a-LIFE2_0102_1004_201306_EN rev05_(260)

Climaveneta Technical BulletinA_LIFE2_0102_1004_201306_EN a-LIFE2 0102 ÷ 1004 1,5 ÷ 7,5 kW Fan-coil for professional applications, with cabinet or built-in version (The photo of the unit is purely indicative and may vary depending on the model) Configuration User frendly Full integration < Real savings < < < a-LIFE2 SUMMARY 1. RANGE 3 2. GENERAL DEsCRiPTioN 4 3. ACCEssoRiEs CoMPATiBiLiTY 6 4. UNiT DEsCRiPTioN 8 5. oPERATiNG LiMiTs 9 6. TEChNiCAL DATA shEET 10 7. FAN PERFoRMANCEs 16 8. PREssURE DRoP 20 9. CoRRECTioN FACToRs iN CooLiNG oPERATioN WiTh GLYCoL WATER 22 10. CoRRECTioN FACToRs iN hEATiNG oPERATioN WiTh GLYCoL WATER 23 11. soUND PREssURE LEVEL 24 12. soUND PoWER LEVEL 24 13. FANCoiL CoNTRoLs 25 14. ACCEssoRiEs 31 15. DiMENsioNAL DATA AND WATER CoNNECTioNs 48 16. ELECTRiCAL CoNNECTioNs 53 This company participates in the Eurovent Certifi cation Programme. The products are listed in the Directory of certifi ed products. Eurovent certifi cation applied to units with cooling capacity up to 1500 kW for air cooled water chillers and water cooled liquid chillers. Waiver of liability This publication represents the sole property of Climaveneta. Any reproduction or disclosure of such is strictly prohibited without the written authorisation of Climaveneta. This document has been prepared with maximum care and attention paid to the content shown. Nonetheless, Climaveneta waives all liability deriving from the use of such document. Read this document carefully. All work must be performed, components selected and materials used professionally and in complete accordance with the legislation in force in material in the country concerned, and considering the operating conditions and intended uses of the system, by qualified personnel. The data contained in this publication may be changed without prior notice. 2 A_LIFE2_0102_1004_201306_EN a-LIFE2 1. RANGE WITh cABINET ModEL a-LIFE2 dLMV/dLMo version with cabinet, low air intake a-LIFE2 dFMV/dFMo version with cabinet, front air intake 100 mm 100 mm Vertical wall mounted horizontal ceiling installation Vertical wall mounted horizontal ceiling installation BUILT-IN ModEL a-LIFE2 dLIo/dLIV built-in version, low air intake a-LIFE2 dFIV/dFIo built-in version, front air intake 100 mm 100 mm Vertical wall mounted horizontal ceiling installation Vertical wall mounted 3 horizontal ceiling installation A_LIFE2_0102_1004_201306_EN a-LIFE2 2. GENERAL dEScRIPTIoN Fan Coil is a terminal unit for air conditioning during summer (cooling) and winter (heating). a-LiFE2 is provided with centrifugal fan, double intake and forward blades, powered by auto-trasformer with 6 speeds of which 3 are factory-set. other speeds may be requested on the order by the customer. output from 1,5 kW - 7,5 kW. Standard water fittings, reversible on site. Available in 10 different versions with centrifugal fans, suitable for use in the tertiary sector and for small ducted installations. structure made in metal panel, with inlet and outlet plastic grilles. Available controls Ps, MT, AT and EK, iK with use of hB power board Available wall mounted controls: PsW, MTW, ATW and EKW, iK with use of hB Power Board. Air filter on all models. a-LIFE2 dLMV version with cabinet, low air intake, vertical installation a-LIFE2 dLMo version with cabinet, low air intake, horizontal installation a-LIFE2 dFMV version with cabinet, front air intake, vertical installation a-LIFE2 dFMo version with cabinet, front air intake, horizontal installation a-LIFE2 dLIV built-in version, low air intake, vertical installation a-LIFE2 dLIo built-in version, low air intake, horizontal installation a-LIFE2 dFIV built-in version, front air intake, vertical installation a-LIFE2 dFIo built-in version, front air intake, horizontal installation 1 2 3 4 5 6 7 8 9 10 11 Casing made from galvanised and coated sheet metal with ABs front intake grill on versions DFMo/DFMV (1’), and without grill on versions DLMo/DLMV (1) Load-bearing structure made from thick galvanised sheet metal, with holes for wall/ceiling mounting + thermal insulation and soundproofing on the inside (class M1) Centrifugal fan with double-sided intake Electric motor coupled directly to the fan heat exchanger coil (1 coil for 2-pipe units; 2 coils for 4-pipe units) Coil water connections Manual air vent valve Manual water drain valve Condensate collection pan with drains + thermal insulation Condensate drain Air filter (filtration grade G2) 4 A_LIFE2_0102_1004_201306_EN a-LIFE2 2. GENERAL dEScRIPTIoN LiFE2 DLMV version with cabinet, low air intake, vertical installation LiFE2 DLMo version with cabinet, low air intake, horizontal installation LiFE2 DFMV version with cabinet, front air intake, vertical installation LiFE2 DFMo version with cabinet, front air intake, horizontal installation LiFE2 DLiV built-in version, low air intake, vertical installation LiFE2 DLio built-in version, low air intake, horizontal installation LiFE2 DFiV built-in version, front air intake, vertical installation LiFE2 DFio built-in version, front air intake, horizontal installation dimensions Built-in version dLIV 0102-0104 dLIV 0202-0204 dLIV 0302-0304 dLIV 0402-0404 dLIV 0502-0504 dLIV 0602-0604 dLIV 0702-0704 dLIV 0802-0804 dLIV 0902-0904 dLIV 1002-1004 L (mm) h (mm) s (mm) 450 450 215 450 450 215 650 450 215 650 450 215 850 450 215 850 450 215 1050 450 215 1050 450 215 1250 450 215 1250 450 215 Built-in version dLIo 0102-0104 dLIo 0202-0204 dLIo 0302-0304 dLIo 0402-0404 dLIo 0502-0504 dLIo 0602-0604 dLIo 0702-0704 dLIo 0802-0804 dLIo 0902-0904 dLIo 1002-1004 L (mm) h (mm) s (mm) 545 450 215 545 450 215 745 450 215 745 450 215 945 450 215 945 450 215 1145 450 215 1145 450 215 1345 450 215 1345 450 215 With cabinet version dLMV 0102-0104 dLMV 0202-0204 dLMV 0302-0304 dLMV 0402-0404 dLMV 0502-0504 dLMV 0602-0604 dLMV 0702-0704 dLMV 0802-0804 dLMV 0902-0904 dLMV 1002-1004 L (mm) h (mm) s (mm) 922 499 233 922 499 233 1112 499 233 1112 499 233 1302 499 233 1302 499 233 1492 499 233 1492 499 233 1682 499 233 1682 499 233 With cabinet version dLMo 0102-0104 dLMo 0202-0204 dLMo 0302-0304 dLMo 0402-0404 dLMo 0502-0504 dLMo 0602-0604 dLMo 0702-0704 dLMo 0802-0804 dLMo 0902-0904 dLMo 1002-1004 L (mm) h (mm) s (mm) 922 499 233 922 499 233 1112 499 233 1112 499 233 1302 499 233 1302 499 233 1492 499 233 1492 499 233 1682 499 233 1682 499 233 5 A_LIFE2_0102_1004_201306_EN CoiL 1/2" 3P2V LiFE2 √ √ √ √ √ √ √ √ KiT VALV ADD. LiFE2 √ √ √ √ KiT VALV MAiN CoiL 1/2" oN/oFF 2V LiFE2 √ √ √ √ √ √ √ √ KiT VALV MAiN CoiL 1/2" PWM 2V LiFE2 √ √ √ √ √ √ √ √ KiT VALV MAiN CoiL 3/4" oN/oFF 2V LiFE2 √ √ √ √ √ √ √ √ KiT VALV MAiN CoiL 3/4" PWM 2V LiFE2 √ √ √ √ √ √ √ √ KiT VALV MAiN CoiL 1/2" 3P LiFE2 √ √ √ √ √ √ √ √ KiT VALV MAiN CoiL 3/4" 3P LiFE2 √ √ √ √ √ √ √ √ KiT VALV MAiN CoiL 1/2" 0-10V LiFE2 √ √ √ √ √ √ √ √ KiT VALV MAiN CoiL 3/4" 0-10V 2V LiFE2 √ √ √ √ √ √ √ √ KiT VALV MAiN CoiL 1/2" oN/oFF 3V LiFE2 √ √ √ √ √ √ √ √ KiT VALV MAiN CoiL 1/2" PWM 3V LiFE2 √ √ √ √ √ √ √ √ KiT VALV MAiN CoiL 3/4" oN/oFF 3V LiFE2 √ √ √ √ √ √ √ √ KiT VALV MAiN CoiL 3/4" PWM 3V LiFE2 √ √ √ √ √ √ √ √ KiT VALV MAiN CoiL 1/2" 3P3V LiFE2 √ √ √ √ √ √ √ √ KiT VALV MAiN CoiL 3/4" 3P3V LiFE2 √ √ √ √ √ √ √ √ KiT VALV MAiN CoiL 1/2" 0-10V 3V LiFE2 √ √ √ √ √ √ √ √ KiT VALV MAiN CoiL 3/4" 0-10V 3V LiFE2 √ √ √ √ √ √ √ √ KiT VALV ADD. CoiL 0-10V 3V LiFE2 √ √ √ √ √ √ √ √ WATER KiT FoR 3-WAYs 3/4" AND 2 BALL VALVE √ √ √ √ √ √ √ √ WATER KiT FoR 2-WAYs 3/4 AND 2 BALL VALVE √ √ √ √ √ √ √ √ WATER KiT FoR 3-WAYs 1/2" AND 2 BALL VALVE √ √ √ √ √ √ √ √ WATER KiT FoR 2-WAYs 1/2” AND 2 BALL VALVE √ √ √ √ √ √ √ √ MANUAL DAMPER FoR BUiLT-iN UNiTs LiFE2 √ √ √ √ MoT. CoiL 1/2" PWM 2V LiFE2 √ √ √ √ √ √ √ √ KiT VALV ADD. LiFE2 √ √ √ √ AUXiLiARY CoNDENsATE TRAY hoRiZ. CoiL 0-10V 2V LiFE2 √ √ √ √ √ √ √ √ KiT VALV ADD. DAMPER FoR WiTh CABiNET UNiTs √ MANUAL DAMPER FoR WiTh CABiNET UNiTs √ DAMPER MoToR LiFE2 √ 6 A_LIFE2_0102_1004_201306_EN . CoiL 1/2 oN/oFF 3V LiFE2 √ √ √ √ √ √ √ √ KiT VALV ADD.200/180/160 (iNLET) √ √ √ √ PLENUM KiT LiFE2 CiRCULAR 1XD.a-LIFE2 3. DAMPER FoR BUiLT-iN UNiTs LiFE2 √ √ √ √ √ √ √ √ MoT. CoiL 1/2" oN/oFF 2V LiFE2 √ √ √ √ √ √ √ √ KiT VALV ADD.200/180/160 (oUTLET) √ √ √ √ √ √ √ √ √ √ √ √ √ √ ELECTRiCAL hEATER TERMiNAL MAMUT iP20 √ √ AUXiLiARY CoNDENsATE TRAY VERTiCAL iNsT. AccESSoRIES coMPATIBILITY a-LIFE2 description dFMo dLMo dFMV dLMV dFIo dLIo dFIV dLIV AiR iNLET GRiLLE + FiLTER LiFE2 √ √ √ √ AiR oUTLET GRiLLE + FiLTER LiFE2 √ √ √ √ PLENUM KiT LiFE2 iNLET AiR 90° √ √ PLENUM KiT LiFE2 oUTLET AiR 90° √ √ √ √ PLENUM KiT LiFE2 sTREiGhT oUTLET √ √ √ √ PLENUM KiT LiFE2 sTREiGhT iNLET √ √ √ √ PLENUM KiT LiFE2 CiRCULAR 1XD. CoiL 1/2" PWM 3V LiFE2 √ √ √ √ √ √ √ √ KiT VALV ADD. iNsT. CoiL 1/2" 3P3V LiFE2 √ √ √ √ √ √ √ √ KiT VALV ADD. a-LIFE2 3. AccESSoRIES coMPATIBILITY a-LIFE2 description dFMo dLMo dFMV dLMV dFIo AiR iNLET GRiLL FoR WiTh CABiNET UNiTs √ dLIo dFIV dLIV √ √ √ √ EsTETiCAL AND sTRUTURAL FEEDs √ √ √ √ KiT ADDiTioNAL CoiL 1 RoW √ √ √ √ CLosURE PANELs LiFE2 √ √ √ √ √ KiT LiFE2 BoX √ KiT CoNTRoL MT CLiMAVENETA LiFE2 KiT REMoTE CoNTRoL PsW CLiMAVENETA LiFE2 √ √ KiT CoNTRoL MT CLiMAVENETA LiFE2 KiT REMoTE CoNTRoL REMoTo MTW CLiMAVENETA LiFE2 √ √ KiT CoNTRoL AT MoDBUs CLiMAVENETA LiFE2 KiT REMoTE CoNTRoL ATW MoDBUs CLiMAVENETA LiFE2 √ √ √ √ KiT CoNTRoL EK CLiMAVENETA LiFE2 KiT REMoTE CoNTRoLD REMoTo EKW CLiMAVENETA LiFE2 KiT CoNTRoL iK CLiMAVENETA LiFE2 CARBoN FiLTER LiFE2 DFMo/V √ CARBoN FiLTER LiFE2 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ KiT PoWE BoARD LiFE2 hB √ √ √ √ √ √ √ √ KiT Rs485 LiFE2 √ √ √ √ √ √ √ √ KiT EsPANsioNE VALV. 3PUNTi LiFE2 √ √ √ √ √ √ √ √ KiT BUs ADAPTER √ √ √ √ √ √ √ √ KiT GATEWAY BiTiCiNo √ √ √ √ √ √ √ √ KiT sPB FoR MULTRiPLE CoNNECTioNs √ √ √ √ √ √ √ √ KiT FLEssiBLE TUBEs LiFE2 √ √ √ √ √ √ √ √ 7 A_LIFE2_0102_1004_201306_EN . 0-10VDC LiFE2 √ √ √ √ √ √ √ √ KiT EsPANsioNE VALV. 100% tested with dried air.a-LIFE2 4. Unit fitted with condensate collection pan made from insulated galvanised sheet metal for vertical and horizontal installation. Quick-fitting controls fixing bracket. heat exchange Coil with corrugated aluminium fins and copper pipes. statically and dinamically balanced and coupled directly to the electric motor. dLMo a-LIFE2 dFMV. The water fittings are provided with anti-torsion lock with air vent and water drainage. Unit fitted with condensate collection pan made from insulated galvanised sheet metal for vertical and horizontal installation. 