3M Electronics Assembly Solutions Product Selection Guide

3M Electronics Assembly SolutionsProduct Selection Guide for Building In Solutions Value Smart 3M Company, operating in more than 60 countries, has over 60,000 products. These products, based on 40 technology platforms, have been developed by 6,500 3M Product Developers Worldwide. Business Mission 3M Electronics is dedicated to continue building on our technologies and our expertise, and being your first choice for next-generation design, process, and materials solutions. 3M Electronics offers a broad range of specialized solutions for today’s demanding electronics assembly applications. From adhesives, tapes, abrasives and coatings to technologies designed to detect tampering and water intrusion, 3M offers you more ways to speed assembly... add functionality... and improve the reliability of your products. As a 3M customer, you’re backed by a global network of sales, manufacturing and technical resources – dedicated to helping you apply 3M technologies to their full advantage. Attaching Bonding Sealing Packaging Shipping Identifying Securing Protecting Lapping Polishing Conducting Damping Shielding Cleaning Contents Tapes Adhesives Abrasives Aerosol Cleaners Fasteners Protective Products Product Index 2-23 24-25 27-29 30-31 32 33 34-36 1 Tapes Specialty Products for Thermal Management Applications 3M™ Thermally Conductive Adhesive Transfer Tape % WetOut of Heat Sink to Glass Slide 8805 8810 3M™ Thermally Conductive Interface Pads: Silicone or Acrylic Elastomers 3M™ Hyper-Soft Thermally Conductive Interface Pads are used to transfer heat from a hot surface or device to a cooler surface region of the assembled design. The 3M Thermally Conductive pads are available in a silicone elastomer version or an acrylic elastomer version where a non-silicone base material is desired. The pads are designed in a variety of thermal conductivities and softness grades to provide excellent gap filling, low assembled stress and a high degree of wet-out for more efficient heat transfer. 50.1% 87.2% Surface Contact 95.1% 16.1% 3M™ Thermally Conductive Epoxies This range of liquid adhesives has minimal odor and superior structural adhesion strength. Dispensing is easy for high output, in-line automated manufacturing and manual application Adhesive flows and fills micro-spaces on surfaces. Ultra-thin bond line helps achieve low thermal impedance. 8815 (Boron Nitride Filler) Competitive Tape (Aluminum Oxide Filler) 3M Thermally Conductive Adhesive Transfer Tapes ™ Dark areas show adhesive wet-out. Increased wet-out improves both mechanical and thermal performance. Relative darker color indicates surface contact has occurred. Boron nitride filler appears lighter in color versus aluminum oxide filler. 3M™ Thermal Grease This range of high adhesion thin tapes offers efficient thermal transfer for a wide range of applications requiring a thermal management solution: bonding heat sinks, heat spreaders and other cooling devices to IC packages, power transistors, and other heat generating components. Each tape combines 3M high performance acrylic adhesive with highly conductive ceramic particles for an extremely reliable and user-friendly thermal interface. Highly conformable construction provides excellent wet-out on surfaces. 3M™ Thermally Conductive Grease The 3M™ Thermally Conductive Greases are high performance thermal interface materials for transferring thermal energy from a heat source (e.g. processor chip, graphics chip, High Power LED) to a heat sink. The proprietary blend of inorganic fillers contained in an organic matrix (non-silicone) ensures high thermal conductivity and low thermal resistance. Grease products are available in two versions: Standard viscosity and a lower viscosity version that can be useful in screen printing application methods. 3M™ Thermally Conductive Interface Materials Typical Applications Product 8805, 8810 8815, 8820 9882, 9885, 9890 9889FR 5516/5516S2, 5519, 5519S2 5591S2, 55921 55951 TC-2707, TC-2810 DP 190 Gray 5589H2, 5590H2 TCG-2035/TCG-2031* TCG-2037/TCG-2033* Typical Applications Thermally conductive adhesive transfer tapes with high mechanical strength, improved surface wet-out, and excellent shock performance. Applications include: heat sink attachment, flex circuit bonding, power device attachment and general thermal attachment solutions. 3M’s original thermally conductive adhesive transfer tape for applications requiring thin bonding with good thermal transfer. One millimeter thick, flame retardant acrylic soft tape for applications requiring gap filling and bonding with good thermal transfer, generally used for large surface area bonding. Thermally conductive interface pads (silicone) for applications requiring gap filling and superior thermal performance without bonding. Provides IC package and PCB thermal interfacing with heat sinks or other cooling device, and metal cases. Thermally conductive epoxies for applications requiring high adhesive strength, good surface wet-out, gap filling or thin bond lines with good thermal transfer. Thermally conductive interface pads use an acrylic elastomer for applications that require a non-silicone thermal pad. Thermally conductive greases provide a thin thermal interface to optimize thermal heat transfer between hot running devices and heat sinking surfaces. Excellent flow properties for improved interface wet-out. 3M Pads 5591, 5592 and 5595 are also available with a polyester film on one side to provide a non-tacky surface. 2 “S” designation signifies a polyester (PET) or a PEN film on one side to provide a non-tacky surface. “H” designation signifies a product with one non-tacky surface without the use of a PET film. 1 3M™ Thermally Conductive Adhesive Transfer Tapes 8805, 8810, 8815, 8820 High temperature adhesion with good dielectric strength. Applies quickly and easily using die-cut shapes. * 3M Greases TCG-2031 and TCG-2033 are supplied with a small wt% of a solvent added to lower viscosity. Lower viscosity can allow for reduced thickness during application and may benefit screen printing options. Effective thermal measurements are not significantly different from non-solvent added versions. Shear Rate viscosity reduced by 5-10x. Heat Sink 3M™ Thermally Conductive Adhesive Transfer Tape bonds a heat sink to a component and provides a thermal path for component cooling. Power Transistor Attachment 3M™ Thermally Conductive Adhesive Transfer Tape 8810 replaces silicone grease and screws for attaching transistors to heat sink. 2 05) 5 (0. Tapes are recognized for use with specific substrates and the tape/substrate is tested for a UL rating.3 9.6 0. *** TM-67X tapes are designed with a high/low adhesion construction.8 X 1011 3.38 0. somewhat larger surface areas as the thermal impedance is lower vs the 3M Tape 9889FR.9 0.7) 1. ** End use application testing will determine final temperature range based on final design and other environmental conditions.0) Ceramic 0.0 x1012 — Short Term (Hours-Days): 125-140°C Long Term (Weeks-Months): 80-100°C Filled Epoxy Various 2-part Epoxy/3M Duo-Pak. Short Term (Hours-Days): 125-150°C Long Term (Weeks-Months): 90-100°C 3M™ Thermally Conductive Adhesive Transfer Tape (TCATT): Standard Acrylic Thermal Tape 9882 9885 9890 Filled Acrylic Polymer 2 (0.4 0. Short Term (Hours-Days): 125-150°C Long Term (Weeks-Months): 90-100°C Short Term (Hours-Days): 90-125°C Long Term (Weeks-Months): 70-80°C 3M™ Thermally Conductive Acrylic Soft Tape (TCAST): Thick Acrylic Thermal Tape Filled Acrylic Polymer Silicone Release Paper 3.88 (5.105 (0.6 0.1) 0.13) 10 (0. an electrical bridge path via the aluminum fillers could occur between these surfaces. under certain end use application conditions.1) estimate 0. 3M Thermally Conductive Epoxy Adhesives TC-2810 uses ceramic filler and is suggested product to test for these types of application performance needs. Tapes are recognized for use with specific substrates and the tape/substrate is tested for a UL rating.4 x1011 7.7 5.17 (7.7 on Al Substrate 9889FR* 40 (1.89 (5.25) Silicone Ceramic Release Polyester 2.2 X 1011 3.6) 1.6) — — UL 94 V-2 Note: * 3M Tape 9889FR is a specialty tape used for very large panels or surfaces where a very conformable thermal tape is needed to achieve good wet-out/adhesion. If the metal fillers are “trapped” or “pinched” between two surfaces.1) 0.4* 2.51) 5.9 X 10 11 Thermal Performance Dielectric Properties Tapes UL Flammability Rating Potential Operating Temperature Range** (°C) 3M High Adhesion Thermally Conductive Adhesive Transfer Tape (TCATT): Softer-Improved Surface Conformability Acrylic Thermal Tape ™ 8805 8810 8815 8820 3.48 (3.0mil (50µm) bondline (KV/mm) D5470 TM) thickness Comments Potential Operating Temperature Range** (°C) 3M™ Thermally Conductive Epoxies DP-190 Gray TC-2707 TC-2810 Aluminum Silicate/ Carbon Black Aluminum Metal Ceramic* 0.1 .38) Dual Liners 20 (0. the effective resistivity and/or effective dielectric strength could be significantly lower than noted.25) Release Ceramic Polyester: 15 (0.3. Epoxy Adhesive TC-2707 is not suggested for applications where a powered electrical circuit is used or where a reliable volume resistivity and/or dielectric strength is desired. The 3M Tape 8820 is the suggested standard TCATT Thermal tape for most typical.8 8.7) 29 9890 tested 2 X 1014 UL Testing Note: Adhesive tapes are not intended to be used independently as a single component.7) 26 8815 tested 5. Dwell Strength Resistivity Type 3M ASTM (°C-cm2/W) (KV/mm) mil (mm) (ohm/cm) Type at RT D5470 TM) (N/cm) 5 (0.1 3 2.0-1. Face side or non-liner side when product roll is unwound is the lower adhesion side.67) 0. 2) As the 3M™ Thermally Conductive Epoxy Adhesive TC-2707 uses aluminum metal fillers.49 (3. 0.72 1.6 x1011 See note 2 See note 1 * Notes: 1) Thermal Conductivity (TC) can vary in an application as the filler is a Boron Nitride (BN) platelette shape and alignment of fillers can change effective TC.05 (0.8 X 1011 UL Testing Note: Adhesive tapes are not intended to be used independently as a single component. Suggested Temperature range is based on a UL-746 Test Method or a 3M Test Method.32 (2.13) Filled Acrylic Polymer Silicone10 (0. 3 .3M Thermally Conductive Adhesive Transfer Tape Selection Guide ™ Description Product Adhesion Peel Conductivity Base Product Strength @ Impedance Dielectric Volume Filler (W/m-K °C-in2/W Material Thickness Liner Type 72 hr.32) 32.50 (9.32 (2.2) 0.4 (15. Suggested Temperature range is based on a UL-746 Test Method or a 3M Test Method. ** End use application testing will determine final temperature range based on final design and other environmental conditions. 3M™ Thermally Conductive Epoxies Selection Guide Description Product Base Material Type Product Thickness mil (mm) Thermal Performance Packaging Dielectric Properties Volume Resistivity (ohm/cm) Filler Type Impedance Conductivity Dielectric °C-in2/W (W/m-K (°C-cm2/W) Strength 3M ASTM 2.8 11.5 2. 0) 60 (1. 2) 3M Pad 5592S is available in the 0. 2) 3M Pad 5591S is available in the 0.2) 0.4) 2.0 X 1012 3M V1 or V0 TM** Short Term (Hours-Days): 150°C Long Term (Weeks-Months): 100-125°C 3) Optional thicknesses > 2. 5519 5519S* Soft Pad Filled Silicone Polymer 20 (0.1 6.0) 60(1.1) 16 2.5) 40 (1.0) 0.3) 1. while Dielectric Strength is improved. Effective thermal measurements are not significantly different from non-solvent added versions.46 (3.82 (5.0) 60(1.0 0.3) Adhesion/Shore 00 Softness Thermal Performance Dielectric Properties Potential Operating Temperature Range*** (°C) 3M™ Thermally Conductive Interface Pads 5516 5516S* Soft Pad Filled Silicone Polymer 20(0.7 3.0) Ceramic PET No Added adhesive layer. Shear Rate viscosity reduced by 5-10x.0mm are available.0) Ceramic PET Soft Pad conformable /// Asker Polymer 60(1.0-2. 2) Optional thicknesses >2.0 X 1012 3M V1 or VO TM** Short Term (Hours-Days): 150°C Long Term (Weeks-Months): 100-125°C * 3M Pad 5591S has a polymeric permanent film on one side to be used as a nontacky surface for ease of reworking an assembly.9 x1014 3M V1 or V0 TM** Short Term (Hours-Days): 150°C Long Term (Weeks-Months): 100-125°C * 3M Pad 5516S is Thermal Pad 5516 with a polymeric permanent film on one side to be used as a non-tacky surface for ease of reworking an assembly.53 (3.92 (12.21 (7.0) Ceramic PET No added adhesive layer. Suggested Temperature range is based on a UL-746 Test Method or a 3M Test Method.7 0.1 1.05mm) Rate Potential Operating Temperature Range** (°C) 3M™ Thermally Conductive Grease TCG-2035/ TCG-2031* TCG-2037/ TCG-2033* NonSilicone Polymeric Binder Various Ceramic Ceramic & Metallic 2100/150* 340/36* 4.8) 21 3.0mm thickness.5) 40(1.0mm are available. * 3M Pad 5592S is Thermal Pad 5592 with a 12 µm polymeric permanent film on one side to be used as a non-tacky surface for ease of reworking and assembly.1 x107 See note 1 See note 1 Short Term (Hours-Days): 125-150°C Long Term (Weeks-Months): 100-125°C * 3M Greases TCG-2031 and TCG-2033 are supplied with a small wt% of a solvent added to lower viscosity.5) 7. Pad is tacky and conformable /// Shore 00=73 0. Pad is tacky and conformable /// Shore 00=80 4. Call 3M for details.0mm thickness. 5592 5592S* Soft Pad Filled Silicone Polymer 20 (0.0 X 1012 3M V1 or V0 TM** Short Term (Hours-Days): 150°C Long Term (Weeks-Months): 100-125°C 3) Optional thicknesses > 2. Thermal Conductivity and Thermal Impedance are slightly changed with addition of the film. 2) 3M Pad 5595S is available in the 0. Call 3M for details.0 0.0) 2. Thermal Conductivity and Thermal Impedance are slightly changed with addition of the film.9 x1014 3M V1/V0 or VO TM** Short Term (Hours-Days): 150°C Long Term (Weeks-Months): 100-125°C * 3M Pad 5519S is Thermal Pad 5519 with a polymeric permanent film on one side to be used as a non-tacky surface for ease of reworking an assembly.1) 0.3) 3.0 1.5) 80 (2.5) Ceramic PET 2.109) 4. 3M™ Thermally Conductive Interface Pads (Acrylic Elastomer) No added adhesive layer.7 X 1012 UL VO *3M Pad 5590H has a very low tack surface and a medium tack surface. ** End use application testing will determine final temperature range based on final design and other environmental conditions.3M Thermally Conductive Interface Pads Selection Guide ™ Tapes Description Product Base Product Filler Material Thickness Type mil (mm) Type Adhesion Conductivity Dielectric UL Volume Impedance**** Liner Characterization /// (W/m-K Strength Resistivity Flammability °C-in2/W Type Shore 00 Testing based 3M ASTM KV/mm (Film 2 (°C-cm /W) (ohm/cm) Rating version tested) on TM 6mm Thickness D5470 TM) No added adhesive layer.5mm -2.5) 40 (1. 5595 5595S* Soft Pad Filled Silicone Polymer 20 (0.29 (1.0) Ceramic PET 3.5mm thick products in the “S” version.5) 80 (2. while Dielectric strength is improved. Pad is tacky and conformable /// Shore 00= 50-60 1.76 (4.98 (6.4 X 1012 UL VO Short Term (Hours-Days): 110°C Long Term (Weeks-Months): 80°C Short Term (Hours-Days): 110°C Long Term (Weeks-Months): 80°C 3.081) 0. ** 3M V1 or V0 TM Notes: 1) Test results based on 3M UL Test Method. * 3M Pad 5595S is Thermal Pad 5595 with a polymeric permanent film on one side to be used as a non-tacky surface for ease of reworking an assembly. Pad is tacky and conformable /// Asker C=16 * 3M Pad 5589H has a very low tack surface and a medium tack surface.5) 80 (2.0) 60 (1. while Dielectric Strength is improved. 