Normas estándar ISO relacionadas con inspección técnica1) Standards ISO 3977-8:2002 Gas turbines -- Procurement -- Part 8: Inspection, testing, installation and commissioning Edition: 1 | Stage: 90.60 | TC 192 ICS: 27.040 Document available as of: 2002-07-11 ISO 15463:2003 Petroleum and natural gas industries -- Field inspection of new casing, tubing and plain-end drill pipe Edition: 1 | Stage: 60.60 | TC 67/SC 5 ICS: 75.180.10 Document available as of: 2003-12-04 ISO 6406:2005 Gas cylinders -- Seamless steel gas cylinders -- Periodic inspection and testing Edition: 2 | Stage: 90.20 | TC 58/SC 4 ICS: 23.020.30 Document available as of: 2005-02-10 ISO 18413:2002 Hydraulic fluid power -- Cleanliness of parts and components -- Inspection document and principles related to contaminant collection, analysis and data reporting Edition: 1 | Stage: 90.20 | TC 131/SC 6 ICS: 23.100.60 Document available as of: 2002-10-10 ISO 10460:2005 Gas cylinders -- Welded carbon-steel gas cylinders -- Periodic inspection and testing Edition: 2 | Stage: 90.20 | TC 58/SC 4 ICS: 23.020.30 Document available as of: 2005-03-07 ISO 10462:2005 Gas cylinders -- Transportable cylinders for dissolved acetylene -- Periodic inspection and maintenance Edition: 2 | Stage: 90.20 | TC 58/SC 4 ICS: 23.020.30 Document available as of: 2005-03-07 ISO 10461:2005 Gas cylinders -- Seamless aluminium-alloy gas cylinders -- Periodic inspection and testing Edition: 2 | Stage: 90.20 | TC 58/SC 4 ICS: 23.020.30 Document available as of: 2005-03-07 ISO 20421-1:2006 Cryogenic vessels -- Large transportable vacuum-insulated vessels -- Part 1: Design, fabrication, inspection and testing Edition: 1 | Stage: 60.60 | TC 220 ICS: 23.020.40 Document available as of: 2006-04-19 ISO 10464:2004 Gas cylinders -- Refillable welded steel cylinders for liquefied petroleum gas (LPG) -- Periodic inspection and testing Edition: 1 | Stage: 90.60 | TC 58/SC 4 ICS: 23.020.30; 75.200 Document available as of: 2004-08-24 ISO 21029-1:2004 Cryogenic vessels -- Transportable vacuum insulated vessels of not more than 1 000 litres volume -Part 1: Design, fabrication, inspection and tests Edition: 1 | Stage: 90.20 | TC 220 ICS: 23.020.40 Document available as of: 2004-11-26 2) Standards ISO 3951-1:2005 Sampling procedures for inspection by variables -- Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL Edition: 1 | Stage: 60.60 | TC 69/SC 5 ICS: 03.120.30 Document available as of: 2005-04-07 ISO 2859-3:2005 Sampling procedures for inspection by attributes -- Part 3: Skip-lot sampling procedures Edition: 2 | Stage: 60.60 | TC 69/SC 5 ICS: 03.120.30 Document available as of: 2005-05-27 ISO/TR 10064-5:2005 Code of inspection practice -- Part 5: Recommendations relative to evaluation of gear measuring instruments Edition: 1 | Stage: 60.60 | TC 60 ICS: 21.200 Document available as of: 2005-04-19 ISO 11372:2005 Gas cylinders -- Cylinders for dissolved acetylene -- Inspection at time of filling Edition: 2 | Stage: 60.60 | TC 58/SC 4 ICS: 23.020.30 Document available as of: 2005-09-20 Inspection and maintenance of cylinder valves Edition: 1 | Stage: 60.60 | TC 58/SC 2 ICS: 23.ISO 11755:2005 Gas cylinders -.Cylinders for compressed and liquefied gases (excluding acetylene) -.60 | TC 14 ICS: 21. 23.Metric module.60 | TC 58/SC 4 ICS: 23.040.Cylinder bundles for compressed and liquefied gases (excluding acetylene) -Inspection at time of filling Edition: 2 | Stage: 60.30 Document available as of: 2005-06-02 ISO 2859-4:2002 Sampling procedures for inspection by attributes -.Part 3: Inspection Edition: 1 | Stage: 60.020.Part 2: Inspection measuring principles Edition: 2 | Stage: 60.Piston rings -.Measurement methods for exhaust gas emissions during inspection or maintenance Edition: 3 | Stage: 60. side fit -.30.020.30 Document available as of: 2005-09-21 ISO 24431:2006 Gas cylinders -.30 Document available as of: 2006-09-06 3) Standards ISO 6621-2:2003 Internal combustion engines -.060.060.60 | TC 22 ICS: 43.60 | TC 69/SC 5 ICS: 03.60 | TC 22/SC 5 ICS: 13.50.Inspection at time of filling Edition: 1 | Stage: 60. 