8 A_LIFE2_0102_1004_201306_EN . Powered by auto-trasformer with 6 speeds of which 3 are factory-set. dFMo covering cabinet Comprising components made from ABs for the sides and outlet grills (adjustable by 180°) and thick coated sheet metal for the front panel. Terminal block for power and control connections with screw terminals for remote controls. UNIT dEScRIPTIoN a-LIFE2 dLMV. Fan motor Double intake centrifugal fans. statically and dinamically balanced and coupled directly to the electric motor. Comprising components made from ABs for the sides and outlet grills (adjustable by 180°) and thick coated sheet metal for the front panel. heat exchange Coil with corrugated aluminium fins and copper pipes. Protective flap for controls in ABs with tamperproof fixing screw in conformity with directive EN iso 60335-2-40 in relation to amendment A1 concerning the automatic closure of the flap and protection of electrical controls against spillage of water. insulated with self-extinuishing Class 1heat insulating panels. The water fittings are provided with anti-torsion lock with air vent and water drainage. Air filter Made of metal frame and hosting the filtering material. covering cabinet Comprising components made from ABs for the sides and outlet grills (adjustable by 180°) and thick coated sheet metal for the front panel. Fan motor Double intake centrifugal fans. Terminal block for power and control connections with screw terminals for remote controls. insulated with self-extinuishing Class 1heat insulating panels. classification G2. easily convertible into right-hand by simply turning the coil. easily convertible into right-hand by simply turning the coil. 100% tested with dried air. classification G2. Powered by auto-trasformer with 6 speeds of which 3 are factory-set. All units are delivered with left-hand water connections. All units are delivered with left-hand water connections. Easily removable intake grille/filter by the ¼ turn screws. Air filter Made of metal frame and hosting the filtering material. Protective flap for controls in ABs with tamperproof fixing screw in conformity with directive EN iso 60335-2-40 in relation to amendment A1 concerning the automatic closure of the flap and protection of electrical controls against spillage of water. Bearing structure Galvanised steel frame with high rust resistance. Quick-fitting controls fixing bracket Bearing structure Galvanised steel frame with high rust resistance. Wall mounted controls are fixed by screws. Unit fitted with condensate collection pan made from insulated galvanised sheet metal per the horizontal and vertical installation. All units are delivered with left-hand water connections. easily convertible into right-hand by simply turning the coil. The filter removal requires a tool as safety measure (according with anti-tamper regulation). insulated with self-extinuishing Class 1heat insulating panels. heat exchange Coil with corrugated aluminium fins and copper pipes.a-LIFE2 4. statically and dinamically balanced and coupled directly to the electric motor. Wall mounted controls are fixed by screws. Powered by auto-trasformer with 6 speeds of which 3 are factory-set. Filter removal is completely safe. heat exchange Coil with corrugated aluminium fins and copper pipes. dFIV Bearing structure Galvanised steel frame with high rust resistance. The water fittings are provided with anti-torsion lock with air vent and water drainage. UNIT dEScRIPTIoN a-LIFE2 dLIo. Fan motor Double intake centrifugal fans. The water fittings are provided with anti-torsion lock with air vent and water drainage. easily convertible into right-hand by simply turning the coil. Double terminal block for power and control connections with quick connector for plug-in controls. 21 23 25 27 29 31 15 3 3 3 3 3 3 17 3 3 3 3 3 3 19 3 3 3 3 3 3 21 6 5 4 3 3 3 23 - 8 7 7 5 5 FAcToRY-SET SPEEd a-LiFE2 is provided with centrifugal fan. Maximum working pressure: 80°C 15 bar Minimum room air temperature: Maximum room air temperature 0°C 45°C Minimum average water temperature: The limits specified above refer to operation with the fan at minimum speed. other speeds may be selected on request in the order. Unit fitted with condensate collection pan made from insulated galvanised sheet metal for horizontal and vertical installation. During extended periods in which the fan is off and of cold water is flowing through the coil. 100% tested with dried air. All units are delivered with left-hand water connections. classification G2. consequently. 100% tested with dried air. statically and dinamically balanced and coupled directly to the electric motor. Double terminal block for power and control connections with quick connector for plug-in controls. 9 A_LIFE2_0102_1004_201306_EN . insulated with self-extinuishing Class 1heat insulating panels. condensate may form on the outside of the appliance. dLIV a-LIFE2 dFIo. the three-way valve should be installed. and is simplified by turning the guides at the side to release the filter. Air filter Made of metal frame and hosting the filtering material. Powered by auto-trasformer with 6 speeds of which 3 are factory-set. 5. dry bulb room temperature °c MINIMUM AVERAGE WATER TEMPERATURE Wet bulb room temperature °c. classification G2. Air filter Made of metal frame and hosting the filtering material. Fan motor Double intake centrifugal fans. powered by auto-trasformer with 6 speeds of which 3 (speed wired standard 2-3-5) are factoryset by Climaveneta. Bearing structure Galvanised steel frame with high rust resistance. oPERATING LIMITS Maximum water inlet temp. 2 6.) from fan front and 1 (m.b.14 0.80 2.02 2.15 4.7 31 40 290 1.1 39 48 640 4.81 1.92 0.75 2.00 1.3 41 50 760 4.84 0.95 0.08 0.4 6.39 0.257 7.0 5.519 7.44 0.6 5.09 1.489 26.00 0. Chilled water (in/out) 7/12°C 2 Room temperature 20°C d.1 45 54 (5) (5) (5) (5) mm mm mm kg 545 215 450 11 545 215 450 12 745 215 450 14 745 215 450 15 945 215 450 20 945 215 450 21 1145 215 450 23 1145 215 450 25 1345 215 450 27 1345 215 450 29 Notes: 1 Room temperature 27°C d.22 0.78 0.17 0.32 0.258 7.530 8.3 39 48 410 2.13 0.18 0.355 14.871 21.40 0.5 6.2 37 46 350 2.59 0.4 5.82 0.09 0.2 37 46 550 3.701 13.89 1.8 6.5 28 37 270 1.878 20.9 42 51 560 3.923 22.0 3.654 12.5 8.06 0.356 16.62 5.06 3.487 24.814 17.41 4.7 45 54 815 4.979 23.15 0.775 18.7 2.491 28.646 12.060 29.22 0.9 55 64 (1) (1) (1) (1) (2) (2) (2) (3) (4) m³/h kW kW m³/h kPa kW m³/h kPa dB(A) dB(A) 210 1.16 0.981 26.40 4.9 45 54 520 2. 5 Unit in standard configuration/execution.33 1.4 1.16 0.2 6.80 0.50 5.3 37 46 500 2.491 30.2 2.291 46./19°C w.8 45 54 1180 6.584 34.7 3.345 10.059 32.17 0.8 47 56 1010 5.85 2.491 7.2 4.9 8.775 16.6 39 48 360 2.15 3.400 17.258 9.200 4.520 8.398 17.5 47 56 660 3.173 3.15 0.52 0.95 0.140 36.24 0.3 50 59 1140 6.927 22.9 7.811 19.1 48 57 1310 7.3 47 56 980 5.74 0.b.6 2.00 0.18 0.585 36.40 2.699 15.300 9. TEchNIcAL dATA ShEET a-LIFE2 / DLIO-DFIO ELECTRICAL DATA Power supply Max absorbd power 2 PIPES SYSTEM CONFIGURATION MAX SPEED Air flow Total capacity in cooling mode Sensible capacity in cooling mode Max water flow Mad pressure drop Total capacity in heating mode Water flow in heating Pressure drop in heating Noise Pressure Noise Power MED SPEED Air flow Total capacity in cooling mode Sensible capacity in cooling mode Max water flow Mad pressure drop Total capacity in heating mode Water flow in heating Pressure drop in heating Noise Pressure Noise Power MIN SPEED Air flow Total capacity in cooling mode Sensible capacity in cooling mode Max water flow Mad pressure drop Total capacity in heating mode Water flow in heating Pressure drop in heating Noise Pressure Noise Power SIZE AND WEIGHT A B H Operating weight 0102 0202 0302 0402 0502 0602 0702 0802 0902 1002 V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 W 55 55 85 85 75 75 145 145 175 175 (1) (1) (1) (1) (2) (2) (2) (3) (4) m³/h kW kW m³/h kPa kW m³/h kPa dB(A) dB(A) 300 1.0 2.a-LIFE2 6.70 4.3 7. 10 A_LIFE2_0102_1004_201306_EN .31 0. without optional accessories.38 0.) from the ground 4 Sound power on the basis of measurements made in compliance with Eurovent 8/2.401 20.1 36 45 380 2.06 3.82 0.86 0.0 2.85 2.59 0.99 0.90 0.9 41 50 920 5.931 25.529 7..50 3.14 0.6 50 59 890 5.59 0.0 3.138 32.757 17.2 6.50 1.2 44 53 910 5.758 14.16 0.875 18.5 51 60 (1) (1) (1) (1) (2) (2) (2) (3) (4) m³/h kW kW m³/h kPa kW m³/h kPa dB(A) dB(A) 180 1.16 1.489 6.22 0.85 2.887 24.49 0.288 40.62 0.94 0.7 37 46 500 2.74 1.0 1.2 39 48 670 3.344 12.1 1.779 16.40 0.654 10.0 4.66 1.07 0.5 3.61 0.43 0.08 2.930 24.8 3.42 0.77 0.07 1.1 4.257 6.71 3.75 0..650 10.49 1.40 3.300 8.8 10.29 0.775 15.0 44 53 790 4.0 42 51 590 3.31 1.5 7.172 4.12 0.50 3.200 5.398 20.99 0. Hot water (in/out) 50/* °C (with identical flow note1) 3 Sound pressure in semianechoic room at 1 (m.9 45 54 780 4.b. 59 0.775 15.38 0. Hot water (in/out) 50/* °C (with identical flow note1) 3 Sound pressure in semianechoic room at 1 (m.39 0.981 26.1 1.b.5 47 56 660 3.00 1.22 0.1 45 54 (5) (5) (5) (5) mm mm mm kg 450 215 450 11 450 215 450 12 650 215 450 14 650 215 450 15 850 215 450 20 850 215 450 21 1050 215 450 23 1050 215 450 25 1250 215 450 27 1250 215 450 29 Notes: 1 Room temperature 27°C d.6 50 59 890 5.9 7.398 20.2 6.5 6.300 9.) from the ground 4 Sound power on the basis of measurements made in compliance with Eurovent 8/2.75 0.775 16.927 22.31 0.491 30.08 2.5 51 60 (1) (1) (1) (1) (2) (2) (2) (3) (4) m³/h kW kW m³/h kPa kW m³/h kPa dB(A) dB(A) 180 1.99 0.2 37 46 550 3.059 32.50 3.9 45 54 520 2.0 44 53 790 4.529 7.9 42 51 560 3.355 14.875 18.585 36.07 0.520 8.489 26.40 2.489 6.258 9.40 3.92 0.344 12.923 22.1 4.650 10.0 4.90 0.6 5.3 47 56 980 5.931 25.258 7.1 36 45 380 2.42 0. 