Alcatel_1353

Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation 3FL41020ACAAWBZZA Edition 1.00 TRAINING MANUAL Alcatel 1353NM - Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2005, Alcatel Copyright © 2005 by Alcatel - All rights reserved Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel Alcatel 1353NM rel. 7.4 Operation - Page 1 Legal Notice 2 Page 2 to Safety Switch Warning notes view! Both lethal and dangerous voltages are present within the equipment. Do not wear conductive jewelry while working on the equipment. Always observe all safety precautions and do not work on the equipment alone. Caution The equipment used during this course is electrostatic sensitive. Please observe correct anti-static precautions. Trade Marks Alcatel and MainStreet are trademarks of Alcatel. All other trademarks, service marks and logos (“Marks”) are the property of their respective holders including Alcatel. Users are not permitted to use these Marks without the prior consent of Alcatel or such third party owning the Mark. The absence of a Mark identifier is not a representation that a particular product or service name is not a Mark. Copyright This document contains information that is proprietary to Alcatel and may be used for training purposes only. No other use or transmission of all or any part of this document is permitted without Alcatel’s written permission, and must include all copyright and other proprietary notices. No other use or transmission of all or any part of its contents may be used, copied, disclosed or conveyed to any party in any manner whatsoever without prior written permission from Alcatel. Use or transmission of all or any part of this document in violation of any applicable Canadian or other legislation is hereby expressly prohibited. Alcatel 1353NM - Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2005, Alcatel User obtains no rights in the information or in any product, process, technology or trademark which it includes or describes, and is expressly prohibited from modifying the information or creating derivative works without the express written consent of Alcatel. Alcatel, The Alcatel logo, MainStreet and Newbridge are registered trademarks of Alcatel. All other trademarks are the property of their respective owners. Alcatel assumes no responsibility for the accuracy of the information presented, which is subject to change without notice. © 2005 Alcatel. All rights reserved. Disclaimer In no event will Alcatel be liable for any direct, indirect, special, incidental or consequential damages, including lost profits, lost business or lost data, resulting from the use of or reliance upon the information, whether or not Alcatel has been advised of the possibility of such damages. Mention of non-Alcatel products or services is for information purposes only and constitutes neither an endorsement nor a recommendation. Please refer to technical practices supplied by Alcatel for current information concerning Alcatel equipment and its operation. Alcatel 1353NM rel. 7.4 Operation - Page 2 Table of Contents 3 Page Page 3 Section Product Overview Switch to1notes view! Module 1.1 Product Overview 1.1.1 NR7 TMN Description 1.1.2 1353NM Management Functions 1.1.3 System Architecture 1.1.7 1.1.13 1.1.19 Section 2 Graphical Interface Module 2.1 How to Logon 2.1.1 Login and Workspace Front Panel 2.1.2 The TMN-OS Icon 2.1.3 Windows and Workspace Menu 2.1.7 2.1.13 2.1.21 2.2.7 2.2.19 2.2.21 2.2.35 2.2.55 2.2.105 2.2.111 2.2.127 2.2.139 2.2.145 2.2.151 2.2.161 All rights reserved © 2005, Alcatel Module 2.2 Network Topology 2.2.1 Creating a Map 2.2.2 Managing and Addressing a NE on a Map 2.2.2.1 Creating and Addressing a Q3 NE 2.2.2.2 Creating and Addressing ISA boards 2.2.2.3 Creating and Addressing a 1850TSS NE Alcatel 1353NM - Alcatel 1353NM rel. 7.4 Operation 2.2.2.4 Creating and Addressing a SNMP NE 2.2.2.5 NE Autodiscovery 2.2.2.6 Map Population 2.2.3 Creating a Graphical Connection 2.2.4 Creating the GNE List 2.2.5 Addressing the NEs with IP Tunnel: OSI over IP 2.2.6 Distributing Maps Section 3 System Operation Module 3.1 NE Supervision 3.1.1 Displaying NE Management and Alarm State 3.1.2 Modifying the management State of a NE 3.1.3 Simulator 3.1.4 Schedule a MIB Backup 3.1.5 Backing up/Restoring the MIB 3.1.7 3.1.21 3.1.39 3.1.49 3.1.57 3.2.7 3.2.13 3.2.23 3.2.27 3.2.47 3.2.53 Module 3.2 NE Management 3.2.1 NE Time management from the 1353NM 3.2.2 Performing a Remote Inventory 3.2.3 Resetting a NE 3.2.4 Downloading Software to the NE 3.2.5 List Abnormal Conditions 3.2.6 Event Log Archiving Alcatel 1353NM rel. 7.4 Operation - Page 3 Table of Contents [cont.] 4 Page Page 4 Section Maintenance Application Switch to4notes view! Module 4.1 Alarm Management 4.1.1 Displaying Current Alarms 4.1.2 Alarm Debouncing 4.1.3 Creating, Modifying and Deleting and Alarm Sublist 4.1.4 Performing Actions on Current Alarms 4.1.5 Displaying the Alarm History 4.1.6 Handling the AS Facility 4.1.7 Administrating the AS 4.1.7 4.1.19 4.1.27 4.1.39 4.1.47 4.1.57 4.1.67 4.2.7 4.2.19 4.2.27 4.2.33 Module 4.2 Performance Management 4.2.1 Definition of Counters 4.2.2 Configuring Performance Points 4.2.3 Displaying Performance Data 4.2.4 Performance Reports Section 5 Administration Features Module 5.1 Administration for Operators Alcatel 1353NM - Alcatel 1353NM rel. 7.4 Operation 2.1.1 Login and Workspace Front Panel 2.1.2 The TMN-OS Icon 2.1.3 Windows and Workspace Menu 2.1.7 All rights reserved © 2005, Alcatel 2.1.13 2.1.21 Alcatel 1353NM rel. 7.4 Operation - Page 4 Course Objectives 5 Page 5 Switch to notes view! Welcome to Alcatel 1353NM rel. 7.4 Operation After successful completion of this course, you will be able to: Identify and localize the system functions into the TMN Describe the system architecture Login, start the TMN-OS icon, start the main applications of the 1353NM Create a network topology including Q3, 1850TSS and SNMP NEs Supervise a Q3, 1850TSS-320 and SNMP Network Element Perform the basic management operations on Q3, 1850TSS-320 and SNMP NE management Handle the AS application for current alarms and the alarm history Manage the transmission quality records Perform the basic administration tasks in the operator field Alcatel 1353NM - Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2005, Alcatel Alcatel 1353NM rel. 7.4 Operation - Page 5 Course Objectives [cont.] 6 Page 6 Switch to notes view! Alcatel 1353NM - Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2005, Alcatel This page is left blank intentionally Alcatel 1353NM rel. 7.4 Operation - Page 6 About this Student Guide 7 Conventions used in this guide Switch to notes view! Note Page 7 Provides you with additional information about the topic being discussed. Although this information is not required knowledge, you might find it useful or interesting. Technical Reference (1) 24.348.98 – Points you to the exact section of Alcatel Technical Practices where you can find more information on the topic being discussed. Warning Alerts you to instances where non-compliance could result in equipment damage or personal injury. Alcatel 1353NM - Alcatel 1353NM rel. 7.4 Operation Where you can get further information If you want further information you can refer to the following: Technical Practices for the specific product Technical support page on the Alcatel website: http://www.alcatel.com All rights reserved © 2005, Alcatel Alcatel 1353NM rel. 7.4 Operation - Page 7 About this Student Guide [cont.] 8 Page 8 Switch to notes view! Alcatel 1353NM - Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2005, Alcatel This page is left blank intentionally Alcatel 1353NM rel. 7.4 Operation - Page 8 Self-Assessment of Objectives Contract number : Course title : 9 Page 9 Client (Company, Center) : Language : At the end of each section you will be asked to fill this questionnaire Please, return this sheet to the trainer at the end of the training Switch to notes view! Dates from : Location : to : Number of trainees : Surname, First name : Did you meet the following objectives ? Tick the corresponding box Please, return this sheet to the trainer at the end of the training Yes (or globally yes) No (or globally no) Instructional objectives 1 • • 2 • To be able to Identify and localise the system functions into the TMN Describe the system architecture Comments To be able to Login, start the TMN-OS icon, start the Alcatel 1353NM - Alcatel 1353NM rel. Operation main application of7.4 1353NM 3 To be able to • Create a network topology including Q3, 1850TSS and SNMP NEs 4 To be able to Supervise a Q3, 1850TSS-320 and SNMP • Network Element 5 To be able to • Perform the basic management operations on Q3, 1850TSS-320 and SNMP NE management 6 To be able to Handle the AS application for current • alarms and the alarm history 7 • 8 • To be able to Manage the transmission quality records To be able to Perform the basic administration tasks in the operator field All rights reserved © 2005, Alcatel Alcatel 1353NM rel. 7.4 Operation - Page 9 Self-Assessment of Objectives [cont.] 10 Page 10 Switch to notes view! Instructional objectives Yes (or Globally yes) No (or globally no) Comments Alcatel 1353NM - Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2005, Alcatel Other comments Thank you for your answers to this questionnaire Alcatel 1353NM rel. 7.4 Operation - Page 10 00 Section 1 .Page 1 .Module 1 . 7.Section 1 Product Overview Module 1 Product Overview 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.00 Alcatel 1353NM . Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006.Alcatel 1353NM rel. Module 1 .00 Section 1 .Page 2 .4 Operation This page is left blank intentionally All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.Product Overview 1-1- 2 Alcatel 1353NM Alcatel 1353NM rel. 7. Alcatel Document History Edition 01 Date 2007-02-07 Author Sangalli Roberto Remarks First edition All rights reserved © 2006.Blank Page Product Overview . 00 Section 1 .4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006.Page 3 .Objectives Product Overview .Product Overview 1-1- 3 Objective: To be able to identify and localise the system functions into the TMN describe the system architecture Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1. 7.Module 1 . 00 Section 1 .Module 1 .Objectives [cont.Product Overview 1-1- 4 Alcatel 1353NM Alcatel 1353NM rel.Page 4 .] Product Overview . 7. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006.4 Operation This page is left blank intentionally All rights reserved © 2006. Alcatel All rights reserved © 2006.Module 1 .Page 5 .Table of Contents Product Overview . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 1 .Product Overview 1-1- 5 Switch to notes view! 1 TMN Description 2 1353NM Management Functions 3 System Architecture Page 7 15 23 Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006. 7. Module 1 .Table of Contents [cont.Product Overview 1-1- 6 Switch to notes view! Alcatel 1353NM Alcatel 1353NM rel. 7. Alcatel All rights reserved © 2006.] Product Overview .4 Operation This page is left blank intentionally All rights reserved © 2006.Page 6 .00 Section 1 . Alcatel 3FL41020ACAAWBZZA Edition 1. Page 7 . Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.Product Overview 1-1- 7 1 TMN Description Alcatel 1353NM Alcatel 1353NM rel.Product Overview .00 Section 1 . 7.Module 1 . 4 Operation All rights reserved © 2006.1 TMN description The TMN Product Overview . Alcatel 1353NM belongs to the EML 1354RM belongs to the NML All rights reserved © 2006. service handling. market analysis Alcatel 1353NM Alcatel 1353NM rel.Product Overview 1-1- 8 A Telecommunication Management Network (TMN) is a structured network featuring management functions for a Telecommunication Network (TN) The TMN is structured in layers EML: Element Management Layer To manage the network element configuration. system decision support. return on investment. Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 1 .Page 8 . service development. routing and protections in various topologies and across different regions SML: Service Management Layer To manage services offered to the customer: order handling. billing. planning BML: Business Management Layer To manage the overall sales activity: e. 7. alarms and performance NML: Network Management Layer To manage network connectivity.g.Module 1 . 2 (**) 1540SDH starting from Rel. Radio SONET. (*) 1664SM and 1666-55SR starting from Rel 3. WDM F ISA.g.Product Overview 1-1- 9 NML 1354RM Interface IOO OPTICS-IM / SEN-IM EML Q3/SNMP Q3 Q3 1353NM Q3 1540 CT DXC CT Interface IOO QB3* 1320NX NECTAS SNMP 1320 CT ECT 1320 CT F 2G ADM(*). protections. EML Element Management Layer The whole NE configuration can be managed from this layer on an individual basis: hardware. alarms. Furthermore the NML is in charge of Network Alarms and Performance Monitoring. The Alcatel EML layer is made of 1353NM (centralised system) NML Network Management Layer The system belonging to this layer allows the operators to manage connectivity. Melodie(****). Alcatel NE 4G 1850TSS Litespan(**) OMSG F Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.1 TMN description TMN Layers Product Overview .. 2. synchronisation.1B (***) 1692MSP (****) 946LUX50 All rights reserved © 2006. It represents the physical media ensuring the transmission function (e. The Alcatel NML layer is made of 1354R (centralised system) . OMSN. CWDM(***).00 Section 1 . ECT Equipment Craft Terminal for local management TN Telecommunication Network This network is made of interconnected NEs .4 Operation NE Network Element PDH or SDH Transmission equipment.: STM16 ring made of 1660SM OMSNs). crossconnections. WDM.Module 1 .Page 9 . 2G Radio F Subm. TMN Telecommunication Management Network This management network is made of 5 layers. Only EML and NML are referred in this document. AWY. Terr. 7.. ION. All rights reserved © 2006. performance. routing (trails and paths) and the relevant protections in various topologies. 0. still managed due to the long-term support required by these NEs (*) (**) (***) (****) (*****) 1664SM and 1666-55SR starting from Rel 3.4 doesn’t support anymore the 1G QB3* NEs.Module 1 . that are: 1G ADM 1G MW 1G WDM The only exception are the QB3* Submarine WDM. OA512 Rel1. WDM OMSG Litespan(**) Alcatel 1353NM Alcatel 1353NM rel. 7.Product Overview 1-1- 10 1353NM 1353NM OSI QB3* interface OSI CMIP interface IP SNMP interface IP CMIP interface OSI CMIP + IP SNMP interface CWDM(***) Submarine WDM ISA AWY 4G 1850TSS Melodie(****) Radio SONET 3rd party NEs(*****) 2G ADM(*) OMSN ION MW 2G Terr.0.0. 2. Selta 1615BCE R1. LightSand 1693SE R1.Page 10 .1B 1692MSP 946LUX50 LineView Rel2. Alcatel 3FL41020ACAAWBZZA Edition 1. LightSand 1696SE R1.0.0.00 Section 1 .0 All rights reserved © 2006.2 1540SDH starting from Rel.1 TMN description NEs managed by the 1353NM7 Product Overview . Tropic Networks 1696ROADM R4.4 Operation All rights reserved © 2006. Alcatel 1353NM Rel7. Aimsys 1608LS R1.0. Stratex Networks A9500MXC R1.0. 4 EMLIMWDMSUBNR7: EMLIMADMQ3: EMLIMDXCQ3: EMLIMCORBASNMP: EMLIMSGM: EMLIM4G: EMLIM9500MXC: Information Manager for QB3* Submarine WDM Information Manager for NEs managed via the OSI CMIP-Q3 interface Information Manager for OMSG (Digital cross connect) managed via the IP CMIP-Q3 interface Information Manager for NEs managed via the IP SNMP interface SNMP Generic Mapper. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel EML IMs available in 1353NM Rel7.00 Section 1 . 7. It is responsible for managing NEs of different types and releases There are several EML IM classes per 1353NM (see notes).Product Overview 1-1- 11 The NEs are managed from the 1353NM via EML IM The EML IM is responsible for maintaining a consistent view of the NE configuration and status.Module 1 .1 TMN description EML-IM Product Overview .Page 11 . created during the system installation and configuration Alcatel 1353NM Alcatel 1353NM rel. Each EML IM classes can have several instances. Information Manager for some 3rd party NEs managed via the IP SNMP interface Information Manager for 4G NEs Information Manager for Microwave Radio Equipment 9500MXC managed via the IP SNMP interface All rights reserved © 2006.4 Operation All rights reserved © 2006. : 1353NM Rel7.4 doesn’t support anymore the 1G QB3* NEs. 7.00 Section 1 . The only exception are the QB3* Submarine WDM. still managed due to the long-term support required by these NEs All rights reserved © 2006.4 Operation All rights reserved © 2006.1 TMN description QB3* / Q3 NE Product Overview . Alcatel N.Product Overview 1-1- 12 QB3* NE NE local configuration based on NECTAS tables Requires translation between NECTAS tables and OS object management Duplication of configuration database (MIB) in NE and in OS Q3 NE NE local configuration based on object management Only one database in the NE Any modification is performed directly on the NE Alcatel 1353NM Alcatel 1353NM rel.Module 1 . Alcatel 3FL41020ACAAWBZZA Edition 1.B.Page 12 . Module 1 .00 Section 1 . Alcatel The 1353NM acts as a pass-through for messages from/to 1354RM to/from Q3 NEs.Page 13 . Alcatel 3FL41020ACAAWBZZA Edition 1.1 TMN description NE QB3*/Q3 .x).Product Overview 1-1- 13 RM SEN-IM USM DB TSD-IM USM 1 PNM 1 2 QB3* EML-IM SH-IM Nectas tables 2 TSD-IM USM AS DB AS-IM PNM-IM PNM-IM SH-IM MIB 1 Q3 EML-IM 2 SH 3 QB3* 4 TSD-IM Q3 Nectas tables ADM NE DB Alcatel 1353NM Alcatel 1353NM rel. So the 1353NM does not need to know all the implementation details of all NE types and releases. All rights reserved © 2006. including unchanged information. as in the NR3. 7. This improves 1354RM performance with the NEs.4 Operation All rights reserved © 2006. and only this configuration request is sent to the Q3 NE (not the configuration tables. Each single configuration request from the 1354RM does not require mapping in the 1353NM.OS dialogue Product Overview . Consistency checks on the required operation are performed by the NE itself. Alcatel This page is left blank intentionally All rights reserved © 2006.Blank Page Product Overview .Product Overview 1 . 7.Module 1 .1 .14 Alcatel 1353NM Alcatel 1353NM rel.Page 14 . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.00 Section 1 . 00 Section 1 .4 Operation All rights reserved © 2006.Page 15 .Product Overview 1-1- 15 2 1353NM Management Functions Alcatel 1353NM Alcatel 1353NM rel. 7.Product Overview . Alcatel All rights reserved © 2006.Module 1 . Alcatel 3FL41020ACAAWBZZA Edition 1. 7.2 1353NM Management Functions Network Topology Functions Product Overview . Alcatel Network Topology Management Creating the topology Adding/deleting symbols Declaring NEs NE inventory All rights reserved © 2006.Product Overview 1-1- 16 Network Topology Management Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 1 .Page 16 .4 Operation All rights reserved © 2006.Module 1 . Alcatel Network Element Management Supervising NEs Swapping boards and subracks Configuring protection plans Enabling/disabling alarm notifications Configuring the alarm severity profile Managing NE time and synchronisation sources Managing interconnections Managing ports Configuring external points Backing up and restoring the NEs configuration Software management Get information on software downloaded to the NE Downloading software from a server to an NE Activating / deactivating NE software Commissioning NE software All rights reserved © 2006.Page 17 .Product Overview 1-1- 17 Network Element Management Software Management Alcatel 1353NM Alcatel 1353NM rel.2 1353NM Management Functions Network Element and Software Management Functions Product Overview . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.Module 1 .00 Section 1 . 7. Product Overview 1-1- 18 Alarms Management Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 1 .2 1353NM Management Functions Alarm Functions Product Overview .4 Operation All rights reserved © 2006.Module 1 . Alcatel Alarms Management Receiving and processing alarms Setting up filter criteria for receiving alarms Managing alarm log files Internal storage and processing of current alarms information Internal storage and processing of alarm history information User interface service for display purposes Alarms represented summarily in all views concerning an entity All rights reserved © 2006. 7.Page 18 . Alcatel 3FL41020ACAAWBZZA Edition 1.Product Overview 1-1- 19 Performance Monitoring Management Alcatel 1353NM Alcatel 1353NM rel.2 1353NM Management Functions Performance Functions Product Overview .Page 19 . 7.4 Operation All rights reserved © 2006.Module 1 .00 Section 1 . Alcatel Performance Monitoring Management Configuring the error counters threshold Monitoring performance counters Logging performance data Search for degraded quality TP All rights reserved © 2006. Page 20 .Product Overview 1-1- 20 System Management Security Management 1353NM Alcatel 1353NM Alcatel 1353NM rel. 7.Module 1 .4 Operation All rights reserved © 2006.2 1353NM Management Functions System administration Functions Product Overview . Alcatel System Management (for the administrator) Starting/stopping the system System trace and logs Displaying and managing all 1353NM processes System Backup/Restore Periodic actions Security Management Accessing the system Assigning profiles Distributing maps Access rights to the NE All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 1 . Product Overview 1-1- 21 STM/16 2400Mb/s STM/4 600Mb/s Interconnected rings Network management • Topology management • Routing provisioning • Protections management • Alarm management • Performance Monitoring • System administration Alcatel 1353NM Alcatel 1353NM rel. Alcatel Upload of available NE and Port information from the 1353NM7 Construction of the ‘static’ part of the managed network Link Connections Elementary topologies (rings.2 1353NM Management Functions Functions of the 1354RM Product Overview .Module 1 . . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 1 . LO trails.4 Operation Meshed subnetworks STM/4 600Mb/s STM/1 150 Mb/s Cross Connect/ION ADM. 7. Paths Configuring and managing the ‘dynamic’ part of the network Payload configuration Path provisioning Path supervision and maintenance Join / Split Consistency control of SEN-IM and OPTICS-IM based NEs Download disable management Consistency audit and download management NE isolation detection and recovery Protections management SNCP Drop & Continue 2F MS-SPRING and NPE Restoration rules ASON/GMRE management on ION nodes Performance Monitoring Customised measures creation and analysis Alarms Management Alarm severity management (ASAP) Alarm monitoring and records management “Northbound Interface” management (ioo) All rights reserved © 2006. Multiplex section.. OMSN and WDM NEs STM/1 150 Mb/s Linear chain All rights reserved © 2006.. HO trails. meshes. 803 Physical.Page 21 .) Applying the ‘layered concept’ according to G. Two different services are provided Solicited service. All rights reserved © 2006. Alcatel Ioo is an interface allowing the synchronization between an external application and the Alcatel Transmission Management Network application.2 1353NM Management Functions IOO interface Functions Product Overview . Performance monitoring The Ioo is able to export Performance Monitoring data (through a socket based ASCII interface or FTP) using either CSV or AVA formats. Remote Inventory The Ioo is able to export the Remote Inventory of Network Elements managed by the 1353NM product. The EOS registers itself to receive automatically all the new data. The Ioo interface can export • The list of TPs where PM has been activated • The actual PM measurements data. together with their main attributes and states. Network directory The Ioo is able to export the list of Network Elements managed by the 1353NM product. Alcatel 3FL41020ACAAWBZZA Edition 1.Page 22 .4 Operation All rights reserved © 2006.Module 1 . Alarms The Ioo is able to export alarms (throughout SNMP or a socket based ASCII interface) using either CSV or AVA formats. 7. The EOS can ask for the current alarm list.Product Overview 1-1- 22 NML Alcatel Transport Network NML External OS Access Access Network Network EML IOO interface switching switching Network Network Data Data Network Network 1353NM Alarms Performance Monitoring Network Directory Remote Inventory 1354RM Alcatel 1353NM Alcatel 1353NM rel.00 Section 1 . and then receive alarms in unsolicited way. The EOS requests the data as soon as it is interested in. Unsolicited service. 00 Section 1 .4 Operation All rights reserved © 2006.Product Overview 1-1- 23 3 System Architecture Alcatel 1353NM Alcatel 1353NM rel.Page 23 . Alcatel All rights reserved © 2006.Product Overview . 7.Module 1 . Alcatel 3FL41020ACAAWBZZA Edition 1. different levels of resilient configurations can be provided on servers. Access to the system is provided using PCs through “Go-Global” software.Module 1 . providing the best cost performance ratio depending on the managed network size. cold standby systems.00 Section 1 . warm active/standby systems and remote crash recovery centre. Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006.3 System Architecture Hardware architecture Product Overview . ranging from simple disk mirroring.4 Operation All rights reserved © 2006.Product Overview 1-1- 24 Hardware-Architecture Alcatel 1353 NM may run on a scalable set of computers ranging from small to large servers. 7.Page 24 . High Availability In order to provide high service availability. 3 System Architecture Hardware architecture Product Overview .00 Section 1 .Module 1 . 7.Page 25 . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation NE All rights reserved © 2006.Product Overview 1-1- 25 1353NM Master Server LAN 1353NM Presentation Server QB3*/Q3 GNE QECC*/ QECC STM-n (Gateway Network Element) NE PC Alcatel 1353NM Alcatel 1353NM rel. Alcatel The 1353NM system can be installed as: A master server (to run the IM and USM processes) A presentation station (to run the USM processes only) PCs running Windows NT/2000/XP and Go-Global can be used to access remotely the 1353NM All rights reserved © 2006. 4 Operation All rights reserved © 2006.Product Overview 1-1- 26 IM Server USM Server PCs Alcatel 1353NM Alcatel 1353NM rel.Page 26 .3 System Architecture Hardware architecture [cont.] Product Overview . Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006.00 Section 1 . 7.Module 1 . Page 27 .3 System Architecture Software architecture Product Overview . the 1353NM is composed of two subsystems: User Service Manager (USM) This subsystem interacts with the user.Product Overview 1-1- 27 From the software point of view. Alcatel All rights reserved © 2006. 7. Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006. processing his requests and issuing them to the appropriate IM subsystem.Module 1 . Information Manager (IM) This subsystem handles the logical functional data processing and its persistency This subdivision is reflected in the installation (Master and Presentation servers) Alcatel 1353NM Alcatel 1353NM rel.00 Section 1 . Module 1 . Alcatel 3FL41020ACAAWBZZA Edition 1. there is no need to add new TMN HW dedicated to QB3* management when migrating to NM7.4 co-hosting Due to QB3* dismission in Release 7.7. The Presentation server (USM) A Presentation server can provide the presentation instances for 1353NM and 1354RM.3 System Architecture Software architecture [cont.4.4. 1353NM rel.Page 28 . 7.] Product Overview .4 Operation All rights reserved © 2006.3 and 7.4 master and presentation instances shall be able to run over the same HW platform.( for example 1 1353NM and 1 1354RM) 1 server for each instance.Product Overview 1-1- 28 The Master Server (IM) 2 types of architecture can be chosen to install the TMN system: 1 server where many “instances” of 1353NM and 1354RM can coexist. 7.3 and rel.00 Section 1 . Alcatel All rights reserved © 2006. 1353NM rel. Alcatel 1353NM Alcatel 1353NM rel. In this way. 7. 7. Alcatel All rights reserved © 2006.Page 29 .Module 1 .Product Overview 1-1- 29 Exercise 1: TMN description Exercise 2: TN description Alcatel 1353NM Alcatel 1353NM rel.00 Section 1 .4 Operation All rights reserved © 2006.Exercise Product Overview . Alcatel 3FL41020ACAAWBZZA Edition 1. Module 1 . 7.Exercise 1: TMN description Product Overview .Page 30 . Alcatel 3FL41020ACAAWBZZA Edition 1.Product Overview 1-1- 30 Draw here below the TMN available for the training: 1353NM servers (master and presentation if any) Bridges PCs DCN (LAN.4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006. Hubs and routers if any) Alcatel 1353NM Alcatel 1353NM rel.00 Section 1 . Product Overview 1-1- 31 Draw here below the TN structure available for the training: Ring. 7. meshed or linear topologies OMSNs. Alcatel 3FL41020ACAAWBZZA Edition 1. ISA or 4G 1850TSS GNE(s) Alcatel 1353NM Alcatel 1353NM rel.Module 1 .Exercise 2: TN description Product Overview .00 Section 1 .4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006.Page 31 . 7.00 Section 1 .4 Operation All rights reserved © 2006.Page 32 . Alcatel All rights reserved © 2006.Module 1 .Product Overview 1-1- 32 End of Module Product Overview Alcatel 1353NM Alcatel 1353NM rel.Product Overview . Alcatel 3FL41020ACAAWBZZA Edition 1. Module 1 .4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. 7. Alcatel All rights reserved © 2006.Section 2 Graphical Interfaces Module 1 How to Logon 3FL41020ACAAWBZZA Edition 1.Page 1 .00 Section 2 .00 Alcatel 1353NM .Alcatel 1353NM rel. Alcatel This page is left blank intentionally Document History Edition 01 Date 2007-02-07 Author Sangalli Roberto Remarks First edition All rights reserved © 2006.Module 1 .4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.How to Logon 2-1-2 Alcatel 1353NM Alcatel 1353NM rel.Blank Page Graphical Interfaces .00 Section 2 .Page 2 . 7. 4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006.Objectives Graphical Interfaces .How to Logon 2-1-3 Objectives: to be able to Login. 7. start the main applications of 1353NM Alcatel 1353NM Alcatel 1353NM rel.Page 3 .00 Section 2 . start the TMN-OS icon. Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 . Alcatel This page is left blank intentionally All rights reserved © 2006.Objectives [cont. 7.How to Logon 2-1-4 Alcatel 1353NM Alcatel 1353NM rel.Module 1 . Alcatel 3FL41020ACAAWBZZA Edition 1.Page 4 .4 Operation All rights reserved © 2006.00 Section 2 .] Graphical Interfaces . Module 1 .4 Operation All rights reserved © 2006.How to Logon 2-1-5 Switch to notes view! 1 Login and Workspace Front Panel 2 The TMN-OS Icon 3 Windows & Workspace Menu Page 7 13 21 Alcatel 1353NM Alcatel 1353NM rel.00 Section 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.Page 5 .Table of Contents Graphical Interfaces . 7. Alcatel All rights reserved © 2006. Page 6 .Table of Contents [cont. 7.How to Logon 2-1-6 Switch to notes view! Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 . Alcatel All rights reserved © 2006.4 Operation This page is left blank intentionally All rights reserved © 2006.Module 1 .] Graphical Interfaces . 00 Section 2 . 7.Page 7 .Module 1 .How to Logon 2-1-7 1 Login and Workspace Front Panel Alcatel 1353NM Alcatel 1353NM rel.Graphical Interfaces . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006. How to Logon 2-1-8 1.1 Login and Workspace Front Panel Access from PC with Go-global Graphical Interfaces . the user can open the 1353NM session without providing any additional login. See the following figure as example Windows XP look and feel All rights reserved © 2006. Give the server address and click on connect 3. 7. also “Alcatel TMN Oss” can be chosen. instead of “Normal Desktop”. Alcatel At step 2. In this latter case. instead of Unix X-Windows. The PC Windows user interface look and feel is then used for managing the session. Double click on the Go-global icon on the desk 2. Launch Normal Desktop Alcatel 1353NM Alcatel 1353NM rel.00 Section 2 .Module 1 .Page 8 . Alcatel 3FL41020ACAAWBZZA Edition 1. Give username and password to access the server and click OK 4.4 Operation All rights reserved © 2006. Module 1 .Page 9 . All rights reserved © 2006. Alcatel OK Start Over Options Help confirms deletes input changes session option (to log onto single windows for example) opens the help window The default user defined on the systems is: alcatel It has the administrator privileges. 7. Alcatel 3FL41020ACAAWBZZA Edition 1.1 Login and Workspace Front Panel Login screen Graphical Interfaces .4 Operation All rights reserved © 2006. The former “axadmin” must not be used as administrator for graphical session.00 Section 2 .How to Logon 2-1-9 Work Station name Login name Push buttons Enter “user name” then click “ OK” or press "Enter" key Enter "password" then click "OK" or press "Enter" key Alcatel 1353NM Alcatel 1353NM rel. Other users with different profiles can be created by the administrator. How to Logon 2 .4 Operation All rights reserved © 2006.10 Ws activity Clock Date Padlock Workspaces File manager TMN OS Text editor Exit Printer Mail Terminal Alcatel 1353NM Alcatel 1353NM rel.Module 1 . Alcatel 3FL41020ACAAWBZZA Edition 1. 7.Page 10 . Alcatel Only admin profiles can access "file manager" and "terminal" files. All rights reserved © 2006.1 .1 Login and Workspace Front Panel Graphical Interfaces .00 Section 2 . Module 1 .1 .How to Logon 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.1 Login and Workspace Front Panel Locking the session Graphical Interfaces . Alcatel All rights reserved © 2006.11 Manual lock is used to lock the screen immediately select the padlock icon in the front panel When the session is locked. enter the password and press Enter key to continue the job Alcatel 1353NM Alcatel 1353NM rel.00 Section 2 .4 Operation All rights reserved © 2006. 7.Page 11 . Blank Page Graphical Interfaces .4 Operation All rights reserved © 2006. Alcatel This page is left blank intentionally All rights reserved © 2006. 7. Alcatel 3FL41020ACAAWBZZA Edition 1.How to Logon 2-1- 12 Alcatel 1353NM Alcatel 1353NM rel.Module 1 .Page 12 .00 Section 2 . 1 .13 2 The TMN-OS Icon Alcatel 1353NM Alcatel 1353NM rel.Graphical Interfaces .00 Section 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 .4 Operation All rights reserved © 2006.How to Logon 2 . 7.Page 13 . Alcatel All rights reserved © 2006. 4 Operation All rights reserved © 2006. All rights reserved © 2006. 7.2 The TMN-OS Icon Graphical Interfaces . The 1353NM is selected Alcatel 1353NM Alcatel 1353NM rel. Alcatel The color of each icon depends on the OS process state: Green: all the processes are running Red: at least one process is not running Blue: all the processes are stopped Yellow: the process state is unknown.Page 14 . It may be due to a isolation condition. Alcatel 3FL41020ACAAWBZZA Edition 1.How to Logon 2 .14 The TMN-OS icon is the starting point for all the operation and administration actions that can be done on the instances installed on the server.1 .Module 1 . The menus & icons are context sensitive. All the instances installed on the server are displayed.00 Section 2 . 2 The TMN-OS Icon Graphical Interfaces . Alcatel System configuration.Module 1 .00 Section 2 .4 Operation All rights reserved © 2006. Process monitoring and 1353NM Admin are Administrative functions System information: gives infos about the installed product version Alarms: starts the alarm surveillance tool. 7. Alcatel 3FL41020ACAAWBZZA Edition 1.Page 15 . Performance Monitoring: starts the Performance Monitoring viewer All rights reserved © 2006.15 Performance monitoring Exit System configuration Topology manager Alarms Process monitoring System information 1353NM Admin Alcatel 1353NM Alcatel 1353NM rel.How to Logon 2 . Topology Manager: opens the graphical interface for managing Maps and NEs.1 . 4 Operation All rights reserved © 2006.Page 16 .Module 1 .1 .How to Logon 2 . 7.00 Section 2 .16 This menu permits to hide/show the message area. Alcatel All rights reserved © 2006. Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1. This are administrative functions.2 The TMN-OS Icon View and OS Menus Graphical Interfaces . They depend on the user profile. Module 1 .4 Operation All rights reserved © 2006.00 Section 2 .2 The TMN-OS Icon Action menu Graphical Interfaces . The SMF depends on the user profile. Alcatel 1353NM Alcatel 1353NM rel. 7.1 .Page 17 .How to Logon 2 .17 This menu permits to start the main operations available on the 1353NM. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006. 18 This menu is common to the 1353NM and 1354RM.00 Section 2 . Alcatel 1353NM Alcatel 1353NM rel.Page 18 .Module 1 .How to Logon 2 . 7.4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006.2 The TMN-OS Icon Global action menu Graphical Interfaces . It contains mainly administrative functions. Alcatel 3FL41020ACAAWBZZA Edition 1.1 .It permits for example to define new operators on the systems. 1 .00 Section 2 . 7.How to Logon 2 .4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006.Page 19 .Module 1 .2 The TMN-OS Icon Close 1353NM session Graphical Interfaces . Alcatel 3FL41020ACAAWBZZA Edition 1.19 First possibility: with the workspace menu Place the mouse in an empty place on the workspace Click on the left mouse button Select “Log-out” Second possibility: with the control panel Select the "exit" button on the control panel Remember : close all the graphical applications before closing the session Alcatel 1353NM Alcatel 1353NM rel. How to Logon 2-1- 20 Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 .Page 20 . Alcatel This page is left blank intentionally All rights reserved © 2006.Blank Page Graphical Interfaces . 7.Module 1 .4 Operation All rights reserved © 2006. 00 Section 2 .1 .4 Operation All rights reserved © 2006.Page 21 .21 3 Windows & Workspace Menu Alcatel 1353NM Alcatel 1353NM rel. 7.Module 1 .How to Logon 2 .Graphical Interfaces . Alcatel All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel 3FL41020ACAAWBZZA Edition 1.3 Window & Workspace Menu Window menu button Graphical Interfaces .1 .Page 22 .How to Logon 2 . 7.00 Section 2 . click on the upper left corner The following menu appears: Restore the default size of the window Move the current window in the screen Resize the current window in all directions Minimize the window Full screen window Put the window in the back of others Display the window in the selected workspace Display the window in all workspace Window is removed from the current workspace Close the current window Alcatel 1353NM Alcatel 1353NM rel. Alcatel All rights reserved © 2006.22 On an opened window.4 Operation All rights reserved © 2006.Module 1 . How to Logon 2 . The following menu appears: Starts the TMN-OS icon Opens a Unix terminal (for OS Admin only) Prints the screen or a window Alcatel 1353NM Alcatel 1353NM rel.Module 1 . 7. Press the right-hand button of the mouse.23 Locate the mouse pointer on the background (i.4 Operation All rights reserved © 2006.e.00 Section 2 .3 Window & Workspace Menu Workspace menu Graphical Interfaces .1 . Alcatel 3FL41020ACAAWBZZA Edition 1.Page 23 . Alcatel All rights reserved © 2006. outside any window). How to Logon 2 .Page 24 . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006. 7. Press the left-hand button of the mouse. Alcatel All rights reserved © 2006.Module 1 . outside any window).1 .3 Window & Workspace Menu Graphical Interfaces .e.24 Locate the mouse pointer on the background (i. The following menu appears: Pops up the selected window Pops down the selected window Minimize the front panel: useful when the task bar is enabled Alcatel 1353NM Alcatel 1353NM rel.00 Section 2 . 1 .Exercise Graphical Interfaces . Alcatel All rights reserved © 2006.Page 25 .00 Section 2 .Module 1 .How to Logon 2 .25 Exercise 1: Explore the TMN-OS icon for the 1354RM instance See next pages Alcatel 1353NM Alcatel 1353NM rel. 7. Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006. Start and stop the following applications: User Interface Alarms 5. 6.1 . Explore the icons and menus. Identify the software release of the 1353NM system. Open the TMN-OS icon 3.Exercise 1: Explore the TMN-OS icon for the 1354RM instance Graphical Interfaces .4 Operation All rights reserved © 2006. 7.How to Logon 2 . Alcatel 3FL41020ACAAWBZZA Edition 1. Manually lock and unlock the session Alcatel 1353NM Alcatel 1353NM rel.26 1. 4. Log on the 1354RM system. 2.00 Section 2 .Module 1 . Alcatel All rights reserved © 2006. Move a window from one workspace to another one.Page 26 . 7. Alcatel This page is left blank intentionally All rights reserved © 2006.00 Section 2 .4 Operation All rights reserved © 2006.How to Logon 2-1- 27 Alcatel 1353NM Alcatel 1353NM rel.Blank Page Graphical Interfaces . Alcatel 3FL41020ACAAWBZZA Edition 1.Page 27 .Module 1 . Graphical Interfaces .28 End of Module How to Logon Alcatel 1353NM Alcatel 1353NM rel.Page 28 .How to Logon 2 .00 Section 2 . Alcatel All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 .4 Operation All rights reserved © 2006.1 . 7. Section 2 Graphical Interfaces 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.00 Module 2 Network Topology Alcatel 1353NM .00 Section 2 .Alcatel 1353NM rel.Page 1 . Alcatel All rights reserved © 2006. 7.Module 2 . Alcatel 3FL41020ACAAWBZZA Edition 1. Page 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 .4 Operation All rights reserved © 2006.Blank Page Graphical Interfaces .Network Topology 2-2-2 Alcatel 1353NM Alcatel 1353NM rel. Alcatel This page is left blank intentionally Document History Edition 01 Date 2007-02-07 Author Sangalli Roberto Remarks First edition All rights reserved © 2006.Module 2 . 7. Module 2 . 1850TSS and SNMP NEs Alcatel 1353NM Alcatel 1353NM rel.Objectives Graphical Interfaces .Network Topology 2-2-3 Objective: to be able to create a network topology including Q3. 7.4 Operation All rights reserved © 2006.Page 3 . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 . Alcatel All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.] Graphical Interfaces .4 Operation All rights reserved © 2006.Objectives [cont.Network Topology 2-2-4 Alcatel 1353NM Alcatel 1353NM rel.Module 2 .Page 4 .00 Section 2 . Alcatel This page is left blank intentionally All rights reserved © 2006. 7. 1 1850TSS NE in PTRP Configuration 2.2 1850TSS NE in MSPP Configuration 2.Table of Contents Graphical Interfaces .Network Topology 2-2-5 Switch to notes view! 1 Creating a map 2 Managing and addressing a NE on a map 2.5 NE Autodiscovery 2.4 Operation All rights reserved © 2006.3. Alcatel All rights reserved © 2006.2 Creating and Addressing ISA boards 2.3 Creating and Addressing a 1850TSS NE 2.00 Section 2 .3.1 Creating and Addressing a Q3 NE 2.6 Map Population 3 Creating a Graphical Connection 4 Creating the GNE List 5 Addressing the NEs with IP Tunnel: OSI over IP 6 Distributing Maps Page 7 19 21 35 55 59 71 103 105 111 127 139 145 151 161 Alcatel 1353NM Alcatel 1353NM rel.Module 2 .3.4 Creating and Addressing a SNMP NE 2.Page 5 . 7.3 1850TSS NE in Full Data Configuration 2. Alcatel 3FL41020ACAAWBZZA Edition 1. 7.4 Operation All rights reserved © 2006.Table of Contents [cont.] Graphical Interfaces .Module 2 .00 Section 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.Page 6 . Alcatel All rights reserved © 2006.Network Topology 2-2-6 Switch to notes view! Page Alcatel 1353NM Alcatel 1353NM rel. Alcatel All rights reserved © 2006.Graphical Interfaces . 7.Page 7 .Module 2 .00 Section 2 .4 Operation All rights reserved © 2006.Network Topology 2-2-7 1 Creating a map Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1. 4 Operation All rights reserved © 2006.Network Topology 2-2-8 A map or a network topology view represents a set of sites. NEs. Alcatel 3FL41020ACAAWBZZA Edition 1.Page 8 . NEs and connections between symbols.g.00 Section 2 . but there is only one description of the object in the OS database.g. connections between these different entities managed symbols: supervised entities managed by the OS (e. 7.Module 2 . All rights reserved © 2006. Sites and connections between symbols) There may be multiple representations (symbols) in a map for a given managed object. Alcatel MAP: collection of symbols interconnected to represent a network SUBMAP: collection of related symbols displayed in a single graphical window submaps are organised in a hierarchical way each submap may contain symbols representing other submaps OBJECTS: Sites.1 Creating a map Reminder: map definition Graphical Interfaces . Object Root submap Open by clicking on the object Child submap related to a parent object Map Submap SM1 NE Submap SM2 Submap SM11 NE NE Submap SM12 NE NE Browser Alcatel 1353NM Alcatel 1353NM rel. NEs) graphical symbols: entities not supervised by the OS (e. Log in as an operator having relevant rights 2. Nevertheless.00 Section 2 .Module 2 . customise it (see next page). from this step. 7. Start 1353NM application. Access to TMN-OSs Management window 3.4 Operation All rights reserved © 2006. selecting Actions Topology Manager or click on the icon Alcatel 1353NM Alcatel 1353NM rel.Page 9 . the operator can create.1 Creating a map Creating an empty map Graphical Interfaces . Alcatel 3FL41020ACAAWBZZA Edition 1. All rights reserved © 2006. one more new map and then. Alcatel The operator can customise this new map automatically created.Network Topology 2-2-9 1. manually. 7.2 .Page 10 .00 Section 2 .10 New Map Click here to see the (sub)map hierarchy Alcatel 1353NM Alcatel 1353NM rel.Network Topology 2 .4 Operation All rights reserved © 2006.Module 2 . Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006.] Graphical Interfaces .1 Creating a map Creating an empty map [cont. Alcatel 3FL41020ACAAWBZZA Edition 1. selecting Edit 3.4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006. containing only a “Root” submap.Network Topology 2 . 7.Module 2 .1 Creating a map Creating a new map Graphical Interfaces .Page 11 .00 Section 2 . From the current map. 2. appears.2 . select File New map A new map. Authorise a free “layout”.11 1. Disable “Frozen Mode” if necessary : Layout Network Frozen Mode Alcatel 1353NM Alcatel 1353NM rel. Module 2 .1 Creating a map Customizing a Map Graphical Interfaces .Page 12 . “Cartesian” 3.12 The root submap can be customised as follow: 1. Select the menu View View Parameters 2.2 .4 Operation All rights reserved © 2006. 7. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006.g.00 Section 2 . Define the following parameters: Name : unique and without spaces Background : from the list Layout : e. Click OK and the update of the related window appears: Alcatel 1353NM Alcatel 1353NM rel.Network Topology 2 . select the menu Edit Create Child View 2. an empty Child view appears All rights reserved © 2006. Select a symbol 4. 5. a new symbol appears 1. 7.13 To add a child view.00 Section 2 . Define a Name : unique name without spaces 3.4 Operation All rights reserved © 2006.1 Creating a map Creating a submap : by “Child View” Graphical Interfaces . Alcatel 3FL41020ACAAWBZZA Edition 1. Double click on the new symbol.Network Topology 2 . Alcatel Alcatel 1353NM Alcatel 1353NM rel.Module 2 .2 . Click Apply .Page 13 . 5.Network Topology 2 . Alcatel Alcatel 1353NM Alcatel 1353NM rel. Double click on the symbol to attach a Child view and answer OK All rights reserved © 2006.2 . 7.00 Section 2 .1 Creating a map Creating a submap : by “Add Symbol” Graphical Interfaces .Module 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.Page 14 . select the menu Edit Add Symbol 2. the new symbol appears 1.14 To add a symbol. Select a Type (no graphical view) 3.4 Operation All rights reserved © 2006. Click Apply . Define a User label : unique name without spaces 4. Module 2 . Click OK and the created submap appears Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006.Network Topology 2 .15 1. Alcatel All rights reserved © 2006.00 Section 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.1 Creating a map Creating a submap : by “Add Symbol” [cont. Define the following parameters using View Background : from the list Layout : e.] Graphical Interfaces . “Cartesian” View Parameters : 2.g.Page 15 . 7.2 . 00 Section 2 .(unique name without spaces) Save Alcatel 1353NM Alcatel 1353NM rel.1 Creating a map Saving a map Graphical Interfaces .Page 16 . Alcatel 3FL41020ACAAWBZZA Edition 1. Click File Local Persistency Save Map as Define a File Name : --.Network Topology 2 .Module 2 .16 1.4 Operation All rights reserved © 2006. 7. Select the menu 2. Alcatel All rights reserved © 2006.2 . Page 17 .00 Section 2 . Click File Local Persistency Restore Map Select a File then the File Name field is updated Restore Alcatel 1353NM Alcatel 1353NM rel.1 Creating a map Restoring a map Graphical Interfaces .17 1.4 Operation All rights reserved © 2006. 7. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006. Select the menu 2.Network Topology 2 .2 .Module 2 . close it and open it Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.18 Create a new map (each group should use a different name) Create a child submap Save the created map. Alcatel All rights reserved © 2006.2 .Page 18 .1 Creating a map Exercise Graphical Interfaces .00 Section 2 .Network Topology 2 . 7.4 Operation All rights reserved © 2006.Module 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 .Network Topology 2 .19 2 Managing and addressing a NE on a map Alcatel 1353NM Alcatel 1353NM rel.Page 19 . Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006.Graphical Interfaces .Module 2 .2 . 7. Blank Page Graphical Interfaces .Network Topology 2-2- 20 Alcatel 1353NM Alcatel 1353NM rel. 7. Alcatel 3FL41020ACAAWBZZA Edition 1.Module 2 .Page 20 .4 Operation All rights reserved © 2006. Alcatel This page is left blank intentionally All rights reserved © 2006.00 Section 2 . Alcatel 3FL41020ACAAWBZZA Edition 1. 7.1 Creating and Addressing a Q3 NE Alcatel 1353NM Alcatel 1353NM rel.2 .21 2.Module 2 .Graphical Interfaces . Alcatel All rights reserved © 2006.Page 21 .Network Topology 2 .00 Section 2 .4 Operation All rights reserved © 2006. 2 . 7.g.2.Page 22 .Module 2 .1 Creating and Addressing a Q3 NE Prerequisites Graphical Interfaces .4 Operation All rights reserved © 2006.00 Section 2 . Alcatel 3FL41020ACAAWBZZA Edition 1. lan0) A Necom_SubSystem associated to this Supervision_Area A EMLIMADMQ3 associated to the same Supervision_Area Check the correct configuration and process status with the System Administrator Alcatel 1353NM Alcatel 1353NM rel. Alcatel All rights reserved © 2006.Network Topology 2 .22 A Q3 NE can be created and correctly supervised only if the following processes have been configured and are running on the 1353NM System: A Supervision_Area linked to the System Ethernet interface (e. the system takes into account the load of each available EML-IM among the “EMLIMADMQ3” ones trying to make it homogeneous. Alcatel 1353NM Alcatel 1353NM rel. Choose Declarations Create NE 3. Manage the related addresses (NE & OS).Network Topology 2 . Open the related submap 2. Close the window or create more NEs 6.00 Section 2 . In this case.2.23 1. Click Apply to launch the creation The created NE appears on the submap 5. Fill in the NE Creation window Select the appropriate: NE family Type of equipment Release of equipment Fill in the two mandatory fields : User label Location Name 4.4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. All rights reserved © 2006. See next pages. 7.Module 2 .2 .1 Creating and Addressing a Q3 NE NE Creation Graphical Interfaces .Page 23 . Alcatel The above procedure leads to an automatic choice of the Supervision Area and EML-IM made by the 1353NM system. the fields “Supervision Area” and “EML Domain “ have to be used.Network Topology 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 2 . To do that. Identify the processes which can be in charge of the NE to be created.1 Creating and Addressing a Q3 NE EMLIM and Supervision Area assignement Graphical Interfaces . To display the list of the existing EML-IMs. open the Process Monitoring window as follow: From TMN-OSs Management window.24 The NE creation form gives the operator the opportunity to select himself a particular EML-IM. The “Process Monitoring” analysis of the system can be helpful to make such a choice.2 . select 1353NM icon then click on the Process Monitoring Icon In the Process Monitoring window . Alcatel All rights reserved © 2006.2. expand the tree structure up to the Retix stack and the EML-IM list. Supervision Area (primary) The Retix stack sub processes suffix suggest the Supervision EML domain (100 or 101) Area EML domain must be chosen among the “EMLIMADMQ3” ones Alcatel 1353NM Alcatel 1353NM rel. 7.00 Section 2 .Page 24 .4 Operation All rights reserved © 2006. e.00 Section 2 . for example. at http://www.4 Operation All rights reserved © 2006.Page 25 . Alcatel NSAP: Network Service Access Point IDP Initial Domain Part AFI Authority and Format Identifier • 39 • 47 ==> IDI is an ISO DCC (Data Country Code) (ANSI format) ==> IDI is an ISO6523 ICD (GOSIP format) IDI Initial Domain Identifier • example in ISO DCC format 032F Argentina 710F RSA DSP Domain Specific Part DFI DSP Format Identifier ORG Organisation Name (numeric form) RSD Reserved RD ID Routing Domain Identifier System Identifier (useful for using the MAC address as the ID field.NSAP address Graphical Interfaces .Module 2 .org/rfcs/rfc1600 250F France 826F UK 372F Ireland 840F USA 380F Italy All rights reserved © 2006. it must be unique for the specified equipment) The NSAP address is made of two parts : IDP : defining the address structure DSP : the address itself NSAP IDP AFI 1 byte DSP IDI DFI 1 byte ORG 3 bytes RSD 2 bytes RD 2 bytes Area 2 bytes ID 6 bytes SEL 1 byte 2 bytes xx xxxx xx xxxxxx 0000 xxxx xxxx xxxxxxxxxxxx 1D Alcatel 1353NM Alcatel 1353NM rel.1 Creating and Addressing a Q3 NE System addressing . 7.2.25 An NSAP address represents globally a unique location in the OSI environment (i.2 .alternic. but this is not mandatory) Area Area Identifier SEL NSAP Selector for further information on NSAP refer to RFC1629. Alcatel 3FL41020ACAAWBZZA Edition 1.Network Topology 2 . Page 26 .1 Creating and Addressing a Q3 NE System addressing .26 D1 Area D2 A1 A3 NE System ID A2 Domain A4 Alcatel 1353NM Alcatel 1353NM rel.00 Section 2 .2.NSAP address Graphical Interfaces .Module 2 .2 . Alcatel 3FL41020ACAAWBZZA Edition 1. 7.Network Topology 2 .4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006. 4 Operation All rights reserved © 2006.1 Creating and Addressing a Q3 NE System addressing . Alcatel 1353NM Alcatel 1353NM rel.NSAP address Graphical Interfaces . All rights reserved © 2006.00 Section 2 .2 . Alcatel Each Alcatel equipment runs as an Intermediate System (IS) equipment and uses the IS-IS protocol. 7.2. without routing table ES IS Two protocols: ES-IS between an ES equipment and an IS equipment IS-IS between two IS equipment.Module 2 . with routing table End Systems (ES).Page 27 .27 Two types of equipment: Intermediate Systems (IS). Alcatel 3FL41020ACAAWBZZA Edition 1.Network Topology 2 . 2.e. non-pure L2 for routing tables Graphical Interfaces .Network Topology 2 .28 Level L1 Knowledge of the topology of the area in which the NE is located.Module 2 . knowledge of all the NEs which make the inter-area routing in a given domain). Alcatel 3FL41020ACAAWBZZA Edition 1. L2.4 Operation All rights reserved © 2006. Level L2 Knowledge of the topology of all L2 routers in the domain (i. Alcatel All rights reserved © 2006. (Nonpure L2 = L2 + L1 ) Alcatel 1353NM Alcatel 1353NM rel. L1 L2 Non pure Level non-pure L2 Knowledge of the topology of the area and of all level L2 routers in the domain.1 Creating and Addressing a Q3 NE Level L1.2 . 7.Page 28 .00 Section 2 . get or configure the NE address from the Equipment View (NE): Select menu Configuration Comm/Routing Local Configuration If already configured the following addresses are shown: Presentation: Session: Transport: 0002 00 00 If necessary. click ”Cancel” Alcatel 1353NM Alcatel 1353NM rel. By the CT.Page 29 . 7.Module 2 . Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel To open the Equipment view from 1320CT: Select the supervised NE into the map Supervision NE Login All rights reserved © 2006.Network Topology 2 .00 Section 2 .1 Creating and Addressing a Q3 NE NE addressing Graphical Interfaces .29 1.4 Operation All rights reserved © 2006.2 .2. configure or modify and click "OK” If no modification is done. 00 Section 2 .30 2.4 Operation All rights reserved © 2006.] Graphical Interfaces . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 2 .Page 30 .2 . Alcatel All rights reserved © 2006. configure the OS address on the NE from the Equipment View (NE): Select menu Configuration Comm/Routing OS Configuration Enter the main (and the spare if any) OS NSAP addresses: Click “OK“ Alcatel 1353NM Alcatel 1353NM rel.Network Topology 2 . By the CT. 7.2.1 Creating and Addressing a Q3 NE NE addressing [cont. Module 2 .1 Creating and Addressing a Q3 NE NE addressing [cont.4 Operation All rights reserved © 2006.2.31 3. verify or set the LAPD configurations from the Equipment View (NE): Select menu Configuration Comm/Routing Interfaces Configuration LAPD Configuration For each SDH port between the GNE and any other NE to reach. 7. Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 .] Graphical Interfaces . By the CT.Page 31 .Network Topology 2 .2 . make sure the LAPD interfaces are created and configured : “Network” / “User” Click “Apply” to confirm any modification then ”Close“ Alcatel 1353NM Alcatel 1353NM rel. Alcatel All rights reserved © 2006. ] Graphical Interfaces . Alcatel For the gateway NE it is necessary to enable the Ethernet interface All rights reserved © 2006.32 4.4 Operation All rights reserved © 2006.2 .Page 32 . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 .Network Topology 2 . enable the Ethernet configuration if necessary from the Equipment View (NE): Select menu Configuration Comm/Routing Interfaces Configuration Ethernet Configuration Click on yes to enable it Click “Apply” to confirm any modification then ”Close“ Alcatel 1353NM Alcatel 1353NM rel.1 Creating and Addressing a Q3 NE NE addressing [cont. By the CT. 7.Module 2 .2. it can still be displayed.Page 33 . However. All rights reserved © 2006.Network Topology 2 .1 Creating and Addressing a Q3 NE NE addressing [cont.2 . Alcatel 3FL41020ACAAWBZZA Edition 1.] Graphical Interfaces . 7.e.00 Section 2 . Alcatel The NE address can be modified only if the NE is not supervised (i.33 Configure the address of the NE on the 1353NM Select the NE to be addressed Select the menu Declarations Set Addresses Presentation: Session: Transport: NE Address 0002 00 00 Enter the values for the selectors Enter the NSAP address (as for Local Configuration) Click Apply then close Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006.2.Module 2 . in the "declared" state). Blank Page Graphical Interfaces . Alcatel 3FL41020ACAAWBZZA Edition 1. 7.Network Topology 2-2- 34 Alcatel 1353NM Alcatel 1353NM rel.Page 34 .00 Section 2 .Module 2 .4 Operation All rights reserved © 2006. Alcatel This page is left blank intentionally All rights reserved © 2006. 7.2 Creating and Addressing ISA boards Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.2 . Alcatel All rights reserved © 2006.Page 35 .Module 2 .4 Operation All rights reserved © 2006.35 2.Network Topology 2 .00 Section 2 .Graphical Interfaces . Page 36 .2. Each of them will be considered by the 1353NM as a “Sub NE” while the related OMSN will be considered as a “Host NE”.00 Section 2 . The communication towards the 1353NM is via SNMP protocol.36 ISA boards are inserted into the OMSN shelves.Module 2 . Alcatel All rights reserved © 2006.2 . 1353NM SNMP EMLIM Q3 EMLIM DCN DCN ISA Board Alcatel 1353NM Alcatel 1353NM rel.2 Creating and Addressing ISA boards ISA boards and 1353NM interworking Graphical Interfaces . 7.4 Operation OMSN Equipment Controller All rights reserved © 2006. Therefore their creation and addresses will have to be managed.Network Topology 2 . See next pages. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel 3FL41020ACAAWBZZA Edition 1.Network Topology 2 .4 Operation All rights reserved © 2006.Page 37 .2 Creating and Addressing ISA boards Creating an ISA board Graphical Interfaces . Alcatel All rights reserved © 2006.Module 2 . From Equipment view of the Host NE.2.37 1. insert the ISA configuration: board in the NE Select the unit and the slot in which the ISA board has to be inserted Choose the menu Equipment Set Choose the desired board and click on Ok Alcatel 1353NM Alcatel 1353NM rel.2 . 7.00 Section 2 . 2. 7. Alcatel When the “Host NE” is not yet supervised.2 Creating and Addressing ISA boards Creating an ISA board [cont. step 2) can be performed using the craft terminal 1320CT ISA board IP address can be managed also using the options: Equipment ISA board IP Address All rights reserved © 2006.00 Section 2 .2 . Alcatel 3FL41020ACAAWBZZA Edition 1.Page 38 .38 2.] Graphical Interfaces .Module 2 . From Equipment view of the Host NE get or set the IP address of the ISA board: Choose the menu Configuration Comm/Routing Configuration IP address IP ISA board select the required board If necessary set the IP address and Apply Click Close Alcatel 1353NM Alcatel 1353NM rel.Network Topology 2 .4 Operation All rights reserved © 2006. : Click Quit only after the ISA board just configured appears in the bottom part of the screen All rights reserved © 2006.4 Operation All rights reserved © 2006. Board type.] Graphical Interfaces .2. only if “Advanced” is selected) EML domain 6. IP address and (optionally. Release type.Network Topology 2 .Module 2 . Click Apply then Quit (*) Clicking on “Add on Tunnel”. 7. Alcatel 3FL41020ACAAWBZZA Edition 1. Fill in the window : « Create ISA» Family type.39 3. it provides the operator the opportunity to : Assign a particular EML IM Set a particular NE ID (*) N. Alcatel The use of « Advanced » configuration is not mandatory. Instead of automatic choices made by the 1353NM. Label (slot). Open the submap in which the Host NE (OMSN) is located and select it 4.2 .00 Section 2 .2 Creating and Addressing ISA boards Creating an ISA board [cont.Page 39 .B. an IP over OSI tunnel is automatically configured (see next slides for explanations) Alcatel 1353NM Alcatel 1353NM rel. Choose the menu Declarations Create ISA 5. 4 Operation All rights reserved © 2006. further on in this Module) and can be managed into the submap as one of any other NE. Alcatel 3FL41020ACAAWBZZA Edition 1.Page 40 .2 Creating and Addressing ISA boards Creating an ISA board [cont.2. the ISA board icon must be populated into the wanted map (see “MAP Population” chapter. Alcatel All rights reserved © 2006.00 Section 2 . 7.Network Topology 2 .Module 2 . ISA board OMSN The ISA board as a “Sub NE” can be removed as standard NE using Declarations option.] Graphical Interfaces .2 .40 After the creation. Delete Generic Alcatel 1353NM Alcatel 1353NM rel. the user can configure and activate the IP over OSI tunnels on the 1353NM.Module 2 .00 Section 2 . Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel IP over OSI tunneling is a technique that consists in the insertion (encapsulation) of the IP packets in OSI traffic.2. into the OMSN. working on the IP tunnel list. 7. The Tunnel driver encapsulates the IP packets into OSI and forwards the packets to the tunnel engine All rights reserved © 2006. Starting from 1353NM.Network Topology 2 . SNMP messages carrying the IP address of the target ISA board are encapsulated in OSI packets and then sent through the OSI tunnel to the OMSN hosting the target ISA board. the IP packets are routed to the proper local ISA board. The OSI tunnel is terminated.4 Operation All rights reserved © 2006.2 Creating and Addressing ISA boards ISA boards and communication stacks concept Graphical Interfaces .41 OSI DCN Alcatel 1353NM Alcatel 1353NM rel.Page 41 . by the “Point to Point” IP address belonging to its Equipment Controller. The tunnels are then managed by the system by means of the “IP Tunnel Engine”. By means of the “IP Tunnel Provisioning GUI”.2 . From here. Module 2 . Alcatel All rights reserved © 2006. no router reconfiguration) Supporting SNMP traffic to/from ISA Boards with a single e2e tunnel Fully exploitation of OSI DCN resilience Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.Network Topology 2 .2 Creating and Addressing ISA boards Communication between 1353NM and ISA boards Graphical Interfaces .42 The IP-over-OSI feature at 1353NM level aims at: Keeping OSI DCN backbones (no OPSFv2 introduction.00 Section 2 .2.2 . 7.Page 42 . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 2 .00 Section 2 . Check with the system administrator.2. The same ositunneling process instance can support more than one tunnels towards different NEs. processes have been instantiated in the NM Configure the IP Point-to-Point interface into the OMSN hosting the ISA board Configure the IP over OSI tunnel into the OMSN Configure the IP Static Routing Configuration into the OMSN Create the IP over OSI Tunnel into the 1353NM Eventually.Network Topology 2 . It means that with a single ositunneling process. 4. 3.4 Operation All rights reserved © 2006. 6. add other ISA board to the created IP over OSI tunnel Alcatel 1353NM Alcatel 1353NM rel. 5.43 The following procedure must be applied for managing a configured ISA board in 1353NM 1.2 Creating and Addressing ISA boards IP over OSI tunnel setting up procedure Graphical Interfaces .Page 43 . different ISA boards located in different OMSN can be supervised.2 . the “ositunneling” and the “OSI_Manager” 2. All rights reserved © 2006. Check that a “EMLIMCORBASNMP”. Alcatel The ositunneling process and the EML IM (EMLIMCORBASNMP_xxx) linked to the ISA board must be associated to a “virtual” supervision area. 7. Click on 2.44 1. “ositunneling” and Osi_Manager” processes are running. EMLIMCORBANSNMP process must be associated to an OSI tunnel Alcatel 1353NM Alcatel 1353NM rel.2 Creating and Addressing ISA boards Step 1 Graphical Interfaces . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 .4 Operation All rights reserved © 2006. ask to the System Administrator for their instantiation All rights reserved © 2006.2 .Module 2 . Alcatel If the required processes are not running.Network Topology 2 .Page 44 . Check that a “EMLIMCORBANSNMP”.2. 7. Network Topology 2 .2.2 .00 Section 2 . 7. Alcatel 3FL41020ACAAWBZZA Edition 1.45 1. From the OMSN Equipment View. click on 2. Alcatel All rights reserved © 2006. Insert the IP Address of the IP Point-to-Point interface Alcatel 1353NM Alcatel 1353NM rel.Page 45 .2 Creating and Addressing ISA boards Step 2 Graphical Interfaces .Module 2 .4 Operation All rights reserved © 2006. click on 2.2.Network Topology 2 .Module 2 . 7. IP Routing = “None” Alcatel 1353NM Alcatel 1353NM rel.2 Creating and Addressing ISA boards Step 3 Graphical Interfaces .4 Operation All rights reserved © 2006. Insert the NSAP (OSI) Address of the 1353NM 3.46 1.00 Section 2 . From the OMSN Equipment View.Page 46 . Alcatel 3FL41020ACAAWBZZA Edition 1.2 . Alcatel All rights reserved © 2006. Alcatel All rights reserved © 2006. Insert the IP Address of the tunnel defined in the 1353NM system configuration (ask the System Administrator) 3.00 Section 2 .Network Topology 2 . 7. From the OMSN Equipment View.Page 47 . Alcatel 3FL41020ACAAWBZZA Edition 1.47 1. Select “CLNP Tunnel” Alcatel 1353NM Alcatel 1353NM rel.2 .2 Creating and Addressing ISA boards Step 4 Graphical Interfaces .Module 2 . click on 2.4 Operation All rights reserved © 2006.2. 2.2 Creating and Addressing ISA boards Step 5 Graphical Interfaces - Network Topology 2 - 2 - 48 1. From the TMN-OS Management, issue “1353NM Admin” 2. Click on “NE Administration” and then on “IP over Osi Tunneling” Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel As shown at page 57, the IP over OSI Tunnel can be automatically configured by the System during the ISA board declaration. All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 48 2.2 Creating and Addressing ISA boards Step 5 [cont.] Graphical Interfaces - Network Topology 2 - 2 - 49 4. Select the desired NE. Set Tunnel Type = ALCATEL and then Confirm 3. Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 49 2.2 Creating and Addressing ISA boards Step 6 Graphical Interfaces - Network Topology 2 - 2 - 50 5. Eventually Add the NE IP (ISA Boards) on Tunnel: Now the user can start supervision on the added ISA Board Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel The tool automatically add the already declared NE IP to the tunnel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 50 2.2 Creating and Addressing ISA boards Tunnel details Graphical Interfaces - Network Topology 2 - 2 - 51 Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel The command “netstat –r”, issued by a unix shell, shows the configured tunnel in the routing table (virtual is the hostname of the ositunnel, set by the system administrator by updating the /etc/host file): All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 51 2.2 Creating and Addressing ISA boards Removing Tunnels Graphical Interfaces - Network Topology 2 - 2 - 52 Before removing the tunnel, all the NE IP on tunnel must be removed 1. Click on Remove (NE IP on tunnel) 2. Click on “Check in to remove this IP NE” Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 52 2.2 Creating and Addressing ISA boards Removing Tunnels [cont.] Graphical Interfaces - Network Topology 2 - 2 - 53 3. Remove the Tunnel Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel The tool automatically add the already declared NE IP to the tunnel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 53 Blank Page Graphical Interfaces - Network Topology 2-2- 54 Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel This page is left blank intentionally All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 54 Graphical Interfaces - Network Topology 2 - 2 - 55 2.3 Creating and Addressing a 1850TSS NE Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 55 2.3 Creating and Addressing a 1850TSS NE Generalities Graphical Interfaces - Network Topology 2 - 2 - 56 The Alcatel 1850 Transport Service Switch (TSS) (a.k.a. 4G NE) is a multi-service transport platform able to support any mix of traffic from 100% TDM to 100% data. This is achieved by a technology independent (universal) switch that is capable of switching packets or circuits in their native format and transport them as they are. The Alcatel 1850 TSS platform comes in five sizes, according to different transport switching capacities: 1850 TSS-15, TSS-40, TSS-100, TSS-320 and TSS-640. In NR 8.1 (1353NM Rel7.4) only TSS-40 and TSS-320 are supported. 1850 TSS-40 is seen by the network management as a pure SNMP NE, so please refer to the chapter dedicated to the SNMP NE creation and addressing further on in this chapter 1850 TSS-320 is an integrated TDM/Data platform that can be configured as: Pure TRansport Platform (PTRP), providing pure TDM and WDM transport capability Multi-Service Provisioning Platform (MSPP), providing the capability of integrated transport of TDM and data traffic. Carrier Ethernet Transport Platform (CETP), or Full Data, providing data traffic transport capability. Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 56 2.3 Creating and Addressing a 1850TSS NE Management of 1850 TSS-320 Graphical Interfaces - Network Topology 2 - 2 - 57 The 1850 TSS-320 in PTRP configuration hosts only a Q3 management agent. The 1850 TSS-320 in MSPP configuration hosts both the Q3 and the SNMP management agents The Q3 agent is dedicated to the equipment control and to the TDM transmission management The SNMP agent is dedicated to the data transmission management The 1850 TSS-320 in Full data configuration hosts only the SNMP agent TSS-320 PTRP Q3 Agent TSS-320 MSPP Q3 Agent SNMP Agent TSS-320 Full Data SNMP Agent Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 57 Alcatel Alcatel 1353NM Alcatel 1353NM rel.2.Module 2 .00 Section 2 .2 .4 Operation All rights reserved © 2006.Network Topology 2 . 4G EMLIM EML Coordinator Q3 Protocol adapter Q3 SNMP Protocol adapter SNMP TSS-320 MSPP Q3 Agent SNMP Agent Example of a TSS-320 in MSPP configuration All rights reserved © 2006. the 1850 TSS320 NE is managed as a single NE by the 1353NM A single NE is represented on the MAP The protocols and models used to interface the NE (Q3 and/or SNMP) are correlated by a EML coordinator process Based on the NE configuration.58 Regardless if the agents hosted are one or two (Q3 or/and SNMP). 