3M Pad 5595 1.14 (7. 4 .0) Ceramic PET No added adhesive layer. Filled 20(0.5) C=30 5589H* Soft Pad Filled Acrylic Polymer 40(1.0 1. while Dielectric strength is improved.95 (6.5) 1.9) 0.33 (8. No added adhesive layer.5mm -2.22 (14.15 (7.66 (10.70 (4.0) Ceramic PET No added adhesive layer.3) 15.0127 (0. Thermal Conductivity and Thermal Impedance are slightly changed with addition of the film.48 (3. Call 3M for details.71 (17.36 x109 4. Call 3M for details.0mm are available.4) 1.70 (4.0mm thickness.0170 (0.67 (10.0mm are available.5) 5590H* Pad is tacky and Acrylic 40(1.7) 2. Filled 5591S* Silicone Ultra Soft Polymer Pad 20 (0. Call 3M for details. Thermal Conductivity and Thermal Impedance are slightly changed with addition of the film.0) 0.1 0.43 (15.0mm thickness.8) 1.7 5.0mm thickness.9 2.49 (22. 2) The 3M V1 TM testing applies to the 0.1 3.5) 80(2.5) 3.5) 40 (1. 3) Optional thicknesses > 2. Pad is tacky and conformable /// Shore 00=40-50 1.0) 60 (1. 3M™ Thermally Conductive Grease Selection Guide Description Product Base Material Type Thermal Performance Dielectric Properties Volume Resistivity Comments (ohm/cm) Steady Impedance Conductivity State Shear °C-in2/W Product Dielectric (W/m-K (°C-cm2/W) @ Bond Thickness Filler Type Viscosity @ Strength 3M ASTM Line thickness of <2mil (KV/mm) mil (mm) 1.4) 0.9) 0.6 0. ***End use application testing will determine final temperature range based on final design and other environmental conditions.1 6.0 Shear/ D5470 TM) (0.5) 40 (1. Suggested Temperature range is based on a UL-746 Test Method or a 3M Test Method.0mm are available. Lower viscosity can allow for reduced thickness during application and may benefit screen printing options.64 (4.0-2.5) 80 (2.5) 0.1 0. 2) Optional thicknesses >2.7) 14. 3M Pad 5592 1.6) 1. 5591.31 (2.65 (4. Pad is tacky and conformable /// Shore 00=10-15 1.1 3. **** Thermal impedance is measured with the test sample under a nominal 10psi pressure to reflect a typical end use application.71 (11.0) 60 (1.1) 1.5mm -2. Z-Axis conductive films. 5-10 secs 302 – 338 (140 – 170). For connecting/bonding/grounding 59 – 158 flex circuits. EMI/RFI shields & gaskets. 7-15 secs 284 – 320 (140 – 160).ACF Interconnect Solutions Tapes 3M Anisotropic Conductive Film (ACF) Adhesives ™ Heat-bondable. (15 – 70). For connecting flex circuits to polyester-based devices (plastic touch screen. 10-16 secs 320 – 356 (160 – 180) 5-9 secs 284 – 320 (140 – 160). For connecting flex circuits to printed circuit boards. consisting of thermoplastic and thermoset adhesives randomly loaded with conductive particles. reworkable. PSA attachments at room temp. 9705 50 1000 PCB Grounding Plane Bonding FIlm 3M™ Grounded Heat Sink Bonding Film 7373 is an anisotropic electrically-conductive thermoset adhesive film. 7303 74 500 7313 63 500 7371 25 200 7378 40 200 7376-10 40 Au/Ni/Polymer 200 7376-20 35 Au/Ni/Polymer 500 For assembly of flexible printed circuit to camera module devices. plastic LCD. Excellent high temperature reliability. printed circuit boards. Adhesive Product Thickness (µ) 5363 40 Particle Type Gold-Plated Nickel Silver-Coated Glass Silver-Coated Glass Gold-Plated Nickel w/ Polymer Core Gold-Nickel Minimum Bonding Pitch Conditions (µ) °F (°C) 200 356 – 392 (180 – 200). Not recommended for extreme high or low temps. Fast bond time. ideal for bonding and grounding high frequency printed circuit boards.0 mΩ. Excellent resistance to low temps and solvents. 10-15 secs 275 – 302 (135 – 150). such as cellular base station amplifiers to heat sinks and heat spreaders. compatible with automated processes. 20-30 secs 275 – 302 (135 – 150). flexible printed circuit to polyester-based devices or flexible printed circuit to another flexible printed circuit. Eliminates the need for mechanical fasteners! Product 7373 Adhesive Type Epoxy/acrylate Contact Resistance 1. For connecting silver ink on polyester or copper on polyimide flex-to-PCB and flex-to-flex. Bonds at low temperatures.). For connecting silver ink on polyester or copper on polyimide flex-to-PCB and flex-to-flex. PSA Good adhesion. Standard outgassing. Stored at room temperature. the 3M ACF 5000 and 7000 series are heat bonded. 7-15 secs Applications/Notes For connecting copper on polyimide flex to PCB and flex-to-flex. 7-15 secs 284 – 320 (140 – 160). PSA (15 – 70).5°C-in2/W 5 . The 3M™ ACF 9000 series is a group of pressure sensitive adhesives. etc. These particles allow interconnection of circuit lines through the adhesive thickness (the Z-Axis). For more precise bond lines. 7376-30 9703 45 50 Au/Ni/Polymer Silver-Coated Nickel Silver-Coated Nickel 500 1000 59 – 158 Low outgassing version of 9705. 3M Test Method Thermal Impedance 0. but are spaced far enough apart for the product to be electrically insulating along the plane of the adhesive. 0 < 2. 9713 & High adhesion. 645mm2 Overlap Contact 1 Hr RT Dwell.0 < 15. Thicker ECATT for gap filling.3 < 0. Contact Resistance (R ohms) between a Copper foil test panel and a 2nd Sheet of a Copper foil test panel using the 3M ECATT Contact Resistance (R ohms) between a Gold Flexible Test Strip and a Gold Pad PCB panel using the 3M ECATT 3M ECATT General Overview Comparative Reference Table Conductive Filler Type Z or XYZ Conductivity (Based on 3M Test Method) Thickness (µm) Pictorial Design Adhesive Type Features. 9712.5 < 0. available conductive material in an actual sample tested.5 < 1. etc. High and Low adhesion sides. but are not limited to: Contact area.2 < 0.2 < 0. lot of material-along with the normal variations found in a material within a mfg.0 < 0. “Bond Line Gap/Slit” EMI Shielding for High Frequency. 9709 9709S 9709SL 7810 7805 7850 7772 9712 9713 9719 9720 9723 9725 9732 9760 9764 150 XYZ Nickel/Cu 9780 200 XYZ Nickel/Cu Non-woven conductive scrim & Standard acrylic adhesive. High Adhesion version of the 9705 High Adhesion.2 < 0.2 < 10. Standard outgassing version of 9703.0 < 0.0 < 0. it is difficult to identify the “Optimum” ECATT product without testing the ECATT products in an end use assembly design.2 < 0. The ECATT Selection Process of “Good-Better-Best” ranks products as they might perform in a nominal application. Easier rework as greater Face Side to Back High / Low Adhesion Side adhesion delta.4 < 1.2 < 0.5 < 0. lot to a different mfg.2 < 0. Acrylic ECATT High and Low adhesion sides. Easier rework as greater Face Side to Back High / Low Adhesion Side adhesion delta. acrylic adhesive type. 6 . Normal variations in product performance from one mfg.2 < 0. Lower R non-woven conductive scrim vs. 3M ECATT / 3M 2-point 6mm2 overlap contact Resistance Test Method / area. Thinner scrim design & High adhesion.2 < 0. etc. Low contact R to SS Premium low liner release version of 9709S Thicker ECATT for gap filling.0 < 7. Area / 1 Hr RT Dwell. 9712 & Standard acrylic adhesive. Acrylic ECATT 9713.2 < 0. the end user should identify 2-4 ECATT products to test in an application to determine fitness for use.0 < 1.0 < 0. Acrylic ECATT High and Low adhesion sides. < 0.0 < 0. Lower R non-woven conductive scrim vs. The following technical information and data should be considered representative or typical and should not be used for specification purposes. < 0. Acrylic ECATT 9713. Low surface energy silicone adhesive.5 < 5.2 < 1. Easier rework and Double sided reworkable thicker version of the 9732. As each ECATT may employ different conductive particles. Medium Adhesion Lower R non-woven conductive scrim Acrylic ECATT vs. they will perform differently based on end use application and so the need for the end users own comparative testing. Higher Thermal Conductivity & Thicker ECATT for gap filling. Thinner scrim design & Medium Acrylic ECATT adhesion.8 9703 9705 9706 9707 9707 Product 50 50 50 50 50 50 50 150 150 150 66 125 89 100 35 60 50 100 50 Z Z Z XYZ XYZ XYZ XYZ XYZ XYZ XYZ XYZ XYZ XYZ XYZ XYZ XYZ XYZ XYZ XYZ Silver Silver Silver Silver Silver Silver Silver Nickel Silver Carbon Nickle & Alum DC Carbon Nickel/C Nickel/C Nickel/Cu Nickel/Cu Nickel/Cu Nickel/Cu Nickel/Cu Low Outgassing Acrylic ECATT Standard Acrylic ECATT High Adhesion Acrylic ECATT High Adhesion Acrylic ECATT Standard Acrylic ECATT Standard Acrylic ECATT Standard Acrylic ECATT High Adhesion Acrylic ECATT Standard Acrylic ECATT High Adhesion Acrylic ECATT Medium Adhesion Acrylic D/C Standard Acrylic ECATT Standard Acrylic ECATT Z.2 < 0. 9713. The “Copper to Copper” & “Gold Flex to PCB” testing also should be noted for the differences related to the “Contact area” difference in the Test Methods (645 mm2 vs.2 < 0. Testing conditions. Higher Silicone ECATT temperature resistance. Easier rework and Double sided reworkable thicker version of the 9732.2 < 0.5 < 2. See note 1.3 < 0. Low Outgassing Z-Axis.4 < 0.3 < 0.). High Adhesion Lower R non-woven conductive scrim vs. Medium Adhesion Lower R non-woven conductive scrim vs.2 < 10. Environmental aging. Exact test surface material type utilized. Testing of ECATT materials and the noted test substrates does not imply that the ECATT is suitable for an end use application of similar materials. See note 1.5 < 1.Axis. variations in adhesives.2 < 0. Double Coated Aluminum foil ECATT Basic Comparative Reference Table: Based on the suggested “ECATT Selection Process”.5 < 5. and Benefits Copper foil bonded to Gold flex bonded to a Copper Foil using the PCB gold test pad.3M EMI/EMC Solutions Tapes 3M Electrically Conductive Adhesive Transfer Tapes ™ 3M™ Electrically Conductive Adhesive Transfer Tapes are designed to help you save time in a variety of specialized electronics assembly operations – from attaching EMI shields and gaskets to grounding and bonding flexible circuits and PCBs – while improving the performance and reliability of your finished products. Lower R non-woven conductive scrim High Adhesion vs. variations in conductive filler materials and uniformity of conductive materials dispersed within a lot of material. 6 mm2) as this does impact the test results. “Bond Line Gap/Slit” EMI Shielding for High Frequency. Low contact R to SS Standard Adhesion. Test methods. scrim or non-woven. thickness variations.2 < 0. As each application is unique. Advantages.0 Note 1: Test & performance results will vary based on items such as. etc. lot (such as thickness. “Bond Line Gap/Slit” EMI Shielding for High Frequency Standard Adhesion. Assembly method. High / Low Adhesion Easier rework as greater Face Side to Back Double sided reworkable Side adhesion delta.5 < 0. Thicker scrim design & High adhesion. Easier rework version Acrylic ECATT of 9725. End user is responsible to determine if an ECATT and substrate combination is fit for use in their intended end use application.5 < 20. 8) Determine contact area for ECATT used for R and adhesion of surfaces. filler type. pressure-sensitive tape that can be hand or machine applied and die cut to virtually any shape! Tapes Contact Resistance (R ohms) between a Gold Flexible Test Strip and a SS panel using the 3M ECATT Bond Line EMI Potential to improve contact R Thermal Conductivity Shielding of a Flex to a PCB grounding locations Adhesion to Ease of Rework (W/mK) or an effective (Bond Line via improved surface conformability SS type based on a Thermal Resistance Gap/Slit EMI and XYZ conductive potential with substrate/3M standard set (C/W) for a given Shielding an ECATT product type vs. more compact fabric and layered foil shielding materials. an ECATT general selection process could take into consideration items such as. “Best” results Best = High dB relate to a lower contact R EMI Shielding potential on SS. 7) EMI Shielding in bond line “Gap/Slit” for high frequencies. Best Best Best Best Good Best Best Better Good Good Better Good Better Good Better Better Best Best Best Best Best Best Best Better Better Good Good Good Good Good Good Good Better Better Better 9703 9705 9706 9707 9709 9709S 9709SL 7810 7805 7850 7772 9712 9713 9719 9720 9723 9725 9732 9760 9764 9780 Product Contact R between a Flex and a PCB Peel Strength Good Good Good Best Best Best Best Good Good Good Good Good Good Good Good Better Better Better Better Good Good Best Best Good Good Good Best Best Best Good Better Good Better Good Best Better Best Good Better Better Good Good Better Better Better Good Better Good Good Good Good Good Good Good Good Good Best Good Good Good Best Best Best Best Better Better Best Good Good Good Good Good Good Good Good Good Better Better Good Good Best Good Better Better Good Good Best Good 3M™ Electrically Conductive Adhesive Transfer Tape (ECATT) Selection Process: Selection of Grounding. Contact R can in vary with SS type tested as the Bond Line oxide layer thickness on a SS “Gap/Slit” type affects the final R results.These long-lasting adhesive transfer tapes can eliminate the need for screws and mechanical fasteners – while allowing the use of lighter. 4) Bond line thickness. temperature and time limits 10) After assembly bond line stresses and need for added mechanical support. And. 2) Define contact surface type. and High/Low adhesion sided ECATT’s. 7 . 9) Assembly Pressure. unlike other electrically conductive adhesives that can be messy and difficult to handle. See note 1. but not limited to: 1) Determine contact R target. EMI Shielding and attachment ECATT’s consists of determining several application requirements: For example. Gold flex bonded to SS using the ECATT. 3M delivers advanced adhesive and conductive properties in an easy-to-use. 5) Z or XYZ conductive type ECATT. 6) Operating temperature range and environmental conditions. a generic TM/24hr RT dwell of substrates thickness vs a generic Potential) Z-axis only conductive PSA Z-Axis only PSA ECATT design Effective Thermal can effect rework resistance and Thermal based on acrylic Conductivity vs a adhesive type & generic Z-Axis only conductive PSA. 3) Adhesion level desired from High-Medium-Standard Adhesion. electricallyconductive adhesive tape laminated on both sides of the cushion gasket. Y. X. electricallyconductive adhesive tape laminated on the mesh fabric (liner) side of the cushion gasket. Self sticking.0 mm 3. Fabric electronic devices. including metal-plated substrates. Gasket series ECG-80XX are soft and conductive polymeric foam gaskets with a thin. These products offer conductivity through their thickness (Z-axis) and in the plane of the adhesive (X-Y planes).3M EMI/EMC Solutions Tapes Electrically Conductive Cushioning Gasket Choices 3M™ Electrically Conductive Cushioning Gasket ECG-7033. Gasket series ECG-70XX are soft and conductive polymeric foam gaskets with a thin.9W/m-K QTM-500 Adhesion Properties 180° Peel Adhesion (FS) 180° Peel Adhesion (BS) * ECG-70XX product slightly thinner than noted. They offer outstanding gap-filling performance while maintaining good electrical grounding potential.5 Kgf/25 mm 1. Z axis elecrically conductive acrylic pad Nickel-Filler 15.05 0. 