5 Unit in standard configuration/execution.a-LIFE2 6.887 24.7 31 40 290 1.2 44 53 910 5.59 0. TEchNIcAL dATA ShEET a-LIFE2 / DLIV-DFIV ELECTRICAL DATA Power supply Max absorbd power 2 PIPES SYSTEM CONFIGURATION MAX SPEED Air flow Total capacity in cooling mode Sensible capacity in cooling mode Max water flow Mad pressure drop Total capacity in heating mode Water flow in heating Pressure drop in heating Noise Pressure Noise Power MED SPEED Air flow Total capacity in cooling mode Sensible capacity in cooling mode Max water flow Mad pressure drop Total capacity in heating mode Water flow in heating Pressure drop in heating Noise Pressure Noise Power MIN SPEED Air flow Total capacity in cooling mode Sensible capacity in cooling mode Max water flow Mad pressure drop Total capacity in heating mode Water flow in heating Pressure drop in heating Noise Pressure Noise Power SIZE AND WEIGHT A B H Operating weight 0102 0202 0302 0402 0502 0602 0702 0802 0902 1002 V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 W 55 55 85 85 75 75 145 145 175 175 (1) (1) (1) (1) (2) (2) (2) (3) (4) m³/h kW kW m³/h kPa kW m³/h kPa dB(A) dB(A) 300 1.814 17.32 0.49 1.779 16.491 7.300 8.257 7.95 0.74 0.3 41 50 760 4.50 5.86 0.80 2.16 0.8 6.06 0.b.06 3./19°C w.22 0.0 1.41 4.2 6.0 42 51 590 3.4 5.8 47 56 1010 5.9 8.16 0.43 0.2 39 48 670 3.31 1.29 0.15 0.22 0.15 0.89 1.71 3.0 3..0 3.5 8. Chilled water (in/out) 7/12°C 2 Room temperature 20°C d.74 1.52 0.62 5.85 2.5 28 37 270 1.3 50 59 1140 6.24 0.15 4.17 0.584 34.2 2.758 14.140 36.18 0.16 0.6 2.654 10.00 0.291 46. 11 A_LIFE2_0102_1004_201306_EN .4 6.401 20.4 1.5 7.0 2.7 2.8 3.06 3.61 0.18 0.82 0.07 1.0 2.400 17.75 2.3 37 46 500 2.7 37 46 500 2.060 29.80 0.5 3.757 17.77 0.2 4.930 24.646 12.40 4.78 0.15 3.491 28..50 1.17 0.62 0.775 18.44 0.1 48 57 1310 7.85 2.09 0.138 32.699 15.398 17.7 3.356 16.95 0.257 6.40 0.2 37 46 350 2.654 12.878 20.200 5.2 6.81 1.49 0.200 4.3 7.40 0.8 10.871 21.94 0.82 0.701 13.1 39 48 640 4.0 5.b.811 19.08 0.99 0.9 45 54 780 4.519 7.487 24.70 4.13 0.345 10.66 1. without optional accessories.172 4.6 39 48 360 2.173 3.16 1.530 8.14 0.979 23.84 0.3 39 48 410 2.7 45 54 815 4.02 2.14 0.09 1.8 45 54 1180 6.50 3.33 1.12 0.59 0.288 40.00 0.) from fan front and 1 (m.9 55 64 (1) (1) (1) (1) (2) (2) (2) (3) (4) m³/h kW kW m³/h kPa kW m³/h kPa dB(A) dB(A) 210 1.9 41 50 920 5.85 2. 814 17.529 7.22 0.4 6.17 0.31 1.85 2.8 6.06 3.345 10.5 7.49 0.0 42 51 590 3.00 0.0 2.50 1.90 0.0 3.14 0.40 4.59 0.29 0.519 7.530 8.b.77 0.200 4.62 0.42 0.140 36.85 2.356 16.4 5.775 18.09 1.355 14.50 3.50 3.94 0.654 10.258 9.3 47 56 980 5.6 50 59 890 5.059 32.06 0.81 1.401 20.650 10.1 39 48 640 4.2 6.1 48 57 1310 7.49 1.66 1.400 17.92 0.398 20.40 2.16 0.82 0.9 42 51 560 3.491 7.3 7.74 1.200 5.2 37 46 550 3.) from fan front and 1 (m.86 0. without optional accessories.3 50 59 1140 6.02 2.75 2.7 45 54 815 4.9 8.654 12. 5 Unit in standard configuration/execution.1 4.491 30.584 34.44 0.811 19.646 12.9 45 54 780 4.78 0.61 0.38 0.701 13. Hot water (in/out) 50/* °C (with identical flow note1) 3 Sound pressure in semianechoic room at 1 (m.7 2.2 39 48 670 3.00 1.5 6.89 1.257 6.0 1.060 29.71 3..172 4.3 41 50 760 4.9 45 54 520 2.74 0.300 9.06 3.757 17.491 28.3 39 48 410 2.9 7.5 3.32 0.15 0.930 24.22 0.41 4.08 2.3 37 46 500 2.16 0.923 22.95 0.0 5.99 0.85 2.07 1.13 0.398 17.40 3.6 39 48 360 2.12 0.40 0.59 0.84 0.17 0.16 0.2 6.43 0.5 51 60 (1) (1) (1) (1) (2) (2) (2) (3) (4) m³/h kW kW m³/h kPa kW m³/h kPa dB(A) dB(A) 180 1.489 26.291 46.80 0.775 15.2 4.699 15.a-LIFE2 6.487 24.15 0.15 3.8 45 54 1180 6.300 8.18 0.173 3. Chilled water (in/out) 7/12°C 2 Room temperature 20°C d.138 32.18 0.8 47 56 1010 5.7 31 40 290 1. 12 A_LIFE2_0102_1004_201306_EN .08 0.b.b.7 37 46 500 2.33 1..875 18.585 36.) from the ground 4 Sound power on the basis of measurements made in compliance with Eurovent 8/2.1 45 54 (5) (5) (5) (5) mm mm mm kg 922 233 499 16 922 233 499 17 1112 233 499 20 1112 233 499 21 1302 233 499 27 1302 233 499 28 1492 233 499 32 1492 233 499 33 1682 233 499 37 1682 233 499 38 Notes: 1 Room temperature 27°C d.878 20.8 10.62 5.39 0.24 0.6 2.2 44 53 910 5.931 25.775 16.2 6.4 1.95 0.520 8.5 28 37 270 1.50 5.16 1.2 37 46 350 2.887 24.52 0.0 2.31 0.344 12.59 0.75 0.489 6.9 41 50 920 5.09 0.07 0.0 44 53 790 4.9 55 64 (1) (1) (1) (1) (2) (2) (2) (3) (4) m³/h kW kW m³/h kPa kW m³/h kPa dB(A) dB(A) 210 1.14 0.00 0.15 4.0 3.5 8.8 3.288 40.40 0.22 0.979 23.5 47 56 660 3.758 14.2 2.779 16.6 5./19°C w.99 0.927 22.70 4.1 36 45 380 2.981 26. TEchNIcAL dATA ShEET a-LIFE2 / DLMV-DFMV / DLMO-DFMO ELECTRICAL DATA Power supply Max absorbd power 2 PIPES SYSTEM CONFIGURATION MAX SPEED Air flow Total capacity in cooling mode Sensible capacity in cooling mode Max water flow Mad pressure drop Total capacity in heating mode Water flow in heating Pressure drop in heating Noise Pressure Noise Power MED SPEED Air flow Total capacity in cooling mode Sensible capacity in cooling mode Max water flow Mad pressure drop Total capacity in heating mode Water flow in heating Pressure drop in heating Noise Pressure Noise Power MIN SPEED Air flow Total capacity in cooling mode Sensible capacity in cooling mode Max water flow Mad pressure drop Total capacity in heating mode Water flow in heating Pressure drop in heating Noise Pressure Noise Power SIZE AND WEIGHT A B H Operating weight 0102 0202 0302 0402 0502 0602 0702 0802 0902 1002 V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 W 55 55 85 85 75 75 145 145 175 175 (1) (1) (1) (1) (2) (2) (2) (3) (4) m³/h kW kW m³/h kPa kW m³/h kPa dB(A) dB(A) 300 1.1 1.80 2.871 21.7 3.257 7.0 4.258 7.82 0. 348 33.) from fan front and 1 (m.585 36.232 17.50 5.811 19.109 6.08 2.0 0.a-LIFE2 6. 13 A_LIFE2_0102_1004_201306_EN .83 0.0 2.95 0.2 39 48 360 2.31 0.70 4.81 1.99 0.5 3.85 2.16 1.4 0.31 0.40 4.775 16.257 7.165 9.99 0.200 5.8 2.59 0.491 28.67 0.2 50 59 1140 6.2 4.356 16.28 0.0 3.110 6.6 47 56 660 3.9 28 37 270 1.146 10.22 0.71 0.423 45.9 31 40 290 1.b.87 0.8 37 46 550 3./19°C w.887 24.77 0.88 0.16 0.3 39 48 670 3.2 3.203 13.32 0.401 20. without optional accessories.18 0.50 3.7 1.2 4.0 2.334 29.33 1.2 1.398 20.85 2.41 4.4 3.40 2.334 29.3 41 50 920 5.49 0.166 9.699 15.2 44 53 790 4.238 18.95 0.2 2.0 1.289 26.1 55 64 (1) (1) (1) (1) (2) (2) (2) (3) (4) m³/h kW kW m³/h kPa kW m³/h kPa dB(A) dB(A) 210 1.301 24.31 1.1 37 46 500 2.90 0.5 51 60 (1) (1) (1) (1) (2) (2) (2) (3) (4) m³/h kW kW m³/h kPa kW m³/h kPa dB(A) dB(A) 180 1.488 62.554 79.78 0. Chilled water (in/out) 7/12°C 2 Room temperature 20°C d.31 0.6 48 57 1310 7.00 1.3 47 56 1010 5.06 3.654 12.5 47 56 980 5.9 5.50 3.22 0.9 4.97 0.75 2.293 27.9 45 54 (5) (5) (5) (5) mm mm mm kg 545 215 450 12 545 215 450 12 745 215 450 14 745 215 450 15 945 215 450 21 945 215 450 22 1145 215 450 24 1145 215 450 25 1345 215 450 28 1345 215 450 29 Notes: 1 Room temperature 27°C d.646 12.15 4.172 4.44 0.291 46.757 17.00 0.07 1.66 1.b.82 0.981 26.43 0.5 5. 5 Unit in standard configuration/execution.59 0.81 0.65 0.89 0.491 30.258 9.0 37 46 500 2.) from the ground 4 Sound power on the basis of measurements made in compliance with Eurovent 8/2.85 2.300 9.382 37.81 0.399 42.2 39 48 410 2.b.930 24.375 36.3 4.76 0.74 1.7 45 54 520 2.085 3.0 2.68 0.18 0.59 0.6 50 59 890 5.5 1.8 3.00 0.344 12.43 0.454 54.0 45 54 815 4.400 43.3 42 51 560 3.80 2.6 3.50 1.775 18.30 0.22 0.24 0.45 0.06 3.7 1.2 36 45 380 2.6 1.36 0.15 3.491 7. hot water (in/out) 70/60°C 3 Sound pressure in semianechoic room at 1 (m.24 0.0 1.55 0.203 13.073 2.4 3.39 0..61 0.1 2.14 0.220 15.97 0.0 41 50 760 4.1 37 46 350 2.51 0.5 39 48 640 4.1 45 54 1180 6.62 5.5 4.75 0.931 25.40 3.4 45 54 780 4.3 42 51 590 3.16 0.56 0.147 7. TEchNIcAL dATA ShEET a-LIFE2 / DLIO-DFIO ELECTRICAL DATA Power supply Max absorbd power 4 PIPES SYSTEM CONFIGURATION MAX SPEED Air flow Total capacity in cooling mode Sensible capacity in cooling mode Max water flow Mad pressure drop Total capacity in heating mode Water flow in heating Pressure drop in heating Noise Pressure Noise Power MED SPEED Air flow Total capacity in cooling mode Sensible capacity in cooling mode Max water flow Mad pressure drop Total capacity in heating mode Water flow in heating Pressure drop in heating Noise Pressure Noise Power MIN SPEED Air flow Total capacity in cooling mode Sensible capacity in cooling mode Max water flow Mad pressure drop Total capacity in heating mode Water flow in heating Pressure drop in heating Noise Pressure Noise Power SIZE AND WEIGHT A B H Operating weight 0104 0204 0304 0404 0504 0604 0704 0804 0904 1004 V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 W 55 55 85 85 75 75 145 145 175 175 (1) (1) (1) (1) (2) (2) (2) (3) (4) m³/h kW kW m³/h kPa kW m³/h kPa dB(A) d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chNIcAL dATA ShEET D/.21 0$. (/(&75.)(').=($1':(.a-LIFE2 6. . . . . . . . . PñK N: N: PñK N3D N: PñK N3D G%$. G%$.                                                                                                     . . . . . . . . . PñK N: N: PñK N3D N: PñK N3D G%$. G%$.                                                                                                     . . . . . . . . . PñK N: N: PñK N3D N: PñK N3D G%$. G%$.                                                                                                     . . . . PP PP PP NJ                                         1RWHV 5RRPWHPSHUDWXUHƒ&GEƒ&ZE&KLOOHGZDWHULQRXW. ƒ& 5RRPWHPSHUDWXUHƒ&GEKRWZDWHULQRXW. ƒ& 6RXQGSUHVVXUHLQVHPLDQHFKRLFURRPDWP. IURPIDQIURQWDQGP. IURPWKHJURXQG 6RXQGSRZHURQWKHEDVLVRIPHDVXUHPHQWVPDGHLQFRPSOLDQFHZLWK(XURYHQW 8QLWLQVWDQGDUGFRQILJXUDWLRQH[HFXWLRQZLWKRXWRSWLRQDODFFHVVRULHV 14 A_LIFE2_0102_1004_201306_EN . 16 1.0 2.52 0.57 0.34 0.49 1.30 0.16 0.b. without optional accessories.41 4.b.0 0.8 2.22 0.9 45 54 (5) (5) (5) (5) mm mm mm kg 922 233 499 17 922 233 499 18 1112 233 499 21 1112 233 499 22 1302 233 499 29 1302 233 499 30 1492 233 499 33 1492 233 499 35 1682 233 499 38 1682 233 499 40 Notes: 1 Room temperature 27°C d.699 15.31 0. 5 Unit in standard configuration/execution.0 1.242 18.0 45 54 815 4.2 39 48 360 2.0 2.9 5.0 37 46 500 2.40 3.2 2.200 5.4 0.0 3.147 7.4 3.6 50 59 890 5.14 0.375 36.97 0.5 3.9 4.75 0.5 5.62 5.554 79.520 8.2 4.33 1.059 32.24 0.81 0.90 0.654 12.401 20.66 1.4 45 54 780 4.76 0.43 0.293 27.5 47 56 980 5.2 44 53 790 4.18 0.301 24.7 1.77 0.757 17.8 3.50 1.203 13.1 37 46 350 2.08 2.382 37.3 41 50 920 5.3 39 48 670 3.68 0.398 20. Hot water (in/out) 70/60 °C.59 0.2 44 53 910 5.97 0.530 8./19°C w.2 4.95 0.39 0. 