Carl ZeissCB/CFE/CFi Service Manual 00: 01: 02: 03: 04: 05: 06: 07: 08: 09: 10: 11: 12: 13: 14: 15: General Information Planar Tessar Distagon Makro-Planar Planar Distagon Tele-Superachromat F-Distagon Distagon Planar Makro-Planar Sonnar Sonnar Sonnar Sonnar-Superachromat Contents List 2,8/80 4,8/160 3,5/60 4/120 2,8/80 4/40 5,6/350 3,5/30 4/50 3,5/100 4/120 4/150 4/180 5,6/250 5,6/250 CB CB CB CB CFE CFE CFE CFi CFi CFi CFi CFi CFi CFi CFi Revision 0 March 1999 Carl Zeiss CB - CFE - CFi Lenses 29/97 33/97 07/98 06/99 15/99 01/00 09/00 10/00 03/01 04/01 Related Service Infos New lenses - CB 2.8/80, CB 3.5/60, CB 4.8/160 Preliminary spare part catalogue - CB 2.8/80 New tools - CB 2.8/80 and CB 4.8/160 New spare part catalogue - CB, CFE and CFi lenses Service Manual completed - CB, CFE and CFi lenses New CD-ROM - Version 1.2 New CD-ROM - Version 1.3 Service Policy - C lenses Modified shutter parts New CD-ROM - Version 2.0 Revision 3 January 2001 Carl Zeiss CB/CFE/CFi Service Manual Prefactory Note 00:0:01 This Service Manual comprises a spare parts catalogue, a tools catalogue, a repair instruction and a lubrication plan. Determinant for the availability of spare parts is the latest state effective of the spares price list, as may from time to time be established. The basic lens for lists and descriptions is the Planar 2,8/80 CB. The lists and descriptions of the remaining lenses are showing only the differences to the Planar 2,8/80 CB. That means: What you don’t find in the chapter of one lens you will find in the Planar 2,8/80 CB chapter. All repair descriptions deal with disassembly only. Assembling is therefore always carried out in the reverse order. Exceptions are mentioned by the text. Page numbering system 01:1:01 page number subchapter: 1=spare part list 2=tools list 3=repair instruction 4=lubrication plan chapter (ordinal number of a lens in the manual) Figure numbering system Fig. 01:1:01/1-1 reference number figure number page number Ordering numbers The spare parts and tools have 13-digit ordering numbers like ‘102165-0011-180’. There are two exceptions: Some parts have a format like ‘VHAB Code No. 50377’ which you will find in the remark column. Some parts have a format like ‘200 509’, then you will find ‘VHAB Spare Part No.’ in the remark column. Revisions and dates To make sure, that your Service Manual is always up to date every page has a Revision counter and a date field. On the next pages you will find the Index of Current Pages, that gives you an overview over the complete Service Manual and informs you what to do in case of changes. Revision 0 July 1999 Rev.Carl Zeiss Page No. Date 01:4:06 0 July 1999 01:4:07 0 July 1999 02:1:01 1 September 1999 02:1:02 1 September 1999 02:1:03 1 September 1999 02:1:04 1 September 1999 02:1:05 0 January 1999 02:1:06 0 January 1999 02:2:01 0 May 1999 02:3:01 0 July 1999 02:3:02 0 July 1999 03:1:01 0 January 1999 03:1:02 0 January 1999 03:1:03 0 January 1999 03:1:04 0 January 1999 03:2:01 0 May 1999 03:3:01 0 July 1999 03:3:02 0 July 1999 04:1:01 0 January 1999 04:1:02 0 January 1999 04:1:03 0 January 1999 04:1:04 0 January 1999 04:2:01 0 May 1999 04:3:01 0 July 1999 04:3:02 0 July 1999 05:1:01 0 January 1999 05:1:02 0 January 1999 05:1:03 0 January 1999 05:1:04 0 January 1999 05:1:05 0 January 1999 05:1:06 0 January 1999 05:2:01 0 May 1999 05:3:01 0 July 1999 05:3:02 0 July 1999 06:1:01 0 May 1999 06:1:02 0 January 1999 06:1:03 0 January 1999 06:1:04 0 January 1999 06:1:05 0 January 1999 06:1:06 0 January 1999 06:1:07 0 January 1999 06:1:08 0 January 1999 06:2:01 0 May 1999 06:3:01 0 July 1999 06:3:02 0 July 1999 07:1:01 0 March 2000 07:1:02 0 March 2000 07:3:01 0 March 2000 08:1:01 0 January 1999 Action exchange exchange exchange exchange Revision 3 December 2000 . Date Cont. Rev. List 0 March 1999 00:0:01 0 July 1999 00:0:02 3 December 2000 00:0:03 2 December 2000 01:1:01 0 January 1999 01:1:02 0 January 1999 01:1:03 0 January 1999 01:1:04 0 January 1999 01:1:05 0 January 1999 01:1:06 0 January 1999 01:1:07 0 January 1999 01:1:08 0 January 1999 01:1:09 0 May 1999 01:1:10 0 January 1999 01:1:11 1 December 2000 01:1:12 1 December 2000 01:1:13 0 January 1999 01:1:14 0 January 1999 01:1:15 0 January 1999 01:1:16 0 January 1999 01:2:01 0 May 1999 01:3:01 0 July 1999 01:3:02 0 July 1999 01:3:03 0 July 1999 01:3:04 0 July 1999 01:3:05 0 July 1999 01:3:06 0 July 1999 01:3:07 0 July 1999 01:3:08 0 July 1999 01:3:09 0 July 1999 01:3:10 0 July 1999 01:3:11 0 July 1999 01:3:12 0 July 1999 01:3:13 0 July 1999 01:3:14 0 July 1999 01:3:15 0 July 1999 01:3:16 1 January 2000 01:3:17 0 July 1999 01:3:18 0 July 1999 01:3:19 0 July 1999 01:3:20 0 July 1999 01:3:21 0 July 1999 01:3:22 0 July 1999 01:3:23 0 July 1999 01:4:01 0 July 1999 01:4:02 0 July 1999 01:4:03 0 July 1999 01:4:04 0 July 1999 01:4:05 0 July 1999 Action Index of Current Pages 00:0:02 CB/CFE/CFi Service Manual Page No. Carl Zeiss Page No. Rev. Rev. 14:1:03 1 14:1:04 1 14:2:01 0 14:3:01 0 14:3:02 0 15:1:01 0 15:1:02 0 15:3:01 0 Date March 2000 March 2000 May 1999 July 1999 July 1999 March 2000 March 2000 March 2000 Action Revision 2 December 2000 . 08:1:02 0 08:1:03 1 08:1:04 1 08:1:05 0 08:1:06 0 08:2:01 0 08:3:01 0 08:3:02 1 09:1:01 0 09:1:02 0 09:1:03 0 09:1:04 0 09:1:05 0 09:1:06 0 09:2:01 0 09:3:01 0 09:3:02 0 10:1:01 0 10:1:02 0 10:1:03 0 10:1:04 0 10:2:01 0 10:3:01 0 10:3:02 1 11:1:01 0 11:1:02 0 11:1:03 0 11:1:04 0 11:1:05 0 11:1:06 0 11:2:01 0 11:3:01 0 11:3:02 0 12:1:01 0 12:1:02 0 12:1:03 0 12:1:04 0 12:2:01 0 12:3:01 0 12:3:02 0 13:1:01 0 13:1:02 0 13:1:03 0 13:1:04 0 13:2:01 0 13:3:01 0 13:3:02 1 14:1:01 0 14:1:02 0 Date January 1999 March 2000 March 2000 January 1999 January 1999 May 1999 July 1999 March 2000 January 1999 January 1999 January 1999 January 1999 January 1999 January 1999 May 1999 July 1999 July 1999 May 1999 January 1999 January 1999 January 1999 May 1999 July 1999 March 2000 May 1999 January 1999 January 1999 January 1999 January 1999 January 1999 May 1999 July 1999 July 1999 January 1999 January 1999 January 1999 January 1999 May 1999 July 1999 July 1999 May 1999 January 1999 January 1999 January 1999 May 1999 July 1999 March 2000 May 1999 January 1999 Action Index of Current Pages 00:0:03 CB/CFE/CFi Service Manual Page No. Description 102165-0011-180 102165-0012-030 102212-8105-000 000000-1018-370 102212-0011-000 102212-0001-000 102212-8106-000 000000-1018-373 102212-0006-000 102212-0016-000 Front lens guard Engraved ring Snap ring Front lens element Front lens element Lens holding ring Front lens Rear lens element Rear lens element Rear lens Lens holding ring Rear lens guard 01:1:01 Remark VHAB Code No. 51643 replace it by the same type (without groove) replace it by the same type (with groove) replace it by the same type (without groove) replace it by the same type (with groove) VHAB Code No.8/80 CB Spare Part No. Pcs 1 2 3 4a 4b 5 6 7a 7b 8 9 10 1 1 1 1 1 1 1 1 1 1 1 1 Planar 2. 50377 Revision 0 January 1999 .Carl Zeiss Pos No. Planar 2.8/80 CB 5 6 01:1:02 3 10 2 4a/b 1 9 8 7a/b 4a 7a 4b marked with grooves 7b Revision 0 January 1999 . Carl Zeiss Pos No.8/80 CB Spare Part No. Description 000000-0069-933 102211-1059-000 102212-1058-000 102211-1542-000 100349-1539 010 109950-0389-000 109950-0623-000 109950-0390-000 102211-1177-000 000000-0098-765 102211-1057-000 102211-1056-000 102211-1522-000 000000-1008-959 Screw Holding disk Holding ring Grip ring Setting ring Spring for setting notch Ball Notched ring Clutch lever Screw Clutch spring Notch spring Notch knob Diaphragm clutch ring 01:1:03 Remark Revision 0 January 1999 . Pcs 1 2 3 4 5 6 7 8 9 10 11 12 13 14 4 1 1 1 1 1 1+1 1 1 2 1 1 1 1 Planar 2. 8/80 CB 10 9 6 5 4 3 2 1 7 8 10 11 12 7 13 14 01:1:04 Revision 0 January 1999 .Planar 2. 8/80 CB Spare Part No. riveted Stop down handle Countersunk screw Spring for stop down ring Revision 0 January 1999 .Carl Zeiss Pos No. 4a/b has to be exchanged together with shutter mount 5 6 7 8 9 10 11 12 13 1 1 1 1 1 1 1 2 1 109950-0378-000 102211-8620-000 109951-0042-000 109950-0626-000 000000-0088-208 102211-8675-000 102211-8553-000 000000-0190-005 102211-1829-000 Cover plate Flash housing Countersunk screw Nut Screw Flash contact. Description 102211-1054-000 000000-0400-789 102212-1744-010 000000-1033-343 000000-1033-344 Stop down ring Screw Depth of field ring Case + shutter mount Case + shutter mount 01:1:05 Remark replace it by the same type (lens elements without grooves) replace it by the same type (lens elements with grooves) Pos No. Pcs 1 2 3 4a 4b 1 3 1 1 1 Planar 2. Planar 2.8/80 CB 5 4a/b 01:1:06 3 2 1 6 8 10 9 7 11 13 12 Revision 0 January 1999 . 