43.060.01 Document available as of: 2006-08-23 ISO 3929:2003 Road vehicles -.120.020.30 Document available as of: 2002-09-05 ISO 22434:2006 Transportable gas cylinders -.20 Document available as of: 2003-08-21 ISO 4156-3:2005 Straight cylindrical involute splines -.10 Document available as of: 2003-11-10 ISO 3951-5:2006 .Part 4: Procedures for assessment of declared quality levels Edition: 2 | Stage: 90.60 | TC 58/SC 4 ICS: 23.120. 60 | TC 6/SC 5 ICS: 85.Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes Edition: 1 | Stage: 60.30 Document available as of: 2006-03-31 ISO 18893:2004 Mobile elevating work platforms -.60 | TC 69/SC 5 ICS: 03.120.60 | TC 69/SC 5 ICS: 03.Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation) Edition: 1 | Stage: 60.Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection Edition: 1 | Stage: 60.99 Document available as of: 2004-11-18 ISO 8422:2006 Sequential sampling plans for inspection by attributes Edition: 2 | Stage: 60.60 | TC 69/SC 5 ICS: 03.120.20 | TC 214 ICS: 53.120. maintenance and operation Edition: 1 | Stage: 90.Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics Edition: 1 | Stage: 60.Estimation of dirt and shives -.Safety principles.30 Document available as of: 2006-07-04 ISO 5350-4:2006 Pulps -.120.Sampling procedures for inspection by variables -.040 Document available as of: 2006-09-12 ISO 21398:2007 .30 Document available as of: 2006-03-08 ISO 2859-5:2005 Sampling procedures for inspection by attributes -.020.30 Document available as of: 2005-06-27 ISO 3951-2:2006 Sampling procedures for inspection by variables -.120.Part 4: Instrumental inspection by reflected light using Equivalent Black Area (EBA) method Edition: 1 | Stage: 60.30 Document available as of: 2006-10-17 ISO 2859-10:2006 Sampling procedures for inspection by attributes -. inspection.60 | TC 69/SC 5 ICS: 03.60 | TC 69/SC 5 ICS: 03. 30 Document available as of: 2007-04-26 ISO/TR 8550-3:2007 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots -.30 Document available as of: 2007-06-05 ISO/TS 24817:2006 Petroleum.Part 3: Sampling by variables Edition: 1 | Stage: 60.160.Part 1: Acceptance sampling Edition: 1 | Stage: 60.93 | TC 34/SC 5 ICS: 67.040.Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection Edition: 1 | Stage: 60.93 | TC 34/SC 5 ICS: 67.020 Document available as of: 2004-11-25 4) Standards ISO 5538:2004 Milk and milk products -. testing and inspection Edition: 1 | Stage: 60.120. petrochemical and natural gas industries -.60 | TC 69/SC 5 ICS: 03.Hard coal and coke -.60 | TC 69/SC 5 ICS: 03.General guidance on inspection and sampling procedures Edition: 2 | Stage: 90.180.60 | TC 27/SC 4 ICS: 73.30 Document available as of: 2007-06-05 ISO/TR 8550-1:2007 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots -.Hygiene conditions -.20 Document available as of: 2006-12-06 ISO 19078:2006 .100.120.60 | TC 69/SC 5 ICS: 03.10 Document available as of: 2007-05-31 ISO 8086:2004 Dairy plant -.Sampling -. 75.60 | TC 67/SC 6 ICS: 75.Inspection by attributes Edition: 2 | Stage: 90.Guidance to the inspection of mechanical sampling systems Edition: 1 | Stage: 60.01 Document available as of: 2004-11-25 ISO 3951-3:2007 Sampling procedures for inspection by variables -. installation.Composite repairs for pipework -Qualification and design.120. 43.60 | IIW ICS: 25.30 Document available as of: 1999-11-18 .40 Document available as of: 2006-09-29 ISO 11088:2006 Assembly.Quality control techniques and inspection of geometrical and material quality characteristics Edition: 2 | Stage: 60.120.60 | TC 69/SC 5 ICS: 03.60 | TC 123/SC 5 ICS: 21.Part 219: Application protocol: Dimensional inspection information exchange Edition: 1 | Stage: 60.060.160.20 Document available as of: 2006-10-11 ISO/TR 8550-2:2007 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots -.220.Product data representation and exchange -.10 Document available as of: 2007-10-10 ISO 24497-3:2007 Non-destructive testing -.92 | TC 58/SC 4 ICS: 23.40 Document available as of: 2007-12-11 ISO 2859-1:1999 Sampling procedures for inspection by attributes -.60 | TC 184/SC 4 ICS: 25.120.Gas cylinders -.60 | TC 83/SC 3 ICS: 97.Inspection of the cylinder installation. and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles Edition: 1 | Stage: 90.30 Document available as of: 2007-10-09 ISO 12301:2007 Plain bearings -.30.Part 2: Sampling by attributes Edition: 1 | Stage: 60.Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection Edition: 2 | Stage: 90.100.Part 3: Inspection of welded joints Edition: 1 | Stage: 60.40 Document available as of: 2007-11-05 5) Standards ISO 10303-219:2007 Industrial automation systems and integration -.020.93 | TC 69/SC 5 ICS: 03.Metal magnetic memory -. adjustment and inspection of an alpine ski/binding/boot (S-B-B) system Edition: 4 | Stage: 60.040. Primary calibration of transducers Edition: 1 | Stage: 90.40 Document available as of: 1993-06-17 ISO/R 1938:1971 ISO system of limits and fits -.120.Aids to visual inspection -.040.Sampling and inspection Edition: 2 | Stage: 90.100 Document available as of: 1999-07-15 ISO 12713:1998 Non-destructive testing -.Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection Edition: 1 | Stage: 90.100 Document available as of: 1998-07-16 ISO 255:1990 Belt drives -.Secondary calibration of acoustic emission sensors Edition: 1 | Stage: 90.Selection of low-power magnifiers Edition: 2 | Stage: 90.Pulleys for V-belts (system based on datum width) -.30 Document available as of: 1985-08-29 ISO 3443-8:1989 Tolerances for building -.93 | TC 135/SC 9 ICS: 19.93 | TC 41/SC 1 ICS: 21.93 | TC 77 ICS: 91.10 Document available as of: 1990-11-08 ISO 390:1993 Products in fibre-reinforced cement -.Acoustic emission inspection -.10 Document available as of: 1971-04-01 ISO 2859-2:1985 Sampling procedures for inspection by attributes -.93 | TC 135/SC 2 ICS: 19.93 | TC 213 ICS: 17.220.100 Document available as of: 1998-03-12 ISO 12714:1999 Non-destructive testing -.100.Part 8: Dimensional inspection and control of construction work Editi 1 | St 90 60 | TC 59/SC 4 .Part II : Inspection of plain workpieces Edition: 1 | Stage: 90.Geometrical inspection of grooves Edition: 2 | Stage: 90.Acoustic emission inspection -.ISO 3058:1998 Non-destructive testing -.92 | TC 69/SC 5 ICS: 03.93 | TC 135/SC 9 ICS: 19. 140.80 Document available as of: 1987-09-10 ISO 5577:2000 Non-destructive testing -.40 Document available as of: 1980-07-01 ISO 4707:1981 Cork -.80 Document available as of: 1992-05-28 ISO 4986:1992 Steel castings -.80 Document available as of: 1992-05-28 ISO 4993:1987 Steel castings -.040.140.Penetrant inspection Edition: 1 | Stage: 90.Radiographic inspection Edition: 1 | Stage: 90.92 | TC 17/SC 11 ICS: 77.93 | TC 135/SC 3 ICS: 01.20.040.040. 79.20.100 Document available as of: 1984-09-01 ISO 4519:1980 Electrodeposited metallic coatings and related finishes -.Sampling procedures for inspection by attributes Edition: 1 | Stage: 90.140.92 | TC 17/SC 11 ICS: 77.Ultrasonic inspection -.Stoppers -.Vocabulary Edition: 1 | Stage: 90.60 | TC 87 ICS: 55.60 | TC 59/SC 4 ICS: 91.19.20.220.100.100 Document available as of: 2000-05-04 .Edition: 1 | Stage: 90.92 | TC 135/SC 2 ICS: 19.General principles Edition: 1 | Stage: 90.Penetrant inspection -. 77. 19.200 Document available as of: 1989-06-29 6) Standards ISO 3452:1984 Non-destructive testing -. 77.Magnetic particle inspection Edition: 1 | Stage: 90.100 Document available as of: 1981-05-01 ISO 4987:1992 Steel castings -. 77.93 | TC 107/SC 2 ICS: 25.92 | TC 17/SC 11 ICS: 77.040.Sampling for inspection of dimensional characteristics Edition: 1 | Stage: 90. or by related processes -.Part 1: Technical conditions for inspection and delivery Edition: 1 | Stage: 90.Inspection by variables Editi 1 | St 90 93 | TC 34/SC 5 .150.10 Document available as of: 1988-12-08 ISO 7722:1985 Aluminium alloy castings produced by gravity. inspection Edition: 1 | Stage: 90.93 | TC 79/SC 6 ICS: 23.General conditions for inspection and delivery Edition: 1 | Stage: 90.Sampling -.Part 1: Technical conditions for inspection and delivery Edition: 1 | Stage: 90. strips and plates -.ISO 6196-5:1987 Micrographics -.150.150.15. 