7.] Graphical Interfaces .Page 58 . Alcatel 3FL41020ACAAWBZZA Edition 1.3 Creating and Addressing a 1850TSS NE Management of 1850 TSS-320 [cont. one or two communication sessions are established between the 1353NM and the NE: a Q3 session or/and a SNMP session. Alcatel 3FL41020ACAAWBZZA Edition 1.Network Topology 2 .00 Section 2 .3.1 1850TSS NE in PTRP Configuration Alcatel 1353NM Alcatel 1353NM rel.Page 59 .2 .4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006.59 2.Module 2 . 7.Graphical Interfaces . a Q3 DCN is needed in order to manage the equipment. Therefore.g.1 1850TSS NE in PTRP Configuration Creating a 1850TSS NE in PTRP Configuration Graphical Interfaces . 7.2 . only the Q3 communication session needs to be established between the 1353NM and the 1850TSS NE.00 Section 2 . All rights reserved © 2006. through the 4G EMLIM.3. It can be created and correctly supervised only if the following processes have been configured and are running on the 1353NM System: A Supervision_Area linked to the System Ethernet interface (e.2. Alcatel In this configuration. lan0) A Necom_SubSystem associated to this Supervision_Area A EMLIM4G associated to the same Supervision_Area Check the correct configuration and process status with the System Administrator 4G EMLIM EML Coordinator Q3 Protocol adapter Q3 TSS-320 PTRP Q3 Agent SNMP Protocol adapter Alcatel 1353NM Alcatel 1353NM rel.Page 60 .Network Topology 2 .Module 2 . by means of the only Q3 communication session.60 A 1850TSS MSPP NE in PTRP configuration is managed by the 1353NM. Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006. 2 . 6. Check the correct configuration and process status with the System 2.61 The following procedure must be applied for managing a 1850TSS MSPP NE in PTRP configuration in the 1353NM 1.2 1850TSS NE in MSPP Configuration Creation Procedure Graphical Interfaces .Page 61 .Module 2 . Alcatel All rights reserved © 2006.Network Topology 2 .2. Administrator (see previous page) Create the 1850TSS NE Check/Configure the OSI Local Address of the NE by the CT Check/Configure the OS Address in the NE by the CT Check/Configure the LAPD and the Ethernet interface in the NE by the CT Configure the NE address in the 1353NM Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1. 5. 4.4 Operation All rights reserved © 2006. 3.3. 7.00 Section 2 . Click on Primary Supervision Area linked to a Necom OSI stack EMLIM4G Alcatel 1353NM Alcatel 1353NM rel.2 .2 1850TSS NE in MSPP Configuration Creation Procedure: Step 1 Graphical Interfaces .62 1.4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel If the required processes are not running.Page 62 . ask to the System Administrator for their instantiation All rights reserved © 2006.Network Topology 2 .2.Module 2 . 7.00 Section 2 .3. Open the related submap 2.Module 2 . In this case.63 1.4 Operation All rights reserved © 2006. Alcatel The above procedure leads to an automatic choice of the Supervision Area and EML-IM made by the 1353NM system.1 1850TSS NE in PTRP Configuration Creation Procedure: Step 2 Graphical Interfaces . All rights reserved © 2006.3. Fill in the NE Creation window Select the appropriate: NE family: TransportServiceSwitch Type of equipment: 1850TSS-320 Release of equipment Fill in the two mandatory fields : User label Location Name 4.2.2 . the system takes into account the load of each available EML-IM among the “EMLIM4G” ones trying to make it homogeneous.00 Section 2 . Close the window or create more NEs Alcatel 1353NM Alcatel 1353NM rel. 7. Alcatel 3FL41020ACAAWBZZA Edition 1.Page 63 .Network Topology 2 . Click Apply to launch the creation The created NE appears on the submap 5. Choose Declarations Create NE 3. To display the list of the existing EML-IMs.4 Operation All rights reserved © 2006.Page 64 .Module 2 . select 1353NM icon then click on In the Process Monitoring window .2. the fields “Supervision Area” and “EML Domain “ have to be used.00 Section 2 .64 The NE creation form gives the operator the opportunity to select himself a particular EML-IM.1 1850TSS NE in PTRP Configuration Creation Procedure: Step 2 [cont.] Graphical Interfaces . Alcatel All rights reserved © 2006. The “Process Monitoring” analysis of the system can be helpful to make such a choice.3. Alcatel 3FL41020ACAAWBZZA Edition 1. To do that. Identify the processes which can be in charge of the NE to be created. 7. The Retix stack sub processes suffix suggest the Supervision Area EML domain must be chosen among the “EMLIM4G” Supervision Area (primary) EML domain (103) Alcatel 1353NM Alcatel 1353NM rel.Network Topology 2 . open the Process Monitoring window as follow: From TMN-OSs Management window.2 . expand the tree structure up to the Retix stack and the EML-IM list. Alcatel 3FL41020ACAAWBZZA Edition 1.2.3.65 By the CT. click ”Cancel” Alcatel 1353NM Alcatel 1353NM rel.Module 2 .Page 65 .1 1850TSS NE in PTRP Configuration Creation Procedure: Step 3 Graphical Interfaces . Alcatel To open the Equipment view from 1320CT: Select the supervised NE into the map Supervision NE Login All rights reserved © 2006. configure or modify and click "OK” If no modification is done.4 Operation All rights reserved © 2006.Network Topology 2 .00 Section 2 .2 . 7. get or configure the NE address from the Equipment View (NE): Select menu Configuration Comm/Routing Local Configuration OSI Configuration If already configured the following addresses are shown: Presentation: Session: Transport: 00 0002 00 If necessary. Module 2 . 7.3.Network Topology 2 . Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006.1 1850TSS NE in PTRP Configuration Creation Procedure: Step 4 Graphical Interfaces .2 .Page 66 . configure the OS address on the NE from the Equipment View (NE): Select menu Configuration Comm/Routing OS Configuration Enter the main (and the spare if any) OS NSAP addresses: Click “OK“ Alcatel 1353NM Alcatel 1353NM rel.2.00 Section 2 .4 Operation All rights reserved © 2006.66 By the CT. verify or set the LAPD configurations from the Equipment View (NE): Select menu Configuration Comm/Routing Interfaces Configuration LAPD Configuration For each SDH port between the GNE and any other NE to reach.1 1850TSS NE in PTRP Configuration Creation Procedure: Step 5 Graphical Interfaces .Module 2 .67 By the CT.Page 67 .2 . 7. Alcatel All rights reserved © 2006.3.4 Operation All rights reserved © 2006.2.Network Topology 2 .00 Section 2 . make sure the LAPD interfaces are created and configured : “Network” / “User” Network Protocol = OSI Click “Apply” to confirm any modification then ”Close“ Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1. 2 .00 Section 2 .Page 68 .2.] Graphical Interfaces . enable the Ethernet configuration if necessary from the Equipment View (NE): Select menu Configuration Comm/Routing Interfaces Configuration Ethernet Configuration Click on yes to enable it Network Protocol = OSI Click “Apply” to confirm any modification then ”Close“ Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.3.1 1850TSS NE in PTRP Configuration Creation Procedure: Step 5 [cont. Alcatel For the gateway NE it is necessary to enable the Ethernet interface All rights reserved © 2006.Module 2 .68 By the CT. 7.Network Topology 2 .4 Operation All rights reserved © 2006. 00 Section 2 .2. 7. All rights reserved © 2006.e.Network Topology 2 . it can still be displayed.Module 2 .3.4 Operation All rights reserved © 2006.2 . Alcatel The NE address can be modified only if the NE is not supervised (i.1 1850TSS NE in PTRP Configuration Creation Procedure: Step 6 Graphical Interfaces .Page 69 .69 Configure the address of the NE on the 1353NM Select the NE to be addressed Select the menu Declarations Set Addresses Presentation: Session: Transport: NE Address 0002 00 00 Enter the values for the selectors Enter the NSAP address (as for Local Configuration) Leave blank the “IP Address” field Click Apply then close Alcatel 1353NM Alcatel 1353NM rel. However. in the "declared" state). Alcatel 3FL41020ACAAWBZZA Edition 1. 4 Operation All rights reserved © 2006. Alcatel This page is left blank intentionally All rights reserved © 2006.Page 70 .Blank Page Graphical Interfaces . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 2 . 7.00 Section 2 .Network Topology 2-2- 70 Alcatel 1353NM Alcatel 1353NM rel. Module 2 .Page 71 .Graphical Interfaces .2 1850TSS NE in MSPP Configuration Alcatel 1353NM Alcatel 1353NM rel.Network Topology 2 .2 .3.4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.71 2.00 Section 2 . Alcatel All rights reserved © 2006. 7. the DCN must support both the protocols. by means of both a Q3 and a SNMP communication session. through the 4G EMLIM.3. Alcatel In this configuration.2 1850TSS NE in MSPP Configuration Creating a 1850TSS NE in MSPP Configuration Graphical Interfaces . both the Q3 and the SNMP communication sessions need to be established between the 1353NM and the 1850TSS NE.00 Section 2 .4 Operation All rights reserved © 2006.2 . Alcatel 3FL41020ACAAWBZZA Edition 1.Page 72 . By a pure OSI DCN.Module 2 . The two sessions can be supported: By a OSI/IP DCN. This can be achieved in two ways: A DCN able to transport contemporarily both the Q3 and the SNMP traffic (OSI/IP DCN) A Q3 DCN over which an IP over OSI tunnel must be instantiated (OSI DCN) All rights reserved © 2006. Therefore. with the SNMP session flowing through an IP over OSI tunnel between the 1353NM and the Q3 interface of the 1850TSS NE 4G EMLIM EML Coordinator Q3 Protocol adapter Q3 SNMP Protocol adapter SNMP TSS-320 MSPP Q3 Agent SNMP Agent Alcatel 1353NM Alcatel 1353NM rel. with both the Q3 and the SNMP sessions running independently. 7.72 A 1850TSS MSPP NE in MSPP configuration is managed by the 1353NM.2.Network Topology 2 . 00 Section 2 .4 Operation Q3 Agent SNMP Agent All rights reserved © 2006. 4G EMLIM EML Coordinator Q3 Protocol adapter SNMP Protocol adapter TSS-320 MSPP OSI/IP DCN SNMP session (IP traffic) Q3 session (OSI traffic) Alcatel 1353NM Alcatel 1353NM rel. 7. Alcatel All rights reserved © 2006. both the OSI and the SNMP management session can contemporarily run over the same network infrastructure.3.73 When a OSI/IP DCN is available.2. Alcatel 3FL41020ACAAWBZZA Edition 1.2 1850TSS NE in MSPP Configuration Creating a 1850TSS NE in MSPP Configuration: OSI/IP DCN Graphical Interfaces .2 .Network Topology 2 .Page 73 .Module 2 . 2 .74 In this case. the 1850TSS NE can be created and correctly supervised only if the following processes have been configured and are running on the 1353NM System: A Supervision_Area linked to the System Ethernet interface (e. Alcatel 3FL41020ACAAWBZZA Edition 1.3.Module 2 .00 Section 2 .2 1850TSS NE in MSPP Configuration Creating a 1850TSS NE in MSPP Configuration: OSI/IP DCN [cont. 7. Alcatel All rights reserved © 2006.2. lan0) A Necom_SubSystem associated to this Supervision_Area A EMLIM4G associated to the same Supervision_Area Check the correct configuration and process status with the System Administrator Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006.Network Topology 2 .g.] Graphical Interfaces .Page 74 . 7.3. Alcatel All rights reserved © 2006. 7.2 . Administrator (see previous page) Create the 1850TSS NE Check/Configure the OSI Local Address of the NE by the CT Check/Configure the IP Local Address of the NE by the CT Check/Configure the OS Address in the NE by the CT Check/Configure the LAPD and the Ethernet interface in the NE by the CT Configure the NE address in the 1353NM Alcatel 1353NM Alcatel 1353NM rel.75 The following procedure must be applied 1. Alcatel 3FL41020ACAAWBZZA Edition 1. 6.00 Section 2 . 5. 4.Network Topology 2 .4 Operation All rights reserved © 2006.Module 2 .2. Check the correct configuration and process status with the System 2.Page 75 . 3.2 1850TSS NE in MSPP Configuration Creation Procedure: OSI/IP DCN Graphical Interfaces . 2 .00 Section 2 . Alcatel 3FL41020ACAAWBZZA Edition 1. 7.Network Topology 2 .Page 76 .4 Operation All rights reserved © 2006.Module 2 . ask to the System Administrator for their instantiation All rights reserved © 2006.76 1.3.2 1850TSS NE in MSPP Configuration Creation Procedure (OSI/IP DCN): Step 1 Graphical Interfaces . Click on Primary Supervision Area linked to a Necom OSI stack EMLIM4G Alcatel 1353NM Alcatel 1353NM rel.2. Alcatel If the required processes are not running. Close the window or create more NEs Alcatel 1353NM Alcatel 1353NM rel.2.4 Operation All rights reserved © 2006.00 Section 2 .Network Topology 2 .Module 2 .Page 77 . Choose Declarations Create NE 3.3. Alcatel The above procedure leads to an automatic choice of the Supervision Area and EML-IM made by the 1353NM system. 7. Click Apply to launch the creation The created NE appears on the submap 5. the system takes into account the load of each available EML-IM among the “EMLIM4G” ones trying to make it homogeneous.2 . In this case.2 1850TSS NE in MSPP Configuration Creation Procedure (OSI/IP DCN): Step 2 Graphical Interfaces . All rights reserved © 2006. Fill in the NE Creation window Select the appropriate: NE family: TransportServiceSwitch Type of equipment: 1850TSS-320 Release of equipment Fill in the two mandatory fields : User label Location Name 4.77 1. Alcatel 3FL41020ACAAWBZZA Edition 1. Open the related submap 2. To do that.2.Network Topology 2 . the fields “Supervision Area” and “EML Domain “ have to be used. Alcatel All rights reserved © 2006.Module 2 .Page 78 . 7.00 Section 2 .3. select 1353NM icon then click on In the Process Monitoring window . The “Process Monitoring” analysis of the system can be helpful to make such a choice. To display the list of the existing EML-IMs.2 1850TSS NE in MSPP Configuration Creation Procedure (OSI/IP DCN): Step 2 [cont. expand the tree structure up to the Retix stack and the EML-IM list.78 The NE creation form gives the operator the opportunity to select himself a particular EML-IM. open the Process Monitoring window as follow: From TMN-OSs Management window.] Graphical Interfaces . Alcatel 3FL41020ACAAWBZZA Edition 1. The Retix stack sub processes suffix suggest the Supervision Area EML domain must be chosen among the “EMLIM4G” Supervision Area (primary) EML domain (103) Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006. Identify the processes which can be in charge of the NE to be created.2 . Network Topology 2 .4 Operation All rights reserved © 2006. configure or modify and click "OK” If no modification is done. Alcatel 3FL41020ACAAWBZZA Edition 1.3.79 By the CT. 7.00 Section 2 .2. click ”Cancel” Alcatel 1353NM Alcatel 1353NM rel.2 1850TSS NE in MSPP Configuration Creation Procedure (OSI/IP DCN): Step 3 Graphical Interfaces . get or configure the NE address from the Equipment View (NE): Select menu Configuration Comm/Routing Local Configuration OSI Configuration If already configured the following addresses are shown: Presentation: Session: Transport: 00 0002 00 If necessary.2 .Page 79 .Module 2 . Alcatel All rights reserved © 2006. 2 . click ”Close” Alcatel 1353NM Alcatel 1353NM rel.Page 80 .80 By the CT. 7. Alcatel To open the Equipment view from 1320CT: Select the supervised NE into the map Supervision NE Login All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.Module 2 .Network Topology 2 .2 1850TSS NE in MSPP Configuration Creation Procedure (OSI/IP DCN): Step 4 Graphical Interfaces . get or configure the NE address from the Equipment View (NE): Select menu Configuration Comm/Routing Local Configuration IP Configuration Assign the IP Address and click “Apply” If no modification is done.2.3.00 Section 2 . Alcatel All rights reserved © 2006.2 1850TSS NE in MSPP Configuration Creation Procedure (OSI/IP DCN): Step 5 Graphical Interfaces .81 By the CT.2 . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 2 .4 Operation All rights reserved © 2006.3. configure the OS address on the NE from the Equipment View (NE): Select menu Configuration Comm/Routing OS Configuration Enter the main (and the spare if any) OS NSAP addresses: Click “OK“ Alcatel 1353NM Alcatel 1353NM rel.Page 81 .00 Section 2 . 7.2.Network Topology 2 . 2 1850TSS NE in MSPP Configuration Creation Procedure (OSI/IP DCN): Step 6 Graphical Interfaces . make sure the LAPD interfaces are created and configured : “Network” / “User” Network Protocol = IP and OSI Click “Apply” to confirm any modification then ”Close“ Alcatel 1353NM Alcatel 1353NM rel.2.00 Section 2 . 7.Module 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006. verify or set the LAPD configurations from the Equipment View (NE): Select menu Configuration Comm/Routing Interfaces Configuration LAPD Configuration For each SDH port between the GNE and any other NE to reach.82 By the CT.Page 82 .2 .Network Topology 2 . Alcatel All rights reserved © 2006.3. 2 1850TSS NE in MSPP Configuration Creation Procedure (OSI/IP DCN): Step 6 [cont.83 By the CT.Network Topology 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.Page 83 . Alcatel For the gateway NE it is necessary to enable the Ethernet interface All rights reserved © 2006.2.2 .3. enable the Ethernet configuration if necessary from the Equipment View (NE): Select menu Configuration Comm/Routing Interfaces Configuration Ethernet Configuration Click on yes to enable it Network Protocol = OSI and IP Configure an IP address and IP mask in the IP section IP Routing Protocol = ISIS Click “Apply” to confirm any modification then ”Close“ Alcatel 1353NM Alcatel 1353NM rel.00 Section 2 .Module 2 . 7.] Graphical Interfaces .4 Operation All rights reserved © 2006. 4 Operation All rights reserved © 2006. it can still be displayed. Alcatel 3FL41020ACAAWBZZA Edition 1.e.Y.84 Configure the address of the NE on the 1353NM Select the NE to be addressed Select the menu Declarations Set Addresses Presentation: Session: Transport: NE Address 0002 00 00 Enter the values for the selectors Enter the NSAP address (as for Local Configuration) Configure the “IP Address” field: X. In the declaration phase. it is enough to configure only one of the two addresses: OSI or IP. in the "declared" state).Z.3.2 .Page 84 .W:161 (the UDP Port is always 161) Click Apply then close Alcatel 1353NM Alcatel 1353NM rel. Alcatel The NE address can be modified only if the NE is not supervised (i.Module 2 .Network Topology 2 .00 Section 2 .2. 7. The remaining one will be automatically discovered when the supervision process is started All rights reserved © 2006. However.2 1850TSS NE in MSPP Configuration Creation Procedure (OSI/IP DCN): Step 7 Graphical Interfaces . Network Topology 2 .Module 2 .4 Operation TSS-320 MSPP Q3 Agent SNMP Agent All rights reserved © 2006.Page 85 .2 .2. the SNMP management session must run over an IP over OSI tunnel configured between the 1353NM and the 1850TSS NE. 1353NM 4G EMLIM EML Coordinator Q3 Protocol adapter SNMP Protocol adapter OSI DCN IP over OSI Tunnel SNMP session (IP traffic) IP over OSI tunnel (encapsulates IP traffic in OSI traffic) Q3 session Alcatel 1353NM Alcatel 1353NM rel. 7.00 Section 2 .2 1850TSS NE in MSPP Configuration Creating a 1850TSS NE in MSPP Configuration: OSI DCN Graphical Interfaces .85 When a pure OSI DCN is available.3. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006. Alcatel All rights reserved © 2006. primary) linked to the System Ethernet interface (e.Page 86 .2 1850TSS NE in MSPP Configuration Creating a 1850TSS NE in MSPP Configuration: OSI DCN [cont.g. 7.3.Module 2 .4 Operation All rights reserved © 2006.g. Alcatel 3FL41020ACAAWBZZA Edition 1.: “primary” and “virtual” are only specimens used to explain the roles of the two supervision areas. virtual) dedicated to the IP over OSI Tunnel A OSI_MANAGER and a ositunnel associated to the “virtual” Supervision_Area A EMLIM4G associated to both the “primary” and the “virtual” Supervision_Area Check the correct configuration and process status with the System Administrator N. lan0) A Necom_SubSystem associated to this Supervision_Area A Supervision_Area (e. the 1850TSS NE can be created and correctly supervised only if the following processes have been configured and are running on the 1353NM System: A Supervision_Area (e.Network Topology 2 . The administrator is free to give any other name to the processes involved Alcatel 1353NM Alcatel 1353NM rel.2.] Graphical Interfaces .B.86 In this case.00 Section 2 .g.2 . Check/Configure the LAPD and the Ethernet interface in the NE by the CT 7. Configure the IP Static Routing Configuration into the NE 10. Check the correct configuration and process status with the System Administrator (see previous page) 2. Alcatel All rights reserved © 2006.Network Topology 2 .4 Operation All rights reserved © 2006.2 . Create the 1850TSS NE 3. Check/Configure the OSI Local Address of the NE by the CT 4. 7.2. Create the IP over OSI Tunnel into the 1353NM Alcatel 1353NM Alcatel 1353NM rel. Configure the NE address (both NSAP and IP or at least one of the two) in the 1353NM 8.Module 2 .Page 87 . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 .3. Check/Configure the OS Address in the NE by the CT 6. Configure the IP over OSI tunnel into the NE 9.2 1850TSS NE in MSPP Configuration Creation Procedure: OSI DCN Graphical Interfaces .87 The following procedure must be applied 1. Check/Configure the IP Local Address of the NE by the CT 5. Alcatel 3FL41020ACAAWBZZA Edition 1. ask to the System Administrator for their instantiation All rights reserved © 2006.Page 88 . 7.88 1.2 .Network Topology 2 .Module 2 .4 Operation All rights reserved © 2006. Alcatel If the required processes are not running.00 Section 2 . Click on Primary Supervision Area linked to a Necom OSI stack EMLIM4G Ositunnel and Osi_Manager Alcatel 1353NM Alcatel 1353NM rel.3.2 1850TSS NE in MSPP Configuration Creation Procedure (OSI DCN): Step 1 Graphical Interfaces .2. 7.2. In this case.3. Alcatel The above procedure leads to an automatic choice of the Supervision Area and EML-IM made by the 1353NM system.89 1. Close the window or create more NEs Alcatel 1353NM Alcatel 1353NM rel.00 Section 2 . All rights reserved © 2006.2 1850TSS NE in MSPP Configuration Creation Procedure (OSI DCN): Step 2 Graphical Interfaces . Fill in the NE Creation window Select the appropriate: NE family: TransportServiceSwitch Type of equipment: 1850TSS-320 Release of equipment Fill in the two mandatory fields : User label Location Name 4. Alcatel 3FL41020ACAAWBZZA Edition 1.2 .Page 89 . Click Apply to launch the creation The created NE appears on the submap 5. Open the related submap 2. the system takes into account the load of each available EML-IM among the “EMLIM4G” ones trying to make it homogeneous.4 Operation All rights reserved © 2006. Choose Declarations Create NE 3.Module 2 .Network Topology 2 . Alcatel 3FL41020ACAAWBZZA Edition 1. “virtual”) EML domain (102) Alcatel 1353NM Alcatel 1353NM rel.g. expand the tree structure up to the EML-IM list. select 1353NM icon then click on In the Process Monitoring window .Module 2 .] Graphical Interfaces .4 Operation All rights reserved © 2006.Page 90 . Identify the processes which can be in charge of the NE to be created. open the Process Monitoring window as follow: From TMN-OSs Management window. linked with an IP over OSI tunnel.Network Topology 2 . associated to the chosen EMLIM4G (e. the fields “Supervision Area” and “EML Domain “ have to be used. Alcatel All rights reserved © 2006.3. To do that.2 1850TSS NE in MSPP Configuration Creation Procedure (OSI DCN): Step 2 [cont.2.90 The NE creation form gives the operator the opportunity to select himself a particular EML-IM. 7. EML domain must be chosen among the “EMLIM4G” The Supervision Area must be the secondary supervision area.2 .00 Section 2 . To display the list of the existing EMLIMs. configure or modify and click "OK” If no modification is done.91 By the CT.2.Page 91 . click ”Cancel” Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006.Module 2 . get or configure the NE NSAP address from the Equipment View (NE): Select menu Configuration Comm/Routing Local Configuration OSI Configuration If already configured the following addresses are shown: Presentation: Session: Transport: 00 0002 00 If necessary. Alcatel 3FL41020ACAAWBZZA Edition 1.2 .Network Topology 2 . Alcatel To open the Equipment view from 1320CT: Select the supervised NE into the map Supervision NE Login All rights reserved © 2006.2 1850TSS NE in MSPP Configuration Creation Procedure (OSI DCN): Step 3 Graphical Interfaces .3. 7.00 Section 2 . 4 Operation All rights reserved © 2006.Network Topology 2 .3.Page 92 .92 By the CT. 7. get or configure the IP NE address from the Equipment View (NE): Select menu Configuration Comm/Routing Local Configuration IP Configuration Assign the IP Address and click “Apply” If no modification is done. Alcatel 3FL41020ACAAWBZZA Edition 1.2. click ”Close” Alcatel 1353NM Alcatel 1353NM rel.2 .Module 2 .2 1850TSS NE in MSPP Configuration Creation Procedure (OSI DCN): Step 4 Graphical Interfaces .00 Section 2 . Alcatel All rights reserved © 2006. Page 93 .00 Section 2 .Module 2 . 7.93 By the CT. configure the OS address on the NE from the Equipment View (NE): Select menu Configuration Comm/Routing OS Configuration Enter the main (and the spare if any) OS NSAP addresses: Click “OK“ Alcatel 1353NM Alcatel 1353NM rel.2.2 . Alcatel 3FL41020ACAAWBZZA Edition 1.Network Topology 2 .3. Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006.2 1850TSS NE in MSPP Configuration Creation Procedure (OSI DCN): Step 5 Graphical Interfaces . Module 2 .94 By the CT. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006. 7.4 Operation All rights reserved © 2006.3. verify or set the LAPD configurations from the Equipment View (NE): Select menu Configuration Comm/Routing Interfaces Configuration LAPD Configuration For each SDH port between the GNE and any other NE to reach.00 Section 2 .2. make sure the LAPD interfaces are created and configured : “Network” / “User” Network Protocol = IP and OSI Click “Apply” to confirm any modification then ”Close“ Alcatel 1353NM Alcatel 1353NM rel.Page 94 .2 1850TSS NE in MSPP Configuration Creation Procedure (OSI DCN): Step 6 Graphical Interfaces .2 .Network Topology 2 . enable the Ethernet configuration if necessary from the Equipment View (NE): Select menu Configuration Comm/Routing Interfaces Configuration Ethernet Configuration Click on yes to enable it Network Protocol = OSI Click “Apply” to confirm any modification then ”Close“ Alcatel 1353NM Alcatel 1353NM rel.Page 95 . 7.Module 2 .] Graphical Interfaces .4 Operation All rights reserved © 2006.2 1850TSS NE in MSPP Configuration Creation Procedure (OSI DCN): Step 6 [cont.Network Topology 2 .00 Section 2 .2.95 By the CT. Alcatel For the gateway NE it is necessary to enable the Ethernet interface All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.3.2 . it is enough to configure only one of the two addresses: OSI or IP.Y. in the "declared" state).2 . Alcatel 3FL41020ACAAWBZZA Edition 1. In the declaration phase.96 Configure the address of the NE on the 1353NM Select the NE to be addressed Select the menu Declarations Set Addresses Presentation: Session: Transport: NE Address 0002 00 00 Enter the values for the selectors Enter the NSAP address (as for Local Configuration) Configure the “IP Address” field: X. Alcatel The NE address can be modified only if the NE is not supervised (i. 7.e.Module 2 .2 1850TSS NE in MSPP Configuration Creation Procedure (OSI DCN): Step 7 Graphical Interfaces .3.Page 96 .W:161 (the UDP Port is always 161) Click Apply then close Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006. The remaining one will be automatically discovered when the supervision process is started All rights reserved © 2006.Z. However.Network Topology 2 .00 Section 2 .2. it can still be displayed. then insert the NSAP (OSI) Address of the 1353NM 3.2 . Click on “New”. From the NE Equipment View. IP Routing = “None” Alcatel 1353NM Alcatel 1353NM rel. Alcatel All rights reserved © 2006.00 Section 2 .Module 2 .3. click on 2.Network Topology 2 .4 Operation All rights reserved © 2006.2. Alcatel 3FL41020ACAAWBZZA Edition 1.97 1. 7.Page 97 .2 1850TSS NE in MSPP Configuration Creation Procedure (OSI DCN): Step 8 Graphical Interfaces . 7.4 Operation All rights reserved © 2006. click on 2. Select “CLNP Tunnel” and choose the relevant tunnel among the configured ones Alcatel 1353NM Alcatel 1353NM rel.2 1850TSS NE in MSPP Configuration Creation Procedure (OSI DCN): Step 9 Graphical Interfaces .Module 2 . Alcatel All rights reserved © 2006.2 . From the NE Equipment View.98 1.Network Topology 2 .2.3. Insert the IP Address of the tunnel defined in the 1353NM system configuration (ask the System Administrator) 3. Alcatel 3FL41020ACAAWBZZA Edition 1.Page 98 .00 Section 2 . 99 1. Alcatel All rights reserved © 2006.2 1850TSS NE in MSPP Configuration Creation Procedure (OSI DCN): Step 10 Graphical Interfaces . Click on “NE Administration” and then on “IP over Osi Tunneling” Alcatel 1353NM Alcatel 1353NM rel. issue “1353NM Admin” 2.Module 2 .00 Section 2 .4 Operation All rights reserved © 2006.2 .2. 7.3. From the TMN-OS Management. Alcatel 3FL41020ACAAWBZZA Edition 1.Page 99 .Network Topology 2 . 2. 7.Page 100 .00 Section 2 .100 4.] Graphical Interfaces . Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006. Set Tunnel Type = ALCATEL and then Confirm 3.Network Topology 2 .3. Select the 1850TSS NE.2 .2 1850TSS NE in MSPP Configuration Creation Procedure (OSI DCN): Step 10 [cont.4 Operation All rights reserved © 2006. Alcatel 1353NM Alcatel 1353NM rel.Module 2 . issued by a unix shell.4 Operation All rights reserved © 2006.Page 101 .2.101 5. Alcatel 3FL41020ACAAWBZZA Edition 1.2 . Add the NE IP (SNMP agent) on Tunnel: Now the user can start supervision also on the data SNMP agent of the 4G NE Alcatel 1353NM Alcatel 1353NM rel.00 Section 2 .] Graphical Interfaces . set by the system administrator by updating the /etc/host file): All rights reserved © 2006.3. Alcatel The command “netstat –r”. 7.2 1850TSS NE in MSPP Configuration Creation Procedure (OSI DCN): Step 10 [cont.Module 2 .Network Topology 2 . shows the configured tunnel in the routing table (virtual is the hostname of the ositunnel. Page 102 . Alcatel 3FL41020ACAAWBZZA Edition 1. 7.Network Topology 2-2- 102 Alcatel 1353NM Alcatel 1353NM rel.Module 2 .4 Operation All rights reserved © 2006. Alcatel This page is left blank intentionally All rights reserved © 2006.Blank Page Graphical Interfaces .00 Section 2 . 7.4 Operation All rights reserved © 2006.Network Topology 2 .2 .00 Section 2 . Alcatel All rights reserved © 2006.103 2.Graphical Interfaces .3 1850TSS NE in Full Data Configuration Alcatel 1353NM Alcatel 1353NM rel.Module 2 .Page 103 .3. Alcatel 3FL41020ACAAWBZZA Edition 1. only the SNMP communication session needs to established between the 1353NM and the 1850TSS NE. through the 4G EMLIM. 4G EMLIM EML Coordinator Q3 Protocol adapter SNMP Protocol adapter SNMP TSS-320 Full Data SNMP Agent Alcatel 1353NM Alcatel 1353NM rel. Therefore. by means of the only SNMP communication session.3 1850TSS NE in Full Data Configuration Creating a 1850TSS NE in Full Data Configuration Graphical Interfaces .2 .4 Operation All rights reserved © 2006. At present time. Alcatel 3FL41020ACAAWBZZA Edition 1. All rights reserved © 2006. a TCP/IP DCN is needed in order to manage the equipment. the NE in this configuration is not yet available.3.00 Section 2 .Page 104 . 7. Alcatel In this configuration.2.Network Topology 2 .Module 2 .104 A 1850TSS NE in Full Data configuration is managed by the 1353NM. Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006.Module 2 . 7.2 .4 Creating and Addressing a SNMP NE Alcatel 1353NM Alcatel 1353NM rel.105 2. Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 .Page 105 .Network Topology 2 .Graphical Interfaces . 4 Creating and Addressing a SNMP NE Prerequisites Graphical Interfaces .106 A SNMP NE can be created and correctly supervised only if the following processes have been configured and are running on the 1353NM System: A Supervision_Area linked to the System Ethernet interface (e.Module 2 .2.Page 106 .2 . 7.4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006.00 Section 2 .Network Topology 2 . lan0) A EMLIMCORBASNMP associated to the same Supervision_Area Check the correct configuration and process status with the System Administrator Alcatel 1353NM Alcatel 1353NM rel.g. Alcatel 3FL41020ACAAWBZZA Edition 1. Close the window or create more NEs 6. Manage the related addresses (NE & OS). Choose Declarations Create NE 3. Alcatel 3FL41020ACAAWBZZA Edition 1.Network Topology 2 . Fill in the NE Creation window Select the appropriate: NE family Type of equipment Release of equipment Fill in the two mandatory fields : User label Location Name 4. Click Apply to launch the creation The created NE appears on the submap 5.4 Creating and Addressing a SNMP NE NE Creation Graphical Interfaces .00 Section 2 .2 . the system takes into account the load of each available EML-IM among the “EMLIMADMQ3” ones trying to make it homogeneous. 7.Module 2 .2. In this case. All rights reserved © 2006.107 1. Alcatel The above procedure leads to an automatic choice of the Supervision Area and EML-IM made by the 1353NM system. Open the related submap 2.4 Operation All rights reserved © 2006. See next pages. Alcatel 1353NM Alcatel 1353NM rel.Page 107 . expand the tree structure up to the EMLIM list.4 Creating and Addressing a SNMP NE EMLIM and Supervision Area assignement Graphical Interfaces . The “Process Monitoring” analysis of the system can be helpful to make such a choice.Page 108 . 7.Network Topology 2 .108 The NE creation form gives the operator the opportunity to select himself a particular EML-IM. Identify the processes which can be in charge of the NE to be created.00 Section 2 . select 1353NM icon then click on In the Process Monitoring window . open the Process Monitoring window as follow: From TMN-OSs Management window. Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.2. To do that.Module 2 .2 . Alcatel All rights reserved © 2006. the fields “Supervision Area” and “EML Domain “ have to be used. EML domain must be chosen among the “EMLIMCORBASNMP” ones EML domain (103) Alcatel 1353NM Alcatel 1353NM rel. To display the list of the existing EMLIMs. 109 Based on the specific NE to be created and the DCN topology.Page 109 .Module 2 . it must be reached via its Local Address Configuration Comm/Routing Local Configuration Please refer to the specific NE documentation for details Alcatel 1353NM Alcatel 1353NM rel. by the CT get or configure the NE address from the Equipment View (NE): Some SNMP NEs must be reached via their Local Address Configuration Configuration Comm/Routing Comm/Routing Local Configuration Ethernet Configuration Some other SNMP NEs must be reached via their Ethernet Interface Address If the NE is connected to the DCN via the LAPD interface.4 Operation All rights reserved © 2006.4 Creating and Addressing a SNMP NE NE addressing Graphical Interfaces .00 Section 2 .Network Topology 2 . Alcatel To open the Equipment view from 1320CT: Select the supervised NE into the map Supervision NE Login All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.2.2 . 7. Page 110 .W:161 Click Apply then close Alcatel 1353NM Alcatel 1353NM rel.110 Configure the address of the NE on the 1353NM Select the NE to be addressed Select the menu Declarations Set Addresses NE Address Enter the IP address (as for Local or Ethernet Configuration) followed by the UDP Port.2. in the "declared" state).Y. However.Network Topology 2 .00 Section 2 .4 Operation All rights reserved © 2006.Module 2 .] Graphical Interfaces .4 Creating and Addressing a SNMP NE NE addressing [cont.e. Alcatel The NE address can be modified only if the NE is not supervised (i. Alcatel 3FL41020ACAAWBZZA Edition 1.2 . UDP Port is always 161: X. 7. All rights reserved © 2006.Z. it can still be displayed. Alcatel 3FL41020ACAAWBZZA Edition 1.Network Topology 2 .Graphical Interfaces .00 Section 2 .2 .111 2. Alcatel All rights reserved © 2006.Page 111 .5 NE Autodiscovery Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006. 7.Module 2 . 