multicast protocol parameter is invalid. If IGMP Protocol VLAN Mode is set to RETAG. speech encoding. TRANSPARENT or of the downlink TAG. invalid. this parameter is multicast protocol invalid. message. the local service VLAN TRANSPARENT or VLAN configure this parameter data.7. configure this parameter Optional. TRANSPARENT or of the uplink COS message.3 GUI Reference of the HSWA Card Parameter Parameter Description Name Value Range / Property Requirement Configuration Method Optional. message. DTMF mode. etc. TAG. Double-click to If IGMP Protocol type the VLAN priority of the downlink The value range is 0 to VLAN Mode is set to processing priority multicast protocol 7. REMOVE. Configuring a Voice Service Profile Command function The voice service profile configuration command is used to configure a common voice service profile. input / output gain. echo suppression. fax mode. The parameters to be configured include signaling VLAN. Version: A 3-81 .4 The VLAN processing Optional. IGMP Down Protocol VLAN COS 3. as the new protocol VLAN IGMP ID value. This command is only valid for the GPON version of the AN5516-06. select Config  Service Profile Config in the shortcut menu. Then the Voice Service Profile window will appear. The value range is 1 to 4085.711A. parameter includes G. that the default The value of this value be used. letters. Compulsory select the value. voice signaling flow. this parameter this parameter should be should be the CVLAN ID.729. and click the Voice Service Profile tab in the window that appears. in the range configured Double-click to Compulsory type the VLAN tag of the voice signaling flow. and a profile service profile. Parameter Parameter Name Parameter Description Value Range / Requirement Property The value range: 1 to 32 Profile Name The name of the voice characters. Users can name can only consist of create up to 64 profiles. digital numbers. G. and G. 3-82 Version: A . Configuration Method Double-click to Compulsory type the name of the voice service profile. the value of enabled. Selects the preferred speech encoding mode.AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Right-click the HSWA card in the object tree pane. G. the drop-down list to ONU will first select the The default value is default speech encoding G.711A. and underlines. and the default Signal VLAN ID The VLAN tag of the value is 1.711U. When the MGC appoints Voice Code Mode multiple speech Click the encoding modes. When the SVLAN is When the SVLAN is disabled. It is recommended mode. in the local service VLAN data.723. It is recommended flow. value be used. type the value of Compulsory the output gain. Click the echo suppression function. Click the Transparent indicates drop-down list to that the fax service is The default value is performed via the RTP Transparent. Is used to control The value range is -32 to Input the volume of the input 32. type the value of Compulsory the input gain. 3-83 . The default value is output gain value is. with the unit being Gain voice. Double-click to The value of the input gain. the 0.38 fax encoding mode. The higher the dB. the 0. value be used. The value of the output Double-click to gain. higher the volume is. value be used. Compulsory Cancel that the default save the bandwidth. The default value is input gain value is. Its value includes Fax Mode Transparent and T38. The higher the dB. It is recommended that the default conversation. Compulsory select the value.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The transmission mode of the fax service. that the default T38 indicates that the fax value be used. Compulsory select the value. It is recommended that the default higher the volume is. Is used to control The value range is -32 to Output the volume of the output 32. with the unit being Gain voice. It is recommended that the default value be used. Version: A It is recommended frames in the line and Enables / disables the Echo select the value. Its purpose is to The default value is Switch reduce number of mute Enable. service is performed in the T. Enables / disables the Click the silence suppression drop-down list to Silence function. Its purpose is to cancel echo in the drop-down list to The default value is Enable. service flow. Double-click to type the priority of the inner VLAN. 3. 7. The value range is 0 to 7. The common service profile is used to bind the bandwidth assignment profile to a certain ONU and bind the corresponding service profile to the designated port of this ONU. Compulsory select the value. SVLAN Enables / disables the State QinQ function. value be used. this of the voice parameter is invalid. Its value includes Transparent and Click the RFC2833.5 drop-down list to Double-click to type the priority of the outer VLAN. DTMF Mode Transparent indicates that the DTMF signal is transported via the RTP drop-down list to The default value is Transparent. Configuring a Service Profile Command function The service profile configuration command is used to configure a common service profile. Optional.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Is used to configure the DTMF encoding mode. Its value should be in the range configured in the local service VLAN data. Optional. Click the — Compulsory select the value. Double-click to When the SVLAN type the SVLAN ID function is disabled.7. Optional. It is recommended that the default flow. 4085. function is disabled. COS 2 The priority of the inner The value range is 0 to When the SVLAN VLAN. When the SVLAN function is disabled. 3-84 Version: A . The value range is 1 to SVLAN ID The SVLAN ID of the voice service flow. this parameter is invalid. this parameter is invalid. COS 1 The priority of the outer VLAN. RFC2833 indicates that that the DTMF signal is encoded via the RFC2833 standard. HG260. and Double-click to Compulsory type the name of the service profile. AN5506-09-A1 / B1. AN5006-16. ONU Type — Compulsory AN5506-07-B / A1 / B1 drop-down list to select the value. / A2. AN5506-06-E. Access method Right-click the HSWA card in the object tree pane. digital numbers.3 GUI Reference of the HSWA Card Before configuring a service profile. underlines. and a profile. and click the Service Profile tab in the window that appears. This command is only valid for the GPON version of the AN5516-06. users need to complete configuration of the bandwidth assignment profile and the corresponding service profile. ONU Subprofile Config Version: A Click the Profile Selects Bandwidth Type Assignment Profile. 3-85 . Then the Service Profile window will appear. Parameter Parameter Name Parameter Value Range / Description Requirement Property Configuration Method The value range: 1 to Profile Name The name of the service 32 characters. profiles. Users can profile name can only create up to 256 consist of letters. Selects the type of the ONU that the service profile is to be bound with. The ONU type to be selected includes: Click the AN5506-04-A / B / C1. AN5506-10-A1 / B1. AN5006-15. — Compulsory drop-down list to select the value. select Config  Service Profile Config in the shortcut menu. Click the The type of the Profile corresponding service Type profile to be bound with Compulsory to select the value. Profile Config drop-down list The profile name Profile configured in the Name corresponding service — profile. ONU Port Compulsory.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Value Range / Description Requirement Property Configuration Method Compulsory. window. Double-click to type the The number of the port that the corresponding Port No. This parameter should use the value configured in the Data / IGMP / Voice Service Profile Click the drop-down list to select the value. number of the The value range depends on the value Compulsory of ONU Type. port that the corresponding service profile is to be bound with. window. 3-86 Version: A . Profile Name The profile name This parameter configured in the should use the value corresponding configured in the bandwidth assignment GPON Service profile. the ONU port. so as to apply the bandwidth assignment and service configuration in this service profile to the ONU.7.6 Binding a Service Profile Command function The service profile binding command is used to bind a service profile with the designated ONU. Click the The type of the port actually used by the Port Type ONU configured via — Compulsory drop-down list to select the value. Bandwidth Profile Click the drop-down list to select the value. service profile is to be bound with. ONU Type. 3. 3 GUI Reference of the HSWA Card Before binding a service profile, users need to complete configuration of the service profile. This command is only valid for the GPON version of the AN5516-06. Access method Right-click the HSWA card in the object tree pane, select Config  Service Profile Config in the shortcut menu, and click the Service Profile Binding tab in the window that appears. Then the Service Profile Binding window will appear. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Compulsory. Profile ID The name of the service profile. The value should consist of 1 to 32 characters. This parameter should Click the use the value drop-down list configured in the to select the Service Profile value. window. Click the drop-down list to select the Selects whether the Action designated service The default value is profile is bound with the Refresh. Compulsory ONU. value. Its value includes Refresh, Bind, and Unbind. Read-only. The system reads its The number of the slot Slot No. containing the interface card connected with the — ONU. value automatically, via the parameter — corresponding to ONU No. Read-only. The system reads its PON No. The number of the used PON port on the ONU. — value automatically, via the parameter — corresponding to ONU No. Version: A 3-87 AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Click to enter the configuration GUI of ONU The number of the ONU ONU No. that the service profile is to be bound with. — Compulsory No., and then select the ONU that the service profile is to be bound with. 3-88 Version: A 3 GUI Reference of the HSWA Card 3.8 Configuring QinQ 3.8.1 Configuring a QinQ Profile Command function For an FTTB ONU, the QinQ profile configuration command is used to configure the SVLAN. The SVLAN is used to provide filtering conditions for the uplink service flow that needs configuration of outer data service VLAN on the ONU. The QinQ profile configuration is used to filter the uplink service flow on the ONU port of an FTTB ONU, but it is invalid for an FTTH ONU. In a QinQ profile, users can configure up to eight rule domain types at the same time. Access method Right-click the HSWA card in the object tree pane, and select Config  QinQ  QinQ Profile in the shortcut menu. Then the QinQ Profile window will appear. Version: A 3-89 AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Parameter Value Range / Name Description Requirement Property Configuration Method The value range: 1 to Profile Name The name of the QinQ 16 characters, and a profile. Users can profile name can only create up to 1024 consist of letters, profiles. digital numbers, and Double-click to Compulsory type the name of the QinQ profile. underlines. The rule domain type of the QinQ profile. Its value includes: Based On SMAC, Based On DMAC, Based On SIP, Based On DIP, Based Rule Type On VLAN ID, Based Click the On Ethernet, Based drop-down list to On IP Protocol Type, select the value. Based On Ethernet Priority, Based On IP TOS/DSCP (IPv4), Based On L4 SPORT, and Based On L4 Rule DPORT. Type — Compulsory According to the appointed value of Rule Type, users can Operator select one of the Click the following seven drop-down list to operators: =, !=, <=, >=, select the value. Exist Match, Not Exist Match, and Always Match. According to the Rule Value appointed value of Double-click to Rule Type, users can type the value of set the corresponding the rule domain. rule domain value. 3-90 Version: A 3 GUI Reference of the HSWA Card 3.8.2 Configuring an OLT QinQ Domain Command function The OLT QinQ domain configuration command is used to process the layer 1 to layer 4 VLAN tags of the uplink service flow to the OLT. The processing operations include transparent transmission, tagging, translation, etc. In an OLT QinQ domain, users can configure up to eight (EPON) / four (GPON) uplink / downlink rule clauses at the same time. Access method Right-click the HSWA card in the object tree pane, and select Config  QinQ  OLT QinQ Domain in the shortcut menu. Then the OLT QinQ Domain window will appear. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The value range: 1 to 16 characters, Domain Name The name of the OLT QinQ and a domain domain. Users can create up name can only to 1024 OLT QinQ domains. consist of letters, Double-click to Compulsory type the name of the OLT QinQ domain. digital numbers, and underlines. Click the drop-down list The type of the uplink service Service Type to the OLT. Its value includes Independent and Share. to select the The default value is Independent. Compulsory value. It is recommended that the default value be used. Version: A 3-91 AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Binds the uplink data with the port according to the data type. Its value includes: Click the Bind SMAC, DMAC, SIP, DIP, drop-down list Type VLAN ID L1-L4, Ethernet to select the Type, Service Type, Protocol value. Type, LLT, L4 SPORT, L4 DPORT, and Priority 1-4. According to the appointed Up value of Bind Type, users can Clause — Compulsory select one of the following Operator Click the drop-down list eight operators: Always Not to select the Match, =, !=, <=, >=, Exist value. Match, Not Exist Match, and Always Match. According to the appointed Rule value of Bind Type, users can Value set the corresponding binding Double-click to type the binding value. value. Binds the downlink data with the port according to the data type. Its value includes: Click the Bind SMAC, DMAC, SIP, DIP, drop-down list Type VLAN ID L1-L4, Ethernet to select the Type, Service Type, Protocol value. Type, LLT, L4 SPORT, L4 DPORT, and Priority 1-4. According to the appointed Down value of Bind Type, users can Clause select one of the following Operator eight operators: Always Not Match, =, !=, <=, >=, Exist Match, Not Exist Match, and — Compulsory Click the drop-down list to select the value. Always Match. According to the appointed Rule value of Bind Type, users can Value set the corresponding binding value. 3-92 Double-click to type the binding value. Version: A 3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The VLAN ID value that has been transmitted transparently in uplink direction. When Action is set to Translate, this parameter refers to the pre-translation VLAN ID value. When Action is set to Optional. Transparent, this parameter Old-CVLAN VLAN LN (N=1, 2, 3, 4) has the following meanings: 0 indicates that the VLAN of this layer does not exist (for The value range is 0 to 4085 or null. When Action is Double-click to set to Add, this type the VLAN parameter is ID value. invalid. layer 1 of a subscriber, its VLAN ID cannot be set to 0). A certain value between 1 and 4085 indicates that the corresponding VLAN ID is transmitted transparently. Null indicates that the VLAN ID is transmitted transparently fully, without any processing. The VLAN priority value that has been transmitted transparently in uplink direction. When Action is set to Translate, this parameter Old CVLAN COS LN (N=1, 2, 3, 4) refers to the pre-translation VLAN priority value. When Action is set to Transparent, this parameter refers to the priority value of The value range is 0 to 7. 7 means the highest priority, and 0 means the lowest priority. Optional. When Action is Double-click to set to Add, this type the VLAN parameter is priority value. invalid. the original customer VLAN that has been transmitted transparently in uplink direction. Version: A 3-93 AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Its value depends on the value of layer N of the customer VLAN. If layer N of the customer Click the VLAN has parameters, Action Action should be set to Transparent — Compulsory or Translate. drop-down list to select the value. If layer N of the customer VLAN has no parameters, Action should be set to Transparent or Add. Double-click to type the TPID The value range is TPID The TPID of the VLAN tag. 1 to 65534, and the default value is of the VLAN. Compulsory It is recommended 33024. that the default value be used. The priority of the newly-added VLAN. Cos When Action is set to The value range is Optional. Translate, this parameter 0 to 7. 7 means When Action is refers to the post-translation the highest set to VLAN priority value. priority, and 0 Transparent, When Action is set to Add, means the lowest this parameter this parameter refers to the priority. is invalid. Double-click to type the priority value. priority value of the newly-added VLAN. The ID value of the newly-added VLAN. New VID When Action is set to Optional. Translate, this parameter When Action is refers to the post-translation The value range is set to VLAN ID value. 1 to 4085. Transparent, When Action is set to Add, this parameter this parameter refers to the ID is invalid. Double-click to type the new VLAN ID value. value of the newly-added VLAN. 3-94 Version: A 3 GUI Reference of the HSWA Card 3.8.3 Configuring a GPON OLT VLAN Operation Table Command function The GPON OLT VLAN operation table configuration command is used to translate the single-tagged VLAN of the uplink data service flow to the OLT and add the outer VLAN ID, so as to implement the QinQ function of the data service. This command is only valid for the GPON version of the AN5516-06. Access method Right-click the HSWA card in the object tree pane, and select Config  QinQ  GPON OLTVLAN Opreation Table in the shortcut menu. Then the GPON OLTVLAN Opreation Table window will appear. Parameter Parameter Name Domain Name Parameter Description Value Range / Requirement Property Configuration Method The name of the GPON The value range: 1 to 16 Double-click to OLT VLAN operation characters, and a table type the name of table. Users can create name can only consist of up to 4096 operation letters, digital numbers, VLAN operation tables. and underlines. table. Compulsory the GPON OLT Compulsory. The value of this parameter should be the The pre-translation VLAN VLAN ID ID value of the uplink The value range is 1 to VLAN to the OLT and for 4085. translation. same as the Double-click to outer VLAN ID type the VLAN configured in the ID value. ONU port service configuration window. Version: A 3-95 AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Optional. Priority The translation priority When the inner value of the downlink VLAN is not Double-click to translated, this type the priority card for translation of parameter does value. inner VLAN. not need VLAN to the line interface The value range is 0 to 7. configuration. Optional. When the outer Outer VLAN COS The priority of the SVLAN. The value range is 0 to 7. VLAN is not Double-click to added, this type the priority parameter does of the SVLAN. not need configuration. Optional. When the outer Outer VLAN Vid Is used to add the SVLAN The value range is 1 to value. 4085. VLAN is not Double-click to added, this type the VLAN parameter does ID value. not need configuration. Optional. When the inner VLAN is not The translation priority Inner VLAN COS value of the inner VLAN The value range is 0 to 7. translated, this parameter does of the uplink service flow. not need Double-click to type the translation priority value. configuration. Optional. Is used to translate the When the inner inner VLAN of the uplink service flow from the Inner VLAN Vid ONU. When translation is needed, this parameter refers to the post-translation VLAN ID. 3-96 VLAN is not The value range is 1 to translated, this 4085. parameter can keep the same Double-click to type the VLAN ID value. as VLAN ID or be set to null. Version: A 3 GUI Reference of the HSWA Card 3.9 Configuring QoS 3.9.1 Configuring a QoS Profile Command function The QoS profile configuration command is used to configure flow rules such as VLAN ID, port, Ethernet protocol type, priority queuing, and DSCP value. Based on these flow rules, the system can control the data stream, so as to provide network services with different QoS levels. When configuring the IP flow classification parameters in a QoS profile, users can perform the combined configuration, but they cannot combine these parameters randomly. The allowed IP flow classification parameter groups are described as follows; in the same group, the parameters can be combined as required:  SIP, DIP, Protocol Type, TCP/UDP SPORT, TCP/UDP DPORT;  SMAC, DMAC, Ethernet Type, Priority Domain, VID;  SMAC, SIP, Ethernet Type, Priority Domain, VID;  DMAC, DIP, Ethernet Type, Priority Domain, VID. Access method Right-click the HSWA card in the object tree pane, select Config  QoSProfiles in the shortcut menu, and click the QoSProfiles tab in the window that appears. Then the QoSProfiles window will appear. Version: A 3-97 Dst IP used to classify The default value is and filter the 0. and a profile name Users can can only consist of create up to letters. address. used to When the IP-address-based flow classify and filter the data service The default value is 0. The source IP Optional. underlines. 3-98 When the IP-address-based flow rule is configured to filter the service flow. Version: A .0. flow. used to VLAN ID classify and filter the data service Src IP Optional.255. IP address. QoS profile. users must configure this parameter. The destination Optional.255. Double-click to type the source IP address. Double-click to type the destination IP address. The VLAN ID value.0. The value range is 1 to 4085. users must configure this parameter. users must configure this parameter. address is set.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Parameter Value Range / Name Description Requirement Property Configuration Method The value range: 1 Name The name of the to 20 characters. used to classify and filter the Optional. The default value is If the source IP 255.255.0.0. When the IP-address-based flow rule is configured to filter the service flow. parameter.0. address mask must be configured. data service Src IP MASK flow.0. data service flow. When the VLAN-ID-based flow rule Double-click to is configured to filter the service type the VLAN flow. flow. the source IP Double-click to type the source IP address mask. numbers. The source IP address mask. and Double-click to Compulsory type the name of the QoS profile. rule is configured to filter the service flow. digital 1024 profiles. users must configure this ID value. users must configure this parameter. MAC address. Click the flow. The priority of Priority the data service The value range is Optional. Double-click to type the source MAC address. The When the priority-based flow rule is drop-down list classify and filter default value is configured to filter the service flow. users must configure this to the Ethernet parameter. data service rule is configured to filter the service flow. used to classify and filter the The value range is 0 to 65534. users must configure this parameter. IP address is When the IP-address-based flow rule is configured to filter the service flow. Double-click to type the destination MAC address. Src MAC used to classify The default value is and filter the 00-00-00-00-00-00. Optional. The source Optional. used to 0 to 7 or null. type. Dst MAC When the MAC-address-based flow used to classify The default value is and filter the 00-00-00-00-00-00. users must configure this parameter. flow. Double-click to When the Ethernet-type -based flow type the value rule is configured to filter the service corresponding flow.255. flow. flow. The value corresponding to the Ethernet type of the data Ethernet Type service flow. The destination Optional.3 GUI Reference of the HSWA Card Parameter Parameter Value Range / Name Description Requirement Property Configuration Method The destination IP address mask. used to classify and filter Optional. data service flow. MAC address. the source Double-click to type the destination IP address mask. users must configure this parameter. value.255.255. to select the the data service null. The default value is If the destination 255. the data service Dst IP Mask flow. data service When the MAC-address-based flow rule is configured to filter the service flow. IP address mask must be configured. Version: A 3-99 . set. The destination Double-click to port number corresponding Optional. layer protocol Protocol Type type of the data The value range is service flow. flow rule is configured to filter the service flow. and filter the Double-click to type the value corresponding to the network layer protocol type. to the transport TCP/UDP Src Port layer TCP / UDP protocol type of the data service When the TCP / The value range is UDP-source-port-number-based 0 to 65534. flow. used to this parameter. The source port Double-click to number corresponding Optional. used to classify When the protocol-type -based flow rule is configured to filter the service flow. 3-100 Version: A . users must configure this parameter.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Value Range / Name Description Requirement Property Configuration Method The value corresponding to the network Optional. flow rule is configured to filter the service flow. users must configure this parameter. classify and filter type the source port number corresponding to the transport layer TCP / UDP protocol type. to the transport TCP/UDP Dst Port layer TCP / UDP protocol type of the data service flow. used to classify and filter the data service When the TCP / The value range is UDP-destination-port-number-based 0 to 65534. type the destination port number corresponding to the transport layer TCP / UDP protocol type. data service flow. 1 to 255. the data service flow. users must configure flow. Double-click to Users can configure this parameter type the rate as required. configured to filter the service flow. Among the three values. users must configure this parameter.3 GUI Reference of the HSWA Card Parameter Parameter Value Range / Name Description Requirement Property Configuration Method If the IP protocol is used. Controls the transmission Rate Limit Num (64kbit/s) rate of the data service flow meeting the filtering conditions. It is used to classify Optional. — Compulsory Discard. 3-101 . data service flow. it indicates that the Optional. Forward and Discard mean two policy types. and filter the Double-click to type the DSCP value. dscp: differential services code point. Version: A The value range is 1 to 160000 in the step of 64 kbit/s. The value range is When the DSCP-based flow rule is 0 to 63 or null. Processes the data service flow meeting the filtering conditions. Null. rate threshold is 64 kbit/s. when the value is 1. this parameter refers to the first six bits in the TOS domain at the head of an DscpParameter IP message. Its Click the value includes CMD Forward. value. and drop-down list to select the value. For example. the target port. acting as the will be re-direction forwarded port. 3-102 Version: A . function.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Value Range / Name Description Requirement Property Configuration Method Re-configures the priority of Queue the data service The value range is flow meeting the 0 to 7 or null. — Users can configure this parameter as required. the check box to enable / disable the flow mirroring function. filtering conditions. When the target Flow Mirror DstPorts port of flow Click the mirroring is drop-down list configured. Double-click to Users can configure this parameter type the DSCP as required. the The value range Optional. Optional. value. but ports. this parameter is invalid. acting as the source port can target port of be mirrored to flow mirroring. Re-configures the DSCP value of the data DSCP service flow meeting the The value range is 0 to 63 or null. to select the data stream includes all uplink When the flow mirroring function is uplink port through the ports. When the re-direction port New Port is configured. conditions. enabled. this parameter is valid. enabled. Users can configure this parameter as required. Click the drop-down list to select the value. to select the through the includes all uplink When the flow mirroring function is uplink port source port. filtering Optional. Click the the data stream drop-down list will not pass The value range Optional. Select or clear Enables / Flow Mirror disables the flow Enable mirroring Optional. directly via the re-direction port. Version: A 3-103 . Read-only. and click the Slot Attach/Detach QoS tab in the window that appears. select Config  QoSProfiles in the shortcut menu. It is the profile name configured in the QOS — Template window. users need to complete configuration of the QoS profile. The name of the QoS Profile profile that needs to be Name bound / unbound with — the line interface card. Configuration Method Double-click to Compulsory type the slot number. Click the Action Performs the binding / unbinding operation. — Compulsory drop-down list to select the value (Bind or Unbind). — Compulsory / unbind the profile with the line interface card.2 Binding / Unbinding a QoS Profile with a Slot Command function The QoS profile binding / unbinding with slot command is used to bind / unbind a QoS profile with a line interface card. Access method Right-click the HSWA card in the object tree pane. Before binding / unbinding a QoS profile with a slot.: service card joining the The value range is 11 to binding / unbinding 16.3 GUI Reference of the HSWA Card 3. operation. Select or clear the check box to bind Selects whether the Bind or profile is to be bound or Unbind unbound with the line interface card. Parameter Parameter Name Parameter Description Value Range / Requirement Property The slot number of the Slot No. After the designated QoS profile is bound with a line interface card. the uplink data stream through this line interface card will be processed according to this QoS profile.9. Then the Slot Attach/Detach QoS window will appear. 3 Binding / Unbinding a QoS Profile with an Uplink Port Command function The QoS profile binding / unbinding with uplink port command is used to bind / unbind a QoS profile with an uplink port. of the service Compulsory slot joining the binding / operation. drop-down list to — Compulsory select the value (Bind or Unbind). users need to complete configuration of the QoS profile.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. service slot joining the The value range is 11 to binding / unbinding 16. Click the Action Performs the binding / unbinding operation. Before binding / unbinding a QoS profile with an uplink port. Version: A . Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Double-click to type the number The number of the Slot No. the downlink data stream through this uplink port will be processed according to this QoS profile. select Config  QoSProfiles in the shortcut menu. and click the Port Attach/Detach QoS tab in the window that appears. Read-only. Access method Right-click the HSWA card in the object tree pane. 3-104 — It is the value configured in the QOS — Template window. unbinding operation. Then the Port Attach/Detach QoS window will appear.9. The name of the QoS Profile Name profile that needs to be bound / unbind with the uplink port. After the designated QoS profile is bound with an uplink port. 3. and they are processed by a certain proportion at the same time. but when the system processes higher-priority services.1D user priority labels. and select Config  Priority Mode in the shortcut menu. Access method Right-click the HSWA card in the object tree pane. In this mode. the system first processes higher-priority services. Version: A 3-105 . The switch chip in the core switch card maps the uplink and downlink services into different priority queues according to the IEEE 802. Each port supports eight priority queues.  Weighted priority is a weighted round robin queue scheduling mechanism. lower-priority services are not blocked completely.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property profile is to be bound or Unbind unbound with the uplink the check box to — Compulsory port. Configuring / Querying Priority Mode Command function The priority mode configuration / query command is used to configure or query the priority mode of data forwarding of the switch chip in the core switch card.9. and performs scheduling of the uplink and downlink services.4 Method Select or clear Selects whether the Bind or Configuration bind / unbind the profile with the uplink port.  Strict priority ensures that higher-priority services are always processed prior to lower-priority services. Then the Priority Mode window will appear.  Mixed priority includes strict priority and weighted priority. algorithm or the weighted priority algorithm. The queue scheduling algorithm corresponds to the priority mode. The service processing bandwidth assignment proportion. Priority. processing. Queue Schedule Method Compulsory. Weight Priority. Strict Priority. The value range is 1 to When Mode is set to 15. 3-106 Version: A . the priority queues 0 to 5 — can use the strict priority When Mode is set to Click the Strict Priority or drop-down list to Weight Priority. Double-click to type the weight value. the Priority system makes each — Read-only — message enter the corresponding queue and receive processing of corresponding QoS level. When Mode is set to Mixed Priority. and Mixed Priority.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The priority mode of data forwarding of the switch chip in the core Model switch card. parameter is invalid. the more bandwidth it occupies for Compulsory. Click the Compulsory drop-down list to select the value. this select the value. Each port supports eight priority queues. According to the configured mapping relationships and priority Queue of a message. this parameter is invalid. The default value is Its value includes: Strict Weight Priority. The higher Weight the weight value of a service is. etc. rule name can only Users can create up to consist of letters. Its value includes: Based On SMAC. and a classification rule. Based On Rule Rule VLAN ID. Based On IP Protocol Type.5 Configuring Flow Classification Rule Command function The flow classification rule configuration command is used to configure flow rules (based on source / destination MAC address.3 GUI Reference of the HSWA Card 3. and Configuration Method Double-click to type the name of Compulsory the flow classification rule.). Based On L4 SPORT. based on source / destination IP address. Based On DMAC. and Based On TTL. Based Click the — Compulsory drop-down list to select the value. Based On L4 DPORT. Parameter Parameter Parameter Value Range / Name Description Requirement Property The value range: 1 to Rule Name The name of the flow 20 characters. digital 253 rules. On Ethernet Priority. so as to filter the uplink service flow entering an ONU port. Based On DIP. Then the Flow Classification Rule window will appear.9. underlines. and select Config  Flow Classification Rule in the shortcut menu. Access method Right-click the HSWA card in the object tree pane. Based On Type Type Ethernet. Based On SIP. Based On IP TOS/DSCP (IPv4). numbers. The rule domain type of the flow classification rule. Version: A 3-107 . Rule Value 3. Access method Right-click the HSWA card in the object tree pane. value. users need to complete configuration of the flow classification rule. Before configuring the traffic policy. >=. users can corresponding set the corresponding rule domain rule domain value. select the value. users can Operator select one of the Click the following seven drop-down list to operators: =. 3-108 Version: A . and Always Match.9. !=. <=.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Value Range / Name Description Requirement Property Configuration Method According to the appointed value of Rule Type.6 According to the Double-click to appointed value of type the Rule Type. and select Config  Flow Policy in the shortcut menu. Not Exist Match. Then the Flow Policy window will appear. so as to guarantee the QoS. Its purpose is described as follows: Bind the ONU port and perform access control and flow control of the uplink service flow entering an ONU port. Configuring Traffic Policy Command function The traffic policy configuration command is used to apply the defined flow classification rule to the traffic policy. Exist Match. and a rule name can only consist of letters. only Optional. characters.3 GUI Reference of the HSWA Card Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The value range: 1 to 20 Policy Name The name of the traffic policy. use the value configured in the Flow Classification Rule Click the drop-down list to select the value. numbers. Compulsory. — When ACL Enable is set to Enable. This parameter cannot ACL Enable Enables / disables the access control function. This parameter should The name of the flow Rule ID classification rule to be — bound with. — be set to Enable Click the together with drop-down list to RateLimit. Filters and forwards the service flow entering the ONU port. 12 means the of the designated traffic highest priority. and other flows are discarded. window. this parameter is valid. Click the drop-down list to select the value. Its values are described as follows: Allow: In this mode. and other flows can be forwarded. and CoS Remark. priority. Optional. and underlines. Version: A 3-109 . and 1 policy. the flow matching the Forward rule can be forwarded. Enable. digital Double-click to Compulsory type the name of the traffic policy. the flow matching the rule is discarded. Forbid: In this mode. means the lowest Double-click to Compulsory type the processing priority value. Queue select the value. Users can create up to 128 flow policies. The value range is 1 to Precedence The processing priority 12. unit being byte. maximum cell rate The value range is 0 to 4294967294. that users configure this parameter. value. Configuration Method Click the drop-down list to select the value. The traffic. with the unit When RateLimit is set traffic. The default to Enable. Double-click to type the The maximum cell rate PIR (kbit/s) value that cannot be exceeded. parameter is valid. so as to be set to Enable with perform rate control of — ACL Enable. being kbit/s. Double-click to type the minimum transmission rate. flow rate control This parameter cannot function. being byte. Double-click to type the size of the excess burst The value range is 0 to EBS (Byte) The size of the excess 4294967294. The minimum 100000. Reserved It is not recommended that users configure this parameter. and CoS the ONU port. The default to Enable. Double-click to type the size of the burst traffic. with the burst traffic. Reserved It is not recommended default value is 0. Remark also enabled. Queue the service flow entering Enable. with the unit being kbit/s. The value range is 0 to Optional. parameter is valid. The default value is 0.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name RateLimit CIR (kbps) CBS (Byte) Parameter Description Value Range / Requirement Property Enables / disables the Optional. this value is 0. 3-110 Version: A . The size of the burst less than 0. with the unit When RateLimit is set transmission rate. The value range is not Optional. this value is 0. this with the lowest priority. When Queue Enable Mapped into according to its and 0 means the queue is set to Enable. The value range is 0 to The queue that the 7. Version: A 3-111 . 7 means the queue Optional. to its priority. Optional. with the lowest priority. parameter is valid. Modifies the CoS priority with the highest priority. The value range is 0 to CoS 7. this priority. can be modified. the type the queue that the service flow is mapped into. re-tagging function. Enable and RateLimit. The default value is 0. Enables / disables the When the re-tagging Remark function is enabled. The default value is 0. Queue service flow is mapped with the highest priority. 7 means the queue Optional. the service flow — ACL Enable and is mapped into the RateLimit also priority queue according enabled. and 0 means the queue set to Enable. Click the drop-down list to select the value. parameter is valid. When the queue This parameter cannot Queue mapping function is be set to Enable with Enable enabled. Optional. COS Double-click to — priority of a service flow This parameter cannot Click the be set to Enable drop-down list to together with ACL select the value. Double-click to type the CoS priority value.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Enables / disables the queue mapping function. When COS Remark is tag. 10.10 Managing a DBA Profile 3. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The value range: 1 to DBA Profile name The DBA profile name. and performs dynamic bandwidth assignment via binding the SLA configuration profile. Then the DBA Configuration Profile window will appear. 3-112 Version: A .1 Configuring a DBA Configuration Profile Command function The DBA configuration profile configuration command is used as follows: Filters the uplink service flow entering the ONU port. and select Config  DBA Profile Manage  DBA Configuration Profile in the shortcut menu. underlines. Before configuring a DBA configuration profile. and Double-click to Compulsory type the DBA profile name. users need to complete configuration of the flow classification rule and the SLA configuration profile. digital numbers. Users can create up to 1022 profiles. Access method Right-click the HSWA card in the object tree pane. so as to increase the uplink bandwidth utilization ratio of the system and guarantee fairness and QoS of the service.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. and a profile name can only consist of letters. 20 characters. 3. — use the SLA Click the configuration profile drop-down list to name configured in the select the value.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Compulsory. SLA Config Profile window. Compulsory. This parameter should Flow The name of the flow Classification classification rule profile Rule Profile to be bound with. and select Config  DBA Profile Manage  SLA Configuration Profile in the shortcut menu. Then the SLA Configuration Profile window will appear. Version: A 3-113 . use the flow — classification rule profile name configured in the Flow Click the drop-down list to select the value.2 Configuring a SLA Configuration Profile Command function The SLA configuration profile configuration command is used to configure bandwidth for the uplink / downlink service flow of the ONU according to the SLAs of different subscribers. This parameter should LLID SLA The name of the SLA Profile profile to be bound with. Classification Rule window.10. Access method Right-click the HSWA card in the object tree pane. The minimum guaranteed bandwidth that the ONU can obtain. Up PIR (kbit/s) 3-114 The maximum The value range is 256 bandwidth that the ONU to 10000000. with flow of an ONU does not the unit being kbit/s. and a profile name can only consist of letters. When the uplink service 256 to 10000000. used to unit being kbit/s. The transmit the uplink default value is service flow of the ONU. Double-click to Compulsory type the bandwidth value. used to transmit the uplink service flow of the Up CIR (kbit/s) ONU. characters. 1000000. digital Double-click to Compulsory type the SLA profile name. 640. with the can obtain. The value range is 0.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The value range: 1 to 20 LLID SLA The SLA profile name. Profile Users can create up to name 1020 profiles. numbers. Version: A . reach the minimum The default value is guaranteed bandwidth. and underlines. the system can assign the remaining bandwidth for uplink services of other ONUs via the DBA mechanism. Double-click to Compulsory type the bandwidth value. Performs the polling Up Polling level level scheduling of the The value range is 0 to LLID of the ONU. with the unit (kbit/s) transmit uplink service being kbit/s. Double-click to When Mode is set to type the Common. Double-click to When Mode is set to type the Common. 0 means the highest level. The value range is 0 to Up FIR When an ONU does not 10000000. used to transmit the uplink service flow of the ONU. The default flow. Version: A 3-115 . value. value.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The fixed bandwidth that the ONU can obtain. this scheduling level parameter is invalid. The default value is 5. this ONU still can value is 0. Double-click to When Mode is set to type the Common. 0 means the highest The system will first level. Optional. and 7 means the lowest level. The default value is 1. and 7 means the lowest level. The system will first assign bandwidth for the uplink service with a The value range is 0 to 7. Double-click to Compulsory type the bandwidth value. obtain the fixed bandwidth. high level. The system will first assign bandwidth for the uplink service with a The value range is 0 to 7. this scheduling level parameter is invalid. and 7 means the assign bandwidth for the lowest level. value. Performs the minimum bandwidth level Up min Scheduler level scheduling of the LLID of the ONU. high level. 0 means the highest level. The default uplink service with a value is 1. Optional. Optional. high level. 7. and this fixed bandwidth cannot be used by other ONUs. Performs the maximum bandwidth level Up max Scheduler level scheduling of the LLID of the ONU. this scheduling level parameter is invalid. high level. The value range is 256 to 10000000. value. When the downlink The value range is 256 Optional. When Mode is set to Common. this scheduling level parameter is invalid. used to (kbit/s) transmit the downlink service flow of the ONU. high level. Optional. and 7 means the lowest level. value. 7. this parameter is invalid. The maximum bandwidth that the ONU Dn PIR can obtain. 3-116 Version: A . Dn CIR service flow of an ONU to 10000000. bandwidth. Double-click to type the bandwidth value. The default value is 5. Double-click to type the bandwidth value. Double-click to When Mode is set to type the Common. The system will first assign bandwidth for the downlink service with a The value range is 0 to 7. The default downlink service with a value is 1.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The minimum guaranteed bandwidth that the ONU can obtain. with the unit being kbit/s. 0 means the highest level. Double-click to When Mode is set to type the Common. parameter is invalid. the system can assign the remaining bandwidth for uplink services of other ONUs via the DBA mechanism. Optional. Performs the maximum bandwidth level Dn max Scheduler level scheduling of the LLID of the ONU. this scheduling level parameter is invalid. Optional. and 7 means the level assign bandwidth for the lowest level. this minimum guaranteed default value is 640. used to transmit the downlink service flow of the ONU. 0 means the highest Scheduler The system will first level. The default value is1000000. Performs the minimum bandwidth level scheduling of the LLID of The value range is 0 to Dn min the ONU. with the When Mode is set to (kbit/s) does not reach the unit being kbit/s. The Common. and select Config  DBA Profile Manage  DBA Profile refresh in the shortcut menu. Version: A 3-117 .3 Refreshing a DBA Profile Command function The DBA profile refreshing command is used to refresh configuration of a DBA profile. they should select Advanced. (kbit/s) and use the default values of other parameters. Before refreshing a DBA profile. they can select Common. Up PIR Click the — (kbit/s). Then the DBA Profile refresh window will appear. Mode If users only configure Up CIR (kbit/s).3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property Configuration Method If users need to adjust the bandwidth assignment parameters accurately. Its function is described as follows: After a DBA profile is bound with the designated ONU. and Up FIR Compulsory drop-down list to select the value. Access method Right-click the HSWA card in the object tree pane.10. if its configuration is modified. users need to complete configuration of the DBA configuration profile. 3. users can perform the DBA profile refreshing command to apply the modified DBA profile configuration to the ONU. — the DBA profile name configured in the DBA Configuration Profile Click the drop-down list to select the value. window.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Compulsory. 3-118 Version: A . This value should use DBA Profile The name of the DBA Name profile to be refreshed. so as to ensure that the client end obtains the IP address from the legal DHCP server.2 Method Click the Enables / disables the Switch Configuration drop-down list to select the value. the system can filter information from an illegal DHCP server.11.3 GUI Reference of the HSWA Card 3. Version: A 3-119 . Access method Right-click the HSWA card in the object tree pane.1 Enabling DHCP Snooping Function Command function The DHCP snooping enabling command is used to enable the DHCP snooping function of the equipment. After this function is enabled.11. A trusted port can receive and forward DHCP Offer messages normally. a non-trusted port will discard the received DHCP Offer messages. Parameter Parameter Name Parameter Description Value Range / Requirement Property DHCP snooping — Compulsory function. the equipment snoops the DHCP messages. and extracts / records the IP address and MAC address information from the received DHCP Request or DHCP Ack messages. Configuring a DHCP Snooping Trusted Port Command function The DHCP snooping trusted port configuration command is used to set a certain uplink port as the trusted port. and select Config  DHCP  DHCP Snooping Switch in the shortcut menu. Then the DHCP Snooping Switch window will appear.11 Configuring DHCP 3. Via this operation. 3. 10 indicates port 20: SFP4. snooping function is enabled. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Selects a trusted uplink port as follows: 1 indicates port 19: XFP. or PPPoE+. Double-click to type the value corresponding to the uplink port. Option18. 3 indicates port 19: SFP2. 9 indicates port 20: SFP3.AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Right-click the HSWA card in the object tree pane.3 Managing Line Identifier Command function The AN5516-06 uses the line identifier management command to select one of the following modes to add its own access node identifier. Then the Line Identifier Management window will appear. 12 indicates port 20: SFP6.11. Optional. Access method Right-click the HSWA card in the object tree pane. Parameter 3-120 Version: A . and select Config  DHCP  Line Identifier Management in the shortcut menu. and subrack number in the DHCP Request message: DHCP Option82. cabinet number. this parameter is valid. 3. 2 indicates port 19: SFP1. 4 indicates port 19: SFP3. 11 indicates port 20: SFP5. and select Config  DHCP  DHCP Snooping Trusted Ports in the shortcut menu. The value range is 1 to 12. When the DHCP 5 indicates port 19: SFP4. 7 indicates port 20: SFP1. 8 indicates port 20: SFP2. Uplink Port No. Then the DHCP Snooping Trusted Ports window will appear. DHCP server. the AN5516-06 will add the Option18 option in Optional. DHCP server. and then report its Option18 Switch own address information — and the DHCP client end address information to the When the DHCP Click the Option18 mode is drop-down list used. the AN5516-06 will add its own address information in the received PPPoE+ Switch PPPoE PADI and PPPoE Optional. users must use DHCPv6 to obtain the IPv6 address. set this to select the parameter to value. users must use PPPoE to obtain the IP address. users must use DHCPv4 to obtain the IPv4 address. Enable. Enable. After this parameter is set to Enable. and then When the PPPoE+ report this information and — mode is used. set the DHCP client end this parameter to address information to the Enable. To enable this function. Version: A 3-121 . the AN5516-06 will add the Option82 option in Optional. as the DHCP relay agent. set this to select the parameter to value. and then report its Option82 Switch own address information — and the DHCP client end address information to the When the DHCP Click the Option82 mode is drop-down list used. Click the drop-down list to select the value. the received DHCP Request message.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property Configuration Method After this parameter is set to Enable. as the DHCP relay agent. After this parameter is set to Enable. DHCP server. To enable this function. PADR messages. the received DHCP Request message. To enable this function. so as to add the subscriber information and equipment information in the packets for the upper level BRAS equipment to manage conveniently. and this parameter is underlines. and type the PPPoE+ Switch are number of the all set to Disable. Option18 Double-click to The identifier of the the value can Switch. to use the user defined configuration.4 Configuring Line Identifier Format Command function The line identifier format configuration command is used to configure the system line identifier format and transparent options. the CNC standard. and Switch. and type the PPPoE+ Switch are number of the all set to Disable. this parameter is invalid. subrack. ANI-frame range is 0 to 127. numbers. Optional. Before configuration. When Option82 The value The number of the subrack. invalid. only consist of PPPoE+ Switch are identifier of the letters. When Option82 The value The number of the cabinet. this parameter is invalid. or the user defined configuration to set the line identifier format. 3. For the CTC standard and the CNC standard. cabinet. Option18 Double-click to Switch. users need to select the line identifier format. 3-122 Version: A . ANI-rack range is 0 to 31.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description AccessNodeIdentifier Value Range / Requirement Property Configuration Method The value Optional. users need to determine the line identifier message format. Switch. Switch. The system can use the CTC standard.11. Optional. and type the AN5516-06. AN5516-06. users can select them directly. Option18 Double-click to Switch. range: 1 to 50 When Option82 characters. digital all set to Disable. Format Type Uplink-port-type. IAD-IP. ONU-authorization-No. this Click the drop-down list to select the value. Customer Format. AccessNodeIdentifier.3 GUI Reference of the HSWA Card Access method Right-click the HSWA card in the object tree pane. IAD-MAC.. When ID Format Type Custom String The user defined fixed value of the line identifier. MDU-ONU-subslot. parameter is valid. Then the Circuit ID Format window will appear. ANI-rack. — is set to Customer Format. MDU-ONU-UNI-port. The value includes: Outer VLAN. OLT-management –VLAN-IP. Circuit ID Variable Service-card-type. ANI-PON-port. parameter is valid. Inner VLAN. — is set to Customer Format. and select Config  DHCP  Circuit ID Format in the shortcut menu. ANI-frame. ONU-type. Port -VPI/SVLAN. Optional. and Method Click the identifier The type of the identifier format. MDU-ONU-slot. Optional. The line identifier variable needed for the user defined configuration. Use CNC Format. this Double-click to type the string value. Parameter Parameter Name Parameter Description Value Range / Requirement Property Its value includes Use CTC Format. and Access-type. Version: A 3-123 . ONU-user-port-type. ANI-slot. When ID ANI-ONU-ID(MAC). ID Format Type Configuration — Compulsory format button box to select the value. Port -VCI/CVLAN. or Access-type. this Click the drop-down list to select the value. The type of the variable matching the LAN ONU line LAN-PARAM identifier. 3-124 Version: A . Users can select ONU-ID.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Optional. When the TRUST-LAN LAN-ID value is the same as the identifier value of the line Select / clear the — Compulsory TRUST-LAN check box. parameter is valid. Users can select ONU-ID. Access-type. this message will be transmitted transparently. If the matching — Compulsory succeeds. Click the — Compulsory drop-down list to select the value. this message will be transmitted transparently. The identifier of the transparent LAN ONU message. AccessNodeIdentifier. AccessNodeIdentifier. identifier message. When the TRUST-IPDSLAM IPDSLAM-ID value is the same as the identifier value of the line Select / clear the — Compulsory TRUST-IPDSLAM check box. The identifier of the transparent IP DSLAM message. When ID Format Type Delimiter The delimiter between different line identifier variables. The type of the variable matching the IP DSLAM line IPDSLAM-PARAM identifier. message. identifier message. or Click the — Compulsory drop-down list to select the value. this message will be value matching the IP DSLAM line identifier transmitted transparently. — is set to Customer Format. Double-click to The variable value matching the type the variable IP DSLAM line identifier IPDSLAM-ID message. this message will be transmitted transparently. Version: A Method Double-click to The variable value matching the LAN-ID Configuration — Compulsory value matching the LAN ONU line identifier message. 3-125 . If the matching succeeds.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property type the variable LAN ONU line identifier message. 1 Selecting System Synchronization Reference Source Command function The system synchronization reference source selection command is used to configure the synchronization reference source of the AN5516-06. Then the Clock Mode window will appear. and select Config  Clock Mode in the shortcut menu. reference source of the Compulsory drop-down list to select the value.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. 3-126 Version: A . equipment. Access method Right-click the HSWA card in the object tree pane. Access method Right-click the HSWA card in the object tree pane. and select Config  System Clock Source in the shortcut menu.2 Configuring Clock Mode Command function The clock mode configuration command is used to configure the clock acquisition mode of a line interface card.12.12 Configuring Clock 3.12. acting as the The value range is 11 to synchronization 16. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the Click the TDM card or clock card Slot No. 3. Then the System Clock Source window will appear. The value includes Local and System. Slot No. provides the clock.3 GUI Reference of the HSWA Card Parameter Parameter Parameter Value Range / Name Description Requirement The slot number of The value range is 11 to the line interface card. Property Compulsory Configuration Method Click the drop-down list to select the value. Local: The oscillator Clock Mode inside the line interface card — Compulsory Click the drop-down list to select the value. 16. System: The system synchronization reference source provides the clock. The clock acquisition mode of the line interface card. Version: A 3-127 . Version: A . and select Config  PON Protection Group Config  PON Protection Group Config in the shortcut menu. Compulsory type the number of the PON port protection group. PON No. 64. After this command is executed. protection group. Its value is read via the The number of the port Click to enter the joining the PON port PON No.13. the system can perform the switching of the active/standby PON ports according to the status of a PON port. so as to ensure security of the downlink line. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Double-click to Group No.