0. Material and Typical Physical Properties Product Construction Product Numbers Tape Thickness (mm) Carrier Type Adhesive Type Filler Type 0.1 Ω <0. Double Coat Conductive PSA Release Liner Electrical Properties Z-axis Resistance1 (1 in × 1 in) Z-axis Resistance (10 mm × 10 mm) 2 Test Method <0. The adhesive used on 3M ECG products is a highperformance 3M™ Electrically Conductive Adhesive Transfer Tape (ECATT).2 Kgf/25 mm 3M TS-EMC-0002 3M TS-EMC-0002 3M Gaskets and Conductive Materials ™ Product Backing Total Adhesive Thickness mils (mm) Features Electrical Resistance (MΩ/ ) Adhesion to Steel (gf/in) 180 700~1 000 eCap 7830N Acrylic with 7. ECG-8075. 19. 11.35 ±0.7 Conductive/PET gasket provides shielding and grounding in Coated (0. ECG-7053.5) 100 8 .1 Ω/ 3. Z Acrylic X.55 ±0. They are ideal for EMI/EMC gasket tape applications between common substrates. ECG-7073.2. ECG-8055.05 Ω <0.3. Graphite 0.05 ECG-8035 ECG-8055 ECG-8075 Plated Polyurethane Foam Soft Acrylic PSA Nickel Particles PE Coated Paper Liner (PET film liner and dual liner version are available) ECG-7033* ECG-7053* ECG-7073* Plated Polyurethane Foam Soft Acrylic PSA Nickel Particles PE Coated Paper Liner (Light grey color 3M logo printed) 3M™ Electrically Conductive Cushioning Gasket ECG-8035.8. such as metal surfaces.75 ±0. 0.8. Y. See TDS for ECG-70XX 1.7.0 mm 3M TS-EMC-0001 3M TS-EMC-0001 3M TS-KOR-939 Surface Resistance Minimum Overlap Length Minimum Overlap Width Thermal Property Thermal Conductivity 0.4. Single Coat Conductive PSA 3M™ Electrically Conductive Cushioning Gaskets (ECG) are compressible tapes with good electrical conductivity and excellent cushioning/recovery properties.05 0. Available in Halogen Free version. Can be applied directly to 5 thicknesses noisy traces and IC's.5% * See datapage for test method 9 .3M EMI/EMC Solutions Tapes EMI Absorbers Product Backing Adhesive Total Thickness mils (mm) Features Thermal Electrical Magnetic resistance Permeability Conductivity (MΩ/ ) Ω/ @ 1MHz (W/m-K) Flexible AB5000 polyethylene Series sheet loaded with magnetic particles Flexible AB5000R polyethylene Series sheet loaded with magnetic particles Flexible AB5000S polyethylene Series sheet loaded with magnetic particles Flexible polyethylene AB6000 sheet loaded with Series magnetic particles laminated to Al foil Flexible AB7000 polyethylene Series sheet loaded with magnetic particles Acrylic Reduces and eliminates high .8 RFID tags to function on metal (0.4 to 40 frequency RF noise in electronic (.03 to . systems.105) Total 1.2 to 20 systems. Specifically designed to allow HF 0.02) surfaces Reduces and eliminates high .7 Acrylic N/A 1. a unique combination of properties.0 Acrylic Reduces and eliminates high frequency RF noise in electronic 1. LCD and CRT). Product 8880-S3 8880-S7 Thickness 3 mil (75µm) 7 mil (175µm) EMI Shielding* 20-30 dB 20-30 dB FIlm Surface Resistance* <20 ohms <20 ohms Transmission %* <87.13 (0. 8880-S7 ™ 3M™ Ultra Transparent EMI Shielding Film 8880 is a polyester film with an electrically conductive thin film specialty coating. Can be applied directly to 5 thicknesses noisy traces and IC's.7 Acrylic 1 x 10e9 35 to 100 0. Can be used when using a shielding can is impractical.7 3M Ultra Transparent EMI Shielding Film 8880-S3. Also good for allowing HF RFID tags to function on metal surfaces.5% <87.050) Absorber Combines absorbing and shielding functions into one convenient product. Available in Halogen Free version. This transparent conductive coating allows high transmission in the visible spectrum and provides EMI shielding in the radio and microwave frequency. Can be applied directly to (.03 to 1). systems.5) noisy traces and IC's.7 Acrylic 1 x 10e9 55 0. 4. Available in 5 thicknesses Halogen Free version.4 to 40 frequency RF noise in electronic (.97 (0.4 & 0. 1 x 10e9 30 0. 1 x 10e9 120 0.01 & 0. Applications include EMI shielding for display screens (PDP.03 to 1). Also can provide EMI shielding. Solderable and easily die cut. easily die cut.8) UL 510 UL 510 UL 510 For EMI shielding. grounding. static charge draining when grounded. grounding. resistance to oxidation.3M EMI/EMC Solutions Tapes Foil and Fabric Tapes Product Backing Total Adhesive Thickness mils (mm) Features Electrical Adhesion Product Resistance to Steel Certification (MΩ/ ) (oz/in (N/cm) 3M™ Aluminum Foil 300PL Economical EMI shielding aluminum foil tape.2 (0.8) — UL 510 UL 510 UL 510 3M™ EMC Products can provide EMI/RFI shielding and absorbing.5 (0.5 31 (3.066) static charge draining.5) 40 (4. Acrylic Non2.102) 3.0 (0.4) 46 (5.4) 35 (3. Solderable and easily die cut. For EMI shielding.061) resistance to oxidation. Easily die cut. static charge draining.6) — UL 510 — 3M™ Aluminum Foil Laminated with Polyester Film 1 mil aluminum Acrylic AL-36FR foil + polyester Conductive film Foil backing laminated with polyester film.8) 31 (3. 4. cushioning. static charge draining. Easily die cut. 10 35 (3. • Provide electromagnetic compatibility • Shield or absorb electromagnetic and radio frequency interference • Ground sensitive electronic components and boards • Cushion components • Protect cables • Provide conductive properties 1120 1170 AL-25BT AL-25DC AL-50BT 1115B 3. Foil backing laminated with polyester film. static charge draining.4 (0.6 (0. Conductive Acrylic Conductive Acrylic Conductive Acrylic Conductive Coated on Both Sides Acrylic Conductive 3.102) 5. N/A N/A 3 5 60 (6.9 (0.150) For EMI shielding.4) UL 510 AL-40BLK 50 31 (3. Easily die cut.4 mil copper foil 1.4 mil copper foil 1.2 (0. For EMI shielding.5 mil aluminum foil Acrylic Conductive Acrylic Conductive Acrylic Conductive Acrylic Conductive Coated on Both Sides Acrylic Conductive Acrylic Conductive 4. N/A 20 (2. both physically 3. 1. Easily die cut. solvents and oils. contact your 3M representative.9) 31 (3.5 (0.8) 35 (3. anti-static masking. grounding.3 (0. static charge draining. Good 1 mil aluminum Acrylic Non2. For EMI shielding.4) 36 (3.078) Excellent adhesion and environmental resistance.8 (0. grounding. solvents and oils.4) 31 (3.8) 40 (4. Solderable and easily die cut. For grounding and EMI shielding.102) 4. 2. mechanical protection and conductive properties for a wide variety of applications. 1182 Typically used to bond two surfaces. N/A 9 10 10 78 (8.0 (0. Easily die cut.1 (0.066) grounding. resistance to oxidation.5 mil thickness provides excellent shielding and structural support characteristics.8) 45 (4.081) 2.0 (0. Good electrical insulation. Oxidation resistant for long-term EMI shielding. Oxidation resistant for long-term EMI shielding.079) 6. Good for cable wrap.4) — UL 510 UL 510 UL 510 These solutions include an innovative line of 3M™ Electromagnetic Compatible Products that can control electromagnetic interference from internal sources. Easily AL-36NC foil + polyester Conductive die cut. 1 5 1 1 1 35 (3.4 mil copper foil 1.4) UL 510 3M™ Copper Foil 508SN 1125 1126 1181 1. solvents and oils.0 (0. 20 22 (2.8) UL 510 1183 1194 CU-35C 5 N/A 5 35 (3. grounding. grounding. Solderable and easily die cut.0) UL 510 UL 510 UL 510 UL 510 UL 510 10 *For information on the copper foil version of 300PL.4 mil copper foil 1.4) UL 510 Foil backing laminated with polyester film. Easily die cut. For EMI shielding. static charge draining.9) 35 (3. static charge draining. static charge draining. Matte 2.4 mil copper foil 1. static charge draining. static charge draining.102) 5. grounding. limit EMI susceptibility from external sources and help manufacturers meet high certification standards around the world.127) 4. Glossy 2. aluminum foil* Conductive 2 mil aluminum foil 2 mil aluminum foil 1 mil aluminum foil 1 mil aluminum foil 2 mil aluminum foil 4. static charge draining. grounding and static dissipation.07) For grounding and EMI shielding.0 (0. grounding.084) 3. For EMI shielding. static charge draining. solvents and oils.4 mil tin-plated copper foil 1.066) For EMI shielding. Good 2.6 (0.061) For EMI shielding. Easily die cut.4 (0. Conductive Acrylic Conductive 2.0 (0.9) 35 (3.089) and electrically.8 (0. For EMI shielding. grounding.6 (0. For EMI shielding.2) — 50 31 (3. Easily die cut. film AL-37BLK 1 mil aluminum Acrylic foil + black Conductive matte polyester film 1 mil aluminum Acrylic foil + black Conductive glossy polyester film Foil backing laminated with polyester film.152) 35 10 6. Acrylic Non3. Easily die cut.071) surface finish. Solderable. Solderable and easily die cut.089) 2. For EMI shielding.080) applications.4) 52 (5. grounding.2 (0. 3M™ Embossed Foil 1245 1267 1345 2245 3245 Embossed copper foil Embossed aluminum foil Embossed tin-plated copper foil Embossed copper foil Reverse embossed copper foil Acrylic NonConductive Acrylic NonConductive Acrylic NonConductive Acrylic Conductive Acrylic Conductive 4.8 (0. grounding. Easily die cut.4 mil copper foil 1.5 ) 36 (3. Easily die cut. Good electrical insulation. static charge grounding.5 (0. Conductive For EMI shielding on a wide range of applications.9 mil Acrylic Non3.4 mil copper foil Economical EMI shielding on a wide range of Acrylic Non3. Easily die cut. . grounding. static charge draining.071) surface finish.0 (0.089) Easily die cut. Solderable and easily die cut. Easily die cut.055) resistance to oxidation. Lightweight.4) 31 (3. Easily die cut.06) Lightweight. Thin.3 (0.8 (0. Soft magnetic sheet sandwiched between layers of film. oxidation resistant and high strength for EMI shielding and grounding. oxidation resistant and high strength for EMI shielding and grounding. flexible and easily die cut. conformable. Lightweight. Lightweight.7 (0.4) — — X-7001 15 59 (6. both physically and electrically. Softened copper foil with flame-retardant film on both sides.8 (0.05) 5 40 3M™ Mesh and Sleeving Braided glass DS & FS fibers overwound Series with tin-plated copper foil Sleeves braided with polyester fibers and VA Series polyester fibers over-wound with tin-plated copper foil None N/A EMI mesh sleeves for cables and harnesses. Double coated with adhesive. conductive. Lightweight.3M EMI/EMC Solutions Tapes Foil and Fabric Tapes Product Backing Total Adhesive Thickness mils (mm) Features Electrical Adhesion Product Resistance to Steel Certification (m ohms) (oz/in (N/cm) 3M™ Metallized Cloth 2191FR Nickel on copperAcrylic plated polyester Conductive ripstop fabric Silver-coated polyester fabric Gold-coated polyester fabric Copper-plated polyester ripstop fabric Acrylic Conductive Acrylic Conductive Acrylic Conductive Coated on Both Sides 5.110) 4. oxidation resistant and high strength for EMI shielding and grounding.110) 2.5 (0. and static dissipation. grounding. flexible.170) N/A None UL 94 VO CU-1010S Copper foil+ double epoxy film None 11.1) UL 510 AG-0927 AU-2190 5 5 31 (3. Lightweight. conformable non-woven fabric. None N/A EMI mesh sleeves for cables and harnesses.300) Excellent high-µ magnetic shielding at low frequency.3 (0. Excellent strain relief and heat stability.351) N/A N/A UL 510 Double epoxy AL-1010S FR film + aluminum foil Epoxy FR film + copper foil None N/A N/A UL 510 CU-10S None 6. conformable.110) 4. Easily die cut. Lightweight. conformable non-woven fabric.8) — 5 30 CN4490 2. Easily die cut. flexible. Typically used to bond two surfaces. N/A N/A UL VW-1 (UL FR-1) 3M offers a wide range of EMI/RFI shielding tapes and absorbing materials.3 (0. flexible and easily die cut. grounding. Softened aluminum foil with flame-retardant film on one side. oxidation resistant. Also can provide EMI shielding. lightweight. and static dissipation. flexible and easily die cut. conformable. flexible and easily die cut. Lightweight. Softened copper foil with flame-retardant film on one side. Excellent strain relief and heat stability. oxidation resistant. 3 19 (2.140) 4. Softened aluminum foil with flame-retardant film on both sides. Easily die cut. conformable and easily die cut. grounding. N/A N/A — AL-10S None 7. static charge draining. Excellent EMI shielding for PCBs and assemblies.3 (0. N/A N/A — 3M™ EMI Shielding Sheets and Films 1380 High-metal magnetic sheet between polymer film layers Epoxy FR film + aluminum foil Rubber Thermosetting 11. Lightweight.4) — Nickel on copperAcrylic CN 3190 plated polyester Conductive ripstop fabric CN3490 Non-woven copper-nickel fabric Non-woven copper-nickel fabric Acrylic Conductive Double Coated Acrylic Conductive 1 35 (3. gaskets and conductive materials. Excellent EMI shielding for PCBs and assemblies. lightweight and easily die cut. Easily die cut. Ideal for shielding. Ideal for use as a thin. Ideal for shielding. conformable. flexible. repositionable gasket material. Lightweight.8 (0. Excellent EMI shielding for PCBs and assemblies. Excellent EMI shielding for PCBs and assemblies. thin.300) N/A None — 11 . thin.8 (0.4 (. Lightweight. mesh and sleeving products. Solderable. oxidation resistant and high strength for EMI shielding and grounding.198) 13. Solderable.110) 4.0 (. for neat manual or automated application Product Base Number Resin 406 583 588 615 615R 615S 668 AF-42 AF-111 EAA Nitrile Phenolic Nitrile Phenolic Polyester Polyester Polyester Polyester Color • Bonds in seconds with heat to help eliminate fixturing.9 (0. light-coloredof substrates. and utilize a non-silicone coated liner specially designed for static cling vinyl.3 (0. Percent Shear Strength mils Time °F (°C) Elongation Strength piw 3. Range °F (°C) Comments 0. uniform film thicknesses allow consistent bond lines • Available in precise die-cut shapes and sizes. FVS14S is recommended where high clarity of the product is critical. ** Value measured as a cohesive bond strength in units.0 2-5 sec 320 (160) 2-5 sec 250 (121) 2-5 sec 250 (121) 750 800 250 300 300 300 1000 250 10 Clear Brown Yellow Tan Tan Tan Tan Flexible. that adhere to most clean. *up to 160 (71) Medium tack protective tape.0 None *Dependent on dwell time. smooth surfaces such as glass. lbs/in. such as LCD displays. Epoxy Translucent Epoxy Off-White 3M Protective Tapes ™ 3M™ Protective Tapes are designed to provide short-term protection for critical surfaces. film has good adhesion to a variety 15 on Al Scrim version of 615 2.5 Clear Polyester Liner 3.05) 2 (0. polyolefins and liquid crystal polymers to temperature sensitive materials and metals.040) 0. Choice of bond strengths ranges from temporary to permanent. light-colored thermoplastic bonding film 1090 on Al 16. Contact 3M Polymask tech services for details at 1-800-241-2031. FVS14S/ Clear Static Cling Vinyl 7. Product/Color ASTM Test Method 335/Pink 336/Transparent 1614/Clear 2A12/Clear 2A26/Clear 2A89/Clear 3130/Clear Polyester Film/Rubber Polyester Film/Rubber Polyester/Acrylic Co-Extruded Acrylic Co-Extruded Acrylic Co-Extruded Acrylic Polyethylene/Rubber Adhesion Tensile Elongation Tape Backing Total Strength at Break Structure Thickness Thickness to Steel oz. high-gloss coated metals and glass. Features and benefits: • Precise.4 (0. packaging and shipping. Backing/Adhesive mils (mm) mils (mm) (N/100mm) (N/100 mm) % D-3652 D-3652 D-3300 2 (2) 1 (1) 2 (2) 4 (4) 9 (10) 15 (16) **14 (15) D-3759 24 (420) 24 (420) 24 (420) 7 (123) 7 (123) 7 (123) 6 (105) D-3759 125 90 88 600 600 600 450 -60 – 150 (-50 – 66) -60 – 150 (-50 – 66) *up to 300 (150) Low tack protective tape.02) 1.9 (0. against scratches and marring during manufacturing.6 on SS exhibits good adhesion to a variety of substrates.0 10. Liner for 3M label product FVS14S has a non-silicone coated liner specially designed for static cling vinyl and is used when high strength and caliper control are important. providing excellent performance on a variety of substrates ranging from fabrics. Excellent heat resistance and structural bond strength.08) *up to 160 (71) Low tack protective tape.05) 2 (0. painted metal. *up to 130 (54) No tack– bonds to itself Tape Liner Product/ Tape Color Structure Thickness Liner Thickness Adhesive mils mils ™ Key Characteristics 3M Static Cling Label Materials are highly-plasticized vinyl label materials. especially metals.036) n/a n/a n/a n/a n/a 1. high temperature tape for smooth surfaces.02) 1. Speeds assembly. light-colored thermoplastic substrates. light-colored thermoplastic film is tacky at 1000 on Al 14 on Al room temperature and has good adhesion to a variety of substrates at elevated temperatures.0 3. 