2.) Furthermore.2 . and the node is considered ready to support live traffic NE-autodiscovery procedure (bottom-up) is anyway compatible with the traditional top-down method. routing protocols.4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006.5 NE Autodiscovery Principles Graphical Interfaces . DCN interconnecting the NE to the 1353NM must be up and running NE Autodiscovery procedure must be launched first by the CT after all the local transmission tests have been carried out. The following cosiderations apply: The NE must first be created in the Craft Terminal and the following parameters must be set-up by the CT: node name networking set-up (NE/OS addresses. 7. etc.Module 2 .Network Topology 2 . where new NEs are manually created on 1353NM Alcatel 1353NM Alcatel 1353NM rel.00 Section 2 .112 NE-autodiscovery is a feature that makes automatic the procedure of creating a new NE in the NM database.Page 112 . tunnels. 2.5 NE Autodiscovery Principles [cont.] Graphical Interfaces - Network Topology 2 - 2 - 113 The Discovery messages pass the following information: NE type & release NE name and location NE address OS address (Q3 only) The Discovery message is directly sent over the appropriate Layer 3 (CLNS – also for ISA Boards - or IP). No application session is established between the NE and 1353NM. Since the messages go through the node, they exploit the same DCN routes available to 1353NM when it will request the node supervision The procedure is different if the NE to be discovered is or not a 4G NE Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 113 2.5 NE Autodiscovery NON-4G NEs: CT Perspective Graphical Interfaces - Network Topology 2 - 2 - 114 If the NE to be discovered is NOT a 4G NE, the 1320CT (NES) provides a function dedicated to NE auto-discovery Node address is retrieved from the NE configuration, the list of target 1353NM is based on a list of platform names (offline edit) to avoid the manual set-up of the OS addresses for every NE In-field engineers get the result of the autodiscovery procedure DISCOVERY OK the autodiscovery message has been ack-ed by 1353NM, NOC team is now informed DISCOVERY KO the autodiscovery message has not been ack-ed by 1353NM Time-out expiration: 1353NM not available or DCN not OK Message refused by 1353NM: NE Tyep&Rel. Unknown, duplicated NE address, etc ACK DCN 1320CT Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation New NE! 1353NM All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 114 2.5 NE Autodiscovery CT Perspective for 4G NE Graphical Interfaces - Network Topology 2 - 2 - 115 If the NE to be discovered is a 4G NE, the auto-discovery function is directly exploited by the NE The 4G NE USM provides a “Autodiscovery” option, which triggers the discovery message directly from the NE to the 1353NM ACK DCN 1320CT New NE! 1353NM Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 115 2.5 NE Autodiscovery NON-4G NE: What to do on the CT Graphical Interfaces - Network Topology 2 - 2 - 116 1. Trigger the Autodiscovery Procedure by clicking on “NEAD Update” Warning: The NE Autodiscovery feature is available on the CT starting from the CT-K Rel 3.3 Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel For more detailed information, please refer to CT-K Rel. 3.3 Training Manual and Operator Handbook All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 116 2.5 NE Autodiscovery NON-4G NE: What to do on the CT [cont.] Graphical Interfaces - Network Topology 2 - 2 - 117 2. Select “NMs address config” 3. Insert the 1353NM Name and Address Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 117 2.5 NE Autodiscovery NON-4G NE: What to do on the CT [cont.] Graphical Interfaces - Network Topology 2 - 2 - 118 4. Choose the desired NM into the NE autodiscovery GUI 5. From the NE List, choose the relevant one 6. Click on Send Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 118 2.5 NE Autodiscovery What to do on 4G NE Graphical Interfaces - Network Topology 2 - 2 - 119 1. Trigger the Autodiscovery Procedure by issuing “Configuration Management Autodiscovery” Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 119 2.5 NE Autodiscovery What to do on 4G NE [cont.] Graphical Interfaces - Network Topology 2 - 2 - 120 2. Issue “Autodiscovery = Enable” 3. Click OK 4. Click “Cancel”: the window is closed 5. Open again the Autodiscovery window: the Status is now “Succeeded” 6. With “Autodiscovery = disable”, click OK to stop the procedure, then Cancel Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 120 2.5 NE Autodiscovery What to do on the NM Graphical Interfaces - Network Topology 2 - 2 - 121 On receipt of the NE autodiscovery message coming from the NE, into the NM the AS (Alarm Surveillance) application generates a Warning alarm into the specific “NE Autodiscovery” sublist. Then, the NE operator has two choices: Navigate from the Autodiscovery alarm to “Create NE” Open the “NE Autodiscovery” application from the TMN-OS and then click on “Create NE” In both cases, the Create NE Dialog window is presented to the operator. Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 121 2.5 NE Autodiscovery What to do on the NM [cont.] Graphical Interfaces - Network Topology 2 - 2 - 122 1. From the AS, click on “External Application Related EmlUsm”, or.... Next Page 1. ... from the TMN-OS, click on “NE Autodiscovery Create NE Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 122 2 . Chose or leave unspecified Supervision Area and EML domain The NE can also be refused Alcatel 1353NM Alcatel 1353NM rel. Click on Create 3.123 New NE 1. Optionally.] Graphical Interfaces .4 Operation All rights reserved © 2006.Page 123 . Click on the NE(s) to be created 2. Alcatel 3FL41020ACAAWBZZA Edition 1. the user can modify the NE name or the Location name 4. Alcatel All rights reserved © 2006.Module 2 .Network Topology 2 .5 NE Autodiscovery What to do on the NM [cont.00 Section 2 . 7.2. 124 Ne new NE has been created into the NM database with the parameters contained in the “Create NE” window Alcatel 1353NM Alcatel 1353NM rel.5 NE Autodiscovery What to do on the NM [cont.Module 2 .2.2 .] Graphical Interfaces .4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. 7.Page 124 .Network Topology 2 .00 Section 2 . Alcatel All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. By the CT.Page 125 .00 Section 2 . Clicking on “Create NE” the ISA board is created into the NM database Alcatel 1353NM Alcatel 1353NM rel. 7. click on the “send” button A warning alarm is generated into the AS and the NM operator can then open the “Create NE” dialog window In this window.Module 2 .2. 3.125 Also ISA board can be created using the NE autodiscovery feature.Network Topology 2 .2 . provided that: 1. The ISA board must be first created in the NE together with its IP address. the 2. Alcatel All rights reserved © 2006. 5. 4. DCN must be up and running with all the necessary IP over OSI tunnels.4 Operation All rights reserved © 2006. the parameters of the ISA board to be created are shown and the user can modify some of them (NE name and Location name).5 NE Autodiscovery ISA board Autodiscovery Graphical Interfaces . issue the “NE autodiscovery” window After having selected the ISA board to auto-discover. Network Topology 2-2- 126 Alcatel 1353NM Alcatel 1353NM rel.Blank Page Graphical Interfaces .Page 126 .00 Section 2 .4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel This page is left blank intentionally All rights reserved © 2006. 7.Module 2 . Alcatel All rights reserved © 2006.Page 127 .00 Section 2 . 7.Module 2 .127 2.4 Operation All rights reserved © 2006.2 . Alcatel 3FL41020ACAAWBZZA Edition 1.Graphical Interfaces .6 Map Population Alcatel 1353NM Alcatel 1353NM rel.Network Topology 2 . Alcatel 3FL41020ACAAWBZZA Edition 1. an NE). To do this. Alcatel The procedures for creating NE’s which have been previously presented add an entry in the database of the IM process and adds an icon to the current submap (USM).Module 2 . 7. even icons belonging to different maps. For NEs already created in the database.2 . Several icons.4 Operation NE2 Processing database All rights reserved © 2006.e. can be linked to a given database entry (i.6 Map Population Map and IM database Graphical Interfaces . This icon is linked to the entry in the IM database.00 Section 2 .2.Page 128 . the operator has to work from the “Global Inventory” (See next page).Network Topology 2 . one more related icon can be added to any submap at any time.128 USM IM icon N°1 NE1 (Map 1) NE1 icon N°2 NE1 (Map 2) Graphic database Alcatel 1353NM Alcatel 1353NM rel. All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 .Page 129 . Select the menu Tools NE Inventory Global 2. Alcatel All rights reserved © 2006. Select the targeted NEs from the list Alcatel 1353NM Alcatel 1353NM rel.6 Map Population Populating the map from the OS MIB Graphical Interfaces .129 This procedure can be used to add an NE icon to a submap if the NE already exists in the database 1. 7.2 .Module 2 .4 Operation All rights reserved © 2006.Network Topology 2 . The list of NEs already created appears 3.2. 2 . 7.Network Topology 2 .2. Select the menu Inventory Population 5. change the population selection 6.Module 2 .130 4.6 Map Population Populating the map from the OS MIB Graphical Interfaces .00 Section 2 . Click Apply then Close Alcatel 1353NM Alcatel 1353NM rel. If necessary. Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.Page 130 . 00 Section 2 . Select the menu or or Edit Edit Edit Cut Delete Delete from all views Alcatel 1353NM Alcatel 1353NM rel. Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006. In the network topology view. select the NE to be deleted from the submap 2.131 This action simply deletes the NE from the current submap 1.2.Network Topology 2 . Alcatel 3FL41020ACAAWBZZA Edition 1. 7.Page 131 .Module 2 .2 .6 Map Population Deleting an NE from a submap Graphical Interfaces . 132 This action deletes the NE from the OS database 1) Select a NE in the map and Declarations Delete 2) Click Apply and Close after deletion Generic Alcatel 1353NM Alcatel 1353NM rel.Network Topology 2 .6 Map Population Deleting a NE from the MIB Graphical Interfaces . Alcatel 3FL41020ACAAWBZZA Edition 1. 7.00 Section 2 .2 .4 Operation All rights reserved © 2006.Module 2 .Page 132 .2. Alcatel All rights reserved © 2006. Page 133 .Network Topology 2 . Alcatel All rights reserved © 2006.2 Managing and addressing a NE on a map Exercise Graphical Interfaces .4 Operation All rights reserved © 2006.2 .Module 2 . 7. Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 .133 Exercise 1: Create and address a Q3 NE Exercise 2: Create and address a ISA Board Exercise 3: Create and address a 1850TSS NE in MSPP configuration Exercise 4: NE autodiscovery feature Exercise 5: Map population See next Pages Alcatel 1353NM Alcatel 1353NM rel. Network Topology 2 . Alcatel All rights reserved © 2006.2 Managing and addressing a NE on a map Exercise 1: Create and address a Q3 NE Graphical Interfaces .2 .00 Section 2 .4 Operation All rights reserved © 2006.Page 134 .Module 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.134 Create a NE Set addresses of this new NE Alcatel 1353NM Alcatel 1353NM rel. 7. set the IP routing configuration Create the IP over OSI tunnel Alcatel 1353NM Alcatel 1353NM rel.Network Topology 2 .4 Operation All rights reserved © 2006. For a “Host NE” and a related ISA board.2 . set the required configuration in order to create the corresponding “Sub NE” and create it. 7. Alcatel All rights reserved © 2006.Page 135 . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 .135 For a given ISA board.2 Managing and addressing a NE on a map Exercise 2: Create and address a ISA Board Graphical Interfaces .Module 2 . Network Topology 2 .136 Check the existence of the processes necessary to manage a 1850TSS NE Based on the DCN configuration: Create the NE Assign the address to the NE Set the IP routing configuration Create the IP over OSI tunnel if necessary Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.Page 136 .2 Managing and addressing a NE on a map Exercise 3: Create and address a 1850TSS NE in MSPP configuration Graphical Interfaces .2 .00 Section 2 .4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006. 7.Module 2 . Page 137 .Module 2 . Alcatel All rights reserved © 2006.00 Section 2 .4 Operation All rights reserved © 2006.2 Managing and addressing a NE on a map Exercise 4: NE Autodiscovery Graphical Interfaces .137 Perform the Autodiscovery procedure for a 1850TSS NE Alcatel 1353NM Alcatel 1353NM rel.Network Topology 2 . Alcatel 3FL41020ACAAWBZZA Edition 1. 7.2 . 2 . Alcatel All rights reserved © 2006.2 Managing and addressing a NE on a map Exercise 5: MAP Population Graphical Interfaces . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.00 Section 2 .Module 2 . 7.Network Topology 2 .Page 138 .138 Add a NE on the map from the OS MIB Remove from the MIB one of the previously created NEs Alcatel 1353NM Alcatel 1353NM rel. Module 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.Network Topology 2 . Alcatel All rights reserved © 2006.Page 139 . 7.139 3 Creating a Graphical Connection Alcatel 1353NM Alcatel 1353NM rel.2 .00 Section 2 .Graphical Interfaces . Open the submap Click on the symbol which is the source of the connection (first NE) Shift-Click on the symbol which is the destination of the connection (second NE) Select the menu Edit Add Connection Select a Type in the list Define a User Label Click Apply and Close Alcatel 1353NM Alcatel 1353NM rel. 4.Network Topology 2 .4 Operation All rights reserved © 2006.B.Module 2 .3 Creating a graphical connection Procedure Graphical Interfaces . 6. it is not managed by the 1353NM as an SDH object 1. 7.00 Section 2 .Page 140 .140 Two symbols can be linked by a connection This connection is nothing else than a graphical object and therefore. 3. 7. 5. The User Label MUST be a unique name without spaces All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.2 . Alcatel N. 2. Page 141 .4 Operation All rights reserved © 2006.141 Alcatel 1353NM Alcatel 1353NM rel.2 .Module 2 . 7.00 Section 2 .3 Creating a graphical connection Final submap view Graphical Interfaces . Alcatel All rights reserved © 2006.Network Topology 2 . Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel This page is left blank intentionally All rights reserved © 2006.Network Topology 2-2- 142 Alcatel 1353NM Alcatel 1353NM rel.Blank Page Graphical Interfaces .4 Operation All rights reserved © 2006.00 Section 2 .Module 2 .Page 142 . Alcatel 3FL41020ACAAWBZZA Edition 1. 7. Network Topology 2 .00 Section 2 .4 Operation All rights reserved © 2006. 7.3 Creating a graphical connection Exercise Graphical Interfaces . Alcatel All rights reserved © 2006.Page 143 . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 2 .143 Create a connection between two NEs Alcatel 1353NM Alcatel 1353NM rel.2 . 00 Section 2 . Alcatel This page is left blank intentionally All rights reserved © 2006.Blank Page Graphical Interfaces .4 Operation All rights reserved © 2006.Network Topology 2-2- 144 Alcatel 1353NM Alcatel 1353NM rel.Page 144 . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 2 . 7. Module 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.Graphical Interfaces .00 Section 2 . 7.2 .4 Operation All rights reserved © 2006.Page 145 .145 4 Creating the GNE List Alcatel 1353NM Alcatel 1353NM rel.Network Topology 2 . Alcatel All rights reserved © 2006. Module 2 .146 The GNE list is manually created by the operator The 1353NM doesn't check information validity This list could be used to make easier IP tunneling creation Action 1353NM Admin NE administration List Gateway NE Alcatel 1353NM Alcatel 1353NM rel.Page 146 .2 .4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006.4 Creating the GNE list Principle Graphical Interfaces .00 Section 2 .Network Topology 2 . 7. Select the NE 2.Page 147 . Enter the IP address if necessary (for IP tunneling) Refresh Save data on the disk 4. Click here to modify the address 3.00 Section 2 .4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006.2 . OK Alcatel 1353NM Alcatel 1353NM rel.Module 2 .4 Creating the GNE list Display a GNE list Graphical Interfaces . Alcatel 3FL41020ACAAWBZZA Edition 1.147 Display Filter 1.Network Topology 2 . 7. Alcatel 3FL41020ACAAWBZZA Edition 1. 7.Module 2 . Alcatel This page is left blank intentionally All rights reserved © 2006.Blank Page Graphical Interfaces .Network Topology 2-2- 148 Alcatel 1353NM Alcatel 1353NM rel.00 Section 2 .Page 148 .4 Operation All rights reserved © 2006. 2 .Page 149 . Alcatel All rights reserved © 2006.4 Creating the GNE list Exercise Graphical Interfaces . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 .149 Set the GNE list to match the network structure Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006.Module 2 .Network Topology 2 . 7. Blank Page Graphical Interfaces .00 Section 2 .Page 150 . Alcatel 3FL41020ACAAWBZZA Edition 1. 7. Alcatel This page is left blank intentionally All rights reserved © 2006.4 Operation All rights reserved © 2006.Network Topology 2-2- 150 Alcatel 1353NM Alcatel 1353NM rel.Module 2 . Alcatel All rights reserved © 2006.Graphical Interfaces .2 .Page 151 .00 Section 2 .4 Operation All rights reserved © 2006.Network Topology 2 . 7.151 5 Addressing the NEs with IP Tunnel: OSI over IP Alcatel 1353NM Alcatel 1353NM rel.Module 2 . Alcatel 3FL41020ACAAWBZZA Edition 1. Network Topology 2 .00 Section 2 . the routers only need to support the IP protocol. 7.Page 152 . Alcatel NE have to be compatible with this feature All rights reserved © 2006. The NE and the 1353NM server need to support the OSI and IP protocols.4 Operation All rights reserved © 2006.152 OSI over IP tunneling is a technique that consists in the insertion (encapsulation) of the OSI traffic in IP packets. The extremities of the tunnels are typically a 1353NM server and an NE. The DCN connecting the 1353NM and the NE will carry IP packets.5 Addressing NEs with IP tunnel:OSI over IP Principle Graphical Interfaces . SH IS-IS ES-IS CLNP NE IS-IS ES-IS CLNP IP Packets IP network Alcatel 1353NM Alcatel 1353NM rel.2 . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 2 . 5 Addressing NEs with IP tunnel: OSI over IP Network example Graphical Interfaces - Network Topology 2 - 2 - 153 1353NM CLNP GRE IP 802.2 Ethernet IP network OSI over IP GNE OSI NE OSI OSI NE OSI over IP IP network GNE OSI NE OSI OSI network OSI GNE OSI NE Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel The OSI-over-IP can be used to: 1. Interconnect the 1353NM to a GNE through an IP network. In this case, the connectivity is provided also with all the other NEs reachable from this GNE (e.g. using OSI protocol on DCC). 2. Interconnect the 1353NM to a Router through an IP network. In this case, 1353NM will be able to manage all the NEs reachable via that router using OSI protocol. 3. Interconnect two NEs one to each other, e.g. one of them being located at customer premises and not being reachable using DCCs, or one NE with a Router. In this scope, the OSI-over-IP feature of 1353NM is not used. Warning: SH: max 32 tunnels per LAN I/F Tunnels give important processing load to terminating nodes Take care of L2 backbone design All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 153 5 Addressing NEs with IP tunnel : OSI over IP NE Configuration Procedure Graphical Interfaces - Network Topology 2 - 2 - 154 On the 1320 CT (Equipment view): 1. Start the supervision of the NE and Login 2. Choose the menu Configuration (3) Comm/Routing Configuration Configuration Interfaces Ethernet 3. Check that the Ethernet interface is enabled 4. In the part IP Section, set the IP address of the NE and the network mask 5. Click on Apply (4) (5) Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 154 5 Addressing NEs with IP tunnel : OSI over IP NE Configuration Procedure [cont.] Graphical Interfaces - Network Topology 2 - 2 - 155 Configuration Comm/Routing Tunneling Configuration OSI over IP 7. Set the Remote Destination IP Address to match the IP address of the 6. Choose the menu 1353NM server 8. Click on Apply (7) (8) Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel The IP address of the SH can be get by typing the command “cat /etc/hosts” in a UNIX terminal from 1353NM All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 155 5 Addressing NEs with IP tunnel : OSI over IP 1353 NM Configuration Procedure [cont.] Graphical Interfaces - Network Topology 2 - 2 - 156 On the 1353NM : 1. From TMN-OSs Management window, select the 1353NM icon then Actions 1353NMAdmin 2. Select the menu NE Administration and IP Tunneling Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 156 5 Addressing NEs with IP tunnel : OSI over IP 1353 NM Configuration Procedure [cont.] Graphical Interfaces - Network Topology 2 - 2 - 157 3. Click on Create to open the corresponding window and enter the previous NE IP Address (inserted in Ethernet Configuration), or select it from the GNE List, and give the IP Tunnel ID (from 0 to 31): Enter IP Address or choose the GNE from the list Define the IP Tunnel ID Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation Confirm All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 157 Blank Page Graphical Interfaces - Network Topology 2-2- 158 Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel This page is left blank intentionally All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 158 5 Addressing NEs with IP tunnel : OSI over IP Exercise Graphical Interfaces - Network Topology 2 - 2 - 159 Create an IP tunnel between 1353NM and an NE Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 159 Blank Page Graphical Interfaces - Network Topology 2-2- 160 Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel This page is left blank intentionally All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 160 Graphical Interfaces - Network Topology 2 - 2 - 161 6 Distributing Maps Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 161 6 Distributing maps Principle of distribution Graphical Interfaces - Network Topology 2 - 2 - 162 DCN Master server Map dB DCN Presentation server USM Map dB Local LocalMaps Maps Local LocalMaps Maps USM Distribute map Distributed Distributed Network NetworkMaps Maps IM IM(DNM (DNM- -IM) IM) Get map distribute map IM DNM-IM Maps Get map DCN Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel DNM: Distributed Network Map Distributed maps are accessible from any workstation. They are saved when the application is backed up. All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 - Module 2 - Page 162 2 . click Close Alcatel 1353NM Alcatel 1353NM rel. 7. 3.6 Distributing maps Saving as distributed maps Graphical Interfaces . 4. 2. Alcatel 3FL41020ACAAWBZZA Edition 1.Page 163 . 5. 6. Open the local map Select File Save Map as… Enter the Name of the distributed map Enter any useful comment Click OK After update. Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006.Network Topology 2 .163 1.Module 2 .00 Section 2 . 7. Select the map from the "Map Tree" list 4.Module 2 . Click the Retrieve button 5. Alcatel All rights reserved © 2006. Create a new map 2. Click the Close button Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006.6 Distributing maps Retrieving distributed maps Graphical Interfaces . Select File Map Management 3.Page 164 .2 .164 1.Network Topology 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 2 . Page 165 .Module 2 .165 PNM USM Local displayed map DNM IM DNM map 1 map 2 map 3 PNM USM Local displayed map DNM IM DNM map 1 map 2 map 3 map 4 * map 4 map 4 After "save as" or " retrieve" Alcatel 1353NM Alcatel 1353NM rel.6 Distributing maps Locked maps Graphical Interfaces . Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.2 .00 Section 2 . 7.Network Topology 2 . As soon as the user select a new empty map or retrieves another map. Alcatel A distributed map is marked by the system as “Locked” by the user who has retrieved it last.6 Distributing maps Unlocking distributed maps Graphical Interfaces .4 Operation All rights reserved © 2006. the Locked attribute is reset. Click the Unlock button 4.Page 166 . Click the Close button Alcatel 1353NM Alcatel 1353NM rel.00 Section 2 . It is kept Locked until this map is displayed by the Map Management.Network Topology 2 .166 A map is locked when it is opened to be modified. but it can always be unlocked 1. If another user (user2) issues the retrieving of a distributed map while it is Locked by another user (user1). Alcatel 3FL41020ACAAWBZZA Edition 1. Select the menu File Map Management 2. 7. user2 must “Unlock” the map. Select the map in the "Map Tree" list 3.2 .Module 2 . This triggers two actions: user1 is adviced that the map has been unlocked by user2 The map is marked as locked by user2 All rights reserved © 2006. 2 . Click the Delete button 4.4 Operation All rights reserved © 2006.6 Distributing maps Deleting a distributed map Graphical Interfaces . Click the Close button Alcatel 1353NM Alcatel 1353NM rel.167 This operation deletes a map from the list of distributed maps previously stored in the DNM database 1.Page 167 . Alcatel All rights reserved © 2006. Select the menu File Map Management 2. 7.Network Topology 2 .00 Section 2 .Module 2 . Select the map in the "Map Tree" list 3. Alcatel 3FL41020ACAAWBZZA Edition 1. 7.Network Topology 2-2- 168 Alcatel 1353NM Alcatel 1353NM rel. Alcatel This page is left blank intentionally All rights reserved © 2006.00 Section 2 .Blank Page Graphical Interfaces . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.Page 168 .Module 2 . 6 Distributing maps Exercise Graphical Interfaces . 7.169 Distribute the map previously created Retrieve the map into a new local map Alcatel 1353NM Alcatel 1353NM rel.Page 169 .2 . Alcatel 3FL41020ACAAWBZZA Edition 1.Network Topology 2 .Module 2 .4 Operation All rights reserved © 2006.00 Section 2 . Alcatel All rights reserved © 2006. 00 Section 2 . 7.Module 2 . Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006.Page 170 .170 End of Module Network Topology Alcatel 1353NM Alcatel 1353NM rel.Graphical Interfaces .2 .Network Topology 2 . 4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006.00 Section 3 .Module 1 . Alcatel 3FL41020ACAAWBZZA Edition 1.Page 1 .Alcatel 1353NM rel. 7.00 Alcatel 1353NM .Section 3 System Operation Module 1 NE Supervision 3FL41020ACAAWBZZA Edition 1. NE Supervision 3-1-2 Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006.00 Section 3 . Alcatel 3FL41020ACAAWBZZA Edition 1. 7.Module 1 . Alcatel This page is left blank intentionally Document History Edition 01 Date 2007-02-07 Author Sangalli Roberto Remarks First edition All rights reserved © 2006.Page 2 .Blank Page System Operation . 1850TSS-320 and SNMP Network Element Alcatel 1353NM Alcatel 1353NM rel. Alcatel All rights reserved © 2006.NE Supervision 3-1-3 Objective: to be able to supervise a Q3.Module 1 .Page 3 . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.Objectives System Operation . 7.00 Section 3 . Module 1 .00 Section 3 .NE Supervision 3-1-4 Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1. 7. Alcatel This page is left blank intentionally All rights reserved © 2006.Page 4 .4 Operation All rights reserved © 2006.Objectives [cont.] System Operation . 4 Operation All rights reserved © 2006. 7.NE Supervision 3-1-5 Switch to notes view! 1 2 3 4 5 Displaying NE Management and Alarm State Modifying the Management State of a NE Simulator Schedule a MIB Backup Backing-up/Restoring the MIB Page 7 21 39 49 57 Alcatel 1353NM Alcatel 1353NM rel.Page 5 .Module 1 . Alcatel All rights reserved © 2006.Table of Contents System Operation . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 3 . Alcatel All rights reserved © 2006. 7.] System Operation .00 Section 3 .Table of Contents [cont.Page 6 . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 .4 Operation All rights reserved © 2006.NE Supervision 3-1-6 Switch to notes view! Page Alcatel 1353NM Alcatel 1353NM rel. 7.00 Section 3 .System Operation . Alcatel All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.Page 7 .Module 1 .NE Supervision 3-1-7 1 Displaying NE Management and Alarm State Alcatel 1353NM Alcatel 1353NM rel. NE Supervision 3-1-8 Supervision state Communication state Administrative state (not managed) Usage state (not managed) Alignment state Local access state Operational state (not managed) Alarm status NML assignment state Simulator state (for Q3 NE only) Alcatel 1353NM Alcatel 1353NM rel.00 Section 3 .Module 1 .Page 8 . Alcatel MIB alignment state for the Q3 NE: between the NE MIB and its representation in the simulator's database All rights reserved © 2006. 7.4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.1 Displaying NE management and alarm state Management states System Operation . 1 Displaying NE management and alarm state Supervision state System Operation . Alcatel Supervision state declared: the NE is simply created in the OS MIB but is not supervised supervised: the NE is under supervision activating: supervision is being started (no management task can be performed on the NE) deactivating: supervision is being stopped (no management task can be performed on the NE) All rights reserved © 2006.4 Operation All rights reserved © 2006.Module 1 .NE Supervision 3-1-9 SUP DECLARED Starting supervision… DEACTIVATING ACTIVATING Stopping supervision… SUP SUPERVISED Transient states Stable states Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.Page 9 .00 Section 3 . 7. 4 Operation All rights reserved © 2006.B. 7.10 1353 NM A 1353 NM has lost communication with the equipment … DISABLED ENABLED 1353 NM The equipment can be reached from the 1353 NM … Alcatel 1353NM Alcatel 1353NM rel.: If the equipment is a 1850TSS-320 in MSPP configuration.NE Supervision 3 . it has a double communication link with the OS (Q3 and SNMP).1 Displaying NE management and alarm state Communication state System Operation .1 . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 . Alcatel Communication state Disabled: The Communication between the OS and the NE is interrupted Enabled: The OS can communicate with the NE N. In this case the Communication state is Disabled only in case BOTH the links are down All rights reserved © 2006.Page 10 .00 Section 3 . the PM and NE.Module 1 . when the primary (Q3) or the secondary (SNMP) or both the communication links are down . No operation can be done on the NE Auditing: The NE is under OS supervision and the system is comparing the NE MIB with its image in the OS Aligned: the system becomes aligned when all the operations for synchronizing the 1353NM with the NE are fully completed. (Aligning up or down or Auditing). In Config: The NE is being configured and no alignment has been undertaken yet All rights reserved © 2006. Alcatel Alignment state: Misaligned: The NE MIB and its image in the OS are not identical. 7.: In case only one of the communication links are down. when the communication link between the 1353NM and the NE is down (Communication state = Disabled) • In case of 1850TSS-320 MSPP NE. No operation can be done on the NE Aligning Down: The system is performing a “MIB Align Downwards” operation. It turns into “Aligned” when the alignment phase is finished Aligning Up: The system is performing a “MIB Align Upwards” operation. the shown Alignment State is still “Misaligned”.N. the Communication state stays in Enabled During the alignment phase. the NE is in this state when: • The Supervision state is “Not supervised” • In case of Q3 or SNMP NE.1 Displaying NE management and alarm state Alignment state System Operation . The synchronization procedure involves the alarms.1 .B. Alcatel 3FL41020ACAAWBZZA Edition 1.Page 11 .NE Supervision 3 . Typically.11 Stable states Transient states MIB = 1353 NM ALIGNED ALIGNING UP MIB 1353 NM ALIGNING DOWN MIB 1353 NM AUDITING MIB 1353 NM MIB 1353 NM MISALIGNED ≠ 1353 NM MIB Alcatel 1353NM Alcatel 1353NM rel.00 Section 3 .4 Operation All rights reserved © 2006. 12 key Craft terminal The NE allows access from the craft terminal … GRANTED Supervision Access State Local Supervision Access State OS DENIED key Craft terminal The NE refuses modifications from the craft terminal … All rights reserved © 2006. Alcatel Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 .Page 12 .00 Section 3 .1 Displaying NE management and alarm state Local access state System Operation .4 Operation Local access state granted: the local craft terminal can modify the configuration denied: no change is allowed with the local craft terminal Critical requested: the local craft terminal has asked permission to OS and is waiting for a response (granted or denied) All rights reserved © 2006.NE Supervision 3 .1 . 7. 13 The alarm state indicates the most critical alarm present on the NE Critical Major Minor Warning Active Pending Clear Indeterminate Alcatel 1353NM Alcatel 1353NM rel.NE Supervision 3 .Module 1 .4 Operation All rights reserved © 2006.1 .Page 13 . Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel Indeterminate: the severity level cannot be defined by the resources which raise the alarm Clear: no alarm All rights reserved © 2006.1 Displaying NE management and alarm state Alarm states System Operation .00 Section 3 . 7. NE Supervision 3 .Module 1 .Page 14 . 7.00 Section 3 . Alcatel All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.14 It is accessible to the operator for reading only into the “Equipment View”: (MGR box) Gives information about the NE assignment to 2nd (EML) or 3rd (NML) level managers: RM SY manager NPOS EML manager … Alcatel 1353NM Alcatel 1353NM rel.1 .4 Operation All rights reserved © 2006.1 Displaying NE management and alarm state NML assignment state System Operation . Alcatel Simulator state disabled enabled activating: (no management task can be performed on the NE) deactivating: (no management task can be performed on the NE) The availability of the simulator depends on the type and release of the NE All rights reserved © 2006.1 .Module 1 . Alcatel 3FL41020ACAAWBZZA Edition 1.NE Supervision 3 .15 SIM DISABLED DEACTIVATING ENABLED Supervision Simulator Stop (in the equipment view) Supervision Simulator Start (in the equipment view) ACTIVATING SIM Transient states Concerns Q3 NEs only! Stable states Alcatel 1353NM Alcatel 1353NM rel.Page 15 . 7.00 Section 3 .1 Displaying NE management and alarm state Simulator state System Operation .4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.16 Display NE management states In the network topology view. In equipment view. Display simulator state for an NE 1. NEs or a single NE 2. select a NE Select the menu Tools View Equipment 3. Select the menu Operations Show Statuses 1.Page 16 .Module 1 . 2. Display NML assignment for an NE In the network topology view.Displaying NE management and alarm state Displaying NE states System Operation . Alcatel All rights reserved © 2006.1 .NE Supervision 3 .00 Section 3 .4 Operation All rights reserved © 2006. Move the mouse over MGR icon 4. 2. Read assignment on the bottom left of the window 1. move the mouse over SIM icon Read simulator state on the bottom left of the window Alcatel 1353NM Alcatel 1353NM rel. 7. select sites. Page 17 . Alcatel All rights reserved © 2006.Module 1 . one or more NEs 2. perform a manual refresh 1. In the network topology view.4 Operation All rights reserved © 2006. Select the menu Operations Resynchronize Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1. 7.1 .17 An automatic refresh is performed at regular intervals To check that the NE states displayed are up to date.1 Displaying NE management and alarm state Refreshing NE states System Operation .NE Supervision 3 . select a site.00 Section 3 . Page 18 .NE Supervision 3-1- 18 Alcatel 1353NM Alcatel 1353NM rel.00 Section 3 . Alcatel This page is left blank intentionally All rights reserved © 2006. 7.Blank Page System Operation .Module 1 .4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. 1 .Module 1 . Alcatel 3FL41020ACAAWBZZA Edition 1.NE Supervision 3 .00 Section 3 .1 Displaying NE management and alarm state Exercise System Operation .19 Display states for an NE Display states for a group of NEs Refresh the states for an NE Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006.Page 19 . Alcatel All rights reserved © 2006. 7. Page 20 . Alcatel This page is left blank intentionally All rights reserved © 2006.4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 3 .NE Supervision 3-1- 20 Alcatel 1353NM Alcatel 1353NM rel.Blank Page System Operation .Module 1 . 