3a/b has to be exchanged together with case 4 5 6 7 8 9 10 3 2 2 1 1 1 1 000000-0096-457 000000-0088-598 102211-1068-000 102211-1067-000 102211-1910-000 109950-0334-000 102211-1062-000 Screw Screw Stop ring Intermediate telescope shaft Bracket Pinion for cocking shaft Cam Revision 0 January 1999 .8/80 CB Spare Part No. Description 102212-8602-000 102211-1037-000 000000-1033-343 000000-1033-344 Shutter unit Intermediate stop down ring Shutter mount + case Shutter mount + case 01:1:07 Remark replace it by the same type (lens elements without grooves) replace it by the same type (lens elements with grooves) Pos No. Pcs 1 2 3a 3b 1 1 1 1 Planar 2.Carl Zeiss Pos No. Planar 2.8/80 CB 01:1:08 4 3a/b 2 7 1 8 9 10 5 6 6 Revision 0 January 1999 . Carl Zeiss Pos No. Pcs 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 1 5 1 1 5 1 1 1 6+4 1 1 1 1 1 1 1 1 1 1 Planar 2,8/80 CB Spare Part No. Description 102211-1026-010 000000-0069-908 102211-1036-000 109950-0327-000 000000-0088-598 102211-8574-000 102211-1020-000 109950-0320-000 000000-0088-598 000000-1008-958 109950-0344-000 102211-1072-000 102212-8900-000 109950-0341-000 000000-1008-957 109950-0342-000 109950-0114-000 000000-0093-536 109950-0343-000 Focusing ring Screw Focusing grip ring Clamp ring Screw Focusing mount Bearing Guide bar Screw Bayonet plate Guide bar Light tunnel Contact dummy Holding plate Telescope shaft Latch Latch spring Screw Latch bearing screw 01:1:09 Remark Revision 0 May 1999 Planar 2,8/80 CB 11 10 8 9 5 01:1:10 12 7 6 5 4 3 13 2 1 14 16 19 17 18 15 Revision 0 January 1999 Carl Zeiss Pos No. Pcs 1 2 3 4 5 6 7a 7b 7c 8 9 10 11 12 13 14 15 16 17a 17b 18a 18b 19 20 21 22 23 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 2 1 Planar 2,8/80 CB Spare Part No. Description 109950-0611-000 109950-0702-000 109950-0703-000 109950-0370-000 109950-0619-000 109950-0617-000 109950-0614-000 109950-0615-000 109950-0616-000 000000-1026-076 102211-1515-000 109950-0369-000 109950-0007-000 109950-0624-000 109950-0368-000 109950-0363-000 109950-0037-000 109950-0064-XXX 000000-1008-960 000000-1109-777 109950-0371-000 000000-1109-776 109950-0707-000 000000-0093-536 109950-0004-000 109950-0013-000 109950-0734-000 Securing ring Cam ring Cocking ring Cocking ring spring Speed lever spring Speed lever screw Speed lever Speed lever Speed lever Cocking gear Drive spring 1 Drive Screw Bridge Drive spring 2 Spring for blade opening ring Closing spring Cocking shaft Spring for intermediate cocking gear Spring for intermediate cocking gear Intermediate cocking gear Intermediate cocking gear Retard gear train Screw Countersunk screw Cylinder head rivet Flash contact spring 01:1:11 Remark Selection stage III, 2 notches Selection stage II, 1 notch Selection stage without notch see repair instructions 16 selection stages (XXX=000...160, see repair instructions) replace it together with Pos. 18a (old version) replace it together with Pos. 18b (new version) replace it together with Pos. 17a (old version) replace it together with Pos. 17b (new version) Revision 1 December 2000 Planar 2.8/80 CB 15 14 01:1:12 13 12 11 10 9 8 5 4 3 18 a/b 2 19 1 21 20 17 a/b 6 7a/b/c 16 22 23 Revision 1 December 2000 . Pcs 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1 1 3 1 3 1 5 1 1 5 1 1 1 1 1 3 1 Planar 2. Description 109950-0362-000 109950-0365-000 109950-0361-000 109950-0604-000 109950-0032-000 109950-0854-000 109950-0348-000 109950-8024-000 000000-1033-458 109950-0815-000 109950-0358-000 109950-0705-000 109950-0704-000 109950-0042-000 000000-0069-975 000000-0093-538 109950-0364-000 Blade opening ring Blade Blade Tap screw Countersunk screw Blade cover disc Diaphragm blade Diaphragm disc Case Countersunk screw Base plate Blade ring Mount tube Stop plate Screw Screw Blade 01:1:13 Remark Revision 0 January 1999 .Carl Zeiss Pos No.8/80 CB Spare Part No. 8/80 CB 8 7 01:1:14 9 10 6 4 5 3 2 1 17 11 16 12 13 15 14 Revision 0 January 1999 .Planar 2. Carl Zeiss Pos No. Description 109950-0353-000 109950-0649-000 109950-0350-000 109950-0352-000 102211-1108-000 109950-0355-000 102211-8548-000 109950-0833-000 102211-8528-000 102211-1766-000 000000-1026-108 109950-0366-000 102211-1150-000 000000-0190-005 Fixing screw Collar screw Diaphragm lever Diaphram lever screw Diaphragm ring Securing ring Control ring Opening lever spring Securing ring 2 Override pawl spring Diaphragm spring Locking lever spring Locking pawl Countersunk screw 01:1:15 Remark Revision 0 January 1999 .8/80 CB Spare Part No. Pcs 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 1 1 1 1 1 1 1 1 1 1 1 1 2 Planar 2. 8/80 CB 8 7 01:1:16 9 6 5 4 3 2 1 10 11 12 13 14 Revision 0 January 1999 .Planar 2. Pcs Tool No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 V-2180 V-2223 000000-1033-916 109950-0716-000 109950-0723-000 109950-0724-000 109950-0722-000 109950-0718-000 109950-0715-000 109950-0719-000 109950-0713-000 109950-0750-000 109950-0688-000 109950-0721-000 109950-0725-000 109950-0726-000 102165-0000-901 102212-8105-901 102212-8106-901 Tools Former Tool No.Carl Zeiss Pos No. 1450/8 493 916 and 109950-0712-000 1450/8 385 614 1450/8 386 818 1450/8 386 821 1450/8 386 806 1450/8 385 638 1450/8 385 602 1450/8 385 641 1450/8 385 588 1450/8 416 115 1450/8 387 176 1450/8 386 795 1450/8 386 833 1450/8 386 845 - 01:2:01 Remark Description Measuring device for planartrueness and concentricity Standard gauge Diaphragm setting gauge with gauge pivot Grooved ring wrench for X-contact Cocking button Cocking and release key Cocking and release key Control pawl and retard gear train bending tool Locking lever adjuster Control lever latch bending tool Diaphragm setting key Auxiliary cam Centering pin Auxiliary ring Retard lever pin bending tool Retard lever pin bending tool Wrench for engraved ring Wrench for front element Wrench for rear element only for CFE and CFi lenses only for CFE and CFi lenses for repair with open shutter for adjustment of 1/15s for adjustment of 1/500s Revision 0 May 1999 . Please see repair instructions ”Exchange of drive spring 1”. Cock the shutter. It is recommended to change the drive spring 1 (Spare Part No. actuate stop-down handle. All other screws are screwed in without securing adhesive. After repair works check dimensions related to lens bayonet flange. V-2180). After any repair work a final inspection has to be done. The shutter blades and the diaphragm blades and their bearing points must be free of lubricant. diaphragm blades should move consistently and jerk-free. Check flash contact. 01:3:01/1 General instructions for repair works It is recommended to do a receipt inspection before starting repair works. Lubrication of shutter parts only according to ”Lubrication Plan”. For works at the printed circuit boards of the CFE lenses: to avoid damages of the IC’s from electostatic discharge observe the general instructions for ESD prevention. For maximum optical performance MTF equipment is recommended to use. Revision 0 July 1999 . Additional faults could be recognized and the appearance of the faults could give hints to consequential damages. V-2223). See instructions for standard gauge. rotate smoothly the diaphragm ring and check at the same time whether the diaphragm blades open easily. consistently and fully. Check functions with standard gauge (Tool No. Release stop-down handle. Close the diaphragm. Check lens adjustment with collimator. General instructions for repair works on the barrel Only screws with securing adhesive are mentioned in the text. planartrueness and concentricity (Tool No. 102211-1515-000) doing repair works on the shutter unit. The flash contact must be free of lubricant. diaphragm blades should open fully.Carl Zeiss General Repair Instruction 01:3:01 Fig. Check of shutter speed. 5x1.7 L2 Flange focal length (distance to film plane) A øCC A øD1 TH1 B L1 TH2 øD2 PL B Fig.05 26 ±0.02 0.9 ±0.02 0.015 0.02 0.05 26 ±0.9 ±0.015 0.3 65.02 PL Threads Version Planar Planar Tessar Tessar Makro-Planar Planar Planar Makro-Planar Sonnar Sonnar Sonnar 2.1 26 ±0.05 26 ±0.9 ±0.1 26 ±0.015 trapezoidal metric trapezoidal metric metric trapezoidal metric metric metric metric metric a (01:1:02) b (01:1:02) a (02:1:02) b (02:1:02) Threads metric trapezoidal TH1 M42x0.015 74.02 0. 01:3:02/1 Revision 0 July 1999 .7 TH2 M33.9 ±0.05 26 ±0.9 0.Carl Zeiss General Repair Instruction 01:3:02 Check of planartrueness.9 ±0.9 ±0.02 0.1 65.02 74.05 26 ±0.015 0.9 ±0.8/80 3.5x1.015 0. 31 31 68.8/160 4/120 2.015 74.015 0.02 74. and flange focal length Lens Flange L1 focal length 74.05 26 ±0.8 68.02 0.015 74.6 31 43.02 0.015 74. concentricity.05 26 ±0.9 ±0.6 57.015 0.5 TG33.5 80.02 0.02 0.5x0.1 41.8 65.6 33.015 0.9 ±0.015 0.5 D1 42.6/250 CB CB CB CB CB CFE CFi CFi CFi CFi CFi 0.02 0.015 74.8/80 4.9 ±0.02 L2 CC max.02 74.75 TG41.015 0.5/100 4/120 4/150 4/180 5.8/80 2.9 ±0.015 74.015 0.5 D2 33.1 26 ±0.05 26 ±0.015 74.8/160 4. 01 26.005 0.01 0.5 20.005 0.5 M33.6 B July 1999 cap ring L1 PL B Fig.9 ±0.1 M38x0.9 ±0.01 L3 L2 Flange focal length (distance to film plane) øCC A A ø38.9 ±0.5/30 4/50 CB CFE CFi CFi 26.9 ±0.9 ±0.5 32.9 36.4 20.01 38.01 26.01 0.5/60 4/40 3.05 L1 Repair Instruction 01:3:03 L2 max.005 0.05 74. 