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. The number of the PON The value range is 1 to port protection group.13 Configuring PON Port Protection 3. Access method Right-click the HSWA card in the object tree pane. line interface card Slot No. group. protection group.1 Setting a PON Port Protection Group Command function The PON port protection group setting command is used to set the active/standby PON ports as a PON port protection group. configuration GUI. Then the PON Protection Group Config window will appear. The slot number of the Read-only. containing the PON port — joining the protection 3-128 configuration of PON — No. The PON ports joining — Compulsory and select the the same protection port joining the group must have the PON port same type. — use the Group No. Access method Right-click the HSWA card in the object tree pane. and select Config  PON Protection Group Config  PON Port Protection Group Mode in the shortcut menu. value configured in the PON Port Protection Click the drop-down list to select the value.2 Configuring PON Port Protection Group Mode Command function The PON port protection group mode configuration command is used to configure the protection mode of the PON port protection group.3 GUI Reference of the HSWA Card 3. Then the PON Port Protection Group Mode window will appear. In addition. this command can implement the auto-returning-to-active-link function after the service of the active port resumes. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Compulsory. Version: A 3-129 . The number of the PON port protection group. Group Config window. This parameter should Group No.13. auto return interval. Enable. splitters. 3-130 Type B. ONU optical Click the — Compulsory drop-down list to select the value. this parameter Double-click to type the auto return wait time. range is 0 to 3600. Type B: Provides redundancy protection for the OLT PON port and the optical fiber between the splitter and the OLT. is valid. Optional. with the unit being second. When this parameter is to Auto Resume Optional. When Item is set to Type B. modules. Its value includes Type B. Version: A . Type C: Provides 1+1 Item redundancy protection for OLT PON ports. Type C. Type D: Provides 1+1 redundancy protection for OLT PON ports. the protected service will return to the former working — link automatically after the set The value Resume Interval The auto return wait time of the protected service. and distribution optical fibers. and distribution optical fibers. splitters. and Auto Resume is set to Enable. optical fibers between the splitter and OLT. and Type D. Auto When Item is set to Click the drop-down list to select the value.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The protection mode of the PON port protection group. this parameter is valid. ONU PON ports. optical fibers between the splitter and OLT. 13. hand-in-hand PON port protection group. Read-only — protection group.3 GUI Reference of the HSWA Card 3. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Double-click to The number of the Group No. so as to protect the services on these ONUs. A hand-in-hand PON port protection group must have the same OLT type. Compulsory of the hand-in-hand PON port protection group. line interface card containing the local PON port joining the The value range is 11 to 16. Its value must not be OLT IP The IP address of the the same as the IP local OLT. the same line interface card type. Then the Hand-in-Hand PON Protection Group Configure window will appear. Version: A 3-131 . OLT. and the same ONU type.3 Configuring a Hand-in-Hand PON Port Protection Group Command function The hand-in-hand PON port protection group configuration command is used to configure ONUs spanning OLTs as a hand-in-hand PON port protection group. type the number The value range is 1 to 128. and select Config  PON Protection Group Config  Hand-in-Hand PON Protection Group Configure in the shortcut menu. Access method Right-click the HSWA card in the object tree pane. The slot number of the Local Slot No. address of the opposite Double-click to Compulsory type the IP address. The number of the Peer Port No. the line interface card. The slot number of the line interface card Peer Slot No. PON Port Protection Group Forced Switching Command function The PON port protection group forced switching command is used to perform switching of the active / standby PON ports in the PON port protection group forcibly. containing the opposite PON port joining the The value range is 11 to 16. 3. protection group. Peer IP of Hand-in-hand OLT Parameter Description Value Range / Requirement The number of the local The value range port joining the PON depends on the type of port protection group. The IP address of the opposite OLT.13. Double-click to Compulsory type the PON port number.4 The value range depends on the type of the line interface card. Double-click to Compulsory type the slot number. Double-click to — Compulsory type the IP address.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Local PON Port No. Property Configuration Method Select the PON Compulsory port number as required. 3-132 Version: A . and select Control Command  PON Protection Group Switch in the shortcut menu. Then the PON Protection Group Switch window will appear. Access method Right-click the HSWA card in the object tree pane. opposite port joining the PON port protection group. value configured in the of the PON port PON Protection protection group. Group Config window. and select Control Command  Pon Protect Group Rtt Value in the shortcut menu. 64. type the number port protection group. 64. Access method Right-click the HSWA card in the object tree pane.5 PON Port Protection Group Ranging Command function The PON Port protection group ranging command is used to measure the relative distance from the ONU to the OLT according to the round-trip delay of a PON port in the PON port protection group. Group No. Group No. This parameter should Double-click to The number of the PON The value range is 1 to use the Group No. This parameter should Double-click to The number of the PON The value range is 1 to use the Group No. Group Config window. Then the Pon Protect Group Rtt Value window will appear.3 GUI Reference of the HSWA Card Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Compulsory. value configured in the of the PON port PON Protection protection group. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Compulsory. Version: A 3-133 .13. 3. type the number port protection group. Stable Standby. and select Get Information  PON Protection Group Working Status in the shortcut menu. this parameter is displayed as Detecting. 3-134 Version: A . State Its value includes Stable Main. and Detecting. Detecting indicates abnormal operating status. Read-only The status of the PON port protection group.13. Access method Right-click the HSWA card in the object tree pane. Then the PON Protection Group Working Status window will appear. Read-only When the PON port is under detecting status. Slot No. Group State When the PON port is under stable status. Read-only Stable indicates normal operating status. PON Port No. The number of the port joining the PON port protection group.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. Read-only Read-only The status of a certain PON port in the PON port protection group. Parameter Parameter Name Group No. this parameter is displayed as Stable.6 Viewing PON Port Protection Group Operating Status Command function The viewing PON port protection group operating status command is used to view the current status of the PON port protection group. Its value includes Stable and Detecting. The slot number of the line interface card containing the PON port joining the protection group. Parameter Description Property The number of the PON port protection group. 14 Managing Uplink Function 3. The member ports can only be uplink ports. The main function of Trunking is to bind multiple physical ports to form one logical channel. users can increase the bandwidth of the entire network. and select Config  Uplink Function Manage  Port Trunking in the shortcut menu.14.1 Configuring Trunking Link Aggregation Command function Trunking involves the static aggregation group. Users cannot configure trunking and LACP modes at the same time. Access method Right-click the HSWA card in the object tree pane. the remaining links can still work. in addition. Compared with the LACP mode.3 GUI Reference of the HSWA Card 3. if one or multiple links among these physical links are interrupted due to network fault or other reasons. A trunking group can only have one master port. Trunk Group Master Port This parameter is read The master port of a certain trunking group. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Read-only. Then the Port Trunking window will appear. — if you select the Master Port check box — in the right pane of the window. Via this operation. Version: A 3-135 . Trunking needs manual setting of trunking member ports. the data are transmitted through multiple bound physical links so that the link redundancy can be implemented. with the — Read-only — format being “slot number: port type”. A trunking group can only Select / clear the All uplink ports. 3-136 Version: A .14. After receiving these information items. so that the two parties can achieve consistency on the port joining / leaving a certain dynamic aggregation group.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Read-only. for the master port. The system reads the available uplink ports of Port Name the equipment automatically. port number.2 Main Port check Select / clear the Compulsory Member Port check box. The master port of a Master Port certain trunking group. system MAC address. the opposite end compares them with the information items saved in other ports to select ports that can be aggregated. The LACP protocol exchanges information with the opposite end via the LACPDU. and operation key. This parameter is read — if you select the Member Port check — box in the right pane of the window. Compulsory box. When the LACP protocol on a certain port is enabled. A Member trunking group can have Port up to 11 member ports. Setting LACP Command function The LACP (Link Aggregation Control Protocol) is a protocol to implement the dynamic link aggregation function. this port will send the LACPDU to the opposite end for notifying the opposite end of its own system priority. 3. have one master port. Member The member port of a All uplink ports except Port certain trunking group. Trunk The member port of a Group certain trunking group. Enable. When the System Priority AN5516-06 is connected The value range is 0 to When Lacp dynamic with the uplink 65534.3 GUI Reference of the HSWA Card After the LACP function is enabled. Version: A 3-137 . and are connected with the same equipment set. users do not need to configure the aggregation member ports manually. The default Switch is set to equipment. The member ports can only be uplink ports. Then the LACP Config window will appear. select Config  LACP Config in the shortcut menu. the same duplex property. and the system can perform the dynamic configuration automatically. Parameter Parameter Name Lacp dynamic Switch Parameter Description Enables / disables the LACP function. AN5516-06. the system value is 32768. Access method Right-click the HSWA card in the object tree pane. Various ports can be aggregated dynamically only under the following conditions: They have the same rate. Users cannot configure trunking and RSTP functions when configuring the LACP function. the equipment can support up to 11 ports. and the same basic configurations. Value Range / Requirement Property Configuration Method Click the — Compulsory drop-down list to select the value. will compare this parameter. and click the LACP Config tab in the window that appears. Because one port must Uplink Port be added to the No. The number of the uplink port joining the LACP calculation. management VLAN and — Read-only — cannot join the LACP aggregation group. The priority of the Optional. this parameter — is valid. Parameter Parameter Name Parameter Description Property The number of the dynamic aggregation Group No. Access method Right-click the HSWA card in the object tree pane. this parameter select the value. and click the Aggregation Config tab in the window that appears. Switch For an uplink port. is valid. Read-only. 3. set to Enable. if the uplink card is connected with the uplink equipment. users can perform the aggregation setting command to make the system automatically read the assignment status of the aggregation group. select Config  LACP Config in the shortcut menu. aggregation group only when this parameter is When Lacp dynamic Click the Switch is set to drop-down list to Enable. Then the Aggregation Config window will appear. group. Before performing the aggregation setting command. System id The MAC address of the equipment. uplink port. Read-only Reserve Byte — Read-only and reserved 3-138 Version: A .14. Its value is assigned by the Read-only system automatically. users need to enable the LACP function. It is the System Priority value configured in the LACP Config window.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Enables / disables the LACP function of an Optional. it can The default value is be set into a certain Enable.3 Aggregation Setting Command function After the LACP function is enabled. System Priority The priority of the AN5516-06. 3. Parameter Description Value Range / Requirement Property The number of the port supporting the Read-only. After the uplink card is connected with the uplink equipment. the system will compare these parameters of different uplink ports. Configuration Method — Double-click to Port Priority When this equipment is The value type the port interconnected other equipment sets.14. The comparison. select Config  LACP Config in the shortcut menu. window. The smaller its value is. users need to enable the LACP function.4 Read-only Setting LACP Port Parameters Command function The LACP port parameter setting command is used to set the LACP protocol parameters of each uplink port. that the default Compulsory It is value be used. default value is recommended the higher the port priority is. this parameter will be used for 65534.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Property The number of the port included in a uplink Port no certain dynamic aggregation group. — no value configured The system can automatically read all in the LACP Config ports supporting the LACP function. and the parameters of a high-priority uplink port will act as the group parameters of the group including this port. Then the LACP Port Config window will appear. Before performing the LACP port parameter setting command. Access method Right-click the HSWA card in the object tree pane. with the format being It is the Uplink Port “slot number: port number”. 32768. and click the LACP Port Config tab in the window that appears. range is 0 to priority. Version: A 3-139 . Parameter Parameter Name Uplink Port No. LACP function. AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property The operation key is a configuration Key Method Double-click to combination generated for port Operation Configuration type the aggregation according to the port The value configuration (rate. and Short Timer indicates Click the — Compulsory drop-down list to select the value. The key) by the LACP protocol. The number of the uplink port. Read-only 3-140 Version: A . Before performing the viewing LACP port information command. 3. Long Timer indicates timer that the port sends a packet every 30 seconds. default value is The transmission end and the 1. Access method Right-click the HSWA card in the object tree pane. Read-only Group No. Then the LACP Port Information window will appear.5 Viewing LACP Port Information Command function The viewing LACP port information command is used to view the aggregation status information of an uplink port.14. The number of the aggregation group. Parameter Parameter Name Parameter Description Property Port No. users need to enable the LACP function and complete configuration of parameters in the LACP Port Config window. duplex mode. operation key Compulsory value. that the port sends a packet every three seconds. and select Get Information  LACP Port Information in the shortcut menu. It is recommended that the default receiving end must have the same value be used. operation key. range is 0 to basic configuration. and management 65534. Its value includes Long Timer and Short Timer. Indicates whether the aggregation link is under the protocol-message-collecting Read-only status. Lacp protocol syn flag Lacp protocol collecting flag Lacp protocol distributing flag 3. Then the Port Mirror window will appear. so as to perform the real time network traffic analysis and fault diagnosis. and select Config  Uplink Function Manage  Port Mirror in the shortcut menu. 1 timeout flag indicates the Short Timer.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Property Read-only. and 0 indicates the Long Timer. It is the Operation Key value configured in the LACP Port Config window. Read-only. Port Priority The priority set for the uplink port. Access method Right-click the HSWA card in the object tree pane.6 Read-only. The sending protocol message timeout Lacp protocol status value set for the uplink port.14. It is the Port Priority value configured in the LACP Port Config window. It is the timer value configured in the LACP Port Config window. Version: A 3-141 . Indicates whether the aggregation link is under the protocol-message-transmitting Read-only status. Operation Key The operation key value set for the uplink port. Configuring Port Mirroring Command function The port mirroring configuration command is used to mirror the data on a certain uplink port to a designated uplink port. Indicates whether the aggregation link is under the Read-only synchronizing-with-opposite-end status. and also prunes a loop network into a loop-free tree network. The RSTP (Rapid Spanning Tree Protocol) is a layer 2 management protocol. Parameter Parameter Name RSTP Switch 3-142 Parameter Description Enables / disables the RSTP function. 3.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Property Configuration Method Compulsory Click the drop-down list to select the value.14. This helps to avoid proliferation and infinite loop of packets in the loop network. Mirrored Port It can be any one of the available uplink ports on the equipment other than the mirroring port. Compulsory Click the drop-down list to select the value. The data on this port are mirrored to the mirroring port. The data are mirrored to this uplink port. Then the RSTP Switch window will appear. and select Config  Uplink Function Manage  RSTP Switch in the shortcut menu. The RSTP features fast convergence in the event of network topology changes. It implements path redundancy and path optimization via certain algorithms. Version: A . Access method Right-click the HSWA card in the object tree pane.7 Enabling / Disabling RSTP Command function The RSTP enabling / disabling command is used to enable / disable the RSTP function of an uplink card. Mirroring Port It can be any one of the available uplink ports on the equipment. Property Configuration Method Compulsory Click the drop-down list to select the value. Click the drop-down Active/Standby: For the two ports Protect Mode forming a protection group. and each pair of uplink ports can form one protection group. traffics are only allowed to pass through the active port and prohibited from passing through the standby port. Access method Right-click the HSWA card in the object tree pane. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The protection mode of the uplink card. In active / standby mode. and Disable. In disabling mode. users must ensure that two uplink cards of the same type are present. Load Equalization: Traffics pass through list to select the The default value is Disable. for the two ports forming a protection group. active / standby protection. the protection mode of an uplink card is disabled. Its value includes Load Equalization. traffics are only allowed to pass through the active port and prohibited from passing through the standby port. In load balance mode. Version: A 3-143 .3 GUI Reference of the HSWA Card 3.8 Configuring Uplink Card Protection Command function The uplink card protection configuration command is used to set the protection mode of an uplink card: load balance protection. Active/Standby. Then the Uplink CardProtect window will appear. It is recommended that the default value be used. and select Config  Uplink Function Manage  UplinkCard Protect in the shortcut menu. the two ports forming a protection group at the same time. the ports of the uplink cards in slots 19 and 20 are protected correspondingly. When performing the configuration. Compulsory value. After the uplink card protection is set. traffics pass through the two ports forming a protection group at the same time. or disabling the protection function.14. the service is not interrupted. 3. and select Config  Uplink Function Manage  Dual Uplink Protection in the shortcut menu. when a certain up link in the protection group is faulty. It is recommended that the default value be used. Access method Right-click the HSWA card in the object tree pane.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Disable: The protection mode of an uplink card is disabled. Auto Resume indicates that the service Master Port will be switched to the pre-fault active work mode link after the active link resumes normal. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The processing mode after the active up link resumes normal. Non-auto Resume indicates that the Click the drop-down list to The default value is Non-auto Resume. Its value includes Auto Resume and Non-auto Resume. Compulsory select the value. The active and standby ports forming dual uplink protection must have the same properties.9 Configuring Dual Uplink Protection Command function The dual uplink protection configuration command is used to configure the dual route uplink protection for the equipment. service will be not switched to the pre-fault active link after the active link resumes normal. Then the Dual Uplink Protection window will appear. the uplink service will be switched to the other link. 3-144 Version: A . In this mode.14. and service protection is implemented. via this function. Property Read-only 3-145 . XFP means a 10Gb optical port.10 Querying Dual Uplink Protection Status Command function The querying dual uplink protection status command is used to query the group information of the dual uplink protection. The format is “slot number: port type”. can be generated. MasterPort Masterport refers to the uplink port in active mode.3 GUI Reference of the HSWA Card Parameter Name Group No. Its Up to six value is assigned by the system protection groups automatically. Click the All uplink ports. Version: A Parameter Description The number of the dual uplink protection group. and SFP means a Gb optical port. the same as those The format is “slot number: port type”. Access method Right-click the HSWA card in the object tree pane.14. Parameter Description Value Range / Requirement The number of the protection group. Compulsory drop-down list to select the value. Click the Compulsory drop-down list to select the value. Property Read-only Configuration Method — A protection group must have one active port (MasterPort) and one standby port (SlavePort). Parameter Parameter Name Group No. A protection group must have one active port (MasterPort) and one SlavePort standby port (SlavePort). 3. Other uplink ports SlavePort refers to the uplink port in with the properties standby mode. including the group member port status. and SFP means a Gb optical port. XFP means a 10Gb optical port. and select Get Information  Dual Uplink Protection Status in the shortcut menu. Then the Dual Uplink Protection Status window will appear. of the active port. Its value Type of packet includes: broadcast. 3-146 Version: A . When the packet suppression function is enabled. Read-only. This parameter is the value configured in the Dual Uplink Protection window. and select Config  Upport Packet Rate Control in the shortcut menu. The current standby (deactivated) port in the uplink protection group.11 Parameter Description Property The current active (activated) port in the uplink protection group. the multicast service will also be interrupted. multicast packets. Then the Upport Packet Rate Control window will appear. Read-only. This parameter is the value configured in the Dual Uplink Protection window. multicast packets. As soon as the multicast packets are suppressed. and unknown packets sent to the CPU port. so as to ensure normal working of the CPU. Access method Right-click the HSWA card in the object tree pane. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — The type of the packet suppression. the switch chip in the core switch card will suppress the broadcast packets. Packet Suppression on an Uplink Port Command function The uplink port packet suppression command is used to configure or query the function of suppressing broadcast packets.14. Parameter Description The number of the uplink port. and unknown packets. and unknown. multicast. Parameter Parameter Name Port No.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name ActivePort StandbyPort 3. multicast packets. and unknown packets on an uplink port. The uplink port packet suppression function is used to suppress the downlink broadcast packets. and select Get Information  UplinkPort LoopBack in the shortcut menu. Optional. The function is per second. 3-147 . 3. When the Sets the number of The value range is 1 to packet Speed packets that can pass 262142. Access method Right-click the HSWA card in the object tree pane. The parameters to be viewed include the transmitted frame. and the delay. this parameter is valid.14. Double-click to type the number of packets that can pass through the uplink port per second. Click the drop-down Compulsory list to select the value.12 Configuration Method Select or cancel the check box. Its value should match the selected Uplink Slot No. the received frame. enabled. The number of the uplink Uplink No.3 GUI Reference of the HSWA Card Parameter Value Range / Parameter Description Name Requirement Property Enables / disables the Enable/Disable packet suppression — Compulsory function of the uplink port. It is recommended that the default value be used. Viewing Uplink Port Loopback Command function The viewing uplink port loopback command is used to view the OAM loopback test function on an uplink port. Version: A Value Range / Requirement The value range is 19 to 20. Parameter Description The slot number of the uplink card containing the uplink port. port needing the loopback test. Property Configuration Method Click the drop-down Compulsory list to select the value. Parameter Parameter Name Uplink Slot No. Then the UplinkPort LoopBack window will appear. default value is 150. with the unit suppression (packet/second) through the uplink port being packet/s. Frames The number of received Received error frames in the uplink Corrupted port loopback test. The minimum delay from MinDelay transmitting a packet to receiving it in the uplink port loopback test. 3-148 Version: A . Frames The number of received Received correct frames in the uplink OK port loopback test.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Send Frame Parameter Description Value Range / Requirement Property Configuration Method The number of transmitted frames in the uplink port — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — loopback test. The maximum delay from MaxDelay transmitting a packet to receiving it in the uplink port loopback test. The average delay from Avg-Delay transmitting a packet to receiving it in the uplink port loopback test. the equipment can control and limit number of protocol packets sent from a user.15.15 System Security Management 3. When the anti-DOS attack function is enabled.1 Enabling Anti-DOS Attack Function Command function The enabling anti-DOS attack command is used to enable the anti-DOS attack function of the equipment. and select Config  Anti-DOS-Attack Switch in the shortcut menu. Access method Right-click the HSWA card in the object tree pane. Property Configuration Method Compulsory Click the drop-down list to select the value. Parameter Parameter Name Enable/Disable Version: A Parameter Description Enables / disables the anti-DOS attack function. Then the Anti-DOS-Attack Switch window will appear. 3-149 .3 GUI Reference of the HSWA Card 3. so as to increase its anti-attack performance and guarantee the security. AN5516-06 Optical Line Terminal Equipment GUI Reference 3. MAC spoofing is described as follows: Malicious users attack the services of the normal users by forging their MAC addresses and sending packets to the equipment. the spoofing can cause network paralysis and system’s crash if a large number of forged packets are transmitted to the system.16 User Security Management 3. and select Config  Anti-MAC-Spoofing Switch in the shortcut menu. Access method Right-click the HSWA card in the object tree pane.16.1 Enabling Anti MAC Spoofing Function Command function The enabling anti MAC spoofing command is used to prevent malicious users from attacking the network by forging MAC addresses. 3-150 Version: A . Or even worse. Parameter Parameter Name Parameter Description Property Configuration Method Compulsory Click the drop-down list to select the value. Then the Anti-MAC-Spoofing Switch window will appear. Enables / disables the Enable/Disable anti MAC spoofing function. and select Config  Aging Time (s) in the shortcut menu. Then the Aging Time (s) window will appear. Up to 65535 MAC addresses can be displayed.1 Configuring Aging Time Command function The aging time configuration command is used to configure or query the aging time of the MAC address table of the system.3 GUI Reference of the HSWA Card 3. with the unit being (s) address in the FDB second. Access method Right-click the HSWA card in the object tree pane. this address will be deleted from the dynamic MAC address table. The network management system starts timing after a certain MAC address is added to the address table. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Double-click to The interval to modify The value range is 0 to Aging Time and maintain the MAC 300. Compulsory It is recommended that the default value be used.2 Viewing OLT MAC Address Table Command function The viewing OLT MAC address table command is used to view the MAC address learned from the card or uplink port and the VLAN containing this MAC address.17 Aging MAC Addresses 3. 3.17.17. type the aging time. The default table. Version: A 3-151 . value is 80. If no frames whose source address is the given MAC address are received at the ports before aging time expires. the value of this parameter is blank. Configuring ONU MAC Address Aging Time Command function The ONU address aging time configuration command is used to configure or query the aging time of the MAC address table of a certain ONU. Then the MAC Aging Time window will appear. Property Configuration Method Read-only — Read-only — Read-only — Read-only — The port number of the uplink card. Access method Right-click the HSWA card in the object tree pane.AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Right-click the HSWA card in the object tree pane. this address will be deleted from the dynamic MAC address table. certain slot number belongs to a service interface card. Parameter Parameter Name Slot No. Then the OLT Mac Addr Table window will appear. and select Config  ONU MAC Aging Time in the shortcut menu. MAC Address VLAN ID 3.17. Parameter Description The slot number of the service interface card or uplink card. and select Get Information  OLT Mac Addr Table in the shortcut menu. If no frames whose source address is the given MAC address are received at the ports before aging time expires. The ONU starts timing after a certain MAC address is added to the address table. If a Port No. 3-152 Version: A .3 The MAC address learned from the card or uplink port. The VLAN containing the MAC address learned from the card or uplink port. Version: A 3-153 . The default table.3 GUI Reference of the HSWA Card Parameter Parameter Name Parameter Description Value Range / Requirement Property The slot number of the Slot No. The number that the drop-down list to select the value. Double-click to The interval to modify The value range is 0 to Aging Time and maintain the MAC 300. Compulsory It is recommended that the default value be used. Compulsory The value range is 1 to No. The value range is 1 to 64. OLT assigns for the ONU. PON Port Configuration Double-click to Compulsory type the ONU number. ONU. The PON port number of the service interface Method Click the ONU. card connected with the 8. service interface card The value range is 11 to connected with the 16. with the unit being (s) address in the FDB second. Double-click to Compulsory ONU No. value is 80. type the PON port number. type the aging time. users can replace the faulty ONU with an ONU of the same type. ONU. The new ONU will use the authorization type the PON port number.1 Replacing an ONU Command function When a certain ONU is faulty. be replaced. Compulsory type the MAC address of the replaced ONU. Then the ONU Replace window will appear. service interface card The value range is 11 to connected with the ONU 16. card connected with the 8. 3-154 Version: A . Double-click to Compulsory The authorization Double-click to number of the ONU to ONU No.18. Compulsory authorization number of the ONU to be number of the replaced replaced.18 Replacing an ONU 3. and select Config  ONU Replace in the shortcut menu. The PON port number of The value range is 1 to Method Click the to be replaced. drop-down list to select the value. the service interface Configuration type the The value range is 1 to 64. MAC address. ONU to be replaced. Parameter Parameter Name Parameter Description Value Range / Requirement Property The slot number of the Slot No. Double-click to OldPhyicsID The MAC address of the It should be a legal replaced ONU. Compulsory PON Port No.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. The ONU replacement command is used to enable the new ONU to take over all services on the old ONU. Access method Right-click the HSWA card in the object tree pane. with the unit Time (s) to it being authorized being second. the MAC address of this ONU will be written into the unauthorized MAC address table. Compulsory It is recommended that the default value be used. 3. type the aging time. Version: A 3-155 . Then the Aging time of ONU Replace window will appear. and select Config  Aging time of ONU Replace in the shortcut menu. during the set aging interval.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Double-click to NewPhyicsID The MAC address of the It should be a legal new ONU. Access method Right-click the HSWA card in the object tree pane. MAC address.18.2 Configuring ONU Replacement Aging Interval Command function After a certain ONU is deauthorized. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Double-click to The interval from an The value range is 300 to Aging Out ONU being deauthorized 2147483647. Users can perform the ONU replacement aging interval configuration command to set the ONU replacement aging interval. value is 600. The default automatically again. this ONU cannot be authorized automatically. Compulsory type the MAC address of the new ONU. multicast packets. and unknown. and select Config  ONU Bridge Manage  Packets Rate Control Profile in the shortcut menu.1 Configuring a Packet Suppression Profile Command function The packet suppression profile configuration command is used to configure or query the function of suppressing uplink broadcast packets. Access method Right-click the HSWA card in the object tree pane. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The value range: 1 to 20 Profile Name The name of the packet suppression profile.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. and a profile name can only consist of Compulsory type the profile name. and underlines. Then the Packets Rate Control Profile window will appear. 3-156 — Compulsory drop-down list to select the value. The type of the packet Type of Packet suppression. and unknown packets on an ONU port. Double-click to characters. digital numbers. — Read-only — multicast.19 ONU Bridge Management 3. Version: A . Its value includes: broadcast. letters.19. Click the Enables / disables the Enable/Disable packet suppression function of the ONU port. this parameter is valid.19. Version: A 3-157 .  Weighted priority is a weighted round robin queue scheduling mechanism.  Mixed priority includes strict priority and weighted priority. In this mode. Configuring an Ethernet Switch Queue Scheduling Algorithm Profile Command function The Ethernet switch queue scheduling algorithm profile configuration command is used to configure the priority mode of data forwarding of the switch chip in the ONU.2 Configuration Method Double-click to type the number of packets that can pass through the ONU port per second. and performs scheduling of the uplink and downlink services according to the priority algorithm. Then the Queue Schedule Profile window will appear. It is recommended that the default value be used. low priority services are not blocked completely. The function is second. and are processed by a certain proportion at the same time. 3. The switch chip in the ONU arranges the uplink and downlink services in different priority queues according to the flow features. and select Config  ONU Bridge Manage  Queue Schedule Profile in the shortcut menu. enabled. When the Speed Sets the number of The value range is 1 to packet packets that can pass 262142.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property Optional. default value is 150.  Strict priority ensures that high priority services are always processed prior to low priority services. with the unit suppression through the ONU port per being packet/s. but when the system processes high priority services. the system first processes high priority services. Access method Right-click the HSWA card in the object tree pane. Click the Compulsory drop-down list to select the value. Click the drop-down list to select the value. and a profile Profile Ethernet switch queue name can only consist Name scheduling algorithm of letters. An EPON FTTB ONU port only supports four priority queues. underlines. Mode Its value includes: Strict Priority. and Double-click to Compulsory type the profile name. The priority mode of data forwarding of the switch chip in the ONU. Weight The default value is Weight Priority. this parameter is invalid. According to the configured mapping relationships and priority Queue Priority Optional. Priority 7 means the queue with the highest priority. processing of corresponding QoS level.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The value range: 1 to 20 The name of the characters. digital profile. Priority. of a message. and priority 0 means the queue with the lowest priority. 3-158 Version: A . and a port of another ONU type supports eight priority queues. numbers. and Mixed Priority. the system makes each message enter the corresponding queue for — When Mode is set to Strict Priority. value. Version: A 3-159 . — When Mode is set to Strict Priority. Priority. the more bandwidth it occupies for The value range is 1 to 55. Schedule Its value includes Strict Method Priority and Weight Optional. The higher Weight the weight value of a service is. Click the drop-down list to select the value. processing. this parameter is invalid. The service processing Compulsory. this parameter is valid. When Queue Double-click to Schedule Method is type the weight set to Weight Priority.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The queue scheduling algorithm corresponds to Queue the priority mode. bandwidth assignment proportion. . and users can trace and analyze these packets. L4 Src Port No. be sent to the network Compulsory type the L4 source port number of the packet. 3-160 Version: A . and select Config  Signal Trace in the shortcut menu. The feature parameters include IP.1 Enabling / Disabling Signaling Tracing Function Command function The enabling / disabling signaling tracing function is used to enable or disable the signaling tracing function and define the features of the packets to be traced. The packet whose destination IP Configuration type the — Compulsory destination IP address of the be sent to the network packet.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. Then the Signal Trace window will appear.20 Configuring Signaling Tracing 3. Parameter Parameter Name Parameter Description Value Range / Requirement Property The destination IP address of the IP address is the value set here will Method Double-click to packet. When the signaling tracing function is enabled.. the equipment will send the packets with the set features to the network management server. L4 Src The packet whose source port The value range is 1 Port No.20. number is the value set here will to 65534. management server. Access method Right-click the HSWA card in the object tree pane. management server. and L4 Dst Port No. The L4 source port number of the Double-click to packet. Version: A destination port number of the be sent to the network trace function.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property The L4 destination port number of L4 Dst The packet whose destination port The value range is 1 Port No. number is the value set here will to 65534. 3-161 . type the L4 Compulsory packet. Method Double-click to the packet. Enables / disables the signaling Status Its value includes Enable and Disable. Enable Configuration Click the — Compulsory drop-down list to select the value. management server. smart grid server connected with the equipment. Value Range / Requirement Property Configuration Method Double-click to The maximum length is 20 characters. type the port The value range is 0 to 65535. Click the drop-down list to select IPv4. and Connect IP double-click to The IP address of the smart grid server connected with the — Compulsory type the IP address of the equipment. 3-162 Version: A . Compulsory number of the smart grid server connected with the equipment.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. Access method Right-click the HSWA card in the object tree pane.21 Configuring a Smart Grid Server Command function The smart grid server configuration command is used to configure the related parameters of the smart grid server connected with the equipment. and select Config  Smart Grid Server Config in the shortcut menu. Compulsory type the name of the smart grid server. Double-click to Connect Port The port number of the smart grid server connected with the equipment. Parameter Parameter Name Smart Grid Server Name Parameter Description The name of the smart grid server connected with the equipment. Then the Smart Grid Server Config window will appear. and the parameters include the management VLAN. etc.22 Configuring Network Management Parameters 3. local VLAN on the same uplink port. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The maximum value length VLAN Name The management VLAN name is 20 characters. Version: A 3-163 . Note: When managing the equipment in in-band mode. digital numbers.3 GUI Reference of the HSWA Card 3. Access method Right-click the HSWA card in the object tree pane. and a configured in the CLI network VLAN name can consist of management system. Then the Management VLAN window will appear. and its value cannot VLAN ID configured in the CLI be the same as that of the network management system. and select Config  Management VLAN in the shortcut menu. letters. users need to configure the management VLAN first. The value range is 1 to VLAN ID The uplink port management 4085.22. and Read-only — Read-only — underlines. the IP address.1 Configuring a Management VLAN Command function The management VLAN configuration command is used to view or modify the related configuration parameters of the equipment uplink port. CLI network management system or modify it in the ANM2000. Users can set this parameter in the Click the — Optional drop-down list to select the value. The MAC address corresponding to the in-band network Mac management port and configured — Read-only — — Read-only — — Read-only — in the CLI network management system. 3-164 Version: A . CLI network management system or modify it in the ANM2000. this parameter cannot be set to UNTAG.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The IP address of the in-band network management port of the IP equipment. CLI network management system or modify it in the ANM2000. Tag If the property of a certain service on the local VLAN is set to UNTAG. Users can set this parameter in the Double-click to — Optional type the gateway value. The gateway of the in-band network management port of the Gateway equipment. The management VLAN tagging property configured in the CLI network management system. Users can set this parameter in the Double-click to — Optional type the IP address. The uplink port number Portlist corresponding to the management VLAN and configured in the CLI network management system. The mask of the in-band network management port of the Mask equipment. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The IP address of the network management server. The number of the TRAP-receiving port Udp Port of the network management system. Double-click to The community parameter in the TRAP Community message. Note: Users can also configure the IP address of the network management server in the CLI network management system. and select Config  SNMP TRAP Receiver IP Address in the shortcut menu. Version: A — Compulsory type the community parameter. 3-165 . IP Address Up to four IP addresses can be configured.3 GUI Reference of the HSWA Card 3. the equipment will send the TRAP message to the network management server that is matched with the set receiving address.22. Then the SNMP TRAP Receiver IP Address window will appear. address in the CLI network management system. After this command is executed. Access method Right-click the HSWA card in the object tree pane. Users can configure the IP Double-click to — Compulsory type the IP address. The default value is public. — Read-only — The standard port number is 162.2 Configuring a SNMP TRAP Receiving Address Command function The SNMP TRAP receiving address configuration command is used to set or modify the receiving address of the SNMP TRAP. and select Config  Static Routing in the shortcut menu. Parameter Parameter Name Slot No.22.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Value Range / Parameter Description Requirement The protocol version number of SNMP. Method — Double-click to type The IP address of the destination Route Configuration the IP address of the — Compulsory destination network or the network management server. v2c. Value Range / Requirement — Property Read-only network or the network management Destination server. gateway. and mask. SNMP Its value includes SNMP v1 and SNMP Version v2c. Subnet 3-166 The mask of the destination network IP address. SNMP v2c be used. Then the Static Routing window will appear. — Compulsory Click the drop-down list to select the value. The parameters to be configured include destination network IP address. Version: A . Double-click to type Gateway The gateway of the destination network IP address. — Compulsory the gateway of the destination network IP address. Access method Right-click the HSWA card in the object tree pane. Parameter Description The slot number of the HSWA card. 3.3 Configuration Property Configuring a Static Route Command function The static route configuration command is used to configure the parameters of the static route from the equipment to the destination network. Commonly it is recommended that Method The default value is SNMP Click the Compulsory drop-down list to select the value. Parameter Parameter Name Parameter Description Property The IP address of access control.255.22. Click the drop-down list to select the value. Enables or disables the network management system access control rule. Via this command. Enable/Disable When this parameter is set to Enable. the access control rule is valid. The default value is 255. If the system allows a certain IP address to Mask access the equipment.255. Access method Right-click the HSWA card in the object tree pane. the mask configuration Compulsory should be 255. Then the Control User window will appear. the access control rule is invalid. When this Compulsory Click the drop-down list to select the value. only the network management server matching the set IP address can access the equipment so that the equipment security can be increased. and select Config  Control User in the shortcut menu. Configuration Method Double-click to type the IP address of access control. users can designate the IP address or IP address section of the network management server. IP Commonly set this parameter to the IP Compulsory address of the network management server.255.3 GUI Reference of the HSWA Card 3. After this command is executed.255.4 Configuring Access Control of Network Management System Command function The network management system access control command is used to set the access control rule for the network management server to access the equipment. The IP address mask of access control.255. parameter is set to Disable. Version: A 3-167 .255. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Double-click to type the user Operation The user name to log in the CLI The maximum value UserName network management system.22.5 Configuring a CLI Account Command function The CLI account configuration command is used to set the user name. and user level to log in the CLI network management system. Its value includes Admin and User.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. Click the Compulsory drop-down list to select the value. length is 32 characters. Compulsory to log in the CLI network management system. Double-click to type the password Operation The password to log in the CLI The maximum value Passwd network management system. Compulsory name to log in the CLI network management system. Then the Consol User window will appear. Version: A . and select Config  Consol User in the shortcut menu. password. User Level 3-168 The level of the CLI user. Access method Right-click the HSWA card in the object tree pane. length is 32 characters. 23. 3-169 . Compulsory equipment The default value is temperature 65. alarm threshold. Version: A Value Range / Requirement Property Configuration Method The value range is 35 Double-click to to 85.3 GUI Reference of the HSWA Card 3.1 Configuring Temperature Threshold Command function The temperature threshold configuration command is used to set the system temperature alarm threshold. Parameter Parameter Name Parameter Description The equipment temperature alarm threshold. Access method Right-click the HSWA card in the object tree pane. with the unit type the being ℃. Then the Temp Threshold window will appear.23 Alarm and Performance Data Management 3. an alarm will be reported. the corresponding alarm prompt will be displayed in the Alarm Report pane at the bottom part of the ANM2000 GUI. If the system temperature is higher than the threshold value. TempThreshold When the equipment temperature is higher than the set threshold value. and select Config  Alarm Manage  Temp Threshold in the shortcut menu. 00. Access method Right-click the HSWA card in the object tree pane. the ANM2000 GUI. The default value is Double-click to Compulsory type the parameter value. the being ℃. bias current and optical Tx / Rx power. with the unit being ℃. voltage. Then the Optmodule AlarmThreshold window will appear. 3-170 Version: A . Double-click to Compulsory type the parameter value.2 Configuring Optical Module Alarm Thresholds Command function The optical module alarm thresholds configuration command is used to set the alarm thresholds of an OLT optical module. corresponding alarm The default value is prompt will be displayed in 100.AN5516-06 Optical Line Terminal Equipment GUI Reference 3.23. -40.00 to 100. the corresponding alarm prompt will be displayed in The value range is -40. the ANM2000 GUI. and select Config  Alarm Manage  Optmodule AlarmThreshold in the shortcut menu.00 to 100. When the equipment detects that the actual Minimum Warning Temperature Threshold (℃) temperature of an OLT optical module is lower than the set threshold. The related parameters include temperature. If the equipment detects that the value of a certain previous parameter exceeds its range.00. the corresponding alarm prompt will be displayed in the Alarm Report pane at the bottom part of the ANM2000 GUI. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method When the equipment detects that the actual The value range is temperature of an OLT -40. MaximumTemperature optical module is higher with the unit Alarm Threshold (℃) than the set threshold. Compulsory type the parameter value. with the unit being mA. the ANM2000 GUI. the ANM2000 GUI. The default value is 3.0. the corresponding alarm prompt will be displayed in The value range is Double-click to 0.0 to 100. with the unit being V. the ANM2000 GUI. The default value is 100.00 to 3. 0.60.60.0. Compulsory type the parameter value. the corresponding alarm prompt will be displayed in The value range is Double-click to 0. the corresponding alarm prompt will be displayed in The value range is Double-click to 0. When the equipment detects that the actual Minimum Warning Voltage Alarm Threshold (V) voltage of an OLT optical module is lower than the set threshold. Compulsory type the parameter value.00 to 3. Version: A 3-171 . with the unit being V. When the equipment detects that the actual Minimum Warning Bias Current Alarm Threshold (mA) current of an OLT optical module is lower than the set threshold. The default value is Compulsory type the parameter value.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Property Configuration Method When the equipment detects that the actual voltage of an OLT optical Maximum Voltage module is higher than the Alarm Threshold (V) set threshold.60.0. The default value is 3.00. the corresponding alarm prompt will be displayed in The value range is Double-click to 0. with the unit being mA. When the equipment detects that the actual Maximum Bias Current Alarm Threshold (mA) current of an OLT optical module is higher than the set threshold.0. the ANM2000 GUI.0 to 100. than the set threshold. with optical module is lower the unit being dBm.00. The default value is 8. When the equipment detects that the actual optical Rx power of an The value range is Maximum RX Power OLT optical module is -32. Compulsory type the parameter value.00 to 10. the ANM2000 GUI.00 to -1. the corresponding alarm prompt will be displayed in The value range is Double-click to -4.00. the The default value is corresponding alarm 0.00 to 10.00.00. the The default value is corresponding alarm -32. Double-click to Compulsory type the parameter value. with the unit being dBm.00. the The default value is corresponding alarm -5. Double-click to Compulsory type the parameter value.00. prompt will be displayed in the ANM2000 GUI.00 to -1. (Dbm) threshold.00. When the equipment Minimum Warning TX Power threshold (Dbm) detects that the actual The value range is optical Tx power of an OLT -4. (Dbm) threshold. prompt will be displayed in the ANM2000 GUI. with Power threshold lower than the set the unit being dBm. Double-click to Compulsory type the parameter value.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method When the equipment detects that the actual Maximum TX Power Alarm Threshold (Dbm) optical Tx power of an OLT optical module is higher than the set threshold. When the equipment detects that the actual optical Rx power of an The value range is Minimum Warning RX OLT optical module is -32.00. 3-172 Version: A . prompt will be displayed in the ANM2000 GUI. with Alarm Threshold higher than the set the unit being dBm. Property Configuration Method Click the Compulsory drop-down list to select the value.3 GUI Reference of the HSWA Card 3. parameter value. the corresponding alarm prompt will be displayed in the Alarm Report pane at the bottom part of the ANM2000 GUI. the ANM2000 GUI. Access method Right-click the HSWA card in the object tree pane. and select Config  Alarm Manage  CPU/Memory Usage Threshold in the shortcut menu. Version: A 3-173 .00.23. the corresponding The value range is 0.01 Double-click to alarm prompt will be displayed in to 100. Parameter Parameter Name Slot No.00.01 will be displayed in the to 100. 16. set threshold. Double-click to ANM2000 GUI. Compulsory type the indicates that the CPU is too busy. This alarm The default value is 90. indicates that the memory utilization ratio is too high. the corresponding alarm prompt The value range is 0.3 Configuring CPU / Memory Utilization Ratio Threshold of a Card Command function The card CPU / memory utilization ratio threshold configuration command is used to set or modify the CPU / memory utilization ratio threshold of a certain card. Parameter Description Value Range / Requirement The slot number of the object The value range is 11 to card. This alarm The default value is 90. When the actual CPU utilization CPU Usage Threshold (%) is higher than the set threshold. Then the CPU/Memory Threshold window will appear. When the actual memory Memory Usage Threshold (%) utilization ratio is higher than the Compulsory type the parameter value. When the actual CPU / memory utilization ratio of this card is higher than the threshold value. 3-174 Version: A . indicates that the memory utilization ratio is too high. the corresponding alarm prompt will be displayed in the ANM2000 GUI.00. When the actual memory Memory Usage Threshold (%) utilization ratio is higher than the set threshold. Double-click to Compulsory type the parameter value. Then the ONU CPU/Memory Usage Threshold window will appear.23. This alarm The value range is 0. indicates that the CPU is too busy.4 Configuring CPU / Memory Utilization Ratio Threshold of ONUs Command function The ONU CPU / memory utilization ratio threshold configuration command is used to set or modify the CPU / memory utilization ratio threshold of all ONUs under the OLT. Double-click to Compulsory type the parameter value. Access method Right-click the HSWA card in the object tree pane.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method When the actual CPU utilization CPU Usage Threshold (%) is higher than the set threshold. the corresponding alarm prompt will be displayed in the Alarm Report pane at the bottom part of the ANM2000 GUI.00. and select Config  Alarm Manage  ONU CPU/Memory Usage Threshold in the shortcut menu. the corresponding alarm prompt will be displayed in the ANM2000 GUI.01 to 100. When the actual ONU CPU / memory utilization ratio is higher than the threshold value. This alarm The value range is 0.01 to 100. users need to enable the performance monitoring function via the ANM2000. Before querying the CPU / memory utilization ratio of the HSWA card.3 GUI Reference of the HSWA Card 3. users can query the CPU / memory utilization ratio of the HSWA card.5 Enabling / Disabling Performance Classification Command function The performance classification enabling / disabling command is used to enable / disable the performance monitoring function of the HSWA card. Version: A Configuration Parameter Description Method Click the Compulsory drop-down list to select the value. Read-only — Read-only — The performance classification category that can be queried of the HSWA card. Switch When it is set to Enable. Enables / disables the performance monitoring function. Then the Perf Sort Line Switch window will appear. Parameter Parameter Name Slot No.23. Access method Right-click the HSWA card in the object tree pane. Perf Code Property The slot number of the HSWA card. when it is set to Disable. users cannot query the CPU / memory utilization ratio of the HSWA card. 3-175 . and select Config  Perf Sort Line Switch in the shortcut menu. environment monitoring parameters. environment monitoring parameters. and CPU / memory utilization ratio. Slot No. Then the Perf Sort Line Switch Status window will appear. Its value corresponds to four performance classification Perf Code categories: performance statistics data. The slot number of the object to be queried. and CPU / memory utilization ratio.6 Viewing Enabling Status of Performance Classification Command function The viewing performance classification enabling status command is used to view the enabling status of performance classification function.