15 A_LIFE2_0102_1004_201306_EN .2 3.59 0.8 37 46 550 3.07 1.74 1.5 4.339 35.0 2.140 36.488 62.811 19.585 36.203 13.344 12.32 0.109 6.871 21.) from the ground 4 Sound power on the basis of measurements made in compliance with Eurovent 8/2.70 4.5 39 48 640 4.00 0.348 33.334 29.400 43.36 0.50 3.7 1.38 0.06 3.6 48 57 1310 7.356 16.399 42.2 50 59 1140 6.06 3..88 0.4 3.6 3.220 15.31 1.00 1.110 6.65 0.2 36 45 380 2.2 1.3 4.00 0.1 2.981 26.25 0.1 45 54 1180 6. Supplementary coil 1-row 3 Sound pressure in semianechoic room at 1 (m.99 0.67 0.172 4.165 9.55 0.85 2.61 0.85 2.232 17.83 0.a-LIFE2 6.6 47 56 660 3.454 54.491 7.45 0.49 0.238 18.44 0.9 28 37 270 1.146 10.0 1.931 25.40 2.491 30.257 7.334 29.51 0..289 26.1 37 46 500 2.50 5.85 2.0 41 50 760 4.085 3. Chilled water (in/out) 7/12°C 2 Room temperature 20°C d.16 0.5 51 60 (1) (1) (1) (1) (2) (2) (2) (3) (4) m³/h kW kW m³/h kPa kW m³/h kPa dB(A) dB(A) 180 1.291 46.300 9.166 9.18 0.95 0.22 0.7 45 54 520 2.31 0.) from fan front and 1 (m.775 18.78 0.24 0.3 42 51 560 3.3 47 56 1010 5.491 28.775 16.75 2.71 0.87 0.127 8. TEchNIcAL dATA ShEET a-LIFE2 / DLMV-DFMV / DLMO-DFMO ELECTRICAL DATA Power supply Max absorbd power 4 PIPES SYSTEM CONFIGURATION MAX SPEED Air flow Total capacity in cooling mode Sensible capacity in cooling mode Max water flow Mad pressure drop Total capacity in heating mode Water flow in heating Pressure drop in heating Noise Pressure Noise Power MED SPEED Air flow Total capacity in cooling mode Sensible capacity in cooling mode Max water flow Mad pressure drop Total capacity in heating mode Water flow in heating Pressure drop in heating Noise Pressure Noise Power MIN SPEED Air flow Total capacity in cooling mode Sensible capacity in cooling mode Max water flow Mad pressure drop Total capacity in heating mode Water flow in heating Pressure drop in heating Noise Pressure Noise Power SIZE AND WEIGHT A B H Operating weight 0104 0204 0304 0404 0504 0604 0704 0804 0904 1004 V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 W 55 55 85 85 75 75 145 145 175 175 (1) (1) (1) (1) (2) (2) (2) (3) (4) m³/h kW kW m³/h kPa kW m³/h kPa dB(A) dB(A) 300 1.6 1.89 0.2 39 48 410 2.1 55 64 (1) (1) (1) (1) (2) (2) (2) (3) (4) m³/h kW kW m³/h kPa kW m³/h kPa dB(A) dB(A) 210 1.59 0.258 9.423 45.646 12.930 24.40 4.8 6.81 0.99 0.15 4.b.3 42 51 590 3.50 3.5 1.28 0.22 0.82 0.9 31 40 290 1.80 2.71 3.887 24.56 0.43 0.073 2.15 3.31 0.81 1.02 2. Static useful head [Pa] The graphs on the following pages show the useful head or working pressures in relation to the air flow and the fan speed. FAN PERFoRMANcES a-LiFE2 is designed to assure high pressure also with pressure drops due to complex ducts. a-LIFE2 0102-0104 100 Prevalenza utile [Pa] .Air Flow [m3/h] a-LIFE2 0202-0204 Prevalenza utile [Pa] . They come with six different fan speeds.Static useful head [Pa] 100 90 80 70 Velocità cablate in fabbrica Factory Wired speed 60 L1 50 L2 Velocità massima Maximum speed 40 L5 30 L3 L2 L3 Velocità media Medium Speed L4 20 L5 Velocità minima Minimum Speed 10 L6 0 0 50 100 150 200 250 300 350 400 450 Portata aria [m3/h] . 90 80 70 Velocità cablate in fabbrica Factory Wired speed 60 L1 50 40 L2 Velocità massima Maximum speed 30 L3 Velocità media Medium Speed L5 20 L3 L2 L4 L5 Velocità minima Minimum Speed 10 L6 0 0 50 100 150 200 250 300 350 Portata aria [m3/h] .Air Flow [m3/h] 16 A_LIFE2_0102_1004_201306_EN .Static useful head [Pa] 100 90 80 70 Velocità cablate in fabbrica Factory Wired speed 60 L5 50 L3 L1 L2 40 L2 Velocità massima Maximum speed 30 L3 Velocità media Medium Speed L4 20 L5 Velocità minima Minimum Speed 10 L6 0 0 50 100 150 200 250 300 350 400 Portata aria [m3/h] .a-LIFE2 7.Air Flow [m3/h] a-LIFE2 0302-0304 Prevalenza utile [Pa] . NoTE: the graphs refer to the versions with 3-row coils. The other three fan speeds can be cabled on site. A particular care has been reserved to the configurations of the three fan speeds cabled by the manufacturer. Air Flow [m3/h] a-LIFE2 0502-0504 120 Prevalenza utile [Pa] .Static useful head [Pa] 110 100 90 80 70 Velocità cablate in fabbrica Factory Wired speed 60 L1 50 40 L2 Velocità massima Maximum speed 30 L3 Velocità media Medium Speed L5 20 L3 L2 L4 L5 Velocità minima Minimum Speed 10 0 L6 0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 Portata aria [m3/h] . FAN PERFoRMANcES a-LIFE2 0402-0404 Prevalenza utile [Pa] .a-LIFE2 7.Air Flow [m3/h] a-LIFE2 0602-0604 120 Prevalenza utile [Pa] .Static useful head [Pa] 100 90 80 70 Velocità cablate in fabbrica Factory Wired speed 60 L1 50 40 L5 L3 L2 Velocità massima Maximum speed L2 L3 Velocità media Medium Speed 30 L4 20 L5 Velocità minima Minimum Speed 10 L6 0 0 50 100 150 200 250 300 350 400 450 500 550 600 650 Portata aria [m3/h] .Static useful head [Pa] 110 100 90 80 70 Velocità cablate in fabbrica Factory Wired speed 60 L1 50 40 L2 Velocità massima Maximum speed 30 L3 Velocità media Medium Speed L5 L3 L2 L4 20 L5 Velocità minima Minimum Speed 10 0 L6 0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 Portata aria [m3/h] .Air Flow [m3/h] 17 A_LIFE2_0102_1004_201306_EN . Static useful head [Pa] 120 110 100 90 80 Velocità cablate in fabbrica Factory Wired speed 70 60 L1 50 L2 Velocità massima Maximum speed 40 L5 L3 L3 Velocità media Medium Speed L2 30 L4 20 L5 Velocità minima Minimum Speed 10 L6 0 0 100 200 300 400 500 600 700 800 900 1000 Portata aria [m3/h] .Static useful head [Pa] 120 110 100 90 80 Velocità cablate in fabbrica Factory Wired speed 70 60 L1 50 L2 Velocità massima Maximum speed 40 30 L5 L3 L3 Velocità media Medium Speed L2 L4 20 L5 Velocità minima Minimum Speed 10 L6 0 0 100 200 300 400 500 600 700 800 900 1000 1100 Portata aria [m3/h] .a-LIFE2 7. FAN PERFoRMANcES a-LIFE2 0702-0704 130 Prevalenza utile [Pa] .Air Flow [m3/h] 18 A_LIFE2_0102_1004_201306_EN .Air Flow [m3/h] a-LIFE2 0802-0804 130 Prevalenza utile [Pa] . Static useful head [Pa] 120 110 100 90 80 Velocità cablate in fabbrica Factory Wired speed 70 60 L1 50 L2 Velocità massima Maximum speed 40 L3 Velocità media Medium Speed 30 L4 20 L5 10 0 L3 L2 L5 Velocità minima Minimum Speed L6 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 Portata aria [m3/h] .Air Flow [m3/h] 19 A_LIFE2_0102_1004_201306_EN .Air Flow [m3/h] a-LIFE2 0102-0104 130 Prevalenza utile [Pa] . FAN PERFoRMANcES a-LIFE2 0902-0904 130 Prevalenza utile [Pa] .a-LIFE2 7.Static useful head [Pa] 120 110 100 90 80 Velocità cablate in fabbrica Factory Wired speed 70 60 L1 50 L2 Velocità massima Maximum speed 40 L5 30 L3 L3 Velocità media Medium Speed L2 L4 20 L5 Velocità minima Minimum Speed 10 L6 0 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 Portata aria [m3/h] . 10 Perdita di carico [kPa] .00 .10 Perdita di carico [kPa] .Pressure drop [kPa] a-LIFE2 0102÷0402 (2 pipes) 1.00 100 MAIN coIL hEATING Portata acqua [m3/h] .Pressure drop [kPa] MAIN coIL a-LIFE2 0102 a-LIFE2 0202 a-LIFE2 0302 a-LIFE2 0402 10 1 0.Water Flow [m3/h] a-LIFE2 0104-0204 a-LIFE2 0304-0404 10 1 0.10 Portata acqua [m3/h] . PRESSURE dRoP 100 cooLING a-LIFE2 0102÷0402 (2 pipes) Perdita di carico [kPa] .Water Flow [m3/h] 20 A_LIFE2_0102_1004_201306_EN 1.Pressure drop [kPa] a-LIFE2 0104÷0404 (4 pipes) 1.00 100 AddITIoNAL coIL hEATING Portata acqua [m3/h] .a-LIFE2 8.Water Flow [m3/h] a-LIFE2 0102-0302 a-LIFE2 0202 a-LIFE2 0402 10 1 0. Pressure drop [kPa] a-LIFE2 0502÷1002 (2 pipes) 1.Water Flow [m3/h] a-LIFE2 0504-0604 a-LIFE2 0704-0804 a-LIFE2 0904-1004 10 1 0.Water Flow [m3/h] 21 A_LIFE2_0102_1004_201306_EN 1.a-LIFE2 8.Pressure drop [kPa] MAIN coIL a-LIFE2 0502-0602-0702 10 a-LIFE2 0802-0902-1002 1 0.15 Perdita di carico [kPa] .15 Perdita di carico [kPa] .Pressure drop [kPa] a-LIFE2 0504÷1004 (4 pipes) 1.Water Flow [m3/h] a-LIFE2 0502-0602-0702 10 a-LIFE2 0802-0902-1002 1 0. PRESSURE dRoP 100 cooLING a-LIFE2 0502÷1002 (2 pipes) Perdita di carico [kPa] .00 .10 Portata acqua [m3/h] .50 100 MAIN coIL hEATING Portata acqua [m3/h] .50 100 AddITIoNAL coIL hEATING Portata acqua [m3/h] . Correction factor 1.6 1.0 0.9 0.5 1.4 1.9 0.7 0.2 Perdite di carico Pressure drop 1.2 1.Correction factor GLYcoL WATER AT 35% 1.9 0.2 Perdite di carico Pressure drop 1.Correction factor 1.a-LIFE2 9.1 Resa Capacity 1.6 0.6 6 7 8 9 10 11 12 13 14 15 16 17 °C Fattore di correzione .5 Perdite di carico Pressure drop Resa Capacity Portata Water flow 6 7 8 9 10 11 12 13 14 15 22 16 17 18 °C A_LIFE2_0102_1004_201306_EN .3 1.0 Portata Water flow 0.8 6 7 8 9 10 11 12 13 14 15 16 17 °C GLYcoL WATER AT 20% Fattore di correzione .1 1.7 0.8 0.1 Resa Capacity Portata Water flow 1.0 0.8 0. coRREcTIoN FAcToRS IN cooLING oPERATIoN WITh GLYcoL WATER GLYcoL WATER AT 10% Fattore di correzione . 3 Resa Capacity 1.8 30 40 50 60 70 80 23 90 °C A_LIFE2_0102_1004_201306_EN .0 0. coRREcTIoN FAcToRS IN hEATING oPERATIoN WITh GLYcoL WATER GLYcoL WATER AT 10% Fattore di correzione .4 Perdite di carico Pressure drop 1.Correction factor 1 1.1 1.6 0.Correction factor 1.2 Portata Water flow 1.a-LIFE2 10.4 Perdite di carico Pressure drop 1.0 0.3 Resa Capacity 1.8 30 40 50 60 70 80 90 °C GLYcoL WATER AT 35% Fattore di correzione .6 0.2 Portata Water flow 1.3 Resa Capacity 1.8 30 40 50 60 70 80 90 °C GLYcoL WATER AT 20% Fattore di correzione .4 1 Perdite di carico Pressure drop 1.Correction factor 1.0 0.1 1.2 Portata Water flow 1.1 1.6 0. 5 35.5 47.2 21.1 44.8 43.7 8 khz 4.3 4 khz 17.0 32.9 38.0 2 khz 25.0 39.6 36.6 36.3 8 khz 16.9 8 khz 10. SoUNd PoWER LEVEL a-LIFE2 Model 0102-0104 0202-0204 0302-0304 0402-0404 0502-0504 0602-0604 0702-0704 0802-0804 0902-0904 1002-1004 sound power level max.0 41.2 a-LIFE2 0802-0804 Minimum speed dB(A) Medium speed Maximum speed 125 hz 39.3 35.0 43.5 8 khz 14.2 44.6 33.8 31.5 45.7 39.2 44.8 30.7 29.6 21.5 46.5 37.6 25.1 24.7 50.4 a-LIFE2 0202-0204 Minimum speed dB(A) Medium speed Maximum speed 125 hz 37.2 4 khz 28.8 2 khz 33. speed (2) dB(A) 48 54 51 56 54 59 56 59 57 64 sound power level med.5 1 khz 35.8 250 hz 40.5 39.5 42.1 12.9 40.4 27.0 49.0 500 hz 43.4 38.4 4 khz 24.6 28.2 43.8 39.0 28.0 500 hz 46.8 18.5 38.8 13.3 27.4 250 hz 44.1 2 khz 37.5 42.3 36.6 8 khz 11.2 30.9 250 hz 40.3 500 hz 39.3 250 hz 37.8 48.9 39.6 500 hz 39.7 38.3 1 khz 29.6 1 khz 20.2 38.4 250 hz 47.9 44.7 a-LIFE2 0702-0704 Minimum speed dB(A) Medium speed Maximum speed 125 hz 42.1 2 khz 33.7 4 khz 24.4 29.6 250 hz 39.3 33.9 28.8 8 khz 15.6 1 khz 30.8 1 khz 30.8 33.9 41.9 41.0 4 khz 22.6 42.4 37.2 1 khz 35.0 21.4 23.3 4 khz 20.0 35.5 42.8 29.5 32.6 8 khz 15.2 29.0 500 hz 36.0 28.3 20.2 47.9 36.2 24.3 37.2 40.5 a-LIFE2 1002-1004 Minimum speed dB(A) Medium speed Maximum speed 125 hz 34.1 500 hz 37.3 43.3 44.3 31.7 2 khz 26.9 42.3 22.0 41.2 44.6 250 hz 29.5 45.1 24.4 a-LIFE2 0402-0404 Minimum speed dB(A) Medium speed Maximum speed 125 hz 36.2 4 khz 25.8 50.6 250 hz 38.3 43.2 250 hz 35.0 31.0 32.4 8 khz 13.4 4 khz 19.0 a-LIFE2 0602-0604 Minimum speed dB(A) Medium speed Maximum speed 125 hz 38.9 45.5 45.2 45.3 35. speed (3) dB(A) 40 48 46 51 48 54 53 