31.005 0.Carl Zeiss General Lens Flange focal length 74.01 26.9 ±0.05 74.6 49.4 L3 CC PL Distagon Distagon F-Distagon Distagon 3.6 0.9 ±0.9 ±0.6 31.5x0.005 0.5 ø33.05 74. 01:3:03/1 Revision 0 . 102212-8106-901 Revision 0 July 1999 . Tool No.Carl Zeiss General Repair Instruction 01:3:04 Cleaning and exchange of lens elements Use a suction lifter for removing of lens elements. Tool No. The following tools are necessary for dismounting and mounting of lens elements: Front lens element / Front lens • Unscrew engraved ring (snap ring is snapped in from the rear) • Unscrew front lens element • Unscrew lens holding ring • Remove front lens • Assembly is carried out in the reverse sequence analogously. The surface of the lens elements has to be cleaned before mounting. 102165-0000-901 102212-8105-901 Rear lens element / Rear lens • • • • Unscrew rear lens element Unscrew lens holding ring Remove rear lens Assembly is carried out in the reverse sequence analogously. and remove depth of field ring. Unscrew stop down handle.Carl Zeiss General Removal of shutter unit • • • • • • • • • • • • • Repair Instruction 01:3:05 Remove lens elements. Unscrew one countersunk screw (01:3:05/1-3). Unscrew 3 screws (01:3:05/1-1) of depth of field ring and one for grounding of flash contact (01:3:05/1-2). Release shutter. one cylinder head screw (01:3:05/4) and remove case. Unscrew 4 screws of holding disk (from the front). Unscrew 3 screws from the back (at the shining surface). Remove diaphragm clutch ring and notched ring. 01:3:05/1 Revision 0 July 1999 . Remove setting ring (mind the ball and spring of the notch). Remove spring and stop down ring. Assembly is carried out in the reverse sequence analogously (mind the ball in the setting ring). Remove shutter unit from the front. 1 2 3 1 1 4 Fig. Remove holding disk. 1450/8 385 614). Snap out light tunnel. Loosen 5 clamp screws around the focusing ring. Unscrew 5 screws (mind the different length of 2 and 3). 109950-0716-000. Former Tool No. Removal of flash socket • Snap out flash housing from the inside of depth of field ring with a wide screw driver. Remove focusing ring. • Unscrew nut with special tool (Tool No. For assembly. 1 2 3 1 Borehole 2 Intermediate cocking gear 3 Cocking shaft 4 Mark 5 Index 6 Spring for intermediate cocking gear 7 Spring suspension rivet 7 6 5 4 Fig. 01:3:06/1 Test planartrueness and concentricity after fixing of case. the nut has to be secured.Carl Zeiss General Repair Instruction 01:3:06 Recommendation: Mark position of cocking shaft before disassembly of cocking ring (otherwise index will be disoriented by ±1 tooth). Remove grip ring. Removal of bayonet plate and focusing ring • • • • • • • Release shutter. Revision 0 July 1999 . Remove focusing assembly by drawing it over the stop of the telescope shaft. • Push the bayonet plate over the bearing and fix the screws under axial pressure.Carl Zeiss General Exchange of telescope shaft: Repair Instruction 01:3:07 • Clinch the screw (01:3:07/1-1) from the outside after assembly. Mind the order. 80). 01:3:07/1 • Screw in (for example after cleaning) of focusing mount is possible in any thread (For focal lengths 40. 1 2 3 4 6 Fig. 60. 50. • Fix the clamp screws and mind the order (see section ”Adjustment of the focusing ring“). Revision 0 July 1999 . • Assembly is carried out in the reverse sequence analogously. 01:3:07/2 5 • Slip the focusing ring over the threaded ring and turn it clockwise until the stop. 1 Fig. • For assembly mind the position of the cam and the pinion. Turn away focusing ring by approx. Loosen 5 clamp screws. Set the focusing ring at ¥. 45° from the stop and secure by one clamp screw. Revision 0 // July 1999 . Turn the cam until the inner face of the pinion is in parallel to the outside and the face of the cam is at an angle of 40° towards the center line. 01:3:08/1 • Insert the telescope shaft and push it over the stop.Carl Zeiss General Repair Instruction 01:3:08 • Screw focusing assembly onto the case (all 5 screws have to be secured). Fig.. 40° Fig. Mind the right position of the notch of the telescope shaft. 01:3:08/2 Adjustment of the focusing ring • • • • Remove the focusing grip ring. • See ”Removal of bayonet plate and focusing ring”. Dismounting of Case • See ”Disassembly of shutter unit”. Dismount cocking ring with cocking ring spring. 01:3:09/1 2 Disassembly of shutter unit Exchange of blades and blade opening ring • • • • • • Dismount securing ring and cam ring. Remove speed lever spring. • Tighten all clamp screws (mind the order). • Loosen the clamp screw and turn focusing ring towards the ¥-stop. Dismount securing ring 1 and diaphragm ring.Carl Zeiss General Repair Instruction 01:3:09 • Adjust ¥ by turning the focusing ring. Exchange of shutter blades • Mind the sequence of inserting the shutter blades (view from camera bayonet). 1 ¥ Index on the focusing ring 5 4 3 Fig. Dismount securing ring 2 and control ring from the back of the shutter. Recommendation: Mark position of cocking pinion. Bent upwards Bent downwards Fig. 01:3:09/2 Revision 0 July 1999 . 4 5 3 Bore marks for inner diameter Special screw Fig. The baffle plate spring (01:3:10/3-1) has to latch (01:3:10/3-2) when the blades extend into the opening diameter at least for approx.2 .3 mm.3 mm 2 1 Fig. Assembly is carried out in the reverse sequence analogously. 0. 01:3:10/1 Fig. 109950-0688-000. Open diaphragm fully.2-0. • Remove blade opening ring. Unscrew screws of blade cover disc (3 standard screws. Repair Instruction 01:3:10 Exchange of diaphragm blades • • • • • Remove control pawl spring and diaphragm spring. • Test the function of the override latch at the control ring. 01:3:10/3 Fig. 1450/8 387 176) through the case into the plastic bush of the cocking pinion when tightening the screws of the base plate. 1 special screw). 01:3:10/2 1 2 • Insert centering pin (Tool No. Dismount diaphragm blades. 01:3:10/4 Revision 0 July 1999 .Carl Zeiss General Exchange of blade opening ring • Remove spring for blade opening ring from the front. Remove blade cover disc. 0. Former Tool No.0. Open shutter by twisting the blade ring. Dismount closing spring for blade ring. Dismount driving spring 1 from the front. Secured Secured Fig. Secure screws of mount tube and stop plate with two component adhesive. Dismount driving spring 2. Dismount drive. Assembly is carried out in the reverse sequence analogously. Dismount bridge. 01:3:11/1 Revision 0 July 1999 . Dismount speed lever Dismount mount tube. Dismount retard gear train (2 screws). Remove blade ring. intermediate cocking gear and spring for intermediate cocking gear.Carl Zeiss General Exchange of base plate • • • • • • • • • • • • Repair Instruction 01:3:11 See ”Exchange of blades and blade opening ring”. Dismount cocking pinion. • Insert (anyone of assortment) cocking shaft (01:3:12/1-4) in a way. (see: ”Recommendation: Mark position of cocking shaft. 11marked out on tool V-2223. • Spring for intermediate cocking gear has to rest against the spring suspension rivet (01:3:12/1-1). that the index (01:3:12/1-5) points to the center of intermediate cocking gear (clearance for one of the shutter blades). • Tension the shutter slowly by the gauge lever and make sure the cocking shaft starts to rotate before position No. 11. • Pre-cock intermediate cocking gear. • In case the cocking shaft starts to rotate later than No. until its boring (01:3:12/1-2) points to the center of the spring suspension rivet (01:3:12/1-1).”) 6 5 1 Spring suspension rivet 2 Borehole 3 Spring for intermediate cocking gear 4 Cocking shaft 5 Index 6 Intermediate cocking gear 1 2 3 4 Fig. select another shaft out of the assortment. 01:3:12/1 Revision 0 July 1999 .Carl Zeiss General Exchange of cocking shaft Repair Instruction 01:3:12 Special tools: V-2223 Standard gauge 109950-0721-000 Auxiliary ring Assortment of 16 different cocking shafts 109950-0064-XXX (XXX = 000-160) • Insert intermediate cocking gear (01:3:12/1-6) together with spring (01:3:12/1-3). 01:3:13/2 Revision 0 July 1999 . • In case of deviation: Bend locking lever (01:3:13/2-2) as required for the right engaging depth with the locking lever adjustment tool (A = Point of application for the locking lever adjuster). 1 A 2 3 4 5 1 Bridge 2 Locking lever 3 Nose of locking lever 4 Drive 5 Cocking ring min 0.5 mm. 01:3:13/1 Exchange of bridge Special Tools: 109950-0721-000 Auxiliary ring 109950-0715-000 Locking lever adjuster • When mounting the bridge (01:3:13/2-1). make sure that the nose (01:3:13/2-3) of the locking lever (01:3:13/2-2) suspended by the cocking ring (01:3:13/2-5) will fall it at the drive (01:3:13/2-4) by at least 0.5 mm Fig. 1 Drive spring 1 Fig. Pos. Hang in short leg at Pos.Carl Zeiss General Exchange of drive spring 1 Repair Instruction 01:3:13 It is recommended to change the drive spring 1 doing repair works on the shutter unit. 01:3:13/1-1. Lubricate well inside diameter of drive spring with Lubricant K. 5 mm 1 mm Fig. 01:3:14/1 Revision 0 July 1999 .Carl Zeiss General Checking of flash contact Repair Instruction 01:3:14 • In released position the opening width of contact must be 0. • The contact must close approx.5 mm. 1 mm before the shutter is fully opened. 