7. System Operation .21 2 Modifying the Management State of a NE Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.Module 1 .1 .00 Section 3 .NE Supervision 3 . Alcatel All rights reserved © 2006. 7.Page 21 . Alcatel 1353NM Alcatel 1353NM rel. start supervision and upload NE MIB (whether Align up or Align down is selected) 3. Alcatel 3FL41020ACAAWBZZA Edition 1. Select the menu Operations Supervision Align up or Align down 1.Module 1 .Page 22 .2 Modifying the management states of a NE Q3 or QB3* NEs: Starting supervision System Operation . select one or more sites and NEs 2.4 Operation Click Close All rights reserved © 2006.22 In the network topology view.NE Supervision 3 . Alcatel All rights reserved © 2006. For a Q3 NE. 7. OS Click on Apply in the Supervision window and wait for the result message to be displayed 4.1 .00 Section 3 . 23 In the network topology view. Select the menu Operations 1. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel In case of 1850TSS-320 MSPP NE. The 1353NM is in fact able to discover the missing address during the start supervision procedure. during the “Set NE Address” phase only one of the two addresses belonging to the NE (Q3 or SNMP) can be configured by the operator in the 1353NM (see Module “Network Topology” for details).00 Section 3 . All rights reserved © 2006. select one or more sites and NEs 2.NE Supervision 3 . 7. Alcatel 1353NM Alcatel 1353NM rel.Module 1 . Click on Apply in the Supervision window and wait for the result message to be displayed 4.1 .Page 23 .2 Modifying the management states of a NE SNMP or 1850TSS-320 MSPP NEs: Starting supervision System Operation .4 Operation Click Close All rights reserved © 2006. Supervision No Alignment 3. Module 1 .00 Section 3 . the good reflex is to ping the NE From the Map view.Page 24 . 7.2 Modifying the management states of a NE How to ping an NE System Operation .24 If the supervision doesn't start.1 .NE Supervision 3 . Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. select the relevant NE and issue: Operations Ping NE Alcatel 1353NM Alcatel 1353NM rel. a “NE not reach” critical alarm is issued in the Alarm Surveillance Application All rights reserved © 2006. 7.Page 25 .4 Operation All rights reserved © 2006. select the relevant NE and issue: Operations Ping NE The system pings both the management interfaces of the NE: Q3 and SNMP The reachable interfaces are marked with a green bullet The non-reachable interfaces are marked with a red bullet If one of the two interfaces is not reachable.NE Supervision 3 .Module 1 . Alcatel If one of the two interfaces are not reachable. the supervision is still started. but: the NE alarm state is set to “Critical” the NE alignment state is set to “Misaligned Alcatel 1353NM Alcatel 1353NM rel.2 Modifying the management states of a NE How to ping an NE: 1850TSS-320 MSPP NE System Operation . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 3 .25 From the Map view.1 . Page 26 .2 Modifying the management states of a NE How to ping an NE: Communication test Tool System Operation .4 Operation All rights reserved © 2006.Select the NE(s) Alcatel 1353NM Alcatel 1353NM rel. Ping selected NE(s) 1.Module 1 .26 From the TMN-OS window. 7.00 Section 3 . Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006. Display Filter 2.NE Supervision 3 .1 . then Ping NE: the “Communication Test Tool” will appear 1353NM Admin. select Actions then NE Administration. 2 Modifying the management states of a NE How to ping an NE Communication test Tool [Cont.1 .] System Operation . 7. Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.Page 27 .00 Section 3 . Results Alcatel 1353NM Alcatel 1353NM rel.NE Supervision 3 .27 3.Module 1 . retrieves collected PM data from NE before closing management session.4 Operation All rights reserved © 2006.NE Supervision 3 .00 Section 3 .28 Stopping supervision: stops management of the selected NE.2 Modifying the management states of a NE Stopping supervision System Operation .1 . 7. deactivates alarm collection and configurations. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006.Module 1 . Alcatel 1353NM Alcatel 1353NM rel.Page 28 . ] System Operation .Page 29 . Alcatel All rights reserved © 2006. Click on Stop Apply in the Supervision window and wait for the result message to be displayed 4.00 Section 3 . Select the menu Operations Supervision 3.2 Modifying the management states of a NE Stopping supervision [cont.NE Supervision 3 .4 Operation All rights reserved © 2006. select one or more sites and NEs 2. Alcatel 3FL41020ACAAWBZZA Edition 1.29 1. Click Close Alcatel 1353NM Alcatel 1353NM rel.Module 1 . In the network topology view.1 . 7. 1 .30 Aborting supervision stops management of the selected NE deactivates alarm collection and configurations NM immediately close the management session without collecting PM data from NE faster than "stop supervision“ 1.NE Supervision 3 . Alcatel 3FL41020ACAAWBZZA Edition 1. 7.00 Section 3 . select one or more sites and NEs 2.Module 1 . Click Operations Supervision Abort Supervision OK Alcatel 1353NM Alcatel 1353NM rel. Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006. In the network topology view.2 Modifying the management states of a NE Aborting supervision System Operation . Select the menu 3.Page 30 . For the NEs not supporting this feature it is not possible to grant CT access while the 1353NM is supervising the equipment All rights reserved © 2006.2 Modifying the management states of a NE Enabling/disabling NE operation access: Q3 and SNMP NE System Operation .00 Section 3 .: Some SNMP NEs do not support this feature.1 . Select the menu Operations Access State OS (CT denied) Local (CT granted) or 3.Page 31 . Click OK 4. Alcatel 3FL41020ACAAWBZZA Edition 1. it is always possible to manage them individually.31 Access granted Configuration of the NE managed from a craft terminal only The OS continues to receive and process alarms and performance data The OS can switch back to the OS access state (access denied) Access denied NE managed by the OS only IN THE NETWORK TOPOLOGY VIEW 1.B.Module 1 .NE Supervision 3 .4 Operation All rights reserved © 2006. Wait for the “Local Access” icon in the equipment view to be updated: Green colour for “CT denied” Light blue colour for “CT granted” Alcatel 1353NM Alcatel 1353NM rel. 7. N. Nevertheless. Select one or more sites and NEs 2. Alcatel When a “Host NE” (OMSN containing ISA board(s) in its submap) is selected. the “Local Access” is managed simultaneously for the OMSN and the ISA board(s) at the same time. Select the menu Supervision Access State OS (CT denied) or Local (CT granted) 2.e.Module 1 . Wait for the “Local Access” icon in the equipment view to be updated: Light blue colour for “CT denied” White colour during the checking of the OS isolation. Confirm by clicking OK (check OS isolation) 3.NE Supervision 3 . when requested by the CT.. Select the menu Supervision Access State OS (CT denied) Requested or 2.32 IN THE EQUIPMENT VIEW FROM 1353NM 1. Confirm by clicking OK 3.Page 32 .2 Modifying the management states of a NE Enabling/disabling NE operation access: Q3 and SNMP NE [Cont.] System Operation . the access status can become “CT granted” only if the OS is isolated) Alcatel 1353NM Alcatel 1353NM rel. Wait for the “Local Access” icon in the equipment view to be updated: Green colour for “CT denied” Light blue colour for “CT granted” IN THE EQUIPMENT VIEW FROM 1320CT 1. Alcatel All rights reserved © 2006. light blue if it is reachable (i. 7.4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. After that.1 . it turns green if the OS is isolated.00 Section 3 . the Access State management is separately applied to the Q3 or to the SNMP agent IN THE NETWORK TOPOLOGY VIEW: Only the Access State of the Q3 management domain is impacted 1.2 Modifying the management states of a NE Enabling/disabling NE operation access: 1850TSS-320 MSPP NE System Operation .Page 33 . Alcatel All rights reserved © 2006. Wait for the “Local Access” icon in the equipment view to be updated: Green colour for “CT denied” Light blue colour for “CT granted” Alcatel 1353NM Alcatel 1353NM rel. Select the menu Operations Access State OS (CT denied) Local (CT granted) or 3. Click OK 4. Alcatel 3FL41020ACAAWBZZA Edition 1. 7.NE Supervision 3 . Select one or more sites and NEs 2.Module 1 .1 .4 Operation All rights reserved © 2006.33 Due to the dual management domain of the 1850TSS-320 MSPP NEs.00 Section 3 . NE Supervision 3 . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 3 . Wait for the “Local Access” icon in the equipment view to be updated: Green colour for “CT denied” Light blue colour for “CT granted” SNMP management domain: 1. Select the menu Access State OS (CT denied) or Granted (CT granted) 3. Wait for the “Local Access” icon in the equipment view to be updated: (same behaviour as for the Q3 management domain) Alcatel 1353NM Alcatel 1353NM rel. Alcatel Supervision All rights reserved © 2006.2 Modifying the management states of a NE Enabling/disabling NE operation access: 1850TSS-320 MSPP NE [Cont.Page 34 . Data Board Navigation From the Data Management window.34 IN THE EQUIPMENT VIEW FROM 1353NM Q3 management domain: 1. Select the menu Equipment 2.] System Operation . Confirm by clicking OK 3. Select the PP20G card (data processor).1 . 7.Module 1 .4 Operation All rights reserved © 2006. Select the menu Supervision Access State OS (CT denied) or Local (CT granted) 2. After that.Module 1 . Select the menu Equipment 2. 7.] System Operation .4 Operation All rights reserved © 2006. light blue if it is reachable (i. when requested by the CT.1 . it turns green if the OS is isolated.Page 35 . Wait for the “Local Access” icon in the equipment view to be updated: Light blue colour for “CT denied” White colour during the checking of the OS isolation. the access status can become “CT granted” only if the OS is isolated) SNMP management domain: 1. Wait for the “Local Access” icon in the equipment view to be updated: (same behaviour as for the Q3 management domain) Alcatel 1353NM Alcatel 1353NM rel.e. Select the menu Supervision Access State OS (CT denied) or Requested 2. Confirm by clicking OK (check OS isolation) 3.NE Supervision 3 . Alcatel 3FL41020ACAAWBZZA Edition 1.2 Modifying the management states of a NE Enabling/disabling NE operation access: 1850TSS-320 MSPP NE [Cont.35 IN THE EQUIPMENT VIEW FROM 1320CT Q3 management domain: 1.. Data Board Navigation From the Data Management window. Select the menu Access State OS (CT denied) Requested or 3.00 Section 3 . Alcatel Supervision All rights reserved © 2006. Select the PP20G card (data processor). Page 36 .4 Operation All rights reserved © 2006. Alcatel This page is left blank intentionally All rights reserved © 2006.Blank Page System Operation . 7.Module 1 .00 Section 3 .NE Supervision 3-1- 36 Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel 3FL41020ACAAWBZZA Edition 1.2 Modifying the management states of a NE Exercise System Operation .37 Start supervision of a Q3 or SNMP NE by alignment up Allow local access to this NE Stop supervision on this NE Start supervision of a 1850TSS-320 MSPP NE Allow local access to the Q3 agent of this NE Allow local access to the SNMP agent of this NE Stop supervision on this NE Alcatel 1353NM Alcatel 1353NM rel. Alcatel All rights reserved © 2006.00 Section 3 .1 . 7.Page 37 .Module 1 .4 Operation All rights reserved © 2006.NE Supervision 3 . 00 Section 3 .Page 38 .4 Operation All rights reserved © 2006. 7. Alcatel This page is left blank intentionally All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.NE Supervision 3-1- 38 Alcatel 1353NM Alcatel 1353NM rel.Blank Page System Operation .Module 1 . 7. Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006.1 .Page 39 . Alcatel 3FL41020ACAAWBZZA Edition 1.System Operation .NE Supervision 3 .00 Section 3 .Module 1 .39 3 Simulator Alcatel 1353NM Alcatel 1353NM rel. NE Supervision 3 .40 RM TSD-IM PNM PNM PNM-IM Q3 EML-IM BD BD USM USM USM USM TSD-IM AS DB DB AS-IM TSD-IM NEs IDs NE NE simulator simulator DB DB ST ED T AR TSD-IM NE NE DB DB Alcatel 1353NM Alcatel 1353NM rel. 7.Module 1 .4 Operation All rights reserved © 2006.3 NE simulator Principles System Operation .Page 40 . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 3 . Alcatel All rights reserved © 2006.1 . 1 . The NE simulator is started up (and stopped) manually by the 1353NM operator.00 Section 3 . Alcatel The NE simulator is NE software which runs on the 1353NM. All rights reserved © 2006.Page 41 . off-line configuration restoration of the NE MIB The simulator can be started only if the NE is in the "OS isolation" state Alcatel 1353NM Alcatel 1353NM rel. The availability of the NE simulator depends on the type and version of the NE.3 NE simulator Principles [cont. but never on both The NE simulator is used in cases of : DCN failure: the NE simulator is the only way for the 1353NM operator to look up the NE's configuration (the configuration stored at the time of the last backup). Alcatel 3FL41020ACAAWBZZA Edition 1.41 Work on an NE or on the NE simulator.NE Supervision 3 .4 Operation All rights reserved © 2006.] System Operation . The system never automatically starts or stops the NE simulator.Module 1 . 7. 00 Section 3 .4 Operation All rights reserved © 2006.Module 1 .42 1353NM Simulator simulator MIB Simulator Align up NE Q3 Simulator Align down Not active MIB active MIB activate In default configuration. the Simulator can be started only once at a time on a given 1353NM Alcatel 1353NM Alcatel 1353NM rel. 7.Page 42 .NE Supervision 3 . Alcatel Align up Activate menu Supervision Simulator Simulator Simulator Align up Align down Activate Align down menu Supervision menu Supervision All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.3 NE simulator Simulator and MIBs System Operation .1 . Alcatel 3FL41020ACAAWBZZA Edition 1.NE Supervision 3 .Module 1 .4 Operation All rights reserved © 2006.00 Section 3 . 7.1 . Alcatel All rights reserved © 2006.43 IN THE EQUIPMENT VIEW Align the configuration of the real NE with the simulator menu : Supervision Simulator Align up Alcatel 1353NM Alcatel 1353NM rel.3 NE simulator Loading the simulator with a configuration System Operation .Page 43 . 4 Operation All rights reserved © 2006. Note 2 Caution: If you stop the equipment supervision in order to use the simulator. 7.Module 1 . 6.00 Section 3 .Page 44 . Alcatel Note 1 Steps #1 and #2 have to be done when the NE is already supervised. menu : Supervision 3. Stop the simulator. menu : Supervision 8. Simulator Simulator Start Stop Start supervision (changes done in the simulator don't appear) 7. All rights reserved © 2006. note that the “OS isolation” state switch will occur after a few minutes.NE Supervision 3 .1 . Stop supervision of NE (Note 2) 1. In this last case. menu : Supervision Modify the configuration 5. Alcatel 3FL41020ACAAWBZZA Edition 1.44 Load NE configuration in the simulator (Note 1) 2. steps #6 up to #8 will be done as soon as possible. Simulator Align down Activate the new configuration menu : Supervision Simulator Activate wait for communication to be re-established following "OS Isolation" Alcatel 1353NM Alcatel 1353NM rel. start from step #3. FOR A NOT SUPERVISED EQUIPMENT VIEW: Start the simulator. If the NE cannot be supervised.3 NE simulator Configuration off-line System Operation . Align the simulator's MIB down to the NE. 4. menu : Supervision 2.Page 45 .1 . Start the simulator.00 Section 3 .45 FOR A SUPERVISED EQUIPMENT VIEW in OS ISOLATION state: 1.4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 .NE Supervision 3 . 7.3 NE simulator Off-line browsing System Operation . Alcatel All rights reserved © 2006. Stop the simulator. Display the configuration Simulator Start last known configuration last NE alarm state 3. menu : Supervision Simulator Stop Alcatel 1353NM Alcatel 1353NM rel. Alcatel This page is left blank intentionally All rights reserved © 2006.Module 1 .Blank Page System Operation .00 Section 3 .Page 46 .4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. 7.NE Supervision 3-1- 46 Alcatel 1353NM Alcatel 1353NM rel. 00 Section 3 . Alcatel All rights reserved © 2006.47 Display the on board simulator state window Align up the supervised NE in the simulator Activate the off-line configuration Add a board Restart NE supervision and activate the modifications made in the simulator Restore the NE's original configuration Alcatel 1353NM Alcatel 1353NM rel.Module 1 . Alcatel 3FL41020ACAAWBZZA Edition 1.1 .Page 47 . 7.4 Operation All rights reserved © 2006.3 NE simulator Exercise System Operation .NE Supervision 3 . 00 Section 3 . 7.4 Operation All rights reserved © 2006.Blank Page System Operation . Alcatel This page is left blank intentionally All rights reserved © 2006.NE Supervision 3-1- 48 Alcatel 1353NM Alcatel 1353NM rel.Page 48 .Module 1 . Alcatel 3FL41020ACAAWBZZA Edition 1. 00 Section 3 .49 4 Schedule a MIB Backup Alcatel 1353NM Alcatel 1353NM rel. 7. Alcatel All rights reserved © 2006.NE Supervision 3 .1 .Module 1 .Page 49 . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.System Operation . .1 . but then there is no way to restore it All rights reserved © 2006.4 Operation All rights reserved © 2006. From network view: 2. the « Simulator must be issued to the NE. In order to restore a MIB backed-up with the FT scheduler.Page 50 . Align down » command Therefore.NE Supervision 3 . Alcatel The FT Scheduler can also be started from: TMN-OS Window: issue Actions 1353NM Admin NE Administration FT Scheduler The FT Scheduler updates the MIB configuration in the simulator.00 Section 3 . Alcatel 3FL41020ACAAWBZZA Edition 1.50 1. scheduling a MIB backup makes sense only for those NEs that support the simulator. 7.Module 1 . the MIB backup can be scheduled. If the NE doesn’t support the simulator. Operations FT Scheduler Select Job New Alcatel 1353NM Alcatel 1353NM rel.4 Schedule a MIB backup Schedule a MIB backup System Operation . 4 Schedule a MIB backup Schedule a MIB backup [cont. Do you want a backup Job ?" 5.4 Operation All rights reserved © 2006.] System Operation .00 Section 3 . 7. Click on the right arrow and answer "yes" to the question "A job may be for SWDL or backup.1 .51 3 3.Page 51 . Alcatel All rights reserved © 2006. Enter a "Job name" and "information“ (optional) 5 4 4.NE Supervision 3 .Module 1 . Set activation date and time Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1. select the parameter "misalignment flag" 9. Select the NE and enter NE details for MIB backup 8. Submit your job with the "submit" button 11.00 Section 3 . Alcatel In the « Save as » window.1 . Save your job with the "save" button 10.4 Operation All rights reserved © 2006. All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. Select the backup session then click on the right arrow to create a NE 7.Page 52 .NE Supervision 3 .4 Schedule a MIB backup Schedule a MIB backup [cont. If required.Module 1 .] System Operation . write the job name in the bottom line The parameter "misalignment flag“ is used to avoid the NE Configuration upload towards the Simulator when the two entities are already aligned. Click on “yes” if you want to see the status of the running job 7 6 8 9 10 11 Alcatel 1353NM Alcatel 1353NM rel. 7.52 6. NE Supervision 3 .53 To see the status of the running job.4 Operation All rights reserved © 2006. the user can also select menu Job Show backup running job… on the File Transfer Scheduler To see the result of backup. select menu Job View backup report Alcatel 1353NM Alcatel 1353NM rel. 7.4 Schedule a MIB backup Monitor MIB backup schedule System Operation . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 3 .Page 53 .Module 1 .1 . Alcatel All rights reserved © 2006. NE Supervision 3-1- 54 Alcatel 1353NM Alcatel 1353NM rel.Page 54 .4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. 7.00 Section 3 . Alcatel This page is left blank intentionally All rights reserved © 2006.Module 1 .Blank Page System Operation . Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006. 7.1 .Page 55 .00 Section 3 .55 Schedule a MIB backup for two NEs Alcatel 1353NM Alcatel 1353NM rel.4 Schedule a MIB backup How to do it System Operation .Module 1 . Alcatel 3FL41020ACAAWBZZA Edition 1.NE Supervision 3 . NE Supervision 3 .4 Schedule a MIB backup Exercise System Operation .56 Schedule a MIB backup for one NE Display the status while job is running Display the report Alcatel 1353NM Alcatel 1353NM rel.00 Section 3 .4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. 7.1 .Page 56 . Alcatel All rights reserved © 2006.Module 1 . Module 1 .4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.NE Supervision 3 .Page 57 . 7.1 .System Operation .00 Section 3 .57 5 Backing-up/Restoring the MIB Alcatel 1353NM Alcatel 1353NM rel. 4 Operation With Q3 NE.Page 58 .1 .NE Supervision 3 .5 Backing up/Restoring the MIB Principle System Operation . Alcatel Alcatel 1353NM Alcatel 1353NM rel. 7.Module 1 . Alcatel 3FL41020ACAAWBZZA Edition 1. 1353NM modification file backup restore NE Q3 active MIB Not active activate MIB All rights reserved © 2006. modifications from 1353NM (or 1320CT) are performed directly on the NE MIB.00 Section 3 .58 Warning : THIS FUNCTION IS AVAILABLE ONLY FOR Q3 AND SNMP EQUIPMENTS WHICH HAVE NO SIMULATOR INTO THE 1353NM SYSTEM. The backup can be performed before any change to the NE. All rights reserved © 2006. so that the previous configuration can be restored quickly. 59 Q3 and 1850TSS-320 MSPP NEs: 1.5 Backing up/Restoring the MIB Backing up the configuration System Operation . 7.00 Section 3 .4 Operation All rights reserved © 2006. select the menu Download 3. Click MIB management 2. In Equipment view.NE Supervision 3 . so please refer to the Operator Handbooks and to the Training Manuals of each single NE family Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.1 .Module 1 . Enter a name for the backup Backup and confirm with OK wait for the message backup successfully completed! to be displayed SNMP NEs: The commands and associated menus to be selected into the equipment view are specific for each single NEs.Page 59 . Alcatel All rights reserved © 2006. Select the backup to be restored 3.5 Backing up/Restoring the MIB Restoring the configuration System Operation . so please refer to the Operator Handbooks and to the Training Manuals of each single NE family Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006.00 Section 3 .NE Supervision 3 . select the menu Download MIB management 2. Click Activate and confirm SNMP NEs: The commands and associated menus to be selected into the equipment view are specific for each single NEs. 7.1 . In Equipment view.Page 60 .60 Q3 and 1850TSS-320 MSPP NEs: 1.Module 1 . Click Restore wait for the message to be displayed Restore completed 4. Alcatel 3FL41020ACAAWBZZA Edition 1.Page 61 .5 Backing up/Restoring the MIB How to do it System Operation .1 .61 How to perform a backup and a restore Alcatel 1353NM Alcatel 1353NM rel. 7.00 Section 3 .4 Operation All rights reserved © 2006.NE Supervision 3 .Module 1 . Alcatel All rights reserved © 2006. NE Supervision 3 .5 Backing up/Restoring the MIB Exercise System Operation .00 Section 3 .Page 62 .1 .62 Perform a backup Modify an element of the configuration (for example.Module 1 . 7.4 Operation All rights reserved © 2006. add a board) Perform a restore Check that the change made previously has been overwritten by rewriting Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006. 7. Alcatel This page is left blank intentionally All rights reserved © 2006.00 Section 3 .Page 63 .Blank Page System Operation .NE Supervision 3-1- 63 Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 . 4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.System Operation .00 Section 3 .Page 64 .Module 1 .1 . 7. Alcatel All rights reserved © 2006.64 End of Module NE Supervision Alcatel 1353NM Alcatel 1353NM rel.NE Supervision 3 . 00 Section 3 . Alcatel All rights reserved © 2006.00 Alcatel 1353NM .Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006.Module 2 .Section 3 System Operation Module 2 NE Management 3FL41020ACAAWBZZA Edition 1. Alcatel 3FL41020ACAAWBZZA Edition 1.Page 1 . 00 Section 3 .Page 2 . 7.Module 2 . Alcatel This page is left blank intentionally Document History Edition 01 Date 2007-02-07 Author Sangalli Roberto Remarks First edition All rights reserved © 2006.Blank Page System Operation .NE Management 3-2-2 Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. 7. 1850TSS MSPP and SNMP NE Alcatel 1353NM Alcatel 1353NM rel. Alcatel All rights reserved © 2006.Module 2 .Page 3 .00 Section 3 .4 Operation All rights reserved © 2006.NE Management 3-2-3 Objective: to be able to perform the basic management operations on Q3.Objectives System Operation . 4 Operation All rights reserved © 2006. 7. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel This page is left blank intentionally All rights reserved © 2006.Objectives [cont.00 Section 3 .] System Operation .NE Management 3-2-4 Alcatel 1353NM Alcatel 1353NM rel.Module 2 .Page 4 . Alcatel All rights reserved © 2006.Module 2 . 7.4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.Table of Contents System Operation .Page 5 .00 Section 3 .NE Management 3-2-5 Switch to notes view! 1 2 3 4 5 6 NE Time Management from the 1353NM Performing a Remote Inventory Resetting a NE Downloading Software to the NE List Abnormal Conditions Event Log Archiving Page 7 13 23 27 47 53 Alcatel 1353NM Alcatel 1353NM rel. 7.Table of Contents [cont.4 Operation This page is left blank intentionally All rights reserved © 2006.00 Section 3 .] System Operation .Module 2 . Alcatel All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.Page 6 .NE Management 3-2-6 Switch to notes view! Alcatel 1353NM Alcatel 1353NM rel. 00 Section 3 .4 Operation All rights reserved © 2006.Page 7 .NE Management 3-2-7 1 NE Time Management from the 1353NM Alcatel 1353NM Alcatel 1353NM rel. Alcatel All rights reserved © 2006. 7.System Operation . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 2 . Module 2 . click Close 4. The NE's local time can be displayed and/or configured. Alcatel All rights reserved © 2006. To align the time of the NE on the OS time. Select the menu Configuration 1. click "Set" 3.4 Operation All rights reserved © 2006.00 Section 3 .Page 8 .1 NE time management from the 1353NM NE and OS date and time System Operation . Alcatel 1353NM Alcatel 1353NM rel.NE Management 3-2-8 The system realigns the time of all the NEs supervised by default every 24 hours. NE Time If the time does not need to be modified. 2. Open the equipment view of a NE. Alcatel 3FL41020ACAAWBZZA Edition 1. 7. a message is displayed: Alcatel 1353NM Alcatel 1353NM rel. select the relevant NEs 2.NE Management 3-2-9 This action is used by an user to display time and date of a number of NEs.Module 2 . Select: Operations Time 1. Get 3. Click Apply "Working" (until the response from the NE to the GET request has been received) NE date and time (when the response from the NE has been received (and is correct) For each NE. In the network view. Alcatel 3FL41020ACAAWBZZA Edition 1. its access state is DENIED and its operational state is ENABLED.4 Operation All rights reserved © 2006.Page 9 .1 NE time management from the 1353NM Getting the NE time System Operation . All rights reserved © 2006. Alcatel This operation is allowed only if the NE is under supervision. 7.00 Section 3 . 7. 3. 2. If the NE has the NTP protocol enabled. Alcatel 3FL41020ACAAWBZZA Edition 1. select the relevant NEs Select the menu: Operations Time Set Click OK Each selected NE sends a response to the setting request Date and time values if the request has been executed correctly.Module 2 . In the network view.4 Operation All rights reserved © 2006.10 You use this action to send the OS time and date to a number of NEs.NE Management 3 . the “Set time” procedure from NM will fail Alcatel 1353NM Alcatel 1353NM rel. if a problem has occurred. “Processing failure with args“.Page 10 . 1. Alcatel All rights reserved © 2006.1 NE time management from the 1353NM Setting NE time System Operation .00 Section 3 .2 . 7.1 NE time management from the 1353NM Exercise System Operation .NE Management 3 .Module 2 . Alcatel All rights reserved © 2006.11 Set the time (on the OS time) for an NE Display the time of the NEs in a domain Set the time (on the OS time) for a selection of NEs on the map Alcatel 1353NM Alcatel 1353NM rel.2 .00 Section 3 . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.Page 11 . 00 Section 3 .Blank Page System Operation . Alcatel This page is left blank intentionally All rights reserved © 2006.Page 12 . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 2 .4 Operation All rights reserved © 2006.NE Management 3-2- 12 Alcatel 1353NM Alcatel 1353NM rel. 7. 7.Page 13 .Module 2 . Alcatel All rights reserved © 2006.13 2 Performing a Remote Inventory Alcatel 1353NM Alcatel 1353NM rel.2 .00 Section 3 .NE Management 3 . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.System Operation . ). (e..4 Operation All rights reserved © 2006.U. Alcatel ALCATEL company Identifier: This field contains the abbreviation of the company using 4 characters (uppercase).. Factory number: It identifies the manufacturing plant within the company. gives information about the type (function) performed by the R.00 Section 3 . ATEL .U. it is filled with 10 characters. All rights reserved © 2006. lot 03 date of customer delivery 04 date of customer order Date: Date format: YYMMDD.U. The customer data are loaded into the EEPROM during the manufacturing process only.2 Performing a remote inventory Remote Inventory content System Operation .U. When this field is not used.U. This number includes the ICS at the end. R. ASEL .: The mnemonic of the R.Module 2 .14 ALCATEL company Identifier Mnemonic of the R. The following codes are standardised: 00 manufacturing date which corresponds to the end of the test phase 01 date of the manufacturing order 02 date of manufacturing R . It is an Alcatel code to identify the resident software of the R. Software part number: The Software Part Number is the Alcatel identifier of the resident software supported by the R.U. type (in the current year) Date identifier: The date identifier specifies the meaning of the date field. Unit serial number: This number specifies the manufacturing chronological number of this R.U.U. Unit part number Software part number CLEI code Factory number Unit serial number Date identifier Date R. inventory field for the customer: This field is reserved for the customer inventory information. This mnemonic is suggested to be identical to the printed name on the front panel of the unit. 4 characters to be used. STM1 I/O .NE Management 3 .2 .U. 7. inventory field for the customer Alcatel 1353NM Alcatel 1353NM rel.g. When the year only is defined the field shall be encoded as “YY----“.Page 14 . Unit part number: The Unit Part Number is the Alcatel code to identify the R. considered as a single piece.U.. ALCL Mnemonic of the R. MATRIX ..U. Alcatel 3FL41020ACAAWBZZA Edition 1. CLEI code: CLEI Code is specified in Bellcore recommendations. For instance: ACIT . 7.NE Management 3 . select menu Supervision 2) Wait for completion message 3) To display the result. Click on Apply and wait for completion message 4. From the Remote Inventory display window. select menu Operations Display Remote Inventory 5. Upload Remote Inventory 3.15 To perform this remote inventory From PNM.00 Section 3 . To display the result.Page 15 . Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel This action can also be undertake from equipment view 1) In equipment view.2 Performing a remote inventory For the NE whole subrack System Operation . select the NE 2.2 . Select menu Operations 1. select menu Diagnosis Upload Remote Inventory View Remote Inventory All rights reserved © 2006.Module 2 . select File Print to print the Remote Inventory file Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006. In equipment view.16 To perform this remote inventory 1. select a board in the NE Select menu Equipment Remote Inventory Board Level Alcatel 1353NM Alcatel 1353NM rel. Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006.Page 16 .NE Management 3 . 2. Alcatel 3FL41020ACAAWBZZA Edition 1.2 .00 Section 3 .2 Performing a remote inventory For a single NE board: Q3 or 1850TSS-320 MSPP NE System Operation . 7.Module 2 . 7.2 . Alcatel All rights reserved © 2006.NE Management 3 .00 Section 3 .Page 17 .2 Performing a remote inventory For a single NE board: SNMP NE System Operation .17 The commands and associated menus to be selected into the equipment view are specific for each single NEs.Module 2 .4 Operation All rights reserved © 2006. so please refer to the Operator Handbooks and to the Training Manuals of each single NE family Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel This operation is not possible in case of SNMP NE All rights reserved © 2006.Page 18 . Choice printer or file for the output 4.2 .2 Performing a remote inventory Remote inventory to printer or file System Operation . select the destination file and data format 5. Click OK Alcatel 1353NM Alcatel 1353NM rel.18 1. 7. Select menu Equipment Remote Inventory Subrack Level 3.00 Section 3 .Module 2 . select a board in the NE 2. In equipment view.4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.NE Management 3 . If you choose file. Click on the “magic wand” to upload the R.00 Section 3 . Alcatel 3FL41020ACAAWBZZA Edition 1.19 To perform this Remote Inventory from PNM 1.I.4 Operation All rights reserved © 2006. Select Operations Remote Inventory Wizard 2. Click on “Search RI” button 2 3 4 Alcatel 1353NM Alcatel 1353NM rel. Select the relevant NE(s) 3. 7.2 Performing a remote inventory Remote inventory on the whole network System Operation .Module 2 .Page 19 . 4. Alcatel This function allows to search for boards of a given type deployed in the network All rights reserved © 2006.NE Management 3 .2 . Search 5.20 6.NE Management 3 . 7.] System Operation . Alcatel 3FL41020ACAAWBZZA Edition 1. Optionally. Results are displayed in this area 8. enter the NE Family and/or NE Type Clicking on the arrow opens the USM view of the relevant equipment 7. Enter the Unit type or part number 7. Close Alcatel 1353NM Alcatel 1353NM rel.2 Performing a remote inventory Remote inventory on the whole network [cont. Alcatel All rights reserved © 2006.Page 20 .Module 2 .2 .00 Section 3 .4 Operation All rights reserved © 2006. 2 Performing a remote inventory Exercise System Operation . Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006.NE Management 3 . 7.2 .Module 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.21 Perform a NE subrack remote inventory from the MAP Perform a remote inventory for a board Search for a given board in the network (for example CONGI) Alcatel 1353NM Alcatel 1353NM rel.Page 21 .00 Section 3 . Blank Page System Operation . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006. 7.00 Section 3 .Module 2 .Page 22 . Alcatel This page is left blank intentionally All rights reserved © 2006.NE Management 3-2- 22 Alcatel 1353NM Alcatel 1353NM rel. 00 Section 3 . Alcatel All rights reserved © 2006.2 . Alcatel 3FL41020ACAAWBZZA Edition 1.Page 23 .23 3 Resetting a NE Alcatel 1353NM Alcatel 1353NM rel.Module 2 .System Operation . 7.NE Management 3 .4 Operation All rights reserved © 2006. shuts down and restarts all the processes currently running on the NE Traffic is unaffected.NE Management 3 . This operation resets.3 Resetting a NE System Operation . 2.24 An NE reset may be necessary in certain failure situations. Alcatel All rights reserved © 2006. 1.00 Section 3 .Page 24 . Alcatel 1353NM Alcatel 1353NM rel. Select the menu: Supervision Restart NE 3.4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. 7. Open the NE's equipment view.2 .Module 2 . Communication between the NE and the OS is lost for a few minutes. 25 Perform an NE reset Alcatel 1353NM Alcatel 1353NM rel.NE Management 3 . Alcatel All rights reserved © 2006.Module 2 .2 .3 Resetting a NE Exercise System Operation . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.00 Section 3 .Page 25 . 7. Alcatel This page is left blank intentionally All rights reserved © 2006. 