56 54 60 sound power level min.2 500 hz 39.1 29.7 34.3 40.2 500 hz 28.1 35.6 43. SoUNd PRESSURE LEVEL a-LIFE2 Model 0102-0104 0202-0204 0302-0304 0402-0404 0502-0504 0602-0604 0702-0704 0802-0804 0902-0904 1002-1004 sound pressure level at the minimum air flow dB(A) 28 37 36 37 37 39 47 44 41 45 sound pressure level at the average air flow dB(A) 31 39 37 42 39 45 44 47 45 51 sound pressure level at the maximum air flow dB(A) 39 45 42 47 45 50 41 50 48 55 sound pressure levels in semi-anechoic chamber 1 (m) from fan at front and 1 (m) above the floor a-LIFE2 0102-0104 Minimum speed dB(A) Medium speed Maximum speed 125 hz 29.0 46.9 2 khz 27.1 a-LIFE2 0502-0504 Minimum speed dB(A) Medium speed Maximum speed 125 hz 36.9 35.4 500 hz 37.3 24.1 29.2 12.5 39.5 250 hz 40.1 43.3 1 khz 37.5 8 khz 17.5 48.6 2 khz 14.6 43.7 39.3 2 khz 23.5 39.9 42.7 1.2 2 khz 25.1 a-LIFE2 0302-0304 Minimum speed dB(A) Medium speed Maximum speed 125 hz 38.7 22.9 500 hz 37.a-LIFE2 11.4 10.1 1 khz 28.7 44.0 39.0 4 khz 18.7 4 khz 10.5 18.5 37.7 41.3 40.8 41.8 49.9 37.3 38.3 29.5 12.3 37.3 1 khz 40.2 40.3 41. speed (5) dB(A) 37 46 45 46 46 48 50 53 50 54 sound power on the basis of measurements made in compliance with Eurovent 8/2 24 A_LIFE2_0102_1004_201306_EN .6 32.8 34.1 33.1 2 khz 34.3 14.3 24.8 38.9 35.9 31.5 39.2 21.6 45.2 a-LIFE2 0902-0904 Minimum speed dB(A) Medium speed Maximum speed 125 hz 34.1 8 khz 15.1 43.6 38.9 20.6 1 khz 30.3 30.0 37.7 38. Earth Com Comune ventilatore . MV GNYE 230V~50/60Hz IG 25 Interruttore di protezione (a cura del cliente) .Thermomagnetic switch (by the customer) A_LIFE2_0102_1004_201306_EN C .Phase (230V~line) N Neutro .Med. FANcoIL coNTRoLS on board controls PS The Ps control is used to regulate the airflow (3 speeds).White BN Marrone . Function selector Cooling heating off Fan selector Maximum fan speed Medium fan speed Minimum fan speed Electrical connections J2 2-PIPES UNIT: Always carry out this connection when there is just one valve.Max.Water 10 9 8 7 YV2 BN BU YV1 BN 6 5 4 3 2 L N PE BU 1 BU Com RD Max WH Med BN Min AUTR 2 1 BT2 7 L L 3 4 5 6 L GNYE Giallo/Verde-Yellow/Green WH Bianco . speed (High) MV Motore ventilatore – Fan motor C Condensatore – Capacitor AUTR Autotrasformatore – Autotransformer BT2 Sonda acqua – Water sensor ACCESSORI – ACCESSORIES YV1 Valvola batteria principale – Main coil valve YV2 Valvola batteria aggiuntiva – Secondary coil valve 1 2 L L Valvola Valve L 8 BU 7 BN N N J2 IG L 7 L 3 4 5 6 UNITÀ 2-TUBI: Eseguire questo collegamento sempre in caso di una sola valvola.Blue L Fase (linea 230V~) .a-LIFE2 13. Acqua .Brown RD Rosso – Red BU Blu . speed (Low) Med Velocità Media .Neutral PE Terra .Common of the fan Min Velocità Minima . speed (Medium) Max Velocità Massima . select the summer/winter mode of operation and switch the fan-coil on/off and hot start function by minimun thermostat kit.Min. White BN Marrone . to select the summer/winter mode of operation and to switch the fan-coil on/off. FANcoIL coNTRoLS on board controls MT The MT control is used to regulate the air (3 speeds).Water BT1 BT2 7 L GNYE Giallo/Verde-Yellow/Green WH Bianco .Blue L Fase (linea 230V~) .Common of the fan Min Velocità Minima .Neutral PE Terra . speed (Low) Med Velocità Media . the temperature through electronic thermostat.Brown RD Rosso – Red BU Blu .Earth Com Comune ventilatore . speed (High) MV Motore ventilatore – Fan motor C Condensatore – Capacitor AUTR Autotrasformatore – Autotransformer BT1 Sonda aria – Air sensor BT2 Sonda acqua – Water sensor ACCESSORI – ACCESSORIES YV1 Valvola batteria principale – Main coil valve YV2 Valvola batteria aggiuntiva – Secondary coil valve L L BN Aria .Air Valvola Valve L 7 BU L 8 N N J1 10 9 8 2 1 7 YV2 BN BU YV1 BN 6 5 4 3 2 L N PE BU 1 BU RD Com Max WH Med BN Min AUTR 7 IG L 4 5 6 L 3 MV GNYE 230V~50/60Hz IG 26 Interruttore di protezione (a cura del cliente) .Min. Temperature selector Adjust the temperature as required by turning the temperature selector from +14°C to 30°C.Thermomagnetic switch (by the customer) A_LIFE2_0102_1004_201306_EN C .a-LIFE2 13. Led description Blue Led: indicates fan-coil thermostat call Function selector Cooling heating off Fan selector Maximum fan speed Medium fan speed Minimum fan speed Electrical connections J2 UNITA’ 2-TUBI: Eseguire questo collegamento sempre in caso di una sola valvola. 4 5 6 L 1 2 3 J2 Acqua .Phase (230V~line) N Neutro .Max.Med. speed (Medium) Max Velocità Massima . 2-PIPES UNIT: Always carry out this connection when there is just one valve. Phase (230V~line) N Neutro .Common of the fan Min Velocità Minima .Neutral PE Terra . Maximum fan speed Medium fan speed Minimum fan speed Automatic fan speed Led Blue LED: heating / Cooling plus regulator call Blue LED blinking: hot start / Too Cool function active Blue LED: operation in Cooling mode Blue LED: operation in heating mode Blue LED: automatic cooling / heating mode selection Electrical connections Kit GATEWAY GATEWAY TTL J5 BUS BTICINO 1 2 3 4 13 12 SA1 J1 Aria . speed (Medium) Max Velocità Massima . speed (Low) Med Velocità Media . Function button La scelta del modo di funzionamento è possibile tramite il pulsante Mode led Cooling heating off Automatic setting Speed button select the fan speed pushing the button.Red BU Blu .Brown RD Rosso .Blue BK Nero . The repeated pressure of fan button determines speed required.Earth Com Comune ventilatore .Multifunctional contact (by the customer) 27 A_LIFE2_0102_1004_201306_EN C . to select the summer/winter/auto mode of operation and to switch the fan-coil on/off.Thermomagnetic switch (by the customer) SA1 Contatto multifunzionale (a cura del cliente) .Black L Fase (linea 230V~) .Air J2 Acqua .Min.Water L L L L L BUS-ADAPTER L N Kit BUS-ADAPTER AT TTL 10 9 TTL 8 J5 L 7 1 BT2 BU YV2 BN BU YV1 BN 6 5 230V~ 4 3 IG BUS 2 BT1 5 6 7 2 L N PE 1 BU RD Com Max WH Med BN Min AUTR AT TTL N GNYE Giallo/Verde-Yellow/Green WH Bianco . FANcoIL coNTRoLS on board controls AT The AT control is used to regulate the air (3 speeds + auto). speed (High) MV Motore ventilatore – Fan motor C Condensatore – Capacitor AUTR Autotrasformatore – Autotransformer BT1 Sonda aria – Air sensor BT2 Sonda acqua – Water sensor ACCESSORI – ACCESSORIES YV1 Valvola batteria principale – Main coil valve Valvola batteria aggiuntiva – Secondary coil valve YV2 MV GNYE 230V~50/60Hz IG Interruttore di protezione (a cura del cliente) .White BN Marrone .Max.Med. Temperature selector Adjust the temperature as required by turning the temperature selector from +14°C to 30°C.a-LIFE2 13. the temperature through electronic thermostat. Phase (230V~line) N Neutro .Max.White BN Marrone .Common of the fan Min Velocità Minima .a-LIFE2 13. Function selector Cooling heating off Fan selector Maximum fan speed Medium fan speed Minimum fan speed Electrical connections J2 2-PIPES UNIT: Always carry out this connection when there is just one valve 9 8 Acqua . speed (Medium) Max Velocità Massima . MV C GNYE 230V~50/60Hz IG 28 Interruttore di protezione (a cura del cliente) - Thermomagnetic switch (by the customer) A_LIFE2_0102_1004_201306_EN . speed (High) MV Motore ventilatore – Fan motor C Condensatore – Capacitor AUTR Autotrasformatore – Autotransformer BT2 Sonda acqua – Water sensor ACCESSORI – ACCESSORIES YV1 Valvola batteria principale – Main coil valve YV2 Valvola batteria aggiuntiva – Secondary coil valve 1 L L Valvola Valve L 8 BU 7 BN N N IG L 5 6 7 L 3 4 UNITA’ 2-TUBI: Eseguire questo collegamento sempre in caso di una sola valvola. FANcoIL coNTRoLS PSW wall-mounted control The PsW control is used to regulate the airflow (3 speeds).Water L 10 9 8 7 1 BU YV2 BN BU YV1 BN 6 5 4 3 2 1 L N PE BU RD Com Max WH Med BN Min AUTR 2 BT2 5 6 7 L 2 3 4 L GNYE Giallo/Verde-Yellow/Green WH Bianco . speed (Low) Med Velocità Media .Med.Min.Neutral PE Terra . select the summer/winter mode of operation and switch the fan-coil on/off and hot start function by minimun thermostat kit.Brown RD Rosso – Red BU Blu .Blue L Fase (linea 230V~) .Earth Com Comune ventilatore . Water 10 9 8 2 1 7 BU YV2 BN BU YV1 BN 6 5 4 3 2 L N PE BT2 7 L GNYE Giallo/Verde-Yellow/Green WH Bianco . 2-PIPES UNIT: Always carry out this connection when there is just one valve.Thermomagnetic switch (by the customer) A_LIFE2_0102_1004_201306_EN C .Max. Temperature selector Adjust the temperature as required by turning the temperature selector from +14°C to 30°C. FANcoIL coNTRoLS MTW wall-mounted control The MTW control is used to regulate the air (3 speeds). to select the summer/winter mode of operation and to switch the fan-coil on/off.Phase (230V~line) N Neutro . Led Blue Led: indicates fan-coil thermostat call Function selector Cooling heating off Fan selector Maximum fan speed Medium fan speed Minimum fan speed Electrical connections J2 UNITA’ 2-TUBI: Eseguire questo collegamento sempre in caso di una sola valvola.Common of the fan Min Velocità Minima .White BN Marrone . speed (Medium) Max Velocità Massima .a-LIFE2 13.Med. 4 5 6 L 1 2 3 Acqua .Brown RD Rosso – Red BU Blu .Earth Com Comune ventilatore .Min.Blue L Fase (linea 230V~) . the temperature through electronic thermostat. speed (High) MV Motore ventilatore – Fan motor C Condensatore – Capacitor AUTR Autotrasformatore – Autotransformer BT1 Sonda aria – Air sensor BT2 Sonda acqua – Water sensor ACCESSORI – ACCESSORIES YV1 Valvola batteria principale – Main coil valve YV2 Valvola batteria aggiuntiva – Secondary coil valve L L BN 9 8 Valvola Valve L 7 BU L 8 N N 1 BU RD Com Max WH Med BN Min AUTR 7 IG L 4 5 6 L 3 MV GNYE 230V~50/60Hz IG 29 Interruttore di protezione (a cura del cliente) .Neutral PE Terra . speed (Low) Med Velocità Media . Common of the fan Min Velocità Minima . speed (Medium) Max Velocità Massima .Max.Neutral PE Terra .Min.Thermomagnetic switch (by the customer) SA1 Contatto multifunzionale (a cura del cliente) . speed (Low) Med Velocità Media . to select the summer / winter / auto mode of operation and to switch the fan-coil on / off.Phase (230V~line) N Neutro .Earth Com Comune ventilatore . The repeated pressure of fan button determines speed required. Maximum fan speed Medium fan speed Minimum fan speed Automatic fan speed Led Blue LED: heating / Cooling plus regulator call Blue LED blinking: hot start / Too Cool function active Blue LED: operation in Cooling mode Blue LED: operation in heating mode Blue LED: automatic cooling / heating mode