77.150.10 Document available as of: 1986-11-20 7) Standards ISO 6363-1:1988 Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes -.Part 1: Technical conditions for inspection and delivery Edition: 1 | Stage: 90.93 | TC 79/SC 6 ICS: 77.040.150.080 Document available as of: 1987-09-10 ISO 6361-1:1986 Wrought aluminium and aluminium alloy sheets.Vocabulary -.93 | TC 79/SC 7 ICS: 77.37.10 Document available as of: 1988-12-01 ISO 6365-1:1988 Wrought aluminium and aluminium alloy cold-drawn wire -.93 | TC 171/SC 3 ICS: 01. legibility. or chill casting. tubes and profiles -.93 | TC 79/SC 6 ICS: 23.Part 5: Quality of images. 77.Part 1: Technical conditions for inspection and delivery Edition: 1 | Stage: 90.040.15. sand.040.10 Document available as of: 1985-07-18 ISO 8197:1988 Milk and milk products -.93 | TC 79/SC 6 ICS: 77.10 Document available as of: 1986-11-20 ISO 6362-1:1986 Wrought aluminium and aluminium alloy extruded rods/bars. 37. Part 1: General requirements Edition: 1 | Stage: 90.93 | TC 10 ICS: 01.65 Document available as of: 1986-12-04 ISO 9583:1993 Implants for surgery -.92 | TC 69/SC 5 ICS: 03.30 Document available as of: 1991-11-07 ISO 8591-1:1989 Aerospace -.20 Document available as of: 1991-02-21 ISO 9962-2:1992 Manually operated draughting machines -.93 | TC 105 ICS: 77. performance.Part 2: Characteristics. inspection and marking Edition: 1 | Stage: 90.93 | TC 79/SC 7 ICS: 77.40 Document available as of: 1993-10-07 ISO 9916:1991 Aluminium alloy and magnesium alloy castings -.Liquid penetrant inspection Edition: 1 | Stage: 90.20 Document available as of: 1989-12-07 ISO 8792:1986 Wire rope slings -.Liquid penetrant inspection of metallic surgical implants Edition: 1 | Stage: 90.Safety criteria and inspection procedures for use Edition: 1 | Stage: 90.01 Document available as of: 1988-10-27 ISO 8423:1991 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) Edition: 1 | Stage: 90.40 Document available as of: 1992-07-09 8) Standards ISO 9980:1990 .Edition: 1 | Stage: 90.Wrought aluminium and aluminium alloys -. testing and supply requirements -.100.040.120.040.025.Non-destructive testing -.93 | TC 34/SC 5 ICS: 67.60 | TC 20 ICS: 49.20 | TC 150/SC 1 ICS: 11.Inspection.140.100. 01 Document available as of: 1991-12-05 ISO 11191:1997 Gas cylinders -.92 | TC 110/SC 2 ICS: 53.Characterization of search unit and sound field Edition: 1 | Stage: 90.17E taper thread for connection of valves to gas cylinders -.Part 1: Inspection of corresponding flanks of gear teeth Edition: 1 | Stage: 90.93 | TC 41/SC 1 ICS: 21.Grooved pulleys for V-belts (system based on effective width) -.Inspection and repair of fork arms in service on fork-lift trucks Edition: 1 | Stage: 90.060 Document available as of: 1993-12-09 ISO 13664:1997 .020.Inspection gauges Edition: 1 | Stage: 90.10 Document available as of: 1990-09-20 ISO/TR 10064-2:1996 Code of inspection practice -.140.020.Part 2: Inspection gauges Edition: 1 | Stage: 90.25E taper thread for connection of valves to gas cylinders -.Belt drives -.Part 2: Inspection related to radial composite deviations.Ultrasonic inspection -.93 | TC 135/SC 3 ICS: 19.60 | TC 58/SC 2 ICS: 23.93 | TC 60 ICS: 21.100 Document available as of: 1997-04-10 ISO 10474:1991 Steel and steel products -.30 Document available as of: 1999-03-25 ISO 5057:1993 Industrial trucks -. runout.60 | TC 58/SC 2 ICS: 23.93 | TC 60 ICS: 21.20 | TC 17/SC 20 ICS: 77.Geometrical inspection of grooves Edition: 1 | Stage: 90. tooth thickness and backlash Edition: 1 | Stage: 90.200 Document available as of: 1996-08-08 ISO/TR 10064-1:1992 Code of inspection practice -.220.Inspection documents Edition: 1 | Stage: 90.30 Document available as of: 1997-03-13 ISO 11116-2:1999 Gas cylinders -.200 Document available as of: 1992-01-29 ISO 10375:1997 Non-destructive testing -. 