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. Access method Right-click the HSWA card in the object tree pane. optical module parameters. Read-only — 3-176 Version: A . Read-only — ONU No. Via this command.23. users can view the enabling status of the following four performance classification categories: performance statistics data. The ONU authorization number of the object to be queried. Read-only — PON No. The PON port number of the object to be queried. optical module Read-only — parameters. and select Get Information  Perf Sort Line Switch Status in the shortcut menu. Parameter Parameter Name Parameter Description Property Configuration Method The performance classification category that can be queried. The current system uses the — Read-only — Compulsory — SNMP timing mode. and click the Time Method tab in the window that appears.1 Configuring Timing Mode Command function The time calibration mode configuration command is used to set the following parameters: system timing mode. clock time zone.3 GUI Reference of the HSWA Card 3. Access method Right-click the HSWA card in the object tree pane. and minute-level deviation of the system clock. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The timing mode of the Time Method system.24. select Config  Time Management  Time Management in the shortcut menu.24 Time Management 3. Version: A 3-177 . The time zone of the system location. location. Timezonehour Users should select a corresponding time zone according to current system Click the drop-down list to select the value. Then the Time Method window will appear. so as to ensure accuracy of the system time. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The time interval for the system EMS Syn to synchronize itself with the Interval network management server (S) automatically. users can use this system location. the system will synchronize itself with the network management server periodically. Double-click to Compulsory type the parameter value. 3. After the SNMP time system is configured.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Description Name Value Range / Property Requirement Configuration Method The minute-level deviation of the time zone of the system Double-click to location. The recommended value is 600. Then the SNMP System TimeConfig window will appear.2 Configuring SNMP Time System Command function The SNMP time system configuration command is used to set the timing reference network management server and timing interval of the system. The value range is 300 to 86400. minute-level deviation of the time zone of the Zone Hour.24. 3-178 Version: A . Access method Right-click the HSWA card in the object tree pane. When the time zone of the Timezonemin system location has a difference with System Time type the The value range is 0 to Compulsory 59. parameter to adjust the time zone time. and click the SNMP System TimeConfig tab in the window that appears. select Config  Time Management  Time Management in the shortcut menu. 24. 3. Querying Equipment Time Command function The equipment time query command is used to query the time parameters of the equipment. Parameters Parameter Name running time 3. Version: A 3-179 . Then the running time window will appear.3 Querying Equipment Uptime Command function The equipment uptime query command is used to query the uptime of the equipment. and the IP address of the timing reference network management server. system time zone.24. Access method Right-click the HSWA card in the object tree pane. The system will synchronize Double-click to Compulsory — type the parameter value. including current time. itself with this network management server periodically. timing mode. and click the running time tab in the window that appears.4 Parameter Description Property Configuration Method Read-only — The uptime from the equipment starting working to the current time point.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Property Requirement Configuration Method The IP address of the timing AEMS Server Addr reference network management server. select Config  Time Manage  RunningTime in the shortcut menu. Parameters Parameter Name time Parameter Description Property Configuration Method The current time of the system. Timezonehour Users should select a corresponding time zone according to current system location. Then the REAL time window will appear. The IP address of the timing reference network Server Addr management server. TimeMethod The current system uses the SNMP timing mode. and click the REAL time tab in the window that appears. Time zone The minute-level deviation of the time zone of min the system location. Read-only — Read-only — Read-only — Read-only — Read-only — The timing mode of the system. 3-180 Version: A . The time zone of the system location. The system will synchronize itself with this network management server periodically. select Config  Time Manage  RunningTime in the shortcut menu.AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Right-click the HSWA card in the object tree pane. and select Control Command  Save Config to Flash in the shortcut menu. Note: After configuring the equipment or modifying the configuration of the equipment. users need to execute the Save Config to Flash command. Access method Right-click the HSWA card in the object tree pane. Then the Save Config to Flash window will appear. Command Succeed will be displayed in the command result pane of the window. and then the configuration can be displayed in the ANM2000 GUI via the Read from Device command. otherwise after the equipment is restarted.25 Upgrade and Backup Operation 3. After completing all configuration operations in the ANM2000. Version: A 3-181 . Click the OK button to execute the command. users must execute the Save Config to Flash command.25. the unsaved configuration will be lost. the Flash of the HSWA card will retrieve the configuration data saved in it to the RAM of the equipment. After the configuration data are saved successfully. After the equipment is restarted.3 GUI Reference of the HSWA Card 3.1 Saving Configuration in Flash Command function The saving configuration in Flash command is used to save the current configuration in the Flash of the HSWA card. Via this command. 3-182 The value format is 001 01:01. the system will save the configuration automatically according to the set period. the Save system will not save the Frequency configuration automatically. Click the — Compulsory drop-down list to select the value. users can select one of the following configuration rules: not saving automatically or saving automatically at specific interval given by user. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The frequency of the system saving the configuration parameters into the Flash of the HSWA card. HSWA card.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. Access method Right-click the HSWA card in the object tree pane.2 Setting Saving Configuration Rule Command function The setting saving configuration rule command is used to set the rule to save the configuration parameters (in the ANM2000) in the Flash of the HSWA card. The period of the system saving Cycle (s) the configuration parameters in the Flash of the HSWA card. Double-click to When Save type the period of Frequency is set the system saving to the configuration Once-per-Period. Version: A .25. parameters in the this parameter is Flash of the valid. When it is set to Not-Auto. Then the Save Config Set window will appear. and the value range is 000 00:05 to 365 23:59. and select Config  Save Config Set in the shortcut menu. When it is set to Once-per-Period. Optional. AC16/VOIP/PU. TDM. Its value includes HSW. the TDM card software.25. including the core switch card software. users can right-click the HSWA card and execute the Get Information → Card Version command to view the card software status. users can obtain the upgrade file from the appointed server and upgrade the card software. Click the drop-down list to select the value. Type the parameter value in the text box directly. Via this command. and select Control Command  Upgrade Software in the shortcut menu. The password to log in the FTP server. the voice interface card software. FtpServerIp Slot No UserName Password Version: A The IP address of the FTP server. 3-183 . PONINF. The user name to log in the FTP server. Access method Right-click the HSWA card in the object tree pane. Note: After upgrading the software of a certain card successfully. The type of the file to be FileType downloaded. and the OLT firmware.3 GUI Reference of the HSWA Card 3. Compulsory Compulsory Compulsory Compulsory Type the parameter value in the text box directly. the PON interface card software. Then the Upgrade and Backup System Software window will appear.3 Upgrading System Software Command function The system software upgrade command is used to upgrade the card software. and OLT Firmware. Type the parameter value in the text box directly. The slot number of the card to be upgraded. Parameter Parameter Name Parameter Description Property Configuration Method Compulsory Click the drop-down list to select the value. Access method Right-click the HSWA card in the object tree pane. please click the drop-down list to select the value. When Manual Input is not selected.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Property Configuration Method When Manual Input is selected. Type the parameter — Compulsory value in the text box directly. Then the Upgrade and Backup System Software window will appear. Type the name of Compulsory the backed-up file directly. Type the parameter — Compulsory value in the text box directly. Version: A . When the system needs restoration. Parameter Parameter Name FtpServerIP UserName Password FileName 3-184 Parameter Description The IP address of the FTP server. The user name to log in the FTP server. The name of the backed-up file. users can FileName The name of the upgrade file. so as to restore the system to the backed-up software version. The password to log in the FTP server. users can execute the Upgrade Software command to read the upgrade file from this server. and select Control Command  Backup Software in the shortcut menu. Its maximum length is 16 characters.25. Value Range / Requirement Property Configuration Method Type the parameter — Compulsory value in the text box directly. 3.4 Backing up System Software Command function The system software backup command is used to back up the system software to an appointed server. Compulsory type the parameter value directly. Type the parameter value in the text box directly.5 Upgrading Line Interface Cards in a Batch Manner Command function The line interface card batch upgrade command is used to upgrade the line interface card software in a batch manner. Compulsory Password The password to log in the FTP server.25. Access method Right-click the HSWA card in the object tree pane. Type the parameter value directly or FileName The name of the upgrade file. Type the parameter value in the text box directly.25.6 Upgrading ONUs Automatically Command function Version: A 3-185 . Property Compulsory FtpServerIP The IP address of the FTP server. Compulsory Configuration Method Click the drop-down list to select the value. and select Control Command  Batch Upgrade Line Card in the shortcut menu. Type the parameter value in the text box directly. Compulsory click the drop-down list to select the value. Compulsory UserName The user name to log in the FTP server. Its value should be PONINF.3 GUI Reference of the HSWA Card 3. Parameter Parameter Name FileType Parameter Description The type of the file to be downloaded. 3. Then the Batch Upgrade Line Card window will appear. It is used to provide the upgrade file — for users to download. an ONU under this slot will Enable/Disable upgrade automatically via obtaining the upgrade file from the appointed Click the — Compulsory drop-down list to select the value. the ONU will download the upgrade file to perform the upgrade operation. This parameter is Double-click to valid only when type the Enable/Disable is parameter value. set to Enable.AN5516-06 Optical Line Terminal Equipment GUI Reference The ONU automatic upgrade command is used to configure the automatic upgrade function of all ONUs under a certain slot. and select Config  ONU Auto Upgrade in the shortcut menu. When the ONU automatic upgrade function is enabled. FTP Server IPaddress The IP address of the FTP server. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the line Slot No. Access method Right-click the HSWA card in the object tree pane. each ONU under this slot will compare its own file to the upgrade file. interface card connected with the — Read-only — ONU to be upgraded. After the automatic upgrade succeeds. When this parameter is set to Enable. Optional. FTP server. When this parameter is set to Disable. the system supports manual upgrade of ONUs under this slot. 3-186 Version: A . if upgrade is needed. The enable / disable switch of the ONU automatic upgrade function. FTP Username The user name to log in the FTP server. it will perform the upgrade operation automatically. Then the ONU Auto Upgrade window will appear. set to Enable. — This parameter is Double-click to valid only when type the Enable/Disable is parameter value. Optional. the upgraded ONU will be restarted. Users can also perform the auto-upgrade pre-configuration of all ONUs under a certain slot. After a certain ONU is electrified. 3. — This parameter is Double-click to valid only when type the Enable/Disable is parameter value. The PON port number of the service interface card connected with the ONU. The name of Users can select multiple upgrade the upgrade files. Viewing ONU Automatic Upgrade Log Command function The viewing ONU automatic upgrade log command is used to view the history records on automatic upgrade of ONUs. Read-only Read-only 3-187 . upgraded together (the IAD the software cannot support Auto Upgrade combination upgrade now). Parameter Parameter Name Parameter Description Property Time The generation time of the automatic upgrade log. Version: A The number of the slot containing the service interface card connected with the ONU.25. FTP Password The password to log in the FTP server. and select the upgrade file name in the window that appears.7 ONU Double-click a blank area. PON Port No. set to Enable. window. File Name The name of the upgrade file. Then the ONU Auto Upgrade Log window will appear. server should Optional. Access method Right-click the HSWA card in the object tree pane. but the total file size should file on the FTP not exceed 3M. meaning that the ONU file name Enable/Disable is firmware and the CPU software are displayed in set to Enable. and select Get Information  ONU Auto Upgrade Log in the shortcut menu. Presently the equipment supports be the same This parameter is combination upgrade of the ONU as the upgrade valid only when software.3 GUI Reference of the HSWA Card Parameter Name Parameter Description Value Range / Requirement Configuration Property Method Optional. Read-only Slot No. The ONU upgrade file name. To file. Then the Batch Upgrade ONU window will appear. (including app. Access method Right-click the HSWA card in the object tree pane. File Name 3. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method To upgrade the CPU or built-in IAD of the ONU. Main Download Succeed/Failure. and select Control Command  Batch Upgrade ONU in the shortcut menu. Line Card Download Upgrade File Read-only Succeed/Failure. Its value includes Auto Upgrade Succeed/Failure. select ONU FileType The type of the ONU upgrade CPU/IAD. upgrade the Its value includes ONU firmware CPU/IAD and ONU Firmware. Upgrade Type Not Match. Read-only The status information in the automatic upgrade process. and New Version Start Failure. Line Card Download from Main Event Code Succeed/Failure. The authorization number of the ONU. Compulsory Click the drop-down list to select the value. and pers) of the ONU.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Property ONU No.25.8 Read-only Upgrading ONUs in a Batch Manner Command function The ONU batch upgrade command is used to upgrade the ONU software in a batch manner. The ONU software to be upgraded includes the ONU system software and the ONU firmware. 3-188 Version: A . select ONU Firmware. boot. 3-189 . and select Control Command  Import Config in the shortcut menu. Parameter Parameter Name FtpServerIP Parameter Description The IP address of the FTP server. upgraded. Type the — Compulsory parameter value in the text box. FTP The user name to log in UserName the FTP server.9 Importing Configuration Files Command function The importing configuration files command is used to download configuration files to the Flash of the HSWA card from the FTP server. containing the line interface card connected with the ONU to be — Compulsory Click the drop-down list to select the value. FTP The user name to log in the FTP UserName server.3 GUI Reference of the HSWA Card Parameter Name FtpServerIP Value Range / Parameter Description Requirement The IP address of the FTP server. Access method Right-click the HSWA card in the object tree pane. Type the parameter value in the text box directly. Type the parameter value File Name The upgrade file name.25. — Compulsory directly or click the drop-down list to select the value. FTP The password to log in the FTP Password server. Type the parameter value in the text box directly. Then the Import Config window will appear. 3. The number of the slot Slot No. Property Configuration Method — Compulsory — Compulsory — Compulsory Type the parameter value in the text box directly. Version: A Value Range / Requirement Property Configuration Method Type the — Compulsory parameter value in the text box. AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description FTP The password to log in the Password FTP server. Type the parameter value directly. characters. FTP The user name to log in UserName the FTP server.25. 3.10 Exporting Configuration Files Command function The exporting configuration files command is used to export the configuration files from the Flash of the HSWA card to the FTP server. Value Range / Requirement Property Configuration Method Type the Compulsory — parameter value in the text box. The name of the upgrade file on The name of the FileName configuration file imported to the equipment. Parameter Parameter Name FtpServerIP Parameter Description The IP address of the FTP server. the FTP server should be the same as the upgrade file name typed in the ANM2000. Type the parameter value in the text box directly. FTP The password to log in the Password FTP server. Its length should be less than 16 Type the Compulsory parameter value directly. characters. and select Control Command  Export config in the shortcut menu. Version: A . Then the Export Config window will appear. Access method Right-click the HSWA card in the object tree pane. Compulsory Configuration Method Type the parameter value in the text box directly. FileName 3-190 Value Range / Requirement Property — Compulsory — Compulsory — Compulsory The name of the Its length configuration file to be should be less exported to the FTP than 16 server. Type the parameter value in the text box directly. Except Manage VLAN.  After Clear All Config is selected. Its value includes Clear All Config and Clear All Config Compulsory Click the drop-down list to select the value. Then the Erase FLASH window will appear.25.3 GUI Reference of the HSWA Card 3. the equipment will be restarted automatically. Version: A 3-191 .  After Clear All Config Except Manage VLAN is selected. Please do not execute this command randomly.  After the Erase Flash command is executed. Access method Right-click the HSWA card in the object tree pane.11 Clearing Configuration in Flash Command function The clearing-configuration-in-Flash command is used to clear all configuration information in the Flash of the HSWA card of the current equipment and restore the equipment to factory settings. users still can access the equipment via the ANM2000. and select Control Command  Erase Flash in the shortcut menu. users cannot access the equipment via the ANM2000. Caution: This command will clear all user configurations in the equipment. Parameter Parameter Name Parameter Description Property Configuration Method Two operation modes to clear the configuration information Action in the Flash. and restore the equipment to factory settings. Caution: This command can interrupt services on the line interface card. In this process. 16.26. and select Control Command  Batch Reset Line Card in the shortcut menu. After a line interface card is reset. Version: A . the ACT indicator LED on the card panel will first blink slowly. Then the Batch Reset Line Card window will appear.26 Reset Operation 3.1 Resetting Line Interface Cards in a Batch Manner Command function The line interface card batch reset command is used to reset line interface cards in a batch manner. Please do not execute this command randomly. Parameter Parameter Name Slot No. and finally be illuminated. Property Configuration Method Double-click to Compulsory type the slot number. it will obtain configuration from the core switch card automatically.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. Access method Right-click the HSWA card in the object tree pane. 3-192 Parameter Description Value Range / Requirement The slot number of the line The value range is 11 to interface card to be reset. then blink quickly. Users can execute this command after the line interface card software is upgraded or a line interface card is faulty. Caution: This command can interrupt related services. When it is set to a certain slot number. Compulsory Click the drop-down list to select the value.2 Restarting an Appointed Device Command function The appointed device restarting command is used to restart the entire system or the card in a certain slot.3 GUI Reference of the HSWA Card 3. Users can execute this command after the software of the appointed device is upgraded or the appointed device is faulty. and finally be illuminated. After the appointed device is reset. Slot No.26. Version: A 3-193 . the entire system will be restarted. only the card in this slot will be restarted. Parameter Parameter Name Parameter Description Property Configuration Method The entire system or the slot number of the card to be restarted. Please do not execute this command randomly. it will obtain configuration automatically. When it is set to Reset System. Access method Right-click the HSWA card in the object tree pane. Then the Reset the Equipment window will appear. then blink quickly. In this process. and select Control Command  Reboot the Appointed Device in the shortcut menu. the ACT indicator LED on the card panel will first blink slowly. Please do not execute this command randomly. the ACT indicator LED on its panel will first blink slowly. Then the Reset Standby HSWX window will appear. and finally be illuminated. Then the reset PON window will appear.AN5516-06 Optical Line Terminal Equipment GUI Reference 3.3 Resetting Standby Card Command function The resetting standby card command is used to reset the standby core switch card. 3.4 Resetting a PON Port Command function The resetting PON port command is used to restart a PON port. Access method Right-click the HSWA card in the object tree pane. Command Succeed will be displayed in the command result pane of the window.26. This command is mainly used to test the performance of a PON port. After this command is executed. Click the OK button in this window to execute the command. and select Control Command  Reset Standby HSWX in the shortcut menu. Users can execute this command after the software of the standby core switch card is upgraded. After the standby core switch card is reset.26. and select Control Command  Reset PON in the shortcut menu. then blink quickly. After the standby core switch card is reset successfully. Caution: This command can interrupt services on the PON port. the ONU connected with this PON port will register again. Access method Right-click the HSWA card in the object tree pane. 3-194 Version: A . Version: A Method Click the The slot number of the card Slot No. reset. be reset.3 GUI Reference of the HSWA Card Parameter Parameter Name Parameter Description Value Range / Requirement Property containing the PON port to be — Compulsory drop-down list to select the value. 8. Configuration Double-click to Compulsory type the PON port number. 3-195 . PON Port The number of the PON port to The value range is 1 to No. value Log File. — Compulsory parameter value in the text box directly. Then the Export Log window will appear.1 Exporting Log Files Command function The exporting log file command is used to export the system operating log to an appointed server. — Compulsory parameter value in the text box directly. Please use the default Click the — Compulsory select the value. Type the UserName The user name to log in the FTP server. The type of the log file to be FileType exported.27 Log Operation 3. Double-click to Its length should not FileName The name of the log file to be exceed 20 characters exported. Type the Password The password to log in the FTP server. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Type the FtpServerIP The IP address of the FTP server. (including the file name postfix). and select Control Command  Export Log in the shortcut menu. Access method Right-click the HSWA card in the object tree pane.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. Version: A . — Compulsory parameter value in the text box directly. 3-196 drop-down list to Compulsory type the name of the log file to be exported.27. etc. to 43200. In addition.27. and select Control Command  System Log Auto Upload in the shortcut menu.2 Uploading System Log Automatically Command function The automatically uploading system log command is used to enable or disable the function of automatically uploading the system log to an appointed network management server. server. Report hostip Method Click the Optional. This parameter is valid only when Enable is set to ON. it can be used to set interval of automatic uploading operation. Access method Right-click the HSWA card in the object tree pane. Optional.3 GUI Reference of the HSWA Card 3. Value Range / Requirement Property — Compulsory The interval of the system log to The value range is 60 Interval (s) be uploaded. the IP address of the appointed network management server. User The user name to log in the FTP server. Parameter Parameter Name Enable Parameter Description Enables or disables the system log automatic upload function. This parameter — is valid only when Enable is set to ON. Type the parameter value in the text box directly. Optional. This parameter — is valid only when Enable is set to ON. 3-197 . Then the System Log Auto Upload window will appear. The IP address of the FTP Configuration Double-click to type the interval of the system log to be uploaded. Version: A drop-down list to select the value. Type the parameter value in the text box directly. AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Optional. 3-198 Configuration Method Type the parameter value in the text box directly. Version: A . This parameter — is valid only when Enable is set to ON. Password The password to log in the FTP server. and select Control Command  Force Switch in the shortcut menu. Command Succeed will be displayed in the command result pane of the window.3 GUI Reference of the HSWA Card 3. This command is generally executed before users replace the active core switch card or upgrade the software of the active core switch card. Then the Force Switch window will appear. Access method Right-click the HSWA card in the object tree pane. After the forced switching is successful. Version: A 3-199 .28 Forced Active / Standby Switch Command function The forced active / standby switch command is used to perform forced switching between the active and standby core switch cards. Click the OK button in this window to execute the command. Parameter Description The number of the slot containing the card. 3. Access method Right-click the HSWA card in the object tree pane. Then the Card Version window will appear.2 Value Range / Requirement Property Configuration Method — Read-only — — Read-only — — Read-only — Viewing System Time Command function The viewing system time command is used to view the OLT equipment system time and the network management server time. Hardware The hardware version number of Version the card.29. 3-200 Version: A . and select Get Information  Card Version in the shortcut menu.29 Viewing System Information 3.AN5516-06 Optical Line Terminal Equipment GUI Reference 3. Parameter Parameter Name Slot No. The information items to be viewed include the software version number and the hardware version number. Then the System Time window will appear.29. Access method Right-click the HSWA card in the object tree pane. Software The software version number of Version the card. and select Get Information  System Time in the shortcut menu.1 Viewing Card Software / Hardware Version Command function The viewing card software / hardware version command is used to view the software / hardware version information of the card in a certain slot. Access method Right-click the HSWA card in the object tree pane. Read-only The present condition and active / standby status of the Status HSWA card. and select Get Information  System Status in the shortcut menu. 3.3 Value Range / Requirement Property Configuration Method — Read-only — — Read-only — Viewing System Status Command function The viewing system status command is used to view the present condition and active / standby status of the current HSWA card. Parameter Parameter Name Parameter Description Property Type The operating status of the HSWA card. The slot number of the HSWA card. and Absent. Server The network management Time server time. Read-only Slot No. Then the System Status window will appear.3 GUI Reference of the HSWA Card Parameter Parameter Name System Time Parameter Description The equipment system time.29. Read-only Its value includes Active. Backup. Version: A 3-201 . . and includes the following sections. Configuration command Control command Get information command Version: A 4-1 .4 GUI Reference of the EC4B / EC8B Card This chapter discusses operation commands of the AN5516-06 EC4B / EC8B card in detail. adjustment Compulsory difference of the OLT transmitting optical power.1.00. PON No. Parameter Parameter Name Slot No.AN5516-06 Optical Line Terminal Equipment GUI Reference 4. The PON port number of the EC4B / EC8B card. 4-2 Version: A . users can execute this command to adjust the optical power. Parameter Description The slot number of the EC4B / EC8B card.1 Configuration Command 4. Access method Right-click the EC4B / EC8B card in the object tree. and select Config  OLT Optical Compensation in the shortcut menu. dBm. Configuration Value Range / Requirement Property — Read-only — — Read-only — Method Double-click to type the Tx Adjustment (dBm) The adjustment difference of The value range is -100.00 to the OLT transmitting optical 100.1 Configuring OLT Optical Power Compensation Command function The OLT optical power compensation configuration command is used to compensate the optical power of an OLT. with the unit being power. When the transmitting or receiving optical power of an OLT is too high or too low. After a certain port is disabled. Please do not execute this command randomly. this port will stop transmitting optical signals. Enable and Disable indicates enabling the Disable. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — Enable indicates disabling the Its value includes appointed PON port. PON No. Disable/Enable Version: A Parameter Description The slot number of the EC4B / EC8B card. 4-3 .4 GUI Reference of the EC4B / EC8B Card 4.1. Click the drop-down Compulsory list to select the value. and select Config  Enable/Disable PON in the shortcut menu. and all ONUs connected with this PON port will enter unregistered status. The PON port number of the EC4B / EC8B card.2 Enabling / Disabling a PON Port Caution: This command can interrupt services on the PON port. Command function The enabling / disabling PON port command is used to enable or disable a certain PON port. The default appointed PON port. Parameter Parameter Name Slot No. value is Disable. Access method Right-click the EC4B / EC8B card in the object tree. Access method Right-click the EC4B / EC8B card in the object tree. Value Range / Requirement — Property Read-only Configuration Method — Enable indicates setting isolation State between services at various PON Its value includes ports. Compulsory Click the drop-down list to select the value. Parameter Description The slot number of the EC4B / EC8B card. This function can be used to suppress broadcast storm inside the card. Disable indicates canceling The default value is isolation between services at Enable. 4-4 Version: A .1. Parameter Parameter Name Slot No. Enable and Disable.AN5516-06 Optical Line Terminal Equipment GUI Reference 4. and select Config  PON Isolation in the shortcut menu.3 Configuring PON Port Isolation Command function The PON port isolation is described as follows: The four / eight PON ports in the same EC4B / EC8B card cannot communicate with each other unless they are connected with external equipment. various PON ports. a new ONU is added. so some system parameters should be configured again. etc. The operating mode of the PON port. ONU SVLAN / CVLAN setting. The PON port number of the EC4B / EC8B card. Parameter Parameter Name Slot No.1. Compulsory Click the drop-down list to select the value. In this case.4 GUI Reference of the EC4B / EC8B Card 4. and select Config  PON Mode in the shortcut menu. If users change the value of the PON port operating mode from 1Gbit/s to 2 Gbit/s.4 Configuring PON Port Operating Mode Caution: When users modify the operating mode of a certain PON port. 4-5 . Value Range / Requirement Property Configuration Method — Read-only — — Read-only — Users can select one of the two values: 1G and 2G. the services on this port and the adjacent PON ports (these PON ports share the chip with this port) will be interrupted. The PON port of the EC4B / EC8B card supports two operating modes: 1 Gbit/s and 2 Gbit/s. the remote end equipment should also be an ONU with the rate of 2 Gbit/s. Command function The PON port operating mode configuration command is used to configure or view the current operating status of each PON port of the EC4B / EC8B card. Mode Version: A Parameter Description The slot number of the EC4B / EC8B card. these parameters and the related operations include authorization of the ONU. Access method Right-click the EC4B / EC8B card in the object tree. So please do not execute this command randomly. binding the PON port with an OLT QinQ domain. PON No. This process can cause interruption of subscriber services. Version: A . at the receiving end. FEC (Forward Error Correction): Before the signal is transmitted. The PON port number of the EC4B / EC8B card. its FEC function in the uplink and downlink directions must be configured as the same enabling / disabling status. the system performs decoding according to the same algorithm mentioned previously. and Disable. After the FEC function of a PON port is enabled. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — — Read-only — Enables / disables the FEC function in the Its value uplink or downlink direction of the signal in includes Enable the PON port. The uplink or downlink direction of the signal in the PON port. the system performs encoding of the signal according to a certain algorithm. PON Port Direction Enable/Di sable 4-6 Parameter Description The slot number of the EC4B / EC8B card. and select Config  PON FEC Enable in the shortcut menu.5 Enabling / Disabling FEC Function of a PON Port Caution: For the same PON port. The purpose is to discover errors and correct them. and inserts the redundancy information into the signal. the ONUs connected with this PON port will first enter unregistered status. Access method Right-click the EC4B / EC8B card in the object tree. and then register to the EC4B / EC8B card again. Compulsor y Click the drop-down list to select the value.1. Command function The enabling / disabling PON port FEC function command is used to configure or view the FEC function of each PON port of the EC4B / EC8B card. Parameter Parameter Name Slot No.AN5516-06 Optical Line Terminal Equipment GUI Reference 4. the EC4B / EC8B card. Parameter Parameter Name Slot No. Parameter Description The slot number of the EC4B / EC8B card. Value Range / Requirement Property — Read-only The EC4B card: The value can be PON Port The PON port number of 1 to 4.1. the PON port. If Manual is selected. 4. and select Config  DBA Para Config in the shortcut menu. Its value includes Manual and Auto. and users cannot modify them. If Auto is selected. users can modify values of the other parameters manually.6 Configuring DBA Parameters Command function DBA refers to the dynamic bandwidth assignment mechanism. 1 to 8. The DBA parameter configuration command is used to configure the DBA parameters of the appointed PON port. the operation principle is to assign the bandwidth authorization according to the queue status information reported by the LLID. the other PON DBA Parammode The DBA parameter parameters will use their default configuration mode of values assigned by the system. Click the Compulsory drop-down list to select the value. Version: A 4-7 .4 GUI Reference of the EC4B / EC8B Card Parameter Name Value Range / Parameter Description Requirement Property Configuration Method The default value is Disable. It is used to increase the utilization ratio of the uplink bandwidth in the system and guarantee service fairness and QoS. Access method Right-click the EC4B / EC8B card in the object tree. The EC8B card: The value can be Configuration Method — Double-click to Compulsory type the PON port number. Dropdown Click the Compulsory drop-down list to select the value. select the value. The unit is kb. The being 4. with the step 2 (KB) level 1 scheduler. Compulsory drop-down list to select the value. The uplink bandwidth scheduling weight reserved for the level 5 The value is an integer in the Weight Level scheduler by the OLT range [0 to 256]. level 0 scheduler has the highest priority. The being 4. 4-8 Version: A . The uplink bandwidth scheduling weight Dropdown reserved for the level 4 The value is an integer in the Weight Level scheduler by the OLT range [0 to 256]. Click the Compulsory drop-down list to level 0 scheduler has the highest priority. level 0 scheduler has the highest priority. The unit is kb. The being 4.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The uplink bandwidth scheduling weight Dropdown reserved for the level 1 The value is an integer in the Click the Weight Level scheduler by the OLT range [0 to 256]. select the value. with the step 4 (KB) level 3 scheduler. The being 4. The unit is kb. The unit is kb. The being 4. The uplink bandwidth scheduling weight Dropdown reserved for the level 3 The value is an integer in the Weight Level scheduler by the OLT range [0 to 256]. Click the Compulsory drop-down list to level 0 scheduler has the highest priority. Click the Compulsory drop-down list to level 0 scheduler has the highest priority. with the step 1 (KB) level 0 scheduler. The unit is kb. with the step 5 (KB) level 4 scheduler. with the step 3 (KB) level 2 scheduler. The uplink bandwidth scheduling weight Dropdown reserved for the level 2 The value is an integer in the Weight Level scheduler by the OLT range [0 to 256]. select the value. The value is an integer in the Double-click to range [0 to 15000]. The unit is Compulsory type the 65. The being 4. The unit is kb. The value is an integer in the Double-click to range [0 to 15000]. parameter value.5us) Polling rate Level 5 (65.4 GUI Reference of the EC4B / EC8B Card Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The uplink bandwidth scheduling weight Dropdown reserved for the level 6 The value is an integer in the Click the Weight Level scheduler by the OLT range [0 to 256]. The frequency of the OLT level 3 scheduler sending the grants frame to the ONU. The frequency of the OLT level 2 scheduler sending the grants frame to the ONU.5 µs. The being 4. The unit is Compulsory type the 65. The value is an integer in the range [0 to 15000].5us) Polling rate Level 3 (65.5us) Polling rate Level 4 (65. The frequency of the OLT level 4 scheduler sending the grants frame to the ONU. The unit is Compulsory 65.5 µs. select the value. The uplink bandwidth scheduling weight Dropdown reserved for the level 7 The value is an integer in the Weight Level scheduler by the OLT range [0 to 256].5 µs. The unit is Compulsory type the 65.5 µs. The unit is Compulsory type the 65. parameter value.5us) Polling rate Level 1 (65. 4-9 . with the step 6 (KB) level 5 scheduler. The frequency of the OLT level 1 scheduler sending the grants frame to the ONU.5us) Polling rate Level 2 (65. select the value. range [0 to 15000]. The value is an integer in the Double-click to Compulsory drop-down list to level 0 scheduler has the highest priority. parameter value. parameter value. parameter value. The unit is kb. Click the Compulsory drop-down list to level 0 scheduler has the highest priority. Polling rate Level 0 (65.5 µs. The value is an integer in the Double-click to range [0 to 15000].5 µs. type the Double-click to Compulsory type the parameter value. The value is an integer in the Double-click to range [0 to 15000].5us) Version: A The frequency of the OLT level 0 scheduler sending the grants frame to the ONU. The unit is 65. The frequency of the OLT level 5 scheduler sending the grants frame to the ONU. with the step 7 (KB) level 6 scheduler. 5 µs. Value Range / Requirement Property The value is an integer in the range [0 to 15000]. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — The performance statistics category of the EC4B / EC8B card. and CPU / 4-10 Version: A . Dropdown Weight Level 7 (KB). It range [0 to 15000]. and CPU / memory utilization ratio.5us) Parameter Description The frequency of the OLT level 6 scheduler sending the grants frame to the ONU. parameter value. Its value Perf Code corresponds to three performance statistics categories: PON port performance statistics data.7 Enabling / Disabling Performance Classification Command function The performance classification enabling / disabling command is used to enable / disable classification function of the appointed performance parameters. optical module parameters. and select Config  OLT Perf Sort Line Switch in the shortcut menu. Parameter Description The slot number of the EC4B / EC8B card.1.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Polling rate Level 6 (65. Double-click to The frequency of the OLT level 7 scheduler Polling rate sending the grants The value is an integer in the Level 7 frame to the ONU.5 µs.5us) corresponds to 65. These performance parameters include PON port performance statistics data. Compulsory type the parameter value. Access method Right-click the EC4B / EC8B card in the object tree. optical module parameters. 4. Parameter Parameter Name Slot No. The unit is Configuration Method Double-click to Compulsory type the 65. The unit is (65. The name of the OLT QinQ domain. Domainname One PON port can be bound with multiple OLT QinQ domains at the same time.8 Click the Compulsory drop-down list to select the value. The PON port number of the EC4B / EC8B card. Version: A Click the — Compulsory drop-down list to select the value. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — attach means binding the services of Action the PON port with an OLT QinQ Its values include domain. 4-11 . detach means unbinding the services The default value is of the PON port with an OLT QinQ attach. users need to complete the related operations of OLT QinQ domains. Access method Right-click the EC4B / EC8B card in the object tree. Parameter Description The slot number of the EC4B / EC8B card. attach and detach.1. Before performing this configuration command. Binding / Unbinding a PON Port with a Domain Command function The binding / unbinding-PON-port-with-domain command is used to configure and view the status of an EC4B / EC8B PON port binding with OLT QinQ domains. 4. domain. PON Port No. and Disable. and select Config  PON Attach/Detach Domain in the shortcut menu. Switch Enables / disables classification Its value function of the appointed includes Enable performance parameters.4 GUI Reference of the EC4B / EC8B Card Parameter Name Parameter Description Value Range / Requirement Property Configuration Method memory utilization ratio. Click the Compulsory drop-down list to select the value. Parameter Parameter Name Slot No. and unknown packet.1. Enable and Disable. The value range of Speed (Packet/second) The system will discard the speed control is 1 to packets exceeding the set 33554431.9 Suppressing Broadcast / Multicast / Unknown Packet of a PON Port Command function The PON port broadcast / multicast / unknown packet suppression command is used to configure and view broadcast / multicast / unknown packet suppression function of a PON port. with the unit speed control threshold. Its purpose is to prevent generation of broadcast storm inside the system and improve the system performance. function.AN5516-06 Optical Line Terminal Equipment GUI Reference 4. Access method Right-click the EC4B / EC8B card in the object tree. The PON port number of the EC4B / EC8B card. PON Port No. being packet/ second. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — — Read-only — The packet type of the appointed PON port. Click the Compulsory drop-down list to select the value. Double-click to Compulsory type the parameter value. multicast packet. Parameter Parameter Name Slot No. 4-12 Version: A . Parameter Description The slot number of the EC4B / EC8B card. The Packet Type type includes broadcast packet. and select Config  Packet Rate Control in the shortcut menu. The default value is 150. Disable indicates disabling The default value is the packet suppression Enable. Enable indicates enabling Keep-alive the packet suppression Its values include function. 4. Access method Right-click the EC4B / EC8B card in the object. Parameter Parameter Parameter Description Name Slot No. Value Range / Property Requirement The slot number of the EC4B / EC8B card.2 — Configuration Method Read-only — Deauthorizing an ONU Command function The deauthorizing ONU command is used to deauthorize the appointed ONU.2.2 Control Command 4.1 Resetting Command function The resetting command is used to reset the EC4B / EC8B card. Access method Right-click the EC4B / EC8B card in the object tree. and select Control Command  Reset in the shortcut menu.2. Version: A 4-13 .4 GUI Reference of the EC4B / EC8B Card 4. and select Control Command  Deauthorize ONU in the shortcut menu. with PON2 port of the EC4B / EC8B card. EC4B / EC8B card. and select Control Command  Reset ONU in the shortcut menu. Value Range / Requirement — Property Read-only For the EC4B card. After an ONU is restarted. The ONU authorization For an ONU connected number. the Double-click to value range is 1 to 64. they follow the similar rules. 4-14 Version: A . For an ONU connected with PON1 port of the EC4B / EC8B card. the Compulsory type the ONU authorization number. the PON Port The PON port number of the value range is 1 to 4. value range is 1 to 8. No. 4. Onu No. it will register to the OLT again.3 Resetting an ONU Command function The resetting ONU command is used to restart the appointed ONU. For the EC8B card. For other ONUs.2. the Configuration Method — Double-click to Compulsory type the PON port number. Access method Right-click the EC4B / EC8B card in the object tree.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Slot No. value range is 65 to 128. Parameter Description The slot number of the EC4B / EC8B card. 4 GUI Reference of the EC4B / EC8B Card Parameter Parameter Name Slot No. Parameter Description The slot number of the EC4B / EC8B card. Value Range / Requirement — Property Read-only Configuration Method — For the EC4B card. value range is 1 to 8. For the EC8B card. 4. value range is 1 to 8. No. Parameter Description The slot number of the EC4B / EC8B card. EC4B / EC8B card. Double-click to type Compulsory the ONU authorization number. the Compulsory Double-click to type the PON port number. and select Control Command  Restore ONU in the shortcut menu.2. number. Parameter Parameter Name OLT No. No. Value Range / Requirement — Configuration Property Method Read-only — Click the For the EC4B card. For the EC8B card. Version: A The ONU authorization The value range is 1 to number. the PON Port The PON port number of the value range is 1 to 4. 4-15 . 64. The ONU authorization The value range is 1 to 64. Double-click to Onu No.4 Refreshing Firmware Command function The refreshing firmware command is used to run the firmware of the appointed ONU connected with the EC4B / EC8B card once again. ONU No. the PON Port The PON port number of the value range is 1 to 4. Access method Right-click the EC4B / EC8B card in the object tree. EC4B / EC8B card. This command is generally used when an ONU has faults. type the ONU Compulsory authorization number. the drop-down list to Compulsory select the PON port number. Access method Right-click the EC4B / EC8B card in the object tree. The PON port number of the EC4B / EC8B card. Read-only The internal CPU software version number of the ONU. Read-only PON Port No. Read-only Actual Type The actual hardware type of the ONU. Read-only Configured Type The ONU type configured in the ANM2000. Hardware Version The hardware number of the ONU. and select Get Information  ONU Information in the shortcut menu. so as to help troubleshoot faults or applying the new software to the hardware. TDM Hardware The hardware number of the built-in TDM subcard (for TDM Version processing) in the ONU. Read-only ONU No. The slot number of the EC4B / EC8B card.3 Get Information Command 4. users can execute this command to analyze related problems.AN5516-06 Optical Line Terminal Equipment GUI Reference 4.1 Viewing ONU Type and Version Number Command function The viewing ONU type and version number command is used to view the types and software / hardware version numbers of all registered ONUs connected with the EC4B / EC8B card. CPU Software Version 4-16 Read-only Read-only Read-only Read-only Version: A . The ONU authorization number. Read-only IAD Software The internal IAD firmware (for voice processing) version Version number of the ONU. When an ONU is faulty or its software is upgraded. Parameter Parameter Name Parameter Description Property Slot No.3. Read-only Firmware Version The internal CPU firmware version number of the ONU. IAD Hardware The hardware number of the built-in IAD (for voice Version processing) in the ONU. Parameter Parameter Name Slot No. 4-17 .2 Viewing PON Port Firmware Version Command function The viewing PON port firmware version command is used to view the firmware version on the appointed PON port of the EC4B / EC8B card. the Version Version: A Method — Double-click to Compulsory type the PON port number. The PON port number of the value range is 1 to 4. and select Get Information  PON Firmware Version in the shortcut menu. value range is 1 to 8. Parameter Description The slot number of the EC4B / EC8B card. the PON No. PON Firmware Configuration The firmware version on the appointed PON port of the — Read-only — EC4B / EC8B card. Value Range / Requirement — Property Read-only For the EC4B card. For the EC8B card.4 GUI Reference of the EC4B / EC8B Card 4. Access method Right-click the EC4B / EC8B card in the object tree.3. EC4B / EC8B card. The ONU authorization number. Access method Right-click the EC4B / EC8B card in the object tree. PHISIC-ID/LOGIC-ID Mode Mixed Authentication. The PON port number of the EC4B / EC8B card. Read-only Password This parameter is only valid for the GPON equipment. with the format being XX-XX-XX-XX-XX-XX. Status 4-18 The current status of the ONU. Read-only ONU No.3. PHISIC-ID+Password Authentication. such as AN5006-04. Pre-Authcated. Read-only Physical SN The MAC address of the ONU. Read-only PON No. Password Authentication Authentication LOGIC-ID Authentication. The slot number of the EC4B / EC8B card. and Reserve. Read-only The SN password of the ONU. this parameter refers ONU Type to the type value.3 Viewing ONU Authorization List Command function The viewing ONU authorization list command is used to view information of authorized ONUs connected with the appointed PON port of the EC4B / EC8B card. The authentication mode of the ONU. for ONUs of other vendors. Read-only LogicSN: LOID The SN number of the ONU. The authorized ONUs include all online and offline ONUs. Parameter Parameter Name Parameter Description Property Slot No. Its value includes Authcated. and PHISIC-ID/LOGIC-ID Mixed Authentication (No Password). and select Get Information  ONU Authcated Table in the shortcut menu. Read-only this parameter value will be displayed as Others. Its value includes: PHISIC-ID Authentication. NO Authentication.AN5516-06 Optical Line Terminal Equipment GUI Reference 4. LOGIC-ID Read-only Authentication (No Password). Read-only LogicSN: Password For various types of FiberHome EPON ONUs. Read-only Version: A . Read-only Physical SN The MAC address of the ONU. The PON port number of the EC4B / EC8B card.4 Viewing Unauthorized ONU List Command function The viewing unauthorized ONU list command is used to view information of unauthorized ONUs connected with the appointed PON port of the EC4B / EC8B card. The slot number of the EC4B / EC8B card. and select Get Information  Registered ONU List in the shortcut menu. Read-only PON No. Access method Right-click the EC4B / EC8B card in the object tree. with the format being XX-XX-XX-XX-XX-XX. Parameter Parameter Name Parameter Description Property Slot No. Read-only The SN password of the ONU. and select Get Information  ONU Unauthorized Table in the shortcut menu.3.3.5 Viewing Registered ONU List Command function The viewing registered ONU list command is used to view information of authorized and online ONUs connected with the appointed PON port of the EC4B / EC8B card. Read-only LogicSN: LOID The SN number of the ONU. Version: A 4-19 .4 GUI Reference of the EC4B / EC8B Card 4. Access method Right-click the EC4B / EC8B card in the object tree. Read-only Password This parameter is only valid for the GPON equipment. Read-only LogicSN: Password 4. The unauthorized ONUs here include all online ONUs. Read-only Physical SN The MAC address of the ONU. Read-only The MAC address of the ONU. such as AN5006-04. this parameter refers to the type value. The ONU authorization number. Read-only LogicSN: Password The SN password of the ONU. for ONUs of Onu Type other vendors. and select Get Information  No-Registered ONU List in the shortcut menu. The PON port number of the EC4B / EC8B card. Read-only Password This parameter is only valid for the GPON equipment. Access method Right-click the EC4B / EC8B card in the object tree. with the format being XX-XX-XX-XX-XX-XX. The slot number of the EC4B / EC8B card. Read-only PON No. Read-only Password This parameter is only valid for the GPON equipment.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Property Slot No. Parameter Parameter Name Parameter Description Property Slot No. The ONU authorization number.6 Viewing Unregistered ONU List Command function The viewing unregistered ONU list command is used to view information of unregistered ONUs connected with the appointed PON port of the EC4B / EC8B card. Read-only ONU No. Read-only PON Port The PON port number of the EC4B / EC8B card.3. Read-only ONU No. Read-only 4-20 Version: A . 4. Read-only For various types of FiberHome EPON ONUs. Read-only LogicSN: LOID The SN number of the ONU. with the format being Physical SN XX-XX-XX-XX-XX-XX. The slot number of the EC4B / EC8B card. Read-only LogicSN: LOID The SN number of the ONU. this parameter value will be displayed as Read-only Others. Read-only LogicSN: Password The SN password of the ONU. such as AN5006-04. and select Get Information  MAC Learning Table on PON in the shortcut menu. The prerequisite is that service data stream is passing through an ONU. for Onu Type ONUs of other vendors. Read-only Viewing Optical Module Parameters Command function The viewing optical module parameters command is used to view the parameters of the optical module of the EC4B / EC8B card. Access method Right-click the EC4B / EC8B card in the object tree.8 data stream and connected with the PON port. users can execute this command to display the number of the PON port connected with this ONU and related information items of this ONU.4 GUI Reference of the EC4B / EC8B Card Parameter Name Parameter Description Property For various types of FiberHome EPON ONUs.3. this parameter refers to the type value. Version: A 4-21 .3. with the format MAC Address Read-only being XX-XX-XX-XX-XX-XX. Parameter Parameter Name Parameter Description Property PON No. under this condition. this parameter value will be Read-only displayed as Others.7 Viewing PON Port MAC Address Table Command function The viewing PON port MAC address table command is used to view the MAC address and VLAN ID value of the ONU connected with the appointed PON port of the EC4B / EC8B card. Read-only The MAC address of the ONU being passed through by service data stream and connected with the PON port. 4. The VLAN ID value of the ONU being passed through by service VLAN ID 4. The PON port number of the EC4B / EC8B card. The (dBm) unit is dBm. the value range is 1 to PON Port No. The unit is mA. The unit is dBm. and select Get Information Opt Module Para Information in the shortcut menu. Bias Current The current bias current of the (mA) optical module. Optical Module Type (km) Its value includes 10 and 20 (unit: km). The PON port number of the 4. The unit is ℃. Value Range / Requirement — Property Read-only Configuration Method — For the EC4B card. Parameter Parameter Name OLT No. For the EC8B card. Receive The current OLT Rx optical OptPower power from the ONU side. Compulsory type the ONU authorization number. Voltage (V) The current voltage of the optical module. Temperature The current temperature of the (℃) optical module. Tx-Power (dBm) The current Tx optical power of the optical module. The type of the optical module. The value range is 1 to 64. indicating the optical — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — fiber transmission distance from the OLT to the ONU. the value range is 1 to 8. 4-22 — Read-only — Version: A . Parameter Description The slot number of the EC4B / EC8B card. EC4B / EC8B card. Double-click to ONU No. The unit is V. The ONU authorization number. Double-click to Compulsory type the PON port number.AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Right-click the EC4B / EC8B card in the object tree. and includes the following sections.5 GUI Reference of the GC4B / GC8B Card This chapter discusses operation commands of the AN5516-06 GC4B / GC8B card in detail. Configuration command Control command Get information command Version: A 5-1 . 