4600 5300 55 38 Excellent heat resistance and structural bond strength. *up to 160 (71) High tack protective tape.05) 3 (0. Bonding film adheres stainless steel lids to the connectors and plastic frames. exhibit good adhesion to a variety of thermoplastic 15 on Al Flexible. 630 on Al 880 on Al 810 on Al 810 on Al 810 on Al 10 on Al Heat or solvent-activated dry film adhesive 20 on Al Heat-activated dry film adhesive bonding films 15 on Al Flexible. Low tack.0 2-5 sec 280(138) 6. Overlap 180° Peel Cure Temp.5 & 4. • Provides a dielectric insulating layer • Choice of overlap shear strength on aluminum as high as 2500 psi Description Caliper Bond/ Bondline Approx. Low tack protective tape. 3M™ Bonding Films combine some of the best features of 3M film and hot melt adhesive technologies. and most smooth plastics without the use of pressure sensitive adhesives./in.0 6&9 4.3M Bonding Films ™ Tapes Personal Computer Memory Cards – 3M™ Bonding Films provide a bond stronger than high strength pressure sensitive tapes.03) 2 (0.0 2. 12 .0 2-5 sec 280(138) 2-5 sec 280 (138) 2-5 sec 320 (160) 60 min 350 (177) 60 min 250 (121) Flexible. available in white or clear. Temp.0 6.6 (0. 21) 41 (45) 46 (50) 30 (525) 26 (455) 9 10 Up to 350 (177) High temperature. 13 .5 (0.2 (116) 33 (578) 33 (578) 30 (525) 33 (578) 60 98 60 60 60 60 -100 – 500 (-73 – 260) 0 – 500 (-18 – 260) -100 – 500 (-73 – 260) -100 – 500 (-73 – 260) -100 – 500 (-73 – 260) Up to 500 (260) High temperature film. Take a look at the selection guide below to choose the high temperature tape that will work for you.7 (0. % D-3759 Temp. High temperature performance.06) 1.6 (0. Low static wave solder. Silicone plating. Electroplating. Polyimide/ Silicone PVA/ Synthetic Polyimide/ Silicone Polyimide/ Silicone Polyimide/ Silicone Polyimide/ Acrylic 2.07) 2. Silicone plating.5 (0.18) 29 (27) 31 (34) 20 (22) 27 (476) 30 (525) 18 (315) 124 135 245 40 – 170 (4 – 77) 40 – 170 (4 – 77) 40 – 170 (4 – 77) Performance.07) 2.046) 20 (22) 7 (8) 20 (22) 20 (22) 25 (27) — 33 (578) 6.09) 7. Water soluble.5 (0. 3M™ High Temperature Tapes Polyimide 5413/Amber Water Soluble 5414/Transparent Low Static Polyimide 5419/Amber Low Static Polyimide 5433/Amber General Purpose Polyimide 7413/7413L /Amber* Low Static.7 (0.8 (.07) 2./in.13) 14 (15) 17 (297) 150 3M™ Circuit Board Fabrication Tapes Circuit Plating Tape 851/Green Circuit Plating Tape 1280/Red General Purpose Vinyl 4731/ Purple Polyester/ S/R Blend Polyester/ S/R Blend Vinyl/Rubber 3. Non-Silicone Polyimide 7419 *Only available in log roll. mils (mm) D-3652 D-3300 (N/100mm) (N/100 mm) D-3759 Tensile Strength Elongation at Break lbs/in. Non silicone.6 (0.3M High Temperature Tapes ™ Tapes 3M™ High Temperature Tapes provide masking protection for a variety of applications and can withstand temperature ranges from -100°F (38°C) up to 500°F (260°C). Up to 325 (163) High temperature Up to 1 hour performance. Up to 325 (163) Very aggressive holding for 30 min for multibake paint cycles. Fine Line 4737T 5.5 (0.7 (0.0 (0. Product\Color ASTM Test Method Backing/Adhesive Tape Structure Adhesion Total Thickness to Steel oz. Flame retardant and weather resistant.06) 2.09) 3. Up to 1 hour Cost effective.16) 8. good for 30 min on anodized aluminum. Scotch® High Temperature Vinyl Masking Tapes Fine Line 4737S Opaque Blue Vinyl Film/ Rubber Translucent Blue Vinyl Film/ Rubber 5. Range °F (°C) Comments Scotch® High Performance Masking Tape High Performance Tape 213 High Performance Masking 2693 Crepe Paper/ Rubber Mini-Crepe Paper/Synthetic 6. Performance.13) 14 (15) 14 (245) 150 Up to 325 (163) High temperature.1 (0. Linered 5419 tape.1 (0. low static. 14 . 827x. dirt and gels Film on Film on Plastics PET ITO PET OCA-2 ITO Resistance Change (%) PET PMMA/PC Display Module 40 30 20 10 0 -10 Competitor OCA 8171 8146 ITO Film Control 8262 8272 OCA-1: Good adhesion & ink wetting – 8142KCL. good adhesion. 3M OCAs are easy to convert and are contaminant-free. 8142A OCA-2: Outgassing resistant & good adhesion – 817×. Common applications include displays. 8142A OCA-2: Bare ITO compatible. reworkable/removable Cross Section View PET OCA PET ITO Trace Connector Pad • Expose samples to 60°C/90%RH and monitor resistance across 5 lines. Electronic Paper PET Film Electronic Paper Module 3M™ Optically Clear Adhesive OCA (Optically Clear Adhesive) is used in non-gap filling applications. 826× Capacitive Touch Examples Glass Touch Glass ITO OCA-2 Glass OCA-3 Display Module 5 10 15 Days @ 60°C/90% RH 20 25 Note: Samples with <20% resistance change in 3 weeks are considered a pass.47 refractive index • Designed and manufactured to eliminate common adhesive visual defects including bubbles.3M Optically Clear Adhesive ™ Tapes Touch Screen Applications Resistive Touch Examples Film on Glass Hard Coat ITO PET PET Glass Display Module OCA-1 3M™ Optically Clear Adhesives (OCA) are highly specialized optically clear free-film adhesives offering superior clarity and excellent adhesion to various types of transparent substrates. OCA – “Bare” ITO Compatibility Test Top View • Laminate OCA between 1. Average readings. good ITO/Ag trace wetting – 814xKCL.5 mil polyester backing and ITO patterned polyester (3M test pattern). touch panels and others requiring an optically clear bond. Hard Coat Film Touch PET OCA-1 PET OCA-2 PET OCA-3 Display Module ITO OCA-1: Good adhesion and ink wetting – 8142KCL. 826x OCA-3: Mura free. resulting in improved resistance to bubbling and delamination in laminates exposed to high temperature and high humidity. Optical Characteristics • 99% light transmission • <1% haze level • Birefringence-free Bare ITO Compatibility 50 OCA-1 • 1. Available with 75 µm clear release liner for easy inspection.3M Optically Clear Adhesive ™ Tapes Product Highlights • Environmental stability under high temperature and high humidity • Excellent choice for high outgassing plastic substrates (e. General purpose. for bonding film and glass laminates • Transparent graphic overlays 3M™ Optically Clear Adhesive Adhesive Peel Adhesion to Product Thickness Glass Number mil (µm) oz/in (N/100mm) 8171CL 8172CL 8173D** 8172P 8211 8212 8213 8214 8271 8271S* 8272 8273 8273D** 8274 8261 8262 8263 8264 8141A 8142A 8141KCL 8142KCL 8143KCL 8146-1 8146-2 8146-3 8146-4 1 (25) 2 (50) 3 (75) 4 (100) 44 (48) 54 (59) 60 (66) 65 (71) 2 (50) 39 (43) 1 (25) 2 (50) 3 (75) 2 (50) 1 (25) 2 (50) 3 (75) 4 (100) 1 (25) 2 (50) 2 (50) 3 (75) 3 (75) 4 (100) 1 (25) 2 (50) 3 (75) 4 (100) 1 (25) 2 (50) 42 (46) 45 (49) 41 (45) 54 (59) 54 (59) 65 (71) 69 (75) 67 (73) 47 (51) 46 (50) 57 (62) 67 (73) 60 (66) 80 (88) 66 (72) 70 (77) 80 (88) 87 (95) 22 (24) 39 (43) • Projection screens • Avionics/military displays • Optical management films for LCD Samples were laminated according to above configuration and exposed to 60°C/90%RH and 85°C. PMMA (MR200.3" (1380 mm) for Products 817× Series and 60" (1524 mm) for others Outgassing Test PMMA/PC OCA Glass Recommended Applications • Touch screens. Soft for easy lamination and ink step wettability With 75 µm clear release liner for easy inspection. PC. PMMA. Polycarbonates (PC) and Acrylics (PMMA) inherently retain moisture. Made to order. creating bubbles. Available with /75 µm clear release liner for easy inspection. delaminations and other visual defects. PC) • Solves “air bubble” problem on plastic surface application • Bare ITO compatible • Available in widths up to 54. PMMA substrates. Outgassing resistant. Fail: Appearance of bubbles. Made to order. Made to order. High adhesion to glass. Substrate Configuration Product Made to order. and other visual defects. PET. Same as above. Comments Available with 50µm clear release liner for easy inspection Made to order. 8172CL Pass 1 mm)/Glass Bare ITO compatible. MR58 is a polycarbonate from Mitsubishi Gas Chemical (MGC) MR200 is a PMMA from Mitsubishi Rayon Pass: No physical changes after outgassing test. When exposed to high temperature/humidity they outgas. Available with 50 µm clear release liner for easy inspection Special order. Available with 75 µm clear release liner for easy inspection. Bare ITO compatible. Made to order. 8262 1 mm)/Glass PC (MR58.g. Bare ITO compatible. Good for lamination to PET. UV blocking OCA for outdoor applications. Samples were visually inspected for bubbles. Available with 75 µm clear release liner for easy inspection. PMMA (MR200. 1 mm)/Glass 8262 Made to order. *S=Single coated OCA **D=Double coated OCA Ask 3M about other OCA products for touch circuit manufacturing: • OCAs in different thicknesses • OCAs with higher refractive index • Cleanly removable self wetting OCAs • Direct OCA coating service on your substrates • UV blocking OCA 15 . Special order. Available with 75 µm clear release liner for easy inspection. Special order. Available with 50 µm clear release liner for easy inspection. PET. good for lamination to glass. Soft for easy lamination and ink step wettability. glass. Delamination is another type of failure mode. Provides UV protection yet does not alter visible range transmission. Bare ITO compatible Made to order. Special order. Results after 3 days 60°C/ 85°C 90%RH Pass Pass Pass Pass Pass Pass Typical Applications Outgassing resistant PC/PMMA substrate. 8172CL Pass 1 mm)/Glass PC (MR58. Bare ITO compatible. 0 0. you’ll want to evaluate the many pressure sensitive adhesive bonding tapes from 3M. 300. Then find adhesive and liner details in the chart below.0 0.0 83# Polycoated Kraft 6. 350 and 400 adhesive families * Cannot be used in double-coated construction ** 1.0 mils 1. liners. 2.2 mils 58# Polycoated Kraft 4. It’s what R3 is all about – finding the right solution for you.0-10. Please refer to the R3 brochure (70-0711-1147-3) for additional information.5 1. and we’ll help you find solutions for any one of thousands of material combinations. Responsive.0. 7. 2.0-10. * Rolls more than 10" wide require 14 days Enhanced appearance. 3.0 2.5 mil minimum for double-coated construction † Low fogging for automotive applications 16 .0.0 2. If you don’t see what you want.0. thickness.5 Polyester 2.0 0. right away.0 0. 3. 5.0.Tapes Electronic Thin Attachment Films 3M Adhesive Transfer and Double-Coated Tapes ™ NOTE: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.0. 1. R3 Product Matrix Use the table below to check for compatibility with adhesive.0.0.0-10. improved performance.0-10.0 0. Reliable. How fast? • Pricing and feasibility in 1 day • Customized sample rolls up to 10" wide shipped within 7 days* • Order shipped within 21 days Use the R3 Component Matrix to check adhesive/liner/carrier compatibility.5.0-10. if you don’t see what you’re looking for.5 2.0 mils 1.0 76# Extensible Kraft 6.0 2. 2-mil vapor coated also available for 100. 3. 3.0. And 3M adhesives. Through the R3 Custom Program. You can more rapidly meet your customer specifications and expectations with custom combinations of 3M components you know and trust. 3.5 million square inches or five master rolls by 180 yards.2 mils 1. and liner.0. 3M can help you rapidly respond with reliable custom solutions for jobs ranging from gasketing and durable graphic attachment to laminating in high temperature electronics applications. just consult with your 3M representative and the R3 technical team will start on the right solution right away.5 †† • Double-linered constructions are outside the matrix.0 1.0.5 220** 300 300LSE** 300MP** Double-Coated Construction Carrier Clear Polyester White Polyester Black Polyester White Polypropylene †† 300MP 350 400 420** † Mils 0. And remember. improved process… if you think these benefits can help you bring a better. R3: Rapid.5 3. 3. just ask your 3M representative and we’ll put the best minds in the adhesive industry on your challenge right away.0 Adhesive 100* 100MP** 200MP** Configuration available Available for test sell 0.0. and carriers are stocked in depth and backed with the experience to get what you need right and fast. You can rely on 3M for a comprehensive and versatile line of bonding tapes. 3.5 2. 55# Densified Kraft 3.0 mils 1. more competitive product to market. Minimum orders start at only 1. 2 4.2 4.2 48" x 180 yds 48" x 180 yds — — 10 10 7 7 1 1 2 2 10 10 -40 (-40) -40 (-40) 530 (276) 530 (276) 48" x UL M*** 180 yds 48" x UL M*** 180 yds 10 10 9 9 1 1 3 3 9 9 -40 400 (-40) (204) -40 400 (-40) (204) 3M™ High Tack Acrylic Adhesive 300 927 950 Attach gaskets and a variety of industrial foam materials. LSE plastics and oily materials.2 — — 7 7 7 7 8 8 4 4 6 6 *Adhesion levels of 1-10.2 DK liner 3M™ High Performance Acrylic Adhesive 200MP 467MP 468MP Industry standard for graphic attachment. 2 5 60# DK 60# DK 3. 58# PCK 4.5 2 5 58# PCK 58# PCK 58# PCK 4. ten being the highest.2 48" x 180 yds 48" x 180 yds 54" x 360 yds 54" x 360 yds UL UL 9 9 10 10 10 10 9 9 8 8 -40 (-40) -40 (-40) -40 (-40) -40 (-40) 450 (232) 450 (232) 450 (232) 450 (232) 2 5 58# PCK 58# PCK 4. **Double coated with non-woven carrier ***M means Mil-P-19834B Type 1 17 .2 4. 9085 5 3.2 UL UL UL 10 10 10 7 7 7 1 1 1 2 2 2 10 10 10 3M™ Ultra-High Temperature Acrylic Adhesive 100HT White 9082 2 3.2 UL UL UL 9 9 9 10 10 10 10 10 10 1 1 1 7 7 7 3M™ High Tack Acrylic Adhesive 300MP Economical bonding for LSE materials and 9770 2 for lamination to open and closed cell foams.2 48" x 180 yds 60" x 180 yds M*** 7 7 8 8 7 -40 (-40) -40 (-40) 250 (121) 250 (121) 58# PCK 4. F9473PC 2 5 10 58# PCK 58# PCK 58# PCK 4. excellent adhesion to plastics 9485PC 5 62# PCK and foams. Resists fogging for automotive 6035PC 5 interior fabric joining applications. 3M™ Acrylic Adhesive 420 High tack. 3.2 4.2 4. general industry joining and die cut parts.5 3.2 4.2 4. 