0. 01:3:15/1 Revision 0 July 1999 .Carl Zeiss General Exchange of the retard gear train Repair Instruction 01:3:15 Special Tools: 109950-0726-000 Retard lever pin bending tool 109950-0725-000 Retard lever pin bending tool 109950-0718-000 Control pawl and retard gear train bending tool • Turn the blade ring (01:3:15/1-8) at the switch off hook for escapement 2 (01:3:15/1-2) towards the drive (01:3:15/1-9). • Fit the cam ring (must be fitted before the speeds can be checked). • Adjust control fin (01:3:15/1-5) of the escapement lever 2 in a way that the escapement 2 (01:3:15/1-2) touches the tube mount (01:3:15/1-6) when it is switched off. In case of deviation: Loosen both screws (01:3:15/1-1) (01:3:15/1-4) and revolve the retard gear train around screw (01:3:15/1-4). press slightly towards the center against the tube mount (01:3:15/1-6) and screw tight. 1/30 s + - 1 2 3 9 4 8 6 5 7 1 Screw 2 Escapement 2 3 Retard gear train 4 Screw (Revolving point) 5 Control fin for escapement 2 6 tube mount 7 Switch off hook 8 Blade ring 9 Drive Fig. • Check 1/30 s. • Fit in retard gear train (01:3:15/1-3). Towards tube mount Away from tube mount = = prolongation of time shortening of time • After adjustment. tighten both screws firmly. Carl Zeiss General Repair Instruction 01:3:16 • Check 1/125 s. The control fin (01:3:16/1-3) must rest against the center side of the control cam. In case of deviation: Adjust speed by bending the adjusting pin (01:3:16/1-1). that the retard lever is disengaged by the cam ring (01:3:16/2-2) and the drive can work without resistance. In case of deviation: Bend retard lever pin (01:3:16/2-1) to such a degree. Towards tube mount Away from tube mount = = shortening of time prolongation of time 2 3 1 + 1 Adjusting pin 2 Cam ring 3 Control fin 1/125 s Fig. 2 1 1 Retard lever pin 2 Cam ring 1/500 s Fig. 01:3:16/1 • Check 1/500 s. 01:3:16/2 Revision 1 January 2000 . if necessary adjust values by chiseling or filing the control cam. 1 Escapement 1 Engagement 1/3 . 01:3:17/3 free Fig. Revision 0 July 1999 . 01:3:17/4 2 • Check remaining shutter speeds.Carl Zeiss General Repair Instruction 01:3:17 • Check 1 s.2/3 + - 2 2 free Fig 01:3:17/1 Fig. In case of deviation: Bend tongue (01:3:17/3-1) for escapement 2 (01:3:17/3-2) as far as required. In case of deviation: Bend tongue (01:3:17/1-1) for escapement 1 (01:3:17/1-2) as far as required. 1 Escapement 1 Engagement 1/3 . 01:3:17/2 • Check 1/8 s and 1/15 s formed by escapement 2.2/3 + - 2 Fig. • Mind catch of escapement (01:3:17/2). • Mind catch of escapement (01:3:17/4). 26 ±0.63 13.8 62.Carl Zeiss General Shutter speed table Nominal speed Upper limit DIN 19015 Upper limit Carl Zeiss Nominal speed Lower limit Carl Zeiss Lower limit DIN 19015 Tolerance Carl Zeiss Tolerance DIN 19015 s ms ms ms ms ms EV EV 1 1231 1149 1000 871 812 1/2 616 574 500 435 406 1/4 308 287 250 218 203 1/8 154 144 125 109 102 Repair Instruction 01:3:18 1/15 76.8 6.34 1.43 ±0.95 15.24 17.3 27.97 7.3 ±0.9 31.69 1/125 1/250 9.6 12.2 25.4 50.95 1.2 ±0.35 5.86 1/500 2.26 2.67 2.63 1.68 3.91 3.8 1/30 38.9 71.34 4.81 6.5 54.62 8.4 1/60 19.5 35.45 Revision 0 July 1999 . correct by bending fin (01:3:19/1-3). the diaphragm opens fully after operating sequence. As long as the release knob of the camera is pressed the diaphragm blades stay closed at the preset position. • Mount auxiliary cam. • In this position.5 mm 1 Cocking ring 2 Control lever 3 Fin 4 Rivet 5 Control latch 5 Fig. the diaphragm will remain closed after operating sequence.Carl Zeiss Repair Instruction 01:3:19 Additional instructions for CFE and CFi type lenses The shutter blades and the diaphragm blades are opened when the shutter is cocked and the setting ring is in ”F-position”.5 mm and arrest it. 01:3:19/1 4 3 2 Revision 0 July 1999 . on control lever (01:3:19/1-2) comes to be positioned just before the peak point of the cam. • Using shutter speed setting from 1/500s to B. control latch (01:3:19/1-5) must fall in at the control lever by 0. • Using the F-setting. F-adjustment Special Tools: 109950-0750-000 Auxiliary cam Note! The shutter must be separated from the barrel. 1 0. • Turn cocking ring (01:3:19/1-1) until rivet (01:3:19/1-4). • If necessary. 0. Mount auxiliary cam Check shutter with standard gauge. Check that there is a clearance of 0.2 mm A Fig.Carl Zeiss Repair Instruction 01:3:20 Additional instructions for CFE and CFi type lenses Adjustment of diaphragm switch lever Special Tools: V-2223 Standard gauge 109950-0718-000 Control pawl and retard gear train bending tool 109950-0750-000 Auxiliary cam • • • • Select B-position. 01:3:20/1 Revision 0 July 1999 . B-position 1 1 Cocking ring 2 Diaphragm switch lever 2 0.1 – 0.2 mm between the diaphragm switch lever (01:3:20/1-2) and the cocking ring (01:3:20/1-1).1 . (A = Point of application for the control pawl and retard gear train bending tool). (B = Point of application for the control lever latch bending tool) F-position 1 free 1 Cocking ring 2 Diaphragm switch lever 2 B Fig. 01:3:21/1 A Revision 0 July 1999 .Carl Zeiss Repair Instruction 01:3:21 Additional instructions for CFE and CFi type lenses Special Tools: V-2223 Standard gauge 109950-0718-000 Control pawl and retard gear train bending tool 109950-0719-000 Control lever latch bending tool • Select F-position. Adjust if necessary. 5 marked out on gauge V-2223. • Mount auxiliary cam. • Adjust diaphragm switch lever (01:3:21/1-2) with the control pawl and retard gear train bending tool in a way that its nose does not touch the cocking ring (01:3:21/1-1). (A = Point of application for the control pawl and retard gear train bending tool) • Make sure the diaphragm opens up within position No. loosen the 3 screws (01:3:22/1-1) and reset the printed circuit board (01:3:22/1-2) accordingly. 203 or 205. 01:3:22/1 Revision 0 July 1999 . • Tighten the screws and recheck. • If not. 1 1 Screws 2 Printed circuit board 2 Fig. • Repeat until F-stop setting and camera display corresponds. • Make sure that the preset F-stop value corresponds (lens/camera body).Carl Zeiss Repair Instruction 01:3:22 Link to: VHABSTS Additional instructions for CFE type lenses Adjustment of circuit board position for F-stop indication • Mount the lens on a camera body 202. 2 mm is achieved by rotating the focusing mount parts (01:3:23/1-1) against each other.8/80 4/40 4/50 3.5 ±0.5/60 Repair Instruction 01:3:23 Mounting and dismounting of focusing mount Note! The threaded ring and the flange can be put together in any position.5 ±0. 01:3:23/1 Revision 0 July 1999 . 2 1 1 Focusing mount 2 Bearing ring 4.Carl Zeiss Focusing mount 102211-8574-000 Used for the following types: Planar Distagon Distagon Distagon 2. Make sure that the measurement 4.2 mm Fig. for only the ones tested by us can guarantee safe operation.Carl Zeiss General Lubrication Plan 01:4:01 Lubricants other than those given in the lubrication chart must not be used. Lubricant Lubricant K Lubricant L Lubricant M Lubricant N Lubricant P Lubricant R Lubricant S Lubricant T Lubricant Y Order No. HB-K HB-L HB-M HB-N HB-P HB-R HB-S HB-T HB-Y Revision 0 July 1999 . Shining grey gears have been lubricated in a special procedure already when being manufactured and therefore never require any further lubrication. Grease points of lubrication only slightly. Carl Zeiss General Lubrication Plan 01:4:02 Different types of telescope shafts Fig. 01:4:02/1 Fig. 01:4:02/2 Fig. 01:4:02/3 HB - K HB - L Fig. 01:4:02/4 Fig. 01:4:02/5 Fig. 01:4:02/6 Fig. 01:4:02/7 Revision 0 July 1999 Carl Zeiss General Lubrication Plan 01:4:03 Fig. 01:4:03/1 Fig. 01:4:03/2 HB - K HB - N HB - S Fig. 01:4:03/3 Fig. 01:4:03/4 Revision 0 July 1999 Carl Zeiss General Lubrication Plan 01:4:04 Fig. 01:4:04/1 Fig. 01:4:04/2 Fig. 01:4:04/3 Fig. 01:4:04/4 HB - K HB - M HB - Y Fig. 01:4:04/5 Revision 0 July 1999 Carl Zeiss General HB - K HB - M Lubrication Plan 01:4:05 Fig. 01:4:05/1 Fig. 01:4:05/2 Fig. 01:4:05/3 CB lenses Fig. 01:4:05/4 CFE/CFi lenses Fig. 01:4:05/5 Fig. 01:4:05/6 Revision 0 July 1999 50. 60 Fig. 01:4:06/2 focal length 80 focal length 100 Fig.T Fig. 01:4:06/3 HB . 01:4:06/4 Revision 0 July 1999 . 01:4:06/1 Fig.S HB .Carl Zeiss General focal length 30 Lubrication Plan 01:4:06 focal lengths 40. 01:4:07/4 Revision 0 July 1999 . 01:4:07/1 focal length 160 Fig. 01:4:07/2 HB .R Fig. 180 Lubrication Plan 01:4:07 focal length 150 Fig. 01:4:07/3 focal length 250 Fig.Carl Zeiss General focal lengths 120. 