1 Configuration Command 5. PON Port The PON port number of the GC4B / No.AN5516-06 Optical Line Terminal Equipment GUI Reference 5. GC8B card.1.2 Value Range / Double-click to 160000 to 1250000. The unit is kbit/s. and the default value is 125000.1 Configuring Bandwidth Command function The configuring bandwidth command is used to configure or view the uplink / downlink bandwidth of each PON port of the GC4B / GC8B card. Requirement Property upstream The maximum uplink bandwidth of the bandwidth PON port. Parameter Description The slot number of the GC4B / GC8B card. Direction The signal uplink direction of the PON port. Parameter Parameter Name Slot No.1. Configuring QinQ Command function The configuring QinQ command is used to configure the TPID (Tag Protocol Identifier) value of the QinQ VLAN on the GC4B / GC8B card. (kbit/s) Configuration Method — Read-only — — Read-only — — Read-only — The value range is Total 5. 5-2 Version: A . Compulsory type the maximum uplink bandwidth of the PON port. and select Config  Bandwidth in the shortcut menu. Access method Right-click the GC4B / GC8B card in the object tree. 3 VLAN. and CPU/ memory utilization ratio. Parameter Parameter Name Parameter Description The slot number of the GC4B / Slot No. The TPID value of the QinQ Tpid 5. GC8B card. Access method Right-click the GC4B / GC8B card in the object tree.5 GUI Reference of the GC4B / GC8B Card Access method Right-click the GC4B / GC8B card in the object tree. Version: A 5-3 . and the default Compulsory value is 33024. and select Config  QinQ config in the shortcut menu.1. and select Config  Statistics Switch in the shortcut menu. Enabling / Disabling Performance Classification Command function The performance classification enabling / disabling command is used to enable / disable classification function of the appointed performance parameters of the GC4B / GC8B card. These performance parameters include PON port performance statistics data. Value Range / Requirement — Property Read-only The value range is 1 to 65534. optical module parameters. and select Config  Enable / Disable PON in the shortcut menu.1. Access method Right-click the GC4B / GC8B card in the object tree. and CPU/ memory utilization ratio.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description The slot number of the GC4B / Slot No. 5-4 Version: A . parameters. After a certain port is disabled. Click the Enables / disables Switch classification function of the Its value includes appointed performance Enable and Disable. Its value corresponds to three performance statistics categories: PON port Perf Code performance statistics data. this port will stop transmitting optical signals. Command function The enabling / disabling PON port command is used to enable or disable a certain PON port. and all ONUs connected with this PON port will enter unregistered status.4 Compulsory drop-down list to select the value. Enabling / Disabling a PON Port Caution: This command can interrupt services on the PON port. 5. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — The performance statistics category of the GC4B / GC8B card. Please do not execute this command randomly. GC8B card. optical module parameters. Enable and Disable. appointed PON port. GC8B card. Enable and Disable indicates enabling the Disable. Parameter Description The slot number of the GC4B / GC8B card. and select Config  Isolate PON Port in the shortcut menu. Version: A 5-5 . value is Disable.1. Value Range / Requirement — Property Read-only Configuration Method — Enable indicates setting isolation State between services at the Its value includes appointed PON port. The default appointed PON port. This function can be used to suppress broadcast storm inside the card.5 Configuration Click the drop-down Compulsory list to select the value. Access method Right-click the GC4B / GC8B card in the object tree.5 GUI Reference of the GC4B / GC8B Card Parameter Parameter Parameter Description Value Range / Name Property Requirement The slot number of the GC4B / Slot No. GC4B / GC8B card. The PON port number of the PON No. Parameter Parameter Name Slot No. 5. Configuring PON Port Isolation Command function The PON port isolation is described as follows: The four / eight PON ports in the same GC4B / GC8B card cannot communicate with each other unless they are connected with external equipment. Disable/Enable Method — Read-only — — Read-only — Enable indicates disabling the Its value includes appointed PON port. Compulsory Click the drop-down list to select the value. Disable indicates canceling The default value is isolation between services at the Enable. Access method Right-click the GC4B / GC8B card in the object tree.1. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — — Read-only — Its value includes Enable and Disable. PON Port Direction Enable/Disable 5-6 Parameter Description The slot number of the GC4B / GC8B card. Version: A . and select Config  PON FEC in the shortcut menu. Compulsory Click the drop-down list to select the value. After the FEC function of a PON port is enabled. Command function Configures or views the FEC function of each PON port of the GC4B / GC8B card FEC (Forward Error Correction): Before the signal is transmitted. at the receiving end. its FEC function in the uplink and downlink directions must be configured as the same enabling / disabling status. Enables / disables the FEC function in the uplink or downlink direction of the signal in the PON port. the ONUs connected with this PON port will first enter unregistered status. The default value is Disable. The PON port number of the GC4B / GC8B card. The uplink or downlink direction of the signal in the PON port.AN5516-06 Optical Line Terminal Equipment GUI Reference 5. the system performs decoding according to the same algorithm mentioned previously. The purpose is to discover errors and correct them. the system performs encoding of the signal according to a certain algorithm. This process can cause interruption of subscriber services. and inserts the redundancy information into the signal.6 Enabling / Disabling FEC Function of a PON Port Caution: For the same PON port. Parameter Parameter Name Slot No. and then register to the GC4B / GC8B card again. 7 Configuring PON Port Key Modification Interval Command function The service data stream passing through the appointed PON port of the GC4B / GC8B card is encrypted. and select Config  Secret Update Interval in the shortcut menu. Access method Right-click the GC4B / GC8B card in the object tree. users need to complete the related operations of GPON OLT VLAN operation tables.1. Compulsory Double-click to type the parameter value. [10. Parameter Parameter Name Slot No. The unit: second.8 Value Range / Requirement Property Configuration Method — Read-only — — Read-only — The value range is 0. 5. and users need to modify the key value regularly.4294967294]. Access method Version: A 5-7 . The PON port number of the GC4B / GC8B card. Binding / Unbinding a PON Port with a VLAN Operation Table Command function The binding / unbinding-PON-port-with-VLAN-operation-table command is used to configure and view the status of a GC4B / GC8B PON port binding with an OLT VLAN operation table. The time interval to modify the key value of service data stream passing through the appointed PON port.1.5 GUI Reference of the GC4B / GC8B Card 5. PON Port Secret Update Interval (Sec) Parameter Description The slot number of the GC4B / GC8B card. Before performing this configuration command. AN5516-06 Optical Line Terminal Equipment GUI Reference Right-click the GC4B / GC8B card in the object tree. and select Config  Packet Rate Control in the shortcut menu. One PON port can be bound with multiple OLT QinQ domains at the same time. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — attach means binding the Action services of the PON port with an Its values include OLT QinQ domain. attach and detach. Suppressing Broadcast / Multicast / Unknown Packet of a PON Port Command function The PON port broadcast / multicast / unknown packet suppression command is used to configure and view broadcast / multicast / unknown packet suppression function of a PON port. Click the Compulsory drop-down list to select the value. 5. Access method Right-click the GC4B / GC8B card in the object tree. Its purpose is to prevent generation of broadcast storm inside the system and improve the system performance. The name of the OLT QinQ Table Name domain. Parameter Parameter Name Slot No. The PON port number of the GC4B / GC8B card. and select Config  PON attach/detach VLAN Table in the shortcut menu.1.9 Click the — Compulsory drop-down list to select the value. OLT QinQ domain. detach means unbinding the The default value is services of the PON port with an attach. Parameter 5-8 Version: A . PON Port Parameter Description The slot number of the GC4B / GC8B card. Keep-alive Enable indicates enabling the Its values include packet suppression function. speed control is 1 to 262142. The PON port number of the GC4B / GC8B card. The default packet suppression function. value is 150. The value range of Speed (Packet/second) The system will discard the packets exceeding the set speed control threshold. The default Double-click to Compulsory type the parameter value. PON Port No. Enable and Disable indicates disabling the Disable. Version: A 5-9 . multicast packet. Parameter Description The slot number of the GC4B / GC8B card. with the unit being packet/ second. value is Enable.5 GUI Reference of the GC4B / GC8B Card Parameter Name Slot No. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — — Read-only — The packet type of the appointed Packet Type PON port. Click the Compulsory drop-down list to select the value. The type includes broadcast packet. and unknown packet. 2.AN5516-06 Optical Line Terminal Equipment GUI Reference 5. After an ONU is restarted. it will register to the OLT again. Parameter Description The slot number of the GC4B / GC8B card. Access method Right-click the GC4B / GC8B card in the object tree. 5. Parameter Parameter Name Slot No. 5-10 Version: A . and select Control Command  Reset ONU in the shortcut menu.2 Value Range / Requirement — Property Read-only Configuration Method — Resetting an ONU Command function The resetting ONU command is used to restart the appointed ONU.1 Resetting Command function The resetting command is used to reset the GC4B / GC8B card.2.2 Control Command 5. Access method Right-click the GC4B / GC8B card in the object tree. and select Control Command  Reset in the shortcut menu. The value range is 1 to 64. value range is 1 to 8. Double-click to Onu No. and select Control Command  Deauthorize ONU in the shortcut menu. Compulsory type the ONU authorization number.3 Deauthorizing an ONU Command function The deauthorizing ONU command is used to deauthorize the appointed ONU. The ONU authorization number. the Configuration Method — Double-click to Compulsory type the PON port number. Parameter Description The slot number of the GC4B / GC8B card. Value Range / Requirement — Property Read-only The PON port number of the value range is 1 to 4. Parameter Description The slot number of the GC4B / GC8B card. the PON Port The PON port number of the value range is 1 to 4. Parameter Parameter Name Slot No. Double-click to Onu No. Version: A 5-11 . The value range is 1 to 64.5 GUI Reference of the GC4B / GC8B Card Parameter Parameter Name Slot No. value range is 1 to 8. GC4B / GC8B card. the PON Port Configuration Compulsory drop-down list to select the PON port number. GC4B / GC8B card. 5.2. For the GC8B card. The ONU authorization number. Value Range / Requirement — Property Read-only For the GC4B card. Compulsory type the ONU authorization number. For the GC8B card. the Method — Click the For the GC4B card. No. No. Access method Right-click the GC4B / GC8B card in the object tree. The ONU authorization number. users can execute this command to analyze related problems.3.1 Viewing ONU Type and Version Number Command function The viewing ONU type and version number command is used to view the types and software / hardware version numbers of all registered ONUs connected with the GC4B / GC8B card. The software version number of the ONU.3 Get Information Command 5. so as to help troubleshoot faults or applying the new software to the hardware. The ONU type configured in the ANM2000. The PON port number of the GC4B / GC8B card. The actual hardware type of the ONU. Configured Type Actual Type Software Version Hardware Version 5-12 Parameter Description The slot number of the GC4B / GC8B card. When an ONU is faulty or its software is upgraded. PON Port No.AN5516-06 Optical Line Terminal Equipment GUI Reference 5. Access method Right-click the GC4B / GC8B card in the object tree. ONU No. Parameter Parameter Name Slot No. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — Version: A . The hardware number of the ONU. and select Get Information  ONU Information in the shortcut menu. ONU Type Various types of FiberHome ONUs and Others. LogicSN: This parameter is only valid for the Password EPON equipment.5 GUI Reference of the GC4B / GC8B Card 5. Version: A 5-13 . PHISIC-ID Authentication. Access method Right-click the GC4B / GC8B card in the object tree. PHISIC-ID+Password Authentication.2 Viewing ONU Authorization List Command function The viewing ONU authorization list command is used to view information of authorized ONUs connected with the appointed PON port of the GC4B / GC8B card. Its value includes: NO Authentication Mode Authentication. The PON port number of the GC4B / GC8B card. The authorized ONUs include all online and offline ONUs. and select Get Information  ONU Authcated Table in the shortcut menu. The ONU authorization number. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — The MAC address of the ONU. Parameter Parameter Name Slot No. Parameter Description The slot number of the GC4B / GC8B card. PON No. The authentication mode of the ONU. Password LogicSN: LOID The password of the ONU. This parameter is only valid for the EPON equipment.3. Password Authentication. ONU No. with Physical SN the format being XX-XX-XX-XX-XX-XX. 3 Viewing Unauthorized ONU List Command function The viewing unauthorized ONU list command is used to view information of unauthorized ONUs connected with the appointed PON port of the GC4B / GC8B card. LogicSN: This parameter is only valid for the Password EPON equipment. Its Status value includes Authcated. 5-14 Version: A . Parameter Description The slot number of the GC4B / GC8B card.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The current status of the ONU. The unauthorized ONUs here include all online ONUs. and Reserve. The PON port number of the GC4B / GC8B card. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — The MAC address of the ONU.3. 5. Access method Right-click the GC4B / GC8B card in the object tree. with Physical SN the format being XX-XX-XX-XX-XX-XX. Password LogicSN: LOID The password of the ONU. PON No. — Read-only — Pre-Authcated. Parameter Parameter Name Slot No. and select Get Information  ONU Unauthorized Table in the shortcut menu. This parameter is only valid for the EPON equipment. 3. Read-only PON No. Version: A 5-15 .5 Viewing Unregistered ONU List Command function The viewing unregistered ONU list command is used to view information of unregistered ONUs connected with the appointed PON port of the GC4B / GC8B card. and select Get Information  Registered ONU List in the shortcut menu. with the format being XX-XX-XX-XX-XX-XX. The PON port number of the GC4B / GC8B card. Read-only LogicSN: LOID This parameter is only valid for the EPON equipment. Read-only Password The password of the ONU. The slot number of the GC4B / GC8B card. Read-only This parameter is only valid for the EPON equipment.4 Viewing Registered ONU List Command function The viewing registered ONU list command is used to view information of authorized and online ONUs connected with the appointed PON port of the GC4B / GC8B card. Access method Right-click the GC4B / GC8B card in the object tree.3. Parameter Parameter Name Parameter Description Property Slot No. Read-only LogicSN: Password ONU Type 5.5 GUI Reference of the GC4B / GC8B Card 5. Read-only ONU No. Read-only Physical SN The MAC address of the ONU. Read-only Various types of FiberHome ONUs and Others. The ONU authorization number. The parameters to be viewed include statistics on the transmitted frame. this parameter value will be displayed as Others. 5-16 Version: A . Read-only Password The password of the ONU. Read-only PON No. Read-only ONU No. and the delay. Read-only LogicSN: Password For various types of FiberHome EPON ONUs. Read-only This parameter is only valid for the EPON equipment. the received frame. The slot number of the GC4B / GC8B card. Parameter Parameter Name Parameter Description Property Slot No. 5. The PON port number of the GC4B / GC8B card. The ONU authorization number. for ONUs of other Read-only vendors. Read-only Physical SN The MAC address of the ONU.6 Viewing Port Loopback Status Command function The viewing port loopback command is used to view the OAM loopback test function on a PON port of the line interface card. with the format being XX-XX-XX-XX-XX-XX.AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Right-click the GC4B / GC8B card in the object tree.3. and select Get Information  Port loopback in the shortcut menu. Access method Right-click the GC4B / GC8B card in the object tree. and select Get Information  No-Registered ONU List in the shortcut menu. Read-only LogicSN: LOID This parameter is only valid for the EPON equipment. such as AN5006-04. this parameter ONU Type refers to the type value. this parameter ONU type refers to the type value. Value Range / Requirement — Property Read-only The value PON No. Send Frame Configuration — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — The minimum delay from transmitting a packet to receiving it in the port loopback test. Version: A 5-17 . The number of received correct frames in the port loopback test. Method — Double-click to Compulsory type the PON port number. such as AN5006-04. card type. for ONUs of other vendors. The number of received error frames in the port loopback test. For various types of FiberHome EPON ONUs. The maximum delay from transmitting a packet to receiving it in the port loopback test. this parameter value will be displayed as Others. line interface Frame Received OK Frame Received Corrupted Min Delay (us) Max Delay (us) Avg Delay (us) The number of transmitted frames in the port loopback test. The average delay from transmitting a packet to receiving it in the port loopback test. The PON port number of the depends on the GC4B / GC8B card.5 GUI Reference of the GC4B / GC8B Card Parameter Parameter Name Slot No. Parameter Description The slot number of the GC4B / GC8B card. Parameter Parameter Name Parameter Description Property PON No. 5-18 Version: A . with Read-only the format being XX-XX-XX-XX-XX-XX.3. The PON port number of the GC4B / GC8B card. VLAN ID 5. Read-only The MAC address of the ONU being passed through by MAC Address service data stream and connected with the PON port.8 The VLAN ID value of the ONU being passed through by service data stream and connected with the PON port.3. and select Get Information  MAC Learning Table on PON in the shortcut menu.AN5516-06 Optical Line Terminal Equipment GUI Reference 5. users can execute this command to display the number of the PON port connected with this ONU and related information items of this ONU. Read-only Viewing Optical Module Parameters Command function The viewing optical module parameters command is used to view the parameters of the optical module of the GC4B / GC8B card. The prerequisite is that service data stream is passing through an ONU. and select Get Information Opt Module Para Information in the shortcut menu. Access method Right-click the GC4B / GC8B card in the object tree. Access method Right-click the GC4B / GC8B card in the object tree.7 Viewing PON Port MAC Address Table Command function The viewing PON port MAC address table command is used to view the MAC address and VLAN ID value of the ONU connected with the appointed PON port of the GC4B / GC8B card. under this condition. For the GC8B card. The PON port number of the 4. Optical Module Type (km) Its value includes 10 and 20 (unit: km). Version: A — Read-only — 5-19 . Value Range / Requirement — Property Read-only Configuration Method — For the GC4B card. The unit is mA. Compulsory type the ONU authorization number. Parameter Description The slot number of the GC4B / GC8B card. GC4B / GC8B card. The unit is dBm. Tx-Power (dBm) The current Tx optical power of the optical module. The unit is ℃.5 GUI Reference of the GC4B / GC8B Card Parameter Parameter Name OLT No. Receive The current OLT Rx optical OptPower power from the ONU side. The value range is 1 to 64. Voltage (V) The current voltage of the optical module. The (dBm) unit is dBm. Bias Current The current bias current of the (mA) optical module. the value range is 1 to PON Port No. The unit is V. indicating the optical — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — fiber transmission distance from the OLT to the ONU. Double-click to ONU No. the value range is 1 to 8. Double-click to Compulsory type the PON port number. The ONU authorization number. Temperature The current temperature of the (℃) optical module. The type of the optical module. . Configuring uplink port properties Configuring port performance thresholds Configuring port RSTP Enabling / disabling performance classification Enabling / disabling VLAN performance statistics Resetting a card Viewing optical module parameters Version: A 6-1 .6 GUI Reference of the HU1A / HU2A / GU6F Card This chapter discusses operation commands of the AN5516-06 HU1A / HU2A / GU6F card in detail. and includes the following sections. flow control.AN5516-06 Optical Line Terminal Equipment GUI Reference 6. To configure other parameters in the Uplink Port Enable Enables / disables the Properties window (except for Config uplink port. Users can select to enable / disable the port. 6-2 Version: A . other parameters cannot be configured. To enable the auto-negotiation function of the uplink port on an uplink card. The type of the uplink port. and select Config  Uplink Port Properties in the shortcut menu. users must enable the uplink port. WAN/LAN Mode). disabled. Its value depends on the uplink card type. Port Type including Gb electrical port. The main parameters to be configured include Ethernet parameters. and priority authority.1 Configuring Uplink Port Properties Command function The uplink port properties configuration command is used to configure the related properties of the uplink port on an uplink card. Parameter Parameter Name Parameter Description Configuration Value Range / Requirement Property — Read-only — — Read-only — — Read-only — Method The slot number of the Slot No. if the port is Users can Optional select or clear this check box. List of the uplink ports. uplink card. Access method Right-click the HU1A / HU2A / GU6F card in the object tree. Uplink Port No. and 10 Gb optical port. Its value can be 19 or 20. users need to enable the auto-negotiation function of the Rx port on the uplink equipment under the OLT first. Gb optical port. Optional When the auto-negotiation drop-down list to select the value. should enable the flow control function. this parameter is read-only. When the auto-negotiation function is disabled. To perform Control congestion control. 6-3 . When the auto-negotiation Click the Compulsory drop-down list to select the value. the uplink port can negotiate with ports of other Auto Negotiation equipment sets on the maximum allowed transmission rate. this parameter is read-only. users Users can — Optional select or clear this check box. Click the can be set to Half-Duplex or Full-Duplex. this parameter is read-only. MAC Address Learning Priority Enable Version: A Enables or disables the service packet MAC address learning function Users can — Optional this check box. function is enabled. of the uplink port. and optical ports do not support this function.6 Parameter Name Parameter Description GUI Reference of the HU1A / HU2A / GU6F Card Value Range / Requirement Property Configuration Method When the auto-negotiation function is enabled. function is enabled. Click the can be set to 10Mbps. Users can Enables or disables the priority authority function of the uplink port. When the auto-negotiation function is disabled. Optional When the auto-negotiation drop-down list to select the value. this parameter can be set to Enable or Disable. When the auto-negotiation function is disabled. this parameter Speed Selects the operating rate Config of the uplink port. Only electrical ports support the auto-negotiation function. Enables or disables the flow control function of the Flow uplink port. 100Mbps or 1000Mbps. select or clear — Optional select or clear this check box. this parameter Duplex Configures the operating Config mode of the uplink port. function is enabled. It can be set to WAN or LAN. users should select SGMIII. parameter is invalid. this Click the drop-down list to select the value. This parameter is only valid for the 10 Gb optical port. and Interface Configures the interface Mode mode of the uplink port. parameter is If the port acts as an optical port. For other If the port acts as an electrical uplink ports. users should select SerDes. The value Configuration Optional range is 0 to 7. this parameter should be set to LAN. drop-down list to select the value. and the value is always SerDes. type the priority level of the uplink port. It has two values: SerDes and 20:4. For the uplink ports 19:3. port. Click the connected with the WAN equipment (such as SDH). this parameter is valid. When the 10 Gb optical port is connected with the LAN equipment (such as Ethernet). valid. this Optional parameter should be set to WAN.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Priority Sets the priority level of the Value uplink port. 19:4. 6-4 Version: A . Value Range / Requirement Property Method Double-click to When Priority Enable is selected. this SGMIII. 20:3. When the 10 Gb optical port is WAN/LAN Configures the WAN / LAN Mode mode of the 10 Gb port. Version: A 6-5 . The main performance parameters to be configured include CRC statistical value. Note: When the actual values of CRC statistical value. and the meaning that the packets exceeding the set threshold threshold is not set. the ANM2000 will report corresponding alarms via prompt information. will be discarded. and uplink / downlink rate of the uplink card exceed the set alarm thresholds. quantity of undersized packets. port performance statistics. quantity of undersized packets. The corresponding alarm will appear in the default value is 0.6 6.2 GUI Reference of the HU1A / HU2A / GU6F Card Configuring Port Performance Thresholds Command function The port performance thresholds configuration command is used to configure the performance-related alarm thresholds of the uplink port on an uplink card. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — When the CRC statistical value of the Crc-Threshold (/sec) received packets by the uplink port The value range is 0 exceeds the set threshold. a to 4294967294. Double-click to Optional type the parameter value. Its value can be 19 or 20. Parameter Description The slot number of the uplink card. and select Config  Uplink Port Statistics Threshold in the shortcut menu. Parameter Parameter Name Slot No. List of the uplink ports. Access method Right-click the HU1A / HU2A / GU6F card in the object tree. and uplink / downlink rate. Its value depends on the uplink card type. Uplink No. The uplink port exceeds the set threshold. a corresponding alarm will appear in meaning that the the port performance statistics. Double-click to Optional type the parameter value. default value is 0.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method A packet whose byte number is less than 60 is called the undersized UndersizeFrame Threshold (/sec) packet. and threshold is not set. 6-6 Version: A . When the undersized packet The value range is 0 number of the received packets by the to 4294967294. the packets exceeding the set threshold will be discarded. Access method Right-click the HU1A / HU2A / GU6F card in the object tree. Its value depends on the uplink card type. 1. Parameter Parameter Parameter Description Name Slot No. The slot number of the uplink card.3. A port with a higher Priority priority is preferred to act as the root port. To execute this command. It is valid only when the RSTP function of an uplink port is enabled. A port with a The value range is smaller path cost value has a lower 1 to 200000000.3. Uplink No. and select Config  Uplink Port RSTP in the shortcut menu. The port RSTP path cost. Version: A 6-7 . path cost. Rstp Port a higher priority.6 GUI Reference of the HU1A / HU2A / GU6F Card 6.2 Property Requirement A port with a smaller priority value has Port Path Cost Value Range / Configuration Method — Read-only — — Read-only — Double-click to The value range is 0 to 240.3 Configuring Port RSTP 6.1 Configuring Port RSTP Parameters Command function The port RSTP parameters configuration command is used to set the RSTP priority parameters. 6. A path with a lower cost is The default value is preferred to act as the root path. List of the uplink ports. Viewing RSTP Bridge Information Command function The viewing RSTP bridge information command is used to display the RSTP bridge information of the uplink card and monitor the status of each bridge. The Optional default value is 0. Its value can be 19 or 20. users should enable the RSTP function of the ONU. type the parameter value. Double-click to Optional type the parameter value. this MAC address will be deleted after the maximum aging time. The root bridge can be either the uplink card bridge or the OLT uplink equipment bridge. and select Get Information  RSTP Bridge Info in the shortcut menu. It is an important part of the bridge ID. The MAC address of the root bridge selected according to the Root Bridge Mac bridge ID. After the uplink port has learned a certain MAC Bridge Max Age address.AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Right-click the HU1A / HU2A / GU6F card in the object tree. It is an important part of the bridge ID. Bridge Hello Time The time interval to send the BPDU. Its value includes STP and RSTP. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The maximum aging time of the uplink card bridge. if it does not receive packets including this MAC — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — address during the aging time. The MAC address of the uplink Bridge Mac Address card bridge. Force Version The version of the RSTP protocol. The priority of the root bridge selected according to the bridge Root Bridge Priority ID. 6-8 Version: A . A bridge with a smaller priority value has a higher priority. The priority value of the uplink card Bridge Priority bridge. The root bridge can be either the uplink card bridge or the OLT uplink equipment bridge. The delay of a port entering Forward Delay forward status from blocked or learning status. The time interval of port status conversion when the root bridge is selected. GUI Reference of the HU1A / HU2A / GU6F Card Value Range / Requirement Property Configuration Method — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — The maximum aging time of the root bridge. if it does not receive Root Max Age packets including this MAC address during the aging time.3. Version: A 6-9 . Its purpose is to prohibit Root Forward Delay the bridge from sending / receiving data before the topology architecture modification message is sent to the entire network. The cost of the path from the To Root Path Cost 6. Viewing RSTP Port Information Command function The viewing RSTP port information command is used to view the RSTP information of the appointed uplink card.6 Parameter Name Parameter Description The root port number of the root Root Port bridge.3 bridge to the root bridge. Access method Right-click the HU1A / HU2A / GU6F card in the object tree. After the root bridge has learned a certain MAC address. and select Get Information  RSTP Port Info in the shortcut menu. this MAC address will be deleted after the maximum aging time. The time interval for the root bridge Root Hello Time to send the BPDU packet. The priority of the port when the RSTP Port Priority is enabled.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Slot No. Its value can be 19 or 20. Designated The path cost of the appointed root Path Cost port. type. Version: A . A port with a smaller priority value is preferred to act as the root — Read-only — port. Parameter Description The slot number of the uplink card. — Read-only — The priority of the appointed bridge. — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — The priority of the appointed port. Port Role — — Read-only — Port State The operating mode of the port. Configuration Compulsory drop-down list to select the value. The priority of the appointed root port. Value Range / Requirement — Property Read-only The number of the uplink port. Designated Port Priority Designated Bridge Priority Designated Bridge Mac Address 6-10 The number of the appointed port. The MAC address of the appointed root port. Designated Port No. It depends on the port number of the opposite end equipment. The MAC address of the appointed bridge. — Read-only — — Read-only — Port Path Cost Designated Root Priority Designated Root Mac Address The path cost of the port when the RSTP is enabled. depends on the uplink card Method — Click the Its value Uplink No. and select Config  Performance Sort Switch in the shortcut menu.4 Enabling / GUI Reference of the HU1A / HU2A / GU6F Card Disabling Performance Classification Command function After the performance classification function is enabled via this command. Access method Right-click the HU1A / HU2A / GU6F card in the object tree. Value Range / Requirement Property Read-only — — Read-only — Enables / disables the classification includes function. Enable and Disable. users can select HU1A / HU2A / GU6F → Realtime Performance → Uplink Port Statistics to view the performance statistical value of the uplink port. The performance statistics switch. Version: A Method — Its value Switch Configuration Click the Compulsory drop-down list to select the value. Perf Code Parameter Description The slot number of the HU1A / HU2A / GU6F card. 6-11 . Parameter Parameter Name Slot No.6 6. AN5516-06 Optical Line Terminal Equipment GUI Reference 6. Version: A . Port no VLAN ID Parameter Description The slot number of the uplink card. After the VLAN performance statistics function is enabled. Enables / disables the VLAN Switch performance statistics function of the uplink port. Its value depends on the uplink card type. and select Config  VLAN Performance Switch in the shortcut menu. Parameter Parameter Name Slot No. Access method Right-click the HU1A / HU2A / GU6F card in the object tree. users can select HU1A / HU2A / GU6F → Realtime Performance to view the bandwidth utilization ratio of an uplink port in a certain VLAN.5 Enabling / Disabling VLAN Performance Statistics Command function The enabling / disabling VLAN performance statistics command is used to enable / disable the VLAN performance statistics function of an uplink port. 6-12 Value Range / Requirement Property Configuration Method — Read-only — — Read-only — The value range is 1 to Double-click to Compulsory type the VLAN 4085. Its value Click the includes Enable and Disable. List of the uplink ports. The value can be 19 and 20. ID. The VLAN ID of a certain VLAN containing the port. Compulsory drop-down list to select the value. This command is generally used in fault handling. The value can be 19 and 20. Value Range / Requirement — Property Read-only Configuration Method — 6-13 . and select Control Command  Reset in the shortcut menu. Please do not execute this command randomly.6 6. Access method Right-click the HU1A / HU2A / GU6F card in the object tree. Parameter Parameter Name Slot No. users can try to reset it.6 GUI Reference of the HU1A / HU2A / GU6F Card Resetting a Card Command function When the uplink card works abnormally. Version: A Parameter Description The slot number of the uplink card. Caution: This resetting card command can interrupt services. AN5516-06 Optical Line Terminal Equipment GUI Reference 6.7 Viewing Optical Module Parameters Command function The viewing optical module parameters command is used to view the parameters of the optical module of the HU1A / HU2A / GU6F card. Access method Right-click the HU1A / HU2A / GU6F card in the object tree, and select Get Information  Opt Module Para Information in the shortcut menu. Parameter Parameter Name Slot No. Port No. Parameter Description The slot number of the HU1A / HU2A / GU6F card. The optical port number of the HU1A / HU2A / GU6F card. Value Range / Requirement — Property Read-only The HU1A card: 1 to 5. The HU2A card: 1 to 4. Configuration Method — Double-click to Compulsory The GU6F card: 1 to 6. type the PON port number. The type of the optical module. Optical Module Type (km) Its value includes 10 and 20 (unit: km), indicating the optical — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — fiber transmission distance from the OLT to the ONU. Temperature The current temperature of the (℃) optical module. The unit is ℃. Voltage (V) The current voltage of the optical module. The unit is V. Bias Current The current bias current of the (mA) optical module. The unit is mA. Tx-Power (dBm) The current Tx optical power of the optical module. The unit is dBm. Receive The current Rx optical power of OptPower the optical module. The unit is (dBm) dBm. 6-14 Version: A 7 GUI Reference of the CE1B / C155A Card This chapter discusses operation commands of the AN5516-06 CE1B / C155A card in detail, and includes the following sections. Configuring clock Performing loopback Enabling / disabling performance classification Viewing E1 status Resetting Version: A 7-1 AN5516-06 Optical Line Terminal Equipment GUI Reference 7.1 Configuring Clock 7.1.1 Configuring System Clock Mode Command function Configures the clock acquisition mode of the local AN5516-06. The five clock acquisition modes are described as follows:  internal: The clock is provided by the internal oscillator of the card.  Exterior 1: The clock is received via the external clock interface on the front panel of the card.  Exterior 2: The current CE1B card uses the clock of another CE1B / C155A / TIMA card via the backplane. If the equipment is configured with two CE1B / C155A / TIMA cards, and one card has obtained the system clock in other modes, the other card can implement clock synchronization via selecting Exterior 2.  E1-Pick: The clock is extracted from the E1 line whose serial number is 1.  OptLine-Pick: The clock is extracted from the optical port link. According to the selected clock acquisition mode, users need to complete the corresponding physical connection.  If Exterior 1 is selected, users need to complete accessing of the clock from the external clock interface on the front panel of the card.  If Exterior 2 is selected, users need to ensure that another CE1B / C155A / TIMA card has obtained the clock.  If E1-Pick is selected, users need to complete phyical connection of the E1 line whose serial number is 1. 7-2 Version: A 7 GUI Reference of the CE1B / C155A Card Access method Right-click the CE1B / C155A card in the object tree, and select Config  System Clock Mode in the shortcut menu. Parameter Parameter Name Slot No. Parameter Description The slot number of the CE1B / C155A card. Value Range / Requirement Property — Read-only Configuration Method — The CE1B card has four modes: Click the Clock internal, Exterior 1, Exterior 2, Clock Source The clock acquisition and E1-Pick. mode. The C155A card has five modes: internal, Exterior 1, Exterior 2, Compulsory Source list box to select the value. E1-Pick, and OptLine-Pick. 7.1.2 Configuring Clock Recovery Mode Command function The TDM service between the local AN5516-06 and the AN5006-06A-A is not implemented via the physical E1 cable, but is implemented in circuit emulation mode; in circuit emulation mode, the TDM traffic is encapsulated into Ethernet packets for transmission in the optical fiber. When the uplink Ethernet packets from the ONU reach the OLT, the OLT will convert the Ethernet packets into the TDM traffic, and at the same time recover the TDM service clock and transmit it to the uplink equipment. The system supports four clock recovery modes:  Adaptive clock recovery The ONU and the OLT do not share the same synchronization reference source. The TDM service from the ONU is encapsulated into Ethernet packets and then transmitted to the OLT, and the OLT recovers the clock according to the Ethernet packet arrival rate and occupying condition of the packet buffer area. Version: A 7-3 AN5516-06 Optical Line Terminal Equipment GUI Reference  Enhanced adaptive clock recovery Its principles are the same as those of the adaptive clock recovery. But the sampling frequency of enhanced adaptive clock recovery is higher than that of adaptive clock recovery, and the recovered clock is more accurate.  Differential clock recovery The ONU and the OLT share the same synchronization reference source. During the TDM service encapsulation process on the ONU, the system will compare the TDM service clock with the public synchronization reference source; the differential value will be encapsulated into the Ethernet packet together with the TDM service and then be sent to the OLT. After receiving the Ethernet packet, the OLT will decapsulate it and recover the clock differential value; after comparing the clock differential value with the public synchronization reference source, the OLT can determine the clock.  Loopback clock recovery The system uses the clock in the downlink TDM data from the uplink equipment as the transmitting clock directly. If it is needed to modify the clock recovery mode, users must first delete all E1 service configurations in the E1 port service configuration window of an ONU. Access method Right-click the CE1B / C155A card in the object tree, and select Config  Clock recovery Mode in the shortcut menu. 7-4 Version: A 7 GUI Reference of the CE1B / C155A Card Parameter Parameter Name Slot No. mode Version: A Parameter Description The slot number of the CE1B / C155A card. Value Range / Requirement — The mode of the CE1B / C155A card The parameter has recovering and extracting four values: corresponding clock signals from the adaptive recover, data from the ONU. differential When the CE1B / C155A card has recover, been configured with E1 services, the enhanced clock recovery mode cannot be recover, and modified. Users can modify the clock loopback recover. recovery mode only after all E1 The default value is service configurations are deleted. adaptive recover. Property Read-only Configuration Method — Click the mode Compulsory list box to select the value. 7-5 AN5516-06 Optical Line Terminal Equipment GUI Reference 7.2 Performing Loopback 7.2.1 Performing E1 Loopback of the C155A Card Command function When the TDM service is interrupted, users can use loopback method to check the physical connection of the E1 cable and the internal status of the C155A card, so as to analyze and isolate the fault.  Internal loopback: Is used to test whether the line from the ONU E1 interface to the mapping chip inside the C155A card is faulty.  External loopback: Is used to test whether the line from the E1 interface of the SDH equipment to the mapping chip inside the C155A card is faulty. Note: The C155A card provides one STM-1 interface, which is used to transmit the TDM service to the SDH equipment. After the Ethernet packet from the ONU side is converted into the TDM traffic, the C155A card will perform mapping, alignment, and multiplexing operations, so that 63 E1 signals will be multiplexed into the STM-1 frame and the transmission will be completed via the STM-1 interface. Access method Right-click the C155A card in the object tree, and select Config  E1 Loopback in the shortcut menu. Parameter Parameter Name Slot No. 7-6 Parameter Description The slot number of the C155A card. Value Range / Requirement Property — Read-only Configuration Method — Version: A 7 GUI Reference of the CE1B / C155A Card Parameter Name Parameter Description Value Range / Requirement Property — Read-only Configuration Method One C155A STM-1 optical interface can contain 63 E1 E1 No. signals, so the value of this — parameter should be 1 to 63. It has three values: DLB, LLB, and Cancel. State Is used to select the loopback mode. Click the State If Cancel is selected, the system will not perform loopback test of E1 Compulsory services, and the equipment will return to the normal operating list box to select the value. status. 7.2.2 Performing Optical Interface Loopback Command function When the TDM service is interrupted, users can use loopback method to check the physical connection of the E1 cable and the internal status of the C155A card, so as to analyze and isolate the fault.  Internal loopback: Is used to test whether the line from the ONU E1 interface to the STM-1 overhead and pointer processing chip inside the C155A card is faulty.  External loopback: Is used to test whether the line from the E1 interface of the SDH equipment to the STM-1 overhead and pointer processing chip inside the C155A card is faulty. Note: The C155A card provides one STM-1 interface, which is used to transmit the TDM service to the SDH equipment. After the Ethernet packet from the ONU side is converted into the TDM traffic, the C155A card will perform mapping, alignment, and multiplexing operations, so that 63 E1 signals will be multiplexed into the STM-1 frame and the transmission will be completed via the STM-1 interface. Version: A 7-7 AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Right-click the C155A card in the object tree, and select Config  Optical port loopback in the shortcut menu. Parameter Parameter Name Parameter Description The slot number of the Slot No. C155A card. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — The STM-1 optical interface number of the C155A card. The C155A Port No card has two optical interfaces, one of which is standby. It has three values: DLB, LLB, and Cancel. If Cancel is selected, the Is used to select the State loopback mode. Click the State system will not perform loopback test of E1 Compulsory services, and the equipment will return to list box to select the value. the normal operating status. 7.2.3 Performing E1 Loopback of the CE1B Card Command function When the TDM service is interrupted, users can use loopback method to check the physical connection of the E1 cable, so as to analyze and isolate the fault.  Internal loopback: Is used to test whether the line from the ONU E1 interface to the chip inside the CE1B card is faulty.  External loopback: Is used to test whether the line from the chip inside the CE1B card to the the E1 interface of the uplink eqiupment is faulty. 7-8 Version: A 7 GUI Reference of the CE1B / C155A Card Note: The CE1B card provides 32 E1 interfaces, which are used to transmit the TDM service to the upper level equipment. The Ethernet packet from the ONU side is converted into the TDM traffic via the chip inside the CE1B card, and the transmission is completed via the E1 interface. Access method Right-click the CE1B card in the object tree, and select Config  E1 Loopback in the shortcut menu. Parameter Parameter Name Slot No. Parameter Description The slot number of the CE1B card. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — The CE1B card has four dedicated sockets for E1 interfaces, and each socket E1 No. corresponds to eight E1 interfaces. So it supports 32 E1 interfaces, and the numbers are 1 to 32 respectively. Is used to select the loopback mode. It has three values: DLB, LLB, State and Cancel. If Cancel is selected, the equipment will return to the normal operating status. Version: A It has three values: DLB, LLB, and Cancel. Click the State If Cancel is selected, the system will not perform loopback test of E1 services, and the equipment Compulsory list box to select the value. will return to the normal operating status. 7-9 AN5516-06 Optical Line Terminal Equipment GUI Reference 7.3 Enabling / Disabling Performance Classification Command function After the performance classification function is enabled, users can select CE1B / C155A → Realtime Performance → CPU/Memory Proportion to view the CPU / memory utilization ratio of the CE1B / C155A card. When the actual CPU / memory utilization ratio of the CE1B / C155A card is higher than the set alarm threshold, the ANM2000 will give an alarm. Access method Right-click the CE1B / C155A card in the object tree, and select Config  Performance Sort Switch in the shortcut menu. Parameter Parameter Name Slot No. Parameter Description The slot number of the CE1B / C155A card. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — The performance statistics switch of the CPU / memory utilization ratio. Is Perf Code used to view the CPU / memory utilization ratio performance of the CE1B / C155A card. Its value Switch Enables / disables the classification includes function. Enable and Disable. 7-10 Click the Compulsory Switch list box to select the value. Version: A activate: This link has been created. The slot number of the CE1B / C155A card. activate: This link has been created. non-activate: This E1 link is not occupied.4 Viewing E1 Status Command function The viewing E1 status command is used to view the current status of the E1 link.7 GUI Reference of the CE1B / C155A Card 7. The Tx side status of the E1 link. and it works normally. Version: A 7-11 . range of 1 to 63. Read-only For the C155A card. non-activate: This E1 link is not occupied. and select Get Information  E1 State in the shortcut menu. and it works normally. but it does not work Read-only normally. Tx State activating: This link has been created. Parameter Parameter Name Parameter Description Property Slot No. The Rx side status of the E1 link. but it does not work Read-only normally. the value of this parameter should be in the E1 No. Access method Right-click the CE1B / C155A card in the object tree. For the CE1B card. the value of this parameter should be in the Read-only range of 1 to 32. Rx State activating: This link has been created. Value Range / Requirement — Property Read-only Configuration Method — Version: A . Access method Right-click the CE1B / C155A card in the object tree pane.5 Resetting Command function When the CE1B / C155A card works abnormally. users can try to reset it. Please do not execute this command randomly.AN5516-06 Optical Line Terminal Equipment GUI Reference 7. Parameter Parameter Name Slot No. Caution: The resetting command can interrupt TDM services. and select Control Command  reset in the shortcut menu. 7-12 Parameter Description The slot number of the CE1B / C155A card. This command is generally used in alarm or fault handling. 8 GUI Reference of the PUBA Card This chapter discusses operation commands of the AN5516-06 PUBA card in detail. Enabling / disabling performance classification Configuring alarms Version: A 8-1 . and includes the following sections. Its value Switch Enables / disables the classification includes function. and select Realtime Performance → CPU/Memory Proportion. When the environment monitoring function is enabled. For the PUBA card. 8-2 Click the Compulsory drop-down list to select the value.AN5516-06 Optical Line Terminal Equipment GUI Reference 8. the performance monitoring parameters include the environment monitoring performance and the CPU / memory utilization ratio performance. and select Config  Performance Sort Switch in the shortcut menu. the user defined environment monitoring alarms can be monitored via the ANM2000. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — The performance type. Enable and Disable.1 Enabling / Disabling Performance Classification Command function The enabling / disabling performance classification command is used to enable / disable the performance monitoring function of the PUBA card. Version: A . Access method Right-click the PUBA card in the object tree. Parameter Description The slot number of the PUBA card. Parameter Parameter Name Slot No. the CPU / memory utilization ratio of the PUBA card can be monitored via the ANM2000. Note: The access method to read the CPU / memory utilization ratio of the PUBA card is described as follows: Right-click the PUBA card. When the CPU / memory utilization ratio monitoring function is enabled. Its value Perf Code includes Environment Monitor and CPU/Memory Proportion. 8 GUI Reference of the PUBA Card 8. SMOKE. Alarm Compulsory drop-down list to select the value. FAN-TEMP-OVER. name User -defined-alarm-8 to User automatically. Its value includes User -defined-alarm-1 to User -defined-alarm-14.1 Managing User Defined Alarms Command function The user defined alarm management command is used to configure the user defined alarm names of 14 dry contacts. to 8 wires in ANM2000 will add Read-only — -defined-alarm-14 correspond to the dry contact alarms on the 2nd to 8th wires in the connection cables connected with interfaces DC8 to 14. 8-3 . the nd th Default contact alarms on the 2 Alarm Name the connection cables connected with a default alarm interfaces DC1 to 7. Version: A Click the FIRE-ALM. Includes English Name The actual name of the alarm. and TEMP-Down.2.2 Configuring Alarms 8. Access method Right-click the PUBA card in the object tree. Parameter Parameter Name Value Range / Parameter Description Requirement Property Configuration Method The default alarm name defined by the ANM2000. User -defined-alarm-1 to User When a new row is -defined-alarm-7 correspond to the dry added. and select Config  Custom Alarm Manage in the shortcut menu. serial number contact.2.AN5516-06 Optical Line Terminal Equipment GUI Reference 8. Compulsory drop-down list to select the value. correspond to the 2nd to 8th wires in the the blank area Compulsory Conditions 8-4 Click the The reporting alarm. interfaces DC8 to 14. The PUBA card supports alarms of 14 dry contacts. condition of the to type the of the dry connection cables connected with Alarm Method Double-click correspond to the 2nd to 8th wires in the The serial Configuration Includes low and high. Parameter Parameter Parameter Name Description Value Range / Requirement Property The value range is 1 to 14. Access method Right-click the PUBA card in the object tree pane. Version: A . and the report condition of each dry contact alarm can be set to low (meaning reporting on a low level) or high (meaning reporting on a high level).2 Configuring Report Conditions of User Defined Alarms Command function The user defined alarm report condition configuration command is used to configure the report conditions of user defined alarms of the PUBA card. This command can be used to configure alarms of multiple dry contacts. 1 to 7 Interface Number connection cables connected with number of the interfaces DC1 to 7. and 8 to 14 dry contact. and select Config  PUBA User Defined Alarm Config in the shortcut menu. and includes the following section.9 GUI Reference of the FAN Card This chapter discusses operation commands of the AN5516-06 FAN card in detail. Configuring fan parameters Version: A 9-1 . The default running. Via this configuration. Property Configuration Method Double-click the blank area Compulsory to type the parameter value. This command is valid for all FAN cards of the equipment at the same time. Its value includes Start Speed The start rotating speed when the fan starts running. value is 10. Temperature Step Its meaning is described as follows: When the temperature increases by one step. until the fan rotating speed reaches the highest level. users can make the fan rotate at a proper speed according to the current temperature. Double-click The value range is 1 to 30. with the unit temperature the start temperature. The default the blank area Compulsory to type the parameter value is 5. value. the fan starts being ℃. Parameter Parameter Name Parameter Description Value Range / Requirement The start temperature of the fan.AN5516-06 Optical Line Terminal Equipment GUI Reference 9. The value range is 0 Start When the temperature is higher than to 60. 9-2 Click the Speed level 0 to Compulsory drop-down list to select the value. with the unit being ℃. The temperature increment corresponding to the fan rotating speed increasing one level.1 Configuring Fan Parameters Command function The fan parameter configuration command is used to configure the relationships between the temperature and the rotating speed of the fan. and select Config  fan parameter config in the shortcut menu. Speed level 7. Speed level 0 indicates that the fan stops running. Version: A . the fan rotating speed will increase for one level accordingly. Access method Right-click the FAN card in the object tree. and includes the following sections. and the HG220 (home gateway ONU) as examples.10 GUI Reference of an EPON Terminal This chapter discusses operation commands of an ONU in detail. we take the AN5006-04 (FTTH ONU). Managing user defined alarms Deauthorizing an ONU Configuration command Control command Get information command Version: A 10-1 . In this chapter. the AN5006-07B (FTTB ONU). Alarm English Name Includes FIRE-ALM. HUMIDITY Click the — Compulsory drop-down list to select the value. Property Read-only Configuration Method — The actual name of the alarm. –Down. Access method Click an EPON interface card in the object tree pane. name automatically. right-click the appointed ONU in the ONU list tab at the right side of the GUI. and select Custom Alarm Manage in the shortcut menu. FAN-TEMP-OVER. HUMIDITY-OVER.AN5516-06 Optical Line Terminal Equipment GUI Reference 10. Parameter Parameter Name Default Alarm Name Parameter Description Value Range / Requirement The default alarm name defined When a new row is by the ANM2000. the ANM2000 includes User-defined-alarm-1 will add a default alarm to User-defined-alarm-5. TEMP-Down. Applicable object The AN5006-04. 10-2 Version: A . the AN5006-07B. and the HG220 all support this command. Its value added. DOOR. Then the Custom Alarm Manage window will appear.1 Managing User Defined Alarms Command function The user defined alarm management command is used to configure the user defined alarm names of the ONU dry contact. etc. 10 GUI Reference of an EPON Terminal 10. PON Port The number of the PON port No. 10-3 . Version: A The authorization number of the ONU. connected with the ONU. Onu No. and the HG220 all support this command. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Access method Click an EPON interface card in the object tree pane.2 Deauthorizing an ONU Command function The deauthorizing ONU command is used to deauthorize an authorized ONU. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No. Caution: This command can cause loss of configuration data on the ONU and interrupt services on the ONU. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — ONU. Then the Deauthorize ONU window will appear. Applicable object The AN5006-04. and select Deauthorize ONU in the shortcut menu. the AN5006-07B. After the binding operation is executed. and select ONU Attach/Detach Domain in the shortcut menu. This command also can be used to unbind an ONU with a certain QinQ domain. this ONU will control the service flow according to the rules defined in this QinQ domain. Applicable object The AN5006-04. 