4.Electronic Thin Attachment Films 3M Adhesive Transfer and Double-Coated Tapes ™ Tapes Liner Product Description/ Application Ideas Adhesive Caliper mils Adhesion* Chem Temp Range Master HSE LSE Low Type Caliper Specs Metal Foam Resist °F (°C) High mils °F (°C) Size Plastic Plastic 60" x 180 yds 60" x 180 yds 60" x 180 yds -40 (-40) -40 (-40) -40 (-40) 500 (260 500 (260 500 (260 3M™ High Temperature Acrylic Adhesive 100MP F9460PC High performance F9469PC industrial joining and metal fabrication.2 — 7 7 8 8 7 3M™ High Performance Acrylic Adhesive 350 High tack and shear 9482PC 2 62# PCK strength. 2 5 58# PCK 58# PCK 4.2 Excellent heat DK liner resistance in highWhite temp environments.5 48" x 180 yds 48" x 180 yds 54" x 180 yds 54" x 180 yds 54" x 180 yds — UL 7 7 9 9 9 9 9 9 6 6 -40 (-40) -40 (-40) -40 (-40) -40 (-40) -40 (-40) 250 (121) 250 (121) 300 (148) 300 (148) 300 (148) 3M™ Low Surface Energy Acrylic Adhesive 300LSE 9453LE 9471LE 9472LE Bonds graphics to powder coatings. can F9752PC be applied in temperatures as low as F9755PC 32°F (O°C). 2 54" x 180 yds — 9 10 10 1 7 -40 (-40) 300 (148) 7 8 8 7 -40 (-40) 250 (121) 3M™ High Performance Acrylic Adhesive 350 High performance 9500PC with good chemical resistance.5 PET 2. Silicone keypad attachment. Offers improved handling and 9495MP ease of die cutting. ten being the highest.0 6. PET/ PCK 38" x 108 yds -40 (-40) 450 (232) 9731 5. Adhesive 300LSE 9490LE bonds to powder coated metals. graphic attachment and cell phone lens attachment.6 PET 61. 6. 5.2 54" x 180 yds 54" x 180 yds — — 7 7 7 7 8 8 4 4 6 6 -40 (-40) -40 (-40) 450 (232) 450 (232) *Adhesion levels of 1-10.6 PET 83# PCK 6.2 48" x 180 yds 54" x 180 yds — UL 10 10 Adhesion* Chem Temp Range HSE LSE Caliper Master Low High Type Specs Metal Foam Resist °F (°C) °F (°C) mils Size Plastic Plastic 9 9 1 1 2 2 9 9 -40 (-40) -40 (-40) 400 (204) 400 (204) 3M™ Low Surface Energy Acrylic Adhesive 300LSE 9495LE Double-coated version of transfer tape 9472LE.5 5.5# PCK 4.7 PET 58# PCK 4.Tapes Electronic Thin Attachment Films 3M Adhesive Transfer and Double-Coated Tapes ™ Liner Tape Carrier Description/ Product Caliper Application Ideas Type mils 3M™ High Performance Acrylic Adhesive 200MP Double-coated 9492MP version of transfer tape 468MP. 7 6. 3.9/5.5 5.0 — 9 10 10 9 8 3M™ Acrylic Adhesive 420 9783 9795 For cell phone lens attachment. oily metals and LSE plastics.2 4.7 PET 58# PCK 4. 2. printer toner cartridge refurbishing.2 54" x 180 yds — 7 7 8 9 7 -40 250 (121) (-40) 3M™ Differential Adhesive 300MP/300LSE Adhesive 300MP for foam laminating. Improved handling and ease of die cutting.6 PET PET PET 83# PCK 2.2 54" x 180 yds UL 9 10 10 1 7 -40 (-40) 300 (148) 3M™ High Tack Acrylic Adhesive 300MP 9690 For foam lamination. foam lamination and graphic attachment. 18 .5 48" x 108 yds — 9 10 10 9 8 -40 (-40) 450 (232) 3M™ High Performance Acrylic Adhesive 350/Silicone Differential Differential adhesive – silicone adhesive on face side.7 PET PET 58# PCK 58# PCK 4. 5. Tape Selection Guide Adhesive Family Characteristics Product Characteristic • Up to 450°F short-term heat resistance and excellent solvent resistance • High peel strength compared to other acrylic formulations • Exceptional shear strength even at elevated temperatures • Exhibits low outgassing characteristics • Up to 500°F short-term heat resistance and outstanding solvent resistance • Higher peel strength than most other acrylic formulations • Exceptional shear strength even at elevated temperatures • Up to 550°F short-term heat resistance and outstanding solvent resistance • Higher peel strength than most other acrylic formulations • Exceptional shear strength even at elevated temperatures • Up to 400°F short-term heat resistance and excellent solvent resistance • Outstanding adhesion to metal and high surface energy plastics • Excellent shear strength to resist slippage and edge lifting • Short term repositionability for placement accuracy • Up to 250°F short-term heat resistance • High initial adhesion. foams. especially to low surface energy plastics • Quick flowing to speed lamination of textured plastics. powder coated paints and lightly oiled metals • Good chemical and humidity resistance • Up to 250°F short-term heat resistance for automotive interior applications • Designed especially to bond most plastics and foams • Economical attachment of graphics • Up to 450°F short-term heat resistance • Excellent solvent resistance and adhesion to LSE materials • Up to 450°F short-term heat resistance • High tack adhesive Tapes 100 High Temperature Acrylic 100MP High Performance Acrylic 100HT Ultra High Temperature Acrylic 200MP High Performance Acrylic 300 High Tack Acrylic 300LSE Low Surface Energy Acrylic 300MP High Tack Acrylic 350 High Performance Acrylic 420 Acrylic Adhesive 19 . fabrics and coated papers • Up to 300°F short-term heat resistance • Outstanding adhesion to low surface energy plastics. chemicals. 3M also helps you put that technology to work just about anywhere in the world with global service. Instruction. Thermal Transfer Polyester with High Precision Adhesive 310 Inventory Control Label Low cost. Thermal transfer printable. and more. tracking. with adhesion to many surfaces for life of product. please contact 3M Performance Label 800-422-8116 High tack adhesive with ultra clean removal. informing. Survives solder processing.8 2.8 2.9 2. warning.0 3.2 3. Tamper evident material destructs if attempts are made to remove from substrate. printable label material for lens protection applications. protecting.3 3.9 2.8 1.9 4.9 2. or Warning Label Thermal Transfer Polyester with High Holding Adhesive 350 Gloss white Gloss white Matte platinum Gloss white Matte silver Matte white Gloss white Matte silver Platinum Gloss white Matte white Matte white Matte white Matte white Gloss white Gloss white Matte platinum Matte white Gloss white Platinum Gloss white Matte silver Matte white Matte white Matte white Matte black on white Matte silver on black Thermal transfer printable. OFM2402 Barcode printable with high temperature resistance.0 4. Permanent yet cleanly removable on many substrates. or moisture. topcoats. PS.6 Color Identifying/Informing/Warning Certification. with adhesion to difficult surfaces for life of the product.1 2.A "unique identifier" containing data elements used to track Department of Defense parts through their life cycles. Low cost.8 2. Tamper Indicating Label Tamper indicating material designed to provide triangle pattern when removal is attempted. Low-outgassing adhesive resists flagging and edge lifting on disk drive applications. Film liner offers excellent graphic appearance.9 2. Tamper evident material destructs if attempts are made to remove from substrate.9 2.000 combinations.1 2. That means technology and solutions for most labeling requirements for notebook and desktop computers. VOID Tamper Indicating Polyester with High Holding Adhesive 350 VOID Tamper Indicating Polyester with Tackified Adhesive P1410 Triangle Tamper Indicating Polyester with Tackified Adhesive P1410 Destructible Vinyl with High Holding Adhesive 350 Destructible Vinyl with High Holding Adhesive 200 7381/7866 7380 FMV22 FMV02 FMV01202 FMV01402 7613 7885 3. durable label construction. general purpose thermal transfer OFM03402 Thermal Transfer Polyester with label material with adhesion to many surfaces High Performance Adhesive P1400 for life of the product. With 3M adhesives.8 Ultra clear Gloss clear Clear Gloss clear Matte clear Gloss clear For information or samples. with adhesion to many surfaces for life of the product.3M Performance Label Materials ™ Tapes Applications and general properties of 3M™ Performance Label Materials Technology and capability for identifying. Overlaminate Protects surface of label from abrasion. Dot matrix printable.9 4.9 2.0 2. printers. sunlight.6 3.0 Gloss white Matte white Gloss white Bright silver Bright silver Gloss white Matte white Matte white Protecting Ultra clear.8 2. peripherals. Thermal transfer printable. 20 . you can mix and match to achieve about 150.8 3.1 2. • Trained sales and technical team representing years of materials and application experience • Application Development Specialists to help customers optimally mix and match label materials • Broad customization capability in the performance labels industry • Testing laboratory for label properties and performance • Custom quotation within 48 hours anywhere in the world • Samples available Application Unique Application Needs Product Family/Description Thickness Product (Face/Adhesive only) mils 7871 7868 7872 FM033202 3. ABS.1 1.0 3. general purpose thermal transfer label material with adhesion to many surfaces for life of the product.8 3. Low tack adhesive with clean removability. expertise.3 3.1 3.0 2. Masking Highly Transparent Polyester with Removable Adhesive Thermal Transfer Polyester with Ultra Removable Adhesive R3500 Press Printable Polypropylene with Ultra Removable Adhesive R3500 Non-topcoated Polyester with High Performance Adhesive P1400 Thermal Transfer Polyester with High Tack Adhesive 400 Non-topcoated Polyester with High Tack Adhesive 400 76991 FM1542 FP0862 OFM010N 7744FL 7730FL 2. and a customer-focused attitude. Thermal transfer printable.8 2. mobile phones. Label stock is recycling compatible with PC. facestocks and liners. High Temperature Polyimide (Kapton™) with High Temp Adhesive 100 High Temperature Acrylate with High Temp Adhesive 150 Laser Etch Acrylate with High Holding Adhesive 350 7811-DMI 7812-TT 3921 7847 7848 PCB Tracking Label Laser Markable Label Material Securing Tamper indicating stocks designed to provide a “void” message in the facestock when removal is attempted. Identification and Information Label Cost effective thermal transfer printable. HIPS & PC/ABS plastics. Laser etchable film. High temperature resistance.8 4.2 3 3 3 3 3 3. Thermal Transfer Polyester with High Performance Adhesive P1650 FM043702 7815 7816 Thermal Transfer Polyester with High Precision Adhesive 310 7818 7875 OFM03402 Thermal Transfer Polyester with High Performance Adhesive P1400 OFM03502 Recycling Compatible ABS with High Holding Adhesive 350 Thermal Transfer Polyester with Removable Adhesive 550 8000 5770 5770NF 5771 5771NF 5772 7815 7816 7875 Recyclable Label Re-work Label Tracking Cost effective thermal transfer printable. and securing.8 3. May be suitable for DoD UID . /in.3M Damping Polymers ™ Tapes 3M™ Viscoelastic Damping Polymers have been proven to reduce vibration and shock problems in electronics. (N/100mm) D-3330 70 (77) 80 (88) 35 (38) 100 (109) Temperature Range °F (°C) 32-150 (0-65) 32-150 (0-65) 32-150 (0-65) 32-150 (0-65) These products have an Adhesive Transfer Tape backing/adhesive structure. These versatile materials can be adapted to a wide variety of applications. free layer dampers. panel. pipe and wing dampers. including speakers and touch pads • Sporting goods. multi-layer laminates using metal or polymeric films. suspension dampers. and more. Product ASTM Test Method 242F01 242F02 242NR01 242NR02 Adhesion to Steel oz. including spacecraft and commercial aircraft Product Thickness mils 110P02 110P05 112P02 112P05 2 5 2 5 • Electronics. 21 . depending on precision of placement Damping polymers for voice coil motors 3M Ultra-Pure Damping Polymers 3M understands that small vibrations in disc drive operations can lead to reduced drive performance and eventually to breakdown. or short term high temperature exposure • Damping in temperatures ranging from as low as 32°F (0°C) to as high as 221°F (105°C) • Select Loss Factor and Storage Modulus values to meet requirements Processing Versatility • Select a polymer to bond with pressure only. including washing machines Typical Performance Characteristics Note: This technical information and data should be considered representative or typical only. automobiles and aircraft./in. including body panels and under the hood • Aerospace. or with heat and pressure • Choice of liners to meet different handling requirements • Wide range of thicknesses to meet design requirements ™ • Use with a variety of substrates • Capable of laminating layers to create thicker products • High or low initial tack. Liner Paper Paper Paper Paper Adhesion to Stainless Steel oz. Market Application Areas • Automotive. (N/100mm)1 88 (96) 38 (42) 100 (109) 144 (158) • Good damping performance at higher temperature: 104-221°F (40-105°C) • Heat and pressure needed for bonding • Good damping performance at 32-142°F (0-65°C) • Pressure only for adequate bonding at room temperature (70°F/21°C ) for many applications Market Application Areas • Choice of enhanced acrylic polymer for improved vibration damping • Choice of good to excellent thermal stability for long term applications at moderate temperatures. isolators. and should not be used for specification purposes. including cover constrained layer dampers. including golf clubs and tennis racquets • Appliances. appliances. 3M™ Ultra Pure Viscoelastic Damping Polymers are low outgassing adhesives that reduce chemical contamination and corrosive ions that can enter critical damping area environments. high shear Product Tape Structure Total Carrier Thickness Thickness mils mils Adhesion to Steel oz.7) 192 Low tack process aid. (N/100mm)1 Tensile Elongation Strength at Break lbs/in./in.000 min 0. phenols.7 2. Permanent adhesive on both sides. 4 mil polyethylene * Modified ASTM 4626 .2 (354) 20.5 1.1) 52 (TBD) 27 (TBD) 120 120 Polyester/Acrylic 0.8) 46.chloride.5 0. Product Adhesives Type Thickness Liner mils 1 2 FL FL Core Adhesion oz. permanent but still removable. That market leadership continues today. • Silicone free adhesive and liner • Various release levels of silicone free liners combinations – low outgassing and low • Ultra-pure damping polymers available in potential for corrosion. odor and fogging die cut shapes • Variety of adhesive choices: temporary. sulfate 22 ./in. acrylates. labels and damping polymers – each offering multiple choices of silicone free liners.9 1.000 g µg/cm2 >10.000 min >10. double-sided and free standing adhesive transfer tapes. and permanent Refer to technical data sheets to get outgassing data for the specific product you need. These products build on established market leading outgassing performance by enhancing specific chemical attributes which demanding customers have identified.9 1.15 <0.) 