1 2 3 4 5 6 7 Tessar 4.Carl Zeiss Pos No.8/160 CB Spare Part No. 102165-0011-160 102165-0012-040 102165-1010-000 100349-8105-000 100349-0111-000 100349-0001-010 100349-8106-000 02:1:01 Pcs 1 1 1 1 1 1 1 Description Engraved ring Snap ring Bayonet Front lens element Lens holding ring Front lens Rear lens Element Remark Revision 1 September 1999 . Tessar 4.8/160 CB 7 02:1:02 6 5 3 2 1 4 Revision 1 September 1999 . 100349-8058-000 000000-0095-550 100349-1590-010 100349-1744-010 100349-8601-000 000000-1033-343 109950-0592-000 100349-1072-000 000000-0069-974 000000-1015-939 109950-0644-000 000000-0093-535 000000-1015-953 000000-1015-960 000000-1015-961 000000-1015-942 000000-0098-795 000000-1015-947 02:1:03 Pcs 1 1 1 1 1 1 1 1 5 1 1 4 1 1 1 1 2 1 Description Holding ring Roll pin Diaphragm clutch ring Depth of field ring Shutter unit Shutter mount + case Telescope bush Light tunnel Screw Bayonet plate Telescope shaft Screw Focusing mount Guide bar Guide bar Stop Screw M1.8/160 CB Spare Part No.5 Focusing ring Remark Revision 1 September 1999 .Carl Zeiss Pos No.7x1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Tessar 4. 8/160 CB 4 3 5 6 7 02:1:04 2 1 12 15 8 9 10 17 16 11 14 13 18 Revision 1 September 1999 .Tessar 4. 1 2 3 4 5 6 Tessar 4. 109950-0417-000 109950-0034-000 109950-0755-000 109950-0128-000 109950-0416-000 100349-8601-000 02:1:05 Pcs 1 3 1 1 1 1 Description Blade Opening Ring Blade Blade Blade Blade Cover Disc Shutter Unit Remark Revision 0 January 1999 .Carl Zeiss Pos No.8/160 CB Spare Part No. Tessar 4.8/160 CB 6 02:1:06 5 2 3 2 1 4 2 Revision 0 January 1999 . Pcs Tool No.Carl Zeiss Pos No. - 02:2:01 Remark Description Wrench for front element Wrench for rear element Revision 0 May 1999 . 1 2 1 1 102212-8105-901 102212-8106-901 Tessar 4.8/160 CB Former Tool No. Carl Zeiss Tessar 4.8/160 CB Repair Instruction 02:3:01 Fig. 02:3:01/1 Revision 0 July 1999 . In case of deviation: Dismount guide bar. 02:3:02/1 2 +0.5 mm A 1 2 3 Pos. Focusing mount 000000-1015-953 Used for the following type: • • • • Tessar 4.Carl Zeiss Recommendation: Repair Instruction 02:3:02 Mounting and dismounting of focusing mount Before dismounting the focusing mount mark the positions between the three parts. unscrew threaded ring and flange and screw them into the next thread.8/160 Screw together threaded ring (02:3:02/2-1) and flange (02:3:02/2-2) until face (Pos. 10° Fig. B 1 Threaded ring 2 Flange 3 Carrier Fig. ca. Mount one guide bar (turn the carrier to fit in the threads) and measure dimension A. B) is even. Fit in both parts into the carrier (02:3:02/2-3) according to 02:3:02/1 and screw in until the end. 02:3:02/2 Revision 0 July 1999 . 102165-0011-200 102165-1010-000 102165-0012-010 104940-0011-000 104852-0001-010 104869-0018-000 104852-0107-000 03:1:01 Pcs 1 1 1 1 1 1 1 Description Engraved ring Bayonet Snap ring Lens holding ring Front lens Lens holding ring Rear lens Remark Revision 0 January 1999 . 1 2 3 4 5 6 7 Distagon 3.Carl Zeiss Pos No.5/60 CB Spare Part No. 5/60 CB 03:1:02 5 4 7 6 3 2 1 Revision 0 January 1999 .Distagon 3. 1:1:16 has to be exchanged together with case Revision 0 January 1999 .Carl Zeiss Pos No.5/60 CB Spare Part No. 104940-8058-000 000000-0095-550 100349-1539-010 104940-1590-010 104940-1744-010 102212-8602-000 000000-1033-344 104940-1026-010 03:1:03 Pcs 1 1 1 1 1 1 1 1 Description Holding ring Roll pin Setting ring Diaphragm clutch ring Depth of field ring Shutter unit Shutter mount + case Focusing ring Remark Details: look at 1:1:11 . 1 2 3 4 5 6 7 8 Distagon 3. 5/60 CB 6 7 03:1:04 5 4 3 8 2 1 Revision 0 January 1999 .Distagon 3. 1 2 3 1 1 1 000000-1054-350 000000-1054-351 000000-1054-352 Distagon 3. 104869-8005-905 104869-8006-902 104869-8007-902 03:2:01 Remark Description Wrench for front element Wrench for center element Wrench for rear element Revision 0 May 1999 . Pcs Tool No.Carl Zeiss Pos No.5/60 CB Former Tool No. Carl Zeiss Distagon 3,5/60 CB Repair Instruction 03:3:01 Fig. 03:3:01/1 Revision 0 July 1999 Carl Zeiss Focusing mount 102211-8574-000 Used for the following types: Distagon Distagon Distagon Planar 3,5/60 4/40 4/50 2,8/80 Repair Instruction 03:3:02 Mounting and dismounting of focusing mount Note! The threaded ring and the flange can be put together in any position. Make sure that the measurement 4.5 ±0.2 mm is achieved by rotating the focusing mount parts (03:3:02/1-1) against each other. 2 1 1 Focusing mount 2 Bearing ring 4.5 ±0.2 mm Fig. 03:3:02/1 Revision 0 July 1999 Carl Zeiss Pos No. 1 2 3 4 5 6 7 8 Makro-Planar 4/120 CB Spare Part No. 102165-0011-310 107836-0016-000 000000-1004-983 107836-0011-000 107836-0001-000 000000-1005-010 107836-0006-000 107836-0015-000 04:1:01 Pcs 1 1 1 1 1 1 1 1 Description Engraved ring Snap ring Front lens element Lens holding ring Front lens Rear lens element Rear lens Lens holding ring Remark Revision 0 January 1999 Makro-Planar 4/120 CB 4 5 04:1:02 8 2 7 1 3 6 Revision 0 January 1999 . Carl Zeiss Pos No. Stop Screw Focusing ring Remark Details: look at 2:1:5 . compl.2:1:6 has to be exchanged together with case Revision 0 January 1999 . 000000-1034-202 000000-1034-206 100349-8601-000 000000-1033-344 109950-0592-000 000000-1034-203 000000-0069-974 000000-1015-939 109950-0644-000 000000-0093-535 000000-1034-207 000000-1034-208 000000-1034-209 000000-1034-204 000000-0098-795 000000-1034-205 04:1:03 Pcs 1 1 1 1 1 1 5 1 1 4 1 1 1 1 2 1 Description Diaphragm clutch ring Depth of field ring Shutter unit Shutter mount + case Telescope bush Light tunnel Screw Bayonet plate Telescope shaft Screw Guide bar Guide bar Focusing mount. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Makro-Planar 4/120 CB Spare Part No. Makro-Planar 4/120 CB 3 4 04:1:04 5 10 2 1 6 7 8 9 14 15 12 11 13 16 Revision 0 January 1999 . 1 2 1 1 000000-1054-355 000000-1054-356 Makro-Planar 4/120 CB Former Tool No. Pcs Tool No. 107836-8004-906 107836-8005-906 04:2:01 Remark Description Wrench for front element Wrench for rear element Revision 0 May 1999 .Carl Zeiss Pos No. 04:3:01/1 Revision 0 July 1999 .Carl Zeiss Makro-Planar 4/120 CB Repair Instruction 04:3:01 Fig. B) is even. B 1 Threaded ring 2 Flange 3 Carrier Fig.Carl Zeiss Recommendation: Repair Instruction 04:3:02 Mounting and dismounting of focusing mount Before dismounting the focusing mount mark the positions between the three parts. In case of deviation: Dismount guide bar. 04:3:02/1 2 +0. Mount one guide bar (turn the carrier to fit in the threads) and measure dimension A.5 mm A 1 2 3 Pos. 04:3:02/2 Revision 0 July 1999 . unscrew threaded ring and flange and screw them into the next thread. = or one thread Fig. Fit in both parts into the carrier (04:3:02/2-3) according to 04:3:02/1 and screw in until the end. Focusing mount 000000-1034-209 Used for the following types: Makro-Planar Sonnar 4/120 4/180 • • • • Screw together threaded ring (04:3:02/2-1) and flange (04:3:02/2-2) until face (Pos. 1 2 3 4 5 6 7 8 Planar 2.Carl Zeiss Pos No. 102165-0011-180 102165-0012-030 102210-0014-000 102076-0101-000 102210-8005-000 102210-8006-000 102076-0107-000 102210-0019-000 05:1:01 Remark Pcs 1 1 1 1 1 1 1 1 Description Engraved ring Snap ring Lens holding ring Front lens Front lens element Rear lens element Rear lens Lens holding ring Revision 0 January 1999 .8/80 CFE Spare Part No. Planar 2.8/80 CFE 7 05:1:02 8 6 4 3 2 1 5 Revision 0 January 1999 . Carl Zeiss Pos No. 1 2 3 4 5 6 7 8 9 10 11 12 Planar 2. Revision 0 January 1999 .8/80 CFE Spare Part No. 000000-1034-425 000000-1034-426 000000-1034-427 102211-1590-010 000000-1034-428 000000-1034-432 000000-1034-433 000000-1034-434 000000-1034-429 000000-1034-431 200 509 000000-0093-535 05:1:03 Remark Pcs 1 1 1 1 1 1 1 1 1 3 1 3 Description Holding ring Setting ring F-knob Diaphragm clutch ring Depth of field ring Case + shutter mount Shutter unit Contact finger plate Contact finger for stop down Spacer bolt Printed circuit board Screw has to be exchanged together with shutter mount VHAB Spare Part No. 8/80 CFE 8 7 05:1:04 12 6 11 5 10 4 1 3 2 9 1 Revision 0 January 1999 .Planar 2. 109950-0652-000 000000-0007-701 109950-0651-000 109950-8050-000 109950-0706-000 102211-8551-000 109950-8049-000 000000-0064-668 109950-8048-000 109950-0650-000 05:1:05 Remark Pcs 1 1 1 1 1 1 1 2 1 1 Description Diaphragm switch lever Locking washer Control pawl spring Control pawl.8/80 CFE Spare Part No. riveted Base plate Case.and control lever spring Revision 0 January 1999 .Carl Zeiss Pos No. riveted Locking washer F-locking lever F. riveted Control lever. 1 2 3 4 5 6 7 8 9 10 Planar 2. 8/80 CFE 8 7 10 05:1:06 6 5 9 4 3 2 1 Revision 0 January 1999 .Planar 2. Carl Zeiss Pos No. Pcs Tool No. 1 2 1 1 000000-1054-353 102210-8006-902 Planar 2.8/80 CFE Former Tool No. 102210-8005-901 - 05:2:01 Remark Description Wrench for front element Wrench for rear element Revision 0 May 1999 . Carl Zeiss Planar 2.8/80 CFE Repair Instruction 05:3:01 Fig. 05:3:01/1 Revision 0 July 1999 . 