01 Document available as of: 2000-05-25 ISO 14253-1:1998 Geometrical Product Specifications (GPS) -.01 Document available as of: 1998-11-12 ISO 14231:2000 Thermal spraying -.10 Document available as of: 2000-11-30 ISO 3269:2000 Fasteners -.75 Document available as of: 1997-05-01 ISO 13665:1997 Seamless and welded steel tubes for pressure purposes -.040.20 Document available as of: 2000-06-08 ISO 13993:2001 Rental ski shop practice -.20.Magnetic particle inspection of the tube body for the detection of surface imperfections Edition: 1 | Stage: 90.92 | TC 67/SC 4 ICS: 75.180.75 Document available as of: 1997-05-01 9) Standards ISO 13534:2000 Petroleum and natural gas industries -. repair and remanufacture of hoisting equipment Edition: 1 | Stage: 90.040.93 | TC 213 ICS: 17.10.Drilling and production equipment -.Inspection by measurement of workpieces and measuring equipment -.220.92 | TC 17/SC 19 ICS: 23. 77.Part 1: Decision rules for proving conformance or non-conformance with specifications Edition: 1 | Stage: 90. 77.Magnetic particle inspection of the tube ends for the detection of laminar imperfections Edition: 1 | Stage: 90.Sampling and inspection of complete and incomplete alpine ski-bindingb t t i t l li ti .Acceptance inspection of thermal spraying equipment Edition: 1 | Stage: 90.040.040.040.93 | TC 2/SC 7 ICS: 21.Seamless and welded steel tubes for pressure purposes -.140.Inspection. 77.10. maintenance. 77.92 | TC 17/SC 19 ICS: 23.140.Acceptance inspection Edition: 3 | Stage: 90.60 | TC 107 ICS: 25.060.20. 160.93 | TC 60 ICS: 21.Part 3: Recommendations relative to gear blanks.30 Document available as of: 2000-04-06 ISO 14744-2:2000 Welding -.220.Acceptance inspection of electron beam welding machines -.30 Document available as of: 2000-04-06 10) Standards ISO 14744-3:2000 Welding -.93 | TC 44/SC 10 ICS: 25. shaft centre distance and parallelism of axes Edition: 1 | Stage: 90.160.200 Document available as of: 1996-08-08 ISO/TR 10064-4:1998 Code of inspection practice -.93 | TC 60/SC 2 ICS: 21.Acceptance inspection of electron beam welding machines -.160.92 | TC 44/SC 10 ICS: 25.200 Document available as of: 1995-12-14 ISO/TR 10064-3:1996 Code of inspection practice -.Part 2: Measurement of accelerating voltage characteristics Edition: 1 | Stage: 90.20 Document available as of: 2001-09-27 ISO 14104:1995 Gears -.30 Document available as of: 2000-04-13 ISO 14744-4:2000 .93 | TC 83/SC 3 ICS: 97.Acceptance inspection of electron beam welding machines -.boot systems in rental applications Edition: 1 | Stage: 90.Part 1: Principles and acceptance conditions Edition: 1 | Stage: 90.93 | TC 60 ICS: 21.93 | TC 44/SC 10 ICS: 25.Part 4: Recommendations relative to surface texture and tooth contact pattern checking Edition: 1 | Stage: 90.200 Document available as of: 1998-10-15 ISO 14744-1:2000 Welding -.Part 3: Measurement of beam current characteristics Edition: 1 | Stage: 90.Surface temper etch inspection after grinding Edition: 1 | Stage: 90. 01 Document available as of: 1999-12-16 ISO/IEC 17020:1998 General criteria for the operation of various types of bodies performing inspection Edition: 1 | Stage: 90.Portable and wheeled fire extinguishers -.93 | TC 44/SC 10 ICS: 25.30 Document available as of: 2001-10-18 ISO/TS 14253-2:1999 Geometrical Product Specifications (GPS) -.Inspection by measurement of workpieces and measuring i t P t 3 G id li f hi i t t t i t t t t .93 | TC 44/SC 10 ICS: 25.Part 2: Guide to the estimation of uncertainty in GPS measurement. in calibration of measuring equipment and in product verification Edition: 1 | Stage: 90.160.92 | TC 21/SC 2 ICS: 13.60 | TC 58/SC 2 ICS: 23.20 Document available as of: 1998-11-26 ISO 11602-2:2000 Fire protection -.Part 2: Inspection and maintenance Edition: 1 | Stage: 90.Parallel threads for connection of valves to gas cylinders -.160.Part 6: Measurement of stability of spot position Edition: 1 | Stage: 90.Acceptance inspection