10-4 The number of the PON port connected with the ONU. right-click the appointed ONU in the ONU list tab at the right side of the GUI. PON Port No. Version: A . the AN5006-07B. so as to cancel the binding relationship between them. The authorization number of the ONU. interface card containing the PON port — Read-only — — Read-only — — Read-only — connected with the ONU.3. and the HG220 all support this command.3 Configuration Command 10.1 Binding / Unbinding an ONU with a Domain Command function The binding / unbinding ONU with domain command is used to bind the appointed ONU with a configured QinQ domain. ONU No. Then the ONU Attach/Detach Domain window will appear. Access method Click an EPON interface card in the object tree pane.AN5516-06 Optical Line Terminal Equipment GUI Reference 10. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No. Then the Attach DBA Profile window will appear. Click the attach means binding the ONU with Action the QinQ domain configured on the — Compulsory OLT.3. Version: A 10-5 . Click the To select the domain name in the Domainname drop-down list. 10. users should first — Compulsory complete configuration of the QinQ drop-down list to select the value. Applicable object The AN5006-04. detach means unbinding the ONU with the appointed QinQ domain. and select Config → Attach DBA Profile in the shortcut menu.10 GUI Reference of an EPON Terminal Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Performs the binding / unbinding operation. The name of the OLT QinQ domain. Access method Click an EPON interface card in the object tree. domain on the OLT. and the HG220 all support this command. right-click the appointed ONU in the ONU list tab at the right side of the GUI. the AN5006-07B.2 Binding an ONU with a DBA Profile Command function The binding ONU with DBA profile command is used to bind an ONU with a configured DBA profile. the system will assign bandwidth for this ONU according to the rules defined in this DBA profile. After a certain ONU is bound with a DBA profile. drop-down list to select the value. 3 Performing Loop Test of a Port Command function The port loop test command is used to enable / disable the loop test function of an ONU port. 10-6 Version: A . and select Config → Port Loop Detect in the shortcut menu. PON Port The number of the PON port No. ONU No.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No.3. right-click the appointed ONU in the ONU list tab at the right side of the GUI. users name should first complete Click the — configuration of the DBA profile Compulsory drop-down list to select the value. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — ONU. The authorization number of the ONU. Access method Click an EPON interface card in the object tree pane. Then the Port Loop Detect window will appear. connected with the ONU. Applicable object The AN5006-04. 10. on the HSWA card. The name of the DBA profile. it can be used to set the time interval of loop test. the AN5006-07B. After the loop test function of a certain ONU port is enabled. in addition. users can test the link status. and the HG220 all support this command. To select the DBA profile name Profile in the drop-down list. ONU Port No. When this parameter is set to Disable. the loop test function is disabled. Onu No. Via executing this command. the AN5006-07B. enabled. Click the — Compulsory drop-down list to select the value.3. Applicable object The AN5006-04. the loop test function is enabled. Optional. PON Port No.4 Managing Alarm Report of an ONU Command function The ONU alarm report manage command is used to enable / disable the alarm report profile and the alarm report function of an ONU. Enables / disables the loop test UNI Loop Detect Management function. The authorization number of the ONU. Double-click to The number of the ONU port. (s) This parameter Double-click to The value range is valid only type the time is 10 to 3600. and the HG220 all support this command. When this ONU does not use the alarm report profile.10 GUI Reference of an EPON Terminal Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No. Detect Port Loop Time The time interval of loop test. When this parameter is set to Enable. Version: A 10-7 . The number of the PON port connected with the ONU. interface card containing the PON port — Read-only — — Read-only — — Read-only — connected with the ONU. this command can be used to configure the user defined alarm report rules of this ONU. when the loop interval of loop test function is test. 10. — Compulsory type the ONU port number. users can configure whether an ONU uses the alarm report profile. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Optional. the alarm report profile configured in the is enabled. Enables / disables the alarm Compulsory. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — ONU. the alarm report profile window of profile is disabled. — (meaning that Click the the ONU does drop-down list to not use the select the value. Then the ONU Alarm Report Manage window will appear. and select Config → ONU Alarm Report Manage in the shortcut menu. report profile. 10-8 Version: A .AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Click an EPON interface card in the object tree pane. Click the drop-down list to select the value. PON Port No. Onu No. the HSWA card. The authorization number of the ONU. alarm report profile). — alarm report When this parameter is set to management disabled. When the alarm report profile is disabled Alarm ID The name of the ONU alarm. Profile Enable Switch The number of the PON port connected with the ONU. The alarm report When this parameter is set to profile is enabled. this parameter is valid. and the HG220 all support this command. the corresponding alarm Report the ANM2000. right-click the appointed ONU in the ONU list tab at the right side of the GUI. of the ONU will be reported to Configuration Optional. the AN5006-07B. alarm report profile). When this parameter is set to Disable.3. Managing Alarm Report of an ONU Port Command function The ONU port alarm report manage command is used to enable / disable the alarm report profile and the alarm report function of an ONU port. Access method Click an EPON interface card in the object tree pane. Then the ONU Port Alarm Report Manage window will appear. Applicable object The AN5006-04. When this ONU port does not use the alarm report profile. users can configure whether an ONU port uses the alarm report profile. this command can be used to configure the user defined alarm report rules of this ONU port. Via executing this command.5 Method When the alarm report function. and select Config → ONU Port Alarm Report Manage in the shortcut menu.10 GUI Reference of an EPON Terminal Parameter Name Parameter Description Value Range / Requirement report profile is When this parameter is set to disabled Enable. this parameter is valid. Enables / disables the alarm Alarm Property — (meaning that Click the the ONU does drop-down list to not use the select the value. Version: A 10-9 . 10. the corresponding alarm of the ONU will not be reported to the ANM2000. The authorization number of the ONU. — (meaning that Click the the ONU port drop-down list to does not use the select the value. Optional. The number of the ONU port. connected with the ONU.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No. — alarm report When this parameter is set to management Disable. The alarm report When this parameter is set to profile is Enable. the ONU port uses the configured in the alarm report profile. this parameter is valid. — Compulsory drop-down list to select the value. Double-click to Port No. Click the Port Type The type of the ONU port. When the alarm report profile is disabled Alarm ID The name of the ONU port alarm. Onu No. 10-10 Version: A . Click the drop-down list to select the value. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — ONU. Profile Enable Switch Enables / disables the alarm Compulsory. report profile. the ONU port does not profile window of use the alarm report profile. the HSWA card. alarm report profile). PON Port The number of the PON port No. — Compulsory type the serial number of the ONU port. including MG identifier. public key. When the H.10 GUI Reference of an EPON Terminal Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Optional. and the HG220 all support this command. When the alarm When this parameter is set to report profile is Enable. Access method Click an EPON interface card in the object tree pane. right-click the appointed ONU in the ONU list tab at the right side of the GUI. alarm report profile). users can execute this configuration command.6 Configuring Voice MD5 Authentication Command function The voice MD5 authentication configuration command is used to enable / disable the MD5 authentication function. 10. base g.3. When this parameter is set to Disable. the corresponding alarm of the ONU port will not be reported to the ANM2000. this command can configure the related parameters of the MD5 authentication. the corresponding alarm Alarm Report Switch disabled of the ONU port will be reported to the ANM2000. and select Config → Voice MD5 Authentication in the shortcut menu. the AN5006-07B. — (meaning that Click the the ONU port drop-down list to does not use the select the value. Applicable object The AN5006-04. this parameter is valid. and prime p. In addition. Version: A 10-11 . Then the Voice MD5 Authentication window will appear.248 gateway control protocol is used. Onu No. The authorization number of the ONU. 10-12 Version: A . this base number g. close auth. Optional. When the The MG digital identifier. MG ID including the vendor and Users can type up to 32 authentication equipment English characters. Users can type up to 32 English characters. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — ONU. Users can type up to 16 When the Exchange The exchange base number of characters. this key. Optional. Switch Users can select open auth or Click the — Compulsory drop-down list to select the value. authentication Double-click to function is type the MG digital enabled. PON Port The number of the PON port No. Optional. The authentication Double-click to Base the MD5 authentication characters that can be function is type the exchange Number g algorithm. authentication Double-click to function is type the public enabled. disabling information. parameter is valid. When the Shared Key The MD5 public key. A to F.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No. this identifier. parameter is valid. typed include 0 to 9. a enabled. Enables / disables the MD5 Auth authentication function. parameter is valid. connected with the ONU. to f. right-click the appointed ONU in the ONU list tab at the right side of the GUI. optical module parameters. Then the ONU Perf Sort Switch window will appear. typed include 0 to 9. and CPU / memory utilization ratio. environment monitoring parameters. The performance parameters to be collected include port performance statistics. A to F. Applicable object The AN5006-04. the AN5006-07B. 10. The authentication Double-click to Prime the MD5 authentication characters that can be function is type the exchange Number p algorithm. parameter is valid. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No. a enabled. this prime number p. Users can type up to When the Exchange The exchange prime number of 256 characters. Version: A 10-13 .3. and the HG220 all support this command.7 Enabling / Disabling Performance Classification Command function The enabling / disabling performance classification command is used to enable / disable the performance collection function of an ONU. interface card containing the PON port connected with the — Read-only — ONU. and select Config → ONU Perf Sort Switch in the shortcut menu. Access method Click an EPON interface card in the object tree pane. to f.10 GUI Reference of an EPON Terminal Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Optional. and the HG220 all support this command.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description PON Port The number of the PON port No. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — — Read-only — The performance parameter name of the ONU. ONU No. 10. The authorization number of the ONU. In the Services Configuration window. including the service classification.3. connected with the ONU. and CPU/Memory Usage Threshold. Then click the Data Port Config tab in the window that appears. the AN5006-07B. Enables / disables the Switch performance collection function of various performance Click the — Compulsory parameters. etc. and the Data Port Config window will appear. 10-14 Version: A . Optical Detect. Click the Add button in the Data Port Config window to make the Services Configuration window appear. Applicable object The AN5006-04. Its value includes Port Perf Perf Code Statistic. Environment MonitorSwitch. Configuring Data Service on a Port Command function The data port configuration command is used to configure the parameters related to the data service on each FE port of an ONU.8 drop-down list to select the value. users can configure the parameters related to the data service on the ONU. the service type. Access method Click an EPON interface card in the object tree pane. and select Config → Port Service Config in the shortcut menu. right-click the appointed ONU in the ONU list tab at the right side of the GUI. 65534. transparently. 10-15 . the ONU will not process the data and transmit them transparently. Value Range / Requirement — Property Read-only — Compulsory Classification — drop-down list to select the value. Click to type the Compulsory TPID type of the VLAN. unicast means the common data service. When this parameter is set to Click the tag. users system will transmit services of can use this the VLAN according to the Method Click the Is used to configure the VLAN Set Service Configuration — parameter to set service classification setting. and Click the — Compulsory drop-down list to select the value. The value range is 1 to The default value is 33024. TLS Parameter Description The number of the FE port. Click the Set range of the data that are Optional. When this parameter is set to Transparent. Service Classification button in the Services Configuration window. Users can select unicast or Service type multicast. If the CVLAN ID If the CVLAN ID is null. the ONU will add a VLAN VLAN Mode tag for the data. The type of the data service. Enables / disables the TLS function. the system will are transmitted transmit all data services transparently. The VLAN mode of the data service. multicast means the IPTV service.10 GUI Reference of an EPON Terminal Parameter Parameter Name Port No. transmitted transparently. the VLAN range If the service classification is of the data that also null. TPID Version: A The TPID type of the VLAN. — Compulsory drop-down list to select the value. the is null. and perform configuration in the Rule Define window that appears. Optional. The OinQ profile is used when Choose QinQ Profile the SVLAN is added at the ONU side. — is only valid when the QinQ function is Click the drop-down list to select the value. The inner VLAN ID. and select when the QinQ a profile in the function is window that enabled. configure this gateway. users should type the inner VLAN ID system needs to The value range is 1 to transmit the 4085. The name of the QinQ profile. — is only valid Click to type the when the post-translation translation VLAN ID. This parameter VLAN ID The SVLAN ID. the QinQ function is disabled. function is enabled. and this parameter is invalid. namely the local VLAN ID. the inner VLAN ID assigned by Property parameter. Click the Compulsory drop-down list to select the value. inner VLAN ID.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement CVLAN ID In Transparent mode. The value range is 0 to 7. Click the Choose This parameter QinQ Profile is only valid button. Optional. appears. users should type the ONU. This parameter Service The name of the local VLAN Name corresponding to the service. If users select to — add SVLAN at the OLT side. Configuration Optional. 10-16 Version: A . Optional. — is only valid Click to type the when the QinQ SVLAN ID. and the value data service of a also can be set to null. certain CVLAN The service priority. enabled. function is enabled. users can assigned by the home Priority Or Method When the In tag mode. Optional. This parameter Translation value The post-translation VLAN ID. COS Click to type the ID. 3. Configuring Voice Service on a Port Command function The voice port configuration command is used to configure the parameters related to the voice service on each voice port of an ONU. Upstream The maximum uplink Click to type the Maximum bandwidth of the service. 10. Version: A 10-17 . Allowed The default value is 100000 Bandwidth (unit: kbit/s). and the Voice Config window will appear. and select Config → Port Service Config in the shortcut menu.9 downlink bandwidth of the service. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Applicable object The AN5006-04. Guaranteed The default value is 640 (unit: Bandwidth kbit/s).10 GUI Reference of an EPON Terminal Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Service Click to type the Upstream The minimum uplink bandwidth Minimum of the service. The default value is 100000 — Compulsory (unit: kbit/s). The downlink bandwidth of the Click to type the — Compulsory minimum uplink bandwidth of the (kbit/s) Service — Compulsory maximum uplink bandwidth of the (kbit/s) Service Downstream (kbit/s) service. service. the AN5006-07B. and the HG220 all support this command. Access method Click an EPON interface card in the object tree pane. service. Then click the Voice Config tab in the window that appears. The Select or clear the — Compulsory SlienceSp check box. and G. Users can select the SlienceSp SlienceSp check box to enable the silence compression function.711U. 10-18 Version: A . whose service is being — Read-only — Compulsory — configured. eliminated. Enables / disables the silence compression function. purpose is to reduce the mute frames in the line and save bandwidth.723. Phone Its value should be the same as Number the telephone number Click to type the telephone number. G.729. CVLAN ID value. G. Its value includes G. The transmission mode of the Fax Mode fax service. The CVLAN ID. Compulsory Click to type the CVLAN ID. Enables / disables the echo suppression function. the echo in the conversation can be Select or clear the — Compulsory Echo Cancel check box. Its value includes transparent drop-down list to Click the — Compulsory drop-down list to select the value. this parameter should both be set to the inner The value range is 1 to 4085.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The number of the voice port Port No. configured in the NGN Configuration window.711A. The telephone number corresponding to the port. Click the — Compulsory select the value. Voice Code Mode The coding and decoding rule of the voice service. Echo After the echo suppression Cancel function is enabled.38. Signal VLAN ID In single-tagged VLAN mode and QinQ mode. and T. This parameter Outer COS The priority of the outer VLAN. the QinQ function — Compulsory will be enabled. and RFC2833. — is valid only Click to type the when the QinQ SVLAN ID. and users can QinQ State check box. This parameter SVLAN ID The SVLAN ID of the voice service. This parameter Inner COS The priority of the inner VLAN. enabled. when the QinQ function is Click the drop-down list to select the value.10 GUI Reference of an EPON Terminal Parameter Name Parameter Description Value Range / Requirement Property The transmission mode of the DTMF DTMF signal. Optional. The value range is 0 to is valid only 7. when the QinQ function is Click the drop-down list to select the value. Select or clear the When the QinQ State check box QinQ State is selected. function is enabled. enabled. configure the SVLAN and priority. Mode Its value includes transparent Configuration Method Click the — Compulsory drop-down list to select the value. Enables / disables the QinQ function. Optional. Optional. The value range is 0 to is valid only 7. Version: A 10-19 . 3. Applicable object The AN5006-06A supports this command. 10-20 Version: A . — Compulsory CATV Enable/Disable button box. and select Config → Port Service Config in the shortcut menu. Access method Click an EPON interface card in the object tree pane. and the CATV Config window will appear. right-click the appointed ONU in the ONU list tab at the right side of the GUI.3.AN5516-06 Optical Line Terminal Equipment GUI Reference 10. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Select or clear the CATV Enables / disables the CATV Enable/Disable service. 10. Then click the CATV Config tab in the window that appears.11 Configuring TDM Service on a Port Command function The TDM port configuration command is used to configure the parameters related to the TDM service on each E1 port of an ONU.10 Configuring CATV Service on a Port Command function The CATV port configuration command is used to configure the parameters related to the CATV service on each CATV port of an ONU. Applicable object The AN5006-04 and the AN5006-07B support this command. The ONU generates the key and modifies it regularly.12 Configuring Encryption Command function The encryption configuration command is used to perform encryption setting of the ONU data.3. and select Config → Port Service Config in the shortcut menu. Value Range / Requirement — TDM Slot The slot number of the TDM The value range: 11 to No service card. the system must transmit all downlink data frames in encryption mode. 32. In the PON system. Version: A 10-21 . Click to type the TDM E1 The E1 timeslot number of the The value range: 1 to No local OLT. To prohibit user information from being stolen. and each ONU uses its dedicated key. and each ONU can receive all downlink data. 10. Property Read-only Configuration Method — Click the Compulsory drop-down list to select the value. the AN5006-07B. the data are broadcasted to various ONUs in the downlink direction. and the HG220 all support this command. the privacy of the downlink data can be guaranteed.10 GUI Reference of an EPON Terminal Access method Click an EPON interface card in the object tree pane. Parameter Parameter Name Port No Parameter Description The number of the current E1 port. 16. right-click the appointed ONU in the ONU list tab at the right side of the GUI. and the E1 Config window will appear. Then click the E1 Config tab in the window that appears. Applicable object The AN5006-04. The AN5516-06 uses the AES algorithm to perform encryption. Compulsory E1 timeslot number of the local OLT. Via this operation. ONU No. 10-22 Double-click to type the time interval to modify the encryption key value of the downlink data. Then the Encryption window will appear. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No. and select Config → Encryption in the shortcut menu. encryption function is enabled.AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Click an EPON interface card in the object tree pane. When this parameter is set to Disable. Enables / disables the encryption function. The authorization number of the ONU. connected with the ONU. When this parameter is set to Click the Enable. Version: A . PON Port The number of the PON port No. this parameter is valid. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — — Compulsory ONU. The value range: 1 to 65534. the system will perform Encryption encryption of the downlink data drop-down list to select the value. When the Encryption The time interval to modify the Refresh encryption key value of the Time (s) downlink data. the system will not use the encryption function. right-click the appointed ONU in the ONU list tab at the right side of the GUI. to the ONU. Optional. and the collision domains can be isolated.3. Access method Click an EPON interface card in the object tree pane. the AN5006-07B.13 Configuring Port Isolation Command function The port isolation configuration command is used to enable or disable the port isolation function of an ONU. right-click the appointed ONU in the ONU list tab at the right side of the GUI. After the port isolation function of an ONU is enabled. Then the Port Isolation window will appear. 10-23 . connected with the ONU. ONU No.10 GUI Reference of an EPON Terminal 10. PON Port The number of the PON port No. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — ONU. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No. and select Config → Port Isolation in the shortcut menu. Applicable object The AN5006-04. State Version: A The authorization number of the ONU. the communications between its ports are disabled. and the HG220 all support this command. Click the — Compulsory drop-down list to select the value. Enables / disables the port isolation function. The FE number of the ONU. The value range: 0 to 4294967294.AN5516-06 Optical Line Terminal Equipment GUI Reference 10. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — — Read-only — ONU. Here the CRC is used. ONU No. Version: A . Applicable object The AN5006-04 supports this command. PON Port No. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No. a corresponding alarm will occur and be reported to the ANM2000. Double-click to Compulsory type the parameter value. When the detected CRC error exceeds the set threshold value. The number of the PON port connected with the ONU. Then the FE Port Perf Threshold window will appear. and select Config → FE Port Perf Threshold in the shortcut menu. Double-click to Compulsory type the parameter value. Down The downlink CRC error Crc-Threshold statistical threshold of the FE (/sec) port. Port No. Here the CRC is used.3. The authorization number of the ONU. Up The uplink CRC error Crc-Threshold statistical threshold of the FE (/sec) port. 10-24 The value range: 0 to 4294967294.14 Configuring Performance Threshold of an FE Port Command function The FE port performance threshold configuration command is used to set the CRC error detection threshold of each FE port on an ONU. Access method Click an EPON interface card in the object tree pane. right-click the appointed ONU in the ONU list tab at the right side of the GUI. 10 GUI Reference of an EPON Terminal 10. Then the Translation VLAN Mode window will appear. Applicable object The AN5006-04.15 Configuring VLAN Translation Mode Command function The VLAN translation mode configuration command is used to set the VLAN translation mode of an ONU. Parameter Parameter Name Parameter Description Value Range / Property Configuration Method — Read-only — — Read-only — — Read-only — Requirement The slot number of the EPON Slot No. 10-25 . and the HG220 all support this command. Access method Click an EPON interface card in the object tree pane. PON Port The number of the PON port No. right-click the appointed ONU in the ONU list tab at the right side of the GUI. users can enable the translation function to strip the old tag and add a new valid tag. connected with the ONU.3. The VLAN translation function is described as follows: When the VLAN tag added to the service by the subscriber terminal is not in the valid range assigned by the operator. interface card containing the PON port connected with the ONU. ONU No. the AN5006-07B. Version: A The authorization number of the ONU. and select Config → Translation VLAN Mode in the shortcut menu. AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The VLAN translation mode. Convergence: N: 1 VLAN translation. In this mode, multiple uplink VLANs are aggregated into a unique network side VLAN ID, and they are reversely mapped into the corresponding multiple Switch VLANs in the downlink direction. — Compulsory Click the drop-down list to select the value. Not-Convergence: 1: 1 VLAN translation. In this mode, the system strips the invalid VLAN tag of the uplink data, and then adds the valid tag. Hybrid: the mixed mode of N:1 VLAN translation and 1:1 VLAN translation. 10.3.16 Controlling Port MAC Address Number Command function The port MAC address number control command is used to control MAC address number on the PON port and FE port of an ONU. Under each port, the number of online MAC addresses is assigned so that the number of PCs sharing this port at the same time is restricted. The purpose of this operation is to control the traffic in the network and avoid blocking. Applicable object The AN5006-04, the AN5006-07B, and the HG220 all support this command. 10-26 Version: A 10 GUI Reference of an EPON Terminal Access method Click an EPON interface card in the object tree pane, right-click the appointed ONU in the ONU list tab at the right side of the GUI, and select Config → Port MAC-Learning Limit in the shortcut menu. Then the Config Port MAC Limit window will appear. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — — Read-only — ONU. PON Port No. ONU No. The number of the PON port connected with the ONU. The authorization number of the ONU. The number of the PON Port No. interface and FE port of the ONU. Click the Enables / disables the port Enable/Disable MAC address number control — Compulsory drop-down list to select the value. function. Is used to set the maximum allowed number of MAC addresses under each port. Optional. For a PON port, this parameter refers to the maximum allowed number of Mac Number online MAC addresses on the ONU. For an FE port, this parameter refers to the maximum The value range: 0 to 8191. The default value is 64. When Enable/Disable Double-click to is set to Enable, type the this parameter parameter value. must be configured. allowed number of online MAC addresses under this port. Version: A 10-27 AN5516-06 Optical Line Terminal Equipment GUI Reference 10.3.17 Binding a Packet Suppression Profile Command function The packet suppression profile binding command is used to bind a certain FE port of the ONU with a configured packet suppression profile. For a port bound with the packet suppression profile, its rate will be controlled according to rules defined in the profile. Applicable object The AN5006-04, the AN5006-07B, and the HG220 all support this command. Access method Click an EPON interface card in the object tree pane, right-click the appointed ONU in the ONU list tab at the right side of the GUI, and select Config → Packets Rate Control Profile Attach in the shortcut menu. Then the Packets Rate Control Profile Attach window will appear. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — — Read-only — ONU. PON Port The number of the PON port No. connected with the ONU. Onu No. Port No. 10-28 The authorization number of the ONU. The FE port number of the ONU. Version: A 10 GUI Reference of an EPON Terminal Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The name of the packet suppression profile. To select the name of the packet Click the suppression profile in the Profile Id drop-down list, users need to — Compulsory complete configuration of the drop-down list to select the value. packet suppression profile via the configuration of the HSWA card. 10.3.18 Configuring User Defined Alarms Command function The user defined alarm configuration command is used to enable the low-level alarm access function of the ONU. When a certain access point detects the low level status, a low-level alarm will occur and be reported to the ANM2000. Applicable object The AN5006-04, the AN5006-07B, and the HG220 all support this command. Access method Click an EPON interface card in the object tree pane, right-click the appointed ONU in the ONU list tab at the right side of the GUI, and select Config → User Defined Alarm Config in the shortcut menu. Then the User Defined Alarm Config window will appear. Version: A 10-29 AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — ONU. PON Port The number of the PON port No. connected with the ONU. ONU No. The authorization number of the ONU. The interface number of the ONU alarm access point that Interface Number Double-click to can be enabled currently. For the FTTH ONU, up to two The value range: 1 to 5. Compulsory type the interface number. alarm interfaces can be enabled. For the FTTB ONU, up to five alarm interfaces can be enabled. The report condition of the access point alarm. When the Alarm access point detects the low Conditions level status, a low-level alarm — Read-only — will occur and be reported to the ANM2000. 10.3.19 Configuring Port ACL Rules Command function The port ACL rule configuration command is used to configure the ACL rules (access control list rules) of an ONU FE port. The FE port will control the data stream according to the defined rules. Applicable object The AN5006-04 and the HG220 support this command. 10-30 Version: A 10 GUI Reference of an EPON Terminal Access method Click an EPON interface card in the object tree pane, right-click the appointed ONU in the ONU list tab at the right side of the GUI, and select Config → Port Rules in the shortcut menu. Then click the FE Port ACL Rule tab in the window that appears, and the FE Port ACL Rule window will appear. Parameter Parameter Name Port No. Parameter Description The number of each FE port on the ONU. Value Range / Property Configuration Method — Read-only — — Compulsory Requirement The operation to the data meeting the data stream control rules. Its value includes Forward and Deny. Action Forward: Forwards the data meeting the data stream control Click the drop-down list to select the value. rules. Deny: Discards the data meeting the data stream control rules. The data stream control rules of Double-click and the FE port. Rule Users can select rules such as Define Based on SA MAC, Based on perform configuration — DA MAC, and Based on DA Type of IP. 10.3.20 Compulsory operations in the Rule Define window that appears. Configuring Port QoS Rules Command function The port QoS rule configuration command is used to configure the QoS rules of an ONU FE port. The FE port will control the data stream according to the defined rules. Applicable object The AN5006-04 and the AN5006-07B support this command. Version: A 10-31 AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Click an EPON interface card in the object tree pane, right-click the appointed ONU in the ONU list tab at the right side of the GUI, and select Config → Port Rules in the shortcut menu. Then click the FE Port QoS Rule tab in the window that appears, and the FE Port QoS Rule window will appear. Parameter Parameter Name Port No. Parameter Description The number of each FE port on the ONU. Value Range / Requirement — Property Read-only Configuration Method — Double-click to type Precedence The priority of the QoS control The value range: 1 to rule of the data stream. 12. Compulsory the priority of the QoS control rule of the data stream. Queue The number of the priority Mapped queue. The value range: 1 to 4. Compulsory Click the drop-down list to select the value. The priority of the data stream on the FE port. Users can select 1 to 7 Priority (meaning the corresponding priority) or Disable (meaning to The value range: 1 to 7, and Disable. Compulsory Click the drop-down list to select the value. disable the priority setting function). The data stream control rules of Double-click and the FE port. Rule Define Users can select rules such as Based on SA MAC, Based on DA MAC, and Based on DA Type of IP. 10.3.21 perform configuration — Compulsory operations in the Rule Define window that appears. Configuring Port Flow Rate Control Rules Command function The port flow rate control rule configuration command is used to configure the flow rate control rules of an ONU FE port. The FE port will control the data stream rate according to the defined rules. 10-32 Version: A 10 GUI Reference of an EPON Terminal Applicable object The AN5006-07B supports this command. Access method Click an EPON interface card in the object tree pane, right-click the appointed ONU in the ONU list tab at the right side of the GUI, and select Config → Port Rules in the shortcut menu. Then click the FE Port Stream Rate Limiting tab in the window that appears, and the FE Port Stream Rate Limiting window will appear. Parameter Parameter Name Port No. Parameter Description The number of each FE port on the ONU. US Policing Enables / disables the uplink Enable/Disable rate control function. Value Range / Requirement — Property Read-only Configuration Method — Click the — Compulsory drop-down list to select the value. Optional. US Policing The guaranteed value of the The value should be a CIR (kbit/s) uplink rate on this FE port. multiple of 64. When the uplink Double-click to rate control type the function is guaranteed value enabled, this of the uplink rate parameter is on this FE port. valid. Optional. US CBS (Byte) The uplink burst size of data The value should be a transmission on this FE port. multiple of 64. When the uplink Double-click to rate control type the uplink function is burst size of data enabled, this transmission on parameter is this FE port. valid. Optional. When the uplink rate control The uplink excess burst size US EBS (Byte) of data transmission on this FE port. — function is enabled, this parameter is valid. Version: A Double-click to type the uplink excess burst size of data transmission on this FE port. 10-33 AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description DS Policing Enables / disables the Enable/Disable downlink rate control function. Value Range / Requirement Property — Compulsory CIR (kbit/s) downlink rate on this FE port. drop-down list to select the value. When the The guaranteed value of the Method Click the Optional. DS Policing Configuration downlink rate — control function is enabled, this parameter is valid. Double-click to type the guaranteed value of the downlink rate on this FE port. Optional. DS PIR (kbit/s) The maximum value of the downlink cell rate. — When the Double-click to downlink rate type the control function maximum value is enabled, this of the downlink parameter is cell rate. valid. Double-click and The data stream control rules perform of the FE port. Rule Define Users can select rules such as Based on SA MAC, Based on DA MAC, and Based on DA Type of IP. 10.3.22 configuration — Compulsory operations in the Rule Define window that appears. Configuring ONU Optical Power Compensation Command function The ONU optical power compensation configuration command is used to compensate the optical power of an ONU. When the Tx / Rx optical power of an ONU is too high or too low, users can execute this command to adjust the optical power, so as to ensure that the optical power value is in the proper range. Applicable object The AN5006-04, the AN5006-07B, and the HG220 all support this command. 10-34 Version: A 10 GUI Reference of an EPON Terminal Access method Click an EPON interface card in the object tree pane, right-click the appointed ONU in the ONU list tab at the right side of the GUI, and select Config → ONU Optical Compensation in the shortcut menu. Then the ONU Optical Compensation window will appear. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — ONU. PON Port The number of the PON port No. connected with the ONU. ONU No. The authorization number of the ONU. Double-click to Tx Adjust The Tx optical power adjustment The value range: (dBm) value of the ONU. -10000.00 to 10000.00. Compulsory type the Tx optical power adjustment value of the ONU. Double-click to Rx Adjust The Rx optical power adjustment The value range: (dBm) value of the ONU. -10000.00 to 10000.00. Compulsory type the Rx optical power adjustment value of the ONU. OLT Rx Adjust (dBm) 10.3.23 Double-click to The Rx optical power adjustment The value range: value of the OLT. -10000.00 to 10000.00. Compulsory type the Rx optical power adjustment value of the OLT. Configuring Bandwidth of the Highest-Priority Service Command function The highest-priority service bandwidth configuration command is used to set the bandwidth of the highest-priority service on an ONU. Version: A 10-35 AN5516-06 Optical Line Terminal Equipment GUI Reference Applicable object The AN5006-04, the AN5006-07B, and the HG220 all support this command. Access method Click an EPON interface card in the object tree pane, right-click the appointed ONU in the ONU list tab at the right side of the GUI, and select Config → High-Pri Services Bandwidth in the shortcut menu. Then the High-Pri Services Bandwidth window will appear. Parameter Parameter Name Parameter Description Value Range / Property Configuration Method — Read-only — — Read-only — — Read-only — Requirement The slot number of the EPON ONU Slot interface card containing the No. PON port connected with the ONU. PON Port The number of the PON port No. connected with the ONU. ONU No. The authorization number of the ONU. The bandwidth of the Bandwidth highest-priority service on the ONU. The unit is kbit/s. 10.3.24 Double-click to type the The value range: 0 to 1000000. Compulsory bandwidth of the highest-priority service on the ONU. Configuring Voice Media Stream Command function The voice media stream configuration command is used to configure the relate parameters of the voice media stream, including Voice RTP Service Name, RTP Config, SVLAN Tpid, SVLAN Id, SVLAN Cos, etc. Applicable object The AN5006-04, the AN5006-07B, and the HG220 all support this command. 10-36 Version: A and select Config → ONU NGN Config → Voice RTP Config in the shortcut menu. 4085. Service Users should use the name of a Name service VLAN configured in the Click the — Compulsory drop-down list to select the value. The name of the voice media Voice RTP stream service. Optional. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — ONU. When RTP SVLAN Id The service VLAN ID. The authorization number of the ONU. When RTP SVLAN Tpid The TPID of the service VLAN. this parameter is Double-click to type the TPID of the service VLAN. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No. 4088. HSWA card configuration GUI.10 GUI Reference of an EPON Terminal Access method Click an EPON interface card in the object tree. RTP Enables / disables the RTP Config configuration function. Version: A 10-37 . The number of the PON port connected with the ONU. Then the Voice RTP Config window will appear. valid. Enable. Optional. this parameter is Double-click to type the service VLAN ID. PON No. ONU No. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Enable. valid. 65534. also called The value range: 1 to Config is set to SVLAN ID. Click the — Compulsory drop-down list to select the value. The value range: 1 to Config is set to 65534. also The value range: 1 to Config is set to called CVLAN ID. — Config is set to Enable. RTP The destination IP address of the IPaddr RTP voice media stream. this the customer parameter is VLAN. valid. 65534. stream. Optional. this parameter is Double-click to type the priority of the service VLAN. 4085. valid. this parameter is Double-click to type the customer VLAN ID. this address of the parameter is RTP voice media valid.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Optional. Double-click to When RTP type the Config is set to destination IP Enable. When RTP RTP Mask The address mask of the RTP stream. valid. this parameter is Click the drop-down list to select the value. — Optional. Optional. Enable. The value range: 0 to 7. 4088. The value range: 0 to 7. valid. 10-38 Version: A . When RTP Double-click to The value range: 1 to Config is set to type the TPID of 65534. Optional. When RTP Double-click to Config is set to type the priority of Enable. Config is set to Enable. Optional. this the customer parameter is VLAN. When RTP SVLAN Cos The priority of the service VLAN. CVLAN The priority of the customer Cos VLAN. When RTP CVLAN Id The customer VLAN ID. valid. Enable. CVLAN Tpid The TPID of the customer VLAN. valid. Applicable object The AN5006-04.3.10 GUI Reference of an EPON Terminal Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Optional. the AN5006-07B. right-click the appointed ONU in the ONU list tab at the right side of the GUI. PON No. ONU No. and the HG220 support this command. Version: A The number of the PON port connected with the ONU. Access method Click an EPON interface card in the object tree pane.25 Enabling / Disabling a POTS Port Command function The enabling / disabling POTS port command is used to enable or disable a POTS port. RTP The gateway address of the RTP Gateway stream. 10. interface card containing the PON port connected with the ONU. Parameter Parameter Name Parameter Description Value Range / Property Configuration Method — Read-only — — Read-only — — Read-only — Requirement The slot number of the EPON Slot No. — When RTP Double-click to Config is set to type the gateway Enable. The authorization number of the ONU. Then the ONU POS Port Enable window will appear. and select Config → ONU NGN Config → POS Port Enable/Disable in the shortcut menu. this address of the parameter is RTP stream. 10-39 . 10-40 The number of the PON port connected with the ONU. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — ONU. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No.3.26 Property Compulsory Disable. 10. and select Config → ONU NGN Config → POS Phone Number in the shortcut menu. ONU No. Configuring POS Telephone Number Command function The POS telephone number configuration command is used to configure the POS telephone number. The authorization number of the ONU. Version: A . right-click the appointed ONU in the ONU list tab at the right side of the GUI. the AN5006-07B. PON No. and the HG220 all support this command. Then the POS Phone Number window will appear. Click the drop-down list to select the value. Applicable object The AN5006-04. Enable/disable Requirement The number of the POTS — port. Configuration Method Read-only — Includes Enables or disables the Enable and POTS port.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Value Range / Parameter Description Name POS Port No. Access method Click an EPON interface card in the object tree pane. and the allowed characters set is interconnection between different POS services. The authorization number of the ONU. Applicable object The AN5006-07B and the HG220 support this command. ONU No. and select Config → ONU NGN Config → IPT Phone Number in the shortcut menu. PON No. Number characters. right-click the appointed ONU in the ONU list tab at the right side of the GUI.10 GUI Reference of an EPON Terminal Parameter Name Parameter Description The POS telephone number. Version: A The number of the PON port connected with the ONU. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No.27 The value range is Type A to Type H. The POS type. 10. Access method Click an EPON interface card in the object tree pane. 10-41 . Then the IPT Phone Number window will appear. 0123456789abcdABCD*#. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — ONU.3. Configuring Intelligent Public Telephone Number Command function The intelligent public telephone number configuration command is used to configure the intelligent public telephone number. used for POS Type Requirement Property The maximum length is 20 POS Phone Value Range / Click the Compulsory drop-down list to select the value. Configuration Method Double-click to Compulsory type the POS telephone number. the AN5006-07B. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the Slot No. The number of the PON PON Port No. public telephone services. 10. Applicable object The AN5006-04. type. port connected with the ONU.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property The intelligent public telephone characters. EPON interface card containing the PON port — Read-only — — Read-only — connected with the ONU. characters set is type the Compulsory number. and select Config → ONU Bandwidth in the shortcut menu. Then the ONU Bandwidth window will appear. Access method Click an EPON interface card in the object tree pane. and the HG220 all support this command.28 intelligent public telephone 0123456789abcdABCD*#. right-click the appointed ONU in the ONU list tab at the right side of the GUI.3. The intelligent public telephone IPT Type The value range is Type A between different intelligent to Type H. 10-42 Version: A . Click the Compulsory drop-down list to select the value. used for interconnection Method Double-click to The maximum length is 20 IPT Phone Configuration Configuring ONU Bandwidth Command function The ONU bandwidth configuration command is used to configure the maximum allowed uplink / downlink bandwidth of an ONU. and the allowed Number number. Value Range / Requirement — Property Read-only Configuration Method — Double-click to Upstream The maximum uplink The value range: 10 to Bandwidth (kbit/s) bandwidth of the ONU.10 GUI Reference of an EPON Terminal Parameter Name Parameter Description The authorization number Onu No. and the services carried by the ONU will not be interrupted. 1000. This improves the reliability of system running. 1000. Applicable object The AN5006-07B supports this command. If the optical line protection function is enabled and the protection optical line is connected correctly. Configuring Optical Line Protection Command function The optical line protection configuration command is used to enable / disable the optical line protection function of an ONU. of the ONU.29 bandwidth profile. Double-click to type the Downstream The maximum downlink The value range: 10 to Bandwidth (kbit/s) bandwidth of the ONU. The name of the bound ProfileName 10. Access method Version: A 10-43 . the ONU can switch to the protection optical line rapidly. when the working optical line has faults. The binding / unbinding status of the bandwidth ProfileBindingInfo — Read-only — — Read-only — profile. type the Compulsory maximum uplink bandwidth of the ONU. Compulsory maximum downlink bandwidth of the ONU.3. Protect Switch Enable When it is set to Enable. Access method 10-44 Version: A . optical line protection function is disabled. Enabling the RSTP function can avoid generation of network loop inside the LAN.3. the drop-down list to select the value. so as to solve the “broadcast storm” problem of the looped Ethernet network. Then the Optical Line Protection window will appear. Enables / disables the optical line protection function. Applicable object The AN5006-07B and the HG220 support this command.30 Configuring RSTP Command function The RSTP configuration command is used to enable / disable the RSTP function of an ONU. PON port connected with the — Read-only — — Read-only — — Read-only — ONU.AN5516-06 Optical Line Terminal Equipment GUI Reference Click an EPON interface card in the object tree pane. right-click the appointed ONU in the ONU list tab at the right side of the GUI. ONU No. Click the — Compulsory When it is set to Disable. and select Config → Optical Line Protection in the shortcut menu. PON Port The number of the PON port No. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON ONU Slot interface card containing the No. 10. connected with the ONU. the optical line protection function is enabled. The authorization number of the ONU. Then the RSTP Enable window will appear. and select Config → ONU Alarm Threshold in the shortcut menu. When it is set to Disable. PON Port The number of the PON port No. and select Config → RSTP in the shortcut menu. The authorization number of the ONU. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Applicable object The AN5006-07B and the HG220 support this command. Parameter Parameter Name Parameter Description Value Range / Property Configuration Method — Read-only — — Read-only — — Read-only — — Compulsory Requirement The slot number of the EPON Slot No. Access method Click an EPON interface card in the object tree pane.31 Configuring Optical Power Monitor Function Command function The optical power monitor configuration command is used to enable / disable the optical power monitor function of an ONU.10 GUI Reference of an EPON Terminal Click an EPON interface card in the object tree pane. ONU No. right-click the appointed ONU in the ONU list tab at the right side of the GUI. connected with the ONU. interface card containing the PON port connected with the ONU.3. Then the ONU Alarm Threshold window will appear. Click the drop-down list to select the value. Version: A 10-45 . 10. RSTP When it is set to Enable. Enables / disables the RSTP function. the Enable RSTP function is enabled. the RSTP function is disabled. Then the Queue Schedule window will appear. 10. Enable/Disable The number of the PON port connected with the ONU. users can configure the scheduling algorithm used by each priority queue of the ONU and the corresponding weight.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Value Range / Property Configuration Method — Read-only — — Read-only — — Read-only — — Compulsory Requirement The slot number of the EPON Slot No. PON Port No. Configuring ONU Ethernet Switch Queue Scheduling Algorithm Command function The ONU Ethernet switch queue scheduling algorithm configuration command is used to set the Ethernet switch queue scheduling algorithm of an ONU. Via executing this command. Access method Click an EPON interface card in the object tree pane. and select Config → Queue Schedule in the shortcut menu. 10-46 Version: A .32 Click the drop-down list to select the value. The authorization number of the ONU. interface card containing the PON port connected with the ONU. right-click the appointed ONU in the ONU list tab at the right side of the GUI. ONU No. Applicable object The AN5006-07B supports this command. Enables / disables the optical power monitor function.3. SP: Ensures that higher-priority services are always processed prior to lower-priority services. In Mode this mode. lower-priority services are processed by a certain proportion. WRR: Is a weighted round robin queue scheduling mechanism. The mode used by the scheduling algorithm. Queue The value includes Priority Priority Queue 0. when the system processes higher-priority Click the drop-down list to select the value. Parameter Description The slot number of the card. and Priority Queue 3. hybrid: a mixed algorithm including strict priority and weighted priority.10 GUI Reference of an EPON Terminal Parameter Parameter Name ONU Slot No. Queue Schedule Method Version: A The selected scheduling algorithm. 10-47 . interface card containing the PON port connected with the ONU. connected with the ONU. Priority Queue 2. services. PON Port The number of the PON port No. The number of the priority queue. Value Range / Property Configuration Method — Read-only — — Read-only — — Read-only — — Compulsory — Read-only — — Read-only — Requirement The slot number of the EPON Slot No. Priority Queue 1. PON No. Parameter Description The slot number of the card. 10-48 The number of the PON port connected with the ONU. Access method Click an EPON interface card in the object tree pane.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The service processing Double-click to type the bandwidth assignment Weight proportion (weight). Value Range / Requirement Property Configuration Method — Read-only — — Read-only — — Read-only — The slot number of the EPON Slot No. Version: A . interface card containing the PON port connected with the ONU. and select Config → ONU manage VLAN in the shortcut menu. 1 to 55. the more bandwidth it occupies for processing.33 Configuring Management VLAN of an ONU Command function The ONU management VLAN configuration command is used to set the parameters related to the management VLAN of an ONU. 10. Compulsory service processing bandwidth assignment proportion. Then the ONU manage VLAN window will appear. The higher The value range: the weight value of a service is. Parameter Parameter Name ONU Slot No. right-click the appointed ONU in the ONU list tab at the right side of the GUI.3. Applicable object The HG220 supports this command. 4085. Double-click to The maximum length is16 characters. The name of the management Name VLAN. Compulsory type the TPID of the management SVLAN. The uplink port of the ONU. The value range: 0 to 7. Compulsory Is value includes All. drop-down list to select the value. 65534. Compulsory type the priority of the management CVLAN. 10-49 . Tpid The default value is 33024. Compulsory type the ID of the management SVLAN. GE1. The value range: 1 to 4. and GE2. Double-click to The value range: 1 to 65534. Compulsory type the ID of the management CVLAN. Manage CVLAN CoS Version: A Double-click to The priority of the management CVLAN. Manage CVLAN Tpid Double-click to The TPID of the management The value range: 1 to CVLAN. Port No. The tagging property of the the management VLAN. 4085. Double-click to Manage The ID of the management The value range: 1 to SVLAN Id SVLAN. Manage The TPID of the management SVLAN SVLAN. Compulsory type the TPID of the management CVLAN.10 GUI Reference of an EPON Terminal Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The number of the management SN VLAN. Click the — Compulsory Tag/Untag management VLAN. Double-click to Manage The ID of the management The value range: 1 to CVLAN Id CVLAN. The default value is manager. PON. It is generated — Read-only — automatically. type the name of Click the — Compulsory drop-down list to select the value. Compulsory type the ID of the management VLAN. Double-click to ManageID The ID of the management VLAN. Applicable object The HG220 supports this command. Then the WAN Service window will appear. Click the — Compulsory drop-down list to select the value. 10. Double-click to type the gateway The gateway of the in-band Gateway network management port on — Compulsory the ONU. Mask The mask of the in-band network management port on the ONU.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Double-click to type the IP The IP address of the in-band Ip addr network management port on — Compulsory the ONU. address of the in-band network management port on the ONU. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Access method Click an EPON interface card in the object tree pane. and select Config → WAN Service in the shortcut menu.3. of the in-band network management port on the ONU.34 Configuring WAN-Connected Service Command function The WAN-connected service configuration command is used to configure the profile of the WAN-connected service and set the parameters such as WAN connection mode. 10-50 Version: A . The WAN connection Wan_Conn_Type type. Version: A 10-51 . and Other. card containing the PON port connected with the ONU. TR069_INTERNET. INTERNET. Property Configuration Method — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Compulsory — Compulsory The slot number of the EPON interface Slot No. Parameter Value Range / Description Requirement The slot number of the card. The number of the PON No. The name of the WAN connection. It is generated automatically by the equipment according WAN Index to the generation sequence of the WAN connection. Click the drop-down list to select the value. The generation rule is Wan_Name number_key word_bridge or route mode_ PVC / VLAN information.10 GUI Reference of an EPON Terminal Parameter Parameter Name ONU Slot No. The WAN connection mode. Wan_Mode Its value includes TR069. The index value increases in increment order. Its value includes Route and Click the drop-down list to select the value. Bridge. PON port connected with the ONU. Enable. this WAN connection.1p priority of the WAN connection. this Click the drop-down list to select the value. — is set to Static. The mode of the WAN connection obtaining Wan_D_S_P the IP address. Compulsory Double-click to type the parameter value. The value range: Wan_COS The 802. DHCP. Double-click to type the 0 to 7. Config window. Optional.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Value Range / Description Requirement Property Configuration Method Its value should use Wan_Vlan_Id the CVLAN ID value The value range: configured in the 1 to 4085.1p priority of the WAN connection. 