2 mm is achieved by rotating the focusing mount parts (05:3:02/1-1) against each other.5 ±0. 2 1 1 Focusing mount 2 Bearing ring 4.Carl Zeiss Focusing mount 102211-8574-000 Used for the following types: Planar Distagon Distagon Distagon 2.8/80 4/40 4/50 3.2 mm Fig.5/60 Repair Instruction 05:3:02 Mounting and dismounting of focusing mount Note! The threaded ring and the flange can be put together in any position. Make sure that the measurement 4. 05:3:02/1 Revision 0 July 1999 .5 ±0. 1 2 3 4 5 6 7 Distagon 4/40 CFE Spare Part No. 51654 Pcs 1 4 1 1 1 1 1 Description Front lens guard Screw Grooved ring Engraved ring Front lens Lens holding ring Rear lens Revision 0 May 1999 . 000000-0088-598 109950-0667-000 104878-0016-020 104878-0001-000 104878-0027-000 104878-0011-000 06:1:01 Remark VHAB Code No.Carl Zeiss Pos No. Distagon 4/40 CFE 5 4 06:1:02 3 7 2 1 6 Revision 0 January 1999 . 000000-0093-535 000000-1034-672 109950-0466-000 109950-0468-000 000000-0004-810 109950-0464-000 000000-1034-673 000000-0093-538 102211-1542-000 000000-1034-678 000000-0007-054 109950-0462-000 109951-0042-000 000000-1034-674 000000-0007-290 000000-0007-238 06:1:03 Remark Description Screw Tube Bearing Pressure spring Ball Grooved ring Index ring Screw Focusing grip ring Thread flange. Pcs 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 3 1 1 3 3 1 1 3 1 1 3 1 3 3 1 1 Distagon 4/40 CFE Spare Part No.Carl Zeiss Pos No. fitted Threaded pin Retaining ring Screw Stop screw Notched cylinder pin Notched cylinder pin Revision 0 January 1999 . Distagon 4/40 CFE 06:1:04 10 14 13 12 11 15 16 9 8 7 6 5 4 3 2 1 Revision 0 January 1999 . Carl Zeiss Pos No. riveted Setting ring F-knob Diaphragm clutch ring Depth of field ring Case + shutter mount Shutter unit Shutter mount + case Focusing ring Telescope shaft Bayonet plate Contact finger for stop down Contact finger plate Spacer bolt Printed circuit board Screw has to be exchanged together with shutter mount has to be exchanged together with case VHAB Spare Part No. 000000-1034-668 107882-8560-000 000000-1034-426 000000-1034-427 000000-1034-669 000000-1034-670 000000-1034-793 000000-1034-675 000000-1034-793 000000-1034-671 000000-1042-424 000000-1042-423 000000-1034-429 000000-1034-676 000000-1034-431 200 502 000000-0093-535 06:1:05 Remark Pcs 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 1 Description Holding ring Snap in spring. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Distagon 4/40 CFE Spare Part No. Revision 0 January 1999 . Distagon 4/40 CFE 6 5 4 7 06:1:06 17 14 3 13 2 1 16 15 12 11 10 9 8 Revision 0 January 1999 . and control lever spring Revision 0 January 1999 . riveted Base plate Shutter blade Case. riveted Control lever. riveted Locking washer F-locking lever F.Carl Zeiss Pos No. 109950-0652-000 000000-0007-701 109950-0651-000 109950-8050-000 109950-0706-000 109950-8055-000 102211-8551-000 109950-8049-000 000000-0064-668 109950-8048-000 109950-0650-000 06:1:07 Remark Pcs 1 1 1 1 1 5 1 1 2 1 1 Description Diaphragm switch lever Locking washer Control pawl spring Control pawl. 1 2 3 4 5 6 7 8 9 10 11 Distagon 4/40 CFE Spare Part No. Distagon 4/40 CFE 9 8 7 06:1:08 11 9 10 6 5 4 3 2 1 Revision 0 January 1999 . - 06:2:01 Remark Description Wrench for front element Wrench for center element Wrench for rear element Wrench for retaining ring Revision 0 May 1999 .Carl Zeiss Pos No. Pcs Tool No. 1 2 3 4 1 1 1 1 104878-8005-907 104878-8006-913 000000-1030-049 104878-8007-901 Distagon 4/40 CFE Former Tool No. 06:3:01/1 Revision 0 July 1999 .Carl Zeiss Distagon 4/40 CFE Repair Instruction 06:3:01 Fig. Carl Zeiss Focusing mount 102211-8574-000 Used for the following types: Distagon Distagon Distagon Planar 4/40 4/50 3. 2 1 1 Focusing mount 2 Bearing ring 4.2 mm is achieved by rotating the focusing mount parts (06:3:02/1-1) against each other.8/80 Repair Instruction 06:3:02 Mounting and dismounting of focusing mount Note! The threaded ring and the flange can be put together in any position.2 mm Fig. Make sure that the measurement 4. 06:3:02/1 Revision 0 July 1999 .5 ±0.5 ±0.5/60 2. (not figured) (not figured) Revision 0 March 2000 . VHAB Spare Part No. Description Front lens guard Rubber knob Focusing grip ring Tripod plate Screw Screw Light tunnel 07:1:01 Remark VHAB Code No.6/350 CFE Spare Part No. 51654 (not figured) VHAB Spare Part No. Pcs 1 2 3 4 5 6 7 1 2 1 1 2 4 1 104549-1037-000 104549-1036-000 30 763 829 755 829 790 100349-1072-000 Tele-Superachromat 5. (not figured) VHAB Spare Part No.Carl Zeiss Pos No. 6/350 ∗ 7 Nr 0000000 5 4 6 Revision 0 March 2000 .Tele-Superachromat 5.6/350 CFE 07:1:02 2 3 Carl Zeiss Tele-Superachromat 5. In case of damage please send the complete lens to: Carl Zeiss D-73446 Oberkochen Revision 0 March 2000 .Carl Zeiss Repair Instruction 07:3:01 Tele-Superachromat 5. Repair works may not be carried out with the exception of the replacement of the parts mentioned in the spare part list of this lens.6/350 ∗ Nr 0000000 Fig. 07:3:01/1 Each lens has been adjusted individually.6/350 CFE Carl Zeiss Tele-Superachromat 5. Carl Zeiss Pos No. 1 2 3 4 5 6 7 7 7 7 8 9 10 11 F-Distagon 3. 50709 Pcs 1 1 1 1 1 1 1 1 1 1 1 4 1 1 Description Front lens guard Lens holding ring Front lens Washer Screw Washer Neutral glass Filter Or 57 Filter Y 50 Filter B 11 Flange Screw Lens holding ring Rear lens Revision 0 January 1999 . 104877-0012-010 104813-0101-010 104813-0039-000 000000-0069-911 104877-0011-000 104813-8010-000 104813-8011-000 104813-8012-000 104813-8013-000 000000-1010-224 000000-0089-029 101025-0217-000 104813-0008-000 08:1:01 Remark VHAB Code No.5/30 CFi Spare Part No. 5/30 CFi 5 4 6 7 8 9 08:1:02 3 2 1 10 11 Revision 0 January 1999 .F-Distagon 3. 3 replace it by the same type (cheese head screw) replace it by the same type (countersunk screw) replace it by the same type (for cheese head screws) replace it by the same type (for countersunk screws) Revision 1 March 2000 . 14 Pcs 4 1 1 1 3 1 1 1 1 1 2 1 1 1 4 4 1 1 4 1 1 1 1 Description Screw Bayonet ring Threaded ring Rubber ring Screw Index ring Spring Lever Cylinder pin Ring Screw Stop Cylinder pin Tube Screw Screw Holding ring Holding ring Screw Snap in spring Ball Flat spring Screw has to be exchanged together with Pos No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15a 15b 16a 16b 17 18 19 20 21 F-Distagon 3.Carl Zeiss Pos No. 000000-0069-908 109950-0503-000 000000-1038-875 000000-1038-864 000000-0098-468 000000-1038-863 109950-0498-000 109950-0497-000 000000-0007-283 000000-1038-865 000000-0069-911 109950-0501-000 000000-0050-208 109950-0494-000 000000-0069-933 000000-1099-929 000000-1038-866 000000-1099-917 000000-0069-933 107882-8560-000 000000-0004-814 109950-0502-000 000000-0069-921 08:1:03 Remark has to be exchanged together with Pos No.5/30 CFi Spare Part No. F-Distagon 3.5/30 CFi 14 13 11 10 9 8 7 6 5 12 17 16a/b 15a/b 18 08:1:04 4 3 2 1 19 20 21 Revision 1 March 2000 . Carl Zeiss Pos No.5/30 CFi Spare Part No. complete Screw Guide bar Guide bar Focusing ring Screw Stop has to be exchanged together with shutter mount Details: look at 06:1:07 . 000000-1034-426 000000-1034-427 000000-1038-867 000000-1038-868 000000-1034-793 000000-1034-675 000000-1034-793 109950-0594-000 000000-1038-869 000000-0069-974 000000-1015-939 000000-1026-109 000000-1038-871 000000-0093-535 000000-1038-872 000000-1038-873 000000-1038-874 000000-0098-795 109950-0481-000 08:1:05 Remark Pcs 1 1 1 1 1 1 1 1 1 5 1 1 1 4 1 1 1 2 1 Description Setting ring F-knob Diaphragm clutch ring Depth of field ring Case + shutter mount Shutter unit Shutter mount + case Telescope bush Light tunnel Screw Bayonet plate Telescope shaft Focusing mount. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 F-Distagon 3.06:1:08 has to be exchanged together with case Revision 0 January 1999 . 5/30 CFi 5 6 7 8 08:1:06 4 3 2 1 10 11 12 19 18 15 16 14 9 13 17 Revision 0 January 1999 .F-Distagon 3. 104813-8007-901 104877-8003-904 08:2:01 Remark Description Wrench for center element Wrench for rear element Revision 0 May 1999 .5/30 CFi Former Tool No.Carl Zeiss Pos No. 1 2 1 1 000000-1054-348 000000-1054-347 F-Distagon 3. Pcs Tool No. 08:3:01/1 Revision 0 July 1999 .Carl Zeiss F-Distagon 3.5/30 CFi Repair Instruction 08:3:01 Fig. • If dimension C = 17. • Mount one guide bar (turn the carrier to fit in the treads) and measure dimension A. 08:3:02/3 March 2000 . Focusing mount 000000-1038-871 Used for the following type: F-Distagon 3.15 ±0.3 ±0.05 mm.Carl Zeiss Recommendation: Repair Instruction 08:3:02 Mounting and dismounting of focusing mount Before dismounting the focusing mount mark the positions between the three parts.5/30 • Screw together threaded ring (08:3:02/1-1) and flange (08:3:02/1-2) until the total length is 33.0 mm – Fit in flange (08:3:02/1-2) according to 08:3:02/2.3 ±0. 33. unscrew flange (08:3:02/1-2) and screw it into the next thread. 