72 105 Static Shear Total Outgas* Total Ionics** µg/cm2 RT 1. very low outgassing and low ionics pressure sensitive adhesive and liner technology. Very Low Outgassing Tapes ™ Tapes 3M pioneered the development of silicone free.3M Ultra Clean. (N/100mm) D-3330 Tensile Elongation Strength at Break lbs/in. esters. DS low extractable silicone liner.8) 31 (34.9) 29 (TBD) 120 Linered.Hydrocarbons.9 2.3~1./in. ** Typical total ionics by ion chromatograph . etc. acetates.5 <0. nitrate.6 (2.8 29 (31.5~2. NR denotes non-silicone liners on both sides .8 (364) 120 125 Removable adhesive on one side and permanent adhesive on the other side.1 (807. % (N/100 mm) Comments 3M™ Double-Sided Tapes 55334 55106 Adhesive/PET Carrier/Adhesive Adhesive/PET Carrier/Adhesive 1 1 3 3 Removable side: 46 (50) Permanent side: 59 (65) 56 (61) 20.9 0.8 18 (19. Product ASTM Test Method Tape Structure (Backing/ Adhesive) Total Backing Thickness Thickness mils mils D-3652 D-3652 Adhesion to Steel oz. Temp range up to 248°F (120°C) Non-silicone film liner General purpose Polyester/Acrylic Polyester/Acrylic 1. % (N/100 mm) D-3759 D-3759 Comments 3M Single-Sided Tapes ™ Very Low Outgassing 6670 Very Low Outgassing 6692 Polyester 8333 Very Low Outgassing High Shear Polyester 8439FL Polyester/Hydrocarbon 1. FL denotes 2 mil PET.15 3M™ Ultra-Clean Laminating Adhesives 501FL 502FL Acrylic/Permanent Acrylic/Permanent Plastic Plastic Note: In the product codes. alcohols. with continuous additions to this product family of single-sided. organic acids. (1/2 in.2 mil PET. The product retains most of the premium attributes of 5557 indicator tape. which may be used in certain product designs. including high efficiency rotary. accurate and easy way to positively detect water intrusion into sensitive electronic devices. The red color change is irreversible after drying. 0 Hours Exposure 7 Days Exposure After Water Contact Before After 23 . while quickly turning bright red on contact with liquid water. total caliper and printability. the absorbent indicator layer quickly changes from white to red.2 mils Yes Yes Yes Good Best 2 mil Film Yes 12 180 5557NP 8. indication speed. and offers a comprehensive package of environmental stability. Water Contact Product Selection Matrix Product Caliper Film Overlam Thermal Transfer Printable Other Print Techniques Indication Speed Humidity Resistance Liner Type UL-969 Max. 3M™ Ultrathin Water Contact Indicator Tapes 5558 and 5559 offer a thinner total caliper. 3M™ Water Contact Indicator Tape 5559i has the same attributes as tape 5559 except the adhesive is on the top side for viewing through transparent substrates. while offering enhanced indication speed through removal of the top film layer. 3M™ Water Contact Indicator Tape 5557NP is a new addition to this family. Width (Inches) Length ( Yards) 5557 10.Warranty and Security Tapes Tapes 3M Water Contact Indicator Tapes ™ 3M™ Water Contact Indicator Tapes provide a fast. 3M Water Contact Indicator Tapes are long lasting. Not affected by heat and humidity. where tight geometries dictate a very low thickness water indicator product.6 mils No Fair Yes Best Better 2 mil Film No 12 180 5558 6 mils Yes Yes Yes Good Better 2 mil Film No 12 180 5559 5 mils No Fair Yes Best Good 2 mil Film No 12 180 5559i 5 mils No No No Best Good 2 mil Film No 12 180 When liquid water contacts the tape edge. Indicator layer and polyester liner combine for easy and accurate die-cutting. and have shown exceptional resistance to wash-out and bleach-out from strong oxidizers. 3M™ Water Contact Indicator Tape 5557 is the workhorse of this product family. This family of products offers excellent temperature and humidity resistance. 04) 1.3M Cleanroom Tapes ™ Tapes 3M™ Cleanroom Tape Products are specifically prepared and packaged for direct introduction and application into cleanroom manufacturing facilities.04) mils (mm) D-3652 5. Clean room./in. De-taping applications. (N/cm) 20 (35) Features General use utility tape for electronic components and assemblies. Remove from Roll volts 5 Adhesion to Steel oz.07) Adhesion to Steel oz. used for applications including color coding. (N/cm) 15 (1. Clear.10) 1. Clean room. Product ASTM Test Method 1251 White/Yellow/ Vinyl/Rubber Transparent 1254/Transparent 1258/Amber 3305/Transparent Polyester/ Rubber Polyimide/ Silicone Polyester/ Rubber Tape Structure (Backing/ Adhesive) Backing Total Thickness Thickness mils (mm) D-3652 4.7) 5 24 .6 (0. Antistatic conductive polymer adhesive. 3M™ Cleanroom Tape 1254 offers a very high tack formulation.07) 2. Very high tack. General use utility tape for electronic components and assemblies.7) Remove from Stainless Steel volts 5 40PR Polyester Film 20 (35) 5 15 (1./in. suitable for creating temporary barriers during cleanroom construction or maintenance. Very high tack. printed with antistatic symbol. floor marking and isolation of maintenance activities. (N/100mm) D-3330 23 (25) 145 (160 20 (22) 120 (131) Tensile Strength lbs/in.2 (0. Antistatic conductive polymer adhesive. High temperature Low static. sealing.10) 2. Clear.0 (0.13) 4.03) 1.7 (0. 3M™ Cleanroom Tape 1251 is a general purpose vinyl tape. (N/100 mm) D-3759 16 (280) 25 (440) 33 (578) 43 (753) Elongation Temperature at Break Range % D-3759 130 18 60 180 °F (°C) D-3759 40 –170 (4 – 77) 40 – 200 (4 – 93) -100 – 500 (-73 – 260) 40 – 200 (4 – 93) Comments General purpose.4 (0. Their plastic cores and double polyethylene bag packaging eliminate contamination from dirty cardboard and paper products.1 (0.1 (0./in. Available in one transparent and two color tape variations.7 (0. Product 40 Backing Polyester Film Adhesive Antistatic Polymer Conductive Antistatic Polymer Conductive Breaking Strength oz. cold. including powder coated paint • Meets UL V2 performance requirements Modified Acrylic 300°F 250°F (149°C) (121°C) High High Med • Bonds to a variety of plastics and paint systems 5958FR 45 (1. These 3M™ VHB™ Tapes are made with acrylic foam which is viscoelastic in nature. office furniture and telecommunications equipment • Bond aluminum skin to steel support High Med of trucks. liquid adhesives and other permanent fasteners. vans and ambulances • Bond architectural signs to frames 4611 45 (1. Relative Temperature Adhesive Resistance Solvent Adhesion Type Minutes Days Resistance Hours Weeks HSE LSE °F (C) Application Ideas 3M™ VHB™ Conformable Foam Tapes • Bonds muntin bars to windows • Bond and seal polycarbonate lens over LCD • Bond pre-painted metals in truck High Med assembly • Bond and seal plastic windows to pre-painted control panels/switch gear • Mount vinyl wiring ducts and conduit channels 4941 45 (1. they can replace rivets. closed-cell acrylic foam carrier • Conformable • Good adhesion to many painted surfaces.1) • Black. In many situations.0 (0. closed-cell acrylic foam carrier • Very conformable • Good adhesion to many painted surfaces.13) • UL 746C 500°F 300°F (260°C) (149°C) • Bond decorative metal trim High Low • Bond flexible circuits to aluminum rigidizers or heat sinks 100MP High 25 . spot welds. including powder coated paint • UL 746C • Black. The acrylic chemistry provides outstanding durability and performance.1) High Thin VHB Foam Tapes provide excellent shock and vibration resistance without the cure times of silicone.0 (0. closed-cell acrylic foam carrier Modified • All purpose adhesive Acrylic • UL 746C 300°F 200°F (149°C) (93°C) • Pre-powder coat paint applications: High Med hat channels and stiffeners • Attach stiffeners in air conditioners.3M VHB Tapes ™ ™ Tapes 3M™ VHB™ Tapes provide the convenience and simplicity of a tape fastener and are ideal for use in many interior and exterior bonding applications. closed-cell acrylic foam carrier General Purpose • High temperature Acrylic resistance • UL 746C • White.64) 5952 45 (1. UV light. 3M™ VHB™ Conformable Foam Tapes • Dark gray. 4950 45 (1.1) • Gray closed-cell acrylic foam carrier • Conformable • Good adhesion to many painted metals MultiPurpose Acrylic 300°F 200°F (149°C) (93°C) High 5925 25 (0.1) Die cut to precisely fit any shape. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. • Bond with high holding strength for static and dynamic strength • Provide a continuous bond to distribute stress over entire area • Holds up to high temperature.1) 300°F 250°F (149°C) (121°C) High 3M™ Adhesive Transfer Tapes F9460 PC F9469 PC 2. size or profile. temperature cycling.05) • Clear adhesive transfer tape • High shear strength adhesive 5. moisture and solvents Tape Product Thickness Number w/o liner mils (mm) Description • Damp vibration • Seal against environmental conditions • Join dissimilar materials • Separates metals to reduce potential for galvanic corrosion Virtually invisible fastening helps keep surface smooth and clean to enhance design and appearance. potential vibration damage Attach only similar materials Very strong Can scratch and crack plastics Incomplete 3M™ Cyanoacrylate Adhesive Bonds on contact May flow beyond bond area Bonds dissimilar plastics/materials Very strong but brittle and can crack Causes blooming Complete Typical Uncured Properties ™ ™ ™ Characteristic 3M Plastic Bonding 3M Plastic Bonding 3M Plastic Bonding Adhesive 2665 Adhesive 2669 Adhesive 2679B Bead of 3M™ Plastic Bonding Adhesive 2665 Application Temperature Viscosity (@230°F/110°C) Color (solid) Set Time 230°F (110°C) 8. no blooming Complete Poor Ultrasonic Welding Very fast Difficult.000 cps Black 4 minutes Overlap Shear Strength (psi). flexible to withstand impact Virtually invisible. and other consumer electronics • Thin. MP3 players. and even hard-to-bond plastics such as polycarbonate Characteristic Production speed Bond thin plastic joints Bond dissimilar plastics/materials Bond strength Appearance Complete seal Best Caution Adhesives Note: This technical information and data should be considered representative or typical only. Thermal Shock (TS)* and Temperature/Humidity (TH)** Substrate Polycarbonate ABS Acrylic Stainless Steel PVC OLSS (PSI) 73°F (23°C) 940 690 830 465 560 After TS 1. and yield • High tack holds parts together for immediate • One-component formulation eliminates handling and fast production potential inconsistencies of metering and mixing • 4-minute open time allows initial repositioning even with thin bond lines that would otherwise • 100% solids provides a low-VOC system with cure too quickly for assembly no drying equipment and no attack on plastics • High viscosity holds bead shape and size in • Bonds and seals simultaneously small. and reliability from cyanoacrylate and cracking from ultrasonic welding • High strength bonds plastics and metals. dissimilar substrates. portable batteries. These materials are available in 30cc syringes.115 565 715 590 NT After TH 945 795 715 490 NT *Condition for TS: -40° to 85°C. tough and flexible bond lines help • Improved appearance without the whitening improve fit. 2669. High tack beads with long open time for thin bond lines 3M™ Plastic Bonding Adhesive 2665. and should not be used for specification purposes.000 cps White/Off-white 2-4 minutes 230°F (110°C) 5.000 cps White/Off-white 2 minutes 230°F (110°C) 6. productivity. but with a long open time for easy assembly of parts requiring a thin bond line.3M Plastic Bonding Adhesive ™ For thin bond line of small joints in lens/case assembly and more 3M™ Plastic Bonding Adhesives are moisture curing urethanes that apply warm and sets like a hot melt adhesive. defined areas High performance for lens/case and housing assembly in cell phones and notebooks. appearance. Lower overall assembly with improved efficiency. 2679B Fast with very high tack yet long open time for assembly Bond lines less than 1mm wide Hard-to-bond plastics can be bonded after simply wiping off Very strong even in small areas. 30 minute dwell for 20 cycles **Condition for TH: 68°C/95% RH for 3 days NT: Not tested 26 . Tested @ 73°F (23°C). 000 A-18.000-22.000-22.000 A-10. This makes Scotch-Weld EG Epoxies ideal for the fabrication and assembly of critical components.000 A-60.000-22.000 @ 74°F (23°C) B-35.3M Epoxy and Hot Melt Adhesives ™ 3M Scotch-Weld Electronic Grade Epoxy ™ ™ For assembly of sophisticated electronics where outgassing and corrosion of material bonds are a concern. Scotch-Weld EG Epoxies produce far lower contamination levels of ionic and outgassing impurities than typical epoxy adhesives.000 @80°F (27°C) B-22.000 @ 74°F (23°C) 8-10 min 4200 30 DP-810 Black 8-10 min 4200 30 3M™ Scotch-Weld™ Structural Plastic Adhesive DP-8005 DP-8010 — — — — 2075CF** 2200CF** N/A N/A 3M™ Scotch-Weld™ Hot Melt Adhesive 3748 Off-white 3748 VO Light Yellow 5000 @ 374°F (190°C) 5500 @ 374°F (190°C) N/A N/A 200 220 FR-4 FR-4 40 35 FR-4 FR-4 * RT cure with 160º F (71ºC).000 @ 74°F (23°C) B-18. 2 hour post cure. our two-part 3M™ Scotch-Weld™ Electronic Grade (EG) Epoxies are an excellent alternative to mechanical fasteners and lower-grade adhesives.000-22.000 @ 74°F (23°C) B-35.000 A-18. 27 .000 A-10.000 A-10.000 @ 74°F (23°C) B-35.000 @ 74°F (23°C) B-35.000 @77°F (25°C) B-4.000 A-6.000 @ 74°F (23°C) B-7.000 @77°F (25°C) B-100.4 min 18-28 min 90 min 60-70 min 20 min 60 min 1500 3500 2500* 2200* 2400 4400 4600 2 13 35* 20* 2 49 50 3M™ Scotch-Weld™ Electronic Grade Epoxy Adhesive DP-460 EG DP-4XL EG 60 min 5-6 hr 4600 4500 50 45 3M™ Scotch-Weld™ Structural Acrylic Adhesive DP-810 B-18.000 A-14. Product Viscosity cps Adhesives Mixed Work Life @ 74°F (23°C) Shear Strength Aluminum Average T-Peel at 75°F (24°C) PSI piw 3M™ Scotch-Weld™ Epoxy Adhesives DP-100 DP-100 Plus Clear DP-125 DP-190 Gray DP-270 Clear/Black DP-420 DP-460 B-12.000 A-10.000 @ 74°F (23°C) 3-5 min 3. ** CF=cohesive failure 3M offers dispensing systems to meet the most exacting fabrication and assembly applications.000 A-18.000 A-10. memory disks. fresh minerals are continuously exposed.1. ensuring a fast and extremely consistent cut rate through the long life of the abrasive. no rounding Applications • Polishing fiber optic connectors and rigid memory discs • Texturing thin film discs Product 631X 641X 660XV 661X/668X 661XU 662XW/666XW 663X/664X • Better finish. 3M Diamond Lapping Films ™ A cleaner. Maximum diameter and width is 10".5. 30.5. 45 and 60µm 3M Trizact Diamond Lapping Film ™ ™ Helps reduce finishing times with our innovative microreplicated structured abrasives. no rounding • Flat cut curve Product 661XA Backing Type Plain Back/PSA Backing Thickness mils (mm) 3. 2 and 9µm 28 . 9.0 1. 0. rolls and sheets.0 3. no chipping • Increased throughput • Longest abrasive life • Flatter surface.0 3. more consistent alternative to diamond compounds and slurries. 3M™ Diamond Lapping Films can reduce polishing time. achieve superior flatness and edge finish.Abrasives for Electronic Finishing Eliminate defects and achieve the precision finish your operation demands with advanced abrasive products from 3M.0 Bonding Resins Standard Resin Standard Resin Precision Coated Type H Standard Resin Precision Coated Type H. 1. cost-effective abrasives bring superior consistency to lapping and polishing fiber optics.0 3. Available grades: 0. Military HDD Sliders Available in discs. 15. Tough resin system with higher diamond content Type P. 1. sheet and disc form.5. Available grades: 0. wafer substrates.0 3. no chipping • Long abrasive life minimizes disc changes • Less cleaning of finished parts • Roll superfinishing • Flat lapping applications Backing Type Plain Back Plain Back Plain Back Plain Back/PSA Plain Back/PSA Plain Back/PSA Plain Back/PSA Backing Thickness mils (mm) 1. As these film-backed abrasives are used. Abrasives Key Features and Benefits • Faster cut • Increased throughput • Flatter surface. and other photonic and electronic components. and eliminate slurry disposal problems. These advanced. Flat Lapping.0 Bonding Resins Microreplication Technology Mineral Diamond Suggested Applications Fiber Optics Available in roll. • Faster cut • Better finish. 3. 