10-52 Version: A . parameter is valid. or Services 0xffff (indicating Configuration dialog null). parameter is valid. Enables / disables the Wan_NAT_Enable NAT function. it means the subnet mask. Optional. it means — the static IP address. value is 0xffff. When When Wan_D_S_P is Wan_Ip_Address set to Static. The default box in the Data Port value is 0xffff. or 0xffff (indicating null). When Wan_D_S_P When Wan_D_S_P is Wan_Ip_Subnet set to Static. Compulsory The default 802. Wan_D_S_P Double-click to type the is set to static IP address of the Static. and PPPOE. Its value includes Click the drop-down list to select the value. Static. The default value is — Compulsory — Compulsory Click the drop-down list to select the value. When When Wan_D_S_P is Wan_Master_DNS set to Static. Optional. this WAN connection. When When Wan_D_S_P is Wan_Slave_DNS set to Static. it means — the default gateway. Version: A 10-53 . parameter is valid. parameter is valid. When Wan_D_S_P is Wan_PPPOE_Username set to PPPOE. — is set to The default value is PPPOE. Wan_D_S_P Double-click to type the is set to master DNS of the Static. Optional. it means — the master DNS. Optional. Wan_D_S_P Double-click to type the is set to default gateway of the Static. PPPOE. When The maximum Wan_D_S_P Double-click to type the length is 32 is set to user name of the characters. Wan_D_S_P Double-click to type the is set to slave DNS of the WAN Static. this PPPoE connection. this Disable. parameter is Click the drop-down list to select the value. When When Wan_D_S_P is Wan_Gateway set to Static. Wan_PPPOE_Proxy Enables / disables the When PPPoE proxy Wan_D_S_P function. it means the user name of the connection. valid.10 GUI Reference of an EPON Terminal Parameter Name Parameter Value Range / Description Requirement Property Configuration Method Optional. Optional. it means — the slave DNS. this WAN connection. parameter is valid. this connection. parameter is valid. Disable. Applicable object The HG220 supports this command. this connection. When When Wan_D_S_P is Wan_PPPOE_Mode set to PPPOE. 10. it means the name of the PPPoE service. it means the connecting Wan_D_S_P — is set to PPPOE. parameter is valid. parameter is valid.3. 10-54 Version: A . Optional. parameter is valid. Wan_Qos_Enable — The default value is Compulsory Click the drop-down list to select the value. PPPOE. this mode. this service. PPPOE. When The maximum Wan_D_S_P Double-click to type the length is 32 is set to name of the PPPoE characters. When Wan_D_S_P is Wan_PPPOE_Name set to PPPOE. Enables / disables the QoS function of the WAN connection. Optional.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Value Range / Description Requirement Property Configuration Method Optional. it means the password of the connection. When The maximum Wan_D_S_P Double-click to type the length is 32 is set to password of the PPPoE characters.35 Configuring Binding Relationship with WAN Command function The WAN binding relationship configuration command is used to bind the configured WAN connection service profile with the appointed port of an ONU. Click the drop-down list to select the value. When Wan_D_S_P is Wan_PPPOE_Password set to PPPOE. Wan_Name The number of the PON port connected with the ONU. Click the — Compulsory select the value. The value includes cable service ports FE1 to FE4 and radio ports SSID1 to SSID4. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — — Read-only — The slot number of the EPON Slot No. corresponding Compulsory port in the LAN_Port_Select window that appears. PON No. Version: A drop-down list to select the The value range: cable service ports FE1 to FE4. right-click the appointed ONU in the ONU list tab at the right side of the GUI. 10-55 . Parameter Description The slot number of the card. Parameter Parameter Name ONU Slot No.10 GUI Reference of an EPON Terminal Access method Click an EPON interface card in the object tree pane. Double-click and Sets the ONU port that the configured WAN connection service profile is to be bound LAN_Port with. The Wan_Name configured in the WAN Service window. interface card containing the PON port connected with the ONU. and select Config → WAN Binding in the shortcut menu. Then the WAN Binding window will appear. radio ports SSID1 to SSID4. 1 Resetting an ONU Command function The resetting ONU command is used to restart the appointed ONU. The AN5006-07B. Applicable object The AN5006-04. 10-56 Version: A . right-click the appointed ONU in the ONU list tab at the right side of the GUI. The authorization number of the The value range is 1 to ONU. Then the Reset ONU window will appear.4. PON Port The number of the PON port The value range is 1 to No. 8. connected with the ONU. and the HG220 all support this command.AN5516-06 Optical Line Terminal Equipment GUI Reference 10. Access method Click an EPON interface card in the object tree pane. 64. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON OLT No.4 Control Command 10. and select Control Command → Reset ONU in the shortcut menu. ONU No. Read-only — Read-only — Read-only — ONU. interface card containing the The value range is 11 to PON port connected with the 16. 8.2 Refreshing Firmware Command function The refreshing firmware command is used to refresh the firmware of an ONU. connected with the ONU. Then the Restore ONU window will appear. and the HG220 all support this command. interface card containing the The value range is 11 PON port connected with the to 16. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Read-only — Read-only — Read-only — The slot number of the EPON OLT No. Applicable object The AN5006-04. ONU No.4. the AN5006-07B. Version: A 10-57 . Access method Click an EPON interface card in the object tree pane. PON Port The number of the PON port The value range is 1 to No. The authorization number of The value range is 1 to the ONU. When the firmware version upgrade operation fails. 64. users can execute this command to refresh the firmware. ONU.10 GUI Reference of an EPON Terminal 10. and select Control Command → Restore ONU in the shortcut menu. right-click the appointed ONU in the ONU list tab at the right side of the GUI. connected with the ONU. when the working optical line has faults. Access method Click an EPON interface card in the object tree pane. The authorization number of The value range is 1 to the ONU. the ONU supporting the protection switching function can switch to the protection optical line automatically. 8. interface card containing the The value range is 11 PON port connected with the to 16. Sometimes the manual switching is also needed. and select Control Command → Force Switch To Standby in the shortcut menu. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON OLT No. Users can execute the forced protection switching command to switch the service to the protection optical line without interrupting the carried service. PON Port The number of the PON port The value range is 1 to No.AN5516-06 Optical Line Terminal Equipment GUI Reference 10. ONU No. Read-only — Read-only — Read-only — ONU. 10-58 Version: A . Then the Force Switch To Standby window will appear.3 Performing Forced Protection Switching of an ONU Command function Generally.4. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Applicable object The AN5006-07B supports this command. 64. terminal. The authorization number of the terminal. and select Control Command → Force Register Again in the shortcut menu.10 GUI Reference of an EPON Terminal 10.4. Version: A interface card containing the The value range is 11 PON port connected with to 16. ONU No. Applicable object The HG220 supports this command. Access method Click an EPON interface card in the object tree pane. The value range is 1 to 64. Read-only — Read-only — 10-59 . users can excute the forcing-to-register-again command to force this terminal to register again. right-click the appointed terminal in the terminal list at the right pane. Then the Force Register Again window will appear Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON OLT No.4 Forcing to Register Again Command function If a certain terminal is unregistered. 64.AN5516-06 Optical Line Terminal Equipment GUI Reference 10. and select Get Information → OptModule Para Information in the shortcut menu. optical module voltage. bias current. port connected with the ONU.5 Get Information Command 10. Access method Click an EPON interface card in the object tree pane. Tx and Rx optical power.5. with the unit being km. The authorization The value range is 1 to number of the ONU.1 Viewing Optical Module Parameters Information Command function The viewing optical module parameters command is used to view optical module status parameters of an ONU. Optical module type (KM) 10-60 The value range is 1 to 8. Version: A . Then the OptModule Para Information window will appear. At present the 20 km optical module is used typically. ONU No. including optical module type. Applicable object The AN5006-04. the AN5006-07B. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the Slot No. EPON interface card The value range is 11 containing the PON port to 16. right-click the appointed ONU in the ONU list tab at the right side of the GUI. and the HG220 all support this command. optical module temperature. Read-only — Read-only — Read-only — Read-only — connected with the ONU. The number of the PON PON Port No. The value is 20. and select Get Information → PonPort Working State in the shortcut menu.10 GUI Reference of an EPON Terminal Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The temperature of the Temperature (C) current optical module The unit is ℃. Applicable object The AN5006-04. The bias current of the Current (mA) current optical module on the ONU. right-click the appointed ONU in the ONU list tab at the right side of the GUI. The Tx optical power of Tx power (Dbm) the current optical module on the ONU. Read-only — The unit is mA. Read-only — The unit is V. Then the PonPort Working State window will appear. Read-only — The unit is dBm. Read-only — The unit is dBm. The Rx optical power of Rx power (Dbm) the current optical module on the ONU. The voltage of the Voltage (V) current optical module on the ONU.5. the AN5006-07B. Access method Click an EPON interface card in the object tree pane.2 Viewing PON Port Operating Status Command function The viewing PON port operating status command is used to view the PON port operating status of an ONU. 10. and the HG220 all support this command. Version: A 10-61 . Read-only — on the ONU. 5. Viewing Wi-Fi Status Information Command function The viewing Wi-Fi status information command is used to view the enabling status and WPS Wi-Fi protection setting status of the radio interface of an ONU. PON Port The number of the PON port The value range is 1 to No. interface card containing the The value range is 11 PON port connected with the to 16. 64. Onu No. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Read-only — Read-only — Read-only — Read-only — ONU.3 The value range is 1 to 2. Then the WIFI Information window will appear. 8. Active PON Number The number of the current working PON port on the ONU.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No. connected with the ONU. 10. and select Get Information → WIFI Information in the shortcut menu. Access method Click an EPON interface card in the object tree pane. The authorization number of The value range is 1 to the ONU. Applicable object The HG220 supports this command. 10-62 Version: A . ONU No. Read-only — Read-only — Read-only — Fail / Succeed.4 Viewing WAN Connection Information Command function The viewing WAN connection information command is used to view the WAN connection status statistical information of the HG220. The enabling status of the Wi-Fi radio interface. Access method Click an EPON interface card in the object tree pane.5. right-click the appointed ONU in the ONU list tab at the right side of the GUI. 10. port connected with the ONU. The number of the PON PON No. The authorization number The value range is 1 to of the ONU. Version: A 10-63 . The Wi-Fi protection setting session status. Applicable object The HG220 supports this command. 64. and select Get Information → WAN Information Statistics in the shortcut menu. Read-only — Again / Normal Read-only — Disable / Enable Read-only — connected with the ONU. WPS-Status WPS-Overlap WLAN-Enable The value range is 1 to 8.10 GUI Reference of an EPON Terminal Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the Slot No. The Wi-Fi protection setting session triggering status. Then the WAN Information Statistics window will appear. EPON interface card The value range is 11 containing the PON port to 16. Static / PPPOE / DHCP Indicates whether the WAN connection enables Wan_Qos_Enable the QoS function for queue configuration and flow control. The name of the WAN connection. Wan_Vlan_ID Wan_COS The VLAN ID of the WAN connection. it Wan_Ip_Address means the configured static IP address of the WAN connection. and VLAN ID. The IP address Wan_D_S_P acquisition mode of the WAN connection. The value is Wan_Name composed of WAN connection index.1p priority of the The value range is 0 to WAN connection. Its The value range is 1 to value is assigned by the 99. Read-only — Read-only — Read-only — — Read-only — — Read-only — Read-only — Read-only — Enable / Disable Read-only — down / up Read-only — — Read-only — connected with the ONU. service type. The current connection Wan_Status status of the WAN network. The 802. EPON interface card The value range is 11 containing the PON port to 16. The index number of the Wan NO WAN connection. bridge mode. The value range is 1 to 8. When the value of Wan_D_S_P is Static.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the Slot No. OLT. 10-64 Version: A . port that is connected with the ONU. 7. The number of the PON ONU No. Applicable object The AN5006-04.5. Version: A 10-65 . it means the configured Wan_Slave_DNS slave DNS of the WAN connection. it means the configured Wan_Gateway default gateway of the WAN connection. When the value of Wan_D_S_P is Static. it means the configured Wan_Master_DNS master DNS of the WAN connection. When the value of Wan_D_S_P is Static.5 Obtaining ONU Port MAC Address Command function The obtaining ONU port MAC address command is used to view the MAC address learned by an ONU port. and the HG220 all support this command.10 GUI Reference of an EPON Terminal Parameter Name Parameter Description Value Range / Requirement Property Configuration Method When the value of Wan_D_S_P is Static. the AN5006-07B. Then the ONU Port MAC window will appear. 10. right-click the appointed ONU in the ONU list tab at the right side of the GUI. and select Get Information → ONU Port MAC in the shortcut menu. When the value of Wan_D_S_P is Static. it means the configured Wan_Ip_Subnet — Read-only — — Read-only — — Read-only — — Read-only — subnet mask of the WAN connection. Access method Click an EPON interface card in the object tree pane. indicating the service VLAN containing this MAC address.6 Viewing ONU Port Connected Equipment Type Command function The viewing ONU port connected equipment type command is used to view the type of the equipment set connected with the appointed port of an ONU. computer. interface card containing the The value range is 11 PON port connected with the to 16. 10. The authorization number of The value range is 1 to the ONU. 8. The VLAN ID of a MAC VLAN ID address. The value range is 0 to 24. Port No. Read-only — Read-only — Read-only — Read-only — — Read-only — — Read-only — — Read-only — ONU. 10-66 Version: A . PON Port The number of the PON port The value range is 1 to No. ONU No. connected with the ONU. and the HG220 all support this command.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No. The MAC address learned by the ONU port currently. 64. The type of the equipment set can be home gateway. Applicable object The AN5006-04.5. the AN5006-07B. MAC Number MAC The port number of the ONU. The quantity of MAC addresses learned by the ONU port currently. or no connection. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No. The authorization number of The value range is 1 to the ONU. The port number of the ONU. and select Get Information → Ports. 64. right-click the appointed ONU in the ONU list tab at the right side of the GUI. interface card containing the The value range is 11 PON port connected with the to 16.7 The value range is 0 to 24. Port No. The type of the equipment set State connected with the port of the ONU. Connected Device Type window will appear. and the HG220 all support this command. the AN5006-07B.5. Connected Device Type in the shortcut menu. 10. PON Port The number of the PON port The value range is 1 to No. Version: A 10-67 . HG Intelligent / PC / No Connection Viewing ONU Ranging Value Command function The viewing ONU ranging value command is used to view the ranging value between the ONU and the OLT. 8. Applicable object The AN5006-04.10 GUI Reference of an EPON Terminal Access method Click an EPON interface card in the object tree pane. connected with the ONU. ONU No. Then the Ports. Read-only — Read-only — Read-only — Read-only — Read-only — ONU. Testing POTS Port External Line Status Command function The testing POTS port external line status command is used to view the external voice line status of an ONU. and the POTS Outline Test window will appear.AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Click an EPON interface card in the object tree pane. 64. users can execute this command to perform line diagnosis. ONU No. with the unit being m. Then the ONU RTT Value window will appear. The authorization number of The value range is 1 to the ONU. When the voice line has faults. and select Get Information → Line Test in the shortcut menu.8 The value range is 0 to 65534. 10. right-click the appointed ONU in the ONU list tab at the right side of the GUI. 8. Applicable object The AN5006-04. 10-68 Version: A .5. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No. right-click the appointed ONU in the ONU list tab at the right side of the GUI. connected with the ONU. interface card containing the The value range is 11 PON port connected with the to 16. Access method Click an EPON interface card in the object tree pane. RTT Value The distance between the (m) ONU and the OLT. and the HG220 all support this command. and select Get Information → ONU RTT Value in the shortcut menu. the AN5006-07B. Then select the POTS Outline Test tab in the window that appears. PON Port The number of the PON port The value range is 1 to No. Read-only — Read-only — Read-only — Read-only — ONU. EPON interface card The value range is containing the PON port 11 to 16. reference. to 8. Refused The reason of the test being Reason refused. A -> ground DC Voltage (V) Version: A The DC voltage of telephone line A. Its value TestState includes Test Succeed and Test Refused. The authorization number of The value range is 1 the ONU. this test will be performed. to 64. The number of the PON port The value range is 1 connected with the ONU. Read-only — Read-only — Read-only — connected with the ONU. The number of the POTS The value range is 1 port to be tested. PON Port No. Compulsory the number of the POTS port to be tested. breakage / mixed line / line grounding bad / line interfere / line creepage / not hang up / short circuit. Double-click to type POTS Port No. conversation. The test status. TestType When Force is selected.10 GUI Reference of an EPON Terminal Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the Slot No. 10-69 . with the earth as the The unit is V. ONU No. no matter the subscriber is in Click the Force / Non-force Compulsory drop-down list to select the value. to 16. Selects the external line test mode of the POTS port. Test Succeed / Test Refused — Read-only — Read-only — Read-only — Read-only — Its values corresponding to the following port status items: normal / line insulation bad / line Port State The status of the port. with the (PF) earth as the reference. with the earth as the Voltage (V) telephone lines A and B. with the earth as the resistance (Ω) reference. Read-only — The unit is PF. Read-only — The unit is Ω. with the earth as the reference. B -> ground The capacitance of capacitance telephone line B. Read-only — The unit is Ω. Read-only — The unit is V. A -> B loop The total resistance of the AB resistance (Ω) loop. with the earth as the reference. Read-only — reference. The AC voltage of telephone line A. A -> ground The impedance of telephone insulation line A. Read-only — The unit is PF. The AC voltage of telephone line B. Read-only — The unit is PF. A -> B AC The AC voltage between Voltage (V) telephone lines A and B. Read-only — The unit is V. 10-70 Version: A . resistance (Ω) A -> ground The capacitance of capacitance telephone line A. The DC voltage between insulation Requirement Property The DC voltage of telephone A ->B DC A -> B Value Range / The impedance between telephone lines A and B. Read-only — The unit is Ω. with the earth as the resistance (Ω) reference. Read-only — The unit is V. with the (PF) earth as the reference. A -> B polarity reversal The polarity reversal insulation resistance.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name B -> ground DC Voltage (V) Parameter Description line B. B -> ground The impedance of telephone insulation line B. A -> B capacitance (PF) A -> ground AC Voltage (V) B-> ground AC Voltage (V) The capacitance between telephone lines A and B. resistance (Ω) Configuration Method The unit is V. Read-only — The unit is V. Read-only — The unit is Ω. Read-only — The unit is Ω. Access method Click an EPON interface card in the object tree pane. Force / Non-force Click the Compulsory drop-down list to select the value. range is 1 to 16. When TestType Force is selected.5. Parameter Parameter Name Parameter Description The slot number of the EPON Slot No. this test will be performed. ONU. interface card containing the PON port connected with the ONU.10 GUI Reference of an EPON Terminal 10. right-click the appointed ONU in the ONU list tab at the right side of the GUI. When the voice line has faults. Compulsory type the number of the POTS port to be tested. ONU Authorized The authorization number of the The value No. the AN5006-07B. Then select the POTS Inline Test tab in the window that appears. range is 1 to 64. Value Range / Requirement Configuration Method The value range is 11 to Read-only — Read-only — Read-only — 16. The number of the PON port The value connected with the ONU.9 Testing POTS Port Internal Line Status Command function The testing POTS port internal line status command is used to view the internal voice line status of an ONU. Applicable object The AN5006-04. Selects the internal line test mode of the POTS port. users can execute this command to perform line diagnosis. Version: A 10-71 . no matter the subscriber is in conversation. and select Get Information → POTS Inline Test in the shortcut menu. The number of the POTS port to The value be tested. Property Double-click to POTS Port No. and the HG220 all support this command. and the POTS Inline Test window will appear. PON Port No. range is 1 to 8. The telephone feed voltage Feeder voltage (V) value. The unit is HZ. Loop current State Test Succeed / Configuration — Test Refused. Read-only — The current dial tone status. Read-only — The unit is V. Read-only — The unit is V. Applicable object The AN5006-04. users can execute this command to perform line diagnosis. Read-only — The dial tone frequency value. Abnormal The current value in the loop formed after off-hook. and the HG220 all support this command. Abnormal Whether the loop current of the Normal / ONU voice port is normal.5. 10-72 Version: A . The unit is Loop current (A) A. Its value TestState Method Read-only — Read-only — Read-only — The unit is A. Signaltone level (DB) Signaltone frequency (HZ) Ringing current The ringing current voltage voltage (V) value. The unit is dB.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description The test status. FeederVoltageState Requirement Property Read-only includes Test Succeed and SignalToneState Value Range / Test Refused Normal / Abnormal The current status of the Normal / telephone feed voltage value. Read-only — The dial tone level value. the AN5006-07B. When the voice line has faults.10 Viewing NGN Statistical Information Command function The viewing NGN statistical information command is used to view the voice statistical information of an IAD. 10. Then select the NGN Statistic Info tab in the window that appears. 16. The number of the RTP voice bytes ReceivedRTPBytes received by the ONU from the media server or other MGs. and the NGN Statistic Info window will appear. Parameter Parameter Name Slot No. range is 1 to 8. The number of the RTP voice SendRTPPackets packets sent by the ONU to the media server or other MGs. The number of the request packets received by the ONU from the softswitch platform or other MGs. PON Port No. SendNGN RespPackets The number of the response packets sent by the ONU to the softswitch platform or other MGs. The number of the PON port The value connected with the ONU. ReceivedNGN ReqPackets Parameter Description Value Range / Requirement The slot number of the EPON The value interface card containing the PON range is 11 to port connected with the ONU. The authorization number of the ONU.10 GUI Reference of an EPON Terminal Access method Click an EPON interface card in the object tree pane. ONU Authorized No. The number of the response ReceivedNGN packets received by the ONU from RespPackets the softswitch platform or other MGs. Property Configuration Method Read-only — Read-only — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — The value range is 1 to 64. Version: A 10-73 . The number of the request packets SendNGNReqPackets sent by the ONU to the softswitch platform or other MGs. and select Get Information → NGN Statistic Info in the shortcut menu. The number of the RTP voice ReceivedRTPPackets packets received by the ONU from the media server or other MGs. right-click the appointed ONU in the ONU list tab at the right side of the GUI. the AN5006-07B. Bandwidth Usage — (kbit/s) The lost signaling packet number of the ONU sending and receiving LostSigPackets voice packets. RTPAvgJitterBuffer (ms) The average jitter delay of the ONU sending and receiving voice packets. The packet loss rate of the ONU sending and receiving voice PacketLoss (%) packets.5.11 Viewing NGN Port Statistical Information Command function The viewing NGN port statistical information command is used to view the voice statistical information of an ONU POTS port. The error signaling packet number of the ONU sending and receiving WrongSigPackets voice packets. 10-74 Version: A .AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The number of the RTP voice bytes sent by the ONU to the media SendRTPBytes — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — server or other MGs. and the HG220 all support this command. Applicable object The AN5006-04. When the voice line has faults. NetworkAvgDelay The network average delay of the (ms) ONU sending voice packets. The retransmitted signaling packet RetransmitPackets number of the ONU sending and receiving voice packets. The unknown signaling packet UnknownSigPackets number of the ONU sending and receiving voice packets. 10. users can execute this command to perform diagnosis. 10 GUI Reference of an EPON Terminal Access method Click an EPON interface card in the object tree pane. The average jitter delay of RTPJitterBuffer (ms) the ONU sending and receiving voice packets. The number of the RTP ReceivedRTPBytes voice bytes received by the ONU from the media server or other MGs. The number of the RTP SendRTPPackets voice packets sent by the ONU to the media server or other MGs. The number of the PON PON No. The value range is 1 to 8. and the NGN Port Statistic Info window will appear. The authorization number The value range is 1 of the ONU. The number of the RTP ReceivedRTPPackets voice packets received by the ONU from the media server or other MGs. port connected with the ONU. to 64. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Read-only — Read-only — Read-only — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — connected with the ONU. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the Slot No. The number of the ONU The value range is 1 voice port. to 16. EPON interface card The value range is containing the PON port 11 to 16. The number of the RTP SendRTPBytes voice bytes sent by the ONU to the media server or other MGs. and select Get Information → NGN Statistic Info in the shortcut menu. Version: A 10-75 . Then select the NGN Port Statistic Info tab in the window that appears. ONU No. ONU Port No. Applicable object The AN5006-04. 10-76 Version: A .AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Lastest Call Begin The start time of the latest Time call. and select Get Information → NGN Statistic Info in the shortcut menu. Access method Click an EPON interface card in the object tree pane. — Read-only — — Read-only — — Read-only — The total call duration of a (s) subscriber. right-click the appointed ONU in the ONU list tab at the right side of the GUI. UpstreamRate Requirement Property — The call times of a Total Call Times Value Range / The network average AvgNetworkDelay delay of the ONU sending (ms) voice packets. and the NGN Resource State window will appear. Then select the NGN Resource State tab in the window that appears.5. — Read-only — The downlink rate. and the HG220 all support this command. Lastest Call End The end time of the latest Time call. The packet loss rate of the ONU sending and PacketLoss (%) receiving voice packets. Last Call Duration (s) The current call duration. — Read-only — — Read-only — — Read-only — — Read-only — The uplink rate. DownstreamRate (kbit/s) Method — Total Call Duration (kbit/s) Configuration Read-only subscriber. the AN5006-07B. 10.12 Viewing NGN Resource Status Command function The viewing NGN resource status command is used to view the subscriber status of an ONU POTS port and the corresponding RTP resource information. Method Read-only connected with the ONU. Property Read-only 11 to 16. The number of the PON port ONU No. failed. Requirement The value range is — Read-only — Read-only — Read-only — Read-only — — Read-only — — Read-only — — Read-only — 1 to 8.10 GUI Reference of an EPON Terminal Parameter Parameter Name Parameter Description The slot number of the EPON interface Slot No.248 softswitch platform protocol is used. The value range is 2 to 16. Configuration — The value range is The authorization number of the ONU. registering. — The values correspond to the following status items: non-activated. dialing. on-hook. ring back tone. This item is valid only when the H. The name of the RTP resource used RTP Name by the POTS port. Telephone No. idle. card containing the PON port connected with the ONU. Reg Status The call status of the POTS port. and not on-hook for a long time. disconnected. PON No. busy. The POTS port number of the ONU. connecting. Value Range / The value range is 1 to 64. Version: A 10-77 . This item RTP Port is valid only when the H. The number of the RTP port. off-hook.248 softswitch platform protocol is used. connected. POTS No. The ID of the termination point. This Termination ID item is valid only when the H. ringing.248 softswitch platform protocol is used. The telephone number configured for the POTS port. but only 128 items can be displayed via the NGN RTP Resource command. 10-78 Version: A . 64. ONU No. EPON interface card The value range is 11 to containing the PON port 16.5. Applicable object The AN5006-04. and select Get Information → NGN Statistic Info in the shortcut menu. The name of the RTP resource. Access method Click an EPON interface card in the object tree pane. Read-only — Read-only — Read-only — connected with the ONU. and the NGN RTP Resource window will appear. the AN5006-07B. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Then select the NGN RTP Resource tab in the window that appears. Note: The AN5516-06 supports configuration of 6000 NGN RTP resource items. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the Slot No. The authorization number The value range is 1 to of the ONU. and the HG220 all support this command.13 Viewing NGN RTP Resource Configuration Command function The viewing NGN resource configuration command is used to view the RTP resource configuration information of an ONU. RTP Resource Name The value range is 1 to 8.AN5516-06 Optical Line Terminal Equipment GUI Reference 10. The number of the PON PON Port No. The first 128 — Read-only items are displayed. port connected with the ONU. A bridge with a Priority smaller priority value has a higher priority to be selected as the root bridge. Applicable object The AN5006-07B supports this command. 64. Bridge Max The maximum aging time of Age (s) the spanning tree bridge. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the Slot No. EPON interface card The value range is 11 to containing the PON port 16.10 GUI Reference of an EPON Terminal 10. Version: A 10-79 . and select Get Information → RSTP Bridge Info in the shortcut menu. 8. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Bridge Mac The MAC address of the Address RSTP bridge. The authorization number of The value range is 1 to the ONU. The priority of the bridge when the RSTP function is Bridge enabled.14 Viewing RSTP Bridge Information Command function The viewing RSTP bridge information command is used to view the RSTP bridge information of an ONU.5. ONU No. Then the RSTP Bridge Info window will appear. Read-only — Read-only — Read-only — — Read-only — — Read-only — — Read-only — connected with the ONU. connected with the ONU. Access method Click an EPON interface card in the object tree pane. PON Port The number of the PON port The value range is 1 to No. 1 to 8. 10. The RSTP mode currently. The authorization number of the The value range is ONU. right-click the appointed ONU in the ONU list tab at the right side of the GUI. PON Port The number of the PON port The value range is No.15 Viewing RSTP Port Information Command function The viewing RSTP port information command is used to view the RSTP information of an appointed ONU port. Port No. Parameter Description The slot number of the EPON interface card containing the PON port connected with the ONU.5. Applicable object The AN5006-07B supports this command. The priority of the port when the The value range is RSTP is enabled. Access method Click an EPON interface card in the object tree. ONU No. Value Range / Requirement The value range is 11 to 16. and select Get Information → RSTP Port Info in the shortcut menu. Property Configuration Method Read-only — Read-only — Read-only — Read-only — Read-only — Version: A . Then the RSTP Port Info window will appear. connected with the ONU. Port Priority 10-80 The port number of the ONU The value range is 1 to 24. A port with a 1 to 128. 1 to 64. Parameter Parameter Name ONU Slot No.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Bridge Hello Time (s) Force Version Parameter Description Value Range / Requirement Property Configuration Method The time interval between two successive Hello — Read-only — — Read-only — packets received. — Viewing Equipment Information Command function The viewing equipment information command is used to view the information of the HG220.5. The MAC address of the opposite end bridge. Its value includes: Selectable. not joining RSTP. at the opposite end bridge. It is a sum value. 1 to 128.10 GUI Reference of an EPON Terminal Parameter Name Parameter Description Value Range / Requirement Property Configuration Method smaller priority value is preferred to act as the root port. Read-only — Read-only — Read-only — — Read-only — — Read-only — — Read-only — Read-only — Read-only — Read-only — Appointed. 1 to 32768. 1 to 32768. Designated The priority of the appointed port The value range is Port Priority at the opposite end bridge. Port Path Cost Designated Root Priority Designated Root Mac Address Designated Path Cost The additional cost of the port passed by the data when the RSTP is enabled. The priority of the opposite end The value range is bridge port. The priority of the opposite end The value range is bridge. Root. The total sum of the lowest path costs to reach the appointed bridge. Version: A 10-81 . Port State The operating mode of the port. Designated Bridge Priority Designated Bridge MAC Address 10. Designated The number of the appointed port Port No. The value range is >0.16 The MAC address of the opposite end bridge. Backup. and Unknown. Then the Device Information window will appear. The ID information of the equipment. Access method Click an EPON interface card in the object tree pane. right-click the appointed ONU in the ONU list tab at the right side of the GUI. — Read-only — — Read-only — interface card containing the PON port connected with the ONU. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No.17 Querying MG Configuration Command function The querying MG configuration command is used to query the configuration information of the MG. ONU No. and select Get Information → Device Information in the shortcut menu.5. — Read-only — The hardware version number. — Read-only — — Read-only — — Read-only — The OUI of the manufacturer.AN5516-06 Optical Line Terminal Equipment GUI Reference Applicable object The HG220 supports this command. Applicable object 10-82 Version: A . — Read-only — The software version number. 10. DI-Serial The serial number of the Number equipment. DI-Model Name DI-Manufacturer OUI DI-Hardware Version DI-Software Version The authorization number of the ONU. 10 GUI Reference of an EPON Terminal The AN5006-04. The IP address of the standby softswitch platform. the AN5006-07B. — Read-only — Version: A 10-83 . The IP address of the SIP standby register server. MGID The ID of the MG. ONU Authorized The authorization number of No. Signal Svlan Tpid The signaling SVLAN TPID. Second SIP-Proxy The IP address of the SIP Server standby proxy server. The IP address of the SIP active register server. and SIP. First SIP-Proxy The IP address of the SIP Server active proxy server. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — ONU. The IP address of the active softswitch platform. MEGAGO. and the HG220 all support this command. — Read-only — Signal Svlan ID The signaling SVLAN ID. and select Get Information → MG Configuration Report in the shortcut menu. Then the MG Configuration Report window will appear. The value includes MGCP. PON Port No. Access method Click an EPON interface card in the object tree. The number of the PON port connected with the ONU. EID First MGCIP Second MGCIP First SIP Server Second SIP Server The gateway domain name. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No. The type of the softswitch ProtocolType platform protocol. the ONU. right-click the appointed ONU in the ONU list tab at the right side of the GUI. — Read-only — Signal Cvlan ID The signaling CVLAN ID. — Read-only — — Read-only — — Read-only — — Read-only — The user name for obtaining PPPoe name the IP address in PPPoE mode. RTP IP The media stream IP address. Alive Interval The heartbeat interval. The media stream SVLAN priority. The signaling gateway address. PPPoe password Keep Alive The password for obtaining the IP address in PPPoE mode. and DHCP. The enabling status of the heartbeat function. Signal IP Signal gateway The signaling IP address. Its value includes Static. — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — RTP Svlan Tpid RTP Svlan ID RTP Svlan COS RTP Cvlan Tpid RTP Cvlan ID RTP Cvlan COS The media stream SVLAN TPID. PPPoE. — Read-only — Alive Times The heartbeat test times. — Read-only — 10-84 Version: A . The media stream SVLAN ID. — Read-only — RTP gateway The media gateway address. The media stream CVLAN TPID.AN5516-06 Optical Line Terminal Equipment GUI Reference Value Range / Parameter Description Svlan COS The signaling SVLAN priority. — Read-only — Cvlan COS The signaling CVLAN priority. The media stream CVLAN priority. Requirement Property Configuration Parameter Name Method The IP address acquisition IP Mode mode. — Read-only — Signal Cvlan Tpid The signaling CVLAN TPID. The media stream CVLAN ID. Version: A 10-85 . The number of the PON Port No. The number of the The value range is 1 ONU port. Applicable object The AN5006-04. Port No.5. The transmission VoiceT38Enable mode of the fax — service. the AN5006-07B. and select Get Information → GET FAX/Modem Configuration in the shortcut menu. right-click the appointed ONU in the ONU list tab at the right side of the GUI. The authorization number of the ONU.10 GUI Reference of an EPON Terminal 10. PON port connected with the ONU. ONU Authorized No. card containing the — Read-only — — Read-only — — Read-only — Compulsory — Read-only — PON port connected with the ONU. Access method Click an EPON interface card in the object tree pane. Then the GET FAX/Modem Configuration window will appear. Parameter Parameter Name Parameter Value Range / Description Requirement Property Configuration Method The slot number of the EPON interface Slot No. to 32.18 Querying Parameter Configuration of Fax / Modem Service Command function The fax / modem service parameter configuration query command is used to query the related parameters of the fax / modem service of an ONU. and the HG220 all support this command. — The status includes the 10-86 Version: A . Applicable object The AN5006-04. The number of the ONU port.5. and select Get Information → NGN User Port Status in the shortcut menu. Property Read-only — Configuration Method — Querying ONU POTS Port Status Command function The querying ONU POTS port status command is used to query the current status of an ONU POTS port. Parameters Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No. Port No. The number of the PON port connected with the ONU. The current status of the Port Status subscriber port.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name VoiceFax/ModemControl 10. ONU Authorized No. Access method Click an EPON interface card in the object tree pane. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — Compulsory — Read-only — ONU. Then the NGN User Port Status window will appear. PON Port No. the AN5006-07B. The authorization number of the ONU. The value range is 1 to 64. right-click the appointed ONU in the ONU list tab at the right side of the GUI. and the HG220 all support this command.19 Parameter Value Range / Description Requirement The control mode of the fax data. 711A. 4. — Read-only — Tx Gain (dB) The Tx gain. The coding / decoding mode of the port. ring back tone.726. 5. Rx Gain (dB) The Rx gain. 3. 12. 10-87 . connected. 2. 10.38. — Read-only — SIP Telephone The SIP telephone number. ringing. G. — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — The current status of the subscriber port service. — Read-only — RTP Name The name of the RTP resource. 2. The password corresponding to the SIP subscriber port. terminating services locally. 3. releasing connection. terminating services automatically.729. 7. G. The polarity reversal signal enabling status. 8. Echo Cancel Reversed Polarity The echo suppression function enabling status. G. idle. Termination ID The ID of the termination point. and T. — Read-only — RTP Port The RTP port number. iadPortServiceCodecMode Includes G. connecting. The status includes the iadPortServiceState following items: 1. — Read-only — — Read-only — — Read-only — SIPUSERNAME SIPUSERPWD Version: A The user name corresponding to the SIP subscriber port. 6. G. disabled. 9. register failed. terminating services at the opposite end.723.10 GUI Reference of an EPON Terminal Parameter Name Parameter Description Value Range / Requirement Property Configuration Method following items: 1. normal. 4. other. off-hook.711U. dialing. registering. 11. Its unit is s. Access method Click an EPON interface card in the object tree pane. State The status includes the following items: test started — and test not started. 10-88 Version: A . and select Get Information → Simulation Command in the shortcut menu. ONU No. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Then the Simulation Command window will appear. Timeout The number of the PON port connected with the ONU. Applicable object The AN5006-04. Compulsory — Read-only — containing the PON port connected with the ONU. the AN5006-07B. Port No. PON No.20 Performing Emulation Command Command function The emulation command is used to detect the operating status of an ONU POTS port via the incoming / outgoing call emulation test.AN5516-06 Optical Line Terminal Equipment GUI Reference 10. — Read-only — The time-out duration of the The value range is 60 to incoming call test. and the HG220 all support this command. 300. The current test status.5. EPON interface card — Read-only — — Read-only — — Read-only — The number of the ONU port. The authorization number of the ONU. Parameter  Parameter Name Ingoing call simulation begin Parameter Description Value Range / Requirement Property Configuration Method The slot number of the Slot No. Read-only The current status of the port. The authorization number of the ONU. interface card containing the PON port — Read-only — — Read-only — connected with the ONU. Version: A Outgoing call simulation begin Parameter Description The slot number of the EPON interface Value Range / Requirement — Property Read-only Configuration Method — 10-89 . ringing. off-hook. call status is not confirmed.  Parameter Name Slot No. ringing. off-hook. Read-only Port No. Read-only ONU No. PON No. State The status includes the following items: idle. and test end. on-hook. connected. Conclusion The conclusion includes the following items: succeeded. ONU No. Read-only SS does not respond to the offhook signaling. Read-only PON No. — Read-only — — Read-only — The current status of the port. and test end. The reason of test failure. The number of the PON port connected with the ONU. The number of the ONU port. Ingoing call simulation end Parameter Description Property The slot number of the EPON interface card containing the PON port connected with the ONU. The number of the PON port connected with the ONU. State The status includes the following items: idle. — Read-only — Port No. The authorization number of the ONU. The number of the ONU port. failed. Fail Reason The reason includes the following items: no signaling interaction.10 GUI Reference of an EPON Terminal  Parameter Name Ingoing call simulation query Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON Slot No.  Parameter Name Slot No. The test conclusion of the incoming call emulation. called offhook. connected. Read-only on-hook. call has been Read-only set up. AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method card containing the PON port connected with the ONU. PON No. — Read-only — Port No. receiving. The current status of the port. PON No. — Read-only — Tel The calling telephone number. The authorization number of the ONU. — Read-only — receive end. The status includes the following items: — Read-only — State Idle. test end. ONU No. ringing-back. 10-90 Version: A .  Parameter Name Outgoing call simulation end Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON interface Slot No. card containing the PON port — Read-only — — Read-only — connected with the ONU. The value range is 60 to 300. State The status includes the following items: — test started and test not started. connected. The number of the PON port connected with the ONU. The number of the ONU port.  Parameter Name Outgoing call simulation query Parameter Description Value Range / Requirement Property Configuration Method The slot number of the EPON interface Slot No. Its unit is s. on-hook. card containing the PON port connected — Read-only — with the ONU. It should be a string. busy tone. The number of the PON port connected with the ONU. — Read-only — ONU No. Compulsory — Compulsory — Read-only — Timeout The time-out duration of the outgoing call test. The number of the ONU port. dial tone. The authorization number of the ONU. — Read-only — Port No. The current test status. off-hook. off-hook. MG Fail Reason internal reason. dial tone. Conclusion The conclusion includes the following items: succeeded. The reason includes the following items: The SS off-hook response signaling is not received.21 Querying ONU Capability Command function The querying ONU capability command is used to query the capability parameters of an ONU. receiving. the channel setup failure. the opposite end not off-hook. — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — receive end. failed. Parameter Description The number of the PON port connected with the ONU. The test conclusion of the outgoing call emulation. call has been set up. on-hook. the SS-transmitting dial tone signaling is not received. — Read-only — Port No. The reason of test failure. others. the SS does not respond to the on-hook signaling. busy tone. Version: A 10-91 . The number of the ONU port. TARGETNU The telephone number reported to the MBER softswitch platform. FAILEDSIG The signaling indication for test failure. 10. The status includes the following items: — Read-only — State Idle. DIALNUMB ER The dialed telephone number.5. test end. The current status of the port. connected. the dialed telephone number is not the same as the one reported to the SS. the ring back tone is not received. ringing-back. call status is not confirmed. Value Range / Requirement Property Configuration Method — Read-only — ONU No.10 GUI Reference of an EPON Terminal Parameter Name PON No. The authorization number of the ONU. The version number of the ONU firmware. Parameter Parameter Name Parameter Value Range / Description Requirement Property Configuration Method The slot number of the EPON interface Slot No. The value range is 0 to Double-click to type the ID of the chip. The version number of the ONU. The value can include up to 20 characters. The number of the PON Port No. Access method Click an EPON interface card in the object tree pane. and the HG220 all support this command. Then the ONU Ability window will appear. Port No. The equipment vendor ID1. The number of the ONU port. The equipment The value range is 1 to 24. Onu No. FirmWare ONU Verdor ID1 ONU Chipset ID ONU Version ONU Chip Date ONU Verdor ID2 10-92 The authorization number of the ONU. The production date of the ONU chip. right-click the appointed ONU in the ONU list tab at the right side of the GUI. the version number of the ONU. Double-click to type — Compulsory the production date of the ONU chip.AN5516-06 Optical Line Terminal Equipment GUI Reference Applicable object The AN5006-04. — Optional Double-click to type Version: A . PON port connected with the ONU. The AN5006-07B. The ID of the chip. card containing the — Read-only — — Read-only — — Read-only — Compulsory — Compulsory — — Read-only — — Compulsory PON port connected with the ONU. Double-click to type Compulsory 65534. and select Get Information → ONU Ability in the shortcut menu. The MAC address of the ONU. Double-click to type — Compulsory the MAC address of the ONU. unsupport. HGU. support C-Type Protection. The value includes SFU. Whether the ONU supports Multiple Click the drop-down LLIDs. MTU. Double-click to type — Compulsory the software version number. ONU Model ONU MAC Address Hardware Version Software Version The ONU model. SBU. The value includes — Compulsory list to select the value. SlotPlug MDU with Lan and DSL. The optical link protection type Click the drop-down supported by the Protection Type ONU. Multi LLID The value includes — Compulsory list to select the value. Huge SlotPlug MDU with DSL. Double-click to type — Compulsory the hardware version number. Box Style MDU with Lan. — Compulsory Double-click to type the ONU model. The equipment type of the ONU.10 GUI Reference of an EPON Terminal Parameter Name Parameter Value Range / Description Requirement Property vendor ID2. with DSL. Support Multi LLID and only Support Single LLID. ONU Type Small SlotPlug with Lan. Version: A 10-93 . BoxStyle MDU Click the drop-down — Compulsory list to select the value. The hardware version number. Configuration Method the equipment vendor ID2. The software version number. 65534. Capabilities-1. ONU Upstream Max Queue Number Queue Number The value When Capabilities the maximum quantity of uplink range is 0 to Ver is set to ONU quantity of uplink queques of the ONU. this parameter is valid. ONU Downstream the quantity of Optional. Version: A . ONU Upstream Queue The quantity of uplink Number queques of the ONU. The quantity of The value When Capabilities downlink queques of range is 0 to Ver is set to ONU the ONU. Capabilities Ver The value includes ONU Capabilities-1 Click the drop-down — Compulsory list to select the value. cards. The value range is 1 to 2. 65534. 10-94 the ONU. Double-click to type the quantity of downlink queques of the ONU. this parameter is valid. Compulsory service slots of an ONU which can accommodate accommodate cards. this queques of the parameter is valid. Capabilities-1. Max Queue Number uplink queques of Double-click to type parameter is valid. The maximum Optional. Capabilities-1. The Capabilities version. this The maximum The value When Capabilities quantity of downlink range is 0 to Ver is set to ONU queques of the ONU. The value When Capabilities range is 0 to Ver is set to ONU 65534.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Value Range / Description Requirement Property Configuration Method and support D-Type Protection. 65534. the number of uplink Compulsory PON ports supported by the ONU. ONU Downstream Double-click to type Double-click to type the quantity of downlink queques of the ONU. Double-click to type The number of uplink Num of PON IF PON ports supported by the ONU. Optional. Optional. Double-click to type the number of The number of Num of Slot service slots of an The value ONU which can range is 1 to 2. ONU. Capabilities-1. and ONU Capabilities-2. IPv6 Supported The value includes Click the drop-down — Compulsory list to select the value.USB. The type of the ONU interface. ONU Tx Power Supply Control Only. ONUSpeedCapability The value includes unsupport. support — Compulsory list to select the value. 8. 6. VoIP. — Read-only — — Read-only — — Read-only — 10G/1G. and 10G/10G. unsupport and support. WLAN. Click the drop-down The value includes ONU Backup Battery No ONU Backup — Compulsory list to select the value. ADSL2+. The value includes don’t support ONU ONUPowerSupplyCon trol Click the drop-down Power Supply Control. InterfaceType GE. Whether IPv6 is supported.10 GUI Reference of an EPON Terminal Parameter Name Parameter Value Range / Description Requirement Property Configuration Method The standby battery status of the ONU. 3. Num of Port Version: A The ports number of a 10-95 . The rate capability of the ONU. The power supply control capability of the ONU. 5. 7. 2. VDSL2+. 4. TDM. 9. The value includes: 1. and support both Tx and Rx Power Supply Control. FE.CATV RF. Battery and Has ONU Backup Battery. 1G/1G. PortBitMap 10-96 — Version: A . PortBitMapFlag The value includes PortBitMap valid and — Read-only — — Read-only — PortBitMap invalid. The PortBitMap flag.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Value Range / Description Requirement Property Configuration Method certain interface type. and the HG260 (home gateway ONU) as examples. Deauthorizing an ONU Configuration command Control command Get information command Version: A 11-1 .11 GUI Reference of a GPON Terminal This chapter discusses operation commands of a GPON terminal in detail. the AN5506-10-B1 (FTTB ONU). we take the AN5506-04-B (FTTH ONU). and includes the following sections. In this chapter. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON interface Slot No.AN5516-06 Optical Line Terminal Equipment GUI Reference 11. 11-2 Version: A . right-click the appointed ONU in the ONU list tab at the right side of the GUI. The authorization number of the ONU. Access method Click a GPON interface card in the object tree pane. with the ONU to be deauthorized.1 Deauthorizing an ONU Command function The deauthorizing ONU command is used to deauthorize an authorized ONU. Onu No. and select Deauthorize ONU in the shortcut menu. Applicable object The AN5506-04-B. Then the Deauthorize ONU window will appear. PON Port The number of the PON port connected No. Caution: This command can cause loss of configuration data on the ONU and interrupt services on the ONU. the AN5506-10-B1. and the HG260 all support this command. card containing the PON port connected — Read-only — — Read-only — — Read-only — with the ONU to be deauthorized. The authorization number of the ONU. voice service. Version: A 11-3 .2. and the HG260 all support this command. card containing the PON port connected — Read-only — — Read-only — — Read-only — with the ONU. Applicable object The AN5506-04-B.1 Configuring GPON Service Bandwidth Command function The GPON service bandwidth configuration command is used to configure bandwidth of various services on the ONU. and select Config → GPON Service Bandwidth Config in the shortcut menu.2 Configuration Command 11. Then the GPON Service Bandwidth Config window will appear. IPTV service. the AN5506-10-B1. and integrated service. The service types include broadband data service. ONU No.11 GUI Reference of a GPON Terminal 11. right-click the appointed ONU in the ONU list tab at the right side of the GUI. TDM service. PON Port The number of the PON port connected No. with the ONU. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON interface Slot No. Access method Click a GPON interface card in the object tree pane. value is 64. maximum The summation of the Fixed Bandwidth with the unit value and the assured Bandwidth value being kbyte/s. Double-click to Maximum Bandwidth (Kbyte/s) The maximum bandwidth assigned to the The value range type the designated uplink service on the ONU. Service Type IPTV: the multicast service. obtain. with the unit being assigned to the Compulsory kbyte/s. — Compulsory drop-down list to select the value. The guaranteed bandwidth that the assured Bandwidth (Kbyte/s) designated uplink service on the ONU can obtain. is 16 to 128000. TDM: the TDM service. TDM. and Integrate Service. 32 or guaranteed 128000. If the designated uplink service does not occupy the guaranteed bandwidth resource totally. IPTV. Fixed Bandwidth (Kbyte/s) The fixed bandwidth assigned to the The value range designated uplink service on the ONU. value is 16. other services can use it. Click the data: the unicast data service. uplink service on Compulsory bandwidth assigned to the the ONU. Double-click to The value range type the is 0. The bandwidth that the designated uplink service on default value is the ONU can 0. other services cannot occupy it The default either. resource. Double-click to type the fixed bandwidth Compulsory designated uplink service on the ONU. voip: the NGN voice service. Integrate Service: the management data or unicast data service. cannot exceed the value of Maximum The default designated Bandwidth. 11-4 Version: A . Even if the designated uplink service with the unit does not use the fixed bandwidth being kbyte/s. voip. The value includes data. is 16 to 128000.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The service type. including the service classification. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Click the Add button in the Data Port Config window to make the Services Configuration window appear. users can configure the parameters related to the data service on the ONU. Version: A 11-5 . Then click the Data Port Config tab in the window that appears. and select Config → Service Config in the shortcut menu. Applicable object The AN5506-04-B. In the Services Configuration window.2. Access method Click a GPON interface card in the object tree pane. and the Data Port Config window will appear. etc. and the HG260 all support this command.2 Configuring Data Service on a Port Command function The data port configuration command is used to configure the parameters related to the data service on each FE port of an ONU. the service type. the AN5506-10-B1.11 GUI Reference of a GPON Terminal 11. Select or clear the Compulsory Port Auto Negotiation button box. Value Range / Requirement — Property Read-only An FE port is enabled by Configuration Method — Select or clear the Compulsory default. auto negotiation function is disabled. disabled. Enables / disables the FE port. port is valid. When the port The duplex mode of the FE port. auto negotiation 100M. The flow control Flow Control Selecting the button box means function of a port Enable/Disable enabling the flow control function. Its Duplex value includes Full-duplex and — Half-duplex. of a port is disabled. port is valid. Enable/Disable Port button box. Enable/Disable When an FE port is enabled.