of electron beam welding machines -.93 | TC 213 ICS: 17.220.Welding -.Acceptance inspection of electron beam welding machines -.30 Document available as of: 2000-04-06 ISO 14744-5:2000 Welding -.120.30 Document available as of: 2000-04-13 ISO 15245-2:2001 Gas cylinders -.020.20 | CASCO ICS: 03.30 Document available as of: 2000-04-13 ISO 14744-6:2000 Welding -.Part 5: Measurement of runout accuracy Edition: 1 | Stage: 90.040.10 Document available as of: 2000-07-20 ISO/TS 14253-3:2002 Geometrical Product Specifications (GPS) -.Inspection by measurement of workpieces and measuring equipment -.Acceptance inspection of electron beam welding machines -.Part 2: Gauge inspection Edition: 1 | Stage: 90.Part 4: Measurement of welding speed Edition: 1 | Stage: 90.160.93 | TC 44/SC 10 ICS: 25. 19.120.080 Document available as of: 2000-04-20 11) Standards ISO 16148:2006 Gas cylinders -.Part 3: Guidelines for achieving agreements on measurement uncertainty statements Edition: 1 | Stage: 90.020.Acoustic emission inspection -.Acoustic emission testing (AT) for periodic inspection Edition: 1 | Stage: 60.30 Document available as of: 2000-06-01 ISO 10725:2000 Acceptance sampling plans and procedures for the inspection of bulk materials Edition: 1 | Stage: 90.01 Document available as of: 2002-10-22 ISO/TR 12031:2000 Micrographics -.180.020.040.Guidelines for cargo inspection Edition: 1 | Stage: 90.93 | TC 28/SC 2 ICS: 75.20 | TC 213 ICS: 17. 19.Periodic inspection and testing of composite gas cylinders Edition: 1 | Stage: 90.93 | TC 171/SC 1 ICS: 37.equipment -.040.Inspection of silver-gelatin microforms for evidence of deterioration Edition: 1 | Stage: 90.60 | TC 58/SC 4 ICS: 23.30 Document available as of: 2006-05-10 ISO 9403:2000 Crude petroleum -.Vocabulary Edition: 1 | Stage: 90.100 Document available as of: 2001-06-21 ISO 11623:2002 Transportable gas cylinders -.60 | TC 58/SC 4 ICS: 23.Transfer accountability -.30 Document available as of: 2002-03-28 ISO 12710:2002 .93 | TC 69 ICS: 03.30 Document available as of: 2000-12-21 ISO 12716:2001 Non-destructive testing -.93 | TC 135/SC 9 ICS: 01.Refillable seamless steel gas cylinders -. 10 Document available as of: 2004-09-10 ISO 5350-1:2006 Pulps -.Visual inspection Edition: 1 | Stage: 60. inspection and marking of production units Edition: 1 | Stage: 60.Part 2: Inspection of mill sheeted pulp by transmitted light Edition: 3 | Stage: 60.Position-indicating lights for life-saving appliances -.60 | TC 8/SC 1 ICS: 47.020.040 Document available as of: 2006-08-09 ISO 24408:2005 Ships and marine technology -.60 | TC 22/SC 2 ICS: 43.Ultrasonic inspection -.Part 2: Inspection measuring principles Edition: 1 | Stage: 90.Part 1: Inspection of laboratory sheets by transmitted light Edition: 3 | Stage: 60.Evaluating electronic characteristics of ultrasonic test instruments Edition: 1 | Stage: 90.Estimation of dirt and shives -.060.Pyrotechnic life-saving appliances -.60 | TC 6/SC 5 ICS: 85.080 Document available as of: 2006-01-20 ISO 5350-3:2007 .Non-destructive testing -.Testing.60 | TC 6/SC 5 ICS: 85.40 Document available as of: 2007-01-10 ISO 15736:2006 Ships and marine technology -.100 Document available as of: 2002-09-26 ISO 18669-2:2004 Internal combustion engines -.040 Document available as of: 2006-08-09 ISO 5350-2:2006 Pulps -.Estimation of dirt and shives -.93 | TC 135/SC 3 ICS: 19.Piston pins -.040.Brake linings frictions materials -.60 | TC 8/SC 1 ICS: 47. inspection and marking of production units Edition: 1 | Stage: 60.60 | TC 22 ICS: 43.Testing.01 Document available as of: 2005-11-10 12) Standards ISO/PAS 22574:2007 Road vehicles -. Estimation of dirt and shives -.140.040 Document available as of: 2007-11-21 ISO 19903:2006 Petroleum and natural gas industries -.Part 232: Application protocol: Technical data packaging core information and exchange Edition: 1 | Stage: 90.60 | TC 184/SC 4 ICS: 25.120.60 | TC 6/SC 5 ICS: 85.60 | TC 17/SC 11 ICS: 77.20 | CASCO ICS: 03.30 Document available as of: 2003-11-13 ISO/IEC 