7.00 Section 3 .Page 26 .NE Management 3-2- 26 Alcatel 1353NM Alcatel 1353NM rel.Module 2 .Blank Page System Operation . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006. Page 27 . Alcatel All rights reserved © 2006.00 Section 3 .System Operation .4 Operation All rights reserved © 2006.2 .27 4 Downloading Software to the NE Alcatel 1353NM Alcatel 1353NM rel. 7.Module 2 .NE Management 3 . Alcatel 3FL41020ACAAWBZZA Edition 1. .2 .. Select "local” (local server is being automatically chosen) 3.4 Operation All rights reserved © 2006. select the menu Download Server management. Alcatel 3FL41020ACAAWBZZA Edition 1. 7.4 Downloading software to the NE Set server name (Q3 and 1850TSS-320 MSPP NEs) System Operation . Click "Close" Alcatel 1353NM Alcatel 1353NM rel. 2.00 Section 3 . In EMLUSM.Page 28 .Module 2 .NE Management 3 .28 1. Alcatel All rights reserved © 2006. so please refer to the Operator Handbooks and to the Training Manuals of each single NE family Alcatel 1353NM Alcatel 1353NM rel.2 .00 Section 3 . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.4 Downloading software to the NE Set server name (SNMP NEs) System Operation . 7.Module 2 .Page 29 .NE Management 3 .29 The commands and associated menus to be selected into the equipment view are specific for each single NEs. Alcatel All rights reserved © 2006. 30 1.00 Section 3 .4 Operation All rights reserved © 2006. Select the SW Release to be downloaded 3. select the menu Download Init download 2. Alcatel 1353NM Alcatel 1353NM rel. In EMLUSM. significant improvement can be obtained in the Software download time (up to twenty time quicker than without DBO) All rights reserved © 2006. Alcatel Thanks to the file transfer Dynamic Bandwidth Optimization (DBO) feature implemented in the 1353NM Rel 7.Page 30 .Module 2 . 7.NE Management 3 . Click "OK" and confirm the download wait for the message "Software download completed!" to appear in the download window. Alcatel 3FL41020ACAAWBZZA Edition 1.2 .4 Downloading software to the NE Downloading (Q3 NEs) System Operation .4. Alcatel 1353NM Alcatel 1353NM rel. In EMLUSM. Select the SW Release and the Package (Transport. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006.00 Section 3 .4 Downloading software to the NE Downloading (1850TSS-320 MSPP NEs) System Operation .Module 2 .31 1.4 Operation All rights reserved © 2006.Page 31 .2 .NE Management 3 . Data or Multiservice) to be downloaded 3. select the menu Download Init download 2. Click "OK" and confirm the download wait for the message "Software download completed!" to appear in the download window. 7. 32 The commands and associated menus to be selected into the equipment view are specific for each single NEs. 7. so please refer to the Operator Handbooks and to the Training Manuals of each single NE family Alcatel 1353NM Alcatel 1353NM rel.Module 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.2 .4 Operation All rights reserved © 2006.00 Section 3 .NE Management 3 . Alcatel All rights reserved © 2006.4 Downloading software to the NE Downloading (SNMP NEs) System Operation .Page 32 . 2 . In EMLUSM.NE Management 3 . Alcatel 3FL41020ACAAWBZZA Edition 1.33 1...Page 33 .00 Section 3 .Module 2 . select the menu Download Units info. Alcatel All rights reserved © 2006. 7. select "Activate" 3.4 Downloading software to the NE Activating the new software (Q3 NEs) System Operation . Select the new software tab (Standby) In the action pull-down menu. Click "OK" and confirm wait for Q3 communication to be re-established (it may be necessary to restart EMLUSM) Alcatel 1353NM Alcatel 1353NM rel. SW Release installed 2.4 Operation All rights reserved © 2006. 34 1.NE Management 3 .00 Section 3 . select the menu Download Units info..Module 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006. Select the new software tab (Standby) In the action pull-down menu. Alcatel All rights reserved © 2006. Click "OK" and confirm wait for Q3 communication to be re-established (it may be necessary to restart EMLUSM) Alcatel 1353NM Alcatel 1353NM rel.4 Downloading software to the NE Activating the new software (1850TSS-320 MSPP NEs) System Operation .2 . select "Activate" 3. In EMLUSM..Page 34 . 7. SW Release installed 2. 7.35 The commands and associated menus to be selected into the equipment view are specific for each single NEs.4 Downloading software to the NE Activating the new software (SNMP NEs) System Operation . so please refer to the Operator Handbooks and to the Training Manuals of each single NE family Alcatel 1353NM Alcatel 1353NM rel.Page 35 .Module 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 3 .4 Operation All rights reserved © 2006.2 . Alcatel All rights reserved © 2006.NE Management 3 . Page 36 .Module 2 . Operations FT Scheduler Select Job New Alcatel 1353NM Alcatel 1353NM rel.NE Management 3 .4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.2 .4 Downloading software to the NE Schedule a SW Download System Operation . From network view: 2. 7. Alcatel The FT Scheduler can also be started from: TMN-OS Window: issue Actions 1353NM Admin NE Administration FT Scheduler All rights reserved © 2006.00 Section 3 ..36 1. 4 Operation All rights reserved © 2006.Page 37 . Alcatel All rights reserved © 2006. 7.] System Operation . Click on the right arrow and answer “no" to the question "A job may be for SWDL or backup.2 .00 Section 3 . Enter a "Job name" and "information“ (optional) 5 4 4. Do you want a backup Job ?" 5. Set activation date and time Alcatel 1353NM Alcatel 1353NM rel.4 Downloading software to the NE Schedule a SW Download [cont.Module 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.37 3 3.NE Management 3 . Select the SW package to download 10.2 . Select the session then click on the right arrow to create a NE 7. write the job name in the bottom line The parameter "misalignment flag“ is used to avoid the NE Configuration upload towards the Simulator when the two entities are already aligned. All rights reserved © 2006.] System Operation .Module 2 . Optionally. Alcatel In the « Save as » window. 7. Click on “yes” if you want to see the status of the running job 7 6 8 9 10 11 12 Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006.Page 38 . Save your job with the "save" button 11.38 6. Select the NE 8. select the server hosting the SW 9. Submit your job with the "submit" button 12.NE Management 3 . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Downloading software to the NE Schedule a SW Download [cont.00 Section 3 . NE Management 3 . Alcatel All rights reserved © 2006.4 Downloading software to the NE Schedule a SW Download [cont.00 Section 3 .2 . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.39 When dealing with a 1850TSS-320 NE. 7.] System Operation .Module 2 . at step 9 the operator must also choose the Package Type among: 1850TSS320D (Full Data Configuration) 1850TSS320M (MSPP Configuration) 1850TSS320T (PTRP Configuration) Alcatel 1353NM Alcatel 1353NM rel.Page 39 . select menu Job View SWDL report Alcatel 1353NM Alcatel 1353NM rel.2 .4 Operation All rights reserved © 2006.NE Management 3 .4 Downloading software to the NE Monitor SW Download schedule System Operation . Alcatel All rights reserved © 2006.00 Section 3 .Module 2 . the user can also select menu Job Show SWDL running job… on the File Transfer Scheduler To see the result of backup. 7.Page 40 . Alcatel 3FL41020ACAAWBZZA Edition 1.40 To see the status of the running job. Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 3 . 1.41 The user can stop a scheduled SW download on a single NE or on a group of NEs. 7. Select the relevant NE(s) 2.Page 41 .Module 2 .4 Downloading software to the NE Stop a running job System Operation . Click on Abort 3.2 . Confirm clicking on Yes 1 2 3 Alcatel 1353NM Alcatel 1353NM rel. Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006.NE Management 3 . Module 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.42 In order to see the SW status of the managed NEs: 1. Alcatel All rights reserved © 2006.Page 42 . 7. issue the menu SW Status 2.00 Section 3 . on the File Transfer Scheduler.4 Downloading software to the NE See the SW status of the managed NEs System Operation .2 .NE Management 3 . select the NE by: NE Type NE Name All NEs The list of NE SW status can be exported in a text file Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006. 4 Operation All rights reserved © 2006.4 Downloading software to the NE See the SW status of the managed NEs: details System Operation .NE Management 3 . Alcatel All rights reserved © 2006. 7. Alcatel 3FL41020ACAAWBZZA Edition 1. double click on the desired NE Click here to get SW status details Select the action and then “Apply Action” Alcatel 1353NM Alcatel 1353NM rel.00 Section 3 .43 To get SW status details or to perform actions.2 .Page 43 .Module 2 . 00 Section 3 . Alcatel 3FL41020ACAAWBZZA Edition 1.Page 44 .Blank Page System Operation . 7.Module 2 .4 Operation All rights reserved © 2006. Alcatel This page is left blank intentionally All rights reserved © 2006.NE Management 3-2- 44 Alcatel 1353NM Alcatel 1353NM rel. 4 Operation All rights reserved © 2006.45 Download software to the NE CAUTION: the download may take some time Alcatel 1353NM Alcatel 1353NM rel. significant improvement can be obtained in the Software download time (up to twenty time quicker than without DBO) All rights reserved © 2006.Module 2 .4 Downloading software to the NE Exercise System Operation . Alcatel Thanks to the file transfer Dynamic Bandwidth Optimization (DBO) feature implemented in the 1353NM Rel 7.Page 45 .00 Section 3 .4. Alcatel 3FL41020ACAAWBZZA Edition 1.NE Management 3 .2 . 7. NE Management 3-2- 46 Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.Blank Page System Operation . Alcatel This page is left blank intentionally All rights reserved © 2006.Module 2 . 7.Page 46 .00 Section 3 . Module 2 .00 Section 3 .System Operation .Page 47 .47 5 List Abnormal Conditions Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006.NE Management 3 .2 . 7. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006. Alcatel AC information are retrieved from EMLIM every 15 minutes Automatic refreshment period can be set-up from menu Option Set Automatic refresh All rights reserved © 2006.Navigate using USM on the selected NE All rights reserved © 2006.Select AC viewer from PMN 2.4 Operation 3.00 Section 3 . 7.2 . Alcatel 3FL41020ACAAWBZZA Edition 1.Page 48 .NE Management 3 .5 List Abnormal conditions List NEs in abnormal condition System Operation .48 1.Eventually select the involved NE(s) Refresh the NE list in the window Alcatel 1353NM Alcatel 1353NM rel.Module 2 . Select menu Diagnosis Abnormal Condition List 3.Page 49 .Module 2 . Alcatel All rights reserved © 2006. Alcatel 1353NM Alcatel 1353NM rel.00 Section 3 . Alcatel 3FL41020ACAAWBZZA Edition 1. Open equipment view (EMLUSM) 2.4 Operation All rights reserved © 2006.5 List Abnormal conditions Display abnormal condition list for one NE (Q3 and 1850TSS-320 MSPP) System Operation .49 1. it is possible to double click on one item to navigate in the USM view with the corresponding AC.NE Management 3 . In the AC List window. 7.2 . Module 2 . so please refer to the Operator Handbooks and to the Training Manuals of each single NE family Alcatel 1353NM Alcatel 1353NM rel.5 List Abnormal conditions Display abnormal condition list for one NE (SNMP NE) System Operation .50 The commands and associated menus to be selected into the equipment view are specific for each single NEs.4 Operation All rights reserved © 2006.00 Section 3 . 7. Alcatel All rights reserved © 2006.2 .NE Management 3 . Alcatel 3FL41020ACAAWBZZA Edition 1.Page 50 . NE Management 3 .4 Operation All rights reserved © 2006.Module 2 .5 List Abnormal conditions Exercise System Operation .51 Create an AC on a NE (for example a loop) Display NEs in Abnormal condition status Display the list of AC for this NE Suppress the AC Alcatel 1353NM Alcatel 1353NM rel. 7.2 . Alcatel All rights reserved © 2006.Page 51 .00 Section 3 . Alcatel 3FL41020ACAAWBZZA Edition 1. NE Management 3-2- 52 Alcatel 1353NM Alcatel 1353NM rel.Blank Page System Operation . Alcatel This page is left blank intentionally All rights reserved © 2006. 7.Module 2 .00 Section 3 .Page 52 . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006. Module 2 .4 Operation All rights reserved © 2006.00 Section 3 . Alcatel All rights reserved © 2006. 7.NE Management 3 .System Operation . Alcatel 3FL41020ACAAWBZZA Edition 1.2 .53 6 Event Log Archiving Alcatel 1353NM Alcatel 1353NM rel.Page 53 . Page 54 .00 Section 3 .Module 2 .NE Management 3 .54 By the EMLUSM. Alcatel 3FL41020ACAAWBZZA Edition 1. the user has the possibility to browse the event log stored in the MIB of that single NE by issuing the command: Diagnosis Log Browsing Event Log Alcatel 1353NM Alcatel 1353NM rel.2 .6 Event Log Archiving Q3 Event Log Browsing System Operation . Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006. 7. 55 The event records can be filtered by the user per type and time: Alcatel 1353NM Alcatel 1353NM rel.Page 55 .Module 2 . Alcatel All rights reserved © 2006.6 Event Log Archiving Q3 Event Log Browsing [cont.NE Management 3 .] System Operation . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 3 .4 Operation All rights reserved © 2006. 7.2 . 6 Event Log Archiving Q3 Event Log Browsing [cont.] System Operation .2 .00 Section 3 . Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006.Module 2 .Page 56 .NE Management 3 . Alcatel 3FL41020ACAAWBZZA Edition 1. 7.56 Example of Event Log Display window Alcatel 1353NM Alcatel 1353NM rel. Configure the Log: the operator can select a subset of notifications that wants to store into the persistent file 2. This operation must be performed in two steps: 1. 7. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel 1353NM Alcatel 1353NM rel.NE Management 3 .Page 57 . Alcatel All rights reserved © 2006. Retrieve the archived event notification The administrator can then manage the Event Log File to produce a text file with event fields translated like ELB application.2 . The log file creation is allowed only to Administrator user in order to avoid log files proliferation and because only Admin can run a text editor on NM machine.6 Event Log Archiving Q3 and SNMP NE Event Log Archiving System Operation .4 Operation All rights reserved © 2006.57 The NE Event Log is not persistent after a NE restart The 1353NM gives the possibility to save on a persistent file the Q3 and the SNMP Events selected by the operator.00 Section 3 .Module 2 . 2 . Alcatel All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.6 Event Log Archiving Configure the Log System Operation . Select the notification to be stored in the persistent file 4. From the TMN-OS.58 1.Page 58 . Select Q3 or SNMP as protocol 3. Cancel to close the window Alcatel 1353NM Alcatel 1353NM rel.00 Section 3 . 7. select Actions NE Event Archiving Configuration 2.NE Management 3 .Module 2 . Enable Filter and confirm clicking Yes in the confirmation window 5.4 Operation All rights reserved © 2006. 59 1.Page 59 .4 Operation All rights reserved © 2006.6 Event Log Archiving Retrieve the Archived Events System Operation .2 .Module 2 . Alcatel 3FL41020ACAAWBZZA Edition 1. select the desired node and then issue Operation Event Log Display 2.NE Management 3 . The Log file is shown Alcatel 1353NM Alcatel 1353NM rel.00 Section 3 . 7. Alcatel All rights reserved © 2006. From the Map. NE Management 3 .60 End of Module NE Management Alcatel 1353NM Alcatel 1353NM rel.00 Section 3 .System Operation .4 Operation All rights reserved © 2006.2 .Module 2 . 7. Alcatel All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.Page 60 . 00 Module 1 Alarm Management Alcatel 1353NM . Alcatel All rights reserved © 2006.Section 4 Maintenance Applications 3FL41020ACAAWBZZA Edition 1. Alcatel 3FL41020ACAAWBZZA Edition 1.Page 1 .4 Operation All rights reserved © 2006. 7.Alcatel 1353NM rel.Module 1 .00 Section 4 . Module 1 .Alarm Management 4-1-2 Alcatel 1353NM Alcatel 1353NM rel.Blank Page Maintenance Applications . Alcatel 3FL41020ACAAWBZZA Edition 1. 7.4 Operation All rights reserved © 2006. Alcatel This page is left blank intentionally Document History Edition 01 Date 2007-02-07 Author Sangalli Roberto Remarks First edition All rights reserved © 2006.Page 2 .00 Section 4 . Alarm Management 4-1-3 Objective: To be able to handle the AS application for current alarms and the alarm history Alcatel 1353NM Alcatel 1353NM rel.Module 1 . Alcatel 3FL41020ACAAWBZZA Edition 1. 7.4 Operation All rights reserved © 2006.00 Section 4 .Objectives Maintenance Applications .Page 3 . Alcatel All rights reserved © 2006. Module 1 .Alarm Management 4-1-4 Alcatel 1353NM Alcatel 1353NM rel.Objectives [cont.] Maintenance Applications .4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 4 . Alcatel This page is left blank intentionally All rights reserved © 2006. 7.Page 4 . Modifying and Deleting an Alarm Sublist Performing Actions on Current Alarms Displaying the Alarm History Handling the AS Facilities Administrating the AS Page 7 19 27 39 47 57 67 Alcatel 1353NM Alcatel 1353NM rel.Module 1 .Alarm Management 4-1-5 Switch to notes view! 1 2 3 4 5 6 7 Displaying Current Alarms Alarm Debouncing Creating.Table of Contents Maintenance Applications . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 4 . 7.4 Operation All rights reserved © 2006.Page 5 . Alcatel All rights reserved © 2006. 00 Section 4 . 7.] Maintenance Applications .Alarm Management 4-1-6 Switch to notes view! Page Alcatel 1353NM Alcatel 1353NM rel.Table of Contents [cont.4 Operation All rights reserved © 2006.Page 6 . Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006.Module 1 . Alarm Management 4-1-7 1 Displaying Current Alarms Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 . 7.4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006.Page 7 .00 Section 4 .Maintenance Applications . 1 Displaying current alarms AS principles Maintenance Applications .00 Section 4 .Module 1 .4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel The AS is designed to receive.Alarm Management 4-1-8 Real Time Management Static analysis Display alarms Manage alarms Archive alarms Display alarms Current alarms Raise and clear alarms Archived alarms Alarm surveillance Network resources Alcatel 1353NM Alcatel 1353NM rel. 7. store and display in real time the alarms generated by different sources (CURRENT ALARMS) The AS provides the option of archiving and retrieving alarms (ALARM HISTORY) All rights reserved © 2006.Page 8 . 00 Section 4 . All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel Maximum number of current alarms: up to 10 000 The alarm history is used to monitor the activity of the network and the recurrence of problems and to help the operator detect the critical points on his network. 7.Page 9 .Alarm Management 4-1-9 Current alarms: "live" alarms (permanently refreshed) Alarm history: cleared AND acknowledged alarms alarms purged by operators (even non-cleared alarms) overflow of the current alarm list Alcatel 1353NM Alcatel 1353NM rel.1 Displaying current alarms Current alarms and alarm history Maintenance Applications .Module 1 .4 Operation All rights reserved © 2006. Page 10 .Module 1 .Alarm Management 4 .1 Displaying current alarms Starting AS Maintenance Applications . 7.00 Section 4 . OR Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.1 . Alcatel Inactive sublists have all their counters set to “x” To activate a sublist: select the sublist select menu Sublist --> Activate All rights reserved © 2006.10 Select the "alarm" icon in the list of applications or Alarms in Action menu. Alarm Management 4 .4 Operation All rights reserved © 2006.Page 11 .00 Section 4 .Module 1 . Alcatel All rights reserved © 2006.1 Displaying current alarms Starting AS Maintenance Applications .11 Select the "alarm" icon in the list of applications Flag to indicate new alarms in the sublist Specific counter of cleared alarms Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.1 . 7. Module 1 .1 Displaying current alarms Different levels of information Maintenance Applications .Page 12 .1 .Alarm Management 4 .12 Starting point of AS alarms Operator request Alarm sublist More information Counter summary Actual network Global vision Local vision Detailed vision Increasing detail Alcatel 1353NM Alcatel 1353NM rel.00 Section 4 . 7. Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006. 1 .13 Select a sublist in the "counter summary" window Double click on it OR select Sublist Open Alcatel 1353NM Alcatel 1353NM rel.Alarm Management 4 .Page 13 . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 4 .Module 1 . 7.1 Displaying current alarms Displaying a sublist Maintenance Applications . Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006. 7.Page 14 .Module 1 .Alarm Management 4 .1 Displaying current alarms Displaying more information Maintenance Applications .. Alcatel Other info are being displayed selecting the other menu All rights reserved © 2006. Alcatel 1353NM Alcatel 1353NM rel.14 Select an alarm in the sublist Double click on it OR select Display More Info..00 Section 4 .1 . Alcatel All rights reserved © 2006.1 . 1. Start AS Current USM 2.1 Displaying current alarms Monitoring new alarms Maintenance Applications .15 This function automatically displays the AS window when a new alarm appears.Page 15 .00 Section 4 . Alcatel 3FL41020ACAAWBZZA Edition 1.Alarm Management 4 . 7. Activate the "auto-raise" function check the option in the menu Display Auto-Raise 3.Module 1 . Minimise the window Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006. Module 1 . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.Blank Page Maintenance Applications .00 Section 4 .Page 16 . Alcatel This page is left blank intentionally All rights reserved © 2006.Alarm Management 4-1- 16 Alcatel 1353NM Alcatel 1353NM rel. 7. Module 1 .Page 17 .Alarm Management 4 .1 Displaying current alarms How to do it Maintenance Applications . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006. 7. Alcatel All rights reserved © 2006.1 .17 How to navigate within the AS Alcatel 1353NM Alcatel 1353NM rel.00 Section 4 . 7.4 Operation All rights reserved © 2006.Page 18 . Alcatel All rights reserved © 2006.Module 1 .1 .18 Start the AS application Display a sublist containing alarms Display more information on a given alarm Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.1 Displaying current alarms Exercise Maintenance Applications .00 Section 4 .Alarm Management 4 . Page 19 .1 .Alarm Management 4 . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 . Alcatel All rights reserved © 2006.Maintenance Applications .19 2 Alarm Debouncing Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006.00 Section 4 . Alcatel All rights reserved © 2006.2 Alarm Debouncing Principles Maintenance Applications . to check whether a new Raise of the same Probable Cause on the same NE resource is generated.Page 20 . the Clear event is normally propagated.20 Alarm Debouncing consists in holding the Clear events (no propagation to AS and upper Managers) for a given period.4 Operation All rights reserved © 2006. and the record in the AS is kept with Repetition Counter attribute increased by one If the alarm is not raised within the hold period. 1354BM etc) Alcatel 1353NM Alcatel 1353NM rel. 7. Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 4 . the Clear notification is not propagated to upper managers.Alarm Management 4 . If the alarm is raised again.1 . Alarm debouncing reduce the number of records stored/displayed in the AS CAL and the related traffic to upper managers (1354RM. The Clear Time is kept according to the NE timestamp.Module 1 . T1-T6 is the faulty period as a whole.21 Alarm Raise Event Alarm Clear Event Alarm ON Alarm OFF T1 T2 T3 T4 T5 T6 Resource Name XXXX XXXX XXXX Probable Cause YYYY YYYY YYYY Event Time T1 T3 T5 Clear Time T2 T4 T6 Repetition Counters 0 0 0 To End-Customers. Alcatel The Feature applies to alarms notified by Q3 and SNMP agents All rights reserved © 2006.] Maintenance Applications . 7.00 Section 4 .Module 1 .Alarm Management 4 . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation Resource Name XXXX Probable Cause YYYY All rights reserved © 2006.2 Alarm Debouncing Principles [cont.Page 21 . in which the resource is not able to support a given function Debouncing ON Event Time T1 Clear Time T6 Repetition Counters 2 NO Debouncing Alcatel 1353NM Alcatel 1353NM rel.1 . Alcatel The Feature applies to alarms notified by Q3 and SNMP agents All rights reserved © 2006.Page 22 .Alarm Management 4 .2 Alarm Debouncing Architecture Overview Maintenance Applications .22 Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.1 . 7.Module 1 .00 Section 4 .4 Operation All rights reserved © 2006. Click on Apply 5. Select Actions Alarm Debouncing Alarm Debouncing GUI 2. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel Only Operators with Administrator or Constructor privileges can configure the hold period in the debouncing GUI Multiple Probable causes can be selected and associated to the same Hold Period Debouncing filter values have a network-wide scope (they apply to all NEs supervised by 1353NM) Default value: no debouncing (Hold Period = 0) on any Probable Cause The “Save” command automatically triggers the relevant EMLIMs to update the new table of Hold Periods All rights reserved © 2006.Alarm Management 4 .Page 23 .4 Operation All rights reserved © 2006. Save and Exit Alcatel 1353NM Alcatel 1353NM rel.Module 1 .1 . Select and configure the Hold Period 4.2 Alarm Debouncing How to configure Maintenance Applications .00 Section 4 . Select the Probable Cause 3. 7.23 1. 7. Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 .Page 24 .4 Operation All rights reserved © 2006.1 . Alcatel r01/sr1/sl33 Bouncing Alarm All rights reserved © 2006.Alarm Management 4 .2 Alarm Debouncing Alarm Debouncing Case Maintenance Applications .00 Section 4 .24 Raise T1 Raise Clear T1 T2 T1 T2 T3 Alcatel 1353NM Alcatel 1353NM rel. 00 Section 4 .1 .Alarm Management 4 . 7. Alcatel r01/sr1/sl33 Bouncing Alarm All rights reserved © 2006.2 Alarm Debouncing Alarm Debouncing Case [cont.] Maintenance Applications .Module 1 .Page 25 .4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.25 T1 T2 T3 T4 T1 T2 T3 T4 T5 Alcatel 1353NM Alcatel 1353NM rel. 4 Operation All rights reserved © 2006. 7.Module 1 .Alarm Management 4 . Alcatel r01/sr1/sl33 Bouncing Alarm All rights reserved © 2006.Page 26 .26 T1 T2 T3 T4 T5 T6 T1 T2 T3 T4 T5 T6 Hold Period expiration Alcatel 1353NM Alcatel 1353NM rel.00 Section 4 .1 .2 Alarm Debouncing Alarm Debouncing Case Maintenance Applications . Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. 7.Alarm Management 4 .00 Section 4 . Modifying and Deleting an Alarm Sublist Alcatel 1353NM Alcatel 1353NM rel.Maintenance Applications .1 .Page 27 .27 3 Creating.Module 1 .4 Operation All rights reserved © 2006. select Sublist Create To modify it.00 Section 4 . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 .4 Operation All rights reserved © 2006.Alarm Management 4 .Page 28 . modifying and deleting an alarm sublist Create or modify a sublist Maintenance Applications .3 Creating. Alcatel All rights reserved © 2006. 7.1 .28 To create an alarm sublist. select Sublist Modify and "Sublist Properties" window is being displayed Alcatel 1353NM Alcatel 1353NM rel. 4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.Alarm Management 4 .Module 1 .Page 29 .29 This window is made up of several Items : DISPLAY FILTER SORT TRIGGER parameter to identify the sublist appearance to select alarms to display in the sublist sort criteria for the alarms in the sublist actions to be taken in case of an alarm Alcatel 1353NM Alcatel 1353NM rel. Alcatel All rights reserved © 2006.00 Section 4 . modifying and deleting an alarm sublist Create or modify a sublist Maintenance Applications .1 . 7.3 Creating. Alcatel All rights reserved © 2006. modifying and deleting an alarm sublist Sublist DISPLAY parameters Maintenance Applications .4 Operation To hide Currently displayed attributes in the sublist (select and click on the arrow to remove from the list) All rights reserved © 2006. select and click on the arrow) Click here to apply the modifications Alcatel 1353NM Alcatel 1353NM rel. 7.Alarm Management 4 .3 Creating.1 .00 Section 4 .Page 30 . Alcatel 3FL41020ACAAWBZZA Edition 1.30 Sublist name Sublist colour (single click to modify) Other available attributes (to move to the displayed attributes list.Module 1 . modifying and deleting an alarm sublist Sublist FILTER parameters .Alarm Management 4 .3 Creating. Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 .Page 31 .1 .4 Operation All rights reserved © 2006.31 To save your filter To select a saved filter Alcatel 1353NM Alcatel 1353NM rel. Alcatel All rights reserved © 2006.Basic Maintenance Applications . 7.00 Section 4 . Alarm Management 4 . Alcatel All rights reserved © 2006.Page 32 .3 Creating.32 Filter by date and time Filter by status attribute Filter by severity Filter by alarm type Filter by correlation parameter Alcatel 1353NM Alcatel 1353NM rel. 7.Module 1 . modifying and deleting an alarm sublist Sublist FILTER parameters ..“ to make your choice) All rights reserved © 2006.00 Section 4 . Alcatel 3FL41020ACAAWBZZA Edition 1.Basic Maintenance Applications ..4 Operation Filter by probable cause (click on "Select.1 . 7. Alcatel All rights reserved © 2006.Source Maintenance Applications .1 .33 Select Instance to filter a specific Managed Object as alarm source By comparing a string with the Friendly Name Option to filter by alarm class Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006.Page 33 . modifying and deleting an alarm sublist Sublist FILTER parameters . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 4 .Module 1 .Alarm Management 4 .3 Creating. Alarm Management 4 . Alcatel All rights reserved © 2006.34 Select Instance to filter a specific Management System as alarm source Select to filter by Specific Problem Select to filter by Status Select to filter by TT assignement Select to filter by Repetition Counter value Alcatel 1353NM Alcatel 1353NM rel.00 Section 4 .4 Operation All rights reserved © 2006.Advanced Maintenance Applications . Alcatel 3FL41020ACAAWBZZA Edition 1.1 .Page 34 .3 Creating. modifying and deleting an alarm sublist Sublist FILTER parameters . 7.Module 1 . Alarm Management 4 . Alcatel All rights reserved © 2006. modifying and deleting an alarm sublist Sublist SORT parameters Maintenance Applications .Module 1 . 7.4 Operation All rights reserved © 2006.Page 35 . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 4 .3 Creating.1 .35 To select a saved sort To save your sort choice Parameters used to sort the sublist Parameters not used to sort the sublist (select and click on the arrow to use one) Click here to select the sorting order (increment or decrement) Alcatel 1353NM Alcatel 1353NM rel. 00 Section 4 . Alcatel 3FL41020ACAAWBZZA Edition 1.Alarm Management 4 . for example.3 Creating. load a particular process as soon as the number of critical alarms exceeds a certain value.36 Activate this option to receive a beep each time an alarm appears in the sublist To have a blinking warning that a script is being executed To execute a script if the number of alarms in the sublist is greater than a given value To execute a script if the number of alarms in the sublist is smaller than a given value Alcatel 1353NM Alcatel 1353NM rel.1 . 7. All rights reserved © 2006.4 Operation All rights reserved © 2006.Module 1 .Page 36 . modifying and deleting an alarm sublist Sublist TRIGGER parameters Maintenance Applications . Alcatel By executing the script you could. Alcatel All rights reserved © 2006.1 .37 How to create a sublist How to set a filter Alcatel 1353NM Alcatel 1353NM rel.00 Section 4 . 7.3 Creating.Page 37 . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 . modifying and deleting an alarm sublist How to do it Maintenance Applications .4 Operation All rights reserved © 2006.Alarm Management 4 . Page 38 .4 Operation All rights reserved © 2006. modifying and deleting an alarm sublist Exercise Maintenance Applications .00 Section 4 . Alcatel 3FL41020ACAAWBZZA Edition 1. 7.3 Creating. Alcatel All rights reserved © 2006.38 Create a sublist Choose a name and a colour for your sublist Set the filter to select only: cleared alarms unacknowledged alarms alarms in the last 24 hours Sort the sublist by “event date & time” and “severity” Set the sublist parameters to emit a tone for incoming alarms Alcatel 1353NM Alcatel 1353NM rel.Alarm Management 4 .Module 1 .1 . Page 39 .39 4 Performing Actions on Current Alarms Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006.Module 1 . Alcatel All rights reserved © 2006.Alarm Management 4 . 7.Maintenance Applications .1 . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 4 . The only operator who can unreserve (a given alarm) is the one who initially reserved it.Module 1 . Alcatel An alarm can be reserved only if it has not been reserved before by another operator.00 Section 4 . All rights reserved © 2006.Alarm Management 4 . 7.Page 40 .1 .4 Operation All rights reserved © 2006.40 Reservation ensures that you are the only operator responsible for an alarm To reserve: open a sublist select an alarm select Action Reserve To unreserve: open a sublist select the reserved alarm select Action Unreserve Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.4 Performing actions on current alarms Reserving / unreserving an alarm Maintenance Applications . e.00 Section 4 ..published by Remedy Corporation).Alarm Management 4 . greyed). Alcatel 3FL41020ACAAWBZZA Edition 1. AS can be customised to interface with the third-party Trouble-Ticketing management product ARS (Action Request System .Page 41 . If AS is configured to run without ARS. All rights reserved © 2006.. all menus concerning the management of trouble tickets are inaccessible (i. Alcatel A trouble ticket contains at least the information on the problem. Confirm indicator in the sublist change to YES Alcatel 1353NM Alcatel 1353NM rel.41 Trouble ticket = collection of all information about one problem Open a sublist Select a single alarm or a group of alarms Select Action Trouble Ticket.4 Operation All rights reserved © 2006. but can also include information on the actions performed to solve the problem.4 Performing actions on current alarms Generating trouble tickets Maintenance Applications .Module 1 .1 . 7. 42 By acknowledging alarms.1 .Alarm Management 4 .Page 42 . All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 . 7.4 Performing actions on current alarms Acknowledging Maintenance Applications .00 Section 4 . Open a sublist Select one or a group of alarms Select Action Acknowledge the state changes from NACK (Non ACKnowledge) to ACK (ACKnowledge) Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006. So the acknowledgement will archive the cleared alarms and remove them from the current alarms list. you indicate that they have been registered. Alcatel Acknowledging a cleared alarm is an implicit archiving action. 4 Operation All rights reserved © 2006. if they match the archiving filter. Alcatel 3FL41020ACAAWBZZA Edition 1.43 Open a sublist Select one alarm or a group of alarms Select Action Manual Purge Purged alarms disappear from the current alarms list and are now archived.4 Performing actions on current alarms Manual purge Maintenance Applications .00 Section 4 . Alcatel 1353NM Alcatel 1353NM rel.Alarm Management 4 . 7. Alcatel All rights reserved © 2006.1 .Module 1 .Page 43 . 7.00 Section 4 .Blank Page Maintenance Applications .Alarm Management 4-1- 44 Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 .4 Operation All rights reserved © 2006.Page 44 . Alcatel This page is left blank intentionally All rights reserved © 2006. Page 45 .4 Performing actions on current alarms Exercise Maintenance Applications . Alcatel All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. acknowledged.4 Operation All rights reserved © 2006. not cleared.45 Reserve an alarm Try to unreserve an alarm reserved by an other user Unreserve the previously reserved alarm If ARS is active generate a trouble ticket for an alarm Acknowledge a cleared alarm (note the effect on the sublist) Acknowledge an not cleared alarm (note the effect on the sublist) Unreserve the previously reserved alarm Purge alarms (cleared. non acknowledged) Alcatel 1353NM Alcatel 1353NM rel.00 Section 4 .Module 1 .1 .Alarm Management 4 . 