selection Electrical connections Collegamento con accessorio Resistenza elettrica 230V~50/60Hz GNYE Giallo/Verde-Yellow/Green WH Bianco .a-LIFE2 13. FANcoIL coNTRoLS ATW wall-mounted control The ATW control is used to regulate the air (3 speeds + auto). speed (High) MV Motore ventilatore – Fan motor C Condensatore – Capacitor AUTR Autotrasformatore – Autotransformer BT1 Sonda aria – Air sensor BT2 Sonda acqua – Water sensor ACCESSORI – ACCESSORIES YV1 Valvola batteria principale – Main coil valve YV2 Valvola batteria aggiuntiva – Secondary coil valve 1 Kit GATEWAY AT TTL 2 3 4 10 9 GATEWAY 8 TTL J5 2 7 1 5 AT TTL 4 3 2 BUS-ADAPTER TTL L N PE J5 BU YV2 BN BU YV1 BN 6 BUS BTICINO Kit BUS-ADAPTER BT2 5 6 7 L Safety Thermostats: TS1automatic reset TS2manual reset L TS2 L TS1 L L BU BU Termostati Sicurezza: TS1riamo automatico TS2riarmo manuale L 9 13 12 SA1 9 Acqua . – El. Function selector select the mode of operation pushing the button. Temperature selector Adjust the temperature as required by turning the temperature selector from +14°C to 30°C.White Marrone .Water 8 Power Max = WH-RD RD N L N 10 BK Power Min = BK-RD IG L 11 Resist.Black L Fase (linea 230V~) .Multifunctional contact (by the customer) A_LIFE2_0102_1004_201306_EN C .el.Blue BU BK Nero . Mode led Cooling heating off Automatic setting Speed button select the fan speed pushing the button.heater 1 BU RD Com Max WH Med BN Min MV GNYE 230V~50/60Hz BUS L 12 WH N Relay 5 6 7 AUTR Connection with accessory Electrical heater 3 4 230V~ 30 IG Interruttore di protezione (a cura del cliente) . the temperature through electronic thermostat.Med.Red Blu .Brown BN RD Rosso . Angular plenum kit for air outlet (90°) Made in galvanised sheet metal. PWM. Life2 Box is placed in the wall niche arranging in advance hydraulic connections. 0-10V and suitable for 2-pipe systems. The kit is suitable for horizontal fan coil installations. only available as accessories. This kit may be used to stop the flow of water of the additional coil in the fan coils. Rear panel for vertical housing kit This kit covers the back side of the fan coil with cabinet. ACCESSORIES LIFE2 BOX Kit composed by formwork. Suitable for horizontal and vertical built-in installations. Straight plenum kit for air inlet Made in galvanised sheet metal. PWM. Using the controls with the additional coil valve kit. Motor drive for external air intake lock Motor drive for automatic adjustment of the fresh air intake lock or damper. not fitted on the unit. this kit allows air conveyance into ducts lying at 90° to the fan coil outlet. Interface SPB kit The SPB interface kit is used for multiple connection of hydronic terminal units. Air intake grid with filter Grid with simple filter removal in order to easify cleaning maintenance without access directly to the fan coil installed into the duct. Additional coil 2-way valve unit 1/2" kit Kit with copper fittings and electromechanical actuator (oNoff) 230V. Main coil 3-way valve unit with by-pass way (4 idraulic connections) 1/2" and 3/4” kit Kit with copper fittings and electromechanical actuator (oNoff) 230V. 31 A_LIFE2_0102_1004_201306_EN . Hose kit The hose kit is a manifold coupling for connecting the fan coil to the main water system. The electromechanical actuator is NC. Straight plenum kit for air outlet Made in galvanised sheet metal. it is necessary to installation separate from the wall. frame and manual flap. for correct installation. 0-10V and suitable for 4-pipe systems. this kit allows air conveyance into ducts in horizontal and vertical built-in installations. cover panel. The quantity of air put into the room varies from 0 to approx. The user can not access to the terminal block. Pair of decorative and structural feet Plastic feet. Horizontal Fan Coil auxiliary tray Made in thermoplastic material. the additional coil may be regulated by selecting the suitable mode of operation. this pan collects the condensate that forms during cooling operation. PWM. Manual damper kit for fresh air intake. this kit allows air conveyance into round ducts in horizontal and vertical built-in installations. The electromechanical actuator is NC.a-LIFE2 14. PWM. Plenum kit with roud air ducts Made in galvanised sheet metal. this kit allows air conveyance into ducts in horizontal and vertical built-in installations. Suitable for horizontal and vertical built-in installations. This kit supports fan coil with cabinet. granting a uniform colour and design. All components are in galvanised steel varnished finish. which may be managed with a single control. 30% of the volume handled by the fan coil. 0-10V and suitable for 4-pipe systems. Main coil 2-way valve unit 1/2" and 3/4" kit Kit with copper fittings and electromechanical actuator (oNoff) 230V. The electromechanical actuator is NC. 0-10V and suitable for 2-pipe systems. This kit may be used to divert the flow of water of the main coil in the fan coils. This kit may be used to stop the flow of water of the main coil in the fan coils. This kit is used to control the external fresh air that is put into the room. with cabinet. this tray collects the condensate that forms during summer operation. Angular plenum kit for air inlet (90°) Made in galvanised sheet metal. At work finished the fan-coil is positionate inside the structure. this kit allows air conveyance into ducts lying at 90° to the fan coil outlet. Additional coil 3-way valve unit with by-pass way (4 idraulic connections) 1/2" kit Kit with copper fittings and electromechanical actuator (oNoff) 230V. Air outlet grid Grid with orientable louvers for installation in ducted system. install an SPB interface on every terminal unit. Vertical Fan Coil auxiliary tray Made from insulated galvanised sheet metal. Water circuit kits Water circuit kits complete with copper pipes and 2 ball valves. Hot water coil kit The additional hot water 1 row is installed on top of the main coil in the four-pipe systems. This kit may be used to divert the flow of water of the additional coil in the fan coils. The electromechanical actuator is NC. Air intake grille for enclosed versions Used to mask the lower part of the fan coil. front closing panel and frame with manually adjustable flap.247 A 7 Modelli LIFE2 A (mm) B (mm) 0102 0104 812 740 0202 0204 812 740 40 103 660 739 70 102 40 40 • The kit consists of a galvanised sheet metal structure. 206 1012 7 240 B 32 A_LIFE2_0102_1004_201306_EN 0302 0304 1012 940 0402 0404 1012 940 0502 0504 1212 1140 0602 0604 1212 1140 .a-LIFE2 14. it is available for sizes 102÷602 .coils. thus simplifying the operations to be performed on site. The fan coil is fitted inside the structure when the work has been completed. 240-max. min. vertical outlet. The kit is available in the galvanised sheet metal version and the coated version (RAL9010). DLi version: low air inlet.104÷604. AccESSoRIES LIFE2 BoX LiFE2 BoX is a wall-mounted accessory that allows users to prepare the fan coil water and electrical connections in advance. • LiFE2 BoX can house LiFE2 fan. 2 WAYS MAIN coIL KIT VALVE 3/4" ANd ModULANTING AcTUAToR 0-10V 2 WAY AddITIoNAL coIL KIT VALVE 3/4" ANd ModULANTING AcTUAToR 0-10V 33 2 WAY MAIN ANd AddITIoNAL coIL KIT VALVE WITh BY PASS 1/2”-3/4” ANd ModULANTING AcTUAToR 0-10V A_LIFE2_0102_1004_201306_EN .2 WAYS 1/2” FITTINGS The water flow to be diverted for fan coil. install hB power board with control board 0-10V on fan-coil's side.2 WAYS 3/4” FITTINGS The water flow to be diverted for fan coil.a-LIFE2 14. Main coil or additional coil 2-ways valve kit allow valve unit 0-10V could be managed directly with Climaveneta's controls. install hB power board with control board 0-10V on fan-coil's side. AccESSoRIES VALVE KIT ModULANTING 0-10V . Main coil or additional coil 2-ways valve kit allow valve unit 0-10V could be managed directly with Climaveneta's controls. 2 WAYS MAIN coIL KIT VALVE 1/2" ANd ModULANTING AcTUAToR 0-10V 2 WAY AddITIoNAL coIL KIT VALVE 1/2" ANd ModULANTING AcTUAToR 0-10V 2 WAY MAIN ANd AddITIoNAL coIL KIT VALVE WITh BY PASS 1/2”-1/2” ANd ModULANTING AcTUAToR 0-10V VALVE KIT ModULANTING 0-10V . a-LIFE2 14.PWM) This valve kit allows the main coil water flow to be diverted for fan coil with centrifugal fan. 2 WAYS MAIN coIL KIT VALVE 1/2" + AcTUAToR 230V 2 Way additional Coil Kit valve 1/2" + aCtUatoR 230v 2 Way Main and additional Coil Kit valve With by Pass 1/2''-1/2'' + aCtUatoR 230v MAIN coIL VALVE KIT . AccESSoRIES MAIN coIL VALVE KIT . 2 WAYS MAIN coIL KIT VALVE 3/4” 2 WAY AddITIoNAL coIL KIT VALVE 1/2” 34 2 WAY MAIN ANd AddITIoNAL coIL KIT VALVE WITh BY PASS 3/4” ANd 1/2” A_LIFE2_0102_1004_201306_EN .1/2" FITTINGS (oN/oFF .PWM) This valve kit allows the main coil water flow to be diverted for fan coil with centrifugal fan.2 WAY .2 WAY .3/4" FITTINGS (oN/oFF . 3 WAYS .1/2” FITTINGS The water flow to be diverted for fan coil.a-LIFE2 14. install hB power board with control board 0-10V on fan-coil's side. 3 WAYS MAIN coIL KIT VALVE WITh BY PASS 3/4" ANd ModULANTING AcTUAToR 0-10V 3 WAY AddITIoNAL coIL KIT VALVE WITh 1/2" BYPASS ANd ModULANTING AcTUAToR 0-10V 35 3 WAY MAIN ANd AddITIoNAL coIL KIT VALVE WITh BY PASS 3/4” ANd 1/2” ANd ModULANTING AcTUAToR 0-10V A_LIFE2_0102_1004_201306_EN . AccESSoRIES VALVE KIT ModULANTING 0-10V .3/4” FITTINGS The water flow to be diverted for fan coil. install hB power board with control board 0-10V on fan-coil's side. Main coil or additional coil 3-ways valve kit allow valve unit 0-10V could be managed directly with Climaveneta's controls. Main coil or additional coil 3-ways valve kit allow valve unit 0-10V could be managed directly with Climaveneta's controls.3 WAYS . 3 WAYS MAIN coIL KIT VALVE 1/2" + BYPASS 1/2” + ModULANTING AcTUAToR 0-10V 3 WAY AddITIoNAL coIL KIT VALVE 1/2" + BY-PASS 1/2” + ModULANTING AcTUAToR 0-10V 3 WAY MAIN ANd AddITIoNAL coIL KIT VALVE WITh BY PASS 1/2”-1/2” + ModULANTING AcTUAToR 0-10V VALVE KIT ModULANTING 0-10V . 3/4" FITTINGS (oN/oFF .3 WAY . 3 WAY AddITIoNAL coIL KIT VALVE WITh 1/2" BYPASS 3 WAYS MAIN coIL KIT VALVE WITh BY PASS 3/4" 36 3 WAY MAIN ANd AddITIoNAL coIL KIT VALVE WITh BY PASS 3/4” ANd 1/2'' A_LIFE2_0102_1004_201306_EN .a-LIFE2 14. AccESSoRIES MAIN coIL VALVE KIT .PWM) The valve kit allows the main coil water flow to be diverted for fan coil with centrifugal fan.1/2" FITTINGS (oN/oFF . 