6.5 3. Hard Resin Suggested Applications Magnetic Head Lapping Fiber Optics. Medical. Hard resin Aluminum Oxide (AIO) Standard Type P. These high-quality films provide a precision finish every time. Key Features and Benefits • Uniform coating • Tight mineral particle distribution Applications • Polishing fiber optic connectors and rigid memory discs • Texturing thin film discs Product 061X 254X 261X 262X 263X 265X 266X 268X 452X 461X 462X 463X 464X 466X 468X 468XW 468XY 562X 863X 863XW 865X 869X 869XW • Full line offering • PSA/non-PSA offered • Roll superfinishing • Flat lapping applications • Fiber bundles for medical Bonding Resins Suggested Applications Abrasives Backing Backing Thickness Type mils (mm) Plain Plain Plain Plain Plain PSA PSA PSA Plain Plain Plain Plain Plain PSA PSA PSA PSA Plain Plain Plain Plain PSA PSA 3 2 3 3 3 3 3 3 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 Mineral Types Chromium Oxide (Cro) Standard Aluminum Oxide (AIO) Standard Aluminum Oxide (AIO) Standard Aluminum Oxide (AIO) Softer resin Fiber Optics Fine/Super Finishing Coarse Electronic Head Finishing Super Finishing/Fiber Optics Flat Lapping Fiber Optics Floppy Disc Burnishing Fiber Optic Connectors Aluminum Oxide (AIO) Type P. Hard resin Standard Easy breakdown resin for MT connector polishing Fiber Optic MT Multifiber Connectors Harder resin Cerium Oxide (Ceo) Standard Standard Standard Silica (SiO) Standard Standard Standard Fiber Optic Final Polish Flat Lapping Fiber Optic Connectors Bare Glass Fibers Fiber Optic Connectors Available in discs. Hard resin Silicon Carbide (SiC) Type P. 29 . consistent finish.Abrasives for Electronic Finishing 3M Lapping Films ™ 3M™ Lapping Films have precisely graded mineral coated on a high strength polyester backing to provide a uniform. rolls and sheets. Hard resin Aluminum Oxide (AIO) Standard Silicon Carbide (SiC) Type F-2 Silicon Carbide (SiC) Standard Harder resin Silicon Carbide (SiC) Easy breakdown resin for MT connector polishing Fiber Optic MT Multifiber Connectors Type P. slurry coated onto a non-woven synthetic backing. resin bonded to a polyester backing • Better control of fiber protrusions • Improved throughput Product (plain back) 591X 291X • Fewer rejects • Elimination of slurry cleanup • Reduced equipment maintenance costs Product (PSA backing) 598X 298X 498X 958M 968M Mineral Cerium Oxide Aluminum Oxide Silicon Carbide None None Suggested Applications MT Connectors Plastic Polishing Metal Polishing Cleaning Parts Glass Polishing Abrasives 491X 951M 961M Available in roll. Can also be used to repair: CDs/CDVs scratches Aircraft plastic windshield and side windows Jewelry Acrylic parts Probe card cleaning Cell phone refurbishing Warranty repair Plastic repair Probe Card 30 . glass and metal finishing Color/Grade Product 281Q 286Q 286Q 481Q 486Q 486Q Regular PSA Hookit Attachment Systems Regular PSA Hookit Attachment Systems Backing Mineral Aluminum Oxide Aluminum Oxide Aluminum Oxide Silicon Carbide Silicon Carbide Silicon Carbide Lt. even on highly contoured surfaces. 3M Wetordry Polishing Paper ™ ™ Comprised of micron graded particles. sheet and disc form. consistent finish • Shortens hand-sanding and buffing time • Reduces finishing steps and saves time • Color-coded micron grading for easy selection • Plastic. Green 1µ X X Mint 2µ X X Pink 3µ X X X Blue 9µ X X X Grey 15 µ Green 30 µ X X X X X X Available in roll.Abrasives for Electronic Finishing 3M Polishing Films ™ • Micron-graded particles. • Use wet or dry • Precision micron grading for a uniform. sheet and disc form. The superior flexibility of this product allows for fast and easy finishing and polishing. Adhesive-backed versions bond to bare or painted metal. 3M™ Hook and Loop Fasteners give you choices that improve your product and save production time. Industrial-strength fasteners for easy opening and closing. Pre-cut shapes are available with pressure sensitive or plain backing. Pop-in stems. When the mushroom-shaped stems interlock. tiny. The molding holds the sign face in place and is readily removed for bulb replacement. and more. glass. 3M™ Dual Lock™ Reclosable Fasteners invisibly attach access doors and panels. 3M™ Dual Lock™ Reclosable Fasteners Low Profile is thinner than standard Dual Lock reclosable fasteners and is available in clear for color matching or black. low and high temperature resistance. signs. Yet you can readily open and close Dual Lock reclosable fasteners hundreds of times. sealed wood. for general purpose applications. Depending on your application. When closing. many plastics including plasticized vinyl. Adhesive formulations are designed with a wide range of performance characteristics including: flame resistance. Release liner Pre-cut 3M™ Dual Lock™ Reclosable Fasteners hold access panels in electronic equipment. Interlocking stems Fasteners Adhesive Release liner 3M Hook and Loop Fasteners ™ Die-cut hook and loop fasteners secure metal edge molding around an internally-illuminated sign. The pressure sensitive adhesives bond on contact to a variety of substrates. Release liner Loop with pressure sensitive adhesive Hook with pressure sensitive adhesive Release liner 31 .Fasteners 3M Dual Lock Reclosable Fasteners ™ ™ A reclosable system to replace unsightly mechanical fasteners. and plasticizer resistance for use with most vinyls. simply peel one side away. stiff hooks on one side of the fastener mesh with pliable loops on the other. When your products require thousands of easy openings and secure closings. closure strength of the system is high enough to replace mechanical fasteners in many applications. select non adhesive-backed or adhesive-backed versions. slide-in pieces or mechanical attachments provide alternative options. high shear strength. For opening. and many other frequently removed parts. display components. Choose adhesive-backed or plain-back fasteners. effective cleaning performance with a wide margin of safety for workers and a favorable environmental profile. acrylic and polycarbonate Rating Cleaning Performance +++ Excellent ++ Very Good + Moderate . nPB or HAPs • Non-ozone depleting Aerosol Cleaners Novec Aerosol Cleaners offer great value Based on high performance proprietary 3M formulations. no residue. acrylic and polycarbonate Novec Flux Remover Heavy Duty May damage ABS. They offer an excellent alternative to HCFC 141b-based cleaners. • Low toxicity • Contain no HCFCs. Features of 3M’s proprietary Novec Aerosol Cleaner technology • Non-corrosive • Non-flammable • Fast drying. resulting in more cleanings per ounce than many competitive cleaners. HFCs. PS.3M Novec Aerosol Cleaners ™ ™ 3M™ Novec™ Aerosol Cleaners give you a new way to meet today’s electronics and precision cleaning challenges – combining fast. PS. Novec Aerosol Cleaners Selection Guide Novec Contact Cleaner Cleaning strength Light Duty Plastic-safe Novec Contact Cleaner Plus Medium Duty Plastic-safe Novec Electronic Degreaser Heavy Duty May damage ABS.Not Recommended Plastic compatibility Cleaning Performance Particulate Krytox ® +++ +++ • Light oils Heavy oils and greases Hydraulic fluid Rosin-based flux No-clean flux Lead-free flux Rating Key: +++ +++ ++ – ++ – – – – Not Recommended Yes Yes Yes Not registered NA – • – – – Excellent +++ ++ +++ ++ or +++ +++ ++ ++ ++ +++ ++ +++ ++ or +++ +++ +++ ++ +++ +++ ++ Very Good Yes No Yes K2 137246 • Moderate RoHS/WEEE compliant Meets CA VOC limits Meets OTC VOC limits NSF Registration NSN Yes Yes Yes K2 137245 6850-01-534-2927 Yes Yes Yes K2 137247 6850-01-534-2943 6850-01-534-2919 32 . Novec Aerosol Cleaners contain more active solvent. ODP1 Global Warming Potential .S.0 2 GWP-100 year integration time horizon.ODP1 Global Warming Potential .00 297 3. low toxicity • Effectively removes heavy oils.0 GWP-100 year integration time horizon.0 Low Yes 10 0.03 122 No 50 2. low global warming potential • Test on plastics before using – may damage acrylics.013-0. • Excellent plastics compatibility Aerosol Cleaners Environmental.10 725 9.00 30 No 200 10 3 4 HCFC-141b HCFC-225ca 0. TWA) Margin of Safety (MOS)4 1 2 Novec Electronic Degreaser 0. C02 = 1.00 30 No 200 10 3 4 HCFC-141b 0. low odor • Excellent plastics compatibility • No rinsing and no residues • Non-corrosive.GWP2 Atmospheric Lifetime . greases and handling soils from electric. 8 hr time weighted average) 1 Novec Contact Cleaner 0. C02 = 1.5 nPB 0. low toxicity • Formulated with Novec 7200 fluid which.10 725 9.3M Novec Aerosol Cleaners ™ ™ 3M Novec Contact Cleaner ™ ™ • Non-flammable. • Effectively removes a wide variety of rosin solder ABS and PS fluxes used in electronics manufacturing and repair Board (CARB) regulations – including rosin-based and many no-clean and • Non-ozone depleting. electronic and electrical equipment • Formulated with Novec 7200 fluid.013-0. is VOC-exempt under California Air Resources Board (CARB) regulations Environmental.3 None 7. EPA in the Clean Air Act of 1990 Exposure Guideline Assumed 20 ppmV 8hr TWA exposure 33 . EPA in the Clean Air Act of 1990 MOS in use = Exposure Guideline Assumed 20 ppmV 8hr TWA exposure 3M Novec Flux Remover ™ ™ • Non-flammable.0 As defined by the U.5 CFC-11 = 1. which is VOC-exempt under California Air Resources Board (CARB) regulations • Industrial strength cleaner • Fast drying.ODP1 Global Warming Potential . ABS and PS Environmental. polycarbonates. low toxicity • Ideal for electrical or energized equipment and components • Excellent for cleaning fiber optic connectors • Effectively removes fluorinated oils and greases.73 500 CFC-11 = 1. non-conductive • Non-flammable • Low toxicity • Low Global Warming Potential • Formulated with 3M ™ Novec ™ 7200 Engineered Fluid which. C02 = 1.5 CFC-11 = 1. • Test on plastics before using – may is VOC-exempt under California Air Resources damage acrylics.GWP2 Hazardous Air Pollutant3 Exposure Guidelines (ppmV. Health and Safety Information Properties Ozone Depletion Potential .5 nPB 0.1 Low No 10 0. low global lead-free fluxes warming potential Environmental.0 Low Yes 10 0.0 GWP-100 year integration time horizon.03 122 No 50 2. light oils and silicones. dust and particulates from sensitive electrical and electronic equipment.8 None None 750 3 HCFC-141b 0.00 71 3.0 2 GWP-100 year integration time horizon.17.8 None 200 HCFC-141b 0. Health and Safety Information Properties Ozone Depletion Potential .ALT (years) Flashpoint Flammability Range in Air Exposure Guideline (ppmV.ODP1 Global Warming Potential . Health and Safety Information Properties Ozone Depletion Potential .1 Low No 10 0.S.10 725 No 500 25 MOS in use = HCFC-225ca 0. Health and Safety Information Properties Ozone Depletion Potential .10 725 No 500 25 0.GWP2 Atmospheric Lifetime .5 TCE 0.0 3M Novec Electronic Degreaser ™ ™ • Non-flammable. 8 hr time weighted average) 1 Novec Contact Cleaner 0.6 .GWP2 Hazardous Air Pollutant3 Exposure Guidelines (ppmV.0 Vol% by ASTM E681-94 @ 100°C 3M Novec Contact Cleaner Plus ™ ™ • Fast drying.ALT (years) Flashpoint Exposure Guideline (ppmV. C02 = 1.3 None 500 CFC-11 = 1. no residue • Non-ozone depleting. polycarbonates.0 As defined by the U.5 TCE 0. TWA) Margin of Safety (MOS)4 1 2 Novec Flux Remover 0. scratching. low profile 3M™ Bumpon™ Protective Products perform more reliably than high-profile. SJ6112. High profile allows better heat dissipation on electrical or electronic equipment. vulcanizing agent to chemically mar surfaces. Custom (Molded) Products Resilient Rollstock (Family) These are just a few examples of the many Bumpon products available for electronics assembly. separate from liner and • Resilient elastomer will not dry out. or embrittle. High coefficient of friction helps keep the computer in place. rivets. dry and smooth surfaces. Resilient Rollstock (Family) and Custom (Molded) Products SJ5302/SJ5402 (Clear or Colored). Customize with a choice of adhesives for secure adhesion to either low surface energy or high surface energy plastics. “bump it on” with no screws. SJ6344EZ (Black). pressure sensitive acrylic or rubber adhesives go on fast with just finger pressure. When you want a little touch of quiet and skid resistance for a PDA or other small product. sliding. Standard and Custom Shapes Take the edge off noise. Custom (Molded) Products SJ5744 (Black). 3M™ Bumpon™ Protective Products SJ5012 (Black). Durable. on most surfaces. or drying time. Wherever slamming. • Custom 3M™ Bumpon™ Protective Products expand the possibilities for shape. strips. Performance and savings are the same. Adhesive is formulated to hold even with a smaller bonding surface. Please consult your 3M representative for specific product recommendations and samples to evaluate in your application. Protective For feet on a monitor stand. custom shapes. 34 . because low profile better withstands the load and shear stress. Match the shape size and color to the application with off-the-shelf standards. • Easy to apply. • Pressure sensitive adhesives bond fast and • Contains no corrosive plasticizer or permanently when pressed to most clean. scuffing. buttons. color • High coefficient of friction resists skidding and applications beyond the standard line. nicking. or die-cuts from roll stock. noise indefinitely. glue mess. put an end to scratches. You have a choice of permanently resilient pads. vibration or noise could be a problem for your product – or make your product a problem – 3M™ Bumpon™ Protective Products provide a margin of safety. size. bumpers or spacers.Protective Products 3M™ Bumpon™ Protective Products. Saves time and money with no screw holes. Customized clear cushions made from 3M™ Bumpon™ Protective Product material blend with the laptop’s computer base. or rot. feet. custom 3M™ Bumpon™ Protective Products are scaled for the design. Resilient Rollstock (Family). cushions and damps application equipment. 3 3M™ Plastic Bonding Adhesive 3M™ Plastic Bonding Adhesive 3M Scotch-Weld Hot Melt Adhesives ™ ™ 3M™ Scotch-Weld™ Electronic Grade Epoxy 3M™ Scotch-Weld™ Electronic Grade Epoxy 3M Scotch-Weld Epoxy Adhesive ™ ™ 3M™ Scotch-Weld™ Hot Melt Adhesives 3M™ Scotch-Weld™ Epoxy Adhesive 3M™ Scotch-Weld™ Epoxy Adhesive 3M Scotch-Weld Epoxy Adhesive ™ ™ 3M™ Scotch-Weld™ Epoxy Adhesive 3M™ Scotch-Weld™ Epoxy Adhesive 3M™ Scotch-Weld™ Epoxy Adhesive Thermally Conductive Epoxy Thermally Conductive Epoxy DP-270 Clear/Black 3M™ Scotch-Weld™ Epoxy Adhesive 3M Scotch-Weld Epoxy Adhesive ™ ™ Cleaners Product # ™ ™ ™ ™ ™ ™ Greases Page 32-33 32-33 32-33 32-33 Product Description TCG-2031 TCG-2033 TCG-2035 TCG-2037 3M Thermally Conductive Grease ™ Description Page 2. 4 2. 4 2. 27 27 27 Product # DP-460 DP-460 EG DP-4XL EG DP-8005 DP-8010 DP-810 DP-810 Black TC-2707 TC-2810 Description 3M Scotch-Weld Epoxy Adhesive ™ ™ Page 27 27 27 27 27 27 27 2. 3 2. 4 3M Novec Contact Cleaner 3M Novec Contact Cleaner Plus 3M Novec Electronic Degreaser 3M™ Novec™ Flux Remover 3M™ Thermally Conductive Grease 3M Thermally Conductive Grease ™ 3M™ Thermally Conductive Grease Fasteners Product Description 3M Dual Lock Reclosable Fasteners ™ ™ Protective Page 31 31 Product Description 3M Bumpon Protective Products ™ ™ Page 34 3M™ Hook & Loop Fasteners 35 . 