7. Alcatel This page is left blank intentionally All rights reserved © 2006.4 Operation All rights reserved © 2006. 7.00 Section 4 .Alarm Management 4-1- 46 Alcatel 1353NM Alcatel 1353NM rel.Blank Page Maintenance Applications .Page 46 . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 . 7.Module 1 . Alcatel All rights reserved © 2006.00 Section 4 .Maintenance Applications .4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.Alarm Management 4 .1 .47 5 Displaying the Alarm History Alcatel 1353NM Alcatel 1353NM rel.Page 47 . 1 . Alcatel 3FL41020ACAAWBZZA Edition 1. 7.Page 48 . those which were previously acknowledged are forwarded to the HAL All rights reserved © 2006.4 Operation All rights reserved © 2006. Overflow Maximum size of the CAL has been reached and alarms are removed from it Synchronisation Alarms that are not confirmed on a synchronisation command are automatically cleared by the application. Alcatel Auto-purging these alarms have never been inserted in the Current Alarm List (CAL).5 Displaying the alarm history Description Maintenance Applications .Module 1 .48 The Historical Alarm List (HAL) contains former current alarms that have been archived through one of the following processes (if these alarms match the archiving filter): auto-purging manual purging overflow acknowledged and cleared alarms synchronisation Alcatel 1353NM Alcatel 1353NM rel. Among them. Manual purging an AS operator has manually removed one or more selected alarms from the CAL.Alarm Management 4 .00 Section 4 . All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. This repository receives all the alarms passing through the Archiving filter. Alcatel The HAL is stored using a specific ad-hoc format (the Public Archive format).1 .Alarm Management 4 . You can store a set of alarms (put together by selecting from the Main List or any sublist) in a user.00 Section 4 .49 CAL or auto purge filter Archiving filter HAL (HP LOG) filter HAL (Public Archive) filter Sublist Main list Automatic Operator action filter User file User file User file Save selection User file Alcatel 1353NM Alcatel 1353NM rel. or in conjunction with this source.5 Displaying the alarm history Principle Maintenance Applications . You can then retrieve alarms from this file instead of from the HP-Log or Public Archive.Page 49 .defined file.4 Operation All rights reserved © 2006. 7.Module 1 . Page 50 . Alcatel All rights reserved © 2006.50 In the Current Alarm List. select Navigation A window opens with an empty list Archive >> confirm Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006.5 Displaying the alarm history Starting up Maintenance Applications . 7. Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 4 .1 .Alarm Management 4 .Module 1 . . Retrieve the alarm list with 2.51 1.1 ..Page 51 .Module 1 . 7. 3. Click "Apply“ : the historical alarm list (HAL) is displayed Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006... Alcatel 3FL41020ACAAWBZZA Edition 1.Alarm Management 4 . Set the filter parameters Archive OR Retrieve from Public Archive. Alcatel All rights reserved © 2006.00 Section 4 .5 Displaying the alarm history Retrieve alarms Maintenance Applications . Retrieve from User Files. 5 Displaying the alarm history Retrieve alarms [cont. Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006. 7.Page 52 .Alarm Management 4 .] Maintenance Applications . Alcatel 1353NM Alcatel 1353NM rel.Module 1 .1 .00 Section 4 .52 The main operations on archived sublists are performed in the same way as for current alarms. All rights reserved © 2006.4 Operation All rights reserved © 2006.1 . During the storage process. Alcatel 3FL41020ACAAWBZZA Edition 1.5 Displaying the alarm history Saving alarms to a user file Maintenance Applications . Alcatel The directory in which the file will be stored has already been configured by the administrator.00 Section 4 .53 SAVE Open a sublist of the HAL Select one or a group of alarms Select Action Save As Enter a file name Alcatel 1353NM Alcatel 1353NM rel.Alarm Management 4 .Page 53 . 7.Module 1 . a process window is displayed. Alcatel 3FL41020ACAAWBZZA Edition 1. During the storage process.1 . All rights reserved © 2006..Page 54 .4 Operation All rights reserved © 2006. window.00 Section 4 . 7..Module 1 .5 Displaying the alarm history Removing an archived user file Maintenance Applications . a process window is displayed.Alarm Management 4 .54 REMOVE From the "counter summary". Alcatel The directory in which the file will be stored has already been configured by the administrator. select Archive Remove User Files. Select the file to remove and move it to "selected user files" list by clicking on the arrow Click "OK" To select To unselect Alcatel 1353NM Alcatel 1353NM rel. 7. Alcatel All rights reserved © 2006.00 Section 4 .g. with “Manual purge” as “Insertion cause”) Create a user file with a selection of alarms from the sublist Close and restart the Historical Alarm List Alcatel 1353NM Alcatel 1353NM rel.55 Start the Historical Alarm List Retrieve the alarms from public archive Look for the alarms purged in the previous exercise and find the insertion cause Create a sublist (e.Page 55 .Module 1 . Alcatel 3FL41020ACAAWBZZA Edition 1.1 .4 Operation All rights reserved © 2006.5 Displaying the alarm history Exercise Maintenance Applications .Alarm Management 4 . 4 Operation All rights reserved © 2006.56 Retrieve the alarms from your user file and check that it is the same list Remove your user file Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.1 .Alarm Management 4 . Alcatel All rights reserved © 2006. 7.] Maintenance Applications .00 Section 4 .Module 1 .Page 56 .5 Displaying the alarm history Exercise [cont. 4 Operation All rights reserved © 2006.1 .Module 1 .00 Section 4 . Alcatel All rights reserved © 2006.Alarm Management 4 .Page 57 . Alcatel 3FL41020ACAAWBZZA Edition 1.Maintenance Applications .57 6 Handling the AS Facilities Alcatel 1353NM Alcatel 1353NM rel. 7. 6 Handling the AS facilities Navigating from AS to PNM Maintenance Applications - Alarm Management 4 - 1 - 58 To view the Network Element having generated an alarm 1. Select an alarm from the sublist 2. Select Navigation Topology Manager A PNM window opens displaying the submap of the Network Element generating the alarm Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 4 - Module 1 - Page 58 6 Handling the AS facilities Navigating from AS to an external application Maintenance Applications - Alarm Management 4 - 1 - 59 You can navigate to an external application of your choice This navigation feature has to be configured during installation 3. The NE USM showing the alarmed object is shown 1. Select an alarm 2. Select “External Application Related_EmlUsm” Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 4 - Module 1 - Page 59 6 Handling the AS facilities Autodiscovery Alarm Maintenance Applications - Alarm Management 4 - 1 - 60 An autodiscovery alarm is generated whenever a NE in the managed network sends to the 1353NM an autodiscovery notification. See the Module “Network Topology” in the Section “Graphical Interface” for details 1. Select a “NE autodiscovery alarm” 2. Select “External Application CreateNe” Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation 3. The “Create NE GUI is opened All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 4 - Module 1 - Page 60 6 Handling the AS facilities Exporting alarms to a printer or text file Maintenance Applications - Alarm Management 4 - 1 - 61 You can export a whole sublist or a selection of alarms 1. Open the sublist 2. Select the relevant alarms 3. Select Action Output an "output" window opens TO PRINT Select the "print" button Click "OK" Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 4 - Module 1 - Page 61 6 Handling the AS facilities Exporting alarms to a printer or text file [cont.] Maintenance Applications - Alarm Management 4 - 1 - 62 You can export a selection of alarms (the selection may include all the alarms contained in the sublist) TO CREATE A TEXT FILE Select the "Export" button Choose "select" and enter a file name Click "OK" Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 4 - Module 1 - Page 62 6 Handling the AS facilities Obtaining a report on an action Maintenance Applications - Alarm Management 4 - 1 - 63 It allows you to view a report giving detailed information on the progress or execution (successful or not) of an operator action. In the "Counter summary" window, select Navigation Report Status column the following window is displayed Report detail Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel For example, you may try to purge alarms manually although some of them have been previously reserved by another operator. The operation will succeed for some alarms and fail for others. This kind of event is reported by the AS. Possible type of action Get Alarm List Attributes Get All Alarms Get More Alarm Info Get Correlated Alarms Set Alarm List Attributes Set User Note Reserve Alarms Unreserve Alarms Acknowledge Alarms Create Trouble Ticket Manually Purge Alarms Synchronise Application Possible status of the operation In Progress (Indeterminate severity level colour): the request is ongoing. Aborted (Minor severity level colour): the request has not been sent. Failure (Critical severity level colour): request failed. Success (Cleared severity level colour): request succeeded. Half Success (Major severity level colour): the request has partially succeeded. In this case, read the report details to find out what failed in the request. All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 4 - Module 1 - Page 63 6 Handling the AS facilities Clearing or deleting a report on a performed action Maintenance Applications - Alarm Management 4 - 1 - 64 Clear the whole report list Clear Delete reports for some selected actions Open the report window Select the reports to be deleted from the list Select menu Report Delete... Open the report window Select menu Report Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 4 - Module 1 - Page 64 6 Handling the AS facilities Exercise Maintenance Applications - Alarm Management 4 - 1 - 65 Navigation: Open a sublist Select an alarm Start PNM with the AS facility Print out a set of alarms with the export facility Display the reports on the actions performed Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 4 - Module 1 - Page 65 Blank Page Maintenance Applications - Alarm Management 4-1- 66 Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel This page is left blank intentionally All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 4 - Module 1 - Page 66 Maintenance Applications - Alarm Management 4 - 1 - 67 7 Administrating the AS Alcatel 1353NM Alcatel 1353NM rel. 7.4 Operation All rights reserved © 2006, Alcatel All rights reserved © 2006, Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 4 - Module 1 - Page 67 Synchronisation Because the CAL. The operator can also specify the behaviour of the CAL when the overflow occurs (wrap/halt). the operator is provided with several advanced features for solving capacity overflow problems The default size of the CAL is 10000 alarms. It can be changed by the operator in the “CAL Administration” window (see next slides) Trouble Ticket filter ARS Archive filter CAL HAL Auto-Ack filter AutoPurge filter Alarm NE Alcatel 1353NM Alcatel 1353NM rel. a purge will automatically begin.Page 68 . that is without being displayed in the current alarms part of Alarm Supervision. for any reason. some incoming alarms may be immediately archived.Alarm Management 4 . 7. Automatic purge According to the filter criteria. Selective archiving mechanism According to the filter criteria. The operator specifies the size of the purge (number of alarms) and the criteria by which the alarms are to be deleted (these alarms are archived in the historical list). the operator can prevent some alarms from being archived in the historical list. By default. If this filter is changed. All rights reserved © 2006. the operator may decide to acknowledge some alarms automatically when they enter the CAL.1 . Automatic acknowledgement According to the filter criteria.00 Section 4 .7 Administrating the AS Advanced feature mechanisms and alarm flow Maintenance Applications . the alarms that are not archived are lost.Module 1 . Alcatel CAL size The operator can assign the percentage fill level at which a warning is emitted. may become out of step with the network alarms situation. the system plans to archive all the alarms. the operator has a way of automatically requesting the creation of trouble tickets in an external ARS application when the alarms appear in the CAL.68 Because of the Current Alarms List has a limited size. Alcatel 3FL41020ACAAWBZZA Edition 1. without going through the current state. Automatic trouble ticket creation According to the filtering criteria.4 Operation delete All rights reserved © 2006. In wrap mode. the operator can provoke a synchronisation mechanism which performs a global refresh of the CAL checking all the resources involved. Alcatel CAL Administration To view the size of the Current Alarm List. Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 .Page 69 . 7.69 In the "counter summary" window.4 There are five pages CAL Administration Archiving filter Auto-Purge Auto-Trouble Ticket Auto-Acknowledge Alcatel 1353NM Alcatel 1353NM rel. and to customise the parameters relating to overflows and view the current alarm fullness rate Archiving Filter To archive alarms which are removed from the CAL to the HAL Auto-Purge To divert some incoming alarms automatically to the HAL Auto-TT To generate a trouble ticket automatically for some alarms Auto-Ack To acknowledge incoming alarms automatically All rights reserved © 2006. select Option Administration 1353NM-7.7 Administrating the AS Configuring the AS Maintenance Applications .00 Section 4 .Alarm Management 4 .4 Operation All rights reserved © 2006.1 . 1 .] Maintenance Applications .00 Section 4 . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 .Alarm Management 4 . Alcatel All rights reserved © 2006. 7.4 Operation All rights reserved © 2006.70 You can set a filter for: Archiving filter Auto-Purge Auto-Trouble Ticket Auto-Acknowledge Refer to the previous chapter to learn how to set the filter Alcatel 1353NM Alcatel 1353NM rel.7 Administrating the AS Configuring the AS [cont.Page 70 . Alcatel 3FL41020ACAAWBZZA Edition 1.71 Set Overflow action mode to wrap and purge size to 20 Filter Change the auto-purge filter to archive MINOR alarms automatically Create a minor alarm on an NE Check that the alarm is sent directly to the historical alarm list Reset the filter to Match-none Alcatel 1353NM Alcatel 1353NM rel.Alarm Management 4 .00 Section 4 .1 . 7. Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006.Page 71 .7 Handling the AS facilities Exercise Maintenance Applications .Module 1 . 72 End of Module Alarm Management Alcatel 1353NM Alcatel 1353NM rel.Module 1 .Page 72 .00 Section 4 .4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006. 7.1 . Alcatel 3FL41020ACAAWBZZA Edition 1.Maintenance Applications .Alarm Management 4 . Page 1 . Alcatel All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.Module 2 .00 Section 4 .Section 4 Maintenance Applications Module 2 Performance Management 3FL41020ACAAWBZZA Edition 1.00 Alcatel 1353NM .4 Operation All rights reserved © 2006.Alcatel 1353NM rel. 7. 00 Section 4 . Alcatel This page is left blank intentionally Document History Edition 01 Date 2007-02-07 Author Sangalli Roberto Remarks First edition All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.Module 2 . 7.Page 2 .Blank Page Maintenance Applications .Performance Management 4-2-2 Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006. Module 2 .4 Operation All rights reserved © 2006. 7.Performance Management 4-2-3 Objective: to be able to manage the transmission quality records Alcatel 1353NM Alcatel 1353NM rel. Alcatel All rights reserved © 2006.Page 3 .Objectives Maintenance Applications .00 Section 4 . Alcatel 3FL41020ACAAWBZZA Edition 1. Page 4 .Objectives [cont.] Maintenance Applications .Performance Management 4-2-4 Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006. Alcatel This page is left blank intentionally All rights reserved © 2006. 7.00 Section 4 .Module 2 . Module 2 .Table of Contents Maintenance Applications .Page 5 .00 Section 4 .Performance Management 4-2-5 Switch to notes view! 1 2 3 4 Definition of Counters Configuring Performance Points Displaying Performance Data Performance Reports Page 7 19 27 33 Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. 7. ] Maintenance Applications . Alcatel All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.Module 2 .Performance Management 4-2-6 Switch to notes view! Alcatel 1353NM Alcatel 1353NM rel. 7.00 Section 4 .4 Operation This page is left blank intentionally All rights reserved © 2006.Page 6 .Table of Contents [cont. 7.00 Section 4 .Page 7 . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 2 .Performance Management 4-2-7 1 Definition of Counters Alcatel 1353NM Alcatel 1353NM rel.Maintenance Applications . Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006. Page 8 .1 Definition of counters Introduction to SDH performance monitoring Maintenance Applications .4 Operation N+1 BIP N All rights reserved © 2006.00 Section 4 .Module 2 . 7.Performance Management 4-2-8 Principles: Based on counting errored BIP bytes. Alcatel All rights reserved © 2006. Byte B1: BIP8 (RSOH) Byte B2: BIP24 (MSOH of an STM1 rate) Byte B3: BIP8 (VC4 POH) Byte V5: BIP2 (VC12) 1. Calculates the BIPs (on frame transmission) Time N+3 N+2 BIP Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1. Comparison of BIPs (on frame reception) Time N+3 N+2 Extraction N+1 N BIP computation COMPARE ≠ INCREMENT COUNTERS Alcatel 1353NM Alcatel 1353NM rel.Page 9 .00 Section 4 .] Maintenance Applications . 7.1 Definition of counters Introduction to SDH performance monitoring [cont.Performance Management 4-2-9 2. Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006.Module 2 . while the far-end information reflects the performance of the one-way section or path from A to B. while the far-end information reflects the performance of the one-way section or path from B to A.] Maintenance Applications .Module 2 .Performance Management 4 . On Node B the front-end information reflects the performance of the one-way section or path from A to B. Alcatel 3FL41020ACAAWBZZA Edition 1.2 . 7.4 Operation P-REI All rights reserved © 2006.00 Section 4 .10 Far End (Node A) V C 1 2 V C 1 2 V C 4 V C 4 M S O H M S O H R S O H R S O H Near End (Node B) TX STM-N RX R S O H R S O H M S O H M S O H V C 4 V C 4 V C 1 2 V C 1 2 RX STM-N TX Byte B2 Byte M1 (B2 return) MS-REI Byte B3 Byte G1 (B3 return) P-REI Byte V5 Byte V5 Alcatel 1353NM Alcatel 1353NM rel.1 Definition of counters Introduction to SDH performance monitoring [cont. All rights reserved © 2006. Alcatel On Node A the front-end information reflects the performance of the one-way section or path from B to A.Page 10 . a Threshold Crossing Alarm (TCA) is generated by the NE.Module 2 . collecting performance data. The operator can initiate performance monitoring on one or more subsets of counters for each TP. xx : 15. 7.00 Section 4 . Alcatel TP: Termination Point The history files are date-and-time-stamped by the UTC (as for alarms). xx : 30 and xx : 45 for 15-minute periods.Performance Management 4 . The measurement intervals begin at 00 : 00 (UTC) for 24 hour periods and at xx : 00. Thresholds The thresholds can be defined separately for 15 minute and 24 hour counters.Page 11 . If threshold values are exceeded for a TP. Data is collected automatically and periodically by the OS.] Maintenance Applications . Alcatel 1353NM Alcatel 1353NM rel. displaying performance data. The main performance management functions are: configuring the counting period (15 min and/or 24 hours) for each of the NE's performance points.11 The performance counters are linked to TPs to count transmission errors.4 Operation All rights reserved © 2006. Data collection takes place at 00h02 for 24-hour periods and every two hours for 15-minute periods. configuring quality thresholds.2 . All rights reserved © 2006.1 Definition of counters Introduction to SDH performance monitoring [cont. Alcatel 3FL41020ACAAWBZZA Edition 1. An SES is also counted as an errored second. For the NEs that are counted with G.Page 12 . Alcatel 3FL41020ACAAWBZZA Edition 1. CSES A sequence of X consecutive SES. or at least one Severely Disturbed Period (SDP). EB A block with one or more errored bits.821 counter format. in which X can be configured.00 Section 4 . A new unavailable time period begins when ten consecutive non-SES events occur. 7. Alcatel BBE The BBE counter measures the number of errored blocks occurring outside of an SES. All rights reserved © 2006. SES A period of one second which contains more than 30% errored blocks.Performance Management 4 . UAS A UAS is a second that is part of an unavailable time period. UAT A UAT period which begins on the occurrence of ten consecutive SES events. These 10 seconds are considered to be part of an unavailable time period.Module 2 .2 .12 BBE EB ES SES CSES UAT UAS Background Block Error Error Block Errored Second Severely Errored Second Consecutive Severely Errored Second UnAvailable Time UnAvailable Second Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006.1 Definition of counters Managed SDH performance counters (local) Maintenance Applications . ES A period of one second with one or more errored blocks. 00 Section 4 . Alcatel FEBBE Far end BBE FEBC Identifies.Module 2 .1 Definition of counters Managed SDH performance counters (remote) Maintenance Applications . 7.Performance Management 4 . on a terminal.2 .4 Operation All rights reserved © 2006. the number of errored blocks counted within a second.Page 13 . Alcatel 3FL41020ACAAWBZZA Edition 1.13 FEBBE FEBC FEBE FECSES FEES FESES FEUAS Far End Background Block Error Far End Block Error Count Far End Block Error Far End Consecutive Severely Errored Second Far End Errored Second Far End Severely Errored Second Far End UnAvailable Second Alcatel 1353NM Alcatel 1353NM rel. received by the far end terminal FEBE Far end EB FECSES Far end CSES FEES Far end ES FESES Far end SES FEUAS Far end UAS All rights reserved © 2006. Justification is used to adapt the ratio of the received container with the ratio of the transmitted container. All rights reserved © 2006. This event is identified on octets A1/A2 of the SDH frame.00 Section 4 . Alcatel 3FL41020ACAAWBZZA Edition 1. increasing or reducing the pointer. PJC Represents the number of pointer justification events counted.Performance Management 4 . PSC Number of switches between the service channel and the defence channel. Alcatel OFS An OOF (Out Of Frame) second is defined as a second in which one or more out-of-frame events occur.2 . PSD Defence duration. 7.Page 14 . FEC Number of errored FEC blocks during a time unit.Module 2 .1 Definition of counters Managed SDH performance counters (other) Maintenance Applications .14 OFS PSC PSD PJC FEC Out of Frame Second Protection Switch Counter Protection Switch Duration Pointer Justification Counter Forward Error Correction Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006. 15 On WDM equipment.00 Section 4 . and the receiving transponder is able to detect errors and possibly correct them while decoding the FEC.Page 15 .1 Definition of counters Performance Monitoring on FEC Maintenance Applications .Module 2 .Performance Management 4 . some transponder boards also support PM at FEC layer: FEC is inserted by the transponder on the coloured transmission side. 7. Alcatel All rights reserved © 2006. PM on FEC layer gives information about the signal quality between the transmitting transponder coloured output and the receiving transponder coloured input PM on WDM signal (FEC) Alcatel 1353NM Alcatel 1353NM rel.2 .4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. 16 ES: US: BEC: SCS: BBU: SUS: BER: QF: Errored Seconds: count of seconds in which at least a corrected error is detected Uncorrected Seconds: count of seconds in which at least an uncorrected error is detected Background Error Corrected: count of FEC corrected errors that occurred outside a SCS (result is divided by 512). Severely Uncorrected Seconds: count of seconds in which a FEC layer defect occurred or in which more than 33 538 048 FEC blocks were uncorrected.Page 16 . the NM computes the BER based on the BEC counter Q-Factor: not a primitive counter. Alcatel 3FL41020ACAAWBZZA Edition 1. Bit Error Rate: not a primitive counter. 7.Module 2 .Performance Management 4 . the NM computes the Q-Factor based on the BER Alcatel 1353NM Alcatel 1353NM rel.2 . Background Block Uncorrected: count of FEC uncorrected blocks that occurred outside a SUS.1 Definition of counters Managed performance counters: PM on FEC Maintenance Applications .4 Operation All rights reserved © 2006.00 Section 4 . Alcatel All rights reserved © 2006. Severely Corrected Seconds: count of seconds with a FEC layer defect or at least one FEC uncorrected block or more than 33 538 048 FEC corrected errors. i. Alcatel 1353NM Alcatel 1353NM rel.1 Definition of counters Managed performance counters: Ethernet Maintenance Applications . For these kinds of board.4 Operation All rights reserved © 2006.2 .Page 17 . starting from Rel 1. 2. 1353NM support the two granularity type.Module 2 .Performance Management 4 . • Mixed networks where some ISA-ES provide 15min and some others ISA-ES provide 1h data are not supported When the supervision is started by the 1353NM on a ISA-ES with a different monitoring granularity period. 7. support PM granularity period of either 1h or 15min (please note that ALL cards on the same NE must be configured with the same granularity period. see notes) and 24h granularity period All counters are free-running: this means that they are not reset at the end of the sampling period. For this reason.00 Section 4 . the PM points of then NE all switch to the granularity configured in the 1353NM All rights reserved © 2006. either15min or 1h). Alcatel ISA-ES1/4. with the following configuration notes and constraints: The desired granularity is settled in the configuration file of the EMLIM supporting the NE (EMLIMCORBASNMP) during the system configuration (see details in the Administration handbooks and Training Manuals): EMLIMs then set the monitoring granularity on the NE at the Start Supervision. Due to the fact that the configuration file is unique for all the EMLIMCORBASNMP instantiated in the system. including Ethernet header characters Total Received Correct Frames: total number of Ethernet frames received correctly by the Virtual Ethernet Interface Total Transmitted Octects: total number of octets of Ethernet frames transmitted out by the Virtual Ethernet Interface.2 on. This lead easily to an unfriendly GUI representation.17 TRCO: TRCF: TTO: TTF: TDF: TRSEF: Total Received Correct Octects: total number of octets of Ethernet frames received correctly by the Virtual Ethernet Interface. the consequence is that the selected granularity should apply to the ISA-ES board of the whole network supervised by the 1353NM. including Ethernet header characters Total Transmitted Frames: total number of Ethernet frames transmitted out by the Virtual Ethernet Interface Total Discarded Frames: total number of Ethernet frames which were chosen to be discarded bue to buffer congestion Total Received Service Errored Frames: total number of Ethernet frames received uncorrectly by the Virtual Ethernet Interface Counters are sampled with 1h (or 15 min. Alcatel 3FL41020ACAAWBZZA Edition 1. and ISA-ES16. reports on Ethernet counters are available in 1353NM showing deltas with respect to the previous measurement.e.3 on. starting from Rel. the Analog PM involves all the measurements available by the NE USM by the choice “Equipment (or Board) Istantaneous Measurements.2 and 1626LM Rel 3. Alcatel 3FL41020ACAAWBZZA Edition 1.1 Definition of counters Analog performance monitoring Maintenance Applications .4 Operation All rights reserved © 2006.Module 2 . Basically.2 .00 Section 4 .Performance Management 4 .0 DWDM equipment support the monitoring of analog values. 7.18 1620LM Rel 2. these include: Tx Optical Power Level Rx Optical Power Level Bias Current Level Temperature Etc. The user can then select Monitoring Points for Report generation (Table Chart) The sampling periods are 15m & 24h Alcatel 1353NM Alcatel 1353NM rel. For boards such as TRBD/TRBC/MCC30/SFP/BMDX/CMDX/LOFA/ALCT 1353NM is in charge to sample and store input/output power values in the PM DB.Page 18 . Alcatel All rights reserved © 2006. 00 Section 4 .2 .19 2 Configuring Performance Points Alcatel 1353NM Alcatel 1353NM rel.Performance Management 4 . Alcatel 3FL41020ACAAWBZZA Edition 1. 7. Alcatel All rights reserved © 2006.4 Operation All rights reserved © 2006.Maintenance Applications .Module 2 .Page 19 . 2 Configuring performance points Configuring thresholds Maintenance Applications . Alcatel N.: In this Chapter only the configuration of SDH performance points and Analog PMare taken into consideration.Page 20 . please refer to the Operator Handbooks and Training Manuals of the specific NE family.Module 2 . For the configuration of Ethernet and FEC performance points.Performance Management 4 . All rights reserved © 2006.00 Section 4 . you can perform the following operations on a thresholds table create modify display delete link to a TP entity 1. Click the button representing the action you want to carry out Alcatel 1353NM Alcatel 1353NM rel.20 Open an equipment view Select the menu: Configuration Performance Threshold Tables In this window. Select the table from the list (except for creation) 2.2 . Alcatel 3FL41020ACAAWBZZA Edition 1. 7.4 Operation All rights reserved © 2006.B. 4 Operation All rights reserved © 2006. values must be multiplexed by 4* 24 All rights reserved © 2006. Enter the 2. 5. 6. Alcatel 3FL41020ACAAWBZZA Edition 1.8 BIP .25 Blocks per second 8000 3072000 8000 192000 8000 8000 2000 BIP type BIP – 8 BIP – 384 BIP – 8 BIP – 24 BIP .RS STM16 – MS STM1 – RS STM1 – MS VC4 VC3 VC12 Block size (bits) 311040 801 19440 801 18792(261x9x8) 6120 1120 Blocks per frame 1 384 1 24 1 1 0. 3.Performance Management 4 . BBE values must be multiplexed by 4 For STM16.Module 2 .Page 21 . BBE values must be multiplexed by 16 High Treshold / BER 5790 (~ 10-7) 150 Gruanuality: 24 hours For 24 hours period.2 Configuring performance points Configuring threshold tables Maintenance Applications . table name (creation 7. 7.RS Counters Low Threshold / BER BBE 58 ( ~ 10-9) ES 50 STMn For STM4.2 .21 1. Alcatel Section / Path type STM16 .00 Section 4 . only) (a number!) Select granularity (creation only) Define the upper threshold value Define the lower threshold value Select the alarm severity Disable "send notification" if no message is to be sent on a threshold crossing Click apply Alcatel 1353NM Alcatel 1353NM rel. 4.8 BIP .2 Example Granuality: 15 minutes STM1 . Module 2 .Performance Management 4 .. button to open the window for selecting the threshold table. Select the menu 4.Page 22 . • N. Select the Remove button to separate the threshold table from the entity. VC-n or TU-n) 3. 8. 7. Click the Attach. Click Apply Repeat steps 5 to 9 for all other POM/SUT 10..B. This notification is reflected in a UAT alarm in the AS.00 Section 4 . This parameter can only be selected when creating and cannot be modified subsequently Suppress Additional threshold: • If this option is enabled. Port Performance Configure Performance Monitoring Select a POM/SUT (if required) Define the parameters Mode.22 1. RST. history data is collected in the entity selected for the corresponding TP Lock data collection: If the Lock option is selected. 6. performance monitoring remains active but data collection is stopped. All rights reserved © 2006.2 Configuring performance points Starting/stopping performance monitoring Maintenance Applications . Select a TP (MST. PM Threshold Table Select. Threshold table Link a threshold table to the selected TP. All the history data remains available. otherwise the PM data are not sent to the OS Notifications UAT: notifications of UAT (UnAvailable Time) are created if the option is enabled. Alcatel 3FL41020ACAAWBZZA Edition 1. 5. notification is sent only for the first counter that exceeds the threshold defined during a granularity period. All current values are set to zero EML OS Monitoring: Click on Enable and select “Archiving”.4 Operation All rights reserved © 2006. Display the port view of a board 2. AU4.2 . Click the Close button Alcatel 1353NM Alcatel 1353NM rel. Assign only the threshold tables that correspond to the granularity period of the data sets (a 15-minute threshold table must not be assigned to a data set covering 24 hours). and configure the threshold table. Alcatel POM: Path Overhead Monitoring SUT: Supervise Unequipped Termination Mode data collection: Select this button to enable performance monitoring create history data: If this option is selected. • If the option is disabled. EML OS Monitoring and Notifications Choose a proper Threshold table and Attach it Click Apply Click on "set ASAP " if you want to configure ASAP 9. threshold violation of each counter is indicated. 7. Performance Management 4 .2 .23 Open the equipment view Select Configuration Analog PM Configuration On Equipment for configuring the Analog PM on all the equipment (the following window will open) On selected object for configuring the Analog PM on the single selected board Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006.00 Section 4 .Module 2 .2 Configuring performance points How to set Analog PM in NE USM Maintenance Applications . Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006. 7.Page 23 . 2 .00 Section 4 .Module 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.2 Configuring performance points How to set Analog PM in NE USM Maintenance Applications . Alcatel All rights reserved © 2006. 7.24 Start the PM by selecting “Start” in the “PM action” column for the 15’ or the 24h If the data must be sent to the 1353NM.Page 24 . the “Archiving” cell must be set to “Yes” Click on “Apply” after setting the desired configuration Alcatel 1353NM Alcatel 1353NM rel.Performance Management 4 . 00 Section 4 .Page 25 .Module 2 .2 Configuring performance points Exercise Maintenance Applications .25 Display a threshold configuration table and note down the parameters Create a new threshold configuration table.4 Operation All rights reserved © 2006.Performance Management 4 . Alcatel All rights reserved © 2006.2 . Alcatel 3FL41020ACAAWBZZA Edition 1. using the previous pointers as an example Start performance monitoring for two TPs (15-minute counter) Alcatel 1353NM Alcatel 1353NM rel. 7. Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.Performance Management 4-2- 26 Alcatel 1353NM Alcatel 1353NM rel.00 Section 4 .Blank Page Maintenance Applications .Module 2 .Page 26 . 7. Alcatel This page is left blank intentionally All rights reserved © 2006. 2 .Module 2 .Maintenance Applications .Page 27 .4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006. 7.00 Section 4 .27 3 Displaying Performance Data Alcatel 1353NM Alcatel 1353NM rel.Performance Management 4 . Reset: Reset counters to zero for the running period N. Alcatel 3FL41020ACAAWBZZA Edition 1.3 Displaying performance data Displaying performance data for single TP Maintenance Applications . Select the menu Port Performance Data Display Current POM/SUT 4. All rights reserved © 2006. Display the port view of a board 2. Alcatel Administrative State: Indicates whether performance data selection is locked for the local user.2 .Module 2 .Page 28 .28 From the Equipment view : 1. Select a suitable TP 3.B. please refer to the Operator Handbooks and Training Manuals of the specific NE family. This information tells the user whether data collection covers the total period. Elapsed Time: Indicates the time that has elapsed since the start of the monitoring interval.: In this Chapter only the displaying of SDH performance data are taken into consideration. Suspect Data: Indicates whether data collection errors have occurred during the collection period. 