3 WAYS MAIN coIL KIT VALVE WITh 1/2" BYPASS + AcTUAToR 3 WAYS AddITIoNAL coIL KIT VALVE WITh BY PASS 1/2" + AcTUAToR 3 WAY MAIN ANd AddITIoNAL coIL KIT VALVE WITh BY PASS 1/2”-1/2'' + AcTUAToR MAIN coIL VALVE KIT .PWM) The valve kit allows the main coil water flow to be diverted for fan coil with centrifugal fan.3 WAY . a-LIFE2 14. 37 A_LIFE2_0102_1004_201306_EN . AccESSoRIES WATER KIT FoR 2-WAYS VALVE 1/2" FITTING WATER KIT FoR 2-WAYS VALVE 3/4" FITTING WATER KIT FoR 3-WAYS VALVE + BY-PASS 1/2" FITTING WATER KIT FoR 3-WAYS VALVE + BY-PASS 3/4" FITTING AddITIoNAL hoT WATER coIL KIT This accessory kit is used for heating mode in four-pipe systems. 1 4 0402 0404 600 300 2 0502 0504 800 400 2 0602 0604 800 400 2 0702 0704 1000 350 3 A_LIFE2_0102_1004_201306_EN 0802 0804 1000 350 3 0902 0904 1200 300 4 1002 1004 1200 300 4 . 1 4 0402 0404 600 625 637 0502 0504 800 825 837 0602 0604 800 825 837 0702 0704 1000 1025 1037 0802 0804 1000 1025 1037 0902 0904 1200 1225 1237 1002 1004 1200 1225 1237 90° PLENUM 140 A description 90° plenum self-tapping screws Ø 3.5x9.5 a-LIFE2 200 A (mm) 0102 0104 400 0202 0204 400 0302 0304 600 Qty.5x9.5x9. 1 4 0402 0404 600 0502 0504 800 0602 0604 800 0702 0704 1000 0802 0804 1000 0902 0904 1200 1002 1004 1200 RoUNd PIPES PLENUM Ø 160-180-200 A 215 description Round pipes plenum self-tapping screws Ø 3.5 a-LIFE2 B 15 0 A (mm) B (mm) N. pipes 38 0102 0104 400 / 1 0202 0204 400 / 1 0302 0304 600 300 2 Qty.a-LIFE2 14. AccESSoRIES AIR SUPPLY PLENUM KIT The plenum kit allows connection to the ductwork. STRAIGhT PLENUM 1 14 66 1 100 B A description straight plenum self-tapping screws Ø 3.5 C a-LIFE2 A (mm) B (mm) c (mm) 0102 0104 400 425 437 0202 0204 400 425 437 0302 0304 600 625 637 Qty. a-LIFE2 14. AccESSoRIES STRAIGhT PLENUM: Made of galvanized steel. optional suitable for installation on all concealed versions without cabinet. 90° PLENUM (PM 90°) 50 H = 450 90 15 15 90 200 110 S = 215 200 215 L 15 15 L 140 Flangia da 15 mm 15 mm flange 15 15 140 15 15 L H = 450 140 Flangia da 15 mm 15 mm flange Dimensioni in mm Dimensions in mm Model Dimensions L (mm) 2 pipe system (1 coil) 4 pipe system (2 coil) LIFE2 100-200 400 LiFE2 102-202 LiFE2 104-204 LIFE2 300-400 600 LiFE2 302-402 LiFE2 304-404 39 LIFE2 500-600 800 LiFE2 502-602 LiFE2 504-604 LIFE2 700-800 1000 LiFE2 702-802 LiFE2 704-804 A_LIFE2_0102_1004_201306_EN LIFE2 900-1000 1200 LiFE2 902-1002 LiFE2 904-1004 . it is used to convery the air supply on the concealed units. optional suitable for installation on all concealed versions without cabinet. STRAIGhT PLENUM (PM) H = 450 15 100 15 S = 215 100 Flangia da 15 mm 15 mm flange 140 140 60 L 15 15 15 15 L L 15 Flangia da 15 mm 15 mm flange H = 450 140 100 15 Dimensioni in mm Dimensions in mm Model Dimensions L (mm) 2 pipe system (1 coil) 4 pipe system (2 coil) LIFE2 100-200 400 LiFE2 102-202 LiFE2 104-204 LIFE2 300-400 600 LiFE2 302-402 LiFE2 304-404 LIFE2 500-600 800 LiFE2 502-602 LiFE2 504-604 LIFE2 700-800 1000 LiFE2 702-802 LiFE2 704-804 LIFE2 900-1000 1200 LiFE2 902-1002 LiFE2 904-1004 90° PLENUM: Made of galvanized steel. it is used to convery the air supply on the concealed units. x Ø 160-180-200 150 L H = 450 215 150 50 45 45 = Ø 160 Ø 180 S = 215 = 15 Dimensioni in mm Dimensions in mm Model LIFE2 100-200 Dimensions A (mm) / Dimensions L (mm) 400 N° x d. AccESSoRIES RoUNd PIPES PLENUM: Made of galvanized steel + internal Thermal-acoustic insulation. (mm) 1x 2 pipe system (1 coil) LiFE2 102-202 4 pipe system (2 coil) LiFE2 104-204 Spigots (made of plastic material): Ø 160.a-LIFE2 14. 200 LIFE2 300-400 300 600 2x LiFE2 302-402 LiFE2 304-404 40 LIFE2 500-600 400 800 2x LiFE2 502-602 LiFE2 504-604 LIFE2 700-800 350 1000 3x LiFE2 702-802 LiFE2 704-804 A_LIFE2_0102_1004_201306_EN LIFE2 900-1000 300 1200 4x LiFE2 902-1002 LiFE2 904-1004 . it is used to convery the air supply on the concealed units. RoUNd PIPES PLENUM Ø 160-180-200 L A/2 A A/2 H = 450 15 150 140 Ø 200 Ø 215 No. 180. optional suitable for installation on all concealed versions without cabinet. STRAIGhT PLENUM 1 14 66 1 100 B A description Straight plenum self-tapping screws Ø 3.5x9. 1 4 0402 0404 600 0502 0504 800 0602 0604 800 0702 0704 1000 0802 0804 1000 0902 0904 1200 1002 1004 1200 RoUNd PIPES PLENUM Ø 160-180-200 A 215 description Round pipes plenum self-tapping screws Ø 3.5x9.5 a-LIFE2 15 B 0 A (mm) B (mm) N.5x9. pipes 41 0102 0104 400 / 1 0202 0204 400 / 1 0302 0304 600 300 2 Qty.5 a-LIFE2 200 A (mm) 0102 0104 400 0202 0204 400 0302 0304 600 Qty. AccESSoRIES PLENUM KIT FoR AIR oUTLET The plenum kit allows connection to the ductwork.5 C a-LIFE2 A (mm) B (mm) B (mm) 0102 0104 400 425 437 0202 0204 400 425 437 0302 0304 600 625 637 Qty. 1 4 0402 0404 600 300 2 0502 0504 800 400 2 0602 0604 800 400 2 0702 0704 1000 350 3 A_LIFE2_0102_1004_201306_EN 0802 0804 1000 350 3 0902 0904 1200 300 4 1002 1004 1200 300 4 . 1 4 0402 0404 600 625 637 0502 0504 800 825 837 0602 0604 800 825 837 0702 0704 1000 1025 1037 0802 0804 1000 1025 1037 0902 0904 1200 1225 1237 1002 1004 1200 1225 1237 90° PLENUM 140 A description 90° plenum self-tapping screws Ø 3.a-LIFE2 14. STRAIGhT PLENUM (PM) 100 15 140 140 37. it is used to convery the air intake on the concealed units. AccESSoRIES STRAIGhT PLENUM: Made of galvanized steel. 90° PLENUM (PM 90°) L 90 50 15 H = 450 S = 215 215 110 200 90 15 15 15 140 Flangia da 15 mm 15 mm flange H = 450 200 15 L 15 L Model Dimensions L (mm) 2 pipe system (1 coil) 4 pipe system (2 coil) 15 15 140 140 Dimensioni in mm Dimensions in mm LIFE2 100-200 400 LiFE2 102-202 LiFE2 104-204 Flangia da 15 mm 15 mm flange LIFE2 300-400 600 LiFE2 302-402 LiFE2 304-404 42 LIFE2 500-600 800 LiFE2 502-602 LiFE2 504-604 LIFE2 700-800 1000 LiFE2 702-802 LiFE2 704-804 A_LIFE2_0102_1004_201306_EN LIFE2 900-1000 1200 LiFE2 902-1002 LiFE2 904-1004 . it is used to convery the air intake on the concealed units. optional suitable for installation on all concealed versions without cabinet. optional suitable for installation on all concealed versions without cabinet.5 15 15 L 15 15 100 H = 450 140 Flangia da 15 mm 15 mm flange L 100 Flangia da 15 mm 15 mm flange 15 L Dimensioni in mm Dimensions in mm 15 Model Dimensions L (mm) 2 pipe system (1 coil) 4 pipe system (2 coil) LIFE2 100-200 400 LiFE2 102-202 LiFE2 104-204 LIFE2 300-400 600 LiFE2 302-402 LiFE2 304-404 LIFE2 500-600 800 LiFE2 502-602 LiFE2 504-604 LIFE2 700-800 1000 LiFE2 702-802 LiFE2 704-804 LIFE2 900-1000 1200 LiFE2 902-1002 LiFE2 904-1004 90° PLENUM: Made of galvanized steel.a-LIFE2 14.5 15 H = 450 S = 215 37. 180. RoUNd PIPES PLENUM Ø 160-180-200 L A/2 A A/2 140 15 150 H = 450 S = 215 Ø 160 Ø 180 215 Ø 200 = 15 = 150 H = 450 215 Filtro aria Air filter 45 45 50 150 No. it is used to convery the air intake on the concealed units. x Ø 160-180-200 L Dimensioni in mm Dimensions in mm Model LIFE2 100-200 Dimensions A (mm) / Dimensions L (mm) 400 N° x d. AccESSoRIES RoUNd PIPES PLENUM: Made of galvanized steel + internal Thermal-acoustic insulation. 200 LIFE2 300-400 300 600 2x LiFE2 302-402 LiFE2 304-404 43 LIFE2 500-600 400 800 2x LiFE2 502-602 LiFE2 504-604 LIFE2 700-800 350 1000 3x LiFE2 702-802 LiFE2 704-804 A_LIFE2_0102_1004_201306_EN LIFE2 900-1000 300 1200 4x LiFE2 902-1002 LiFE2 904-1004 .a-LIFE2 14. (mm) 1x 2 pipe system (1 coil) LiFE2 102-202 4 pipe system (2 coil) LiFE2 104-204 Spigots (made of plastic material): Ø 160. optional suitable for installation on all concealed versions without cabinet. AccESSoRIES 100 FEET KIT The feet kit allows the fan coils with housing to be placed on the ground. 186. AUXILIARY coNdENSATE TRAY KIT FoR VERTIcAL INSTALLATIoN The auxiliary condensate tray is designed to collect the condensate which forms on coil connections during operation in the cooling mode.a-LIFE2 14.5 186.5 REAL PANEL FoR VERTIcAL hoUSING This accessory kit covers the back side of the fan coil with cabinet. 44 A_LIFE2_0102_1004_201306_EN 232.7 . AUXILIARY coNdENSATE TRAY KIT FoR hoRIZoNTAL INSTALLATIoN The auxiliary condensate tray is designed to collect the condensate which forms on coil connections during operation in the cooling mode. Accessory is provided with air filter.a-LIFE2 14. SIGILLARE CON MASTICE DI TENUTA SEAL WITH MASTIC SEALING AIR INTAKE GRId WITh FILTER Kit accessory for air inlet of duct system. 70 B 180 130 10 80 A GRIGLIA / GRILLE FILTRO ARIA / AIR FILTER TELAIO DI CONTENIMENTO FILTRO FRAME FILTER a-LIFE2 A (mm) B (mm) 45 0102 0104 400 450 0202 0204 400 450 0302 0304 600 650 0402 0404 600 650 0502 0504 800 850 0602 0604 800 850 A_LIFE2_0102_1004_201306_EN 0702 0704 1000 1050 0802 0804 1000 1050 0902 0904 1200 1250 1002 1004 1200 1250 . AccESSoRIES SPB INTERFAcE KIT 60 mm 90 mm 71 mm hoSE coNNEcTIoN KIT The hose kit is a header connection for connecting the fan coil to the mains water supply. The air intake damper can be installed on LiFE2 fan coils with air intake from below. KIT c – Motor for fresh air intake damper KIT A – Manual fresh air intake damper kit.9X9. 30% of the volume handled by the fan coil.9x9. dAMPER FoR UNITS WITh cASING KIT A (manual damper) KIT B (motorised damper) MOTORE SERRANDA FISSARE VITE DA Ø3. The kit is used to adjust the amount of fresh air introduced into the environment. 1002 1004 1200 1250 KIT B – Motorised fresh air intake damper kit.a-LIFE2 130 45 B 80 180 AIR oUTLET GRILLE Kit accessory is used for air outlet in duct system. The amount of fresh air introduced varies from 0 to approx. AccESSoRIES A 0102 0202 0302 0402 0502 0602 0702 0802 0902 0104 0204 0304 0404 0504 0604 0704 0804 0904 A (mm) 400 400 600 600 800 800 1000 1000 1200 B (mm) 450 450 650 650 850 850 1050 1050 1250 a-LIFE2 FRESh AIR INTAKE dAMPER KIT La serranda di ripresa aria può essere installata nei fan-coil LiFE2 con ripresa aria inferiore in versione mantellata o incasso. in the version with casing or built-in. 11 14.2 DADI da 6MA FISSAGGIO SU PERNO dAMPER FoR BUILT-IN UNITS KIT A (manual damper) KIT B (motorised damper) FASTEN THE DAMPER OPENING WITH THE Ø3.5 SCREW DAMPER MOTOR 2 X 6MA NUTS FOR FASTENING ON THE PIN 46 A_LIFE2_0102_1004_201306_EN . Motor for motorised damper position adjustment.5 IN BASE ALL'APERTURA DELLA SERRANDA Nr. Air grille has adjustable louvers. The two kits are supplied separately with their own product codes. speed (Low) Med Velocità Media .Thermomagnetic switch IG L Potenza . speed (High) MV Motore ventilatore – Fan motor C Condensatore – Capacitor AUTR Autotrasformatore – Autotransformer ACCESSORI – ACCESSORIES YV1 Valvola batteria principale – Main coil valve Valvola batteria aggiuntiva – Secondary coil valve YV2 A CURA DEL CLIENTE . Air intake grid for with cabinet is suitable for DLMV version (with cabinet and bottom air inlet).Min. El. speed (Medium) Max Velocità Massima .Brown RD Rosso .Med.Red BU Blu .el.BY THE CUSTOMER Comando remoto .Common of the fan Min Velocità Minima .Black L Fase (linea 230V~) .Earth Com Comune ventilatore .White BN Marrone . 