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Data service parameter of the AN5506-04-B Parameter Name Port No. is disabled by and clearing the button box means default. 11-6 Version: A . this port will negotiation match its rate and duplex mode function of a port with other ports automatically. Optional. is enabled by When the auto negotiation function default. this Click the drop-down list to select the value. Enables / disables the port auto negotiation function. Port Speed The rate of the FE port. Port Auto Negotiation When the auto negotiation function The auto of a port is enabled. and function is 1000M. disabling the flow control function. Optional. users Port can configure the data service of this FE port. users need to set its rate and duplex mode. this Click the drop-down list to select the value. The value range When the port includes 10M. Select or clear the Compulsory Flow Control Enable/Disable button box. Enables / disables the flow control function of the FE port. Parameter Description The number of the FE port. valid. Optional. control function The unit is kbit/s. Version: A 11-7 . and Click the — Compulsory drop-down list to select the value. of the port is enabled. the ONU will add a VLAN tag for the data. When this parameter is set to Tag. them transparently. The tagging mode of the FE port. this parameter is Click to type the maximum rate of the downlink data on the FE port. When the rate Speed Limit The maximum rate of the uplink Up data on the FE port. valid. the equipment will translate the old tag from the ONU into the new VLAN tag. The VLAN mode of the data service. this parameter is Click to type the maximum rate of the uplink data on the FE port. is disabled by and clearing the button box means default. control function The unit is kbit/s. Select or clear the Compulsory Speed Limit Enable/Disable button box.11 GUI Reference of a GPON Terminal Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Enables / disables the rate control function of the FE port. Tag Its value includes Untag. When this parameter is set to CVLAN Mode transparent. Optional. the ONU does not process the data and transmits Click the — Compulsory drop-down list to select the value. disabling the rate control function. The flow control Speed Limit Selecting the button box means function of a port Enable/Disable enabling the rate control function. When this parameter is set to translation. When the rate Speed Limit The maximum rate of the downlink Down data on the FE port. TLS. Tag. of the port is enabled. valid. 1 to 4085. Priority or The priority of the data service on The value range COS the port. Click the — Compulsory drop-down list to select the value. clearing the button box means disabling the QinQ function. Enables / disables the QinQ function of the port.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Optional. Optional. It can Optional also be null. function is enabled. is 0 to 7. The value range: CVLAN ID The inner VLAN ID. Service Name 11-8 The local VLAN name corresponding to the service. this VLAN tag of the parameter is FE port. Selecting the button box means enabling the encryption function. When CVLAN COS The Ethernet priority of the FE port. Click to type the inner VLAN ID. The value range Mode is set to is 0 to 7. VLAN ID The VLAN tag of the FE port. The downlink Select or clear the data encryption Down function of a port Compulsory Encryption is disabled by Enable button default. Click the Compulsory drop-down list to select the value. Version: A . — is valid only Click to type the when the QinQ local VLAN ID. valid. and clearing the button box means disabling the encryption function. box. The value range: 1 to 4085. Optional. When Tag is set Click to type the to Tag. QinQ State Selecting the button box means enabling the QinQ function. Enables / disables the downlink Down Encryption Enable data encryption function of the port. Tag. This parameter SVLAN ID The local VLAN ID. this parameter is Click the drop-down list to select the value. and Select or clear the — Compulsory QinQ State button box. is enabled by When the auto negotiation default. disabled. includes 10M. When the auto negotiation Port Auto Negotiation function of a port is enabled. 100M. Value Range / Requirement — Property Read-only An FE port is enabled by Configuration Method — Select or clear the Compulsory default. and 1000M. Parameter Description The number of the FE port. Enable/Disable Port button box. this port is valid. Optional. Enables / disables the FE port. Data service parameter of the AN5506-10-B1 and the HG260 Parameter Name Port No. Version: A 11-9 . Optional. — auto Click the negotiation drop-down list to function is select the value. this The auto port will match its rate and duplex negotiation mode with other ports function of a port automatically. Duplex Its value includes Full-duplex and Half-duplex.11 GUI Reference of a GPON Terminal Parameter Name Parameter Description Priority or The inter-PON priority of the data COS service. The value range Port Speed The rate of the FE port. this port is valid. When the port auto Click the negotiation drop-down list to function is select the value. users need to set its rate and duplex mode. Enable/Disable When an FE port is enabled. Value Range / Requirement Property Configuration Method Click the — Compulsory drop-down list to select the value. disabled. Enables / disables the port auto negotiation function. When the port The duplex mode of the FE port. function of a port is disabled. users Port can configure the data service of this FE port. Select or clear the Compulsory Port Auto Negotiation button box. transparently. Version: A . unicast means the common data service. When this parameter is set to transparent. 1 to 65534. Is used to configure the VLAN Service Compulsory — the service classification setting. The flow control Flow Control Selecting the button box means function of a port Enable/Disable enabling the flow control function. Click to type the Compulsory TPID type of the VLAN. is disabled by and clearing the button box means default. the ONU does not process the data and transmits them transparently. Classification users can use If the CVLAN ID is null. When this parameter is set to tag. multicast means the IPTV service. If the CVLAN range of the data that are ID is null. TLS Enables / disables the TLS function. disabling the flow control function. TPID 11-10 The TPID type of the VLAN. and Click the — Compulsory drop-down list to select the value. and perform configuration in the Rule Define window that appears. Click the Service Classification button in the Services Configuration window. The value range: The default value is 33024. the system will transmit all are transmitted VLANs transparently. Users can select unicast or Service type multicast. — Compulsory drop-down list to select the value. this parameter to set the VLAN range of If the service classification is also the data that null. The VLAN mode of the data service. Click the the ONU will add a VLAN tag for CVLAN mode the data.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Enables / disables the flow control function of the FE port. The type of the data service. the system will transmit VLANs according to drop-down list to select the value. Click the — Optional. Select or clear Compulsory Flow Control Enable/Disable button box. transmitted transparently. function is enabled. Translation Selecting the button box means State enabling the translation function. users can assigned by the home gateway. When the system needs The inner VLAN ID. Enables / disables the translation function. Select or clear the — Compulsory Translation State button box. COS The priority of the service. This parameter is Translation value The post-translation VLAN ID. and clearing the button box means disabling the translation function. The value range is 0 to 7. In tag mode. to transmit the data service of a certain CVLAN ID Click to type the inner VLAN ID. Optional. disabling the QinQ function. users should type the inner VLAN ID The value range is 1 to 4085. and the value also can be set to null. configure this parameter. Version: A 11-11 .11 GUI Reference of a GPON Terminal Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Optional. Click the Compulsory drop-down list to select the value. — valid only when the translation Click to type post-translation VLAN ID. transparently. users should type the inner VLAN ID assigned by the CVLAN ID ONU. QinQ State Selecting the button box means enabling the QinQ function. In transparent mode. Enables / disables the QinQ function. and clearing the button box means Select or clear the — Compulsory QinQ State button box. Click to type the Service The minimum uplink bandwidth of Upstream the service. Maximum The default value is 100000 (unit: Allowed kbit/s). invalid. 11-12 — — — Compulsory Compulsory Compulsory minimum uplink bandwidth of the maximum uplink bandwidth of the downlink bandwidth of the service. the QinQ function when the QinQ the window that is disabled. function is enabled. Bandwidth The default value is 100000 (unit: (kbit/s) kbit/s). service. This Service Name The name of the local VLAN corresponding to the service. Minimum The default value is 640 (unit: Guaranteed kbit/s). function is enabled. also called local VLAN ID. Service The maximum uplink bandwidth of Click to type the Upstream the service. and this parameter is function is appears. Service The downlink bandwidth of the Click to type the Downstream service. Optional. service. — parameter is Click the valid only drop-down list to when the QinQ select the value. parameter is Name button. The OinQ profile is used when the This Click the Profile SVLAN is added at the ONU side. If users select to add the SVLAN — Optional. enabled. This SVLAN ID The SVLAN ID. Optional. Version: A . parameter is — only valid when the QinQ Click to type the SVLAN ID. and valid only select a profile in at the OLT side.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Profile Name Parameter Description Value Range / Requirement Property Configuration Method The name of the QinQ profile. the AN5506-10-B1. and the Voice Config window will appear.3 Configuring Voice Service on a Port Command function The voice port configuration command is used to configure the parameters related to the voice service on each FE port of an ONU. Version: A 11-13 .11 GUI Reference of a GPON Terminal 11.2. and select Config → Service Config in the shortcut menu. voice port needing the service — Read-only — configuration. configured in the NGN Configuration window. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Access method Click a GPON interface card in the object tree pane. and the HG260 all support this command. The telephone number corresponding to the port. Applicable object The AN5506-04-B. Parameter Parameter Parameter Value Range / Name Description Requirement Property Configuration Method The number of the Port No. Phone Its value should be Number the same as the telephone number Click to type — Compulsory the telephone number. Then click the Voice Config tab in the window that appears. CodecMode Its value includes — Compulsory drop-down list to select the value. SS. The transmission Click the mode of the DTMF DTMF Mode signal. The control mode of Fax Control Mode Its value includes PassThrough. transparent and RFC2833. — Compulsory drop-down list to select the value. both be set to the inner CVLAN ID value.38. transparent and T. The transmission Click the mode of the fax Fax Mode service. In single-tagged VLAN mode and Signal QinQ mode. G.729. and Auto VBD. Its value includes — Compulsory drop-down list to select the value. and G. 11-14 Click the the fax data.711A.711U. The coding and Click the decoding rule of the Voice voice service.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Value Range / Name Description Requirement Property Configuration Method The CVLAN ID. Compulsory Click to type the CVLAN ID.723. G. G. Its value includes — Compulsory drop-down list to select the value. this The value range is 1 to VLAN ID parameter should 4085. Version: A . is enabled. silence compression function. and users can — Compulsory the QinQ State button box. the QinQ function is enabled. Compulsory the output gain of the voice stream. Click to type Output Gain The output gain of The value range: -32 to the voice stream. When the QinQ Select or clear State button box is QinQ State selected. Enables / disables the QinQ function. Users can select the Select or clear SlienceSp button SlienceSp box to enable the — Compulsory the SlienceSp button box. The default value is 0. The default value is 0. The purpose is to reduce the mute frames in the line and save bandwidth. Enables / disables the silence compression function. Click to type Input Gain The input gain of the The value range: -32 to voice stream. 32. Version: A 11-15 . 32. the echo in the conversation can be eliminated. configure the SVLAN and priority. Compulsory the input gain of the voice stream.11 GUI Reference of a GPON Terminal Parameter Parameter Value Range / Name Description Requirement Property Configuration Method Enables / disables the echo suppression Echo Cancel Select or clear function. After the echo — Compulsory suppression function the Echo Cancel button box. Property Configuration Method Optional. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Click the This parameter is valid only drop-down list when the QinQ function is to select the enabled. Applicable object The AN5506-04-C supports this command. Configuring CATV Service on a Port Command function The voice port configuration command is used to configure the parameters related to the CATV service on the CATV port of an ONU.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Value Range / Name Description Requirement Svlan State Outer COS Inner COS The SVLAN ID of the voice service. The value range: 0 to 7. Optional. value. Access method Click a GPON interface card in the object tree pane. Parameter Parameter Name Parameter Description CATV Enables / disables the CATV Enable/Disable service.4 — The value range: 0 to 7. 11-16 Property Compulsory Configuration Method Select or clear the CATV Enable/Disable button box. Optional. The priority of the inner VLAN. Version: A . The priority of the outer VLAN. Click to type This parameter is valid only the SVLAN ID when the QinQ function is of the voice enabled service. 11. Then click the CATV Config tab in the window that appears. value.2. Click the This parameter is valid only drop-down list when the QinQ function is to select the enabled. and the CATV Config window will appear. and select Config → Service Config in the shortcut menu. interface card containing the PON port connected with the — Compulsory GPON interface card containing the PON port connected with the ONU. Double-click to type the — Compulsory ONU authorization number.5 Configuring Multicast Service on an ONU Command function The ONU multicast service configuration command is used to configure the downlink multicast data stream VLAN and uplink / downlink multicast protocol message VLAN passing through an ONU.11 GUI Reference of a GPON Terminal 11. The FE port number of the ONU. — Compulsory number of the PON port connected with the ONU. ONU No. Applicable object The AN5506-04-B supports this command. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Double-click to type the slot number of the The slot number of the GPON Slot No. and select Config → ONU IGMP Config in the shortcut menu. ONU. Version: A The authorization number of the ONU. connected with the ONU. right-click the appointed ONU in the ONU list tab at the right side of the GUI. — Read-only — 11-17 . Access method Click a GPON interface card in the object tree pane. Then the ONU IGMP Config window will appear. Double-click to type the PON Port The number of the PON port No. Port No.2. Double-click to type the Compulsory VLAN ID of the downlink multicast data stream. Its value includes UNTAG and TAG. The VLAN ID of the downlink multicast data stream. TAG: Means that the downlink multicast data stream passing through this ONU port is tagged with the appointed VLAN tag. 11-18 Double-click to type the The value range is 0 to 7. UNTAG: Means that the IGMP downlink multicast data VLAN stream passing through this Mode ONU port is untagged. and 7 means the highest priority. multicast data stream with the appointed VLAN ID. It IGMP means that this ONU port The value range is VLAN only receives the downlink 1 to 4085. The VLAN priority of the IGMP COS downlink multicast data stream. Compulsory VLAN priority of the downlink multicast data stream. Version: A . 0 means the lowest priority.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The VLAN mode of the downlink multicast data stream. — Compulsory Click the drop-down list to select the value. to TAG or RETAG. uplink multicast protocol this parameter is message. and 7 means the value is 7. and REMOVE. multicast protocol this parameter is message. The VLAN priority of the IGMP Up uplink multicast protocol The value range is Protocol message. RETAG indicates that the system replaces the VLAN tag of the uplink / downlink multicast protocol message with a new VLAN tag. highest priority. REMOVE indicates that the system strips the VLAN tag of the uplink / downlink multicast protocol message. Version: A If IGMP Protocol Double-click to type the VLAN Mode is set VLAN priority of the to TAG or RETAG. IGMP Up The VLAN ID of the uplink Protocol multicast protocol message. TRANSPARENT indicates that the uplink / downlink multicast protocol message is IGMP Protocol VLAN Mode transmitted transparently. 11-19 . Optional. RETAG. The default COS priority. Its value includes TRANSPARENT. VLAN If IGMP Protocol Double-click to type the The value range is VLAN Mode is set VLAN ID of the uplink 1 to 4085. Optional. TAG indicates that a VLAN tag is added to the uplink / — Compulsory downlink multicast protocol Click the drop-down list to select the value.11 GUI Reference of a GPON Terminal Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The VLAN mode of the uplink / downlink multicast protocol message passing through the ONU port. valid. message. 0 means the lowest 0 to 7. valid. TAG. Configuring Wi-Fi Service Command function The Wi-Fi service configuration command is used to configure the Wi-Fi service parameters of an ONU or home gateway. 11-20 Version: A . VLAN valid. right-click the appointed ONU in the ONU list tab at the right side of the GUI. to TAG or RETAG. 0 means the lowest priority. highest priority.6 valid. 11. Access method Click a GPON interface card in the object tree pane.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Optional. IGMP If IGMP Protocol Double-click to type the Down The VLAN ID of the downlink The value range is VLAN Mode is set VLAN ID of the downlink Protocol multicast protocol message. and 7 means the If IGMP Protocol Double-click to type the The value range is VLAN Mode is set VLAN priority of the 0 to 7. to TAG or RETAG. Applicable object The HG260 supports this command.2. downlink multicast this parameter is protocol message. multicast protocol this parameter is message. The VLAN priority of the downlink multicast protocol message. Then the WiFi Service Config window will appear. and select Config → WiFi Service Config in the shortcut menu. 1 to 4085. IGMP Down Protocol COS Optional. 11-21 . Version: A Click the Optional drop-down list to select the value. set to Enable. Compulsory. The wireless IGD-WLAN-COUNTRY communication Its value includes ETSI standard used and ATSI. service. interface card containing the — Read-only — — Read-only — — Read-only — PON port connected with the ONU. The default value is Enable.11 GUI Reference of a GPON Terminal Parameters Parameter Name Parameter Value Range / Description Requirement Property Configuration Method The slot number of the GPON Slot No. Enables or IGD-WLAN-APModuleEnable disables the Wi-Fi service. The ONU NO authorization number of the ONU. The following parameters are valid only when this parameter is Click the drop-down list to select the value. The default by the Wi-Fi value is ETSI. The number of PON Port No. Its value includes Enable and Disable. the PON port connected with the ONU. 11g.11bgn. 802.11bgn. The Tx power IGD-WLAN-POWER (dBm) of the wireless signal. assigned by the — Read-only — system automatically. It is SSID No. the value range of this IGD-WLAN-CHANNEL parameter is 0 to 13. parameter is 0 to 11. 802. The SSID number. 11-22 Version: A . signal. with the unit being dBm. Double-click to The value range is 0 to 20.11n.11b. The default value type the Tx Optional power of the wireless is 20. default value is 802. The Optional drop-down list to select the value. the service.11b/g. Its value includes Click the 802. 802.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Value Range / Description Requirement Property Configuration Method When IGD-WLAN-COUNTRY is set to ETSI. Selects the type of the IGD-WLAN-STANDARD wireless communication standard. number of the Optional wireless and it indicates that the system selects the number of the wireless channel automatically. the occupied by the value range of this channel service. occupied by The default value is 0. Double-click to The number of When type the the wireless IGD-WLAN-COUNTRY channel is set to ATSI. and 802. Its value includes Enable and Disable. The following parameters are valid only when this parameter is Click the drop-down list to select the value. authentication can access the corresponding network. Version: A 11-23 . Optional Double-click to type the SSID. Optional.11 GUI Reference of a GPON Terminal Parameter Name Parameter Value Range / Description Requirement Property Configuration Method The SSID (service set identifier). It is used to distinguish different networks. set to Enable. Enables or IGD-WLAN-ENABLE disables the SSID function. The default value is Enable. meaning the name of the WLAN. and the unauthorized subscribers are prohibited from accessing the corresponding network. Only the subscribers IGD-WLAN-SSID passing the The maximum length is identity 32 characters. AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Value Range / Description Requirement Property Configuration Method Selects whether the SSID is hidden. a IGD-WLAN-SSIDHide subscriber Its value includes cannot find the Non-hide and Hide. default value is WPAPSK. When the WLAN Click the Optional drop-down list to select the value. and WPA2PSK. If the SSID is hidden. this parameter can be set to TKIP. Click the OPEN. WPAPSK. authentication mode is WPAPSK or WPA2PSK. SHARED. 11-24 Version: A . The Optional drop-down list to select the value. but can Non-hide. When the WLAN authentication mode is OPEN. Its value includes The WLAN IGD-WLAN-AuthMode authentication mode. and TKIPAES. Click the Optional drop-down list to select the value. access the wireless network via configuring the SSID manually. set to WEP. this parameter can be set to NONE and WEP. AES. When the WLAN authentication mode is IGD-WLAN-Encrypt The WLAN SHARED. SSID via his / The default value is her PC. this encryption parameter can only be type. The WLAN WPA is the IGD-WLAN-PresharedKey improved The maximum length is version of the 64 characters. enhances the this parameter key protection Double-click to type the pre-shared key of the WPA encryption mode. 11-25 . When the The time IGD-WLAN-WPAReKey Interval (s) interval to modify the pre-shared key of the WPA. encryption When the mode. IGD-WLAN-WEPEncryptionLevel The length of (bit) the WEP key.11 GUI Reference of a GPON Terminal Parameter Name Parameter Value Range / Description Requirement Property Configuration Method The pre-shared key of the WPA Optional. The default value is 86400. and it authentication mode is WPAPSK or WPA2PSK. and the 802. IGD-WLAN-WEPKey Index WLAN-WEPKey 1 WLAN-WEPKey 2 Version: A The number of the WEP key. The 2nd WEP key. The value range is 0 to 4194303. is valid. The IP address RADIUS-Server of the RADIUS — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — server. WLAN authentication mode is WPAPSK or WPA2PSK. with the unit beings. is valid. Optional. The 1st WEP key. The port of the RADIUS-Port RADIUS server. this parameter Double-click to type the time interval to modify the pre-shared key of the WPA.1x protocol. The password RADIUS-Key of the RADIUS server. WEP. right-click the appointed ONU in the ONU list tab at the right side of the GUI. and select Config → WAN Service in the shortcut menu. — Read-only — — Read-only — Configuring TL1 Interface WAN-Connected Service Command function The TL1 interface WAN-connected service configuration command is used to configure the profile of the WAN-connected service and set parameters such as WAN connection mode.2. th The 4 WEP WLAN-WEPKey 4 11.7 key. 11-26 Version: A .AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Value Range / Description Requirement Property Configuration Method rd The 3 WEP WLAN-WEPKey 3 key. Then the WAN Service window will appear. Access method Click a GPON interface card in the object tree pane. Applicable object The HG260 supports this command. Its value includes Route and Bridge. port connected with the ONU. and Other. It is generated automatically by the equipment according to WAN Index the generation sequence of the WAN connection in increment order. ONU NO The authorization number of the ONU. The number of the PON PON Port No. The generation rule is WAN_Name number_key word_bridge or route mode_ PVC / VLAN information. Click the — Compulsory drop-down list to select the value.11 GUI Reference of a GPON Terminal Parameter Parameter Name Parameter Value Range / Description Requirement Property Configuration Method The slot number of the GPON interface card Slot No. The name of the WAN connection. The WAN connection WAN_Conn_Type type. 11-27 . The WAN connection mode. Version: A Click the — Compulsory drop-down list to select the value. WAN_Mode Its value includes TR069. containing the PON port — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — connected with the ONU. TR069_INTERNET. INTERNET. this address of the parameter is WAN connection. it means the subnet mask. Optional. When Wan_D_S_P is Wan_Ip_Address set to Static. When When Wan_D_S_P is Wan_Subnet set to Static. — Wan_D_S_P is set to Static. it means — the static IP address.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Value Range / Description Requirement Property Configuration Method Its value should use the WAN_Vlan_Id CVLAN ID value The value range: configured in the 1 to 4085. or 0xffff (indicating null). type the 802. Config window. NAT function. and PPPOE. 11-28 Version: A . Optional. valid. The default box in the Data Port value is 0xffff. DHCP. this parameter is Click the drop-down list to select the value. is 0xffff. The value range: WAN_CoS The 802. Static. Its value includes Click the — Compulsory drop-down list to select the value. Compulsory The default value Enables / disables the WAN_NAT_Enable The default value is priority of the WAN connection. or Services 0xffff (indicating Configuration dialog null). valid.1p Click the — Compulsory drop-down list to select the value.1p priority of the WAN connection. The mode of the WAN connection obtaining Wan_D_S_P the IP address. Double-click to Compulsory type the parameter value. When Double-click to Wan_D_S_P is type the static IP set to Static. Double-click to 0 to 7. Enable. this DNS of the WAN parameter is connection. of the PPPoE this parameter is connection. When Double-click to Wan_D_S_P is type the password set to PPPOE. valid. this DNS of the WAN parameter is connection. this parameter is valid.11 GUI Reference of a GPON Terminal Parameter Name Parameter Value Range / Description Requirement Property Configuration Method Optional. The maximum length is 32 characters. When Wan_D_S_P is Wan_Slave_DNS set to Static. When Wan_D_S_P is Wan_Master_DNS set to Static. valid. Optional. Click the drop-down list to select the value. Version: A 11-29 . it means the user name of the connection. When Enables / disables the Wan_PPPOE_Proxy PPPoE proxy function. Optional. it means — the slave DNS. When Double-click to Wan_D_S_P is type the slave set to Static. it means the password of the connection. valid. The maximum length is 32 characters. this parameter is Disable. The default value is — Wan_D_S_P is set to PPPOE. When Double-click to Wan_D_S_P is type the default set to Static. When Wan_D_S_P is Wan_Gateway set to Static. this gateway of the parameter is WAN connection. When Wan_D_S_P is Wan_PPPOE_Password set to PPPOE. Optional. Optional. valid. When Wan_D_S_P is Wan_PPPOE_Username set to PPPOE. it means — the master DNS. Double-click to type the user name of the PPPoE connection. When Double-click to Wan_D_S_P is type the master set to Static. valid. it means — the default gateway. When Wan_D_S_P is set to PPPOE. Optional. The maximum length is 32 characters. When When Wan_D_S_P is Wan_PPPOE_MODE set to PPPOE. valid. Optional. When Wan_D_S_P is set to PPPOE. valid. The value includes radio ports SSID1 cable service ports FE1 to SSID4. Enables / disables the QoS function of the Wan_Qos_Enable WAN connection. Click the — Compulsory The default value is drop-down list to select the value. — mode is set to transparent. SSID1 to SSID4 connection service The value range: profile is to be bound cable service with. to FE4 and radio ports SSID1 to SSID4. ports FE1 to FE4. it means — the connecting mode. When Wan_D_S_P is Wan_PPPOE_NAME set to PPPOE. Optional. Its value includes tag and Click the — Compulsory drop-down list to select the value. Sets the ONU port that the configured WAN FE1 to FE4. Disable. Select the Compulsory corresponding port. The VLAN operation VLAN mode mode. valid. this parameter is Click the drop-down list to select the value. When VLAN Translation State Enables / disables the translation function. transparent. it means the PPPoE service name. this parameter is Double-click to type the PPPoE service name. Wan_D_S_P is set to PPPOE. this parameter is Click the drop-down list to select the value. 11-30 Version: A .AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Value Range / Description Requirement Property Configuration Method Optional. Then the ONU manage VLAN window will appear. transparent and Translation State is set to Enable. Version: A 11-31 . 11.8 Configuring Management VLAN of an ONU Command function The ONU management VLAN configuration command is used to set the parameters related to the management VLAN of an ONU.2.11 GUI Reference of a GPON Terminal Parameter Name Parameter Value Range / Description Requirement Property Configuration Method Optional. parameter is valid. is 1 to 4085. right-click the appointed ONU in the ONU list tab at the right side of the GUI. transparent and Click the Translation drop-down list to State is set to select the value. and select Config → ONU manage VLAN in the shortcut menu. Optional When VLAN mode is set to The translation priority. this parameter is valid. When VLAN mode is set to Translation Value The post-translation The value range VLAN ID. Enable. Access method Click a GPON interface card in the object tree pane. this Double-click to type the post-translation VLAN ID. COS The value range is 0 to 7. Applicable object The HG260 supports this command. Compulsory type the ID of the management SVLAN. 4085. GE1. Compulsory Is value includes All. ONU No. and GE2. The number of the PON port connected with the ONU. type the name of Click the — Compulsory drop-down list to select the value. Tpid The default value is 33024. drop-down list to select the value. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — — Read-only — ONU. Manage The TPID of the management SVLAN SVLAN. Double-click to The value range: 1 to 65534. PON No. The name of the management Name VLAN. Compulsory type the ID of the management VLAN. Version: A . Port No. The tagging property of the the management VLAN.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No. The number of the management SN VLAN. Double-click to Manage The ID of the management The value range: 1 to SVLAN Id SVLAN. Double-click to ManageID The ID of the management VLAN. Double-click to The maximum length is16 characters. Compulsory type the TPID of the management SVLAN. The uplink port of the ONU. Click the — Compulsory Tag/Untag management VLAN. Manage SVLAN CoS 11-32 Double-click to The priority of the management SVLAN. The default value is manager. It is generated automatically. Compulsory type the priority of the management SVLAN. PON. The value range: 1 to 4. The authorization number of the ONU. The value range: 0 to 7. Double-click to type the gateway The gateway of the in-band Gateway network management port on — Compulsory the ONU.11 GUI Reference of a GPON Terminal Parameter Name Manage CVLAN Tpid Parameter Description Value Range / Requirement Property Configuration Method Double-click to The TPID of the management The value range: 1 to CVLAN. The value range: 0 to 7. Double-click to Manage The ID of the management The value range: 1 to CVLAN Id CVLAN. 4085. Double-click to type the IP The IP address of the in-band Ip addr network management port on — Compulsory the ONU. Version: A 11-33 . 11. Compulsory type the ID of the management CVLAN.2. Click the — Compulsory drop-down list to select the value. Compulsory type the TPID of the management CVLAN. of the in-band network management port on the ONU. Applicable object The AN5506-04-B and the AN5506-10-B1 support this command. address of the in-band network management port on the ONU. Compulsory type the priority of the management CVLAN. Mask The mask of the in-band network management port on the ONU. Manage CVLAN CoS Double-click to The priority of the management CVLAN.9 Configuring Voice Media Stream Command function The voice media stream configuration command is used to configure the related parameters of the voice media stream. 65534. AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Click a GPON interface card in the object tree pane. Optional. right-click the appointed ONU in the ONU list tab at the right side of the GUI. ONU No. When RTP SVLAN Tpid The TPID of the service VLAN. RTP Enables / disables the RTP Config configuration function. 65534. 4085. Optional. When RTP SVLAN Id The service VLAN ID. 4088. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — ONU. and select Config → ONU NGN Config → Voice RTP Config in the shortcut menu. this parameter is Double-click to type the service VLAN ID. Service Users should use the name of a Name service VLAN configured in the Click the — Compulsory drop-down list to select the value. The name of the voice media Voice RTP stream service. valid. Enable. this parameter is Double-click to type the TPID of the service VLAN. Then the Voice RTP Config window will appear. also called The value range: 1 to Config is set to SVLAN ID. The authorization number of the ONU. The number of the PON port connected with the ONU. HSWA card configuration GUI. valid. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No. 11-34 Version: A . Pon No. The value range: 1 to Config is set to 65534. Enable. Click the — Compulsory drop-down list to select the value. When RTP Double-click to The value range: 1 to Config is set to type the TPID of 65534. 4085. Optional. When RTP CVLAN Id The customer VLAN ID. Enable. Config is set to Enable. this the customer parameter is VLAN. 65534. Optional. RTP The destination IP address of the Ipaddr RTP voice media stream. Enable.11 GUI Reference of a GPON Terminal Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Optional. valid. valid. Version: A 11-35 . Optional. this parameter is Double-click to type the customer VLAN ID. Double-click to When RTP type the Config is set to destination IP Enable. valid. CVLAN The priority of the customer CoS VLAN. also The value range: 1 to Config is set to called CVLAN ID. Optional. The value range: 0 to 7. this the customer parameter is VLAN. — Config is set to Enable. this address of the parameter is RTP voice media valid. this parameter is Double-click to type the priority of the service VLAN. When RTP RTP Mask The address mask of the RTP stream. The value range: 0 to 7. When RTP SVLAN CoS The priority of the service VLAN. CVLAN Tpid The TPID of the customer VLAN. valid. valid. 4088. this parameter is Click the drop-down list to select the value. — Optional. When RTP Double-click to Config is set to type the priority of Enable. stream. 11-36 The number of the PON port connected with the ONU.2. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No. and select Config → ONU NGN Config → POS Phone Number in the shortcut menu. The authorization number of the ONU. Pon No. right-click the appointed ONU in the ONU list tab at the right side of the GUI. 11.10 Configuring POS Telephone Number Command function The POS telephone number configuration command is used to configure the POS telephone number. Then the POS Phone Number window will appear. Applicable object The AN5506-04-B and the AN5506-10-B1 support this command. Access method Click a GPON interface card in the object tree pane. valid. Version: A .AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Optional. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — ONU. ONU No. RTP The gateway address of the RTP Gateway stream. — When RTP Double-click to Config is set to type the gateway Enable. this address of the parameter is RTP stream. interface card containing the PON port connected with the — Read-only — — Read-only — ONU. 11-37 . Version: A The number of the PON port connected with the ONU. Pon No. Applicable object The AN5506-04-B and the AN5506-10-B1 support this command. 0123456789abcdABCD *#. POS Type The POS processing mode. right-click the appointed ONU in the ONU list tab at the right side of the GUI.11 GUI Reference of a GPON Terminal Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The maximum length is Double-click to 20 characters. 11. The value range is including eight values. and the POS Phone Number The POS telephone number. Access method Click a GPON interface card in the object tree pane. Configuring Intelligent Public Telephone Number Command function The intelligent public telephone number configuration command is used to configure the intelligent public telephone number. Then the IPT Phone Number window will appear. Type A to Type H.2.11 Click the Compulsory drop-down list to select the value. allowed characters set is Compulsory type the POS telephone number. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No. and select Config → ONU NGN Config → IPT Phone Number in the shortcut menu. Then the Port loopback window will appear. and the IPT Phone The intelligent public telephone allowed characters set Number number. 11-38 Version: A . Value Range / Requirement — Property Read-only Configuration Method — The maximum length is Double-click to 20 characters. right-click the appointed ONU in the ONU list tab at the right side of the GUI. The loopback direction is from the appointed port of the ONU to the OLT side. 11. and the HG260 all support this command. and select Config → ONU Port Loopback in the shortcut menu. Applicable object The AN5506-04-B.12 The value range is Type A to Type H. the AN5506-10-B1. The intelligent public telephone IPT Type processing mode. including eight values. Access method Click a GPON interface card in the object tree pane. Click the Compulsory drop-down list to select the value.2. Configuring ONU Port Loopback Command function The ONU port loopback configuration command is used to enable the loopback function of an ONU port. is Compulsory type the intelligent public telephone number. Parameter Description The authorization number of the ONU.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name ONU No. 0123456789abcdABCD *#. 2.13 The default value is Disable. Click the Compulsory drop-down list to select the value. interface card containing the PON — Read-only — — Read-only — — Read-only — — Read-only — port connected with the ONU. the communications between its ports are disabled.11 GUI Reference of a GPON Terminal Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No. and the collision domains can be isolated. Version: A 11-39 . Configuring Port Isolation Command function The port isolation configuration command is used to enable or disable the port isolation function of an ONU. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Port No. The authorization number of the ONU. Access method Click a GPON interface card in the object tree. The PON port number and FE port number of the ONU. Applicable object The AN5506-04-B and the AN5506-10-B1 support this command. After the port isolation function of an ONU is enabled. PON Port The number of the PON port No. The loopback status of the PON port State or FE port of the ONU. and select Config → Port Isolation in the shortcut menu. Then the Port Isolation Enable window will appear. connected with the ONU. 11. ONU No. Its value includes Loopback and Disable. Click the Compulsory drop-down list to select the value. various ports State of this ONU cannot communicate with each other. the number of PCs sharing this port at the same time is restricted.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No. connected with the ONU. interface card containing the PON — Read-only — — Read-only — — Read-only — port connected with the ONU. various ports of this ONU can communicate with each other. In this mode. The authorization number of the ONU. Under each FE port.2. Enables / disables the port isolation function. 11-40 Version: A . Applicable object The AN5506-04-B and the AN5506-10-B1 support this command. The default value is Enable. PON Port The number of the PON port No. Disable: Disables the port isolation function. Enable: Enables the port isolation function. 11. In this mode. ONU No. The purpose of this operation is to control the traffic in the network and avoid blocking. Its value includes Enable and Disable.14 Controlling Port MAC Addresses Number Command function The port MAC addresses number control command is used to control MAC address number on the FE port of an ONU. The number of the FE port of the ONU. Is used to set the maximum The value range is 0 allowed number of MAC to 254. Double-click to type the parameter value. Then the Config Port MAC Limit window will appear. Mac Number 11.15 The number of the PON port connected with the ONU. Port No.11 GUI Reference of a GPON Terminal Access method Click a GPON interface card in the object tree pane. Configuring Performance Threshold of an FE Port Command function The FE port performance threshold configuration command is used to set the CRC error detection threshold of each FE port on an ONU. The default value is 0. a corresponding alarm will occur and be reported to the ANM2000. When the detected CRC error exceeds the set threshold value. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No.2. right-click the appointed ONU in the ONU list tab at the right side of the GUI. ONU No. Applicable object The AN5506-04-B and the AN5506-10-B1 support this command. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — — Read-only — ONU. and select Config → Port MAC-Learning Limit in the shortcut menu. addresses under each port. Version: A 11-41 . The authorization number of the ONU. PON Port No. Optional. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — — Read-only — ONU. ONU No. The FE number of the ONU. with the unit being /sec. default value is 0. Version: A . right-click the appointed ONU in the ONU list tab at the right side of the GUI. and select Config → FE Port Perf Threshold in the shortcut menu. 11-42 The value range: 0 to 4294967294. The default value is 0. The Double-click to Compulsory parameter value. Down The downlink CRC error Crc-Threshold statistical threshold of the FE (/sec) port. with the unit being /sec. The value range: 0 to 4294967294. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No. The number of the PON port connected with the ONU.AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Click a GPON interface card in the object tree. PON Port No. Then the FE Port Perf Threshold window will appear. type the Double-click to Compulsory type the parameter value. Up The uplink CRC error Crc-Threshold statistical threshold of the FE (/sec) port. Port No. The authorization number of the ONU. Note: After completing performance collection. optical module parameters. connected with the ONU. Access method Click a GPON interface card in the object tree pane.11 GUI Reference of a GPON Terminal 11. The performance parameters to be collected include port performance statistics. Applicable object The AN5506-04-B and the AN5506-10-B1 support this command. and select Config → Performance Sort Switch in the shortcut menu. 11-43 . Version: A The authorization number of the ONU. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No. ONU No. right-click the appointed ONU in the ONU list tab at the right side of the GUI. PON Port The number of the PON port No. The purpose is to save system resource and ensure normal running of the system. users need to disable this function in a timely manner.2.16 Enabling / Disabling Performance Classification Command function The enabling / disabling performance classification command is used to enable / disable the performance collection function of an ONU. and CPU / memory utilization ratio. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — ONU. Then the Performance Sort Switch window will appear. Then the Optical Detect Enable window will appear. and CPU/Memory Usage.2. Enable and Disable. Its value includes The default value is Disable. and select Config → Optical Detect Enable in the shortcut menu.17 Configuring Optical Power Monitor Function Command function The optical power monitor configuration command is used to enable / disable the optical power monitor function of an ONU. right-click the appointed ONU in the ONU list tab at the right side of the GUI. 11. interface card containing the PON port connected with the — Read-only — — Read-only — ONU. Applicable object The AN5506-04-B and the AN5506-10-B1 support this command. Access method Click a GPON interface card in the object tree pane. PON Port No. Optical Detect.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The performance collection item name of the ONU. Perf Code Its value includes Port Perf — Read-only — Statistic. Click the Compulsory drop-down list to select the value. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No. 11-44 The number of the PON port connected with the ONU. Enables / disables the performance collection function Switch of various performance parameters. Version: A . 2. 11-45 . Access method Click a GPON interface card in the object tree pane. and select Config → GEMPort maping mode in the shortcut menu.11 GUI Reference of a GPON Terminal Parameter Name ONU No. ONU No. Then the GEMPort maping mode window will appear. Version: A The authorization number of the ONU. Parameter Description The authorization number of the ONU. drop-down list to — Compulsory select the value (Enable or Disable). right-click the appointed ONU in the ONU list tab at the right side of the GUI. PON Port The number of the PON port No. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — ONU. Value Range / Requirement — Property Read-only Configuration Method — Click the State Enables / disables the optical power monitor function.18 Configuring GEMPort Mapping Mode Command function The GEMPort mapping mode configuration command is used to configure the GEMPort mapping mode. connected with the ONU. 11. Applicable object The AN5506-04-B and the AN5506-10-B1 support this command. Inner protocol Value Range / 65534. 65534. TPID. Applicable object The AN5506-04-B and the AN5506-10-B1 support this command. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Configuration Click the Ethernet Priority + VLAN ID. After the loop test function of a certain ONU port is enabled. and select Config → Port Loop Detect in the shortcut menu. The default Compulsory value is 33024. Outter The value range is 0 to Double-click to protocol The outer TPID. and Compulsory — Method drop-down list to select the value. interface card containing the PON port — Read-only — — Read-only — connected with the ONU.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name GEMPort maping mode Parameter Description Requirement Property The GEMPort mapping mode. The default Double-click to Compulsory type the inner identifier value is 33024. The value includes Ethernet Priority. PON Port The number of the PON port No.2. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No. Then the Port Loop Detect window will appear. identifier 11. users can test the link status. VLAN ID. it can be used to set the time interval of loop test.19 type the outer TPID. The value range is 0 to The inner TPID. Performing Loop Test of a Port Command function The port loop test command is used to enable / disable the loop test function of an ONU port. 11-46 Version: A . connected with the ONU. in addition. Access method Click a GPON interface card in the object tree pane. — Read-only — Enables / disables the loop test UNI Loop Detect Management function. Click the — Compulsory drop-down list to select the value. the loop test function is disabled. After this command is executed. When this parameter is set to Disable.11 GUI Reference of a GPON Terminal Parameter Name Onu No. Applicable object The AN5506-10-B1 supports this command. This parameter Double-click to with the unit is valid only type the time being s. enabled. — Read-only — The number of the ONU FE port. Access method Click a GPON interface card in the object tree pane. the ONU will determine the data priority according to the queue scheduling algorithm and mode defined in the profile. ONU Port No. is 10 to 3600. 20.2. The when the loop interval of loop default value is test function is test. (s) 11. Binding Ethernet Switch Queue Scheduling Algorithm Profile Command function The binding Ethernet switch queue scheduling algorithm profile command is used to bind an ONU with an Ethernet switch queue scheduling algorithm profile. Version: A 11-47 . Parameter Description Value Range / Requirement Property Configuration Method The authorization number of the ONU. Then the Queue Schedule Profile Attach window will appear. right-click the appointed ONU in the ONU list tab at the right side of the GUI. When this parameter is set to Enable. Detect Port Loop Time The time interval of loop test. the loop test function is enabled.20 The value range Optional. and select Config → Queue Schedule Profile Attach in the shortcut menu. 2. connected with the ONU. 11-48 Version: A . The authorization number of the ONU. The profile name should be configured in the Queue Schedule Profile window. Onu No. The access method is The name of the Ethernet Profile Id switch queue scheduling algorithm profile.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — ONU. the ONU port will process the uplink and downlink service flow according to the traffic policy. Compulsory.21 Binding an ONU Port with a Traffic Policy Command function The binding ONU port with traffic policy command is used to bind an ONU port with a traffic policy. the object tree. and select Config  ONU Bridge Manage  Queue Schedule Profile in the shortcut menu. PON Port The number of the PON port No. After this command is executed. 11. — described as follows: Right-click the HSWA card in Click the drop-down list to select the value. Access method Click a GPON interface card in the object tree pane. and select Config  Flow Policy in the shortcut menu. Onu No. The Ingress profile that the ONU uplink access method is Policy ID service flow is to be bound with. the HSWA card in the object tree. — described as follows: Right-click Click the drop-down list to select the value. and select Config → Port Binding Flow Policy in the shortcut menu. The authorization number of the ONU. PON Port The number of the PON port No.11 GUI Reference of a GPON Terminal Applicable object The AN5506-10-B1 supports this command. right-click the appointed ONU in the ONU list tab at the right side of the GUI. The traffic policy name should be configured in the Flow Policy The ID of the traffic policy window. The FE port number of the ONU. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No. Then the Port Binding Flow Policy window will appear. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — — Read-only — ONU. connected with the ONU. Version: A 11-49 . Compulsory. Port No. 22 Configuring Control of ONU Fan Command function The ONU fan control configuration command is used to configure the starting temperature and stopping temperature of the ONU fan. Access method Click a GPON interface card in the object tree pane. The The ID of the traffic policy Egress profile that the ONU downlink Policy ID service flow is to be bound — with. access method is described as follows: Right-click Click the drop-down list to select the value. Applicable object The AN5506-10-B1 supports this command. 11-50 Version: A . Then the ONU Fan Control window will appear. right-click the appointed ONU in the ONU list tab at the right side of the GUI. and select Config → ONU Fan Control in the shortcut menu. and select Config  Flow Policy in the shortcut menu.2. the HSWA card in the object tree.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Compulsory. 11. The traffic policy name should be configured in the Flow Policy window. must be higher than the fan stopping temperature. Double-click to Compulsory type the parameter value. When it is enabled. the fan to 60. The authorization number of the ONU. being ℃.2. with the unit being ℃. and also prunes a loop network into a loop-free tree network. with the unit temperature starts running. PON Port The number of the PON port No. The default value is 25. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — ONU. connected with the ONU. Double-click to Compulsory type the parameter value. Version: A 11-51 . the fan stops running. The default The fan starting temperature value is 35.23 Enabling / Disabling RSTP Command function The enabling / disabling RSTP command is used to enable or disable the RSTP function. 11.11 GUI Reference of a GPON Terminal Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No. the RSTP implements path redundancy and path optimization via certain algorithms. The fan starting temperature The value range is 5 to 60. When the equipment temperature reaches the fan stopping temperature Fan stop temperature threshold set by this parameter. When the equipment temperature reaches the fan starting temperature threshold The value range is 15 Fan start set by this parameter. ONU No. must be higher than the fan stopping temperature. This helps to avoid proliferation and infinite loop of packets in the loop network. 24 Binding a Packet Suppression Profile Command function The packet suppression profile binding command is used to bind a packet suppression profile with an ONU port. multicast packets. connected with the ONU. The authorization number of the ONU. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No.2. drop-down list to — Compulsory select the value (Enable or Disable). and select Config → RSTP Switch in the shortcut menu. When an ONU port is bound with a packet suppression profile. 11. the system will perform rate control of broadcast packets. right-click the appointed ONU in the ONU list tab at the right side of the GUI.AN5516-06 Optical Line Terminal Equipment GUI Reference Applicable object The AN5506-10-B1 supports this command. and unknown packets passing through this port according to the configuration in the profile. Then the RSTP Switch window will appear. PON Port The number of the PON port No. Access method Click a GPON interface card in the object tree pane. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — ONU. Click the RSTP Enables or disables the RSTP Enable function. ONU No. 11-52 Version: A . interface card containing the PON — Read-only — — Read-only — — Read-only — — Read-only — port connected with the ONU. Compulsory. The packet suppression profile name should be configured in the Packets Rate Control Profile Profile Id The name of the packet suppression profile. Access method Click a GPON interface card in the object tree pane. right-click the appointed ONU in the ONU list tab at the right side of the GUI. the HSWA card in the object tree. Onu No. The FE port number of the ONU. and select Config → Packet Rate Control Profile Attach in the shortcut menu. The authorization number of the ONU. Port No. Version: A 11-53 .11 GUI Reference of a GPON Terminal Applicable object The AN5506-10-B1 supports this command. PON Port The number of the PON port No. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No. and select Config  ONU Bridge Manage  Packets Rate Control Profile in the shortcut menu. Then the Packet Rate Control Profile Attach window will appear. — window. connected with the ONU. The access Click the method is described drop-down list to as follows: Right-click select the value. The default value is 1000000.25 Configuring Bandwidth of an ONU Command function The ONU bandwidth configuration command is used to configure the uplink / downlink service bandwidth of an ONU. with the unit being service bandwidth of the ONU. the AN5506-10-B1. The default The value range is Bandwidth (kbit/s) The downlink service bandwidth of the ONU. The value range is Upstream Bandwidth (kbit/s) The uplink service bandwidth of the ONU. Version: A . kbit/s. with the unit being Compulsory kbit/s. Applicable object The AN5506-04-B.AN5516-06 Optical Line Terminal Equipment GUI Reference 11. value is 1000000. and select Config → ONU Bandwidth in the shortcut menu. Double-click to 256 to 1000000. Access method Click a GPON interface card in the object tree pane. PON Port No. and the HG260 all support this command. Onu No. Downstream type the uplink Compulsory type the downlink service bandwidth of the ONU. 11-54 Double-click to 256 to1000000. Then the ONU Bandwidth window will appear. right-click the appointed ONU in the ONU list tab at the right side of the GUI. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — ONU. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No. The authorization number of the ONU.2. The number of the PON port connected with the ONU. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the Slot No. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — Enabling Anti-DoS Attack Function Command function The enabling anti-DoS attack command is used to enable the anti-DoS attack function of an ONU. ONU No. The authorization number of the ONU. The DoS attack refers to an attack from a malicious user who sends a large number of protocol packets. Applicable object The AN5506-10-B1 supports this command. When the anti-DoS attack function of an ONU is enabled. and select Config → Anti-Dos attack in the shortcut menu. GPON interface card containing the PON port — Read-only — — Read-only — — Read-only — connected with the ONU. Then the Anti-Dos attack window will appear.11 GUI Reference of a GPON Terminal Parameter Name Parameter Description Profile Binding The binding / unbinding status of Info the bandwidth profile.26 The name of the bound bandwidth profile. PON Port No. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Access method Click a GPON interface card in the object tree. the ONU can receive appointed protocol packets in selective mode. 11-55 . Version: A The number of the PON port connected with the ONU. which results in denying service requests of normal users by the system. Profile Name 11.2. drop-down list to Compulsory select the value (Enable or Disable). drop-down list to Compulsory select the value (Enable or addresses of a packet to the Disable). and this causes paralysis or restart of the system. the attacked Click the The default value is Disable. IP address of the attacked host. the attacked Disable). system tries to send a response message to itself. system tries to send a response message to itself. The TCP_BLAT attack is Click the described as follows: A malicious user sends a TCP_BLAT forged packet with the same TCP source and destination The default value is Disable. and then sends this packet to the attacked host via IP spoofing. Enables / disables the anti-TCP_BLAT attack function. The LAND attack is Click the described as follows: A IP_LAND malicious user sets both the The default value source and destination is Disable. Enables / disables the anti-UDP_BLAT attack function. The UDP_BLAT attack is described as follows: A malicious user sends a UDP_BLAT forged packet with the same UDP source and destination port numbers. and this causes paralysis or restart of the system. 11-56 Version: A .AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Enables / disables the anti-IP_LAND attack function. drop-down list to Compulsory select the value (Enable or port numbers. FIN / URG / PSH bits are set to 1. its SYN is 1. Version: A 11-57 . The default value is Disable. drop-down list to Compulsory select the value (Enable or number is set to 0. Enables / disables the anti-TCP_SYNError attack Click the function. port number is less than1024. Enables / disables the anti-XMASScan attack Click the function. its TCP serial Disable). drop-down list to Compulsory select the value (Enable or Disable). Click the Enables / disables the TCP_SYNFINScan anti-TCP_SYNFINScan attack function. and layer 4 destination The default value is Disable. and its Disable). TCP_NULLScan The TCP_NULLScan attack The default value Switch is described as follows: For a is Disable. number is set to 0. its TCP serial The default value is Disable. drop-down list to Compulsory select the value (Enable or Disable). and its control bits are all set to 0. The TCP_SYNError attack is TCP_SYNError described as follows: For a packet.11 GUI Reference of a GPON Terminal Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Enables / disables the anti-TCP_NULLScan attack Click the function. The XMASScan attack is TCP_XMASScan described as follows: For a packet. drop-down list to Compulsory select the value (Enable or packet. ACL is 0. its TCP packet The default value is Disable. Enables / disables the anti-ICMPv6_Fragment attack function. its fragmentation Disable).AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Enables / disables the anti-TCP_ShortHDR attack Click the function. and specifies drop-down list to Compulsory select the value (Enable or Disable). 11-58 Version: A . an offset value in the offset field. Enables / disables the anti-ICMPv4_Fragment attack function. is Disable. Enables / disables the Click the anti-TCP_FragError attack function. Click the Compulsory drop-down list to select the value. it is set with a More fragment flag. and specifies an offset value in the offset field. The TCP_ShortHDR attack is TCP_ShortHDR described as follows: For a packet. wander is 1. is Disable. it is set with a More fragment flag. Click the The ICMPv6_Fragment ICMPv6_Fragment attack is described as The default value follows: For an ICMP frame. drop-down list to Compulsory select the value (Enable or header length is less than the Disable). minimum allowed TCP packet header length. The ICMPv4_Fragment ICMPv4_Fragment attack is described as The default value follows: For an ICMP frame. drop-down list to Compulsory select the value (Enable or packet. TCP_FragError The TCP_FragError attack is described as follows: For a The default value is Disable. target system so that this system denies service requests of normal users.11 GUI Reference of a GPON Terminal Parameter Name Parameter Description Value Range / Requirement Property Configuration Method Enables / disables the anti-ICMPv4_LongPing attack function. Version: A 11-59 . Click the The ICMPv6_LongPing attack is described as follows: A malicious user ICMPv6_LongPing uses the pinging broadcast The default value is Disable. drop-down list to Compulsory select the value (Enable or storm to flood the entire Disable). target system so that this system denies service requests of normal users. drop-down list to Compulsory storm to flood the entire select the value (Enable or Disable). Click the The ICMPv4_LongPing attack is described as follows: A malicious user ICMPv4_LongPing uses the pinging broadcast The default value is Disable. 11.2. Enables / disables the anti-ICMPv6_LongPing attack function. Applicable object The HG260 supports this command.27 Configuring Remote Management Command function The remote management configuration command is used to configure the TR069 remote management function. The authorization number of the ONU. Double-click to type the IGD-ACS-SERVER-UserName The authentication authentication user name for the user name for terminal to send the — Compulsory the terminal to connection request to send the the ACS server. and select Config → Remote Management Config in the shortcut menu. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Onu No.AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Click a GPON interface card in the object tree pane. PON port connected with the ONU. The value IGD-TR069-Enable Enables / disables includes the TR069 function. The number of the PON Port No. connection request to the ACS server. Enable. 11-60 Version: A . Double-click to IGD-ACS-SERVER-URL The ACS server URL provided by the ISP. card containing the — Read-only — — Read-only — — Read-only — PON port connected with the ONU. Parameter Parameter Name Parameter Value Range / Description Requirement Property Configuration Method The slot number of the GPON interface Slot No. type the ACS — Compulsory server URL provided by the ISP. Then the Remote Management Config window will appear. Disable and Click the Compulsory drop-down list to select the value. When IGD-Inform-Enable the report interval expires. the Inform message information automatically.11 GUI Reference of a GPON Terminal Parameter Name Parameter Value Range / Description Requirement Property Configuration Method Double-click to type the IGD-ACS-SERVER-Password The authentication authentication password for the password for terminal to send the — Compulsory the terminal to connection request to send the the ACS server. valid. Enables / disables the Inform message regular report function. It is used for the equipment to communicate with the ACS server of the ISP regularly. connection request to the ACS server. ACS server of the ISP automatically. Optional. The default value is 43200. parameter this parameter is value. Enable. If IGD-Inform-Enable is set to Enable. the equipment will report The value includes Disable and Click the Compulsory drop-down list to select the value. when the regular report interval set by IGD-Inform-Interval (s) this parameter expires. with the unit being s. Version: A 11-61 . When Double-click to IGD-Inform-Enable type the is set to Enable. the equipment will conduct verification connection with the The value range is 0 to 4294967295. so as to implement information interaction. the connection request to the terminal. Double-click to type the IGD-CONN-Password The password to password to perform subscriber perform authentication when subscriber the ACS server — Compulsory authentication sends the connection when the ACS request to the server sends terminal. request to the terminal. Double-click to type the user IGD-CONN-Username The user name to name to perform subscriber perform authentication when subscriber the ACS server — Compulsory authentication sends the connection when the ACS request to the server sends terminal.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Value Range / Description Requirement Property Configuration Method Double-click to type the port to perform The port to perform IGD-CONN-Port subscriber The value subscriber authentication when range is 0 to authentication the ACS server 65534. 11-62 Version: A . the connection request to the terminal. The sends the connection default value is server terminal request to the 8099. sends the Compulsory when the ACS connection terminal. the following two parameters are Click the drop-down list to select the value. 65534. Double-click to type the The middleware IGD-Midware-URL server URL — Compulsory appointed by the ISP. type the Compulsory middleware server port appointed by the ISP. middleware server URL appointed by the ISP.11 GUI Reference of a GPON Terminal Parameter Name Parameter Value Range / Description Requirement Property Configuration Method Optional. Disable and Enable. Version: A 11-63 . When this parameter is set to Enable. The value IGD-Midware-Enable Enables or disables includes the middleware. valid. Double-click to IGD-Midware-Port The middleware The value server port appointed range is 0 to by the ISP. After an ONU is restarted. ONU No. 11-64 The number of the PON port connected with the ONU. Applicable object The AN5506-04-B.3. right-click the appointed ONU in the ONU list tab at the right side of the GUI. and select Control Command → Reset ONU in the shortcut menu. and the authorization number and configuration of this ONU are still valid. card containing the PON port connected — Read-only — — Read-only — — Read-only — with the ONU. The authorization number of the ONU. and the HG260 all support this command. so use care when executing it. Then the Reset ONU window will appear. Caution: This command can interrupt services on the ONU.AN5516-06 Optical Line Terminal Equipment GUI Reference 11. it will register to the OLT again. the AN5506-10-B1.1 Resetting an ONU Command function The resetting ONU command is used to restart the appointed ONU.3 Control Command 11. PON No. Version: A . Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON interface Slot No. Access method Click a GPON interface card in the object tree. The authorization number of the ONU. ONU FE The number of the FE port to be PORT No restarted. 11-65 . so use care when executing it. the AN5506-10-B1. and select Control Command → reset ONU FE Port in the shortcut menu. Then the reset ONU FE Port window will appear. the configuration of this port is still valid. Access method Click a GPON interface card in the object tree. interface card containing the PON — Read-only — — Read-only — — Read-only — port connected with the ONU. Version: A Double-click to Its value range depends on the number of ONU FE ports. The number of the PON port connected with the ONU. PON No.11 GUI Reference of a GPON Terminal 11. ONU No. and the HG260 all support this command.3. Applicable object The AN5506-04-B. right-click the appointed ONU in the ONU list tab at the right side of the GUI.2 Resetting an ONU FE Port Command function The resetting ONU FE port command is used to restart the appointed FE port of an ONU. After a certain FE port is restarted. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No. Caution: This command can interrupt services on the ONU FE port. Compulsory type the number of the FE port to be restarted. PON No.3 Resetting an ONU PON Port Command function The ONU PON port resetting command is used to enable or disable the PON port of the ONU. Applicable object The AN5506-04-B. right-click the appointed ONU in the ONU list tab at the right side of the GUI. and the HG260 all support this command. 11-66 Version: A . Compulsory drop-down list to select the value. Then the reset ONU PON Port window will appear. and select Control Command → reset ONU PON Port in the shortcut menu.AN5516-06 Optical Line Terminal Equipment GUI Reference 11. ONU No. Click the PON Switch Enables or disables the PON port of the The default value ONU. Access method Click a GPON interface card in the object tree. The number of the PON port connected with the ONU. The authorization number of the ONU.3. is Enable. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON interface card Slot No. containing the PON port connected with the — Read-only — — Read-only — — Read-only — ONU. the AN5506-10-B1. the AN5506-10-B1. with the ONU. RTT value The logical ranging value between the ONU (m) and the OLT. and the HG260 all support this command. PON Port The number of the PON port connected No.1 Viewing ONU Ranging Value Command function The viewing ONU ranging value command is used to view the logical ranging value between the ONU and the OLT. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON interface Slot No.11 GUI Reference of a GPON Terminal 11. and select Get Information → ONU RTT Value in the shortcut menu. ONU No. Access method Click a GPON interface card in the object tree.4. right-click the appointed ONU in the ONU list tab at the right side of the GUI.4 Get Information Command 11. Read-only — with the ONU. Version: A 11-67 . Applicable object The AN5506-04-B. Then the Get ONU RTT Value window will appear. card containing the PON port connected — Read-only — — Read-only — — Read-only — The unit is m. The authorization number of the ONU. Double-click to type Its value range POTS Port The number of the POTS port to be depends on the No. number of ONU Compulsory the number of the POTS port to be tested.4. no matter Click the — Compulsory drop-down list to select the value. PON Port The number of the PON port No. users can execute this command to perform line diagnosis. Then click the POTS Outline Test tab in the window that appears. connected with the ONU. When Force is selected. The external line test mode of the POTS port. interface card containing the PON — Read-only — — Read-only — — Read-only — port connected with the ONU.2 Testing POTS Port External Line Status Command function The testing POTS port external line status command is used to query the external voice line status of an ONU. ONU No. 11-68 Version: A . FE ports. and select Get Information → Line Test in the shortcut menu. The value includes Test Type Force Test and No Force Test. and the POTS Outline Test window will appear. the subscriber is in conversation. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No. When the voice line has faults. Access method Click a GPON interface card in the object tree pane. The authorization number of the ONU. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Applicable object The AN5506-10-B1 supports this command.AN5516-06 Optical Line Terminal Equipment GUI Reference 11. tested. the test will be performed only when the subscriber is not in conversation. with the earth as the reference. the subscriber service will be interrupted.11 GUI Reference of a GPON Terminal Parameter Name Parameter Description Value Range / Requirement Property Configuration Method this test will be performed. Read-only — The unit is V. with the earth as the reference. A -> ground insulation The impedance of telephone line resistance A. The external line test status. (Ω) Version: A 11-69 . The DC voltage of telephone line B. (Ω) A -> B insulation The impedance between resistance telephone lines A and B. Its Test State value includes Test Succeed and Test Refused. A ->B DC The DC voltage between Voltage (V) telephone lines A and B. with the earth as the reference. A -> ground DC Voltage (V) B -> ground DC Voltage (V) The DC voltage of telephone line A. During the test. Its values corresponding to the following port status items: normal / Port State line insulation bad / line breakage / mixed line / line grounding bad / line interfere / line creepage / not hang up / short circuit. with the earth as the reference. Read-only — Test Refused The status of the tested port. Read-only — The unit is Ω. Test Succeed / Read-only — — Read-only — — Read-only — The unit is V. When No Force Test is selected. (Ω) B -> ground insulation The impedance of telephone line resistance B. Refused The reason of the test being Reason refused. Read-only — The unit is Ω. Read-only — The unit is Ω. Read-only — The unit is V. with the earth as the reference. Applicable object The AN5506-10-B1 supports this command. Read-only — The unit is PF. The AC voltage of telephone line A.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method A -> B polarity reversal insulation The polarity reversal resistance.3 Testing POTS Port Internal Line Status Command function The testing POTS port internal line status command is used to query the internal voice line status of an ONU. A -> B loop resistance The total resistance of the AB loop. 11-70 Version: A . Read-only — The unit is V. with the earth as the reference.4. Read-only — The unit is PF. Read-only — The unit is V. Read-only — The unit is Ω. (Ω) 11. When the voice line has faults. users can execute this command to perform line diagnosis. Read-only — The unit is V. The capacitance of telephone line B. with the earth as the reference. with the earth as the reference. The AC voltage of telephone line B. Read-only — resistance (Ω) A -> ground capacitance (PF) B -> ground capacitance (PF) A -> B capacitance (PF) A -> ground AC Voltage (V) B-> ground AC Voltage (V) The capacitance of telephone line A. A -> B AC The AC voltage between telephone Voltage (V) lines A and B. The unit is Ω. Read-only — The unit is PF. The capacitance between telephone lines A and B. Version: A 11-71 . number of ONU Compulsory type the number of the POTS port to be tested. no matter the subscriber is in Click the conversation. FE ports. The number of the PON port connected with the ONU. When Force is selected. the test will be performed only when the subscriber is not in conversion. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No. the — Compulsory drop-down list to select the value. interface card containing the PON port connected with the — Read-only — — Read-only — — Read-only — ONU. The value includes Force Test and No Force Test. Then click the POTS Inline Test tab in the window that appears. Its value Test State includes Test Succeed and — Read-only — Test Refused. The test status. When No Force Test is selected. PON Port No. ONU Authorized The authorization number of No. and select Get Information → Line Test in the shortcut menu. and the POTS Inline Test window will appear. subscriber service will be interrupted. The number of the POTS port depends on the to be tested. During the test. The internal line test mode of the POTS port. the ONU. right-click the appointed ONU in the ONU list tab at the right side of the GUI. this test will be Test Type performed.11 GUI Reference of a GPON Terminal Access method Click a GPON interface card in the object tree pane. Double-click to Its value range POTS Port No. The current value in the loop formed after off-hook. Read-only — The unit is V. Includes Normal and Abnormal. Signal Tone Volume (DB) Signal Tone Frequency (HZ) Ringing Current The ringing current voltage Voltage (V) value. The unit Loop Current (A) is A. The current status of the Feeder Voltage telephone feed voltage value. The unit is Hz. Read-only — The dial tone level value. Read-only — The unit is V. The loop current status in the Loop Current State loop formed after off-hook. Read-only — refused. Applicable object The AN5506-04-B and the HG260 support this command. Read-only — The dial tone frequency value. State Includes Normal and Abnormal. The telephone feed voltage Feeder Voltage (V) value. The unit is dB. The current dial tone status.4. 11-72 Version: A .AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description The reason of the test being Refused Reason Value Range / Requirement Property Configuration Method — Read-only — — Read-only — — Read-only — — Read-only — The unit is A. 11. Signal Tone State Includes Normal and Abnormal.4 Viewing NGN Statistical Information Command function The viewing NGN statistical information command is used to view the voice signaling packets and RTP packets Tx / Rx status of an ONU. The number of the RTP SendRTPPackets voice packets sent by the ONU. The number of the RTP ReceivedRTPBytes voice bytes received by the ONU. port connected with the ONU. Then the NGN Statistic Info window will appear. ReceivedNGN RespPackets SendNGN RespPackets The number of the response packets received by the ONU. right-click the appointed ONU in the ONU list tab at the right side of the GUI. GPON interface card containing the PON port — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — connected with the ONU. ONU Authorization The authorization number No. The number of the SendNGNReqPackets request packets sent by the ONU. of the ONU.11 GUI Reference of a GPON Terminal Access method Click a GPON interface card in the object tree. and select Get Information → NGN Statistic Info in the shortcut menu. ReceivedNGNReq Packets The number of the NGN request packets received by the ONU. The number of the PON PON Port No. Version: A 11-73 . The number of the RTP ReceivedRTPPackets voice packets received by the ONU. The number of the response packets sent by the ONU. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the Slot No. 11. Read-only — — Read-only — — Read-only — — Read-only — — Read-only — ONU. including RTP stream Tx / Rx statistical information and call duration statistical information. The error signaling packet number of the WrongSigPackets ONU. NetworkAvgDelay The network average (ms) delay of the ONU. Read-only — The unit is ms.4. The lost signaling packet LostSigPackets number of the ONU. The packet loss rate of PacketLoss (%) the ONU. The retransmitted RetransmitPackets signaling packet number of the ONU. 11-74 Version: A . The bandwidth occupied Bandwidth Usage by the voice service on (kbit/s) the ONU. Read-only — The unit is kbit/s. Read-only — The unit is ms. The unknown signaling UnknownSigPackets packet number of the ONU.5 Viewing NGN Port Statistical Information Command function The viewing NGN port statistical information command is used to view the statistical information of an ONU POTS port. RTPAvgJitterBuffer The average voice jitter (ms) delay of the ONU. Applicable object The AN5506-04-B and the HG260 support this command.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The number of the RTP voice bytes sent by the SendRTPBytes — Read-only — The unit is %. GPON interface card containing the PON port — Read-only — — Read-only — — Read-only — connected with the ONU. Lastest Call End The end time of the latest Time call of the POTS port. The number of the RTP SendRTPBytes voice bytes sent by the POTS port. PON No. Read-only — — Read-only — — Read-only — the POTS port. right-click the appointed ONU in the ONU list tab at the right side of the GUI. POTS ports. Double-click to Its value range ONU Port No. The number of the RTP ReceivedRTPPackets voice packets received by — Read-only — — Read-only — — Read-only — — Read-only — The unit is ms. The number of the RTP ReceivedRTPBytes voice bytes received by the POTS port. The authorization number of the ONU. RTPJitterBuffer (ms) The voice jitter delay of the POTS port. Lastest Call Begin The start time of the latest Time call of the POTS port. The number of the RTP SendRTPPackets voice packets sent by the POTS port. and select Get Information → NGN Statistic Info in the shortcut menu. and the NGN Port Statistic Info window will appear. The number of the PON port connected with the ONU. The number of the ONU depends on the POTS port. number of ONU Compulsory type number of the ONU POTS port. ONU No. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the Slot No.11 GUI Reference of a GPON Terminal Access method Click a GPON interface card in the object tree pane. Version: A 11-75 . Then select the NGN Port Statistic Info tab in the window that appears. Total Call Duration The total call duration of a (s) subscriber of the POTS port. DownstreamRate The downlink rate of the (kbit/s) POTS port. Read-only — The unit is kbit/s. The call times of a subscriber of the POTS port. PacketLoss (%) 11-76 The packet loss rate of the POTS port. Value Range / Requirement Property Configuration Method The unit is s. AvgNetworkDelay The network average delay (ms) of the POTS port.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Last Call Duration (s) Total Call Times Parameter Description The current call duration of the POTS port. Read-only — The unit is ms. Read-only — Version: A . Read-only — The unit is %. Read-only — The unit is kbit/s. UpstreamRate The uplink rate of the POTS (kbit/s) port. Read-only — — Read-only — The unit is s. 11 GUI Reference of a GPON Terminal 11. failed. The number of the PON port connected with the ONU. — Read-only — — Read-only — Slot No. Reg Status registering. disconnected. right-click the appointed ONU in the ONU list tab at the right side of the GUI. The POTS port number of the ONU. The call status of the POTS port.4. Access method Click a GPON interface card in the object tree. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON interface — Read-only — — Read-only — The authorization number of the ONU. Version: A 11-77 . Then select the NGN Resource State tab in the window that appears. connecting. on-hook. ONU Authorization No. The status includes: non-activated. and not on-hook for a long time. busy. POTS port. dialing. PON Port No. card containing the PON port connected with the ONU. ringing. ring back tone.6 Viewing NGN Resource Status Command function The viewing NGN resource status command is used to view the subscriber status of an ONU voice port and the corresponding RTP resource information. and select Get Information → NGN Statistic Info in the shortcut menu. off-hook. idle. connected. — Read-only — Telephone The telephone number configured for the No. and the NGN Resource State window will appear. — Read-only — POTS No. Applicable object The AN5506-04-B and the HG260 support this command. — Read-only — ID 11. Access method Click a GPON interface card in the object tree. Applicable object The AN5506-04-B and the HG260 support this command. — Read-only — RTP Port The number of the RTP port. 11-78 Version: A .4. Then select the NGN RTP Resource tab in the window that appears.7 Viewing NGN RTP Resource Configuration Command function The viewing NGN RTP resource configuration command is used to view the RTP resource configuration information of an ONU. right-click the appointed ONU in the ONU list tab at the right side of the GUI. and the NGN RTP Resource window will appear.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Termination Parameter Description Value Range / Requirement Property Configuration Method The ID of the termination point. and select Get Information → NGN Statistic Info in the shortcut menu. — Read-only — RTP Name The name of the RTP resource. interface card containing the PON port — Read-only — — Read-only — — Read-only — — Read-only — connected with the ONU.11 GUI Reference of a GPON Terminal Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No. Version: A 11-79 .8 Viewing ONU Port Loopback Test Command function The viewing ONU port loopback test command is used to view the test results of ONU port loopback. PON Port No. No. The name of the RTP resource. ONU Authorization The authorization number of the ONU. the AN5506-10-B1. Access method Click a GPON interface card in the object tree pane.4. The RTP first 128 items are displayed. right-click the appointed ONU in the ONU list tab at the right side of the GUI. 11. Resource The AN5516-06 supports Name configuration of 6000 NGN RTP resource items. Then the ONU Port loopback check-up window will appear. and the HG260 all support this command. The number of the PON port connected with the ONU. The parameters include number and delay of the Tx / Rx frames. Applicable object The AN5506-04-B. and select Get Information → ONU Port loopback check-up in the shortcut menu. The value Port No. Click the range includes numbers of all Compulsory PON ports and drop-down list to select the value. Read-only — Max Delay (us) The maximum delay of Rx frames. FE ports. Read-only — Avg Delay (us) The average delay of Rx frames. The number of the PON port connected with the ONU. Read-only — Send Frame Frames Received OK Frames Received Corrupted 11. and the HG260 all support this command.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON interface Slot No. The unit is us. The number of the ONU port to be looped back. — Read-only — The number of Rx error frames. PON Port No. including connection status. The unit is us. ONU No. The authorization number of the ONU. The number of Tx frames. — Read-only — Min Delay (us) The minimum delay of Rx frames. 11-80 Version: A . flow control status. the AN5506-10-B1. and port physical status. card containing the PON port connected — Read-only — — Read-only — — Read-only — with the ONU.9 Viewing Port Status Information Command function The viewing port status information command is used to view the status information of various ONU ports.4. — Read-only — The number of Rx correct frames. Applicable object The AN5506-04-B. The unit is us. Port No. — Read-only — Duplex The duplex mode of the port.11 GUI Reference of a GPON Terminal Access method Click a GPON interface card in the object tree pane. PON Port The number of the PON port No. ONU No. — Read-only — Slot No. The enabling status of the Flow Control flow control function on the port. — Read-only — Loopback The loopback status of the Status port. The number of the ONU port. AutNeg Admin State Speed (Mbit/s) Version: A The enabling status of the auto negotiation function on the port. Then the port info window will appear. connected with the ONU. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON interface card — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — The rate of the port. containing the PON port connected with the ONU. right-click the appointed ONU in the ONU list tab at the right side of the GUI. The connection status of the port. and select Get Information → port info in the shortcut menu. LINK Status The authorization number of the ONU. Phy Admin The enabling / disabling State status of the port. 11-81 . optical module temperature. optical module voltage. Optical module The optical module type. The voltage of the optical module. The type (KM) default value is 20. Read-only — The unit is V. The authorization number of the ONU. Access method Click a GPON interface card in the object tree pane. Tx and Rx optical power. Then the OptModule Para Information window will appear.10 Viewing Optical Module Parameters Information Command function The viewing optical module parameters command is used to view optical module status parameters of an ONU. ONU No. Applicable object The AN5506-04-B. The number of the PON port connected with the ONU. the AN5506-10-B1. The bias current of the optical module. and select Get Information → OptModule Para Information in the shortcut menu. GPON interface card containing the PON port — Read-only — — Read-only — — Read-only — The unit is km. Version: A . bias current. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the Slot No.AN5516-06 Optical Line Terminal Equipment GUI Reference 11. right-click the appointed ONU in the ONU list tab at the right side of the GUI. and the HG260 all support this command. Temperature (C) Voltage (V) Current (mA) 11-82 The temperature of the optical module. Read-only — The unit is ℃. Read-only — The unit is mA. including optical module type. Read-only — connected with the ONU. PON Port No.4. The number of the PON port connected with the ONU. The value includes MGCP.11 Value Range / Requirement Property Configuration Method The unit is dBm. — Read-only — The ID of the MG. Read-only — The unit is dBm. Read-only — Querying MG Configuration Command function The querying MG configuration command is used to query the configuration information of the MG.11 GUI Reference of a GPON Terminal Parameter Name Parameter Description The Tx optical power of the Tx power (Dbm) optical module. — Read-only — — Read-only — The authorization number of the ONU. the AN5506-10-B1. MGID Protocol Type Version: A The type of the softswitch platform protocol. Applicable object The AN5506-04-B. Access method Click a GPON interface card in the object tree pane. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON interface Slot No. ONU Authorized No.4. — Read-only — — Read-only — card containing the PON port connected with the ONU. Then the MG Configuration Report window will appear. and the HG260 all support this command. and 11-83 . The Rx optical power of the Rx power (Dbm) optical module. 11. PON Port No. right-click the appointed ONU in the ONU list tab at the right side of the GUI. and select Get Information → MG Configuration Report in the shortcut menu. MEGAGO. — Read-only — The signaling CVLAN TPID. — Read-only — The media stream SVLAN TPID. First SIP The IP address of the SIP active register Server server. — Read-only — The signaling CVLAN priority. First SIP-Proxy Server Second SIP-Proxy Server Signal SVLAN TPID Signal SVLAN ID SVLAN Cos Signal CVLAN TPID Signal CVLAN ID CVLAN Cos RTP SVLAN TPID RTP SVLAN ID RTP SVLAN Cos RTP CVLAN TPID RTP CVLAN ID RTP CVLAN Cos 11-84 The IP address of the SIP active proxy server. EID First MGC IP The gateway domain name. — Read-only — The media stream SVLAN priority.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method SIP. Second MGC The IP address of the standby softswitch IP platform. — Read-only — The signaling SVLAN priority. — Read-only — The media stream CVLAN TPID. — Read-only — The media stream SVLAN ID. The IP address of the SIP standby proxy server. — Read-only — The signaling SVLAN ID. — Read-only — The media stream CVLAN priority. — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — The signaling SVLAN TPID. — Read-only — The IP address of the active softswitch platform. — Read-only — The media stream CVLAN ID. — Read-only — The signaling CVLAN ID. Version: A . Second SIP The IP address of the SIP standby register Server server. — Read-only — 11. — Read-only — The signaling IP address. — Read-only — — Read-only — — Read-only — — Read-only — IP MODE Its value includes Static. — Read-only — The signaling gateway address.11 GUI Reference of a GPON Terminal Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The IP address acquisition mode.4. Keep Alive The enabling status of the heartbeat function. PPPoE The password for obtaining the IP address Password in PPPoE mode. Applicable object The AN5506-04-B. — Read-only — RTP IP The media stream IP address. Signal IP Signal Gateway PPPoE name The user name for obtaining the IP address in PPPoE mode. — Read-only — Alive Time(s) The heartbeat test times. Alive Interval The heartbeat interval. Version: A 11-85 . and DHCP. the AN5506-10-B1. PPPoE.12 Querying Parameter Configuration of Fax / Modem Service Command function The fax / modem service parameter configuration query command is used to query the related parameters of the fax / modem service of an ONU. — Read-only — RTP Gateway The media gateway address. and the HG260 all support this command. VoiceFax/ModemControl 11. Port No. — Read-only — — Read-only — — Read-only — Compulsory — — Read-only — — Read-only — PON port connected with the ONU. and select Get Information → GET FAX/Modem Configuration in the shortcut menu.AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Click a GPON interface card in the object tree pane. The number of the PON port connected PON Port No. to 32. ONU Authorized No. Querying ONU POTS Port Status Command function The querying ONU POTS port status command is used to query the current status of an ONU POTS port. and the HG260 all support this command. Applicable object The AN5506-04-B. with the ONU.13 The control mode of the fax data. Parameter Parameter Name Parameter Value Range / Description Requirement Property Configuration Method The slot number of the GPON interface card containing the Slot No. The authorization number of the ONU. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Then the GET FAX/Modem Configuration window will appear. The number of the The value range is 1 ONU port. 11-86 Version: A .4. The transmission mode of the fax Voice38Enable service. the AN5506-10-B1. registering. 12.711A. other. Read-only 9. connected. The authorization number of the ONU. disabled. Read-only Rx Gain (dB) The Rx gain. Read-only Reversed Polarity The polarity reversal signal enabling status. G. G. Includes G. 7. Read-only Tx Gain (dB) The Tx gain. 2.38. terminating services automatically. releasing connection. 3. iadPortServiceState The status includes the following items: 1. Read-only Port No.711U. Port Status idle. Parameter Description The slot number of the GPON interface card containing the PON port connected with the ONU. and T. Read-only SIPUSERNAME The user name corresponding to the SIP subscriber port. Read-only Version: A 11-87 . connecting. off-hook. 3. Read-only SIPUSERPWD The password corresponding to the SIP subscriber port. Read-only Echo Cancel The echo suppression function enabling status.729. 6. The value range is 1 to 64. Termination ID The ID of the termination point. iadPortCodecMode The coding / decoding mode of the port.11 GUI Reference of a GPON Terminal Access method Click a GPON interface card in the object tree pane. The status includes the following items: 1. 10. normal. and select Get Information → ONU POTS Status in the shortcut menu. ringing. 4. 2. right-click the appointed ONU in the ONU list tab at the right side of the GUI.723. Read-only RTP Name The name of the RTP resource. 8. G. terminating services locally. ring back tone. 4. dialing. Property Read-only PON Port No. Read-only RTP Port The RTP port number. Compulsory The current status of the subscriber port. Read-only The current status of the subscriber port service. G. The number of the ONU port. Read-only SIP Telephone The SIP telephone number. Then the ONU POTS Status window will appear. terminating services at the opposite Read-only end. 5. register failed.726. 11. The number of the PON port connected with the ONU. Parameter Parameter Name Slot No. Read-only ONU Authorized No. ONU No.14 Performing Emulation Command Command function The emulation command is used to detect the operating status of an ONU POTS port via the incoming / outgoing call emulation test. State The status includes the following items: test started and test not — Read-only started. right-click the appointed ONU in the ONU list tab at the right side of the GUI.AN5516-06 Optical Line Terminal Equipment GUI Reference 11. PON No. and the HG260 all support this command. 11-88 Version: A . Applicable object The AN5506-04-B. and select Get Information → Simulation Command in the shortcut menu. interface card containing the PON port connected with the — Read-only — Read-only — Read-only — Read-only ONU.4. Parameter  Parameter Name Incoming start Parameter Description Value Range / Requirement Property The slot number of the GPON Slot No. The value range is 60 to 300. Port No. The number of the ONU port. Then the Simulation Command window will appear. Its Compulsory unit is s. The time-out duration of the incoming call test. the AN5506-10-B1. The authorization number of the ONU. Timeout The number of the PON port connected with the ONU. The current test status. Access method Click a GPON interface card in the object tree pane. call has been set Read-only up. The number of the ONU port. The authorization number of the ONU. and test end. The reason of test failure. called offhook. off-hook. ONU No. connected. State The status includes the following items: idle. Version: A 11-89 . Read-only ONU No. call status is not confirmed. on-hook. and test end. Fail Reason The reason includes the following items: no signaling interaction.11 GUI Reference of a GPON Terminal  Parameter Name Incoming query Parameter Description Value Range / Requirement Property Configuration Method The slot number of the Slot No. Read-only on-hook. The status includes the State following items: idle. The current status of the port. GPON interface card containing the PON port — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — connected with the ONU. off-hook. failed. connected. Conclusion The conclusion includes the following items: succeeded. Read-only Port No. The number of the PON port connected with the ONU. Read-only SS does not respond to the offhook signaling. ringing. port connected with the ONU. The authorization number of the ONU. Property Read-only PON No. The test conclusion of the incoming call emulation. Port No. The number of the PON PON No. Read-only The current status of the port. The number of the ONU port. ringing.  Parameter Name Slot No. Incoming stop Parameter Description The slot number of the GPON interface card containing the PON port connected with the ONU. The number of the PON port connected with the ONU. Property Read-only PON No. The current test status. port connected with the ONU. Read-only ONU No. The authorization number of the ONU. connected. The slot number of the GPON interface card containing the PON port Read-only 11-90 Version: A . connected with the ONU. ringing-back. Its unit is s. 300. Read-only The current status of the port. The number of the ONU port.  Parameter Name Outgoing query Parameter Description The slot number of the GPON interface card containing the PON port Slot No. ONU No. dial tone. GPON interface card containing the PON port — Read-only — — Read-only — — Read-only — — Read-only — It should be a string. receiving.AN5516-06 Optical Line Terminal Equipment GUI Reference Outgoing start  Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the Slot No. The status includes the following items: State Idle. Port No. off-hook.  Outgoing stop Parameter Name Parameter Description Property Slot No. The calling telephone number. test end. Read-only Port No. Compulsory — Compulsory — Read-only — connected with the ONU. receive end. Read-only busy tone. The number of the ONU port. State The status includes the following items: test started — and test not started. on-hook. The time-out duration of The value range is 60 to the outgoing call test. Tel Timeout The authorization number of the ONU. The number of the PON PON No. receiving. test end. Read-only Port No. the SS-transmitting dial tone signaling is not received. the channel setup failure. The number of the ONU port. Read-only The test conclusion of the outgoing call emulation. on-hook. the opposite end not off-hook. dial tone. The authorization number of the ONU. the dialed Fail Reason Read-only telephone number is not the same as the one reported to the SS. Read-only ONU No. right-click the appointed ONU in the ONU list tab at the right side of the GUI. The number of the PON port connected with the ONU. The status includes the following items: Read-only State Idle. Read-only FAILEDSIG The signaling indication for test failure. call status is not confirmed. the ring back tone is not received. Access method Click a GPON interface card in the object tree. ringing-back. Read-only TARGETNUMBER The telephone number reported to the softswitch platform.4.11 GUI Reference of a GPON Terminal Parameter Name Parameter Description Property connected with the ONU. The reason of test failure. failed. The current status of the port. Version: A 11-91 . and select Get Information → RSTP Bridge Info in the shortcut menu. the SS does not respond to the on-hook signaling. 11. DIALNUMBER The dialed telephone number. Applicable object The AN5506-10-B1 supports this command. PON No. receive end. The conclusion includes the following items: succeeded. Read-only busy tone. connected. off-hook.15 Viewing RSTP Bridge Information Command function The viewing RSTP bridge information command is used to view the RSTP bridge information of an ONU. The reason includes the following items: The SS off-hook response signaling is not received. others. MG internal reason. call has Conclusion Read-only been set up. Then the RSTP Bridge Info window will appear. Read-only — — Read-only — — Read-only — The unit is s. ONU No. A bridge with a Priority smaller priority value has a higher priority to be selected as the root bridge. Bridge Max The maximum aging time of Age (s) the RSTP bridge. Read-only — The unit is s. The authorization number of the ONU. GPON interface card containing the PON port — Read-only — — Read-only — — Read-only — The unit is s.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the Slot No. The priority of the bridge when the RSTP function is Bridge enabled. Forward The forward delay time of Delay (s) the RSTP bridge. Read-only — connected with the ONU. Bridge Mac The MAC address of the Address RSTP bridge. Read-only — The unit is s. connected with the ONU. Root Max The maximum aging time of Age (s) the root bridge. Root Bridge The priority of the root Priority bridge. PON Port The number of the PON port No. Force Version The RSTP version. Root Bridge Mac Address Root Port The MAC address of the root bridge. Read-only — — Read-only — — Read-only — — Read-only — — Read-only — The unit is s. The time interval between Bridge Hello two successive Hello Time (s) packets received by the RSTP bridge. Root Hello The time interval between Time (s) two successive Hello 11-92 Version: A . The port number of the root bridge. containing the PON port — Read-only — — Read-only — — Read-only — connected with the ONU. connected with the ONU.4.11 GUI Reference of a GPON Terminal Parameter Name Parameter Description Value Range / Requirement Property Configuration Method packets received by the root bridge. Read-only — Viewing RSTP Port Information Command function The viewing RSTP port information command is used to view the RSTP information of an appointed ONU port. ONU No. Port No. and select Get Information → RSTP Port Info in the shortcut menu. Root The forward delay time of Forward the root bridge. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Port Priority Version: A The authorization number of the ONU. The number of the port to be queried. Then the RSTP Port Info window will appear.16 The unit is s. PON Port The number of the PON port No. The priority of the port when Double-click to type — Compulsory the number of the port to be queried. 11. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the ONU Slot GPON interface card No. Access method Click a GPON interface card in the object tree. — Read-only — 11-93 . Applicable object The AN5506-10-B1 supports this command. Discarded. Designated The path cost of the Path Cost appointed root port. The number of the appointed Designated Port port. Appointed. The MAC address of the appointed bridge. It depends on the port number of the opposite end equipment. Its value includes: Port State Disabled. Designated Bridge Priority Designated Bridge MAC Address 11-94 The priority of the appointed bridge. The role of the port. Port Path The path cost of the port Cost when the RSTP is enabled. Version: A . — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — not joining RSTP. The MAC address of the appointed root port. A port with a smaller priority value is preferred to act as the root port. Learning. The operating mode of the port. Designated The priority of the appointed Port Priority port. Forwarding. Designated Root Priority Designated Root Mac Address The priority of the appointed root port.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Parameter Description Value Range / Requirement Property Configuration Method the RSTP is enabled. Root. and Unknown. Not Joining. Its value includes: Selectable. Port Role Backup. and Unknown. 11 GUI Reference of a GPON Terminal 11.17 Obtaining ONU MAC Address Command function The obtaining ONU MAC address command is used to query the MAC address of an ONU. the AN5506-10-B1. Then the MAC-learning Table On ONU window will appear. and select Get Information → MAC-learning table on ONU in the shortcut menu. Applicable object The AN5506-04-B.4. and the HG260 all support this command. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Version: A 11-95 . Access method Click a GPON interface card in the object tree pane. Then the ONU Environment State window will appear. the value of this parameter is the FE port number. including temperature and fan rotating speed of this ONU. the value of this Port No. 11. and select Get Information → ONU Environment State in the shortcut menu.4. The VLAN ID value VLAN ID corresponding to the MAC address. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — — Read-only — Read-only — The number of the port. MAC Address The MAC address learned by the port.18 The value range: 1 to 4085. 11-96 Version: A . Querying ONU Environment Status Command function The querying ONU environment status command is used to query the environment status information of an ONU. Access method Click a GPON interface card in the object tree pane. For an FE port. Applicable object The AN5506-10-B1 supports this command.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Port Type Parameter Description The type of the port. right-click the appointed ONU in the ONU list tab at the right side of the GUI. parameter is 1. The value includes PON and FE. For a PON port. The authorization number of the ONU. Connected Device Type window will appear. 11. Then the Ports. GPON interface card containing the PON port — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — connected with the ONU. PON Port No. temperature Fan speed The number of the PON port connected with the ONU. The fan rotating speed of this ONU. right-click the appointed ONU in the ONU list tab at the right side of the GUI. and select Get Information → Ports. ONU No. Connected Device Type in the shortcut menu. The temperature of the ONU. Version: A 11-97 . Access method Click a GPON interface card in the object tree pane. Applicable object The AN5506-04-B and the AN5506-10-B1 support this command.4.11 GUI Reference of a GPON Terminal Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the Slot No.19 Viewing ONU Port Connected Equipment Type Command function The viewing ONU port connected equipment type command is used to view the type of the equipment set connected with the appointed port of an ONU. The type of the equipment set connected with the port State of the ONU. port connected with the ONU. Applicable object The AN5506-10-B1 supports this command. and select Get Information → ONU IAD Port Active Status in the shortcut menu. 11-98 Version: A . containing the PON port connected with the ONU. 11.4. The authorization number of the ONU. ONU No. The port number of the ONU. PC. right-click the appointed ONU in the ONU list tab at the right side of the GUI. Access method Click a GPON interface card in the object tree.20 Querying ONU Voice Port Activation Status Command function The querying ONU voice port activation status command is used to query the RTP activation status of an ONU voice port.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Property Configuration Method Read-only — Read-only — Read-only — Read-only — Read-only — The slot number of the GPON interface card Slot No. The number of the PON PON Port No. Then the ONU IAD Port Active Status window will appear. Port No. and No Connection. The value includes HG Intelligent. The RTP activation status Active of the ONU voice port. 11. ONU No. PON Port No. and select Get Information → Power Management in the shortcut menu. right-click the appointed ONU in the ONU list tab at the right side of the GUI. The number of the PON port connected with the ONU. Access method Click a GPON interface card in the object tree pane. Applicable object The AN5506-10-B1 supports this command.21 Viewing ONU Power Supply Management Status Command function The viewing ONU power supply management status command is used to view the power supply management status of an ONU. Version: A 11-99 .4. The authorization number of the ONU. The number of the port to be queried. The Status value includes Active and — Read-only — Non-Active.11 GUI Reference of a GPON Terminal Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the Slot No. GPON interface card containing the PON port — Read-only — — Read-only — — Read-only — connected with the ONU. type the — Compulsory number of the port to be queried. Then the Power Management window will appear. Double-click to Port No. Backup Indicates whether a backup Battery battery exists.AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the Slot No. Backup Battery State 11. Applicable object The HG260 supports this command. The value includes Invalid. and Saturation. The current power supply mode of the ONU. PON Port No.22 The status of the backup battery. GPON interface card containing the PON port — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — connected with the ONU. 11-100 Version: A . The authorization number of the ONU. The value includes Main Power and Backup Battery. Power Supply Mode The number of the PON port connected with the ONU. Charging. ONU No. Working. Viewing Equipment Information Command function The viewing equipment information command is used to view the equipment information of the HG260.4. DI-Manufacturer The OUI of the OUI manufacturer. DI-Model Name The authorization number of the ONU. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the Slot No.4. 11.23 Viewing Wi-Fi Status Information Command function The viewing WiFi status information command is used to view the status of the Wi-Fi service. ONU No. right-click the appointed ONU in the ONU list tab at the right side of the GUI. GPON interface card containing the PON port — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — connected with the ONU. and select Get Information → Device Information in the shortcut menu.11 GUI Reference of a GPON Terminal Access method Click a GPON interface card in the object tree pane. The ID information of the equipment. Version: A 11-101 . Applicable object The HG260 supports this command. DI-Hardware The hardware version Version number. Then the Device Information window will appear. DI-Software The software version Version number. DI-Serial The serial number of the Number equipment. The Wi-Fi protection setting (WPS) is WPS-Status used to help subscribers set SSIDs and configure WPA data coding and authentication modes. The enabling status of the Wi-Fi radio interface. right-click the appointed ONU in the ONU list tab at the right side of the GUI. GPON interface card containing the PON port — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — connected with the ONU. and select Get Information → WIFI Information in the shortcut menu. port connected with the ONU. Version: A . The number of the PON PON No. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the Slot No. The authorization number of the ONU. ONU No. Then the WIFI Information window will appear. The Wi-Fi protection setting session status. WPS-Overlap WLAN-Enable 11-102 The Wi-Fi protection setting session overlap status.AN5516-06 Optical Line Terminal Equipment GUI Reference Access method Click a GPON interface card in the object tree. interface card containing the PON — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — — Read-only — port connected with the ONU. and select Get Information → WAN Information Static in the shortcut menu. Access method Click a GPON interface card in the object tree pane. Parameter Parameter Name Parameter Description Value Range / Requirement Property Configuration Method The slot number of the GPON Slot No. The number of the WAN connection.1p priority of the WAN connection.4. ONU No. Then the WAN Information Static window will appear. The 802. 11-103 . Applicable object The HG260 supports this command.24 Viewing WAN Connection Statistical Information Command function The viewing WAN connection information command is used to view the WAN connection status statistical information. The static IP address of the WAN connection. The IP address acquisition mode of the WAN connection. The name of the WAN connection. Indicates whether the QoS function of the WAN connection is enabled. Wan NO Wan_Name Wan_Vlan_ID Wan_CoS Wan_D_S_P Wan_QoS_Enable Wan_Status Wan_Ip_Address Version: A The number of the PON port that is connected with the ONU. right-click the appointed ONU in the ONU list tab at the right side of the GUI. The VLAN ID of the WAN connection. The status of the WAN connection.11 GUI Reference of a GPON Terminal 11. AN5516-06 Optical Line Terminal Equipment GUI Reference Parameter Name Wan_Ip_Subnet Wan_Gateway Wan_Master_DNS Wan_Slave_DNS 11-104 Parameter Description The subnet mask of the WAN connection. The default gateway of the WAN connection. Value Range / Requirement Property Configuration Method — Read-only — — Read-only — — Read-only — — Read-only — Version: A . The ISP-provided IP address of the slave DNS server. The ISP-provided IP address of the master DNS server. Please take a moment to complete this survey. How do you like the language style of the documentation?  Good  Normal  Poor (please specify) 3.Product Documentation Customer Satisfaction Survey Thank you for reading and using the product documentation provided by FiberHome. Is the information organized and presented clearly?  Very  Somewhat  Not at all (your advice) 2. Which documentation form do you prefer?  Print edition  Electronic edition  Other (please specify) Quality of the product documentation: 1. How often do you use the documentation?  Frequently  Rarely  Never  Other (please specify) 2. What is the percentage of the operations on the product for which you can get instruction from the documentation?  100%  80%  50%  0%  Other (please specify) 4. Are you satisfied with the promptness with which we update the documentation?  Satisfied  Unsatisfied (your advice) 5. Are any contents in the documentation inconsistent with the product? . Your answers will help us to improve the documentation and better suit your needs. Documentation Name Code and Version Usage of the product documentation: 1. please focus your answers on a single documentation or a complete documentation set. Your responses will be confidential and given serious consideration. Name Phone Number Email Address Company To help us better understand your needs. The personal information requested is used for no other purposes than to respond to your feedback. When do you use the documentation?  in starting up a project  in installing the product  in daily maintenance  in  Other (please specify) troubleshooting 3. com.4. Please fax or send the completed survey to us at the contact information included in the documentation. Additional comments about our documentation or suggestions on how we can improve: Thank you for your assistance. Which parts of the documentation are you unsatisfied with? Why? 9. Is the information complete in the documentation?  Yes  No (please specify) 5. how would you compare our documentation to them? Product documentations from other companies: Satisfied (please specify) Unsatisfied (please specify) 12. Which parts of the documentation are you satisfied with? 8. Are the product working principles and the relevant technologies covered in the documentation sufficient for you to get known and use the product?  Yes  No (please specify) 6. .cn. Thinking of the documentations you have ever read offered by other companies. What is your opinion on the layout of the documentation?  Beautiful  Unbeautiful (your advice) 11. If you have any questions or concerns about this survey please email at edit@fiberhome. What is your opinion on the Figures in the documentation?  Beautiful  Unbeautiful (your advice)  Practical  Unpractical (your advice) 10. Can you successfully implement a task following the operation steps given in the documentation?  Yes (please give an example)  No (please specify the reason) 7.