7.Performance Management 4 .00 Section 4 . Operational State: Indicates whether performance monitoring is operational. Select the required granularity Click Refresh to update the window data Alcatel 1353NM Alcatel 1353NM rel. Current Problem List: Indicates the current UAT (unavailable time) and TCA (threshold crossing alarm) alarms. Select the necessary (in case of AU4 CTP or TU-n CTP) 5. For the display of Ethernet and FEC performance data.4 Operation All rights reserved © 2006. Threshold Table: Indicates which threshold table is assigned to the entity. Module 2 .3 Displaying performance data Displaying the performance data history for single TP Maintenance Applications . Alcatel 3FL41020ACAAWBZZA Edition 1.mm.yyyy hh:mm:ss format Elapsed Time: indicates whether data collection is finished susp: indicates suspect data for which collection errors have occurred during the collection period. the oldest data in the list is overwritten by the new data collected.Page 29 . Alcatel Interval End Time: in dd.4 Operation All rights reserved © 2006.00 Section 4 . Select the menu Port Performance Display History Data 4. Select the required granularity Click Refresh to update the window data Alcatel 1353NM Alcatel 1353NM rel. Select the required POM/SUT (in case of AU4 CTP or TUx CTP) 5. up to 16 data sets can be displayed simultaneously for each counter. All rights reserved © 2006. These values cannot be modified by the user. Select the TP 3.29 From the Equipment view : 1. If the limit of 16 data sets for a granularity of 15 minutes and three data sets for a granularity of 24 hours is reached.Performance Management 4 .2 . In the case of 15-minute entities. 7. the number of data items is three maximum for 24 hour entities. Display the port view of a board 2. Performance Management 4-2- 30 Alcatel 1353NM Alcatel 1353NM rel. Alcatel This page is left blank intentionally All rights reserved © 2006.Blank Page Maintenance Applications . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.Module 2 .00 Section 4 . 7.Page 30 . 2 .4 Operation All rights reserved © 2006. 7.31 Display the current performance data for the TPs started on the last exercise Test the Refresh and Reset button Display the performance data history Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006.Performance Management 4 .00 Section 4 .3 Displaying performance data Exercise Maintenance Applications .Page 31 .Module 2 . Module 2 .4 Operation All rights reserved © 2006.Page 32 . Alcatel 3FL41020ACAAWBZZA Edition 1.Performance Management 4-2- 32 Alcatel 1353NM Alcatel 1353NM rel. 7.00 Section 4 .Blank Page Maintenance Applications . Alcatel This page is left blank intentionally All rights reserved © 2006. Alcatel All rights reserved © 2006.Performance Management 4 . 7.33 4 Performance Reports Alcatel 1353NM Alcatel 1353NM rel.00 Section 4 .2 .Page 33 . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.Module 2 .Maintenance Applications . Diagnosis Performance Data 4 ways to get the generated report: from Reporting Criteria. 2. from the Equipment view (EML USM). Mail. then Tools minutes or 1 day 4. 3. from PNM USM. from TMN OSs window.Performance Management 4 . from PNM USM. Tool Diagnose Show Performance Data Diagnose user selection Show Performance Data 15 minutes or 24 hours 15 3.Page 34 .34 4 ways to get the RRC window 1 3 2 4 ways to get the generated report 1.2 . Alcatel Alcatel 1353NM Alcatel 1353NM rel. select a NE in the map.4 Operation 4 ways to get the Report Request Control window: 1. File or Printer All rights reserved © 2006.00 Section 4 . Report Destination section : choose Screen.Module 2 . Screen Mail File Printer Menu in PNM USM 4 Menu in EML USM All rights reserved © 2006. 4.4 Performance Reports Navigation in performance data views Maintenance Applications . Alcatel 3FL41020ACAAWBZZA Edition 1. click on the relevant icon 2. 7. Performance Management 4 . Alcatel 3FL41020ACAAWBZZA Edition 1.Page 35 .2 .00 Section 4 . Alcatel RRC : Report Request Control Set Report period Last Until ….35 Select performance entity(ies) to make a report on them (directly in the list or with the "PE selection window" or with the filter) Set reporting Criteria Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006. (Set to…) Latest Current User Specific (choose the period) Set Report Destination On screen Mail File Printer Set Report Type PM Data – Tabular PM Data – Graphical Delta Counter – Tabular (for Ethernet TPs) Delta Counter – Graphical (for Ethernet TPs) Comparison – Tabular (for Analog PM) Comparison – Graphical (for Analog PM) Reference Value All rights reserved © 2006.Module 2 . 7.4 Performance Reports Navigation in performance data views (RRC view) Maintenance Applications . 36 A Performance Entity is a set of PM TPs.00 Section 4 .4 Performance Reports Performance Entity Selection Maintenance Applications .Module 2 . 7.Performance Management 4 .4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. he can recall this saved selection in order to fasten a further selection and management of the same TP set Alcatel 1353NM Alcatel 1353NM rel. The NM operator can save the selection of several TP’s into a Performance Entity. Then.2 .Page 36 . 00 Section 4 . PE selection name Comments Selected TPs Alcatel 1353NM Alcatel 1353NM rel.Performance Management 4 .37 The operator can save all the selected Performance entities belonging to the Performance entity tree. Alcatel The Operator can delete one or more PEs selection(s) : All rights reserved © 2006.Page 37 .4 Performance Reports Save Performance Entity Selection Maintenance Applications . 7.Module 2 .2 .4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. 7.38 From the Report Request Control window. Alcatel 1353NM Alcatel 1353NM rel.Performance Management 4 .2 . selection of a PE family from the performance entity tree.00 Section 4 . Alcatel All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.Module 2 .4 Performance Reports Performance Entity Selection (PE selection window) Maintenance Applications .Page 38 . Alcatel 3FL41020ACAAWBZZA Edition 1.39 From the Report Request Control window.Page 39 . 7. Alcatel All rights reserved © 2006. performance entities can be filtered selecting the granularity Alcatel 1353NM Alcatel 1353NM rel.00 Section 4 .Performance Management 4 .Module 2 .4 Performance Reports Performance Entity Selection (in the list or with the filter) Maintenance Applications .4 Operation All rights reserved © 2006.2 . Performance Management 4 .Page 40 . then all supported Performance Parameters of those selected Performance Entities will be selected by default.2 . Make all Performance Parameter from ‘Selected to ‘Available’ by click the [<<] button.40 Select Param. Alcatel 3FL41020ACAAWBZZA Edition 1. 7.00 Section 4 .4 Performance Reports Selecting performance parameters Maintenance Applications .Module 2 . Report Request Control Window Alcatel 1353NM Alcatel 1353NM rel. If no Performance Parameters previously selected. Filtering ‘Raw’ or ‘Derived’ parameters by select/deselect [Raw Param] and [Derived Param] check boxes. Click [OK] to apply selections or [Cancel] to discard all selection changes All rights reserved © 2006. other unselected and supported Performance Parameters will be shown in the ‘Available’ list. Make all Performance Parameters from ‘Available’ to ‘Selected’ by the [>>] button. Alcatel One or more Performance Parameters may already be selected. and will be shown in the ‘Selected’ list (if operator didn’t change his Performance Entity selection). : to make a report on selected PEs. Make a Performance Parameter from ‘Selected to ‘Available’ by single select one selected parameter and click the [<] button. The following actions are allowed to manipulate the set of selected Performance Parameters: Make a Performance Parameter from ‘Available’ to ‘Selected’ by single select one available parameter and click the [>] button.4 Operation All rights reserved © 2006. the threshold setting window will provide a button "Delete Threshold" to delete the corresponding threshold bond to a parameter of a certain TP under a certain granularity. All rights reserved © 2006. 7.41 Set Threshold for a certain TP or all TPs.Module 2 . otherwise. In addition. The operator can click one parameter and set its RESET and SET values. the operator can set the direction of one threshold (with the default 'Threshold on Max' value).4 Performance Reports Setting Thresholds Maintenance Applications . then this threshold will apply to all TPs listed in the combo box. no "Delete Threshold" button is displayed.(not mandatory) Define threshold Report Request Control Window Alcatel 1353NM Alcatel 1353NM rel. Alcatel Different threshold setting window will be shown according to different database: If Analog PM tps are selected.4 Operation Select parameter Notify if PM Data exceed the given value Save Apply for all TPs All rights reserved © 2006.Performance Management 4 . Alcatel 3FL41020ACAAWBZZA Edition 1. In "Threshold Setting Window".00 Section 4 . if the operator click the [Apply to all TPs]. if other database's tps are selected.2 . the operator can click [Save] button to save all settings or click [Cancel] button to discard all settings.Page 41 . After setting threshold. this threshold will apply only to the currently selected TP in combo box by default. specify how many reports will be show if one report per PMP. Choose date format in report.Page 42 . If the operator chooses to set presentation options after report generation (i. 2 or 3. Specify whether to show or not threshold value in report. Alcatel Setting the presentation options includes: Setting graphical report scale.e. Alcatel 3FL41020ACAAWBZZA Edition 1. in Report window).Performance Management 4 .2 .4 Performance Reports Setting presentation Options Maintenance Applications .4 Operation All rights reserved © 2006. in RRC window). Choose compact or full report Use end time or start time to mark the reporting periods in the report If the operator chooses to set presentation options before report generation (i.Module 2 . either linear or logarithmic.e. All rights reserved © 2006. 7. Specify whether one report grouping multiple PMPs or one report per PMP.00 Section 4 . the setting will be applied immediately on the report and the report will be changed accordingly. Also.42 Set presentation Options before or after report generation Report Request Control Window Alcatel 1353NM Alcatel 1353NM rel. the setting will be remembered and be applied on the report that to be generated. Specify whether show chart annotation or reference value in report. The number must be 1. Module 2 .Performance Management 4 .2 .00 Section 4 . Alcatel 3FL41020ACAAWBZZA Edition 1.43 1. 7.4 Performance Reports Set reporting Criteria Maintenance Applications .Page 43 . To specify specific Reporting Criteria to direct the contents of a report User selection period Granularity Specifying the report destination Specifying the report type and the report style Report Request Control Window Alcatel 1353NM Alcatel 1353NM rel. 3. Alcatel All rights reserved © 2006. 1 2. 2 3 4 4.4 Operation All rights reserved © 2006. year: last week last month last year 3. the To Date ends at the latest of 31 December 2037.4 Operation All rights reserved © 2006.00 Section 4 . month: . Specifying the Report Type: · Performance Counter Tabular Reports · Performance Counter Graphical Reports · Delta Counter Report. The Last … Until period: The operator can choose from the following options: The ‘To Date and Time’ is entered by the operator manually. week: this hour today 15 minutes 1 hour 24 hours . Graphical or Tabular (for Ethernet TPs) · Comparison Reports. The pre-selected periods are grayed–out. week: .Performance Management 4 .] Maintenance Applications . The From Date starts at the earliest of 1 January 1970.4 Performance Reports Set reporting Criteria [cont. month: . User Selection period: The operator must enter the ’From Date and Time’ and the ’To Date and Time’ manually.Module 2 . The last period: The operator can choose from the following options: · 15min: · hour: · day: · 15min: · hour: · day: · 15min: · hour: · day: last 15 minutes last hour yesterday these 15 minutes . week: . year: . 7. year: this month this year 1 week 1 month 1 year 4.Page 44 . All rights reserved © 2006. Alcatel The Reporting Period can be specified on four ways: 1.2 . month: . Alcatel 3FL41020ACAAWBZZA Edition 1. Tabular or Graphical (for Analog PM TPs) · Reference Value Reports.44 1 3 4 2 Alcatel 1353NM Alcatel 1353NM rel. The current period: The operator can choose from the following options: this week starting with Monday . 2. The ’From Date and Time’ is updated automatically according to the selected period and cannot be modified anymore. Module 2 . 7.45 Report period chosen Select Performance entity(ies) Results Select Performance parameters Alcatel 1353NM Alcatel 1353NM rel.4 Performance Reports Display PCT Report Maintenance Applications . Alcatel 3FL41020ACAAWBZZA Edition 1.Performance Management 4 .00 Section 4 .4 Operation Report view with Tabular choice in the setting presentation option (all entities in one table) All rights reserved © 2006.2 . Alcatel All rights reserved © 2006.Page 45 . Alcatel 3FL41020ACAAWBZZA Edition 1. All rights reserved © 2006.Page 46 .00 Section 4 . 7.Performance Management 4 .4 Performance Reports Display PCT Report [cont. which considers only the rows with at least one counter value exceeding thresholds.Module 2 .2 . then the PCT report will be turned to TCT report.4 Operation All rights reserved © 2006. Chose this menu item again.] Maintenance Applications . and it will be toggled off to return to PCT report.46 Report view when the operator chooses Tabular in the setting presentation option and with one Entity per table (see setting presentation option) Alcatel 1353NM Alcatel 1353NM rel. Alcatel If the operator chose the menu “Option->Show Threshold Crossing Rows Only” on. Performance Management 4 .line chart) Maintenance Applications .4 Performance Reports Display PCG (Graphical Report . Alcatel All rights reserved © 2006.00 Section 4 . 7.2 . Select Performance parameter(s) Alcatel 1353NM Alcatel 1353NM rel.Page 47 .47 Select Performance entity(ies) Select Line or Bar chart Report view when the operator chooses Graphical in the setting presentation option.4 Operation Legenda All rights reserved © 2006.Module 2 . Alcatel 3FL41020ACAAWBZZA Edition 1. Bar chart) Maintenance Applications . Alcatel All rights reserved © 2006.4 Performance Reports Display PCG (Graphical Report .Module 2 .00 Section 4 .2 .4 Operation Legenda All rights reserved © 2006.Page 48 .Performance Management 4 . Alcatel 3FL41020ACAAWBZZA Edition 1.48 Select Performance entity(ies) Select Bar chart Select Performance parameter(s) Alcatel 1353NM Alcatel 1353NM rel. 7. 49 Select Performance entity(ies) Select Line orBar chart Graphical Report view with one Entity per table (see setting presentation option).4 Performance Reports Display PCG (Graphical Report .] Maintenance Applications .Bar chart) [cont. 7. Select Performance parameter(s) Alcatel 1353NM Alcatel 1353NM rel.Performance Management 4 .4 Operation Legend All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel All rights reserved © 2006.Page 49 .Module 2 .00 Section 4 .2 . Page 50 . the forced collection will be ignored. If the forced reading request occurs at the same time as an automatic collection period. The forced collection will be rejected if the request happens in the two minutes following the end of a 15 minute counting period.4 Operation All rights reserved © 2006. Alcatel Forced reading has no effect on the automatic performance counter collection process. Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 4 .4 Performance Reports Forced reading of performance counters Maintenance Applications . 7.Performance Management 4 . All rights reserved © 2006.2 .Module 2 . 1. except that blocks already collected will be collected again.50 Forced reading is used to collect data immediately without waiting for the end of the next collection period Valid only for 15 minutes counters. Display any equipment view 2. Select Configuration collection Performance Forced Performance Alcatel 1353NM Alcatel 1353NM rel. Performance Management 4 .4 Performance Reports Search for a TP Maintenance Applications . Alcatel 3FL41020ACAAWBZZA Edition 1.51 In the RRC window.2 . Alcatel All rights reserved © 2006. 7.Module 2 .Page 51 .00 Section 4 . select the TP or TP group as search root and click on “Search TP Name” or “Search by Value” Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006. Alcatel During the search. resume and restart search. operator can pause.2 .Page 52 . Click the “Start” button to start search. Optional: Print found items. the found items will be filled into the result list. During the search.Performance Management 4 .4 Operation Select the TP type Select the NE type Start the search All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. Optional: Make found items selected in the performance entity tree in RRC window (navigate to network tree). Search root must be defined before opening the window Optionally define the Name Pattern (substring of TPs) using * as wild character Results are displayed in this area Alcatel 1353NM Alcatel 1353NM rel.Module 2 .00 Section 4 . All rights reserved © 2006.52 Define the search conditions or use the profile function to load saved search conditions. 7.4 Performance Reports Search for a TP by name and type Maintenance Applications . Click the “Start” button to start search. Optional: Make found items selected in the performance entity tree in RRC window (navigate to network tree).Module 2 .53 Locate quality degraded TP Define the search conditions or use the profile function to load saved search conditions.00 Section 4 .2 .4 Operation Start the search All rights reserved © 2006. All rights reserved © 2006. Search root must be defined before opening the window Select value(s) Results are displayed in this area Alcatel 1353NM Alcatel 1353NM rel. operator can pause. Alcatel During the search. resume and restart search. Alcatel 3FL41020ACAAWBZZA Edition 1. 7. Optional: Print found items.Performance Management 4 . the found items will be filled into the result list. During the search.Page 53 .4 Performance Reports Search for a TP by Value Maintenance Applications . Alcatel This page is left blank intentionally All rights reserved © 2006.00 Section 4 . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 2 .Performance Management 4-2- 54 Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006.Page 54 .Blank Page Maintenance Applications . 7. 2 . Alcatel All rights reserved © 2006.Performance Management 4 .4 Performance Reports Exercise Maintenance Applications .55 Force counters collection Display the performance data for TPs started in the previous exercise graphical report textual report Locate TPs with errors detected Create a Performance Entity corresponding to the TPs previously started Delete the Network Entity Alcatel 1353NM Alcatel 1353NM rel.Module 2 .Page 55 . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 4 . 7.4 Operation All rights reserved © 2006. Page 56 .00 Section 4 .Module 2 . Alcatel 3FL41020ACAAWBZZA Edition 1.2 . Alcatel All rights reserved © 2006.56 End of Module Performance Management Alcatel 1353NM Alcatel 1353NM rel.Performance Management 4 .4 Operation All rights reserved © 2006.Maintenance Applications . 7. Module 1 .Section 5 Administration features Module 1 Administration for operators 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.Page 1 .00 Section 5 . 7. Alcatel All rights reserved © 2006.00 Alcatel 1353NM . Alcatel 3FL41020ACAAWBZZA Edition 1.Alcatel 1353NM rel. 4 Operation All rights reserved © 2006.00 Section 5 .Module 1 . Alcatel 3FL41020ACAAWBZZA Edition 1.Page 2 . Alcatel This page is left blank intentionally Document History Edition 01 Date 2007-02-07 Author Sangalli Roberto Remarks First edition All rights reserved © 2006.Blank Page Administration features .Administration for operators 5-1-2 Alcatel 1353NM Alcatel 1353NM rel. 7. Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.Objectives Administration features .Administration for operators 5-1-3 Objective: To be able to perform the basic administration tasks in operator field Alcatel 1353NM Alcatel 1353NM rel. Alcatel All rights reserved © 2006.Page 3 .Module 1 . 7.00 Section 5 . 4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 . Alcatel This page is left blank intentionally All rights reserved © 2006.] Administration features .Administration for operators 5-1-4 Alcatel 1353NM Alcatel 1353NM rel.Objectives [cont. 7.Page 4 .00 Section 5 . Table of Contents Administration features .4 Operation All rights reserved © 2006.Page 5 . Alcatel All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 5 .Module 1 .Administration for operators 5-1-5 Switch to notes view! 1 List of Administration Functions 2 Managing Personal Settings 3 Command Log Viewer Page 7 9 15 Alcatel 1353NM Alcatel 1353NM rel. 7. 4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel This page is left blank intentionally All rights reserved © 2006.] Administration features .Page 6 .Administration for operators 5-1-6 Switch to notes view! Alcatel 1353NM Alcatel 1353NM rel.Table of Contents [cont. 7.00 Section 5 .Module 1 . Alcatel All rights reserved © 2006.Administration for operators 5-1-7 1 List of Administration Functions Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006.00 Section 5 .Administration features . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 . 7.Page 7 . Alcatel 3FL41020ACAAWBZZA Edition 1. close a session Trace & log management view and back up process traces view and back up log files (events.Page 8 .Administration for operators 5-1-8 1353NM administration is conducted mainly using the System Management Features (SMF) application and "Global actions" SMF lets you perform Operators administration Trace & log management Backup & restore Failure management Scheduler management PMDS DB Administration Cleanup Management There are different access levels according to the user profile and the terminal used for the connection Alcatel 1353NM Alcatel 1353NM rel. 7. Alcatel Operators administration add/remove operators. SMF) Backup & restore back up and restore application data Failure management System Snapshot view Scheduler management To schedule different actions PMDS management To Manage the performance monitoring data base Cleanup Management To suppress useless files All rights reserved © 2006.00 Section 5 . user commands.1 List of administration functions SMF Administration features .Module 1 . list connected operators.4 Operation All rights reserved © 2006. 7.00 Section 5 .Page 9 . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 .4 Operation All rights reserved © 2006. Alcatel All rights reserved © 2006.Administration features .Administration for operators 5-1-9 2 Managing Personal Settings Alcatel 1353NM Alcatel 1353NM rel. Alcatel All rights reserved © 2006.10 Enter the old password Enter the new password The shortest way to change the password.1 . 7.Module 1 .Administration for operators 5 . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 5 .Page 10 .4 Operation All rights reserved © 2006.2 Managing personal settings Changing your password Administration features . select : Global Actions Confirm OK change password Alcatel 1353NM Alcatel 1353NM rel. Alcatel All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. 7.11 Global Action printer Set Personal Select the printer Close the session and re-open it Apply Alcatel 1353NM Alcatel 1353NM rel.Module 1 .Administration for operators 5 .4 Operation All rights reserved © 2006.Page 11 .2 Managing personal settings Selecting the printer Administration features .00 Section 5 .1 . Alcatel 3FL41020ACAAWBZZA Edition 1.00 Section 5 .Page 12 . Alcatel This page is left blank intentionally All rights reserved © 2006. 7.Module 1 .Blank Page Administration features .4 Operation All rights reserved © 2006.Administration for operators 5-1- 12 Alcatel 1353NM Alcatel 1353NM rel. 4 Operation All rights reserved © 2006.Exercise Administration features .00 Section 5 .Page 13 .13 Change your password Set a default printer Alcatel 1353NM Alcatel 1353NM rel. 7.Administration for operators 5 . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 . Alcatel All rights reserved © 2006.1 . Module 1 .Blank Page Administration features .Administration for operators 5-1- 14 Alcatel 1353NM Alcatel 1353NM rel. Alcatel 3FL41020ACAAWBZZA Edition 1. 7.4 Operation All rights reserved © 2006.00 Section 5 . Alcatel This page is left blank intentionally All rights reserved © 2006.Page 14 . 4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 . 7.Page 15 .15 3 Command Log Viewer Alcatel 1353NM Alcatel 1353NM rel.Administration features .1 .00 Section 5 . Alcatel All rights reserved © 2006.Administration for operators 5 . Module 1 .1 .4 Operation All rights reserved © 2006. Alcatel 3FL41020ACAAWBZZA Edition 1. Step 1: open the CLV (Actions Command Log Viewer). the range of date shows the operator only the dates on which operations have been made. 7.3 Command log viewer How to proceed Administration features . For simple filters. select a log and click on Parse Step 2: after the log is parsed. Alcatel All rights reserved © 2006.Administration for operators 5 . the variable content depends on the content of the parsed file. the operator can apply filters to extract the required information.00 Section 5 . Alcatel 1353NM Alcatel 1353NM rel.Page 16 . For example. Simple and advanced filters are provided. Select the query panel and create a filter (simple or complex). The set of logs provided depends on the server on which the user is working: the set of usm logs on the master can be different from the set on the client and has a different content.16 The command log viewer permits to check the content of the command log files (EMLUSM and PNMUSM). 17 Click on Parse Alcatel 1353NM Alcatel 1353NM rel.00 Section 5 . Alcatel 3FL41020ACAAWBZZA Edition 1.4 Operation All rights reserved © 2006.3 Command log viewer Step 1: select the log Administration features . Alcatel All rights reserved © 2006.Module 1 .1 . 7.Administration for operators 5 .Page 17 . 00 Section 5 .3 Command log viewer Step 2: create a simple filter Administration features .18 Query Panel : two types of filters are provided : Simple or advanced 1.4 Operation 3.1 . Alcatel 3FL41020ACAAWBZZA Edition 1.Insert the filter name and click on OK All rights reserved © 2006. Click on save 4.Administration for operators 5 .Create a simple filter by selecting: • Operator • Machine • Entity (the equipment) • Date • Command provided 2. 7. Alcatel All rights reserved © 2006.Module 1 . Click on Apply Alcatel 1353NM Alcatel 1353NM rel.Page 18 . 7.3 Command log viewer Filtering result Administration features .Administration for operators 5 .4 Operation All rights reserved © 2006.19 Alcatel 1353NM Alcatel 1353NM rel.Page 19 .1 . Alcatel All rights reserved © 2006.Module 1 .00 Section 5 . Alcatel 3FL41020ACAAWBZZA Edition 1. Module 1 .20 Each row of the table represents a single logical condition made up by a subject (Variable). Alcatel 3FL41020ACAAWBZZA Edition 1. Several logical conditions can be set by Boolean operators and grouped by round brackets.1 .Page 20 . Alcatel 1353NM Alcatel 1353NM rel.3 Command log viewer Complex filters Administration features . 7.4 Operation All rights reserved © 2006. relational operator (Compare to) and a value of comparison (Value). Alcatel All rights reserved © 2006.Administration for operators 5 .00 Section 5 . Alcatel All rights reserved © 2006. save the filter and apply (as for simple filters) Variable Compare to Operator Alcatel 1353NM Alcatel 1353NM rel.Page 21 .4 Operation All rights reserved © 2006.Administration for operators 5 . Alcatel 3FL41020ACAAWBZZA Edition 1.21 Once created. 7.Module 1 .3 Command log viewer Complex filters Administration features .00 Section 5 .1 . 00 Section 5 . 7. Alcatel This page is left blank intentionally All rights reserved © 2006.Administration for operators 5-1- 22 Alcatel 1353NM Alcatel 1353NM rel.Module 1 .Blank Page Administration features .4 Operation All rights reserved © 2006.Page 22 . Alcatel 3FL41020ACAAWBZZA Edition 1. Alcatel 3FL41020ACAAWBZZA Edition 1.23 Switch to notes view! A Access Control Domain ACD ACKnowledged ACK Automatic Connection Management ACM Association Control Service Element ACSE Add and Drop Multiplexer ADM Authority Format Identifier AFI Alarm Indication Signal AIS ALcatel Management Platform ALMAP Automatic Laser Shutdown ALS Alcatel Network Timing Protocol ANTP Access Point AP Application Procedure Interface API APMAN Application Process Management Automatic Protection Switching APS Application Registration Files ARF Alarm Surveillance AS Application Registration Files ARF Alarm Surveillance AS Alarm Severity Assignment Profile ASAP Asynchronous Transfer Mode ATM Administrative Unit AU AU PJC Administrative Unit Pointer Justification Counter Alcatel 1353NM Alcatel 1353NM rel. DDS2. 7. Alcatel Elementary Topology Bit Error Rate Backbone Network Client Access Point Common Desktop Environment Compact Disc Read Only Memory Carrier Ethernet Transport Platform Communication infrastructure Clear Connection Less Network Protocol Connection Less Network Service Common Management Information Service Common Management Information Service Element Common Management Info Protocol on TCP/IP C++ Object Management Extended Toolchain Common Object Request Broker Architecture Comma Separated Values Craft Terminal Connection Termination Point Functional Access Domain Far End Received Failure Frame Loss Second Fault Management Fiber optic Extender File Transfer Protocol Guidelines for the Definition of Managed Objects Greenwich Meridian Time Gateway Network Element Graphical User Interface Data Base Management System Data Communication Channel Data Communication Network Human Machine Interface Higher Order High Order Assembler High Order Access Points Higher Order Path Layer High Order Path Layer Network High Order Path Adaptation High Order Path Connection High order Path Termination Hyper Text Tranfer Protocol Higher order Virtual Container All rights reserved © 2006.Abbreviations and Acronyms Administration features .1 .4 Operation DDS DM DNM DS DVD DXC E ECC ECT EFD ELM EM EML EM-OS EMS ENE EPS ES ESCT ES-IS ESN ET F FAD FERF FLS FM FOX FTP G GDMO GMT GNE GUI H HMI HO HOA HO-AP HOPL HOP-LN HPA HPC HPT HPPT HVC Digital Data Storage (DDS1.00 Section 5 . DDS4) Distributed Management Distributed Network Maps Degraded Signal Digital Versatile Disk Digital Cross-Connect B BER BN C CAP CDE CD-ROM CETP CI CLR CLNP CLNS CMIS CMISE CMOT COMET CORBA CSV CT CTP D DBNS DCC DCN Embedded Communication Channels Equipment Craft Terminal Event Forward Discriminator Events & Log Management Element Manager Element Management Layer Element Manager – Operation System Event Management Service Equivalent Network Element Equipment Protection Switching End System Equipment and Shelf ConTroller End System to Intermediate System Elementary Subnetwork All rights reserved © 2006.Module 1 .Administration for operators 5 . DDS3.Page 23 . Alcatel 3FL41020ACAAWBZZA Edition 1.Module 1 .24 I IAP IDI IEEE Switch to notes view! Inventory APplication Initial Domain Identifier Institute of Electrical and Electronics Engineers Information Manager Interface OS to OS Internet Protocol Intermediate System Integrated Service Adapter Intermediate System to Intermediate System NFS NM NML NN NNM NR NRSV NSAP NTP O OCT OFS OH OMSN ORS OS OSI OSPF P PCMAP PDH PDU PERF PERL PI PM PMD PMV PNM POH PPI PRTP PTM Q Q3 QECC R RAP RIP RECT RM ROSE RS RST RSV Network File System Network Manager Network Management Layer National Network Network Node Manager Network Release Not ReSerVed Network Service Access Point Network Timing Protocol IM IOO IP IS ISA IS-IS L Local Area Network LAN LAP Link Access Protocol LAPD Link Access Protocol on D channel LC Link Connection LLC Logical Link Control LO Lower Order LO-AP Low Order Access Point LOF Loss Of Frame LOP Loss Of Pointer LOPL Low Order Path Layer Alcatel 1353NM LOP-LN Low rel.1 .Abbreviations and Acronyms [cont. Order Path Layer Network Alcatel 1353NM 7.Administration for operators 5 .] Administration features . Alcatel Plesiochronous Digital Hierarchy Protocol Data Unit PERFormance Management Practical Extraction and Report Language Physical Interface Performance Monitoring Postmaster Daemon Performance Monitoring Visualisation Physical Network Management Path Overhead PDH Physical Interface Pure TRansport Platform Path Trace Mismatch CMISE Q3 OPTICS-IM based management interface Q Embedded Communication Channel Not ACKnowledged Network Access Domain Network Access Point NAVigation Not Clear Network Element Network Equipment Craft Terminal Application Software Reachable address Prefix Routing Information Protocol Remote Craft Terminal Regional Manager Remote Operation Service Element Regeneration Section Regeneration Section Termination Reserved All rights reserved © 2006.00 Section 5 .Page 24 .4 Operation LOS Loss Of Signal LOT Loss Of Tributary LPA Lower Order Path Adaptation LPC Local Process Controller LPC Lower Order Path Connection LPT Lower Order Path Termination LRF Local registration files LTS Line Transmission System LVC Lower Order Virtual Container M MAC MESA MIB MS MS-AP MS-TP MSL MS-LN MSP MSPP MST N NACK NAD NAP NAV NCLR NE NECTAS Office Craft Terminal Out of Frame Seconds Over Head Optinex Multi Service Node Object Registration Service Operation System Open System Interconnexion Open Shortest Path First Media Access Control Manual End System Adjacency Management Information Base Multiplex Section Multiplex Section Access Point Multiplex Section Termination Point Multiplex Section layer Multiplex Section Layer Network Multiplex Section Protection MultiService Provisioning Platform Multiplex Section Termination Payload Configuration Management Application All rights reserved © 2006. Page 25 .Administration for operators 5 .1 . Alcatel User Datagram Protocol Unidirectional Path Switched Rings User Service Manager Virtual Container WorkStation Cross-Connect EXternal Communication Control All rights reserved © 2006.Abbreviations and Acronyms [cont. Alcatel 3FL41020ACAAWBZZA Edition 1. 7.00 Section 5 .4 Operation TF Transmit Fail T-FEP TSD Front End Processor TFTP Trivial File Transfer Protocol TM Terminal Mode TMN Telecommunications Management Network TN Telecommunications Network TP Termination Point TSS Transport Service Switch TTP Trail Termination Point TU Tributary Unit TU PJC Tributary Unit Pointer Justification Counter U UDP UPSR USM V VC W WS X XC XCC All rights reserved © 2006.Module 1 .25 Switch to notes view! S SA Section Adaptation SBN SuBNetwork SCSI Small Computer Serial Interface SDH Synchronous Digital Hierarchy SEC SECurity SEN Simple Element Network SEN-IM Simple Element Network Information Manager SF Signal Failure SMF System Management Functions SMTP Simple Mail Transfer Protocol SNCP Subnetwork Connection Protection SNML SDH Network Management Layer SNMP Simple Network Management Protocol SOH Section Over Head SPI SDH Physical Interface STM-N Synchronous Transport Module level N SWDL SoftWare DownLoad SWM SoftWare download Management SWS SoftWare Server T Threshold Crossing Alarm TCA Alcatel 1353NM TCP Transmission Control Protocol Alcatel 1353NM rel.] Administration features . 00 Section 5 . Alcatel 3FL41020ACAAWBZZA Edition 1.26 End of Module Administration for operators Alcatel 1353NM Alcatel 1353NM rel.4 Operation All rights reserved © 2006. 7.Module 1 . Alcatel All rights reserved © 2006.Administration for operators 5 .Page 26 .1 .Administration features . Alcatel .1 Page 1 @@COURSENAME This page is left blank intentionally All rights reserved © 2005. Alcatel .2 Page 2 @@COURSENAME All rights reserved © 2005.