100 A B 0102 0202 0302 0402 0502 0602 0702 0802 0104 0204 0304 0404 0504 0604 0704 0804 A (mm) 922 922 1112 1112 1302 1302 1492 1492 B (mm) 566 566 756 756 946 946 1136 1136 LIFE2 0902 0904 1682 1326 1002 1004 1692 1326 “MRS1” TERMINAL BLocK KIT FoR ASYNchRoNoUS Fc • Terminal block featuring a number of terminals based on unit configuration (min.12) • Wiring according to the requirements of the configuration Safety Thermostats: TS1 automatic reset TS2 manual reset Connection with accessory Electrical heater GNYE Giallo/Verde-Yellow/Green WH Bianco .a-LIFE2 14.Power N 12 BK 11 N L TS1 BU BU 9 N L Resist.Remote control CR Interruttore di protezione .Neutral PE Terra .Max.heater WH 10 L CR Relay 10 9 8 7 RD TS2 BU YV2 BN BU YV1 BN 6 N IG N L L L L PE 47 5 4 3 2 1 BU RD Com Max WH Med BN Min GNYE A_LIFE2_0102_1004_201306_EN AUTR Termostati Sicurezza: TS1 riamo automatico TS2 riarmo manuale Collegamento con accessorio Resistenza elettrica 230V~50/60Hz Power Max = WH-RD 230V~50/60Hz Power Min = BK-RD MV C . AccESSoRIES AIR INTAKE GRId FoR WITh cABINET VERSIoN Kit accessory allows to cover space between feet of LiFE2 fan coil.Phase (230V~line) N Neutro . (max PE+…. PE+1+2+3+4) .Blue BK Nero . Air intake grille is painted as fan coil cabinet’s colour (RAL 9003) ensuring suitable and desired aesthetic solution.Power N Potenza . 9 120 42 178 155 69 Ø20 336 230 0102 0104 430 400 450 425 Modello a-LIFE2 A (mm) B (mm) c (mm) d (mm) 120 48 120 15 430 400 450 425 0202 0204 630 600 650 625 0302 0304 630 600 650 625 0402 0404 830 800 850 825 0502 0504 830 800 850 825 0602 0604 D C 1030 1000 1050 1025 0702 0704 1030 1000 1050 1025 0802 0804 33 1230 1200 1250 1225 0902 0904 1230 1200 1250 1225 1002 1004 Ø16 Ø10 a-LIFE2 15.A_LIFE2_0102_1004_201306_EN 25 15 25 A B Attacchi idraulici 1/2'' GF Water connections 1/2'' Female 25 15 450 15 185.8 15. dIMENSIoNAL dATA ANd WATER coNNEcTIoNS (VERToIcAL VERSIoN) Fan coils have been designed and made for installation in heating and air-conditioning systems. .8 217 450 30 120 15 134 261 175. 8 15.A_LIFE2_0102_1004_201306_EN 12 204. dIMENSIoNAL dATA ANd WATER coNNEcTIoNS (hoRIZoNTAL VERSIoN) Fan coils have been designed and made for installation in heating and air-conditioning systems. .8 134 261 0102 0104 430 400 450 425 545 A (mm) B (mm) c (mm) d (mm) E (mm) 430 400 450 425 545 0202 0204 630 600 650 625 745 0302 0304 630 600 650 625 745 0402 0404 830 800 850 825 945 830 800 850 825 945 E 0602 0604 D C 0502 0504 Attacchi idraulici 1/2'' GF Water connections 1/2'' Female Modello a-LIFE2 120 42 178 155 69 336 106 30 230 120 49 30 15 0802 0804 1030 1000 1050 1025 1145 0702 0704 1030 1000 1050 1025 1145 33 1230 1200 1250 1225 1345 0902 0904 1230 1200 1250 1225 1345 1002 1004 Ø16 Ø10 a-LIFE2 15.8 210 33 105 75 25 Ø20 E 600 630 40 15 450 15 185. c.9x9. move the room temperature probe to the opposite side. d. Tighten the 4 x Ø 3. open the knock-outs on the opposite shoulder “9”. as shown in the figure “10”. Unscrew the 4 x Ø 3.coil bracket “11”. 7 to pos. F. Remove the transformer and the terminal block and reposition them on the opposite side. follow the previous instructions.5 screws in the holes aligning the shoulder . making sure it is secured in place. h. INSTRUcTIoNS To MoVE ThE MAIN coIL FRoM LEFT To RIGhT oN VERTIcAL FAN coILS 1 8 D A G 14 1 13 7 14 9 10 2 B H E 15 3 4 C F 11 6 12 5 Premere sul fermo e ruotare per togliere l'imbuto A. insert the coil at an angle. 8. B. G. on the right and left shoulders. 50 A_LIFE2_0102_1004_201306_EN . inserting the water connections through the openings made. Move the coil from pos.9x9. Reposition the panel “13” and tighten the 4 x Ø 3.5 screws Remove the panel in the direction indicated by the arrow “2”. Use closed-cell insulation to cover in the holes left open on the left shoulder “15”. Unscrew the 4 x Ø 3.9x9.5 screws “3” that support the coil from the left and right shoulders. INSTRUcTIoNS To MoVE ThE MAIN coIL FRoM RIGhT To LEFT oN VERTIcAL FAN coILS To invert the position of the coil. If the room temperature probe cable is not long enough. remove the controller complete with fastening bracket. If the controller is installed on the unit. Press the catch that holds the funnel “6” to release it.a-LIFE2 INVERTING ThE WATER coNNEcTIoNS WARNING! Run the electrical wiring on the opposite side to the final water connections.9x9. slightly tilt the coil in the direction indicated by the arrow “4” and move it away from the left shoulder in the direction indicated by arrow “5”.5 screws “14”. swapping the references to the right shoulder and left shoulder. Remove the knock-out “12” and insert the funnel. E. 6 to pos.9x9. B. Tighten the 4 x Ø 3.5 screws Remove the panel in the direction indicated by the arrow “2”. remove the controller complete with fastening bracket.9x9. Unscrew the 4 x Ø 3. follow the previous instructions.5 1 11 6 8 2 9 12 E B H 3 13 12 4 F C 10 5 A. ensuring the distance of 96.coil bracket “10”. 51 A_LIFE2_0102_1004_201306_EN . Remove the transformer and the terminal block and reposition them on the opposite side. as shown in the figure “9”. open the knock-outs on the opposite shoulder “8”. INSTRUcTIoNS To MoVE ThE MAIN coIL FRoM LEFT To RIGhT oN hoRIZoNTAL FAN coILS: 1 7 D A G 96 . Use closed-cell insulation to cover in the holes left open on the left shoulder “13”.5 screws “3” that support the coil from the left and right shoulders. insert the coil at an angle. Reposition the panel “11”. Tighten the 4 x Ø 3. inserting the water connections through the openings made. If the controller is installed on the unit.9x9. 7. Move the coil from pos.5 screws “12”. E. swapping the references to the right shoulder and left shoulder. on the right and left shoulders. slightly tilt the coil in the direction indicated by the arrow “4” and move it away from the left shoulder in the direction indicated by arrow “5”. move the room temperature probe to the opposite side. INSTRUcTIoNS To MoVE ThE MAIN coIL FRoM RIGhT To LEFT oN hoRIZoNTAL FAN coILS To invert the position of the coil.a-LIFE2 INVERTING ThE WATER coNNEcTIoNS WARNING! Run the electrical wiring on the opposite side to the final water connections.9x9. G. d.5 mm. c. If the room temperature probe cable is not long enough. Unscrew the 4 x Ø 3. F. h. as shown in the figure.5 screws in the holes aligning the shoulder . a-LIFE2 15.5 233 A 1112 52 A_LIFE2_0102_1004_201306_EN 1002-1004 1682 1326 . dIMENSIoNAL dATA (WITh cABINET VERSIoN) mm mm 0102-0104 922 566 0202-0204 922 566 0302-0304 1112 756 0402-0404 1112 756 0502-0504 1302 946 0602-0604 1302 946 0702-0704 1492 1136 0802-0804 1492 1136 0902-0904 1682 1326 547 599 499 A 100 a-LIFE2 dLMV A B 186. 7 0802-0804 230 ~ 50 3130 13.6 0202-0204 230 ~ 50 1045 4.20 0302-0304 230 ~ 50 60 0.9 0602-0604 230 ~ 50 1563 6.30 0402-0404 230 ~ 50 60 0.30 0702-0704 230 ~ 50 130 0. It is also recommended to check that: .3 0302-0304 230 ~ 50 1060 4. . line isolating switch.1 0702-0704 230 ~ 50 3130 13.9 1002-1004 230 ~ 50 3160 13. input (W) Max.73 Sizing table with HEATER power 1 a-LIFE2 Power supply Max.3 0202-0204 230 ~ 50 745 3.20 0202-0204 230 ~ 50 45 0.7 0402-0404 230 ~ 50 1060 4.4 0902-0904 230 ~ 50 2160 9.9 0402-0404 230 ~ 50 1560 6. The following is compulsory: Installation near the appliance of a delayed-action singlepole linked magnetothermal circuit breaker.7 0502-0504 230 ~ 50 1563 6.9 0502-0504 230 ~ 50 2063 9.60 0902-0904 230 ~ 50 160 0. absorbed current (A) 0102-0104 230 ~ 50 745 3.The characteristics of the mains electricity supply are suitable for the input indicated in the table below.60 0802-0804 230 ~ 50 130 0. which (with maximum values) should serve for sizing both the circuit breakers and the power cables (any other appliances working in parallel should also be taken into consideration). absorbed current (A) 0102-0104 230 ~ 50 45 0. ELECTRICAL CONNECTIONS The fan coil comes fully wired and only requires: .7 0902-0904 230 ~ 50 3160 13.9 0702-0704 230 ~ 50 2130 9. padlockable.6 0302-0304 230 ~ 50 1560 6.a-LIFE2 16.73 1002-1004 230 ~ 50 160 0.5 1002-1004 230 ~ 50 2160 9.1 0602-0604 230 ~ 50 2063 9.10%. Table electrical connections Sizing table a-LIFE2 Power supply Max.30 0602-0604 230 ~ 50 63 0. absorbed current (A) 0102-0104 230 ~ 50 1045 4.The supply voltage corresponds to the rated value +/. in compliance with CEI-EN standards (contact separation of at least 3 mm).30 0502-0504 230 ~ 50 63 0.4 0802-0804 230 ~ 50 2130 9.9 Sizing table with HEATER power 1 a-LIFE2 Power supply Max. input (W) Max. input (W) Max.5 53 A_LIFE2_0102_1004_201306_EN .Connecting to the mains electricity supply and to any room control. Bangalore 560008 India Tel:+91-80-42466900 .co.com .uk www.in Climaveneta UK LTD. Equipment Co Ltd 88 Bai Yun Rd.A. z o. zone 201419 Shanghai China Tel 008 621 575 055 66 Fax 008 621 575 057 97 Climaveneta Polska Sp.o.fr www.climaveneta. Shirley Solihull West Midlands B90 4NL Tel: +44 (0)871 663 0664 Fax: +44 (0)871 663 1664 Freephone: 0800 801 819 [email protected]. Village d’Entreprises ZA de la Couronne des Prés Avenue de la Mauldre 78680 Epône France Tel +33 (0)1 30 95 19 19 Fax +33 (0)1 30 95 18 18 [email protected] www.climaveneta.com www. Indiranagar.uk www. Highlands Road.climaveneta. Sienkiewicza 13A.com www.fr Climaveneta Deutschland GmbH Lyrenstraße 13 44866 Bochum Germany Tel +49 2327-95428-0 Fax +49 2327-95428-99 info@climaveneta. Pudong Xinghuo New dev. Via Sarson 57/c 36061 Bassano del Grappa (VI) Italy Tel +39 0424 509 500 Fax +39 0424 509 509 info@climaveneta. HAL 2nd stage. 05-120 Legionowo. 14th Main. Fax: +91-80-25203540 sales@climaveneta. 1 4 08036 Barcelona Spain Tel +34 934 195 600 Fax +34 934 195 602 [email protected] S.com Climaveneta France 3. Poland Tel +48 22 766 34 55-57 Fax +48 22 784 39 09 [email protected] Clima Londres 67.de Climaveneta España .pl Climaveneta Climate Technologies (P) Ltd #3487. Ul.climaveneta.de www.com Climaveneta Chat Union Refrig.