4 2. 3.Abrasives Product # 061X 254X 261X 262X 263X 266X 268X 281Q 286Q 291X 298X 452X 461X 462X 463X 464X 466X 468X 468XW 468XY 481Q 486Q 491X Description 3M Lapping Film ™ Page 29 29 29 29 29 29 29 30 30 30 30 29 29 29 29 29 29 29 29 29 30 30 30 Product # 562X 591X 598X 631X 641X 660XV 661X 661XA 661XU 662X 663X 664X 666XW 668X 863X 863XW 865X 869X 869XW 951M 958X 961M 968M Description 3M Lapping Film ™ Page 29 30 30 28 28 28 28 28 28 28 28 28 28 28 29 29 29 29 29 30 30 30 30 3M™ Lapping Film 3M Lapping Film ™ 3M™ Polishing Film 3M Polishing Film ™ 3M™ Lapping Film 3M™ Lapping Film 3M™ Lapping Film 3M Lapping Film ™ 3M™ Diamond Lapping Film 3M™ Diamond Lapping Film 3M™ Diamond Lapping Film 3M™ Diamond Lapping Film 3M™ Trizact™ Diamond Lapping Film 3M Diamond Lapping Film ™ 3M™ Wetordry™ Polishing Paper 3M Wetordry Polishing Paper ™ ™ 3M™ Polishing Film 3M™ Polishing Film 3M Lapping Film ™ 3M™ Diamond Lapping Film 3M™ Diamond Lapping Film 3M Diamond Lapping Film ™ 3M™ Lapping Film 3M™ Lapping Film 3M Lapping Film ™ 3M™ Diamond Lapping Film 3M™ Diamond Lapping Film 3M Lapping Film ™ 3M™ Lapping Film 3M™ Lapping Film 3M Lapping Film ™ 3M™ Lapping Film 3M™ Lapping Film 3M Lapping Film ™ 3M™ Lapping Film 3M™ Lapping Film 3M Wetordry Polishing Paper ™ ™ 3M™ Lapping Film 3M™ Polishing Film 3M Polishing Film ™ 3M™ Wetordry™ Polishing Paper 3M™ Polishing Film 3M™ Polishing Film 3M™ Polishing Film Adhesives Product # 2665 2669 2679B 3748 3748 VO DP-100 DP-100 Plus Clear DP-190 Gray DP-420 Description 3M Plastic Bonding Adhesive ™ Page 26 26 26 27 27 27 27 2. Tapes Product # 2A12 2A26 2A89 40 40PR 110P02 110P05 112P02 112P05 213 242F01 242F02 300PL 335 336 406 467MP 468MP 501FL 502FL 508SN 583 588 615 615R 615S 668 851 927 950 615R 615S 668 851 927 950 1115B 1120 1125 Description 3M™ Protective Tapes 3M Protective Tapes ™ ™ ™ Page 12 12 12 24 24 21 21 21 21 13 21 21 10 12 12 12 17 17 22 22 10 12 12 12 12 12 12 13 17 17 12 12 12 13 17 17 10 10 10 Product # 1126 1170 1181 1182 1183 1194 1245 1251 1254 1258 1267 1280 1345 1380 1614 2191FR 2245 2693 3130 3245 3305 3921 4611 4731 4737S 4737T 4941 4950 5363 5413 5414 5419 5433 5516 5516S 5557 5557NP 5558 5559 Description Copper Foil Aluminum Foil Copper Foil Copper Foil Copper Foil Copper Foil Embossed Foil 3M Clean Room Tapes ™ ™ Page 10 10 10 10 10 10 10 24 24 24 10 13 10 11 12 11 10 13 12 10 24 20 25 13 13 13 25 25 7 13 13 13 13 2. 4 23 23 23 23 3M Protective Tapes 3M Anti-Static Tapes 3M™ Anti-Static Tapes 3M™ Damping Polymers 3M Damping Polymers ™ ™ ™ 3M Damping Polymers 3M Damping Polymers High Temperature Tapes 3M Ultra-Pure Damping Polymers ™ ™ 3M Clean Room Tapes 3M™ Clean Room Tapes Embossed Foil High Temperature Tapes Embossed Foil EMI Shielding Sheets and Films 3M™ Protective Tapes Metalized Cloth Embossed Foil High Temperature Tapes 3M™ Protective Tapes Gaskets and Conductive Materials 3M Clean Room Tapes ™ 3M Ultra-Pure Damping Polymers Aluminum Foil Protective Tapes Protective Tapes 3M Bonding Films ™ ™ ™ 3M Adhesive Transfer Tapes 3M Adhesive Transfer Tapes Low Outgassing Tapes Low Outgassing Tapes Copper Foil Tape 3M Bonding Films ™ Performance Label Materials 3M™ VHB™ Tapes High Temperature Tapes High Temperature Tapes High Temperature Tapes 3M VHB Tapes ™ ™ 3M™ Bonding Films 3M™ Bonding Films 3M Bonding Films ™ ™ ™ 3M Bonding Films 3M Bonding Films High Temperature Tapes 3M™ Adhesive Transfer Tapes 3M Adhesive Transfer Tapes ™ ™ 3M™ VHB™ Tapes 3M™ Anisotropic Conductive Film (ACF) Adhesives High Temperature Tapes High Temperature Tapes High Temperature Tapes High Temperature Tapes Thermally Conductive Interface Pads Thermally Conductive Interface Pads Water Contact Indicator Tape Water Contact Indicator Tape Water Contact Indicator Tape Water Contact Indicator Tape 3M Bonding Films 3M™ Bonding Films 3M™ Bonding Films High Temperature Tapes 3M Adhesive Transfer Tapes ™ ™ 3M Adhesive Transfer Tapes Aluminum Foil Aluminum Foil Copper Foil 36 . 4 2. 4 2.Tapes Product # 5559i 5590H 5591 5591S 5592 5592S 5595 5595S 5589H 5770 5770NF 5771 5771NF 5772 5925 5952 5958FR 6035PC 6670 6692 7303 7313 7371 7373 7376-10 7376-20 7376-30 7378 7380 7381 7413T 7413TL 7419 7613 7730FL 7744FL 7772 7805 7810 7811-DMI 7812-TT 7815 7816 7818 7830N Description Water Contact Indicator Tape Thermally Conductive Interface Pads Thermally Conductive Interface Pads Thermally Conductive Interface Pads Thermally Conductive Interface Pads Thermally Conductive Interface Pads Thermally Conductive Interface Pads Thermally Conductive Interface Pads Thermally Conductive Interface Pads Performance Label Materials Performance Label Materials Performance Label Materials Performance Label Materials Performance Label Materials 3M™ VHB™ Tapes 3M VHB Tapes ™ ™ ™ ™ ™ Page 23 2. 7 6. 4 20 20 20 20 20 25 25 25 17 22 22 5 5 5 5 5 5 5 5 20 20 13 13 13 20 20 20 6. 4 4 2. 4 4 2. 3 17 3M Optically Clear Adhesive Tapes 3M Optically Clear Adhesive Tapes 3M™ Optically Clear Adhesive Tapes 3M Optically Clear Adhesive Tapes ™ ™ ™ 3M VHB Tapes 3M Adhesive Transfer Tapes Low Outgassing Tapes Low Outgassing Tapes 3M Anisotropic Conductive Film (ACF) Adhesives ™ ™ ™ 3M Optically Clear Adhesive Tapes 3M Optically Clear Adhesive Tapes 3M™ Optically Clear Adhesive Tapes 3M™ Optically Clear Adhesive Tapes 3M Optically Clear Adhesive Tapes ™ ™ ™ 3M Anisotropic Conductive Film (ACF) Adhesives 3M Anisotropic Conductive Film (ACF) Adhesives 3M™ Grounded Heat Sink Bonding Film 3M Anisotropic Conductive Film (ACF) Adhesives ™ ™ ™ 3M Optically Clear Adhesive Tapes 3M Optically Clear Adhesive Tapes 3M™ Optically Clear Adhesive Tapes 3M Optically Clear Adhesive Tapes ™ ™ ™ 3M Anisotropic Conductive Film (ACF) Adhesives 3M Anisotropic Conductive Film (ACF) Adhesives 3M™ Anisotropic Conductive Film (ACF) Adhesives Performance Label Materials Performance Label Materials High Temperature Tapes High Temperature Tapes High Temperature Tapes Performance Label Materials Performance Label Materials Performance Label Materials 3M™ Electrically Conductive Adhesive Transfer Tapes 3M™ Electrically Conductive Adhesive Transfer Tapes 3M Electrically Conductive Adhesive Transfer Tapes ™ 3M Optically Clear Adhesive Tapes 3M Optically Clear Adhesive Tapes 3M™ Optically Clear Adhesive Tapes 3M™ Optically Clear Adhesive Tapes 3M Optically Clear Adhesive Tapes ™ ™ ™ 3M Optically Clear Adhesive Tapes 3M Optically Clear Adhesive Tapes 3M™ Optically Clear Adhesive Tapes 3M Optically Clear Adhesive Tapes ™ ™ ™ 3M Optically Clear Adhesive Tapes 3M Optically Clear Adhesive Tapes Low Outgassing Tapes Low Outgassing Tapes 3M Ultra Transparent EMI Shielding Film ™ ™ Performance Label Materials Performance Label Materials Performance Label Materials Performance Label Materials Performance Label Materials Gaskets and Conductive Materials 3M Ultra Transparent EMI Shielding Film Thermally Conductive Interface Materials Thermally Conductive Interface Materials Thermally Conductive Interface Materials Thermally Conductive Interface Materials 3M Adhesive Transfer Tapes ™ 37 . 7 6. 3 2. 3 2. 3 2. 7 20 20 20 20 20 8 Product # 7847 7848 7866 7868 7871 7872 7875 7885 8000 8141A 8141KCL 8142KCL 8142A 8143KCL 8146-1 8146-2 8146-3 8146-4 8171CL 8172CL 8172P 8173D 8211 8212 8213 8214 8261 8262 8263 8264 8271 8271S 8272 8273 8273D 8274 8333 8439FL 8880-S3 8880-S7 8805 8810 8815 8820 9082 Description Performance Label Materials Performance Label Materials Performance Label Materials Performance Label Materials Performance Label Materials Performance Label Materials Performance Label Materials Performance Label Materials Performance Label Materials 3M™ Optically Clear Adhesive Tapes 3M™ Optically Clear Adhesive Tapes 3M Optically Clear Adhesive Tapes ™ ™ ™ Page 20 20 20 20 20 20 20 20 20 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 22 22 9 9 2. 4 4 2. 3 2. 3 2. 3 22 22 20 9 9 9 9 9 12 12 Product # AL-25BT AL-25DC AL-36FR AL-36NC AL-37BLK AL-40BLK AL-50BT AL-1010S AU-2190 CN 3190 CN 3490 CN 4490 CU-10S CU-35C CU-1010S ECG-7033 ECG-7053 ECG-7073 ECG-8035 ECG-8055 ECG-8075 F9460PC F9469PC F9473PC F9752PC F9755PC FM1542 FMO33202 FMO43702 FMV01202 FMV01402 FMV02 FMV22 FP0862 FVS14S OFM010N OFM03402 OFM03502 OFM2402 TM-670SA TM-671SA TM-672SA X-7001 Description Aluminum Foil Aluminum Foil Aluminum Foil with Polyester Film Aluminum Foil with Polyester Film Aluminum Foil with Polyester Film Aluminum Foil with Polyester Film Aluminum Foil EMI Shielding Sheets and Films Metalized Cloth Metalized Cloth Metalized Cloth Metalized Cloth EMI Shielding Sheets and Films Copper Foil EMI Shielding Sheets and Films Electrically Conductive Cushioning Gaskets Electrically Conductive Cushioning Gaskets Electrically Conductive Cushioning Gaskets Electrically Conductive Cushioning Gaskets Electrically Conductive Cushioning Gaskets Electrically Conductive Cushioning Gaskets 3M Adhesive Transfer Tapes ™ Page 10 10 10 10 10 10 10 11 11 11 11 11 11 10 11 8 8 8 8 8 8 17 17 17 17 17 20 20 20 20 20 20 20 20 12 20 20 20 20 2. 3 2. 3 2. 3 2. 3 11 3M Adhesive Transfer Tapes 3M Adhesive Transfer Tapes 3M™ Adhesive Transfer Tapes 3M™ Adhesive Transfer Tapes 3M Double Coated Tapes ™ ™ 3M Double Coated Tapes 3M™ Double Coated Tapes 3M™ Double Coated Tapes 3M Double Coated Tapes ™ ™ ™ 3M Double Coated Tapes 3M Anisotropic Conductive Film (ACF) Adhesives 3M™ Electrically Conductive Adhesive Transfer Tapes 3M™ Anisotropic Conductive Film (ACF) Adhesives 3M Electrically Conductive Adhesive Transfer Tapes ™ ™ 3M Electrically Conductive Adhesive Transfer Tapes 3M™ Electrically Conductive Adhesive Transfer Tapes 3M™ Electrically Conductive Adhesive Transfer Tapes 3M Electrically Conductive Adhesive Transfer Tapes ™ ™ ™ 3M Electrically Conductive Adhesive Transfer Tapes 3M Electrically Conductive Adhesive Transfer Tapes 3M™ Electrically Conductive Adhesive Transfer Tapes 3M™ Electrically Conductive Adhesive Transfer Tapes 3M Electrically Conductive Adhesive Transfer Tapes ™ 3M™ Adhesive Transfer Tapes 3M™ Adhesive Transfer Tapes 3M Adhesive Transfer Tapes ™ ™ 3M Double Coated Tapes ™ ™ 3M Adhesive Transfer Tapes Performance Label Materials Performance Label Materials Performance Label Materials Performance Label Materials Performance Label Materials Performance Label Materials Performance Label Materials Performance Label Materials Protective Tapes Performance Label Materials Performance Label Materials Performance Label Materials Performance Label Materials Thermally Conductive Interface Materials Thermally Conductive Interface Materials Thermally Conductive Interface Materials Metalized Cloth 3M Electrically Conductive Adhesive Transfer Tapes 3M™ Adhesive Transfer Tapes 3M™ Double Coated Tapes 3M Double Coated Tapes ™ Thermally Conductive Adhesive Transfer Tapes Thermally Conductive Adhesive Transfer Tapes Thermally Conductive Interface Materials Thermally Conductive Interface Materials 3M Double Coated Dual Liner Tapes ™ Low Outgassing Tapes Performance Label Materials EMI Absorbers AB5000R Series EMI Absorbers AB5000S Series EMI Absorbers AB6000 Series AB7000 Series AF-42 AF-111 EMI Absorbers EMI Absorbers 3M Bonding Films ™ ™ 3M Bonding Films 38 .Tapes Product # 9085 9453LE 9471LE 9472LE 9482PC 9485PC 9490LE 9492MP 9495LE 9495MP 9500PC 9690 9703 9703 9705 9705 9706 9707 9709 9709S 9709SL 9712 9713 9719 9723 9731 9764 9770 9783 9795 9882 9885 9889FR 9890 55106 55334 76991 AB5000 Series Description 3M™ Adhesive Transfer Tapes 3M Adhesive Transfer Tapes ™ ™ ™ Page 17 17 17 17 17 17 18 18 18 18 18 18 5 6 5 6 6 6 6 6 6 6 6 6 6 18 6 17 18 18 2. Notes 39 . Notes 40 . FasterAssembly Functionality More . 3M.com/it www.3M. Hookit. 3M MAKES NO OTHER WARRANTIES INCLUDING.com/dk www.com/ca www. to replace or repair the 3M product or refund the purchase price of the 3M product.com/de www.3M.3M.3M.com/converter www.3M. All rights reserved.com/il www.com/electronics www.com/ www.com/nz www. Scotch-Weld.3M.com/be www.3M.com/fi www.3M.3M.3m.kr www. Warranty.Sumitomo 3M Limited 3M Korea Limited 3M Malaysia Sdn. If this product is defective within the warranty period stated above. Used under license by 3M subsidiaries and affiliates.com/br ASIA PACIFIC 3M Asia Pacific Pte Ltd 3M Australia Pty. Limited Remedy.3M.Information or Sales Assistance Contact 3M for the experience of 100 years of solutions for your design and production challenges. you must evaluate it and determine if it is suitable for your intended application. incidental or consequential loss or damage arising from this 3M product. Issued: 5/10 7193HB 60-5002-0129-2 3M.com/electronics 1-866-599-4227 Please recycle. at 3M’s option.com/no www.com/tw www.3M.com/es www.com/ph www.3M.3M.com/ro www/3m. special. 3M Technologies (Singapore) P\L 3M Taiwan Limited 3M Thailand Limited 65-6450-8888 61-2-9833-5333 86-21-6275-3535 852-2806-6387 81-3-3709-8261 82-2-3771-4030 60-3-7806-3653 64-9-444-4760 63-2-813-3781 65-6454-8611 886-2-2704-9011 ext. You assume all risks and liability associated with such use. Berhad 3M New Zealand Limited 3M Philippines Inc.com/intl/my www. your exclusive remedy shall be. © 3M 2010.3M.com/uk SOUTH AMERICA Brazil 0800-0132333 www.3M. Krytox. 3M will not be liable for any indirect.3M. Inc.com/hu www.com/nl www. Dual Lock. are trademarks of 3M Company. Paul. . Ltd 3M China Limited 3M Hong Kong Limited Japan .3M. and OPTIMA.3M.3M.com/at www. Electronics Markets Materials Division 3M Center.3M.3M.com/ch www.3M. Building 225-3S-06 St.com/hk www. Trizact.mmm.3M.3M. Scotch.3M.com/se www. VHB. regardless of the legal theory asserted.co. Except where prohibited by law.3M.com/ch www.com/ie www.com/electronics www.com/th Important Notice: Before using this product.p.3M.3M. 3M Netherlands 3M Norway 3M Poland 3M Romania 3M Russia 3M Spain 3M Sweden 3M Switzerland 3M United Kingdom Phone Number 43-1-866860 32-2-7225111 420-2-61380111 45-43-480100 41-41-7994040 41-41-7993100 358-9-5252-1 33-1-30-316161 49-2131-140 36-1-270-7777 353-1-2803555 972-9-9561490 39-2-70351 31-71-5450450 47-63-847500 48-22-739-60-00 40-21-202-800 7-495-7847474 34-91-3216000 46-8-922100 41-1-7249090 44-870-6080-050 Website www.com/au www.com/cz www.com/electronics www.com/mx Phone Number Website Location EUROPE 3M Austria 3M Belgium 3M Czech Republic 3M Denmark 3M East 3M East (AG) 3M Finland 3M France 3M Germany 3M Hungary 3M Ireland 3M Israel 3M Italia S.jp www. 302 www. Printed in USA.com/fluids www.com/east www. Wetordry.3M. BUT NOT LIMITED TO. Limited Liability: 3M’s product warranty is stated in its Product Literature available upon request.3M/pl www.3M.3M.3M.A.com/ru www. 520 66-2-260-8577 ext.3M.3M. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Location NORTH AMERICA 3M USA Adhesives and Tapes Abrasives Die-cut Solutions Specialty Materials 3M Canada 3M Mexico 1-800-251-8634 Fax: 651-778-4244 1-866-599-4227 Fax: 1-800-852-4668 1-800-223-7427 Fax: 1-800-258-7511 1-800-810-8513 Fax: 1-800-810-8514 1-800-364-3577 519-451-2500 52-52-70-04-00 www.com/sg www.3M. MN 55144-1000 www.3M.co.3M. and Kapton are registered trademarks of DuPont. Novec.com/fr www. EFD is a registered trademark of EFD.