08:3:02/1 ± one thread ± one thread Fig. 08:3:02/2 Revision 1 Fig. • In case of deviation: Dismount guide bar.5 mm 1 2 3 1 Threaded ring 2 Flange 3 Carrier C Fig. • Measure dimension C of flange (08:3:02/1-2).05 mm A 6.5 mm – Fit in flange (08:3:02/1-2) according to 08:3:02/3. • If dimension C = 20. Carl Zeiss Pos No. 1 2 3 4 5 6 7 8 Distagon 4/50 CFi Spare Part No. 102165-0011-370 104908-0022-000 104931-1010-000 000000-0083-974 000000-0069-940 104908-0011-000 104908-0001-010 104908-0023-000 09:1:01 Remark Pcs 1 1 1 3 3 1 1 1 Description Engraved ring Snap ring Bayonet Screw Washer Lens holding ring Front lens Transfer ring Revision 0 January 1999 . Distagon 4/50 CFi 7 6 4 5 8 09:1:02 3 2 1 Revision 0 January 1999 . 000000-1038-878 109950-0468-000 000000-0004-810 102211-1542-000 000000-0093-538 000000-1038-879 109950-0462-000 000000-0088-598 109950-0760-000 109951-0042-000 000000-1034-674 000000-0007-290 000000-0007-238 000000-1038-880 09:1:03 Remark Pcs 1 3 3 1 3 1 1 2 1 3 3 1 1 1 Description Intermediate ring Pressure spring Ball Grip ring Screw Index ring Fixing ring Screw Guide angle Screw Stop screw Pin Pin Threaded flange.Carl Zeiss Pos No. fitted Revision 0 January 1999 . 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Distagon 4/50 CFi Spare Part No. Distagon 4/50 CFi 9 8 7 10 09:1:04 11 12 13 6 5 4 2 1 3 14 Revision 0 January 1999 . 06:1:08 has to be exchanged together with case Revision 0 January 1999 . 1 2 3 4 5 6 7 8 9 10 11 12 13 Distagon 4/50 CFi Spare Part No. 000000-1034-668 107882-8560-000 000000-1034-426 000000-1034-427 000000-1038-881 000000-1038-882 000000-1034-793 000000-1034-675 000000-1034-793 000000-1038-883 000000-1038-884 000000-1038-885 000000-1038-886 09:1:05 Remark Pcs 1 1 1 1 1 1 1 1 1 1 1 1 1 Description Holding ring Snap in spring Setting ring F-knob Diaphragm ring Depth of field ring Case + shutter mount Shutter unit Shutter mount + case Focusing ring Bayonet plate Telescope shaft Intermediate telescope shaft has to be exchanged together with shutter mount Details: look at 06:1:07 .Carl Zeiss Pos No. Distagon 4/50 CFi 10 09:1:06 9 8 7 6 12 11 5 4 13 3 2 1 Revision 0 January 1999 . Pcs Tool No.Carl Zeiss Pos No. 1 2 3 4 1 1 1 1 000000-1037-017 104908-8003-907 000000-1054-349 104878-8007-901 Distagon 4/50 CFi Former Tool No. 104908-8105-901 - 09:2:01 Remark Description Wrench for front element Wrench for center element Wrench for rear element Wrench for retaining ring Revision 0 May 1999 . Carl Zeiss Distagon 4/50 CFi Repair Instruction 09:3:01 Fig. 09:3:01/1 Revision 0 July 1999 . Carl Zeiss Focusing mount 102211-8574-000 Used for the following types: Distagon Distagon Distagon Planar 4/50 4/40 3.2 mm is achieved by rotating the focusing mount parts (09:3:02/1-1) against each other. 09:3:02/1 Revision 0 July 1999 .2 mm Fig. 2 1 1 Focusing mount 2 Bearing ring 4.5/60 2.8/80 Repair Instruction 09:3:02 Mounting and dismounting of focusing mount Note! The threaded ring and the flange can be put together in any position.5 ±0. Make sure that the measurement 4.5 ±0. 000000-1010-362 102165-0012-030 102166-8105-000 102165-0014-000 102111-0001-000 000000-1010-366 102111-0105-000 102111-0020-000 10:1:01 Remark Pcs 1 1 1 1 1 1 1 1 Description Engraved ring Snap ring Front lens element Lens holding ring Front lens Rear lens element Rear lens Lens holding ring Revision 0 May 1999 .Carl Zeiss Pos No.5/100 CFi Spare Part No. 1 2 3 4 5 6 7 8 Planar 3. 5/100 CFi 10:1:02 6 8 7 3 2 1 5 4 Revision 0 January 1999 .Planar 3. complete Guide bar Screw Guide bar Focusing ring Screw Stop has to be exchanged together with shutter mount Details: look at 05:1:05 .Carl Zeiss Pos No.05:1:06 has to be exchanged together with case Revision 0 January 1999 . 000000-1034-425 000000-1034-426 000000-1034-427 000000-1038-867 000000-1038-951 000000-1034-793 000000-1034-433 000000-1034-793 109950-0594-000 000000-1038-869 000000-0069-974 000000-1015-939 109950-0806-000 000000-1038-952 000000-1038-872 000000-0093-535 000000-1038-873 000000-1038-874 000000-0098-795 109950-0481-000 10:1:03 Remark Pcs 1 1 1 1 1 1 1 1 1 1 5 1 1 1 1 4 1 1 2 1 Description Holding ring Setting ring F-knob Diaphragm clutch ring Depth of field ring Case + shutter mount Shutter unit Shutter mount + case Telescope bush Light tunnel Screw Bayonet plate Telescope shaft Focusing mount.5/100 CFi Spare Part No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Planar 3. 5/100 CFi 6 8 7 10:1:04 5 9 4 3 2 10 1 12 13 15 16 17 11 20 19 14 18 Revision 0 January 1999 .Planar 3. Carl Zeiss Pos No. 102166-8006-903 10:2:01 Remark Description Wrench for front element Wrench for rear element Revision 0 May 1999 . 1 2 1 1 102165-8005-906 000000-1054-354 Planar 3. Pcs Tool No.5/100 CFi Former Tool No. Carl Zeiss Planar 3. 10:3:01/1 Revision 0 July 1999 .5/100 CFi Repair Instruction 10:3:01 Fig. 05 mm A 4.05 mm. 10:3:02/1 Fig.Carl Zeiss Recommendation: Repair Instruction 10:3:02 Mounting and dismounting of focusing mount Before dismounting the focusing mount mark the positions between the three parts. 10:3:02/2 Revision 1 March 2000 .5 mm 1 2 3 1 Threaded ring 2 Flange 3 Carrier ± one thread Fig. 28 ±0. • In case of deviation: Dismount guide bar.5/100 • Screw together threaded ring (10:3:02/1-1) and flange (10:3:02/1-2) until the total length is 28 ±0.0 +0. • Fit in flange (10:3:02/1-2) according to 10:3:02/2. unscrew flange (10:3:02/1-2) and screw it into the next thread. Focusing mount 000000-1038-952 Used for the following type: Planar 3. • Mount one guide bar (turn the carrier to fit in the threads) and measure dimension A. 1 2 3 4 5 6 7 8 Makro-Planar 4/120 CFi Spare Part No.Carl Zeiss Pos No. 102165-0011-310 107836-0016-000 000000-1004-983 107836-0011-000 107836-0001-010 000000-1005-010 107836-0006-000 107836-0015-000 11:1:01 Pcs 1 1 1 1 1 1 1 1 Description Engraved ring Snap ring Front lens element Lens holding ring Front lens Rear lens element Rear lens Lens holding ring Remark Revision 0 May 1999 . Makro-Planar 4/120 CFi 11:1:02 6 8 7 3 2 1 5 4 Revision 0 January 1999 . 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Makro-Planar 4/120 CFi Spare Part No. complete Guide bar Guide bar Focusing ring Stop Screw Remark has to be exchanged together with shutter mount has to be exchanged together with case Revision 0 January 1999 .Carl Zeiss Pos No. 000000-1034-425 000000-1034-426 000000-1034-427 000000-1034-202 000000-1039-083 000000-1034-793 000000-1039-085 000000-1034-793 109950-0592-000 100349-1072-000 000000-0069-974 000000-1015-939 109950-0644-000 000000-0093-535 000000-1034-209 000000-1034-207 000000-1034-208 000000-1034-205 000000-1034-204 000000-0098-795 11:1:03 Pcs 1 1 1 1 1 1 1 1 1 1 5 1 1 4 1 1 1 1 1 2 Description Holding ring Setting ring F-knob Diaphragm clutch ring Depth of field ring Case + shutter mount Shutter unit Shutter mount + case Telescope bush Light tunnel Screw Bayonet plate Telescope shaft Screw Focusing mount. Makro-Planar 4/120 CFi 7 6 11:1:04 8 5 4 3 2 10 1 12 13 14 19 17 20 15 16 11 9 18 Revision 0 January 1999 . 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Makro-Planar 4/120 CFi Spare Part No. riveted Base plate Blade opening ring Blade Blade Blade Blade cover Case. 109950-0652-000 000000-0007-701 109950-0651-000 109950-8050-000 109950-0359-000 109950-0417-000 109950-0128-000 109950-0034-000 109950-0755-000 109950-0416-000 102211-8551-000 109950-8049-000 000000-0064-668 109950-8048-000 109950-0650-000 11:1:05 Pcs 1 1 1 1 1 1 1 3 1 1 1 1 1+1 1 1 Description Diaphragm switch lever Locking washer Control pawl spring Control pawl.Carl Zeiss Pos No. riveted Locking washer F-locking lever F.and control lever spring Remark Revision 0 January 1999 . riveted Control lever. Makro-Planar 4/120 CFi 11 11:1:06 10 9 8 7 12 13 14 15 6 13 5 4 2 1 3 Revision 0 January 1999 . 1 2 1 1 000000-1054-355 000000-1054-356 Makro-Planar 4/120 CFi Former Tool No. Pcs Tool No.Carl Zeiss Pos No. 107836-8004-906 107836-8005-906 11:2:01 Remark Description Wrench for front element Wrench for rear element Revision 0 May 1999 . 11:3:01/1 Revision 0 July 1999 .Carl Zeiss Makro-Planar 4/120 CFi Repair Instruction 11:3:01 Fig. unscrew threaded ring and flange and screw them into the next thread. 11:3:02/1 2 +0. Fit in both parts into the carrier (11:3:02/2-3) according to 11:3:02/1 and screw in until the end. Mount one guide bar (turn the carrier to fit in the threads) and measure dimension A. In case of deviation: Dismount guide bar. B 1 Threaded ring 2 Flange 3 Carrier Fig. 11:3:02/2 Revision 0 July 1999 . = or one thread Fig. B) is even.5 mm A 1 2 3 Pos. Focusing mount 000000-1034-209 Used for the following types: Makro-Planar Sonnar 4/120 4/180 • • • • Screw together threaded ring (11:3:02/2-1) and flange (11:3:02/2-2) until face (Pos.Carl Zeiss Recommendation: Repair Instruction 11:3:02 Mounting and dismounting of focusing mount Before dismounting the focusing mount mark the positions between the three parts. 