17011:2004 Conformity assessment -. safety requirements and test methods Editi 1 | St 90 92 | TC 214 .60 | TC 67/SC 7 ICS: 75.General technical delivery requirements Edition: 2 | Stage: 60.020.Product data representation and exchange -.80 Document available as of: 2003-11-04 ISO 10303-232:2002 Industrial automation systems and integration -.040.Fittings for use with gasketed mechanical couplings used in piping applications -.180.Performance specification Edition: 1 | Stage: 60.93 | TC 67/SC 6 ICS: 75.Design calculations.Pulps .Piping Edition: 1 | Stage: 90.General requirements for accreditation bodies accrediting conformity assessment bodies Edition: 1 | Stage: 90.10 Document available as of: 2006-11-29 ISO 4990:2003 Steel castings -.20 Document available as of: 2004-09-07 ISO 16368:2003 Mobile elevating work platforms -.Fixed concrete offshore structures Edition: 1 | Stage: 60.200 Document available as of: 2001-06-28 ISO 15838:2003 Ships and marine technology -.60 | TC 8/SC 3 ICS: 47.40 Document available as of: 2002-06-20 ISO 15649:2001 Petroleum and natural gas industries -.Part 3: Visual inspection by reflected light using Equivalent Black Area (EBA) method Edition: 2 | Stage: 60. 120.100.Determination of mechanical properties on rods made of rovingreinforced resin -.030.Determination of mechanical properties on rods made of rovingi f d i P t3 D t i ti f i t th .93 | TC 135/SC 5 ICS: 19.93 | TC 172/SC 1 ICS: 01. 31.92 | TC 214 ICS: 53.70 Document available as of: 2003-04-15 ISO 10110-17:2004 Optics and photonics -.Lead and runout threads -.10. 83.Packaging of uranium hexafluoride (UF6) for transport Edition: 2 | Stage: 60.Heading control systems for high-speed craft Edition: 1 | Stage: 60.Part 2: Determination of flexural strength Edition: 2 | Stage: 90.60 | TC 8/SC 6 ICS: 47.Part 2: Examination practices Edition: 1 | Stage: 90.10 Document available as of: 2002-08-22 ISO 7195:2005 Nuclear energy -.60 | TC 20/SC 4 ICS: 49.120 Document available as of: 2003-09-24 ISO 3597-3:2003 Textile-glass-reinforced plastics -.20.100.100 Document available as of: 2002-07-18 ISO 16329:2003 Ships and marine technology -.Part 17: Laser irradiation damage threshold Edition: 1 | Stage: 90.020 Document available as of: 2004-03-05 ISO 3353-1:2002 Aerospace -.60 | TC 85/SC 5 ICS: 27.Edition: 1 | Stage: 90.99 Document available as of: 2003-09-17 13) Standards ISO 15708-2:2002 Non-destructive testing -.Radiation methods -.20 | TC 61/SC 13 ICS: 59.020.30 Document available as of: 2005-09-06 ISO 3597-2:2003 Textile-glass-reinforced plastics -.020.Preparation of drawings for optical elements and systems -.Computed tomography -. 37.260.Part 1: Rolled external threads Edition: 1 | Stage: 90. Field testing of drilling fluids -.20 Document available as of: 2005-01-05 14) Standards ISO 18934:2006 Imaging materials -. 83.120 Document available as of: 2003-09-29 ISO 17664:2004 Sterilization of medical devices -.20 | TC 61/SC 13 ICS: 59.99 Document available as of: 2002-11-21 ISO 10414-2:2002 Petroleum and natural gas industries -.040.Part 3: Determination of compressive strength Edition: 2 | Stage: 90.080.General requirements for peer assessment of conformity assessment bodies and accreditation bodies Edition: 1 | Stage: 60. 83.60 | TC 42 ICS: 37.Part 4: Determination of apparent interlaminar shear strength Edition: 2 | Stage: 90.99 Document available as of: 2006-05-15 ISO 17357:2002 Ships and marine technology -. 