1 2 3 4 5 6 7 8 9 Sonnar 4/150 CFi Spare Part No.Carl Zeiss Pos No. 102165-0011-355 107823-0012-020 102165-1010-000 101114-8005-000 101114-0014-000 101025-0301-000 000000-1010-397 101025-8121-010 101025-0217-000 12:1:01 Remark Pcs 1 1 1 1 1 1 1 1 1 Description Engraved ring Snap ring Bayonet Front lens element Lens holding ring Front lens Rear lens element Rear lens Lens holding ring Revision 0 January 1999 . Sonnar 4/150 CFi 12:1:02 7 9 8 4 3 2 1 6 5 Revision 0 January 1999 . complete Guide bar Screw Guide bar Focusing ring Screw Stop has to be exchanged together with shutter mount Details: look at 11:1:05 .Carl Zeiss Pos No. 000000-1039-114 107882-8560-000 000000-1034-426 000000-1034-427 000000-1039-115 000000-1039-116 000000-1034-793 000000-1039-085 000000-1034-793 109950-0581-000 100349-1072-000 000000-0069-974 000000-1015-939 109950-0582-000 000000-1039-118 000000-1039-119 000000-0093-535 000000-1039-120 000000-1039-121 000000-0098-795 000000-1015-942 12:1:03 Remark Pcs 1 1 1 1 1 1 1 1 1 1 1 5 1 1 1 1 4 1 1 2 1 Description Holding ring Snap in spring Setting ring F-knob Diaphragm clutch ring Depth of field ring Case + shutter mount Shutter unit Shutter mount + case Telescope bush Light tunnel Screw Bayonet plate Telescope shaft Focusing mount. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Sonnar 4/150 CFi Spare Part No.11:1:06 has to be exchanged together with case Revision 0 January 1999 . Sonnar 4/150 CFi 7 6 12:1:04 8 9 10 5 4 3 2 12 1 13 21 20 16 17 18 14 11 15 19 Revision 0 January 1999 . 1 2 1 1 101114-8005-902 101025-0000-924 Sonnar 4/150 CFi Former Tool No.Carl Zeiss Pos No. - 12:2:01 Remark Description Wrench for front element Wrench for rear element Revision 0 May 1999 . Pcs Tool No. Carl Zeiss Sonnar 4/150 CFi Repair Instruction 12:3:01 Fig. 12:3:01/1 Revision 0 July 1999 . = or one thread Fig. B 1 Threaded ring 2 Flange 3 Carrier Fig. Mount one guide bar (turn the carrier to fit in the threads) and measure dimension A. 12:3:02/1 2.5 mm A 1 2 3 Pos. In case of deviation: Dismount guide bar. unscrew threaded ring and flange and screw them into the next thread. Focusing mount 000000-1039-118 Used for the following type: • • • • Sonnar 4/150 Screw together threaded ring (12:3:02/2-1) and flange (12:3:02/2-2) until face (Pos.Carl Zeiss Recommendation: Repair Instruction 12:3:02 Mounting and dismounting of focusing mount Before dismounting the focusing mount mark the positions between the three parts. Fit in both parts into the carrier (12:3:02/2-3) according to 12:3:02/1 and screw in until the end.4 +0. B) is even. 12:3:02/2 Revision 0 July 1999 . 000000-1004-238 104532-1012-000 102165-1010-000 000000-1005-261 000000-1004-240 101128-0001-000 000000-1004-237 13:1:01 Remark Pcs 1 1 1 1 1 1 1 Description Engraved ring Holding ring Bayonet Front lens element Lens holding ring Front lens Rear lens element Revision 0 May 1999 . 1 2 3 4 5 6 7 Sonnar 4/180 CFi Spare Part No.Carl Zeiss Pos No. Sonnar 4/180 CFi 13:1:02 4 3 2 1 6 5 7 Revision 0 January 1999 . 000000-1039-212 107882-8560-000 000000-1034-426 000000-1034-427 000000-1039-115 000000-1039-213 000000-1039-214 109950-0429-000 000000-1039-085 000000-1039-214 109950-0592-000 100349-1072-000 000000-0069-974 000000-1015-939 109950-0644-000 000000-1034-209 000000-1034-207 000000-0093-535 000000-1034-208 000000-1039-215 000000-1039-216 000000-0098-795 13:1:03 Remark Pcs 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 1 1 1 2 Description Holding ring Snap in ring Setting ring F-knob Diaphragm clutch ring Depth of field ring Case + shutter mount Cover plate Shutter unit Shutter mount + case Telescope bush Light tunnel Screw Bayonet plate Telescope shaft Focusing mount.11:1:06 has to be exchanged together with case Revision 0 January 1999 . 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Sonnar 4/180 CFi Spare Part No. complete Guide bar Screw Guide bar Focusing ring Stop Screw has to be exchanged together with shutter mount Details: look at 11:1:05 .Carl Zeiss Pos No. Sonnar 4/180 CFi 7 6 13:1:04 9 8 10 11 5 4 3 2 12 1 14 15 13 21 22 18 17 19 16 20 Revision 0 January 1999 . Carl Zeiss Pos No. - 13:2:01 Remark Description Wrench for front element Wrench for rear element Wrench for engraved ring Wrench for holding ring Revision 0 May 1999 . Pcs Tool No. 1 2 3 4 1 1 1 1 101128-0000-901 101128-0000-902 101128-0016-901 104532-0000-901 Sonnar 4/180 CFi Former Tool No. 13:3:01/1 Revision 0 July 1999 .Carl Zeiss Sonnar 4/180 CFi Repair Instruction 13:3:01 Fig. Mount one guide bar (turn the carrier to fit in the threads) and measure dimension A. 13:3:02/2 Revision 1 March 2000 . unscrew threaded ring and flange and screw them into the next thread. B) is even.Carl Zeiss Recommendation: Repair Instruction 13:3:02 Mounting and dismounting of focusing mount Before dismounting the focusing mount mark the positions between the three parts. Focusing mount 000000-1034-209 Used for the following types: Sonnar Makro-Planar 4/180 4/120 • • • • Screw together threaded ring (13:3:02/2-1) and flange (13:3:02/2-2) until face (Pos. 13:3:02/1 2 +0. ± one thread Fig. Fit in both parts into the carrier (13:3:02/2-3) according to 13:3:02/1 and screw in until the end.5 mm A 1 2 3 Pos. In case of deviation: Dismount guide bar. B 1 Threaded ring 2 Flange 3 Carrier Fig. 000000-1003-569 102165-0012-010 102165-1010-000 000000-1003-529 000000-1003-051 101007-0101-000 101115-0014-000 000000-1003-535 101115-0013-000 101007-0304-010 14:1:01 Remark Pcs 1 1 1 1 1 1 1 1 1 1 Description Engraved ring Snap ring Bayonet Front lens element Lens holding ring Front lens Snap ring Rear lens element Lens holding ring Rear lens Revision 0 May 1999 .Carl Zeiss Pos No. 1 2 3 4 5 6 7 8 9 10 Sonnar 5.6/250 CFi Spare Part No. Sonnar 5.6/250 CFi 4 14:1:02 3 2 1 10 6 5 7 9 8 Revision 0 January 1999 . Carl Zeiss Pos No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Sonnar 5.6/250 CFi Spare Part No. 000000-1039-232 107882-8560-000 000000-1034-426 000000-1034-427 000000-1039-233 000000-1039-234 000000-1039-214 109950-0429-000 000000-1039-085 000000-1039-214 109950-0591-000 101137-1999-000 100349-1072-000 000000-0069-974 000000-1015-939 109950-0653-000 000000-0093-535 000000-1039-237 000000-1039-238 000000-1039-239 000000-1039-241 000000-1039-242 000000-0098-795 14:1:03 Remark Pcs 1 1 1 1 1 1 1 1 1 1 1 1 1 5 1 1 4 1 1 1 1 1 2 Description Holding ring Snap in spring Setting ring F-knob Diaphragm clutch ring Depth of field ring Case + shutter mount Cover plate Shutter unit Shutter mount + case Telescope bush Telescope bush extension Light tunnel Screw Bayonet plate Telescope shaft Screw Focusing mount.11:1:06 has to be exchanged together with case Revision 1 March 2000 . complete Guide bar Guide bar Focusing ring Stop Screw has to be exchanged together with shutter mount Details: look at 11:1:05 . Sonnar 5.6/250 CFi 7 6 9 8 10 12 11 14:1:04 5 4 3 2 1 15 16 22 23 19 20 17 13 14 18 21 Revision 1 March 2000 . Pcs Tool No. 101115-8001-901 - 14:2:01 Remark Description Wrench for front element Wrench for rear element Revision 0 May 1999 . 1 2 1 1 000000-1054-357 101115-8002-903 Sonnar 5.Carl Zeiss Pos No.6/250 CFi Former Tool No. Carl Zeiss Sonnar 5. 14:03:01/1 Revision 0 July 1999 .6/250 CFi Repair Instruction 14:3:01 Fig. 6/250 Screw together threaded ring (14:3:02/2-1) and flange (14:3:02/2-2) until face (Pos. In case of deviation: Dismount guide bar. B) is even. B 1 Threaded ring 2 Flange 3 Carrier Fig. unscrew threaded ring and flange and screw them into the next thread. Mount one guide bar (turn the carrier to fit in the threads) and measure dimension A.5 mm A 1 2 3 Pos. 14:3:02/2 Revision 0 July 1999 . 14:3:02/1 2 +0. Focusing mount 000000-1039-237 Used for the following type: • • • • Sonnar 5.Carl Zeiss Recommendation: Repair Instruction 14:3:02 Mounting and dismounting of focusing mount Before dismounting the focusing mount mark the positions between the three parts. ± one thread Fig. Fit in both parts into the carrier (14:3:02/2-3) according to 14:3:02/1 and screw in until the end. 6/250 CFi Spare Part No. Pcs 1 2 3 4 1 1 1 1 102165-1010-000 102165-0011-000 104552-1012-000 100349-1072-000 Sonnar-Superachromat 5.Carl Zeiss Pos No. Description Bayonet Ring Ring Light tunnel 15:1:01 Remark (not figured) Revision 0 March 2000 . 6/250 CFi 15:1:02 1 2 4 3 Carl Zeiss Superachromat 5.6/250 Revision 0 March 2000 .Sonnar-Superachromat 5. In case of damage please send the complete lens to: Carl Zeiss D-73446 Oberkochen Revision 0 March 2000 .6/250 CFi Carl Zeiss Superachromat 5. Repair works may not be carried out with the exception of the replacement of the parts mentioned in the spare part list of this lens.6/250 Fig. 15:3:01/1 Each lens has been adjusted individually.Carl Zeiss Repair Instruction 15:3:01 Sonnar-Superachromat 5.
Report "24375871 Hasselblad Zeiss Lenses Service Manual"