83.20 | TC 8/SC 9 ICS: 47.10 Document available as of: 2002-07-25 ISO 15589-1:2003 .Part 2: Oil-based fluids Edition: 1 | Stage: 90.92 | TC 67/SC 3 ICS: 75.10.Storage environment Edition: 1 | Stage: 60.020.140.180.10.20 | TC 61/SC 13 ICS: 59.Information to be provided by the manufacturer for the processing of resterilizable medical devices Edition: 1 | Stage: 90.99.60 | CASCO ICS: 03.60 | TC 198 ICS: 11.Multiple media archives -.High-pressure floating pneumatic rubber fenders Edition: 1 | Stage: 90.120 Document available as of: 2003-09-29 ISO 3597-4:2003 Textile-glass-reinforced plastics -.01 Document available as of: 2004-02-25 ISO/IEC 17040:2005 Conformity assessment -.reinforced resin -.100.120.100.Determination of mechanical properties on rods made of rovingreinforced resin -. Part 2: Offshore pipelines Edition: 1 | Stage: 90. installation and operation Edition: 1 | Stage: 90.20 Document available as of: 2002-10-17 ISO/TR 14969:2004 Medical devices -.93 | TC 210 ICS: 03.92 | TC 118/SC 1 ICS: 71. and acceptance criteria for.Petroleum and natural gas industries -.60 | TC 35/SC 14 ICS: 87.200.Part 1: On-land pipelines Edition: 1 | Stage: 60.Cathodic protection of pipeline transportation systems -.99.Quality management systems -.140.Corrosion protection of steel structures by protective paint systems -Measurement of.120.Prevention of leakage of flammable oil Edition: 1 | Stage: 60.30 Document available as of: 2002-12-06 ISO 18770:2005 Ships and marine technology -.200 Document available as of: 2003-11-06 ISO 15589-2:2004 Petroleum and natural gas industries -.60 | TC 8/SC 3 ICS: 47.Glass-reinforced plastics (GRP) piping -.Machinery-space flammable oil systems -. 83. the thickness of dry films on rough surfaces Edition: 1 | Stage: 90.020.Guidance on the application of ISO 13485: 2003 Edition: 1 | Stage: 90. chemical and gas service industries -.20 Document available as of: 2005-08-31 ISO 10439:2002 Petroleum.120.01 Document available as of: 2004-10-18 ISO 19840:2004 Paints and varnishes -.Part 4: Fabrication.200 Document available as of: 2004-05-05 ISO 14692-4:2002 Petroleum and natural gas industries -.60 | TC 67/SC 2 ICS: 75. 75.180.040.60 | TC 67/SC 2 ICS: 75. 11.10.Cathodic protection of pipeline transportation systems -.Centrifugal compressors Edition: 1 | Stage: 90.020 Document available as of: 2004-11-03 15) Standards .92 | TC 67/SC 6 ICS: 75. Steel.60 | TC 220 ICS: 23.240 Document available as of: 2003-01-21 ISO 10110-10:2004 Optics and photonics -.020.40 Document available as of: 2004-05-21 ISO 4126-2:2003 Safety devices for protection against excessive pressure -.ISO 19959:2005 Visual examination of the surface condition of investment castings -.80 Document available as of: 2005-04-08 ISO 13631:2002 Petroleum and natural gas industries -.20 | TC 185 ICS: 13.Part 10: Table ti d t f ti l l t d t d bli .Preparation of drawings for optical elements and systems -.Transportable vacuum insulated vessels of not more than 1 000 litres volume -Part 2: Operational requirements Edition: 1 | Stage: 90.Large transportable vacuum-insulated vessels -.180.Packaged reciprocating gas compressors Edition: 1 | Stage: 90.70 Document available as of: 2006-08-03 ISO 20421-2:2005 Cryogenic vessels -. nickel alloys and cobalt alloys Edition: 1 | Stage: 60.40 Document available as of: 2005-06-29 ISO 21009-2:2006 Cryogenic vessels -.Part 2: Operational requirements Edition: 1 | Stage: 60.60 | TC 220 ICS: 23.Static vacuum insulated vessels -.Part 2: Operational requirements Edition: 1 | Stage: 60.60 | TC 172/SC 7 ICS: 11.60 | TC 17/SC 11 ICS: 77.020.40 Document available as of: 2006-10-11 ISO 21029-2:2004 Cryogenic vessels -.20 Document available as of: 2002-08-22 ISO 18369-3:2006 Ophthalmic optics -.Contact lenses -.60 | TC 118/SC 1 ICS: 75.60 | TC 220 ICS: 23.Part 2: Bursting disc safety devices Edition: 1 | Stage: 90.020.140.040.Part 3: Measurement methods Edition: 1 | Stage: 60. 92 | TC 67/SC 6 ICS: 27.Verification of static uniaxial testing machines -.100.20 Document available as of: 2005-10-14 .020 Document available as of: 2004-02-09 ISO 7500-1:2004 Metallic materials -.Verification and calibration of the force-measuring system Edition: 3 | Stage: 90. 75. 37. petrochemical and natural gas industries -.040.20.representing data of optical elements and cemented assemblies Edition: 2 | Stage: 90.Air-cooled heat exchangers Edition: 2 | Stage: 90.30.60 | TC 164/SC 1 ICS: 77.10 Document available as of: 2004-08-13 ISO 13706:2005 Petroleum.180.93 | TC 172/SC 1 ICS: 01.Part 1: Tension/compression testing machines -.060.